Ceramic metals -- Strains and stresses

See also what's at your library, or elsewhere.

• Ceramic metals
• Strains and stresses

• Modulus and rupture and oxidation resistance of Si₂.₅₅Al₀.₆0₀.₇₂N₃.₅₂ Sialon / Alan Arias. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Alan Arias (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Urania-zirconium cermets / by W.G. Rauch. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, 1954), by W. G. Rauch (page images at HathiTrust)
• Preliminary investigation of the fission product retention ability of cermet compacts / by W.E. Moody, Jr., A.J. Taylor, [and] J.R. Johnson. (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1955), by Willis Elvis Moody (page images at HathiTrust)
• Etching of refractories and cermets by ion bombardment / T.K. Bierlein, H.W. Newkirk, B. Mastel. (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by T. K. Bierlein (page images at HathiTrust)
• Construction and testing of surface-combustion furnaces / By Leo Brewer [and] George H. West, Argonne Nat. Laboratory, Lemont, Ill. (Oak Ridge, TN : Atomic Energy Commission, [1946?]), by Leo Brewer (page images at HathiTrust)
• Oxidation behavior of nickel-chromium-aluminum-yttrium - magnesium oxide and nickel-chromium-aluminum-yttrium - zirconate type of cermets / Isidor Zaplatynsky. (Washington : National Aeronautics and Space Administration ; Springfield, Va. : for sale by the National Technical Information Service, 1976), by Isidor Zaplatynsky (page images at HathiTrust)
• Properties of high-temperature ceramics and cermets : elasticity and density at room temperature / S.M. Lang. ([Washington, D.C.] : U.S. Dept. of Commerce, National Bureau of Standards : For sale by the Supt. of Docs., U.S. G.P.O., [1960]. --), by S. M. Lang (page images at HathiTrust)

• Effect of surface condition on strength and fatigue behavior of alumina ceramic / Oak Ridge National Laboratory. (San Diego, CA : Naval Command, Control and Ocean Surveillance Center, RDT&E Division, [1993]) (page images at HathiTrust)

• Fabrication of cermets of uranium nitride and tungsten or molybdenum from mixed powders and from coated particles / by Philip D. Takkunen. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Philip D. Takkunen (page images at HathiTrust)

• Effect of surface condition on strength and fatigue behavior of alumina ceramic / Oak Ridge National Laboratory. (San Diego, CA : Naval Command, Control and Ocean Surveillance Center, RDT&E Division, [1993]) (page images at HathiTrust)

• Effect of magnesium oxide content on oxidation behavior of some superalloy-base cermets / Isidor Zaplatynsky. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Isidor Zaplatynsky (page images at HathiTrust)

• Structural performance of cylindrical pressure housings of different ceramic compositions under external pressure loading. (San Diego, CA : Naval Command, Control and Ocean Surveillance Center, RDT&E Division, 1993-) (page images at HathiTrust)
• Evaluation of nondestructive inspection techniques for quality control of alumina-ceramic housing components / R.R. Kurkchubasche, R.P. Johnson, J.D. Stachiw. (San Diego, CA : Naval Command, Control and Ocean Surveillance Center, RDT&E Division, [1993]), by R. R. Kurkchubasche (page images at HathiTrust)

• Establishing allowable temperature gradients for tungsten-uranium dioxide fuel elements using experimental cyclic strain data / by Ivan B. Fiero. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Ivan B. Fiero (page images at HathiTrust)

• Thermal expansion coefficient mismatch and resultant thermal stress development in porcelain fused to metal specimens : a thesis submitted in partial fulfillment ... restorative dentistry ... / by Terry R. Walton. (1981), by Terry R. Walton (page images at HathiTrust)

• The effect of the addition of pigments on the physical properties of a high expansion magnesia core : thesis submitted in partial fulfillment ... for the degree of Master of Science in Restorative Dentistry (Operative) ... / Socratis Thomaidis. (1995), by Socratis Thomaidis (page images at HathiTrust)

• Joining refractory metal compounds by hot pressing / by John E. Kelley, Donald H. Sumner, and Hal J. Kelly. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1969]), by J. E. Kelley (page images at HathiTrust)
• An analysis of nuclear-rocket nozzle cooling / by Willian H. Robbins, Daniel Bachkin and Arthur A. Medeiros. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, [1960]), by William H. Robbins (page images at HathiTrust)

• Stability of refractory compounds in hydrogen between 4500 ̊and 5000 ̊F, and their compatibility with tungsten / by Charles E. May and Paul D. Hoekstra. (Washington : National Aeronautics and Space Administration, [1961]), by Charles E. May (page images at HathiTrust)

• The ternary-system tantalum-hafnium-carbon at 2050 ̊C / by Daniel L. Deadmore and Isidor Zaplatynsky. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1965]), by Daniel L. Deadmore (page images at HathiTrust)
• Ultrahigh-vacuum creep behavior of columbium and tantalum alloys at 2000 ̊and 2200 ̊F for times greater than 1000 hours / by Robert H. Titran and Robert W. Hall. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Robert H. Titran (page images at HathiTrust)

• Stability of refractory compounds in hydrogen between 4500 ̊and 5000 ̊F, and their compatibility with tungsten / by Charles E. May and Paul D. Hoekstra. (Washington : National Aeronautics and Space Administration, [1961]), by Charles E. May (page images at HathiTrust)

• Study of columbium and tantalum alloys / by Herbert R. Babitzke and Jack G. Croeni. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1968), by Herbert R. Babitzke (page images at HathiTrust)
• High-temperature columbium and tantalum alloys / by H.R. Babitzke, R.E. Siemens, and H. Kato. (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Herbert R. Babitzke (page images at HathiTrust)
• Columbium and tantalum alloy development / by H.R. Babitzke and H. Kato. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1967), by Herbert R. Babitzke (page images at HathiTrust)
• A study of ternary phase diagrams of tungsten and tantalum. (Wright-Patterson Air Force Base, Ohio, Wright Air Development Division, Air Research and Devleopment Command, U. S. Air Force, 1960), by William Rostoker (page images at HathiTrust)
• Mechanical behavior of tantalum-base T-111 alloy at elevated temperature / K.D. Sheffler, J.C. Sawyer, and E.A. Steigerwald. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1969), by Keith D. Sheffler (page images at HathiTrust)
• Long time creep behavior of tantalum - 10 tungsten in high vacuum / Robert H. Titran and William D. Klopp. (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by Robert H. Titran (page images at HathiTrust)

• Mass transfer in a 1370 ̊C (2500 ̊F) lithium thermal-convection loop / by Coulson M. Scheuermann. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Coulson M. Scheuermann (page images at HathiTrust)

• Ultrahigh-vacuum creep behavior of columbium and tantalum alloys at 2000 ̊and 2200 ̊F for times greater than 1000 hours / by Robert H. Titran and Robert W. Hall. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Robert H. Titran (page images at HathiTrust)

• Statistical analysis of high-temperature creep-rate data for alloys of tantalum, molybdenum, and columbium / by William L. Maag and William F. Mattson. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by William L. Maag (page images at HathiTrust)

• Tensile properties from room temperature to 1315 ̊C of tungsten-lined tantalum-alloy (T-111) tubing fabricated by hot isostatic pressing / by Robert J. Buzzard and Robert R. Metroka. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Robert J. Buzzard (page images at HathiTrust)

• Addition of oxygen to and distribution of oxides in tantalum alloy T-111 at low concentrations / Stephan Stecura. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Stephan Secura (page images at HathiTrust)

• Mass transfer in a 1370 ̊C (2500 ̊F) lithium thermal-convection loop / by Coulson M. Scheuermann. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Coulson M. Scheuermann (page images at HathiTrust)
• The ternary-system tantalum-hafnium-carbon at 2050 ̊C / by Daniel L. Deadmore and Isidor Zaplatynsky. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1965]), by Daniel L. Deadmore (page images at HathiTrust)

• Electric-arc furnace reduction of tin slag for production of columbium-tantalum-bearing alloy / by Willard L. Hunter and Oliver C. Fursman. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by W. L. Hunter (page images at HathiTrust)

• Stresses in Aircraft and Shell Structures (New York et al.: McGraw-Hill, 1956), by Paul Kuhn (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. Being lectures on mathematical physics, by Arthur Gordon Webster. (New York, G.E. Stechert & co., [1922]), by Arthur Gordon Webster (page images at HathiTrust)
• Principles of experimental stress analysis. (New York, Prentice-Hall, 1954), by Mark B. Moore (page images at HathiTrust)
• Mechanics of materials / [by] K. Pete Arges and Aubrey E. Palmer. (New York : McGraw-Hill, c1963), by K. Pete Arges (page images at HathiTrust)
• Introduction to the theoretical and experimental analysis of stress and strain, (New York, McGraw-Hill, 1958), by Augusto J. Durelli (page images at HathiTrust)
• The strains in framed structures, with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings. (New York, J. Wiley & sons, 1883), by A. Jay Du Bois (page images at HathiTrust)
• The stresses in framed structures. Including the strength of materials and theory of flexure. By A. Jay Du Bois. (New York, J. Wiley & sons; [etc., etc.], 1896), by A. Jay Du Bois (page images at HathiTrust; US access only)
• A treatise on roofs and bridges, with numerous exercises; (New York, D. Van Nostrand company, 1898), by Edward A. Bowser (page images at HathiTrust)
• Secondary stresses in bridge trusses, (New York, J. Wiley & sons; [etc., etc.], 1908), by Carl Robert Grimm (page images at HathiTrust)
• Stresses in structures and the accompanying deformations. (Columbus, Ohio [Hann & Adair, printers], 1907), by Albert Henry Heller (page images at HathiTrust)
• Statics and strength of materials : an intergrated presentation. (New York : Wiley, 1954), by Roland Henry Trathen (page images at HathiTrust)
• Minimum live loads allowable for use in design of buildings. (Washington, Govt. print. off., 1925), by United States. Dept. of commerce. Building code committee (page images at HathiTrust)
• Über die festigkeit veränderlich elastischer konstruktionen, insbesondere von eisenbetonbauten. Ein beitrag zur erforschung der inneren kräfte und deformationen sowie zum gebrauch bei der berechnung und ausführung armierter betonbalken, -stützen und - gewölbe. Von ingenieur dr. Rudolf Saliger ... (Leipzig, Baumgärtner's buchhandlung, 1904), by Rudolf Saliger (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. By Mansfield Merriman ... (New York, J. Wiley & sons; [etc., etc.], 1896), by Mansfield Merriman (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges, by Isami Hiroi ... 94 illustrations. (New York, D. Van Nostrand company, 1915), by Isamv Hiroi (page images at HathiTrust)
• Structural mechanics. A handbook for engineers, architects, and students. By R.M. Parkinson ... (London, G. Bell & sons [etc.], 1890), by Richard Marion Parkinson (page images at HathiTrust; US access only)
• Strength and elasticity of structural members, by R.J. Woods ... (London, E. Arnold, [1906]), by Richard John Woods (page images at HathiTrust; US access only)
• The theory of stresses in girders and similar structures, with practical observations on the strength and other properties of materials. By Bindon B. Stoney ... (London, Longmans, Green, and co., 1886), by Bindon Blood Stoney (page images at HathiTrust; US access only)
• Architectural mechanics; statics and strength of materials. Notes for Arch. 49 and 50, College of Architecture and Design, University of Michigan. (Ann Arbor, Mich. [Lithoprinted by Edwards Brothers], 1954), by Walter Van Cleve Marshall (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses; arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute by William H. Burr. (New York, Wiley, [c1886]), by William H. Burr (page images at HathiTrust)
• Mechanical behavior of sea ice / Malcolm Mellor. ([Hanover, N.H.] : US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, [1983]), by Malcolm Mellor (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : final report, July, 1978-June 1980 / prepared by C.S. Hartley ... [et al.], Dept. of Materials Science and Engineering, University of Florida ; prepared for Division of Accident Evaluation, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission. (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1981) (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : progress report, July 1, 1977 - June 30, 1978 / C.S. Hartley, Department of Materials Science and Engineering, University of Florida. ([Washington, D.C.] : U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research ; Springfield, Va. : for sale by the National Technical Information Service, [1978]) (page images at HathiTrust)
• A practical treatise on the strength of materials : including their elasticity and resistance to impact / by Thomas Box. (London, New York, E. & F.N. Spon, 1893), by Thomas Box (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses : arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute / by William H. Burr ... (New York : J. Wiley & Sons, 1889), by William H. Burr (page images at HathiTrust)
• Die Festigkeitslehre. Elementares Lehrbuch. (Stuttgart, Bergsträsser, 1902), by R. Lauenstein (page images at HathiTrust; US access only)
• Materials and constructions, a text-book of elementary structural design, by James A. Pratt ... With 85 illustrations. (Philadelphia, P. Blakiston's Son & Co., 1912), by James Alfred Pratt (page images at HathiTrust)
• Mechanics of materials; a treatise on the elasticity and strength of beams, columns, arches, etc., for students of engineering. By Irving P. Church. (New York, J. Wiley & sons, 1887), by Irving P. Church (page images at HathiTrust)
• Maximum stresses under concentrated loads, treated graphically. By Henry T. Eddy ... (New York, D. Van Nostrand Company, 1890), by Henry T. Eddy (page images at HathiTrust)
• Trusses and arches analyzed and discussed by graphical methods / by Charles E. Greene. (New York : John Wiley and Sons, c1890), by Charles E. Greene (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice, furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations / by Herman Haupt. (New York : D. Appleton, 1869), by Herman Haupt (page images at HathiTrust)
• Stresses in structures and the accompanying deformations / by A.H. Heller. (Columbus, Ohio : Hann & Adair, 1905), by A. H. Heller (page images at HathiTrust)
• Analytische ermittelung und anwendung von einflusslinien : einiger im eisenbetonbau häufig vorkommender statisch unbestimmter träger / hrsg. von Rud. Wolle. (Berlin : Ernst & Sohn, [1908]), by Arthur Lederer (page images at HathiTrust; US access only)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... By Dr. Phil. Jacob J. Weyrauch ... With four lithographed plates. Tr. by A. Jay Du Bois ... With an appendix by Robert H. Thurston ... (New-York, J. Wiley & Sons, 1891), by Jakob Johann Weyrauch (page images at HathiTrust)
• Analysis of stresses ; Proportioning the material ; Details of construction ; Details, bills, and estimates ; Streets and highways ; Paving. (Scranton : International Textbook Co., c1903) (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings. Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... (New York, J. Wiley & sons, 1877), by Robert Griffith Hatfield (page images at HathiTrust)
• Applied mechanics. By Captain Allan Cunningham ... (Roorkee, Printed and published at the Thomason college press, 1877), by Allan Joseph Champneys Cunningham (page images at HathiTrust; US access only)
• Stress distribution around resin-grouted bolts / by Daryl E. Radcliffe and Raymond M. Stateham. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1980), by Daryl E. Radcliffe (page images at HathiTrust)
• A method for the prediction of stresses in an isotropic inclusion or orebody of irregular shape / by Martin S. Oudenhoven, Clarence O. Babcock, and Wilson Blake. ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, 1972), by Martin S. Oudenhoven (page images at HathiTrust)
• Distribution of stress in the Westvaco Trona Mine, Westvaco, Wyo. / by Thomas A. Morgan, William G. Fischer, and William J. Sturgis. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1965]), by Thomas A. Morgan (page images at HathiTrust)
• Photoelastic study of an internally stressed circular opening in a biaxial stress field / by M.S. Oudenhoven and G.T. Krempasky. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Martin S. Oudenhoven (page images at HathiTrust)
• Generation and propagation of strain waves in rock : part I / by Leonard Obert and Wilbur I. Duvall. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1950), by Leonard Obert (page images at HathiTrust)
• Some elementary principles of shell stress analysis with notes on the use of the shear center / by Paul Kuhn. (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Paul Kuhn (page images at HathiTrust)
• A semi-graphical method for analyzing strains measured on three or four gage lines intersecting at 45 degrees / by H.N. Hill. (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by H. N. Hill (page images at HathiTrust)
• Versuche über die Widerstandsfähigkeit ebener Platten. Von C. Bach ... (Berlin, Julius Springer, 1891), by Carl Bach (page images at HathiTrust; US access only)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials. By Bindon B. Stoney... (New York, D. Van Nostrand, 1873), by Bindon B. Stoney (page images at HathiTrust)
• Über die berechnung statisch ungestimmter auslegerbrücken. (Berlin : Ernst & Sohn, 1898), by Heinrich F. B. Müller-Breslau (page images at HathiTrust; US access only)
• A practical treatise on the strength of materials: including their elasticity and resistance to impact. (London, New York, E. & F.N. Spon, 1902), by Thomas Box (page images at HathiTrust; US access only)
• Strains in ironwork, a course of eight elementary lectures delivered before the society of engineers, in their hall, session 1882-3, by Henry Adams. (London, E. & F.N. Spon, New York, Spon & Chamberlain, 1898), by Henry Adams (page images at HathiTrust; US access only)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials / by Bindon B. Stoney. (London : Longmans, Green, 1873), by Bindon B. Stoney (page images at HathiTrust; US access only)
• Principles of economy in the design of metallic bridges; by Charles B. Bender. (New York, Wiley, 1891 [c1884]), by Charles B. Bender (page images at HathiTrust)
• A text-book on the mechanics of materials : and of beams, columns, and shafts / By Mansfield Merriman. (New York : Wiley, 1894 [c1890]), by Mansfield Merriman (page images at HathiTrust)
• Schwächung des arbeitsvermögens der materialien durch spannungswechsel, von Friedrich Autenheimer ... (Zürich, Albert Müller, 1894), by Friedrich Autenheimer (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute, by William H. Burr. (New York, Wiley, 1890), by William H. Burr (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, by William H. Burr ... and Myron S. Falk ... (New York, J. Wiley & Sons; [etc., etc.], 1912), by William H. Burr (page images at HathiTrust)
• A treatise on the strength of bridges and roofs, (New York, D. Van Nostrand, 1877), by Samuel Henry Shreve (page images at HathiTrust)
• Bending stresses due to torsion in cantilever box beams / by Paul Kuhn. (Washington, D.C. : National Advisory Committee for Aeronautics, 1935), by Paul Kuhn (page images at HathiTrust)
• Bed shear stress coefficient within the surf zone / by Carlos Severino Veitia Garcia (Monterey, Calif. : Naval Postgraduate School, 1977), by Carlos Severino Veitia Garcia (page images at HathiTrust)
• Ob odnoĭ zadachi͡e stroitelʹnoĭ mekhaniki. (S.-Peterburg, Tip. I͡U.N. Ėrlik, 1904), by A. van der Vliet (page images at HathiTrust; US access only)
• Graficheskīĭ razschet t͡silindricheskikh svodov na osnovanīi teoriīi uprugosti. (S.-Peterburg, Tip. i lit. V.A. Tikhanova, 1898), by N. Zhitkevich (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice, by the late J.B.Johnson...C.W.Bryan...and F.F.Turneaure. (New York, Wiley, 1914-17), by J. B. Johnson (page images at HathiTrust)
• Congrès international des méthodes d'essai des matériaux de construction, tenu à Paris du 9 au 16 juillet 1900...Procès-verbaux, par les sécretaires sous la direction de Debray et Baclé ... (Paris, C. Dunod, 1901), by Congrès international des méthodes d'essai des matériaux de construction, contrib. by France) Exposition universelle internationale de 1900 (Paris (page images at HathiTrust; US access only)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. By Herman Haupt ... (New York, D. Appleton and company, 1883), by Herman Haupt (page images at HathiTrust)
• Deflection and stresses of tapered wood beams, by A.C. Maki and E. W. Kuenzi. (Madison, Wis., U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1965), by A. Carl Maki (page images at HathiTrust)
• Bending of a circular sandwich plate by load applied through an insert / [by H.M. Montrey]. (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by Henry M. Montrey (page images at HathiTrust)
• Gripped-end effect in tension proof testing of dimension lumber / Angela M. Terry ... [et al.]. (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1991]) (page images at HathiTrust)
• Machine stress rating : practical concerns for lumber producers / by William L. Galligan, Delos V. Snodgrass and Gerald W. Crow. (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1977), by W. L. Galligan (page images at HathiTrust)
• Bending properties of four-layer nail-laminated posts / G.D. Williams, D.R. Bohnhoff, R.C. Moody. (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1994]), by G. D. Williams (page images at HathiTrust)
• Effect of deformed shanks, prebored lead holes, and grain orientation on the elastic bearing constant for laterally loaded nail joints / by Thomas Lee Wilkinson. (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Thomas Lee Wilkinson (page images at HathiTrust)
• Fiber stress values for design of glulam timber utility structures / Roland Hernandez, Russell C. Moody, Robert H. Falk. (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1995]), by Roland Hernandez (page images at HathiTrust)
• The application of quaternions to the analysis of internal stress ... by Charles Worthington Comstock, 1898. (Denver, J. B. Stott, printer, 1901), by Charles Worthington Comstock (page images at HathiTrust)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details ... / By A. Jay Du Bois ... (New York : J. Wiley & sons, 1884), by A. Jay Du Bois (page images at HathiTrust; US access only)
• Wood structural design data. (Washington, D. C. :, 1956-), by National Lumber Manufacturers Association (page images at HathiTrust)
• An investigation of the stresses in a discontinuity region of a pressure vessel / William LaVon Greenstreet. (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1958), by William LaVon Greenstreet (page images at HathiTrust)
• Plane stress problems in the mathematical theory of elasticity / [by] Maurice Zaslawsky. (Livermore, CA : University of California Lawrence Radiation Laboratory, 1965), by Maurice Zaslawsky (page images at HathiTrust)
• Stresses induced around mine development workings by undercutting and caving, climax molybdenum mine, Colorado (in two parts). by R.L. Bolmer. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by Robert L. Bolmer (page images at HathiTrust)
• Triaxial method for determining the elastic constants of stress relief cores / by Leonard Obert. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Leonard Adams Obert (page images at HathiTrust)
• Structural design data for concrete drift linings in block caving stopes / by Jay D. Dixon. ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1973]), by J. D. Dixon (page images at HathiTrust)
• Determination of principal stress directions through an analysis of rock joint and fracture orientations, Star Mine, Burke, Idaho / by E.W. Gresseth. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Elbridge W. Gresseth (page images at HathiTrust)
• Investigation of in situ rock stresses, Ruth Mining District, Nevada with emphasis on slope design problems in open-pit mines / by David W. Wisecarver ... [et al.]. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964) (page images at HathiTrust)
• Determination of stresses around an underground opening, Climax Molybdenum Mine, Colorado / by Stephen Utter. (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by Stephen Utter (page images at HathiTrust)
• Biaxial device for determining the modulus of elasticity of stress-relief cores / by John Fitzpatrick. (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by John Fitzpatrick (page images at HathiTrust)
• Development of a rock stress monitoring station based on the flat slot method of measuring existing rock stress / by Louis A. Panek and John A. Stock. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Louis Anthony Panek (page images at HathiTrust)
• Effects of stress relief and other changes in stress on the physical properties of rock / by Leonard Obert. (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by Leonard Obert (page images at HathiTrust)
• Stresses and displacements induced in rock by tunnel boring machine props / by Wilbur I. Duvall and Wilson Blake. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1968]), by Wilbur I. Duvall (page images at HathiTrust)
• Stresses and displacements surrounding an open pit in a gravity-loaded rock / by Wilson Blake. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1967]), by Wilson Blake (page images at HathiTrust)
• Nonuniform radial loads applied to the boundary of a circular hole in an infinite plate / by Wilbur I. Duvall and Wilson Blake. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1967), by Wilbur I. Duvall (page images at HathiTrust)
• A method of determining dynamic tensile strength of rock at minimum loading / by L.O. Bacon. (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by L. O. Bacon (page images at HathiTrust)
• Moments and stresses in slabs, by H. M. Westergaard ... and W. A. Slater ... ([Washington, D. C., National research council, 1921]), by Harold Malcolm Westergaard (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. By Mansfield Merriman. (New York : J. Wiley & sons; [etc., etc.], 1892), by Mansfield Merriman (page images at HathiTrust)
• A text-book on the mechanics of materials and of beams, columns, and shafts ... (New York : [s.n.], 1885), by Mansfield Merriman (page images at HathiTrust)
• Die statik im flugzeugbau, (Berlin, R. C. Schmidt & co., 1917), by Johannes Schwengler (page images at HathiTrust; US access only)
• Biegung, schub und scherung in stäben von zusammengesetzten und mehrteiligen querschnittsformen mit gleichen und wechselnden trägheitsmomenten auf grund der zerlegung in ihre einzelteile mit rechnerischen untersuchungen an beispielen und zeichnerischen darstellungen. Von R. Sonntag ... Mit 173 abbildungen und 11 tafeln. (Berlin, W. Ernst & sohn, 1909), by Richard Sonntag (page images at HathiTrust; US access only)
• The strength of structural elements; a textbook for students, engineers and architects, by Ernest H. Sprague. (London, Scott, Greenwood, 1917), by Ernest H. Sprague (page images at HathiTrust; US access only)
• Stau bei Flussbrücken : begründung einer neuen Stauformel / von A. Hofmann. (Stuttagart : Konrad Wittwer, 1913), by A. Hofmann (page images at HathiTrust; US access only)
• Rahmenformeln. Gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus aisen- oder eisenbetonkonstruktion, nebst anhang mit sonder fällen teilweise und ganz eingespannter träger... (Berlin, Wilhelm Ernst W. Sohn, 1914), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• Statische tabellen, belastungsangaben und formeln zur aufstellung von berechnungen für baukonstruktionen, gesammelt und berechnet von Franz Boerner. (Berlin, W. Ernst & Sohn, 1912), by Franz Boerner (page images at HathiTrust; US access only)
• Structural problems, part II, [by] C.R. Young ... ([Toronto] Engineering Society of the University of Toronto, 1921), by Clarence Richard Young (page images at HathiTrust; US access only)
• Framed structures and girders, theory and practice. Volume I. Stresses, part I. by Edgar Marburg ... (New York, London [etc.] McGraw-Hill book company, 1911), by Edgar Marburg (page images at HathiTrust; US access only)
• Analysis of stress and strain in spherical shells of pyrolytic carbon / J.W. Prados, J.L. Scott. (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by J. W. Prados (page images at HathiTrust)
• The dependence of thermal stresses in cylindrical reactor fuel elements upon the method of cooling / K.R. Merckx. (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by K. R. Merckx (page images at HathiTrust)
• A general method of analysis of primary creep data : (including analysis of uranium creep data) / K.R. Merckx. (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by K. R. Merckx (page images at HathiTrust)
• Studies in mechanics of nonlinear solids / Richard Dong. (Livermore, Ca. : Lawrence Radiation Laboratory, 1964), by Richard Dong (page images at HathiTrust)
• Der Torsionsindikator / von Paul Nettmann. (Berlin : M. Krayn, 1912-), by Paul Nettmann (page images at HathiTrust; US access only)
• Referance book for statical calculations. (Rapid statics.) Force-diagrams for frameworks, tables, instructions for statical calculations etc. for all classes of building and engineering. Published for the practical use of boards of works, architects and engineers, by Francis Ruff ... with 160 illustrations. (London, E. & F.N. Spon, ltd; New York, Spon & Chamberlain, 1905-), by Francis Ruff (page images at HathiTrust; US access only)
• Framed structures and girders, theory and practice ... by Edgar Marburg ... (New York, London, McGraw-Hill Book Company, 1911-), by Edgar Marburg (page images at HathiTrust; US access only)
• Kinetic effects of crowds, by C.J. Tilden ... with discussion by Messrs. Frazer C. Hilder, Henry H. Quimby, R.D. Coombs, J.B. French and C.J. Tilden ... ([New York, 1913]), by Charles Joseph Tilden (page images at HathiTrust)
• Calcul simplifié des poutres droites à plusieurs travées ... (Paris, 1887), by Édouard Linglin (page images at HathiTrust; US access only)
• Stresses in rock outcrops near Atlanta, Ga. / by Verne E. Hooker and Wilbur I. Duvall. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Verne E. Hooker (page images at HathiTrust)
• Recommended building code requirements for working stresses in building materials. Report of Building code committee. June 1, 1926 ... (Washington, Govt. print. off., 1926), by United States. Dept. of commerce. Building code committee (page images at HathiTrust)
• Research summary; a summary of studies conducted prior to July 1952 and related to the field of ship structures. ([Washington], 1953), by United States. Ship Structure Committee (page images at HathiTrust)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... By Dr. Phil. Jacob J. Weyrauch with four lithographed plates. Tr. by A. Jay Du Bois with an appendix by Robert H. Thurston. (New York, J. Wiley & sons, 1877), by Jakob Johann Weyrauch (page images at HathiTrust)
• Elementary aircraft structures, ([Ann Arbor, Mich., Lithoprinted by Edwards brothers, inc.], 1943), by Millard Vernon Barton (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice. (New York, J. Wiley & sons; [etc., etc.], 1911-16), by J. B. Johnson (page images at HathiTrust)
• Principles of economy in the design of metallic bridges; (New York, J. Wiley & sons, 1885), by Charles B. Bender (page images at HathiTrust)
• Theory and practice in designing, by Henry Adams. (New York, D. Van Nostrand company, 1911), by Henry Adams (page images at HathiTrust; US access only)
• The theory of strains in girders and similar structures, with observations on the application of theory to practice, and tables of the strength and other properties of materials. By Bindon B. Stoney ... (London, Longmans, Green and co., 1869), by Bindon Blood 1828-1909 Stoney (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs. Illustrated with numerous wood engravings. By De Volson Wood ... (New York, J. Wiley & Sons, 1876), by De Volson Wood (page images at HathiTrust)
• Die Festigkeitslehre. Elementares Lehrbuch für den Schul- und Selbstunterricht sowie zum Gebrauch in der Praxis, nebst einem Anhang enthaltend Tabellen der Potenzen, Wurzeln, Kreisumfänge und Kreisinhalte. (Stuttgart, A. Bergsträsser, 1901), by R. Lauenstein (page images at HathiTrust; US access only)
• Theory of transverse strains and its application in the construction of buildings. Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... By R. G. Hatfield... (New York, J. Wiley & sons, 1882 [c1877]), by R. G. Hatfield (page images at HathiTrust)
• The strains on structures of ironwork; with practical remarks on iron construction. By F.W. Sheilds ... (London, J. Weale, 1867), by F. W. Sheilds (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute. By William H. Burr. With additions. (New York, J. Wiley & Sons, 1883), by William H. Burr (page images at HathiTrust)
• Maximum stresses in framed bridges / by Prof. Wm. Cain. (New York : D. Van Nostrand, 1878), by Wm. Cain (page images at HathiTrust)
• Theory of steel-concrete arches and of vaulted structures [by] William Cain. (New York, Van Nostrand, 1909), by Wm. Cain (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice / by J.B. Johnson, C.W. Bryan and F.E. Turneaure. (New York : J. Wiley & Sons, 1902, c1893), by J. B. Johnson (page images at HathiTrust; US access only)
• A practical treatise on the strength of material: including their elasticity and resistance to impact. By Thomas Box. (London, New York, E. & F.N. Spon, 1883), by Thomas Box (page images at HathiTrust; US access only)
• Introduction to the mathematical theory of the stress and strain of elastic solids ... (London: Longmans, Green, & Co., 1894), by Benjamin Williamson (page images at HathiTrust; US access only)
• Apparatus for measuring strain and applying stress [with an account of some experiments on the behaviour of iron and steel under stress] By E.G. Coker, D. SC. [Communicated by Dr. C.G. Knott. (With eight plates) (Read 3rd June 1901)] (Montreal, 1902), by E. G. Coker (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / By J. B. Johnson, C. W. Bryan and F. E. Turneaure. (New York : Wiley & Sons ; London : Chapman & Hall, 1903, c1893), by J. B. Johnson (page images at HathiTrust; US access only)
• Die berechnung der rahmenträger, mit besonderer rücksicht auf die anwendung, (Berlin, W. Ernst & sohn, 1919), by Fr. Engesser (page images at HathiTrust; US access only)
• On the stresses developed in beams loaded transversely. By Henry T. Bovey, F.R.S. (Read May 27, 1902) ([Montreal, 1902]), by Henry T. Bovey (page images at HathiTrust; US access only)
• Memoria; punti di rottura e calo totale degli archi gravati di pesi continui, o discontinui. Coefficienti di elasticità delle pietre ... ([Napoli, Trani, 1887]), by Alessandro Bajo (page images at HathiTrust; US access only)
• Rahmenformeln; gebrauchsfertige Formeln für einhüftige, zweistielige, dreieckförmige und geschlossene Rahmen aus Eisen- oder Eisenbeton konstruktion nebst Anhang mit Sonderfällen teilweise und ganz eingespannter Träger. (Berlin, W. Ernst, 1921), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / by J. B. Johnson, C. W. Bryan, and F. E. Turneaure. (New York : J. Wiley, 1895, c1893), by J. B. Johnson (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / by J. B. Johnson ... C. W. Bryan ... and F. E. Turneaure ... (New York : J. Wiley, 1894), by J. B. Johnson (page images at HathiTrust)
• Über spannungslinien, mit anwendung auf den eisenbetonbau ... (Stuttgart, Wittwer, 1917), by Alfred Jackson (page images at HathiTrust; US access only)
• Strength and calculation of dimensions of iron and steel constructions, with reference to the latest experiments. Tr. from the German of J. Weyrauch ... With four folding plates. (New York, D. Van Nostrand, 1877), by Jakob Johann Weyrauch (page images at HathiTrust)
• A new extensometer. By Henry T. Bovey ... (Read May 22, 1901) ([Montreal, 1902]), by Henry T. Bovey (page images at HathiTrust; US access only)
• ... Stresses in structures and the accompanying deformations, by A.H. Heller ... (New York, J. Wiley & sons, inc.; London, Chapman & Hall, limited, 1914), by A. H. Heller (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department Civil Engineering at the Rensselaer Polytechnic Institute. (New York, J. Wiley, 1891), by William H. Burr (page images at HathiTrust)
• Die zusatzkräfte und nebenspannungen eiserner fachwerkbrücken : eine systematische darsteillung der verschiedenen arten ... (Berlin : [s.n.], 1892-1893), by Friedrich Engesser (page images at HathiTrust; US access only)
• A text-book of the strength of materials and of stresses in structures : for use in scientific high schools and schools of technology / by Thomas W. Mather ... (New Haven, Conn. ; Boardman School Press, 1897), by Thomas William Mather (page images at HathiTrust)
• Application of double Fourier series to the calculation of stresses caused by pure bending in a circular monocoque cylinder with a cut-out, ([New York] The Polish institute of arts and sciences in America, 1946), by Zbigniew Krzywoblocki (page images at HathiTrust)
• Manual of moment design, (Topeka, Kan., H. M. Ives & sons, 1941), by Jack Singleton (page images at HathiTrust)
• The fracture of metals / a report to the Bureau of Ships, U. S. Navy, by Maxwell Gensamer [and others] (New York : American Welding Society, c1947), by Maxwell Gensamer (page images at HathiTrust)
• Working stresses for structural design. ([Washington, Govt. Print. Off.], 1958), by United States Army Corps of Engineers (page images at HathiTrust)
• Modified theories of fatigue failure under combined stress, by W. N. Findley [and] P. N. Mathur. [A research project of the Dept. of Theoretical and Applied Mechanics, University of Illinois, sponsored by Office of Ordnance Research, Ordnance Corps, Dept. of the Army. Contract no. DA-11-022-ORD-995, Project no. TB2-0001(313) (Urbana, 1954]), by William N. Findley (page images at HathiTrust)
• On the stability of elastic equilibrium [by] W. T. Koiter. (Washington, National Aeronautics and Space Administration, 1967), by W. T. Koiter (page images at HathiTrust)
• Vorlesungen über Statik der Baukonstruktionen und Festigkeitslehre. (Leipzig, W. Engelmann, 1903-05), by Georg Christoph Mehrtens (page images at HathiTrust; US access only)
• Propagations of waves in solid media. (Ithaca, N.Y., [1951-53]), by Cornell University. School of Mechanical Engineering. Dept. of Engineering Mechanics and Materials (page images at HathiTrust)
• The experimental stress analysis of the Firestone type R-5⁰, 20 x 75 truck rim. By R. M. Phelan assisted by J. F. Hamilton [and others] (Ithaca, N. Y., Machine Design Laboratory, Sibley School of Mechanical Engineering, Cornell University, 1952-55), by Richard M. Phelan (page images at HathiTrust)
• Partially plastic thick-walled cylinders. A portion of a research project entitled plastic behavior of engineering materials. [A research project of the Dept. of Theoretical and Applied Mechanics, Engineering Experiment Station, University of Illinois, sponsored by Wright Air Development Center, U. S. Air Force, Wright-Patterson Air Force Base, Dayton, Ohio. Contract no. AF 33(038)-15677] (Urbana, Dept. of Theoretical and Applied Mechanics, University of Illinois., 1952), by Montogomerie Christie Steele (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design. [By] Karl D. Wood. (Lafayette, Ind., The author; distributed by the Cornell Co-op Society, Ithaca, N. Y., 1939), by Karl Dawson Wood (page images at HathiTrust)
• Analysis of deformations of viscoelastic bodies due to gravitational forces. (Lafayette, Ind., School of Aeronautical Engineering, Purdue University, [1960]), by George Lianis (page images at HathiTrust)
• Buckling of uniformly compressed steel plates in the strain-hardening range. (Bethlehem, Pa., Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by Geerhard Haaijer (page images at HathiTrust)
• Axial tension and bending interaction curves for members loaded inelastically, by D. O. Brush, O. M. Sidebottom and J. O. Smith. A portion of a research project entitled Plastic behavior of engineering materials. [A research project of the Dept. of Theoretical and Applied Mechanics, Engineering Experiment Station, University of Illinois, sponsored by Wright Air Development Center, U. S. Air Force, Wright-Patterson Air Force Base, Dayton, Ohio. Contract no. AF33(038)-15677] (Urbana, Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Don Orr Brush (page images at HathiTrust)
• Finite elastic analysis of an infinite plate with an elliptic hole. (Lafayette, Ind., School of Aeronautical and Engineering Sciences, Purdue University, [1961-), by George Lianis (page images at HathiTrust)
• Piping stress calculations simplified. (Lake Success, N.Y. : S.W. Spielvogel, 1961), by Siegfried Werner Spielvogel (page images at HathiTrust)
• A theory of the non-linear influence of normal stress on fatigue under combined stresses, by J. J. Coleman and W. N. Findley. ([Providence] Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1956), by J. J. Coleman (page images at HathiTrust)
• Theory of statically indeterminate structures / by Walter Maxwell Fife and John Benson Wilbur. (New York : McGraw-Hill, 1937), by Walter Maxwell Fife (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with examples and problems. [By] Karl D. Wood. (Ithaca, N. Y., College of engineering, Cornell university, 1935), by Karl Dawson Wood (page images at HathiTrust)
• Moving loads on railway underbridges, including: diagrams of bending moments and shearing forces and tables of equivalent uniform live loads, by Harry Bamford ... (London New York, Whittaker & co., 1907), by Harry Bamford (page images at HathiTrust; US access only)
• Mechanics of the girder: (New York, J. Wiley and sons, 1886), by John Davenport Crehore (page images at HathiTrust)
• Stresses in girder and roof trusses, for both dead and live loads by simple multiplication : with stress constants for 100 cases. (London : Spon, 1894), by F. R. Johnson (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts / by Mansfield Merriman. (New York : J. Wiley, 1903), by Mansfield Merriman (page images at HathiTrust)
• Stress distributions in engineering materials. (London, [1921]), by British Association for the Advancement of Science (page images at HathiTrust; US access only)
• Curves for calculating beams, channels and reactions; a manual for engineers, architects, designers, draughtsmen, builders and contractors, by Sidney Diamant. (New York, McGraw publishing company, 1908), by Sidney Diamant (page images at HathiTrust; US access only)
• Simplified formulas and tables for floors, joists and beams; roofs, rafters and purlins, (New York, J. Wiley & sons, inc.; [etc., etc.], 1913), by Nathan Clifford Ricker (page images at HathiTrust)
• Economics of construction in relation to framed structures, by Robert H. Bow. (London, New York, E. & F.N. Spon; [etc., etc.], 1873), by Robert H. Bow (page images at HathiTrust; US access only)
• Secondary stresses in bridge trusses. (New York, Wiley, 1908), by C. R. Grimm (page images at HathiTrust)
• Stresses in structural steel angles, with special tables, (New York, John Wiley & sons, inc.; [etc., etc.], 1917), by Leslie Abram Waterbury (page images at HathiTrust)
• Live-load stresses in railway bridges, with formulas and tables, by George E. Beggs ... (New York, John Wiley & sons, inc.; [etc., etc.], 1916), by George Erle Beggs (page images at HathiTrust)
• Tables for finding the strains in railway bridge trusses under the action of a concentrated load system. Reprinted from Strains in framed structures. (New York, Wiley, 1885), by A. Jay Du Bois (page images at HathiTrust)
• Maximum stresses in framed bridges. By Prof. Wm. Cain ... (New York, D. Van Nostrand, 1914), by Wm. Cain (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings : including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... / by R. G. Hatfield ... (New York : J. Wiley & sons, 1889), by R. G. Hatfield (page images at HathiTrust)
• Graphics and structural design, by H.D. Hess. (New York, John Wiley & Sons; [etc., etc.], 1913), by Howard Drysdale Hess (page images at HathiTrust)
• Strength of beams under transverse loads. By william Allan ... (New York, D. Van Nostrand company, 1893), by William Allan (page images at HathiTrust)
• Stresses in structures, by A.H. Heller ... rev. by Clyde T. morris ... (New York, John Wiley & Sons; [etc., etc.], 1916), by Albert Henry Heller (page images at HathiTrust)
• The theory of structures, by R. J. Woods ... with 157 illustrations. (London, E. Arnold, 1909), by Richard John Woods (page images at HathiTrust; US access only)
• A treatise on the strength of bridges and roofs, with practical applications and examples for the use of engineers and students, by Samuel H. Shreve ... (New York, D. Van Nostrand, 1873), by Samuel Henry Shreve (page images at HathiTrust)
• Combined effects of axial load, thermal stress, and creep in flat plates [by] P. C. Huang [and] C. J. Van Der Maas. (Wright-Patterson Air Force Base, Ohio, Wright Air Development Center, Air Research and Development Command, U. S. Air Force, 1958), by P. C. Huang (page images at HathiTrust)
• Stresses in simple framed structures : a text book to accompany exercises in the computation of the axial stresses in the members of load-bearing frames / by Albert Smith ... (Lafayette, Ind. : Printed by the Burt-Haywood company, 1911), by Albert Smith (page images at HathiTrust; US access only)
• Formulas and tables for architects and engineers in calculating the strains and capacity of structures in iron and wood, by F. Schumann, C.E. Illustrated with more than three hundred diagrams, designed and engraved especially for this work by J.C. Lyons. (Washington City, W. Choate & Co., 1873), by Franz Schumann (page images at HathiTrust)
• Development of procedures for rapid computation of dynamic structural response / by J.W. Melin and S. Sutcliffe. Approved by J.D. Haltiwanger and N.M. Newmark. Final report on contract AF33(600)-24994 for Physical Vulnerability Division, Deputy of Targets, Directorate of Intelligence, Headquarters, USAF (Urbana, Ill. : University of Illinois, [1958]), by John William Melin (page images at HathiTrust)
• Analysis of continous frames by graphical distribution of moments, ([Oakland, Calif., Tooley-Towne corporation], c1943), by Anatol Alexander Eremin (page images at HathiTrust)
• Torsion analysis of rolled steel sections / by C.P. Heins, Jr. and P.A. Seaburg (New York, N.Y. : Bethlehem Steel Corp., [1963]), by Conrad P Heins (page images at HathiTrust)
• Moments and shears in a force fitted rectangular plate, general model. Douglas report SM-42391. Prepared by G. Stoffmacher, Space Strength Section. Prepared under the sponsorship of the Douglas Aircraft Company, Independent Research and Development Program, Account no. 81295-354. ([Santa Monica, Calif.] Space Systems Engineering, Missile & Space Systems Division, Douglas Aircraft Co., Inc., 1962), by Inc. Missile and Space Systems Division Douglas Aircraft Company (page images at HathiTrust)
• Release of internal stress in brass tubing / by R.J. Anderson ... [and] Everett G. Fahlman ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1925), by Robert John Anderson (page images at HathiTrust)
• Flow in a low-carbon steel at various temperatures / by H.J. French ... [and] W.A. Tucker ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1925), by Herbert J. French (page images at HathiTrust)
• Development of a method for measurement of internal stress in brass tubing / by Robert J. Anderson ... [and] Everett G. Fahlman ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1924), by Robert John Anderson (page images at HathiTrust)
• Statical hysteresis in the flexure of bars / by G.H. Keulegan. ([Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926]), by Garbis H. Keulegan (page images at HathiTrust)
• Tests of eccentrically loaded columns. (Los Angeles, Dept. of Engineering, University of California, 1954), by R. D. Chipman (page images at HathiTrust)
• Shear tests of reinforced concrete beams / by Willis A. Slater, Engineer Physicist, Arthur R. Lord, Consulting Engineer, Cooperating [and] Roy R. Zipprodt, Associate Engineer, Bureau of Standards. (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926), by Willis Appleford Slater (page images at HathiTrust)
• Tests of large bridge columns / by J.H. Griffith ... and J.G. Bragg ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1918), by John Howell Griffith (page images at HathiTrust)
• Load strain-gage test of 150-ton floating crane for the Bureau of Yards and Docks U.S. Navy Department / by Louis J. Larson, Assistant Engineer Physicist, Richard L. Templin, Assistant Engineer Physicist, Bureau of Standards. (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 151), by Louis John Larson (page images at HathiTrust)
• Stresses caused by cold-rolling / by Henry M. Howe, Consulting Metallurgist, Edward C. Groesbeck, Physical Chemist, Bureau of Standards. May 18, 1920 ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1920), by Henry Marion Howe (page images at HathiTrust)
• Mechanics of internal work (or work of deformation) in elastic bodies and systems in equilibrium, including the method of least work, by Irving P. Church. (New York, J. Wiley & sons; [etc., etc.], 1910), by Irving P. Church (page images at HathiTrust)
• Effect of repeated reversals of stress on double-reinforced concrete beams / by W.A. Slater, ... G.A. Smith, ... H.P. Mueller ... (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1921), by Willis Appleford Slater (page images at HathiTrust)
• Damage to stainless steel fuel in SPERT reactors / by R.E. Heffner. ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1961]), by R. E. Heffner (page images at HathiTrust)
• Modern timber engineering. (New Orleans, Southern Pine Assn., [1949]), by Walter Fleming Scofield (page images at HathiTrust)
• Leçons de mécanique pratique : à l'usage des auditeurs des cours du conservatoire des arts et métiers, et des sous-officiers et ouvriers d'artillerie / par Arthur Morin. (Paris : Libraire Scientifique - Industrielle de L. Mathias (Augustin), 1846-1953), by M. Morin (page images at HathiTrust)
• Influence coefficients for toroidal shells. Uniform internal pressure acting on the convex surface. ([Emeryville, Calif., Shell Development Co., 1958]), by G. D. Galletly (page images at HathiTrust)
• Discontinuity stresses in metallic pressure vessels. [Prepared under the cognizance of the Langley Research Center. Authors: F. L. Rish and L. Kovalevsky. (Washington] National Aeronautics and Space Administration; [for sale by the National Technical Information Service, Springfield, Va.], 1971), by F. L. Rish (page images at HathiTrust)
• Dynamic behavior of cylindrical shells under initial stress, by G. Herrmann and A. E. Armenakas. (New York, Columbia University, Dept. of Civil Engineering and Engineering Mechanics, Institute of Flight Structures, 1960), by George Herrmann (page images at HathiTrust)
• Energy versus stress theories for combined stress; a fatigue experiment using a rotating disc, by W. N. Findley [and others] and Final report on basic research on fatigue failures under combined stress, by W. N. Findley. ([Providence] Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1958), by William N. Findley (page images at HathiTrust)
• A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending. ([Providence] Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1958), by William Nicholas Findley (page images at HathiTrust)
• Structural mechanics, by Harrison W. Hayward, Addison F. Holmes, and Ralph G. Adams. (New York, McGraw-Hill, 1932), by Harrison W. Hayward (page images at HathiTrust)
• A course in modern timber engineering, (New Orleans, Southern pine association, [1942]), by Howard James Hansen (page images at HathiTrust)
• The traverse method in stress analysis. ([Los Angeles, c1948]), by Ralph William Stewart (page images at HathiTrust)
• Dynamic response of materials to intense impulsive loading. Edited by Pei Chi Chou and Alan K. Hopkins. ([Wright Patterson Air Force Base, Ohio, Air Force Materials Laboratory, 1973]), by Pei Chi Chou (page images at HathiTrust)
• Progress report on slip of structural steel double-lap joints assembled with high-strength bolts. 1st- University of Washington, Engineering Experiment Station in cooperation with the Research Council on Riveted and Bolted Structural Joints. (Seattle, 1951-), by University of Washington. Engineering Experiment Station (page images at HathiTrust)
• Trusses and arches analyzed and discussed by graphical methods / by Charles E. Greene. (New York : J. Wiley, 1898-), by Charles E. Greene (page images at HathiTrust; US access only)
• Modern timber engineering, by W. Fleming Scofield and W.H. O'Brien; rev. by William A. Oliver. (New Orleans, Southern Pine Association, [c1963]), by Walter Fleming Scofield (page images at HathiTrust)
• Elements of structural engineering. (New york : Ronald P., 1954), by Ernest C. Harris (page images at HathiTrust)
• Static and dynamic J-R curve testing of A533B steel using the key curve analysis technique / prepared by J.A. Joyce. (Washington, D.C. : The Commission, 1981), by J. A. Joyce (page images at HathiTrust)
• Resistance of materials, for beginners in engineering. (Boston, New York [etc.] Ginn and company, [c1941]), by S. E. Slocum (page images at HathiTrust)
• Statically indeterminate frameworks. (Chapel Hill [N.C.] University of North Carolina Press, 1937), by Thomas Felix Hickerson (page images at HathiTrust)
• Advanced mechanics of materials, (New York and London, McGraw-Hill book company, inc., 1946), by Glenn Murphy (page images at HathiTrust)
• Stress and strength of manufactured parts, (New York, McGraw-Hill, 1950), by Charles Lipson (page images at HathiTrust)
• Residual stress and the yield strength of steel beams, by Ching Huan Yang, Lynn S. Beedle and Bruce G. Johnston. (Bethlehem, Pa., Lehigh University, Department of Civil Engineering and Mechanics. Fritz Engineering Laboratory, 1951), by Ching Huan Yang (page images at HathiTrust)
• Report on the exploratory series of tests on longitudinal distribution of stresses in reinforcing bars. A cooperative project between the American Iron and Steel Institute and Cornell University. (Ithaca, N.Y., 1948), by Cornell University. School of Civil Engineering (page images at HathiTrust)
• The analysis of continuous frames by the method of restraining stiffnesses, by Earle B. Russell. (San Francisco, W. H. Ellison, Earle Russell, consulting structural engineers, 1932), by Earle Brewster Russell (page images at HathiTrust)
• Simplified methods for computing stresses in rigid frame buildings, by Sheldon A. Keast ... ([Philadelphia, Pa., Lefax (inc.), 1938]), by Sheldon A. Keast (page images at HathiTrust)
• Eccentric loads on concrete. (Ann Arbor, Mich., Edwards bros., inc., 1943), by Leonard Thomas Evans (page images at HathiTrust)
• Rayleigh's principle and its applications to engineering; the theory and practice of the energy method for the approximate determination of critical loads and speeds, by G. Temple and W.G. Bickley. ([New York] Dover Publications, [1956]), by George Frederick James Temple (page images at HathiTrust)
• Continuity in concrete building frames. (Chicago, Ill., Portland cement association, [1937]), by Portland Cement Association (page images at HathiTrust)
• Structural frameworks / Clyde T. Morris, Samuel T. Carpenter. (New York : Wiley, c1943), by Clyde T. Morris (page images at HathiTrust)
• Continuity in concrete building frames; practical analysis for vertical load and wind pressure. (Chicago, Ill., Portland cement association, [1942]), by Portland Cement Association (page images at HathiTrust)
• Theory of limit design. (New York, J. Wiley, [1948]), by John Abraham Van den Broek (page images at HathiTrust)
• Wood structural design data. ([Washington], 1943-), by National Lumber Manufacturers Association (page images at HathiTrust)
• Translation key to Kleinlogel's Rahmenformeln by F. S. Morgenroth. (New York, Frederick Ungar Publishing Co., [1945]) (page images at HathiTrust)
• Analysis of continuous frames by the method of restraining stiffnesses, (San Francisco, Ellison and Russell, [c1934]), by Earle Brewster Russell (page images at HathiTrust)
• Working stresses. (New Brunswick [N.J.] Rutgers University Press, 1940), by Joseph Marin (page images at HathiTrust)
• Design, construction and testing of a plywood hyperbolic paraboloid lattice structure, by Willard Strode and Donald L. Dean. (Lawrence, Kan., University of Kansas, 1958), by Willard Strode (page images at HathiTrust)
• Gross panel strength under combined loading / by Alaa E. Mansour. (Washington : Ship Structure Committee ; [Springfield, Va. : For sale by the National Technical Information Service], 1977), by A. E. Mansour (page images at HathiTrust)
• Examination of service and stress data of three ships for development of hull girder load criteria / by J.F. Dalzell and N.M. Maniar and M.W. Hsu. (Washington, D.C. : U.S. Coast Guard Headquarters, 1979), by J. F. Dalzell (page images at HathiTrust)
• Updating of fillet weld strength parameters for commercial shipbuilding. ([Washington, D.C.] : Ship Structure Committee ; [Springfield, Va. : National Technical Information Service, distributor], 1984) (page images at HathiTrust)
• Fracture control for fixed offshore structures. ([Washington, D.C.] : Ship Structure Committee ; [Springfield, Va. : National Technical Information Service, distributor], 1985) (page images at HathiTrust)
• Fundamentals of stress analysis, by Albert Deyarmond and Albert Arslan, prepared and edited by Associated aeronautical staff of Aero publishers. (Glendale, Calif., Aero publishers, [c1960-), by Albert Deyarmond (page images at HathiTrust)
• Structural deflections; a literature and state-of-the-art survey [by] T. V. Galambos [and others. (Washington] U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1973) (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations, (Boulder, Colo., c1949), by Karl Dawson Wood (page images at HathiTrust)
• Paper for first symposium on naval structural mechanics plasticity. (Providence, Division of Applied Mathematics, Brown University, 1958), by Daniel C. Drucker (page images at HathiTrust)
• Theory and practice in designing, by Henry Adams ... (London, Constable & company ltd., 1911), by Henry Adams (page images at HathiTrust; US access only)
• Proceedings of the Society for Experimental Stress Analysis. (Cambridge, Mass.), by Society for Experimental Stress Analysis (page images at HathiTrust)
• Light airplane crash tests at three pitch angles / Victor L. Vaughan Jr. and Emilio Alfaro-Bou. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : National Technical Information Service], 1979), by Victor L. Vaughan (page images at HathiTrust)
• Materials constitutive modes for nonlinear analysis of thermally cycled structures / Albert Kaufman, Larry E. Hunt. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Albert Kaufman (page images at HathiTrust)
• Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder / Randall C. Davis. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Randall C. Davis (page images at HathiTrust)
• Pressures, forces and moments, and shock shapes for a geometrically matched sphere-cone and hyperboloid at Mach 20.3 in helium / Robert L. Calloway (Washington, D.C. : National Aeronatics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by Robert L. Calloway (page images at HathiTrust)
• Torsional instabilities in composite and composite-reinforced aluminum-alloy thin-walled cylinders / Donald E. Marlowe. (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards, 1972), by Donald E. Marlowe (page images at HathiTrust)
• Tensile behavior of boron/epoxy-reinforced 7075-T6 aluminum alloy at elevated temperatures / Daniel J. Chwirut and George F. Sushinsky. (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards, 1974), by Daniel J. Chwirut (page images at HathiTrust)
• Stress waves through projectile joints and interfaces / James M. Bender. (Aberdeen Proving Ground, Md. : U.S. Army Laboratory Command, Ballistic Research Laboratory, [1989]), by James M. Bender (page images at HathiTrust)
• Concrete quality assurance using accelerated strength testing / by Steven A. Ragan. (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; [Springfield, Va. : available from NTIS, 1984]), by Steven A. Ragan (page images at HathiTrust)
• Stress intensity and crack displacement for small edge cracks / Thomas W. Orange. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1988), by Thomas W. Orange (page images at HathiTrust)
• Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP) : a proposal / James F. Saltsman and Gary R. Halford. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1988), by James F. Saltsman (page images at HathiTrust)
• Mixed finite element models for free vibrations of thin-walled beams / Ahmed K. Noor, Jeanne M. Peters, and Byung-Jin Min. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; [Springfield, Va. : For sale by the National Technical Information Service], 1989), by Ahmed Khairy Noor (page images at HathiTrust)
• Thermal and structural tests of René 41 honeycomb integral-tank concept for future space transportation systems / John L. Shideler ... [et al.]. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992) (page images at HathiTrust)
• Analyses of surface cracks in finite plates under tension or bending loads / J.C. Newman, Jr., I.S. Raju. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by J. C. Newman (page images at HathiTrust)
• Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis / Albert Kaufman, Shoi Y. Hwang. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Albert Kaufman (page images at HathiTrust)
• An update of the total-strain version of SRP / James F. Saltsman and Gary R. Halford. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by James F. Saltsman (page images at HathiTrust)
• Hertzian contact in two and three dimensions / John H. Tripp. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by John H. Tripp (page images at HathiTrust)
• Joint design for improved fatigue life of diffusion-bonded box-stiffened panels / Randall C. Davis, Paul L. Moses, Russell S. Kanenko. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Randall C. Davis (page images at HathiTrust)
• Nonlinear equations for dynamics of pretwisted beams undergoing small strains and large rotations / Dewey H. Hodges. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Dewey H. Hodges (page images at HathiTrust)
• Predicted and measured strain responses of isotropic panels to base excitation / Karen H. Lyle, Jack D. Leatherwood and Edward F. Daniels. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by Karen H. Lyle (page images at HathiTrust)
• Delamination stresses in semicircular laminated composite bars / William L. Ko. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by William L. Ko (page images at HathiTrust)
• Procedures for characterizing an alloy and predicting cyclic life with the total strain version of strainrange partitioning / James F. Saltsman and Gary R. Halford. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by James F. Saltsman (page images at HathiTrust)
• Tensile stress-strain behavior of boron/aluminum laminates / J.A. Sova, and C.C. Poe, Jr. ([Washington] : National Aeronoautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978), by J. A. Sova (page images at HathiTrust)
• A nonlinear high temperature fracture mechanics basis for Strainrange Partitioning / Takayuki Kitamura and Gary R. Halford. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Takayuki Kitamura (page images at HathiTrust)
• Analysis and testing of axial compression in imperfect slender truss struts / Mark S. Lake and Nicholas Georgiadis. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Mark S. Lake (page images at HathiTrust)
• Open-mode delamination stress concentrations in horseshoe and elliptic composite curved bars subjected to end forces / William L. Ko and Raymond H. Jackson. (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, VA : For sale by the National Technical Information Service, 1990), by William L. Ko (page images at HathiTrust)
• Light airplane crash tests at three roll angles / Claude B. Castle and Emilio Alfaro-Bou. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Claude B. Castle (page images at HathiTrust)
• A critical examination of stresses in an elastic single lap joint / Paul A. Cooper and James Wayne Sawyer. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Paul A. Cooper (page images at HathiTrust)
• An improved transverse shear deformation theory for laminated anisotropic plates / M.V.M. Murthy. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by M. V. V. Murthy (page images at HathiTrust)
• Elastic-plastic finite-element analysis of thermally cycled double-edge wedge specimens / Albert Kaufman and Larry E. Hunt. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Albert Kaufman (page images at HathiTrust)
• Effects of static tensile load on the thermal expansion of Gr/PI composite material / Gary L. Farley. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by Gary L. Farley (page images at HathiTrust)
• An assessment of the accuracy of orthotropic photoelasticity / M.W. Hyer and D.H. Liu ; prepared for Langley Research Center. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1984), by M. W. Hyer (page images at HathiTrust)
• On the determination of micromorphic material constants from properties of the constituents / by Richard F. Maye. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1969), by Richard F. Maye (page images at HathiTrust)
• Stresses in a webbed ball / L.J. Nypan. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Lester J. Nypan (page images at HathiTrust)
• Experimental evaluation of stresses in spherically hollow balls / by L.J. Nypan. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Lester J. Nypan (page images at HathiTrust)
• Experimental evaluation of stresses in cylindrically hollow (drilled) balls / by L.J. Nypan. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Lester J. Nypan (page images at HathiTrust)
• DESAP 1 : a structural design program with stress and displacement constraints / J. Kiusalaas and G.B. Reddy. (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977) (page images at HathiTrust)
• Spin test of turbine rotor / by Michael H. Vavra, James E. Hammer, and Lawrence E. Bell. (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1972]), by Michael H. Vavra (page images at HathiTrust)
• Dynamic response of high-frequency pressure transducers to large amplitude sinusoidal pressure oscillations / by Richard E. Robinson. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by Richard E. Robinson (page images at HathiTrust)
• A Study of the stress wave factor technique for the characterization of composite materials / Edmund G. Henneke II ... [et al.] ; prepared for Lewis Research Center. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983) (page images at HathiTrust)
• Tensile stress-strain behavior of graphite/epoxy laminates / D.P. Garber ; prepared for Langley Research Center under contract NAS1-16000. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by D. P. Garber (page images at HathiTrust)
• Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints : summary / J.B. Cushman, S.F. McCleskey, and S.H. Ward ; prepared for Langley Research Center. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by J. B. Cushman (page images at HathiTrust)
• Fatigue damage under varying stress amplitudes / by H.W. Liu and H.T. Corten. (Washington : National Aeronautics and Space Administration, [1960]), by H. W. Liu (page images at HathiTrust)
• Stress concentrations in filament-stiffened sheets of finite length / W.B. Fichter. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by W. B. Fichter (page images at HathiTrust)
• Estimation of stiffening effect of shaft and housing material outside projected area of a rolling element bearing / Christopher M. Taylor ; Lewis Research Center. (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Christopher M. Taylor (page images at HathiTrust)
• A numerical procedure for calculating stress and deformation near a slit in a three-dimensional elastic-plastic solid / David J. Ayres. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by David J. Ayres (page images at HathiTrust)
• Effect of a load-alleviating structure on the landing behavior of a reentry-capsule model / by Edward L. Hoffman, Sandy M. Stubbs and John R. McGehee. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1961]), by Edward L. Hoffman (page images at HathiTrust)
• Non-Hookean, premacroyield stress-strain behavior of several ionic single crystals / by Carl A. Stearns and Edward R. Gotsky. (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1964]), by Carl A. Stearns (page images at HathiTrust)
• Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature / Avraham Berkovits. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, 1962]), by Avraham Berkovits (page images at HathiTrust)
• Stress-strain behavior of tungsten-fiber-reinforced copper composites / by David L. McDanels, Robert W. Jech, and John W. Weeton. (Washington, D.C. : National Aeronautics and Space Administration, [1963]), by David L. McDanels (page images at HathiTrust)
• Investigation of the response of multiweb beams to static and dynamic loading. Wilbur B. Fichter and Eldon E. Kordes. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by W. B. Fichter (page images at HathiTrust)
• Effects of creep stress on particulate aluminum-copper alloys / by E.E. Underwood and G.K. Manning. (Washington : National Aeronautics and Space Administration, [1959]), by Ervin E. Underwood (page images at HathiTrust)
• A tabulation of wind-tunnel pressure data and section aerodynamic characteristics at Mach numbers of 1.61 and 2.01 for a reflex cambered wing and a cambered and twisted wing having the same swept planform / by Emma Jean Landrum. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by Emma Jean Landrum (page images at HathiTrust)
• A preliminary experimental investigation of an energy-absorption process employing frangible metal tubing / by John R. McGehee. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by John R. McGehee (page images at HathiTrust)
• Investigations of grain-boundary stress concentrations in silver chloride / by L.E. Goodman. (Washington : National Aeronautics and Space Administration, [1961]), by Lawrence E. Goodman (page images at HathiTrust)
• An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries / J.C. Newman, Jr. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1971), by J. C. Newman (page images at HathiTrust)
• Mechanical failures of metals in service / [by] John A. Bennett and G. Willard Quick. ([Washington, D.C.] : U.S. Dept. of Commerce, National Bureau of Standards, 1954), by John Alonzo Bennett (page images at HathiTrust)
• An investigation of the load-deformation characteristics of reinforced concrete beams up to the point of failure, (Urbana, 1952), by James Raymond Gasten (page images at HathiTrust)
• Piping : flexibility and stresses / by S.D. Vinieratos and D.R. Zeno. (New York : Cornell Maritime Press, 1941), by Spiros Dionisios Vinieratos (page images at HathiTrust)
• Die Äussern und innern Kräfte an statisch bestimmten Brücken- und Dachstuhlconstructionen. (Zürich, 1875), by L. Tetmajer (page images at HathiTrust; US access only)
• Evaluation of residual stress. (New York : McGraw-Hill Book Co., 1948), by Kalman Heindhofer (page images at HathiTrust)
• Modern timber engineering, by W. Fleming Scofield and W. H. O'Brien; rev. by Thomas E. Brassell. (New Orleans, Southern Pine Association, [c1954]), by Walter Fleming Scofield (page images at HathiTrust)
• Design of beams and columns / by I.C.S. Staff. (Scranton, Pa. : International Textbook Co., c1930), by International Correspondence Schools (page images at HathiTrust)
• Modern timber engineering, by W. Fleming Scofield and W.H. O'Brien; rev. by William A. Oliver. (New Orleans : Southern Pine Association, [c1963]), by Walter Fleming Scofield (page images at HathiTrust)
• Dynamics, construction of machinery, equilibrium of structures and the strength of materials / by G. Finden Warr. (London : Robert Baldwin, 1851), by George Finden Warr (page images at HathiTrust)
• Leçons de mécanique pratique ... par Arthur Morin ... (Paris, L. Hachette et cie, 1857), by M. Morin (page images at HathiTrust)
• Piping stress calculations simplified. (Lake Success, N.Y., c1951), by Siegfried Werner Spielvogel (page images at HathiTrust)
• Handbook of rigid frame analysis, (Ann Arbor, Mich., Printed by Edwards brothers, inc., c1934), by Leonard Thomas Evans (page images at HathiTrust)
• Résistance des matériaux appliquée aux constructions. Méthodes pratiques par le calcul et la statique graphique ... (Paris, Vve C. Cunod, 1904-08 [1907]), by Ernest Aragon (page images at HathiTrust; US access only)
• Graphics and structural design, by H. D. Hess. (New York, John Wiley & sons, inc.; [etc., etc.], 1915), by Howard Drysdale Hess (page images at HathiTrust; US access only)
• A manual for the design of piping for flexibility by the use of graphs ([Detroit] The Detroit Edison company, c1934), by Edwin A. Wert (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, by William H. Burr ... and Myron S. Falk ... (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1905), by William H. Burr (page images at HathiTrust; US access only)
• Statische untersuchung der aus ebenen tragflächen zusammengesetzten räumlichen tragwerke. Von dr. H. Schwyzer ... (Zürich, Druck von gebr. Leemann & co., 1920), by Hermann Schwyzer (page images at HathiTrust; US access only)
• Arch dam investigation. v. 1-3. ([New York, 1928-34]), by Engineering Foundation (U.S.) Committee on Arch Dam Investigation (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. By Mansfield Merriman. (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1895), by Mansfield Merriman (page images at HathiTrust; US access only)
• The theory of strains. A compendium for the calculation and construction of bridges, roofs and cranes, with the application of trigonometrical notes. By John H. Diedrichs. (Baltimore, Schmidt & Trowe, 1871), by John H. Diedrichs (page images at HathiTrust)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice. By Herman Haupt. (New York, Philadelphia, Appleton, 1851), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. by Herman Haupt. (New York, D. Appleton and Company, 1865), by Herman Haupt (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures : and their strength, consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. / by William Humber. (New York : D. Van Nostrand, 1869), by William Humber (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. by Herman Haupt. (New York, D. Appleton and Co., 1862), by Herman Haupt (page images at HathiTrust)
• Théorie de la résistance de la torsion et de la flexion plane des solides... par J.-B. Belanger. (Paris, Mallet-Bachelier [etc.], 1862), by Jean-Baptiste-Charles-Joseph Bélanger (page images at HathiTrust)
• Elastic constants and sound velocities. by Henry L. Laquer. (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1949), by Henry L. Laquer (page images at HathiTrust)
• Allowable loads on eccentrically loaded concrete columns / by I.E. Morris. (Atlanta : Morris, 1947), by I. E. Morris (page images at HathiTrust)
• Strength of materials; a first course, by Norman C. Riggs [and] Max M. Frocht. (New York, Ronald Press, [c1938]), by Norman C. Riggs (page images at HathiTrust)
• Mechanics of materials. (Chicago, Irwin-Farnham Pub. Co., 1948), by Glenn Murphy (page images at HathiTrust)
• Thermal ratcheting / by J. E. Burke [and] Anna M. Turkalo. (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1951), by J. E. Burke (page images at HathiTrust)
• Temperature and stress formulae for cylinders with heat generated in the material / by C. F. Leyse. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1953), by C. F. Leyse (page images at HathiTrust)
• Elastic constants and sound velocities. by Henry L. Laquer. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1949), by Henry L. Laquer (page images at HathiTrust)
• Mechanical properties of materials and design. (New York McGraw-Hill, 1942), by Joseph Marin (page images at HathiTrust)
• Structural frameworks; a new method of analysis, with tables, by Thomas F. Hickerson. (Chapel Hill, The University of North Carolina Press, 1934), by Thomas Felix Hickerson (page images at HathiTrust)
• Douglas fir use book. (Seattle, Wash. : West Coast Lumbermen's Association, 1930-), by West Coast Lumbermen's Association (page images at HathiTrust)
• Elementary theory and design of flexural members / by Jamison Vawter and James G. Clark. (New York : Wiley, 1950), by Jamison Vawter (page images at HathiTrust)
• A.C.S.R. graphic method for sag-tension calculations. (Pittsburgh : Aluminum Company of America, 1927) (page images at HathiTrust)
• The determination of the safe working stress for railway bridges of wrought iron and steel ... ([Calcutta?, 1899?]), by E Herbert Stone (page images at HathiTrust; US access only)
• Abaques; des efforts tranchants, et des moments de flexion développés dans les poutres à une travée par les surcharges du règlement du 29 août 1891 sur les ponts métalliques. (Paris, G. Carré & C. Naud, 1899), by Marcelin Duplaix (page images at HathiTrust; US access only)
• The failure of plain and spirally reinforced concrete in compression / by Frank E. Richart, Anton Brandtzaeg, and Rex L. Brown (Urbana, Ill. : Engineering Experiment Station, University of Illinois, [1929]), by Frank E. Richart (page images at HathiTrust)
• Studies of slab and beam highway bridges (Urbana, Ill. : Engineering Experiment Station, University of Illinois, 1946-) (page images at HathiTrust)
• Solutions for certain rectangular slabs continuous over flexible supports : a report of an investigation conducted by the Engineering Experiment Station, University of Illinois in cooperation with the United States Bureau of Public Roads and the Illinois Division of Highways / by Vernon P. Jensen (Urbana, Ill. : University of Illinois, Engineering Experiment Station, [1938]), by Vernon Peter Jensen (page images at HathiTrust)
• Field investigation of prestressed reinforced concrete highway bridges : instrumentation for long-term field investigations / by R.J. Reynolds [and] W.L. Gamble (Urbana, Ill. : University of Illinois, [1967]), by Robert James Reynolds (page images at HathiTrust)
• Wood structural design data. ([Washington], 1941-), by National Lumber Manufacturers Association (page images at HathiTrust)
• Plastic deformation of metals : survey of literature, 1940-1946 / compiled by the Subcommittee on Plastic Flow of the American Iron and Steel Institute Research Committee ; Anson Hayes, chairman, W. O. Everling, [and] E. C. Smith. (New York : American Iron and Steel Institute, c1948), by American Iron and Steel Institute (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, by William H. Burr and Myron S. Falk. (New York, J. Wiley & sons; [etc., etc.], 1908), by William H. Burr (page images at HathiTrust; US access only)
• Mechanical behavior of engineering materials. (Englewood Cliffs, N.J. : Prentice-Hall, 1962), by Joseph Marin (page images at HathiTrust)
• Statically indeterminate frameworks. (Chapel Hill, University of North Carolina Press, 1949), by Thomas Felix Hickerson (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. Being lectures on mathematical physics, by Arthur Gordon Webster. (New York, G.E. Stechert & co., 1942), by Arthur Gordon Webster (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and stress analysis calculations, with particular emphasis on economics of design. [By] Karl D. Wood ... (Lafayette, Ind., The author; Distrib. by Cornell Co-op Society, Ithaca, N.Y., 1941), by Karl Dawson Wood (page images at HathiTrust)
• Graphical analysis of stresses involved in designing frame structures : intended primarily for students of engineering / by G. P. Schubert ... (Hancock, Mich. : [s.n.], 1923), by George Peter Schubert (page images at HathiTrust)
• Notes on the strength of materials and the stability of structures. : Printed for the civil engineering classes in Union College. (Schenectady, N.Y. : Wiseman, Russell, printers & stereotypers, 1870), by W. M. Gillespie (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies; being lectures on mathematical physics. (New York, Hafner, 1949), by Arthur Gordon Webster (page images at HathiTrust)
• Formulas and tables for architect and engineers in calculating the strains and capacity of structures in iron and wood. (Washington city : W. Choate & co., 1873), by Franz Schumann (page images at HathiTrust)
• A treatise on the strength of bridges and roofs. (New York : D. Van Nostrand, 1873), by Samuel Henry Shreve (page images at HathiTrust)
• Strength of beams under transverse loads / By Prof. W. Allan ... (New York : D. Van Nostrand, 1875), by William Allan (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations / By Herman Haupt ... (New York : D. Appleton and company, 1856), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations / By Herman Haupt ... (New York : D. Appleton and company, 1873), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice ... by Herman Haupt. (New York : D. Appleton, 1851), by Herman Haupt (page images at HathiTrust; US access only)
• Fatigue of metals; (New York, N.Y., The Nitralloy corporation, [1942]), by David Landau (page images at HathiTrust)
• Résistance des matériaux, par Arthur Morin ... (Paris, L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• Analysis of simply supported grids of perpendicular beams / F.J. Witt. (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by F. J. Witt (page images at HathiTrust)
• Structural analysis. (Scranton, International Textbook Co., [1960]), by Jack C. McCormac (page images at HathiTrust)
• Practical wind bracing; a book containing easy and rapid methods of figuring wind stresses in high buildings, by Harry E. Schneider ... (Buffalo, N.Y., 1930), by Harry Ellsworth Schneider (page images at HathiTrust)
• New formulas for the loads and deflections of solid beams and girders. By William Donaldson ... (London, New York, E. & F.N. Spon, 1872), by William Donaldson (page images at HathiTrust)
• Steel structures, stresses in simple structures. (New York : McGraw-Hill, 1926), by Leonard Church Urquhart (page images at HathiTrust)
• A treatise on bracing with its application to bridges and other structures of wood or iron... (New York : D. Van Nostrand, 1874), by Robert H. Bow (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice. By J. B. Johnson ... C. W. Bryan and F. E. Turneaure ... (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1905), by J. B. Johnson (page images at HathiTrust; US access only)
• Investigation of ship mooring forces; final report (Sierra Madre, Calif., 1953), by McGraw and Shapiro Carr (page images at HathiTrust)
• Moment distribution; a rapid method of analysis for rigid-jointed structures. With a foreword by R. H. Evans. (New York, Wiley, 1961), by Edgar Lightfoot (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations, with emphasis on the economics of design. (Boulder, Colo., c1947), by Karl Dawson Wood (page images at HathiTrust)
• Strains in ironwork. A course of eight elementary lectures delivered before the Society of engineers, in their hall, session 1882-3. By Henry Adams. (London, New York, E. & F. N. Spon, 1884), by Henry Adams (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures, and their strength; consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. etc. By William Humber ... (London, C. Lockwood & son, 1891), by William Humber (page images at HathiTrust)
• Investigation on buckling of rigid joint structures. Sponsored jointly by Bureau of Public Roads and Column Research Council. First progress report, by P. P. Bijlaard; edited by George Winter. (Ithaca, N. Y., 1949), by Cornell University. Department of Structural Engineering (page images at HathiTrust)
• Stress analysis and design of elementary structures. (New York, J. Wiley, [1948]), by James H. Cissel (page images at HathiTrust)
• Timber engineers' handbook / edited by Howard J. Hansen. (New York : J. Wiley, 1948) (page images at HathiTrust)
• Fundamentals of stress analysis / by Albert Deyarmond, Albert Arslan. (Los Angeles : Aero PUblishers, 1960), by Albert Deyarmond (page images at HathiTrust)
• Report of the Committee on the mechanical testing of timber ... (London, H. M. Stationery off. [printed by Harrison and sons, ltd.], 1934), by Great Britain. Dept. of scientific and industrial research. Committee on mechanical testing of timber (page images at HathiTrust)
• New departure engineering data : analysis of stresses and deflections. (Bristol, Conn. : New departure, division General motors corp., c1946), by General motors sales corporation. New departure division (page images at HathiTrust)
• Airplane stress analysis; an introductory treatise, by Alexa nder Klemin, with the collaboration of George F. Titterton. (New York, Ronald Press, [c1929]), by Alexander Klemin (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice / By J. B. Johnson, C. W. Bryan and F. E. Turneaure. (New York : J. Wiley & sons, 1901 [c1893]), by J. B. Johnson (page images at HathiTrust; US access only)
• Translation key to Kleinlogel's Mehrstieligs Raluneo (Multi-column frames) v. 1 and 2. (New York, F. Ungar Pub. Co., [c1948]), by Fred Blum (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. Being lectures on mathematical physics, by Arthur Gordon Webster. (Leipzig, B. G. Teubner, 1904), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• The theory of strains. : A compendium for the calculation and construction of bridges, roofs and cranes, with the application of trigonometrical notes ... (Baltimore : Schmidt & Trowe, 1871), by John H. Diedrichs (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges, by Isami Hiroi... (New York : D. Van Nostrand company, 1905), by Isamu Hiroi (page images at HathiTrust)
• Plate-girder construction... (New York, D. Van Nostrand co., 1893), by Isami Hiroi (page images at HathiTrust)
• Graphic and analytic statics in their practical application to the treatment of stresses in roofs, solid girders, lattice, bowstring and suspension bridges, braced iron arches and piers, and other frameworks. By Robert Hudson Graham. Containing diagrams and plates to scale, with numerous examples, many taken from existing structures. Specially arranged for class-work in colleges and universities. (London, Crosby Lockwood and co., 1887), by Robert H. Graham (page images at HathiTrust; US access only)
• Stresses in masonry, by Herbert Chatley, with 22 diagrams. (London, C. Griffin & company, limited, 1909), by Herbert Chatley (page images at HathiTrust; US access only)
• Elastic stresses in structures. Translated from Castigliano's "Théorem de l'equibre [!] des systèmes élastiques et ses applications", by Ewart S. Andrews. With 15 folding plates, containing 109 diagrams. (London, Scott, Greenwood, 1919), by Alberto Castigliano (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / By J. B. Johnson, C. W. Bryan and F. E. Turneaure. (New York : Wiley & Sons, c1893), by J. B. Johnson (page images at HathiTrust)
• A course in modern timber engineering; the use of lumber as an engineering material, by Howard J. Hansen. Revised by W. Fleming Scofield. (New Orleans, La., Southern pine association, 1946), by Howard James Hansen (page images at HathiTrust)
• The place of photoelasticity in engineering instruction, / by Max M. Frocht ... assisted by workers furnished by the Works progress administration ... (Pittsburgh, Pa., 1937), by Max Mark Frocht (page images at HathiTrust)
• Elastic and plastic properties of soils and their influence on the continuous support of rigid pavements, (Mariemont, Ohio, Ohio River Division Laboratories, 1954), by Spencer J. Buchanan (page images at HathiTrust)
• Methodology for design and construction of drilled shafts in cohesive soils / by Lawrence D. Johnson ; prepared for Office, Chief of Engineers, U.S. Army. (Washington, D.C. : The Office ; [Springfield, Va. : Available from National Technical Information Service, 1984]), by Lawrence D. Johnson (page images at HathiTrust)
• Deflections and statically indeterminate stresses, (New York, J. Wiley & sons; [etc., etc.], 1911), by Clarence Walter Hudson (page images at HathiTrust)
• Drang und zwang; eine höhere festigkeitslehre für ingenieure, von dr. dr.-ing. Aug. Föppl ... und dr. Ludwig Föppl ... (München Berlin, R. Oldenbourg, 1920), by August Föppl (page images at HathiTrust; US access only)
• Strength and elasticity of structural members, by R.J. Woods ... (London, E. Arnold, 1903), by Richard John Woods (page images at HathiTrust; US access only)
• Berechnung ebener, rechteckiger Platten mittels trigonometrischer Reihen. (München : R. Oldenbourg, 1911), by Karl Hager (page images at HathiTrust; US access only)
• Die Berechnung von Steifrahmen nebst anderen statisch unbestimmten Systemen. Von Ejnar Björnstad ... Mit 127 Figuren im Text, 19 Tabellen und einer graphischen Anlage. (Berlin, Julius Springer, 1909), by Ejnar Bjørnstad (page images at HathiTrust; US access only)
• Résistance des matériaux, par Arthur Morin ... (Paris, L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• The Roorkee manual of applied mechanics; direct and transverse strain, principally by analytical methods. (Roorkee, Thomason Civil Eng. Coll. Press, 1896-1900), by Allan Cunningham (page images at HathiTrust; US access only)
• Die Berechnung statisch unbestimmter Tragwerke nach der Methode des Viermomentensatzes. (Berlin : J. Springer, 1918), by Friedrich Bleich (page images at HathiTrust; US access only)
• Strength and elasticity of structural members / R. J. Woods. (London : E. Arnold, 1908), by Richard John Woods (page images at HathiTrust; US access only)
• Beton und Eisen. (Berlin, W. Ernst & Sohn.) (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute. By William H. Burr ... (New York, J. Wiley & Sons [etc. etc.], 1902), by William H. Burr (page images at HathiTrust)
• The design of steel mill buildings and the calculation of stresses in framed structures. (New York, The Engineering News Pub. Co., 1904), by Milo Smith Ketchum (page images at HathiTrust)
• Die neueren Methoden der Festigkeitslehre und der Statik der Baukonstruktionen. (Leipzig, A. Kröner, 1913), by Heinrich Mueller-Breslau (page images at HathiTrust; US access only)
• Engineering construction ... by William Henry Warren ... (London, Longmans, Green, and Co., 1910-21), by William Henry Warren (page images at HathiTrust; US access only)
• The design of structures: a practical treatise on the building of bridges, roofs, &c., by S. Anglin ... (London, C. Griffin & Co., Ltd., 1919), by S. Anglin (page images at HathiTrust; US access only)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings / by A. Jay Du Bois ... (New York : J. Wiley, 1888, c1883), by Jay Du Bois (page images at HathiTrust)
• The mechanics of engineering, by A. Jay Du Bois. (New York, Wiley, 1902), by A. Jay Du Bois (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. By Mansfield Merriman ... (New York, J. Wiley & sons; [etc., etc.], 1899), by Mansfield Merriman (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs ... / By De Volson Wood. (New York : J. Wiley & son, 1873), by De Volson Wood (page images at HathiTrust)
• An introduction to experimental stress analysis. (New York : Wiley, 1950), by George Hamor Lee (page images at HathiTrust)
• Elementary stress analysis. (New York : Pitman Pub. Corp., 1949), by Philip Ervin Soneson (page images at HathiTrust)
• Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910: Expansion of Pipes, Paper No. 1167, by Ralph C. Taggart (Gutenberg ebook)

More items available under broader and related terms at left.