O-ringsSee also what's at Wikipedia, your library, or elsewhere.
Broader terms:Narrower term: |
Filed under: O-rings- An investigation of leakage of large-diameter O-ring seals on spacecraft air-lock hatches (National Aeronautics and Space Administration ;, 1968), by Otto F. Trout and Langley Research Center (page images at HathiTrust)
- Design data for O-rings and similar elastic seals (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by Frank W. Tipton, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Boeing Airplane Company (page images at HathiTrust)
Filed under: O-rings -- Installation -- Handbooks, manuals, etc.
Items below (if any) are from related and broader terms.
Filed under: Sealing (Technology) -- Equipment and supplies- NASA TN D-6693 (National Aeronautics and Space Administration :, 1972), by C. W. Bright, B. J. Lockhart, John F. Kennedy Space Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
- Development and performance of the prototype seal for the power recovery turbine (Goodyear Atomic Corporation ;, 1961), by W. M. Heher, Goodyear Atomic Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust; US access only)
- Control rod gas seals (United States Atomic Energy Commission, Technical Information Service ;, 1952), by W. A. Heywood, C. J. Hibbert, Knolls Atomic Power Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
- Control rod gas seals (Knolls Atomic Power Laboratory, General Electric Company, 1955), by W. A. Heywood, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
Filed under: Gaskets- United States government master specification for rubber packings and gaskets (molded, sheet, and strip). : Federal specifications board specification no. 111a. (Govt. Print. Off., 1925), by United States. Bureau of Standards and no. 111a United States. Federal specifications board. Standard specification (page images at HathiTrust)
- United States government master specification for gaskets, metallic-encased. Federal specifications board, specification no. 485 ... (Govt. print. off., 1927), by United States. Bureau of Standards and no. 485 United States. Federal specifications board. Standard specification (page images at HathiTrust)
- Adhesives, sealants, and gaskets; a survey (Technology Utilization Division, Office of Technology Utilization, National Aeronautics and Space Administration; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1967), by R. B. Perkins and S. N. Glarum (page images at HathiTrust; US access only)
- Gamma radiation damage studies of organic protective coatings and gaskets (Oak Ridge National Laboratory, 1956), by J. C. Bresee, J. S. Watson, C. D. Watson, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
- The use of indium in high-vacuum equipment (Lawrence Radiation Laboratory, 1955), by F. L. Reynolds, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
- NASA TN D-6693 (National Aeronautics and Space Administration :, 1972), by C. W. Bright, B. J. Lockhart, John F. Kennedy Space Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
- "Grooveless flange gaskets" and their installation (U.S. Atomic Energy Commission, Technical Information Branch, 1949), by Alan J. Samuel, University of California Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
- Preparation and testing of a titanium-lined pipe section for standard ring-joint gaskets (Union Carbide Nuclear Company, Oak Ridge Gaseous Diffusion Plant, 1957), by D. B. Woodbridge, R. G. Trehearne, R. C. Kinser, V. M. Hovis, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge Gaseous Diffusion Plant (page images at HathiTrust)
- Gasket failures in plutonium reduction furnaces MT-27-64 (Denver, Colorado : Dow Chemical Company, Rocky Flats Plant ; Washington, D.C : Office of Technical Services, Department of Commerce, 1964., 1964), by William V. Conner, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)
- Ordnance materials handbook : gasket materials (nonmetallic). (Ordnance Corps, 1956), by United States. Army. Ordnance Corps (page images at HathiTrust)
Filed under: Piston ringsFiled under: Rings, Steel- Stresses in rings (E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1957), by John W. Walker, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
- Stresses in rings. Part II (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1958), by J. Walter Joseph, Savannah River Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Filed under: Sealing compounds- Improved sealants for infiltration control: the development and demonstration of materials to reduce or eliminate water infiltration into sewerage (Federal Water Pollution Control Administration; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1969), by Western Company and United States. Federal Water Pollution Control Administration (page images at HathiTrust)
- Rehabilitation of prestressed concrete bridge components by non-electrical (conventional) methods (Federal Highway Administration ;, 1999), by D. Whiting, Construction Technology Laboratories (Portland Cement Association), and United States. Federal Highway Administration (page images at HathiTrust)
- Waterborne coatings for marine applications. (1981) (page images at HathiTrust; US access only)
- Tank sealing with coating materials. (1983) (page images at HathiTrust; US access only)
- Evaluation of rust compatible primers for marine applications. (1984) (page images at HathiTrust; US access only)
- Cathodic protection/partial coatings versus complete coating in ballast tanks - a project update. (1985) (page images at HathiTrust; US access only)
- The effect of edge preparation on coating life - phase two. (1985) (page images at HathiTrust; US access only)
- Magnesium oxysulfate cement sealant in coal mines (U.S. Dept. of the Interior, Bureau of Mines, 1976), by Jack E. Fraley and Robert E. Simpson (page images at HathiTrust)
- Dry-process-sprayed coal mine sealants, a progress report (Dept. of the Interior, Bureau of Mines, 1977), by J. E. Fraley and D. J. Cox (page images at HathiTrust)
- Dry-process-sprayed coal mine sealants, an updated progress report (Dept. of the Interior, Bureau of Mines, 1978), by J. E. Fraley (page images at HathiTrust)
- Adhesives, sealants, and gaskets; a survey (Technology Utilization Division, Office of Technology Utilization, National Aeronautics and Space Administration; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1967), by R. B. Perkins and S. N. Glarum (page images at HathiTrust; US access only)
- Polymeric sealant used to stop shale degradation in coal mines (U.S. Dept. of the Interior, Bureau of Mines ;, 1977), by John C. Franklin, United States Bureau of Mines, and United States. Bureau of Mines. Coal Mine Health and Safety Program (page images at HathiTrust)
- Further studies of epoxy bonding compounds. Physical research project no. 13 (Bureau of Physical Research, 1963), by Haaren A. Miklofsky and Rensselaer Polytechnic Institute (page images at HathiTrust)
- Plastic calking materials (U.S. Dept. of Commerce, National Bureau of Standards :, 1940), by D. W. Kessler, W. H. Sligh, Arthur Hockman, K. A. Milliken, J. J. Tregoning, and United States. National Bureau of Standards (page images at HathiTrust)
- Stone consolidating materials : a status report (Dept. of Commerce, National Bureau of Standards :, 1980), by James R. Clifton, United States. National Bureau of Standards, and Center for Building Technology (page images at HathiTrust)
- State-of-the-art survey of flexible pavement crack sealing procedures in the United States (U.S. Army Cold Regions Research and Engineering Laboratory, 1992), by Robert A. Eaton, Jane Ashcraft, and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
- An evaluation of tailings ponds sealants (National Environmental Research Center, Office of Research and Development, U.S. Environmental Protection Agency; for sale by the Supt. of Docs., U.S. Govt. Print. Off., Washington, 1974), by Don A Clark, James E Moyer, Or.) National Environmental Research Center (Corvallis, and United States. Environmental Protection Agency. Office of Research and Development (page images at HathiTrust; US access only)
- In the matter of certain anaerobic impregnating compositions and components therefor : investigation no. 337-TA-71. (U.S. International Trade Commission, 1980), by United States International Trade Commission (page images at HathiTrust)
- Friction and wear of several compressor gas-path seal materials (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Robert C. Bill, Donald W. Wisander, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
- Achievement of a low-outgassing white paint system for spacecraft thermal control (National Aeronautics and Space Administration ;, 1972), by Benjamin Seidenberg, Carroll H. Clatterbuck, John J. Park, and Goddard Space Flight Center (page images at HathiTrust)
- Criteria for use of seal coats on airport pavements (Federal Aviation Administration, Research and Development Service ;, 1992), by Chhote L. Saraf, V. R. Kumar, Kamran Majidzadeh, Resource International, and United States. Federal Aviation Administration. Research and Development Service (page images at HathiTrust)
- Superfluid helium leak sealant study (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by John W. Vorreiter, Ames Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
- Facilities technology application tests, fuel-resistant pavement sealers (U.S. Army Engineer Waterways Experiment Station ;, 1986), by James E. Shoenberger, Elton R. Brown, United States Army Corps of Engineers, and U.S. Army Engineer Waterways Experiment Station (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 3 : progress report of laboratory and field exposure tests. (Waterways Experiment Station, 1963), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 4 : water retentivity and tensile strength of splices (Waterways Experiment Station, 1965), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 5 : water retentivity of labyrinth-shaped waterstops (Waterways Experiment Station, 1971), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 7 : preparation of laboratory test samples from finished waterstops (Waterways Experiment Station, 1970), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Investigation of nonmetallic waterstops : report 8 : effect of specimen size and low temperature on waterstop test results (Waterways Experiment Station, 1972), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
- Improved materials and processes for sealing and resealing joints in Portland cement concrete pavements : laboratory study (U.S. Army Engineer Waterways Experiment Station ;, 1993), by Larry N. Lynch, James Chehovits, D. W. White, U.S. Army Engineer Waterways Experiment Station, United States Army Corps of Engineers, and Construction Productivity Advancement Research Program (page images at HathiTrust)
- Improved materials and processes for sealing and resealing joints in Portland cement concrete pavements : field evaluation (U.S. Army Engineer Waterways Experiment Station, 1993), by Larry N. Lynch, James Chehovits, D. W. White, Construction Productivity Advancement Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
- Study of air permeability of concrete paints and sealants for reactor housing installations : preliminary report (Atomics International, 1960), by L. Baurmash, C. T. Nelson, R. H. Seefred, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
- An investigation to determine the effectiveness of a chemical additive for reducing seepage in the South Canal : a summary (Arizona State University, School of Engineering, 1961), by Paul F. Ruff and Arizona State University. School of Engineering (page images at HathiTrust; US access only)
- Field tests of sodium carbonate as a sealant to reduce seepage losses from canals (U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, 1965), by Mansil W. Scrivner (page images at HathiTrust; US access only)
- Lower cost canal lining program (U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, 1963), by F. H. Geier and United States. Bureau of Reclamation. Office of Chief Engineer (page images at HathiTrust)
- Evaluation of cores containing preformed polysulfide rubber strips machine extruded polysulfide rubber sealant, and polyvinyl chloride plastic contraction joint forming waterstop (U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, 1970), by Henry Johns and United States. Bureau of Reclamation. Office of Chief Engineer (page images at HathiTrust)
- Additives in bituminous materials and fuel-resistant sealers (Federal Aviation Administration Technical Center ;, 1994), by Gary L. Anderton, Laurand H. Lewandowski, Geotechnical Laboratory (U.S.), and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)
- Joint sealants for airport pavements : phase I, laboratory and field investigations (Federal Aviation Administration, Advanced System Design Service ;, 1988), by C. M. Inaba, T. Novinson, M. C. Hironaka, Calif.) Naval Civil Engineering Laboratory (Port Hueneme, and United States. Federal Aviation Administration. Advanced System Design Service (page images at HathiTrust)
- Over the rough spots (Philadelphia, Pa. : Stonhard Company, 1935., 1935), by Stonhard Company (page images at HathiTrust; US access only)
- Feasibility of plastic foam plugs for sealing leaking chemical containers (Washington, D.C. : For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1973., 1973), by R. C. Mitchell, J. V. Lecce, C. L. Hamermesh, and United States. Environmental Protection Agency. Office of Research and Monitoring (page images at HathiTrust)
More items available under broader and related terms at left. |