The Online Books Page

Online Books by

Erwin V. Zaretsky

Books from the extended shelves:

• Zaretsky, Erwin V.: Analysis of dynamic capacity of low-contact-ratio spur gears using Lundberg-Palmgren theory (National Aeronautics and Space Administration ;, 1975), also by John J. Coy, Dennis P. Townsend, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Apparatus for studying ball spinning friction (National Aeronautics and Space Administration ;, 1965), also by Steven T. Miller, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Bearing life and failure distribution as affected by actual component differential hardness (National Aeronautics and Space Administration ;, 1965), also by Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Comparison of conventional and microasperity elastohydrodynamic lubrication of a ball spinning in a nonconforming groove (National Aeronautics and Space Administration, 1972), also by Charles W. Allen and Dennis P. Townsend (page images at HathiTrust)
• Zaretsky, Erwin V.: Comparison of pitting fatigue life of ausforged and standard forged AISI M-50 and AISI 9310 spur gears (National Aeronautics and Space Administration ;, 1975), also by Dennis P. Townsend, Eric N. Bamberger, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Comparisons of modified VASCO X-2 and AISI 9310 gear steels (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), also by Dennis P. Townsend, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Correlation of elastohydrodynamic film thickness measurements for fluorocarbon, type II ester, and polyphenyl ether lubricants (National Aeronautics and Space Administration ;, 1974), also by Stuart H. Loewenthal, Richard J. Parker, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of carbide size, area, and density on rolling-element fatigue (National Aeronautics and Space Administration ;, 1972), also by James L. Chevalier, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of component differential hardnesses on residual stress and rolling-contact fatigue (National Aeronautics and Space Administration :, 1965), also by United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of contact angle on rolling-element fatigue life with a fluorinated ether lubricant at a cryogenic temperature of 170 K (305 ̊R) (National Aeronautics and Space Administration ;, 1971), also by Marshall W. Dietrich, Dennis P. Townsend, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of five lubricants on life of AISI 9310 spur gears (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), also by Dennis P. Townsend and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of hardness and other mechanical properties on rolling-contact fatigue life of four high-temperature bearing steels (National Aeronautics and Space Administration, 1960), also by Thomas L. Carter, William J. Anderson, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of lubricant extreme-pressure additives on rolling-element fatigue life (National Aeronautics and Space Administration ;, 1973), also by Richard J. Parker and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of nine lubricants on rolling-contact fatigue life (National Aeronautics and Space Administration :, 1962), also by Richard J. Parker, William J. Anderson, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of oxygen concentration on the performance of synthetic paraffinic oils in short term bearing tests from 400 ̊to 500 ̊F (National Aeronautics and Space Administration ;, 1969), also by Richard J. Parker, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of residual stresses induced by prestressing on rolling-element fatigue life (National Aeronautics and Space Administration ;, 1972), also by Richard J. Parker and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of shot peening on surface fatigue life of carburized and hardened AISI 9310 spur gears (National Aeronautics and Space Administration, Scientific and Technical Branch ;, 1982), also by Dennis P. Townsend and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of speed and load on ultra-high-speed ball bearings (National Aeronautics and Space Administration ;, 1975), also by Eric N. Bamberger, Hans R. Signer, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of speed and press fit on fatigue life of roller-bearing inner-race contact (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), also by Harold H. Coe and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of tip relief on endurance characteristics of super-nitralloy and AISI M-50 spur gears (National Aeronautics and Space Administration ;, 1974), also by Dennis P. Townsend and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Effect of viscosity on rolling-element fatigue life at cryogenic temperature with fluorinated ether lubricants (National Aeronautics and Space Administration ;, 1975), also by Marshall W. Dietrich (page images at HathiTrust)
• Zaretsky, Erwin V.: Effects of antiwear and extreme-pressure additives in a synthetic paraffinic lubricant on ball spinning torque (National Aeronautics and Space Administration, 1970), also by Dennis P. Townsend and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Elastohydrodynamic analysis using a power law pressure-viscosity relation (National Aeronautics and Space Administration ;, 1973), also by Stuart H. Loewenthal, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Elastohydrodynamic film thickness formula based on X-ray measurements with a synthetic paraffinic oil (National Aeronautics and Space Administration ;, 1973), also by Stuart H. Loewenthal, Richard J. Parker, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Electron and light microscopy techniques suitable for studying fatigue damage in a crystallized glass ceramic (National Aeronautics and Space Administration :, 1961), also by Shelley Harrell and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: Evaluation of CBS 600 carburized steel as a gear material (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), also by Dennis P. Townsend, Richard J. Parker, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Zaretsky, Erwin V.: Evaluation of high-temperature bearing cage materials (National Aeronautics and Space Administration ;, 1967), also by William J. Anderson and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Fatigue life analysis for traction drives with application to a toroidal type geometry (National Aeronautics and Space Administration ;, 1976), also by John J. Coy, Stuart H. Loewenthal, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: Fatigue lives at 600 ̊F of 120-millimeter-bore ball bearings of AISI M-50, AISI M-1, and WB-49 steels (National Aeronautics and Space Administration ;, 1971), also by Eric N. Bamberger and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Friction losses in a lubricated thrust-loaded cageless angular-contact bearing (National Aeronautics and Space Administration ;, 1973), also by Dennis P. Townsend, Charles W. Allen, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Hot hardness characteristics of ausformed AISI M-50, Matrix II, WD-65, modified AISI 440-C, and Super Nitralloy (National Aeronautics and Space Administration ;, 1973), also by James L. Chevalier, Marshall W. Dietrich, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Life analysis of helical gear sets using Lundberg-Palmgren theory (National Aeronautics and Space Administration ;, 1975), also by John J. Coy, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Life analysis of restored and refurbished bearings (National Aeronautics and Space Administration ;, 1977), also by John J. Coy, Glenn R. Cowgill, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: NASA TN D-4456 (National Aeronautics and Space Administration ;, 1968), also by David W. Reichard, Richard J. Parker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: NASA TN D-4669 (National Aeronautics and Space Administration ;, 1968), also by Marshall W. Dietrich, Richard J. Parker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: NASA TN D-5262 (National Aeronautics and Space Administration ;, 1969), also by Richard J. Parker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: NASA TN D-6009 (National Aeronautics and Space Administration :, 1970), also by Charles W. Allen, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: NASA TN D-6745 (National Aeronautics and Space Administration :, 1972), also by Richard J. Parker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: New generalized rheological model for lubrication of a ball spinning in a nonconforming groove (National Aeronautics and Space Administration ;, 1973), also by Charles W. Allen, Dennis P. Townsend, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Operating characteristics of 120-millimeter-bore ball bearings at 3x10⁶ DN (National Aeronautics and Space Administration ;, 1974), also by Hans R. Signer and Eric N. Bamberger (page images at HathiTrust)
• Zaretsky, Erwin V.: Pitting fatigue characteristics of AISI M-50 and Super Nitralloy spur gears (National Aeronautics and Space Administration ;, 1973), also by Dennis P. Townsend, James L. Chevalier, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Predicted and experimental performance of jet-lubricated 120-millimeter-bore ball bearings operating to 2.5 million DN (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), also by Harold H. Coe and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Zaretsky, Erwin V.: Reduced-pressure environment effects on rolling-element fatigue life with super-refined mineral oil lubricant (National Aeronautics and Space Administration ;, 1968), also by David W. Reichard, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-contact fatigue life of a crystallized glass ceramic (National Aeronautics and Space Administration, 1960), also by Thomas L. Carter (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-contact lubrication studies with polyphenyl ethers at reduced pressures (National Aeronautics and Space Administration ;, 1965), also by Richard J. Parker, William J. Anderson, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element bearing life from 400 ̊to 600 ̊F (National Aeronautics and Space Administration ;, 1969), also by William J. Anderson, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element fatigue life of AISI M-50 and 18-4-1 balls (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), also by Richard J. Parker and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element fatigue life of ausformed M-50 steel balls (National Aeronautics and Space Administration ;, 1968), also by Richard J. Parker, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element fatigue life of silicon nitride balls (National Aeronautics and Space Administration ;, 1974), also by Richard J. Parker and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element fatigue lives of AISI T-1, AISI M-42, AISI 52100, and Halmo at 150 ̊F (National Aeronautics and Space Administration ;, 1971), also by Richard J. Parker, Marshall W. Dietrich, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element fatigue lives of four M-series steels and AISI 52100 at 150 ̊F (National Aeronautics and Space Administration ;, 1971), also by Richard J. Parker, Marshall W. Dietrich, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Rolling-element lubrication with fluorinated polyether at cryogenic temperatures (160 ̊to 410 ̊R) (National Aeronautics and Space Administration, 1969), also by Marshall W. Dietrich, Dennis P. Townsend, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Zaretsky, Erwin V.: Short-term hot-hardness characteristics of five case hardened steels (National Aeronautics and Space Administration ;, 1975), also by Neil E. Anderson, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Short-term hot hardness characteristics of rolling-element steels (National Aeronautics and Space Administration ;, 1972), also by James L. Chevalier, Marshall W. Dietrich, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Speed effects on ball spinning torque (National Aeronautics and Space Administration ;, 1969), also by Dennis P. Townsend, Marshall W. Dietrich, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Zaretsky, Erwin V.: Surface failure of titanium carbide cermet and silicon carbide balls in rolling contact at temperatures to 2000 ̊F (National Aeronautics and Space Administration :, 1965), also by Richard J. Parker, Salvatore J. Grisaffe, and Lewis Research Center (page images at HathiTrust)

See also what's at your library, or elsewhere.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.