The Online Books Page

Endoscopes -- Standards

See also what's at your library, or elsewhere.

• Endoscopes
• Medical instruments and apparatus -- Standards
• Standards

• Endoscopes -- Standards -- United States

• Endoscopy procedures at the U.S. Department of Veterans Affairs : what happened, what has changed? : hearing before the Subcommittee on Oversight and Investigations of the Committee on Veterans' Affairs, U.S. House of Representatives, One Hundred Eleventh Congress, first session, June16, 2009. (U.S. G.P.O. :, 2009), by United States. Congress. House. Committee on Veterans' Affairs. Subcommittee on Oversight and Investigations (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Translation of lectures delivered by Aurelio Bianchi ... on the phonendoscope and its practical application ... (G. P. Pilling & son, 1898), by Aurelio Bianchi, M. Anastasiades, Felix Regnault, and Anthony George Baker (page images at HathiTrust)
• Direct laryngoscopy, bronchoscopy, and œsophagoscopy (William Wood, 1912), by Wilhelm von Brünings, W. G. Howarth, and M.D. Rare Book Collection of Rush University Medical Center at the University of Chicago Stanton A. Friedberg (page images at HathiTrust)

• Klinik der Bronchoskopie. (Verlag von Gustav Fischer, 1906), by Hermann Schroetter (page images at HathiTrust; US access only)

• A simple electric female cystoscope (s.n., 1903), by Thomas S. Cullen (page images at HathiTrust; US access only)

• Selected monographs; Czermak on the practical uses of the laryngoscope. Dusch on thrombosis of the cerebral sinuses. Schroeder van der Kolk on atrophy of the brain. Radicke on the application of statistics to medical enquiries. Esmarch on the uses of cold in surgical practice. (The New Sydenham society, 1861), by New Sydenham Society, Friedrich von Esmarch, F. W. G. Radicke, Jacob Lodewijk Koenraad Schroeder van der Kolk, Theodor Dusch, and Johann N. Czermák (page images at HathiTrust)
• Guide to the use of the laryngoscope in general practice. (P. Blakiston, 1881), by Gordon Holmes and M.D. Rare Book Collection of Rush University Medical Center at the University of Chicago Stanton A. Friedberg (page images at HathiTrust)
• The use of the laryngoscope in diseases of the throat : with an essay on hoarseness, loss of voice, and stridulous breathing, in relation to nervo-muscular affections of the larynx (Lindsay & Blakiston, 1869), by Morell Mackenzie, J. Solis Cohen, and M.D. Rare Book Collection of Rush University Medical Center at the University of Chicago Stanton A. Friedberg (page images at HathiTrust)
• Die chronischen Kehlkopfs-Krankheiten : mit specieller Rücksicht auf laryngoskopische Diagnostik und locale Therapie. (Hirschwald, 1866), by Adelbert Tobold and M.D. Rare Book Collection of Rush University Medical Center at the University of Chicago Stanton A. Friedberg (page images at HathiTrust)
• Die Krankheiten des Kehlkopfes, mit Einschluss der Laryngoskopie und der local-therapeutischen Technik für praktische Aerzte und Studirende. (Franz Deuticke, 1893), by Jacob Gottstein and Austria) Verlag Franz Deuticke (Vienna (page images at HathiTrust)
• Du laryngoscope et de son emploi en physiologie et en médecine (J.-B. Baillière et fils; New-York, Baillière brothers; [etc., etc.], 1860), by Johann N. Czermák (page images at HathiTrust)
• Lessons in laryngoscopy and rhinoscopy : including the diagnosis and treatment of diseases of the throat and nose (Lindsay & Blakiston, 1880), by Prosser James (page images at HathiTrust)

• Standards survey. (Rockville, Md., 1977), by United States. Bureau of Medical Devices (page images at HathiTrust)

• Standards survey. (Bureau of Medical Devices, Division of Medical Devices Standards & Research, Food and Drug Administration., in the 20th century), by United States. Bureau of Medical Devices (page images at HathiTrust)
• Medical devices and diagnostic products standards survey. (Food and Drug Administration, Division of Medical Device Standards and Research, in the 20th century), by United States. Bureau of Medical Devices and Diagnostic Products (page images at HathiTrust)

• Medical devices standards activities report (U.S. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, Center for Devices and Radiological Health, 1989), by Center for Devices and Radiological Health (U.S.). Office of Standards and Regulations (page images at HathiTrust)

• Second draft proposed standard for the infant apnea monitor. (Center for Devices and Radiological Health, Food and Drug Administration, 1989), by Center for Devices and Radiological Health (U.S.) (page images at HathiTrust)
• Food and Drug enforcement standards for medical devices : joint hearing before the Subcommittee on Human Resources and Intergovernmental Relations and the Subcommittee on National Economic Growth, Natural Resources, and Regulatory Affairs of the Committee on Government Reform and Oversight, House of Representatives, One Hundred Fourth Congress, first session, September 14, 1995. (U.S. G.P.O. :, 1997), by United States. Congress. House. Committee on Government Reform and Oversight. Subcommittee on Human Resources and Intergovernmental Relations and Natural Resources United States. Congress. House. Committee on Government Reform and Oversight. Subcommittee on National Economic Growth (page images at HathiTrust)
• Medical devices : are current regulations doing enough for patients? : hearing before the Subcommittee on Health of the Committee on Energy and Commerce, House of Representatives, One Hundred Eleventh Congress, first session, June 18, 2009. (U.S. G.P.O. :, 2012), by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Health (page images at HathiTrust)
• Electromagnetic compatibility standard for medical devices : MDS-201-0004 (Dept. of Health, Education, and Welfare, Public Health Service, Food and Drug Administration, Bureau of Medical Devices, 1979), by United States. Bureau of Medical Devices (page images at HathiTrust)

• Guideline for the manufacture of in vitro diagnostic products. (Division of Compliance Programs, Office of Compliance and Surveillance, Center for Devices and Radiological Health, Food and Drug Administration, 1990), by Center for Devices and Radiological Health (U.S.). Division of Compliance Programs (page images at HathiTrust)
• Premarket approval (PMA) manual (U.S. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, Center for Devices and Radiological Health ;, 1993), by Charles Kyper and Center for Devices and Radiological Health (U.S.) (page images at HathiTrust)
• Premarket approval (PMA) manual (U.S. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, Center for Devices and Radiological Health ;, 1986), by Center for Devices and Radiological Health (U.S.). Office of Device Evaluation (page images at HathiTrust)
• In vitro diagnostic devices : guidance for the preparation of 510(k) submissions (U.S. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, Center for Devices and Radiological Health ;, 1987), by Alfred Bracey and Center for Devices and Radiological Health (U.S.) (page images at HathiTrust)

• Clinical thermometers (Washington, D.C. : United States Government Printing Office, 1952., 1952), by United States. National Bureau of Standards (page images at HathiTrust)

• FDA and the reform of the medical device approval process (U.S. G.P.O. :, 2011), by United States Senate Special Committee on Aging (page images at HathiTrust)

• Organizations engaged in preparing standards for dental materials and therapeutic agents with a list of standards (U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1980), by G. C. Paffenbarger, Margaret Malmstedt, and R. W. Rupp (page images at HathiTrust)

• Organizations engaged in preparing standards for dental materials and therapeutic agents with a list of standards (U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1980), by G. C. Paffenbarger, Margaret Malmstedt, and R. W. Rupp (page images at HathiTrust)

• Qualitative assessment of restorations at varying time intervals : a thesis submitted in partial fulfillment ... in restorative dentistry ... (1981), by Kenneth E. Carpenter and University of Michigan. School of Dentistry (page images at HathiTrust; US access only)
• Examiner variability in determining clinical serviceability of amalgam restorations : a thesis submitted in partial fulfillment ... restorative dentistry, operative ... (1978), by Francis J. Robertello and University of Michigan. School of Dentistry (page images at HathiTrust; US access only)

• Status report: National Standard Reference Data System, April 1966. (For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Edward L. Brady (page images at HathiTrust)
• National Highway Safety Program Management and Reporting System. Volume I (1969) (page images at HathiTrust)
• National Highway Safety Program Management and Reporting System. Volume II (1969) (page images at HathiTrust)
• National Highway Safety Program Management and Reporting System. Volume III (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. II - cost estimates. Final report. (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. III - appendices. Final report. (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. IV - MVSPS cost estimator's guide. Final report. (1969) (page images at HathiTrust)
• The organization and program structure of the National Highway Safety Bureau. (1967), by Robert Brenner and 1st annual meeting Federal Highway Administration (page images at HathiTrust)
• Determination of the tradeoffs between safety, weight, and cost of possible improvements to vehicles structure and restraints. Final report. (1974), by G. H. Alexander, R. E. Conrad, and M. R. Neale (page images at HathiTrust)
• Analytical methods and design implications of deterministic ride quality criteria. Final report. (1975), by J. K. Hedrick, R. C. White, and H. Firouztash (page images at HathiTrust)
• Model police traffic services procedures (1975) (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
• Evaluation of benefits to the federal highway program provided by regulation of vehicle noise emissions. (1976), by N. P. Miller, P. C. Fano, T. J. Rosalanko, and H. B. Darcy (page images at HathiTrust)
• A manual of police traffic services, rules (1976) (page images at HathiTrust)
• The contributions of automotive regulation. Preliminary report. (1978) (page images at HathiTrust)
• Automobile fuel economy contractors' coordination meeting - summary report. (1978), by Contractors' Coordination Meeting Automotive Fuel Economy Research and Analysis Program (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Volume II: appendices. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Vehicle anti-theft security system design. Volume II: technical report. Final report. (1978), by John S. Howland (page images at HathiTrust)
• Vehicle anti-theft security system design. Volume I: summary report. Final report. (1978), by John S. Howland (page images at HathiTrust)
• Final assessment of the bumper standard. (1979) (page images at HathiTrust)
• Final assessment of the bumper standard. Executive summary. (1979) (page images at HathiTrust)
• Development of standards and tests for acceptance of traffic signal lenses. Final report. (1979), by David F. King (page images at HathiTrust)
• An evaluation of standard 214. Technical report. (1979), by Charles Jesse Kahane (page images at HathiTrust)
• Evaluation plan for Federal Motor Vehicle Safety Standard 208 occupant crash protection. (1979) (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Task VI additional bumpers, FMVSS 215 - exterior protection. Final report. (1978), by M. R. Harvey, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Study of the effects of applying federal motor vehicle safety standard 201 to light trucks and vans. Modification No. 2. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
• Study of the effects of applying federal motor vehicle safety standards 203 & 204 to light trucks and vans. Modification No. 3. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
• Passenger car/pedestrian impact protection system evaluation. Final report. (1979), by R. McLean, L. A. C. Barbarek, and O. J. Viergutz (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards: Task VIII - FMVSS 301, fuel system integrity - determination of the model year when manufacturers made changes to meet Standard's 1976 requirements. Final report. (1979), by R. F. McLean and G. Lisiecki (page images at HathiTrust)
• Calculations and supporting material for the preliminary analysis of the bumper standard. (1979) (page images at HathiTrust)
• Comments of Houdaille industries on the bumper standard. (1979) (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards - Vol. V. - FMVSS 213. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume I: FMVSS 105. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume II: FMVSS 108. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume III: FMVSS 122. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume IV: FMVSS 202 and 207. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume VI: FMVSS 220, 221 and 222. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards - Task IX: FMVSS 214, side door strength, identification and cost evaluation of design and manufacturing changes. Final report. (1979), by M. R. Harvey and C. B. Eckel (page images at HathiTrust)
• Review of procedures for determining corporate average fuel economy - Volume I: executive summary. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
• Review of procedures for determining corporate average fuel economy - Volume II: technical report. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
• Cost and economic impact of tire reserve load requirements. Final report. (1980), by O. J. Viergutz, S. Marek, C. Kelley, and H. Wakeley (page images at HathiTrust)
• Cost evaluation for three Federal Motor Vehicle Safety Standards - FMVSS 203, 204, and 212. Final report. (1980), by R. F. McLean, C. B. Eckel, and J. A. Lesczhik (page images at HathiTrust)
• Side impact conference. (Government Printing Office, Washington, D.C., 1980), by 31 Jan 1980-1 Feb 1980 Side Impact Conference (page images at HathiTrust)
• An evaluation of Federal Motor Vehicle Safety Standards for passenger car steering assemblies. Standard 203 - impact protection for the driver. Standard 204 - rearward column displacement. (1981), by Charles Jesse Kahane (page images at HathiTrust)
• Emergency medical services communications design manual. Final report. (1980), by C. Davis, Sandra Callahan, and F. Pethel (page images at HathiTrust)
• Implementation analysis for daytime headlamp use. Final report. (1980), by D. M. Teague, L. E. Rohter, Leonard P. Gau, H. G. Wakeley, and O. J. Viergutz (page images at HathiTrust)
• FMVSS no. 208 extension to light trucks, vans, and MPV's - cost/leadtime study. Final report. (1981), by R. Schwarz (page images at HathiTrust)
• Multipiece rims for trucks, buses, and trailers - economic effects caused by further regulation of rims in Standard No. 120. Final report. (1981), by R. W. Gaines (page images at HathiTrust)
• Review and evaluation of automotive fuel conservation technologies. Final summary report. (1981), by S. Marek, L. Rohter, and O. J. Viergutz (page images at HathiTrust)
• Model police traffic services directives (policy, procedures, rules) for police executives. Final report. (1981), by R. H. Sosktowski, W. J. Nash, and R. C. Mayer (page images at HathiTrust)
• Final regulatory analysis of the model year 1982 light truck fuel economy standards. (1980) (page images at HathiTrust)
• An evaluation of head restraints - Federal Motor Vehicle Safety Standard 202. (1982), by Charles Jesse Kahane (page images at HathiTrust)
• Review and evaluation of automotive fuel conservation technologies. Final report. (1981), by H. M. Siegel, R. Schwarz, J. Andon, G. Kollars, T. Gerstenberger, R. Gaines, Ronald Falk, and Stan Renick (page images at HathiTrust)
• Comprehensibility standards for technical manuals. (1978) (page images at HathiTrust)
• Cost evaluation for two Federal Motor Vehicle Safety Standards; FMVSS 113 Hood Latch - Passenger Cars; FMVSS 219 Windshield Zone Intrusion - Passenger Cars. Final report. (1982), by T. N. McVetty, A. J. Cross, and L. W. Parr (page images at HathiTrust)
• Evaluation of Federal Motor Vehicle Safety Standard 301-75, Fuel System Integrity: Passenger Cars. (1983), by G. G. Parsons (page images at HathiTrust)
• An evaluation of side structure improvements in response to Federal Motor Vehicle Safety Standard 214. (1982), by Charles Jesse Kahane (page images at HathiTrust)
• A preliminary evaluation of two braking improvements for passenger cars - dual master cylinders and front disc brakes. (1983), by Charles Jesse Kahane (page images at HathiTrust)
• Consumer cost evaluation of Federal Motor Vehicle Safety Standards - FMVSS 103 and 104. Final report. (1982), by John L. Gilmour (page images at HathiTrust)
• An evaluation of side marker lamps for cars, trucks and buses. (1983), by Charles Jesse Kahane (page images at HathiTrust)
• Feasibility of shipbuilding standards. Executive summary. (1976), by Kevin P. Gildart and James A. Burbank (page images at HathiTrust; US access only)
• Report of Castine Conference: feasibility of shipbuilding standards (1976), by 7-9 June 1976 Feasibility of Shipbuilding Standards Conference (page images at HathiTrust; US access only)
• Final report on a compendium of shipbuilding standards (U.S. Department of Commerce Maritime Administration, 1979), by Corporate-Tech Planning, Bath Iron Works, United States Maritime Administration, and National Shipbuilding Research Program. Task S-20 (page images at HathiTrust)
• Propulsion plant standards feasibility study. Executive summary. (1975) (page images at HathiTrust; US access only)
• Propulsion plant standards feasibility study. Final report. (1975) (page images at HathiTrust; US access only)
• Recommended U.S. shipbuilding standards program long-range plan : final report. (National Shipbuilding Research Program, 1982), by Ishikawajima Jūkōgyō Kabushiki Kaisha, Inc IHI Marine Technology, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Consensus QA/QC acceptance standards, Task S-31 of the Ship Producibility Research Program. (1982) (page images at HathiTrust; US access only)
• Standard structural arrangements - a report of research conducted under MARAD Task S-11 of the Ship Producibility Research Program to determine the value of standard structural arrangements. (1978) (page images at HathiTrust; US access only)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume I. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume II. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Scheduling standards pilot project. Summary report. (1982) (page images at HathiTrust; US access only)
• A manual on planning and production control for shipyard use. (1978) (page images at HathiTrust; US access only)
• Industrial engineering applications in the U.S. shipbuilding industry : May 25, 1982, New Orleans, Louisiana ([Bath Iron Works Corporation?], 1982), by Bath Iron Works, 25 May 1982 Industrial Engineering Application in the U.S. Shipbuilding Industry Symposium, and 25 May 1982 American Institute of Industrial Engineers' Industrial Engineering Conference (page images at HathiTrust; US access only)
• Shipbuilding industry/production engineering workshop. Proceedings. (1978), by 21-24 Feb 1978 Shipbuilding Industrial/Production Engineering Workshop (page images at HathiTrust; US access only)
• Improved planning and production control. (1977) (page images at HathiTrust; US access only)
• Shipyard marking methods. (1980) (page images at HathiTrust; US access only)
• Prefailure evaluation techniques for marine coatings. (1974) (page images at HathiTrust; US access only)
• Surface preparation: a comparative analysis of existing standards - a proposed marine standard. (1983), by L. Jackel (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Executive summary. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Volume 1: report. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Volume 2: appendices. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Quality assurance system. Executive summary. Final report. (1980) (page images at HathiTrust; US access only)
• Japanese technology that could improve U.S. shipbuilding productivity. (1980) (page images at HathiTrust; US access only)
• Mineral slag abrasive survey and specification. (1984) (page images at HathiTrust; US access only)
• Draft U.S. merchant ship bridge design standards - report II. Final report. (1982), by K. L. Marino and R. B. Cooper (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
• Shipbuilding design/production integration workshop. Volume I. Proceedings. (1981), by 18-21 Jan 1981 Shipbuilding Design/Production Integration Workshop (page images at HathiTrust; US access only)
• Determination of volume solids of paints and coatings by accurate dry film thickness measurements. (1981) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume I. (1982) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume II. (1982) (page images at HathiTrust; US access only)
• Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
• Work management manual - electrical installation. Volume II. (1982) (page images at HathiTrust; US access only)
• Work management manual - in-shop blast and paint. (1983) (page images at HathiTrust; US access only)
• Work management manual - material handling for shipyards. (1983) (page images at HathiTrust; US access only)
• Work management manual - hull erection. (1981), by D. Koelling, W. Inman, D. Phillips, and J. Schauske (page images at HathiTrust; US access only)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume I: executive summary. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume III: 1982 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume II: 1982 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume IV: 1983 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume V: 1983 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VI: 1984 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VII: 1984 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• A compendium of shipbuilding standards. Interim report on subtask I: regulatory body and classification body shipbuilding standards. (1979) (page images at HathiTrust; US access only)
• A compendium of shipbuilding standards. Interim report on subtask II: industrial standards in shipbuilding use. (1979) (page images at HathiTrust; US access only)
• A compendium of shipbuilding standards. Interim report on subtask III: foreign shipbuilding standards. (1979) (page images at HathiTrust; US access only)
• FY-82 Labor Standards Program - pipe fabricating and blast and paint shops. (1983) (page images at HathiTrust; US access only)
• Work management manual - pipe fabricating shop. (1981), by D. Fulwiler, D. Kressig, and J. Tong (page images at HathiTrust; US access only)
• Back-up data for temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
• Work management manual - general: temporary staging for ground assembly and aboard ship. (1982) (page images at HathiTrust; US access only)
• Temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
• An evaluation of windshield glazing and installation methods for passenger cars. (1985), by Charles Jesse Kahane (page images at HathiTrust)
• Estimation of weight and consumer price relating to the implementation of FMVSS 105, 108, 202, 205, and 216 in passenger cars and 201, 203 and 205 in light trucks. Final report. (1982), by R. Gladstone, M. R. Harvey, J. Leschik, and R. McLean (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Appendix B - photographs. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume I. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume II. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume III. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Computerized application of standards. Final report on task ES-8-22. (1985) (page images at HathiTrust; US access only)
• Labor standards application program: electrical trade area. Final report. (1985) (page images at HathiTrust; US access only)
• Product oriented safety and health management. (1986) (page images at HathiTrust; US access only)
• Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 108 and 207. Final report. (1986), by Lloyd E. Carlson and P. Leonard (page images at HathiTrust)
• An evaluation of the bumper standard - as modified in 1982. Technical report. (1987), by Warren G. La Heist and F. G. Ephraim (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 105-83. Final report. (1985), by G. J. Adams, Lloyd E. Carlson, and B. W. Firth (page images at HathiTrust)
• Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
• Data development of detail standards for outside machinery operations. (1985) (page images at HathiTrust; US access only)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume I. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume II. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume III. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume IV. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Manual on uniform traffic control devices for streets and highways. (Government Printing Office, Washington, D.C., 1988) (page images at HathiTrust)
• Motor vehicle regulations. Regulatory cost estimates could be improved. (1992) (page images at HathiTrust)
• Study designs for passing sight distance requirements. Final report. (1992), by Warren Edward Hughes, Sarath C. Joshua, and Hugh W. McGee (page images at HathiTrust)
• Motor vehicle fires in traffic crashes and the effects of the fuel system integrity standard. (1990), by G. G. Parsons (page images at HathiTrust)
• Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume I. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
• Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume II. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
• Cost and leadtime estimates for improved pillar padding, automatic slack adjusters, visual brake adjustment indicators and tractor/trailer ABS connections. Final report. (1994) (page images at HathiTrust)
• [Cost per life saved by the FMVSS] (2004), by Charles Jesse Kahane (page images at HathiTrust)
• Development and current status of the standard nuclear instrument module (NIM) system. (sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by Louis Costrell (page images at HathiTrust)
• Standardization of Work Measurement. Volume 2, Clerical and Sales Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 3, Service Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 4, Farming, Fishery, Forestry, and Related Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 5, Processing Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 6, Machine Trades Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 7, Bench Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 8, Structural Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement, Volume 9, Miscellaneous Occupations (Transportation, Packaging, Materials Handling...). (Defense Technical Information Center, 1977), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 10, Universal, (Common to Two or More Occupations). (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Computer program for analysis of imperfection sensitivity of ring stiffened shells of revolution (National Aeronautics and Space Administration ;, 1971), by Gerald A. Cohen, Langley Research Center, and Philco-Ford Corporation (page images at HathiTrust)
• La Convention du mètre et le Bureau international des poids et mesures (Gauthier-Villars, 1902), by Ch.-Ed. Guillaume (page images at HathiTrust; US access only)
• Incremental cost, weight and leadtime impacts of adding improved padding to motor vehicle interiors. Final report. (1994), by K. W. Rutland, B. C. Spinney, J. S. Clements, and C. Westphal (page images at HathiTrust)
• On the interior regularity of weak solutions of the navier-stokes equations ([Washington, D.C.] : Mathematics Division, Air Force Office of Scientific Research, 1961., 1961), by J. Serrin, United States. Air Force. Office of Scientific Research, and University of Minnesota. Institute of Technology (page images at HathiTrust)

More items available under broader and related terms at left.