Joints (Engineering) -- EvaluationSee also what's at your library, or elsewhere.
Broader terms: |
Filed under: Joints (Engineering) -- Evaluation
Items below (if any) are from related and broader terms.
Filed under: Joints (Engineering)- Dowel bearing strength (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1991), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Effect of deformed shanks, prebored lead holes, and grain orientation on the elastic bearing constant for laterally loaded nail joints (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Durability and dimensional stability of COM-PLY joists determined by accelerated aging test (U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station, 1985), by John E. Duff, Gerald A. Koenigshof, and N.C.) Southeastern Forest Experiment Station (Asheville (page images at HathiTrust)
- Experimental assessment of wood trusses with square-end webs (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1996), by Ronald W. Wolfe, Steven M. Cramer, Doug Stahl, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Finger-jointed wood products. (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1981), by Ronald W. Jokerst and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Rotational characteristics of pallet joints (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Lateral load-bearing capacity of nailed joints based on the yield theory : theoretical development (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986), by Petter Aune, Marcia Patton-Mallory, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Predicting the strength of wood-joist floors (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1984), by Dan L. Wheat, R. C. Moody, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Partially continuous floor joists (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985), by Lawrence A. Soltis and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Report of a workshop on requalification of tubular steel joints in offshore structures (U.S. National Institute of Standards and Technology, 1996), by A. W. Taylor, National Institute of Standards and Technology (U.S.), and United States Minerals Management Service (page images at HathiTrust)
- Methods of preparing horizontal construction joints in mass concrete (U.S. Army Engineer Waterways Experiment Station, 1996), by Billy D Neeley, Toy S. Poole, Structures Laboratory (U.S. Army Engineer Waterways Experiment Station), U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
- Strength of soft-soldered joints in copper tubing (U.S. Dept. of Commerce, National Bureau of Standards :, 1940), by Arthur R. Maupin, William H. Swanger, and United States. National Bureau of Standards (page images at HathiTrust)
- Modern practice in the construction and maintenance of rail joints and bonds in electric railways (U.S. Dept. of Commerce, Bureau of Standards :, 1916), by Edgar Raymond Shepard and United States. National Bureau of Standards (page images at HathiTrust)
- Kettenbrückenlinie. (Druck von G. Haase söhne, 1838), by Jakob Philipp Kulik (page images at HathiTrust)
- Stress waves through projectile joints and interfaces (U.S. Army Laboratory Command, Ballistic Research Laboratory, 1989), by James M. Bender and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
- Recommended post-earthquake evaluation and repair criteria for welded steel moment-frame buildings (SAC Joint Venture ;, 2000), by SAC Joint Venture. Guidelines Development Committee and United States Federal Emergency Management Agency (page images at HathiTrust)
- Program to reduce the earthquake hazards of steel moment-frame structures (SAC Joint Venture ;, 2000), by SAC Joint Venture. Guidelines Development Committee and United States Federal Emergency Management Agency (page images at HathiTrust)
- Comparison of structural performance of one- and two-bay rotary joints for truss applications (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program ;, 1991), by J. Douglas Vail, Mark S. Lake, and Langley Research Center (page images at HathiTrust)
- Structural analysis of three space crane articulated-truss joint concepts (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by K. Chauncey Wu, Thomas R. Sutter, and Langley Research Center (page images at HathiTrust)
- Effect of preforming adherends on static and fatigue strength of bonded composite single-lap joints (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by James Wayne Sawyer and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
- Modeling of joints for the dynamic analysis of truss structures (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1987), by W. Keith Belvin and Langley Research Center (page images at HathiTrust)
- Deployable controllable geometry truss beam (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Marvin D. Rhodes and Martin M. Mikulas (page images at HathiTrust)
- Design, fabrication and test of graphite/polyimide composite joints and attachments : summary (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by J. B. Cushman, S. F. McCleskey, S. H. Ward, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Boeing Aerospace Company. Engineering Technology, and Langley Research Center (page images at HathiTrust)
- Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints : summary (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by J. B. Cushman, S. H. Ward, S. F. McCleskey, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
- Development of assembly and joint concepts for erectable space structures (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), by G. G. Jacquemin, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
- Nonlinear modeling of joint dominated structures (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by J. C. Chapman, Langley Research Center, and Boeing Aerospace Company. Engineering Technology (page images at HathiTrust)
- Evaluation of magnetic pulse forming as a joint fabrication technique for CP-5 fuel elements (Argonne National Laboratory, Reactor Operations Division, 1967), by L. G. Kuncl, J. Kotora, R. B. Hagemann, U.S. Atomic Energy Commission, and Argonne National Laboratory. Reactor Operations Division (page images at HathiTrust)
- Investigation and testing of welded and brazed molybdenum joints, final report (Office of Technical Services, U.S. Dept. of Commerce, 1960), by R. E. Pavlak, U.S. Atomic Energy Commission, and Babcock & Wilcox Company. U.S. Atomic Energy Division (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 3 : progress report of laboratory and field exposure tests. (Waterways Experiment Station, 1963), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 4 : water retentivity and tensile strength of splices (Waterways Experiment Station, 1965), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 5 : water retentivity of labyrinth-shaped waterstops (Waterways Experiment Station, 1971), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 7 : preparation of laboratory test samples from finished waterstops (Waterways Experiment Station, 1970), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 8 : effect of specimen size and low temperature on waterstop test results (Waterways Experiment Station, 1972), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Developments in rigid pavement response modeling (U.S. Army Engineer Waterways Experiment Station, 1996), by Michael I. Hammons, Anastosios M. Ioannides, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
- A technique for joining and sealing dissimilar materials (National Aeronautics and Space Administration; [for sale by the Clearinghouse for Federal Scientific and Technical Information, 1965), by United States. National Aeronautics and Space Administration. Technology Utilization Division (page images at HathiTrust)
- Environmental testing of solderless connectors (Sandia Corporation ;, 1957), by J. A. Barber and Sandia Corporation (page images at HathiTrust)
- Deflections and stresses in concrete pavements of airfields with continuous elastic joints (Harvard University, Graduate School of Engineering, 1949), by M. S. Skarlatos and United States. Army. Corps of Engineers. Ohio River Division Laboratories (page images at HathiTrust; US access only)
- PVC contraction joint forming waterstops : an evaluation of cores from the concrete lining in the Tehama-Colusa Canal - Central Valley Project (U.S. Dept. of the Interior, Bureau of Reclamation, 1972), by Henry Johns and United States Bureau of Reclamation (page images at HathiTrust)
- Uniaxial and biaxial tests on riveted fuselage lap joint specimens (Federal Aviation Administration, Office of Aviation Research ;, 1998), by H. Vlieger, H. H. Ottens, Nationaal Lucht- en Ruimtevaartlaboratorium (Netherlands), and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
- Thermo-mechanical analysis of structural joint study (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962., 1962), by J. W. Lobbett, E. A. Robb, United States. Air Force. Air Research and Development Command, and Wright Air Development Division (page images at HathiTrust)
- Flaw growth in complex structure. Volume 1, Technical discussion (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1977., 1977), by Thomas R. Brussat, M. Creager, S. T. Chiu, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), Del West Engineering, and Lockheed-California Company (page images at HathiTrust)
- Large deflection and stability analysis of two-dimensional truss and frame structures (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by J. S. Przemieniecki, D. M. Purdy, Air Force Flight Dynamics Laboratory (U.S.), and Air Force Institute of Technology (U.S.) (page images at HathiTrust)
- Interactive composite joint design. Part 1, Final technical report (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978., 1978), by M. K. Smith, C. G. Dietz, L. J. Hart-Smith, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), and Douglas Aircraft Company (page images at HathiTrust)
- Interactive composite joint design. Part 3, Programming manual (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978., 1978), by M. K. Smith, C. G. Dietz, L. J. Hart-Smith, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), and Douglas Aircraft Company (page images at HathiTrust)
- Analytical design methods for aircraft structural joints (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by W. F. McCombs, J. L. Perry, J. C. McQueen, Air Force Flight Dynamics Laboratory (U.S.), and LTV Aerospace Corporation (page images at HathiTrust)
- Strength of scarf and lap joints in glass-fabric-base plastic laminates (Forest Products Laboratory, 1950), by Fred Werren, Alan D. Freas, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
- Strength evaluation of socket joints (National Aeronautics and Space Administration, Langley Research Center, 1994), by Larry C. Rash and Langley Research Center (page images at HathiTrust)
Filed under: Joints (Engineering) -- Analysis
Filed under: Joints (Engineering) -- Computer simulation
Filed under: Joints (Engineering) -- CongressesMore items available under broader and related terms at left. |