The Online Books Page

Die-casting

See also what's at Wikipedia, your library, or elsewhere.

• Dies (Metal-working)
• Founding

• Die-casting -- Congresses

• Die Casting (New York et al.: McGraw-Hill Book. Co., 1951), by H. H. Doehler (page images at HathiTrust)
• Condensed Practical Aids for the Experienced Die Engineer, Die Designer, and Die Maker (Chicago: "Die Techniques", c1949), by James E. Antonidis (page images at HathiTrust)
• High-Pressure Die Casting: A Design Guide for Engineers (Vernon, CA: H. L. (Red) Harvill Mfg. Co., 1945), by H. L. Harvill and Paul Roe Jordan (page images at HathiTrust)
• Die design manual (C. R. Cory, 1941), by Charles Rusell Cory (page images at HathiTrust)
• Design of die castings. (American Foundrymen's Society, 1957), by Gustav Lieby (page images at HathiTrust)
• Die casting for engineers. (The New Jersey zinc company, 1942), by New Jersey Zinc Company (page images at HathiTrust)
• The diecasting process. (Macmillan, 1956), by Hiram Kenneth Barton (page images at HathiTrust)
• Ceramic mold inserts for use in ferrous diecasting (U.S. Dept. of the Interior, Bureau of Mines, 1981), by E. G. Davis and G. V. Sullivan (page images at HathiTrust)
• Materials substitution study: general methodology and review of U.S. zinc die-casting markets (U.S. Bureau of Mines; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1971), by Norman S. Petersen, R. Charles Vars, and Fred V. Carrillo (page images at HathiTrust)
• Der Spritzguss : Handbuch zur Herstellung von Fertigguss in Spritz-, Press-, Vakuum- und Schleuderguss (M. Krayn, 1919), by Alfred Uhlmann (page images at HathiTrust)
• Die casting of compressor blades (Doehler-Jarvis Division, National Lead Company, Research and Engineering Dept., 1962), by G. F. Hodgson, National Lead Company. Doehler-Jarvis Division, Goodyear Atomic Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A visit with "500" die cast plants; a handbook of modern and futuristic practice in the die casting industry (American Charcoal Co., 1959), by Ed. A. Day and W. C. Kennedy (page images at HathiTrust)
• Aircraft fabrication : cast and molded dies. (Scranton, Pa., 1943), by International Textbook Company (page images at HathiTrust)

• Rheocasting : proceedings of the Work Shop on Rheocasting held at Army Materials and Mechanics Research Center on 3-4 February 1977 (MCIC, 1978), by Mass.) Workshop on Rheocasting (1977 : Watertown, Frank S. Hodi, Robert D. French, Battelle Memorial Institute. Metals and Ceramics Information Center, and Army Materials and Mechanics Research Center (U.S.) (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Die Casting (New York et al.: McGraw-Hill Book. Co., 1951), by H. H. Doehler (page images at HathiTrust)
• Condensed Practical Aids for the Experienced Die Engineer, Die Designer, and Die Maker (Chicago: "Die Techniques", c1949), by James E. Antonidis (page images at HathiTrust)
• High-Pressure Die Casting: A Design Guide for Engineers (Vernon, CA: H. L. (Red) Harvill Mfg. Co., 1945), by H. L. Harvill and Paul Roe Jordan (page images at HathiTrust)
• Die design fundamentals; a step-by-step introduction to the design of stamping dies including material, punches, die sets, stops, strippers, gages, pilots and presses. (Industrial Press, 1962), by J. R. Paquin (page images at HathiTrust)
• Press-working of metals. A treatise upon the principles and practice of shaping metals in dies by the action of presses together with a description of the construction of such implements in their various forms, and of the materials worked in them. (J. Wiley & Sons; [etc., etc.], 1896), by Oberlin Smith (page images at HathiTrust)
• Die castings; their design, composition, application, specification, testing and finishing (J. Wiley & sons, inc.;, 1934), by Herbert Chase (page images at HathiTrust)
• Creating an industry. (Doehler die-casting co., 1916), by Doehler die-casting co (page images at HathiTrust)
• Tooling for metal powder parts; a practical treatment on modern practice in the process planning, tool design, equipment, and operations involved in producing structural parts from metal powders (McGraw-Hill, 1958), by American Society of Tool and Manufacturing Engineers and George H. De Groat (page images at HathiTrust)
• Die design (McGraw-Hill Book Co., 1937), by E. G. Marshall (page images at HathiTrust)
• Manual of instruction for die design. A. A. Vezzani. (National Education Committee, American Society of Tool Engineers, 1959), by A. A. Vezzani and Society of Manufacturing Engineers (page images at HathiTrust)
• Pressworking of metals; a reference book illustrating and describing the uses of metalworking presses and many types of press tool designs. (McGraw-Hill, 1950), by C. W. Hinman (page images at HathiTrust)
• Practical considerations in die casting design. (New York, 1948), by New Jersey Zinc Company (page images at HathiTrust)
• Practice in machining zinc alloy die castings. (The New Jersey zinc company, 1945), by New Jersey Zinc Company (page images at HathiTrust)
• Die-casting practice (McGraw-Hill Book Co., Inc., 1930), by Marc Stern (page images at HathiTrust)
• Punches and dies; layout, construction and use. (McGraw-Hill, 1950), by Frank A. Stanley (page images at HathiTrust)
• Practical die-making; a collection from the latest information on dies and die-making (McGraw-Hill Book Company, inc., 1916), by Fred H. Colvin (page images at HathiTrust)
• Punches and dies; layout, construction and use, including Wartime data supplement. (McGraw-Hill book Co., 1943), by Frank A. Stanley (page images at HathiTrust)
• Punches and dies : layout, construction and use (McGraw-Hill, 1919), by Frank A. Stanley (page images at HathiTrust)
• Punches and dies, layout, construction and use (McGraw-Hill, 1936), by Frank A. Stanley (page images at HathiTrust)
• Die-casting; a treatise on the development of die-casting machines, the commercial application of the process, and the alloys used for die-casting. (The Industrial press; [etc., etc.], 1921), by Chester L. Lucas and Edmund Francis Lake (page images at HathiTrust)
• Press tools; the manufacture and use of moulds, dies, and tools for engineering production, with a section on computations; a practical guide for tool makers, die sinkers, tool setters, press operatives, charge hands, foremen and works managers concerned with the production of pressings and stampings (Chemical Pub. Co., 1943), by Edward Molloy (page images at HathiTrust)
• Drop forging, die sinking and machine forming of steel; modern shop practice, processes, methods, machines, tools and details... (The Norman W. Henley publishing co., 1911), by Joseph Vincent Woodworth (page images at HathiTrust)
• Plastic working of metals and power-press operations. (J. Wiley & Sons; London, Chapman & Hall Ltd., 1932), by Edward Villeroy Crane (page images at HathiTrust)
• Plastic working of metals and power-press operations. (Wiley, 1939), by Edward Villeroy Crane (page images at HathiTrust)
• Tool engineering; punches, dies and gages (McGraw-Hill, 1925), by Albert Atkins Dowd and Frank W. Curtis (page images at HathiTrust)
• Dies and die making. (Journal of commerce co.], 1897), by James Lewis Lucas (page images at HathiTrust)
• Diemaking and die design; a treatise on the design and practical application of different classes of dies for blanking, bending, forming and drawing sheet-metal parts, including modern diemaking practice and funamental principles of die construction (The Industrial press; [etc., etc., 1915), by Franklin Day Jones (page images at HathiTrust)
• Grinding; bench and vise work; gear cutting; erecting; toolmaking. (International Textbook Co., 1903), by International Textbook Company and International Correspondence Schools (page images at HathiTrust)
• Gauges, jigs, dies, tempering, heat treatment, blacksmithing and forging (International Textbook Co., 1915), by International Correspondence Schools (page images at HathiTrust)
• Ceramic mold inserts for use in ferrous diecasting (U.S. Dept. of the Interior, Bureau of Mines, 1981), by E. G. Davis and G. V. Sullivan (page images at HathiTrust)
• Martempering of K-46 tool and die steel (Atomic Energy Commission, 1946), by G. L. Kehl, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• United States Navy drop forging book : covering drop forgings under all bureaus for which dies are on hand at navy yards : issue of 1919. (Dept. of the Navy, Bureau of Construction and Repair :, 1919), by United States. Navy Department. Bureau of Construction and Repair (page images at HathiTrust)
• Press-working of metals. (Wiley, 1899), by Oberlin Smith (page images at HathiTrust)
• Die Formschneidekunst; oder, Die Herstellung von Druckformen oder Druckmodeln ... (B.F. Voigt, 1852), by Chr. Heinr. Schmidt (page images at HathiTrust)
• Nouveau manuel complet du mouleur en médailles; ou, l'Art de les mouler en platre, en soufre, en cire, à la mie de pain, à la gélatine (Roret, 1843), by F. B. Robert (page images at HathiTrust)
• Die design and construction; lanking, piercing, compound, progressive, trimming, flanging, forming, and cam dies. (Royalle Pub. Co., 1961), by American Society of Tool and Manufacturing Engineers (page images at HathiTrust)
• Forming press dies. (Dreis & Krump Mfg. Co., 1945), by Dreis & Krump Mfg. Co (page images at HathiTrust)
• The little handbook; a buyer's guide for stampings and tank heads, with certain useful mathematical tables and formulae. ([The Commercial Shearing & Stamping Co., 1950), by Commercial Shearing & Stamping Co (page images at HathiTrust)
• Hand-book on die-castings, containing useful information for manufacturers and engineers concerning metals, design, processes, methods of finishing, fabricating, etc., with tables (Precision castings co., inc., 1919), by Edgar Norman Dollin and Syracuse Precision castings company (page images at HathiTrust)
• Die casting; dies--machines--methods (The Industrial press, 1913), by Chester L. Lucas (page images at HathiTrust)
• Forging operations ... (International textbook company, 1916) (page images at HathiTrust)
• Drawing, forming and bending dies. (The Industrial press, 1914) (page images at HathiTrust)
• Findings on electrical steels, punch and die steels, presses and auxiliaries in metal stamping. (ASTME Research Fund], 1961), by American Society of Tool and Manufacturing Engineers. Metal Stamping Project Committee (page images at HathiTrust)
• Metal stamping design; practical and economical design of stamped metal parts. (Prentice-Hall, 1961), by Richard F. Carlson (page images at HathiTrust)
• Press-working of metals. (J. Wiley & sons;, 1901), by Oberlin Smith (page images at HathiTrust)
• Catalogue of the coins, tokens, medals, dies, and seals in the museum of the Royal Mint (Printed for H.M. Stationery Off. by Darling, 1906), by Great Britain. Royal Mint and William John Hocking (page images at HathiTrust)
• Selected advances in tools, dies, jigs, and fixtures technology. (Washington, 1968), by United States. Small Business Administration. TECHNOLOGY UTILIZATION DIVISION (page images at HathiTrust)
• Die-casting machines ... (The Industrial press, 1913), by A. W. Christianson and Edmund Francis Lake (page images at HathiTrust)
• Press-working of metals . (J. Wiley & Sons, 1913), by Oberlin Smith (page images at HathiTrust)
• Press-working of metals. A treatise upon the principles and practice of shaping metals in dies by the action of presses, together with a description of the construction of such implements in their various forms, and of the materials worked in them. (J. Wiley & sons; [etc., etc.], 1908), by Oberlin Smith (page images at HathiTrust)
• Catalogue of E.W. Bliss Co. and the Stiles & Parker Press Co., Brooklyn, N.Y., U.S.A., 1894 (E.W. Bliss Co., 1894), by E.W. Bliss Co and Stiles & Parker Press Co (page images at HathiTrust)
• Punches & dies ... (McGraw-Hill, 1919), by Frank A. Stanley (page images at HathiTrust)
• Die-set dimensions for closed die forging presses (New York, 1951), by Inc. Hydropress and Inc. Loewy Construction Co. (page images at HathiTrust)
• Condensed practical aids for the experienced die engineer, die designer, and die maker ("Die Techniques,", 1954), by James E. Antonidis (page images at HathiTrust)
• Die erzeugnisse der stempelschneidekunst in Augsburg und Ph. H. Müller's nach meiner sammlung beschrieben und die Augsburger stadtmünzen (K.W. Hiersemann, 1910), by A. von Forster and Philipp Heinrich Müller (page images at HathiTrust)
• Military handbook of aircraft extruded shapes and dies. (U. S. Govt. Print. Off., 1959), by United States Department of Defense (page images at HathiTrust)
• Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task II, LSSA project : quarterly report no. 1, December 1977 (Washington, D.C. : U.S. Department of Energy, Solar Energy, 1977., 1977), by M. T. Duffy, H. I. Moss, Glenn Wherry Cullen, S. Berkman, Low-Cost Silicon Solar Array Project (U.S.), United States. Department of Energy. Division of Solar Energy, RCA Laboratories, and Jet Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task II, LSSA project : quarterly report no. 2, March 1978 (Washington, D.C. : U.S. Department of Energy, Solar Energy, 1978., 1978), by M. T. Duffy, Glenn Wherry Cullen, S. Berkman, Low-Cost Silicon Solar Array Project (U.S.), United States. Department of Energy. Division of Solar Energy, RCA Laboratories, and Jet Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task II, LSSA project : quarterly report no. 3, June 1978 (Washington, D.C. : U.S. Department of Energy, Solar Energy, 1978., 1978), by M. T. Duffy, Glenn Wherry Cullen, H. I. Moss, S. Berkman, Low-Cost Silicon Solar Array Project (U.S.), United States. Department of Energy. Division of Solar Energy, RCA Laboratories, and Jet Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task II, LSSA project : final report, December 1979 (Washington, D.C. : U.S. Department of Energy, Solar Energy, 1979., 1979), by M. T. Duffy, H. I. Moss, R. V. D'Aiello, Glenn Wherry Cullen, S. Berkman, Low-Cost Silicon Solar Array Project (U.S.), United States. Department of Energy. Division of Solar Energy, RCA Laboratories, and Jet Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Punch and die sets for two posts, punch press tools (American Society of Mechanical Engineers, 1950), by American Standards Association. Sectional Committee (B5) on Standaridization of Small Tools and Machine Tool Elements and Metal Cutting Tool Institute (page images at HathiTrust)
• A survey of the feasibility of an analytical approach to die design in closed-die forging (Defense Metals Information Center, Battelle Memorial Institute, 1966), by Serope Kalpakjian and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Die design manual. (Pleasant Ridge, Mich., 1951), by Charles Russell Cory (page images at HathiTrust; US access only)
• Die Casting: Dies—Machines—Methods, by Chester L. Lucas (Gutenberg ebook)

More items available under broader and related terms at left.