The Online Books Page

Hose -- Standards

See also what's at your library, or elsewhere.

Broader terms:

Narrower terms:

Filed under: Hose -- Standards

Vinyl chloride plastics garden hose (Washington, D.C. : United States Government Printing Office, 1957., 1957), by United States. National Bureau of Standards (page images at HathiTrust)
TFE-fluorocarbon (polytetrafluoroethylene) resin flexible hose (wire braid reinforced) ([Washington, D.C.] : U.S. Department of Commerce, Office of Technical Services, Commodity Standards Division, [1962], 1962), by United States. National Bureau of Standards and United States. Department of Commerce. Office of Technical Services (page images at HathiTrust)

Filed under: Hose -- Standards -- United States

Vinyl chloride plastics garden hose (Washington, D.C. : United States Government Printing Office, 1957., 1957), by United States. National Bureau of Standards (page images at HathiTrust)
TFE-fluorocarbon (polytetrafluoroethylene) resin flexible hose (wire braid reinforced) ([Washington, D.C.] : U.S. Department of Commerce, Office of Technical Services, Commodity Standards Division, [1962], 1962), by United States. National Bureau of Standards and United States. Department of Commerce. Office of Technical Services (page images at HathiTrust)

Filed under: Fire hose -- Standards

Standard specifications for cotton rubber-lined fire hose. (Govt. Print. Off., 1921), by United States. National Bureau of Standards (page images at HathiTrust)

Items below (if any) are from related and broader terms.

Filed under: Hose

Proposed specifications for fire hose in the city of Rochester and report theron (Rochester Bureau of municipal research, inc., 1917), by Rochester Bureau of Municipal Research (page images at HathiTrust)
United States government master specification for cotton rubber-lined fire hose (couplings and gaskets) (Govt. print. off., 1925), by United States. Bureau of Standards and no. 38b United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for gas hose. Federal specifications board specification no. 40b. (Govt. Print. Off., 1925), by United States. Bureau of Standards and no. 40b United States. Federal specifications board. Standard specification (page images at HathiTrust)
Federal specifications board specification no. 44b (Bureau of Standards, 1925), by United States. Bureau of Standards and United States. Federal specifications board (page images at HathiTrust)
United States government master specification for hose, tender (corrugated) (Govt. print. off., 1926), by United States. Bureau of Standards and no. 46c United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for water and wash deck hose. Federal specifications board specification no. 48b. (Govt. Print. pff., 1925), by United States. Bureau of Standards and no. 48b United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for steam hose. : Federal specifications board specification no. 49b. (Govt. Print. Off., 1925), by United States. National Bureau of Standards and no. 49b United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for water-suction hose (smooth bore). Federal specifications board specification no. 50a. (Govt. Print. Off., 1925), by United States. Bureau of Standards and no. 50a United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for oil suction and discharge hose. Federal specifications board specification no. 63a ... (Govt. Print. Off., 1925), by United States. Bureau of Standards and no. 63c United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for rubber-metal gasoline hose. Federal specifications board specification no. 136a. (Govt. Print. Off., 1925), by United States. Bureau of Standards and no. 136a United States. Federal specifications board. Standard specification (page images at HathiTrust)
United States government master specification for hose, fire, unlined linen. (U. S. Govt. Print. Off., 1927), by United States. National Bureau of Standards (page images at HathiTrust)
Small hose streams for fighting mine fires (U.S. Dept. of the Interior, Bureau of Mines :, 1925), by L. D. Tracy, Rae Wright Hendricks, University of Illinois (Urbana-Champaign campus). Engineering Experiment Station, Illinois State Geological Survey, and United States Bureau of Mines (page images at HathiTrust)
Selection and care of garden hose. (G.P.O., 1927), by United States. Bureau of Standards (page images at HathiTrust)
Specification for oil suction and discharge hose (Govt. Print. Off., 1926), by United States. Bureau of Standards (page images at HathiTrust)
Federal specifications board specification no. 48b (Bureau of Standards., 1925), by United States. Bureau of Standards and United States. Federal specifications board (page images at HathiTrust)
United States government master specification for hose, fire, unlined linen (G.P.O., 1927), by United States. Bureau of Standards (page images at HathiTrust)
Hydraulic experiments with valves, orifices, hose, nozzles, and orifice buckets (University of Illinois, 1918), by University of Illinois (Urbana-Champaign campus). Hydraulic Laboratory, Melvin Lorenius Enger, Virgil R. Fleming, Fred B. Seely, and A. N. Talbot (page images at HathiTrust)
Flexible metal hose and tubing manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
Flexible metal hose and tubing manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
Channon's review. (H. Channon Co., 1915), by H. Channon Company (page images at HathiTrust)

Filed under: Hose -- Catalogs

Channon's review. (H. Channon Co., 1915), by H. Channon Company (page images at HathiTrust)

Filed under: Hose -- Maintenance and repair -- Handbooks, manuals, etc.

Operator's, unit, intermediate, direct support, and intermediate general support maintenance manual with repair parts and special tools list : hoseline outfit, fuel handling, 4-inch diameter (3835-00-892-5157). (Headquarters, Dept. of the Army, 1991), by United States. Department of the Army (page images at HathiTrust)
Operator, organizational, direct support, and general support maintenance manual including repair parts list for repair kit hose assembly, model number SEHARK (NSN 4940-01-080-4213). (Headquarters, Dept. of the Army, 1992), by United States. Department of the Army (page images at HathiTrust)

Filed under: Hose -- Safety measures

Hose safety during high-pressure water-jet cutting (U.S. Dept. of the Interior, Bureau of Mines, 1987), by E.D. Thimons, H.J. Handewith, J.L. Thompson, and Charles D. Taylor (page images at HathiTrust)
Hose safety during high-pressure water-jet cutting (U.S. Dept. of the Interior, Bureau of Mines, 1987), by Charles D. Taylor (page images at HathiTrust)

Filed under: Hose -- Specifications

Federal specifications board specification no. 44b (Bureau of Standards, 1925), by United States. Bureau of Standards and United States. Federal specifications board (page images at HathiTrust)
Federal specifications board specification no. 46b (Bureau of Standards, 1925), by United States. Bureau of Standards and United States. Federal specifications board (page images at HathiTrust)
Federal specifications board specification no. 48b (Bureau of Standards., 1925), by United States. Bureau of Standards and United States. Federal specifications board (page images at HathiTrust)

Filed under: Hose -- Statistics -- Periodicals

Rubber and plastics hose and belting. (U.S. Dept. of Commerce, Bureau of the Census :, 1973), by United States Bureau of the Census (page images at HathiTrust)

Filed under: Hose -- Testing

United States government master specification for hose, pneumatic. Federal specifications board specification, no. 41b. <Rev. March 1, 1926> ... (Govt. print. off., 1926), by United States. Bureau of Standards and no. 41 b United States. Federal specifications board. Standard specification (page images at HathiTrust)

Filed under: Fire hose -- Testing

Experiments upon the discharge of water through small fire hose and nozzles (1911), by Edward Oswald Korsmo and Alonzo Beda Neininger (page images at HathiTrust; US access only)

Filed under: Fire hose

Wildland fire hose guide (Technology & Development Center, 1995), by Lois P. Sicking, Technology & Development Program (U.S.), and Calif.) Technology & Development Center (San Dimas (page images at HathiTrust)
Hose slinger for retrieval of fire hose by helicopter. (United States Dept. of Agriculture, Forest Service, Technology & Development Program, 1989), by United States Forest Service and Technology & Development Program (U.S.) (page images at HathiTrust)
Manufacturers of seamless linen and rubber lined linen hose specially adapted for hydraulic mining, factories, warehouses, hotels, steamships, hand fire engines and general fire protection, where strong, light and serviceable hose is required ; also rubber belting, hose and steam packing, coupling pipes and connections furnished. (s.n., 1883), by Canadian Rubber Company (page images at HathiTrust)
Standpipe and hose systems. (National Board of Fire Underwriters, 1938), by National Board of Fire Underwriters (page images at HathiTrust; US access only)
Care of fire hose : suggestions for the selection, maintenance and use of fire hose. (National Fire Protection Association, 1936), by National Fire Protection Association (page images at HathiTrust; US access only)
Standards for the installation of standpipe and hose systems (National Board of Fire Underwriters, 1949), by National Board of Fire Underwriters and National Fire Protection Association (page images at HathiTrust; US access only)

Filed under: Tubes -- Standards -- United States

Fluorinated ethylene-propylene (FEP) plastic tubing. (U.S. Dept. of Commerce, National Bureau of Standards :, 1971), by United States. National Bureau of Standards (page images at HathiTrust)
Heat-shrinkable fluorocarbon plastic tubing. (U.S. Dept. of Commerce, National Bureau of Standards :, 1971), by United States. National Bureau of Standards (page images at HathiTrust)
Polytetrafluoroethylene (PTFE) plastic tubing. (U.S. Dept. of Commerce, National Bureau of Standards :, 1972), by United States. National Bureau of Standards (page images at HathiTrust)

Filed under: Tubes, Copper -- Standards -- United States

Copper drainage tube (DWV) ([Washington, D.C.] : U.S. Department of Commerce, Business and Defense Services Administration, Office of Technical Services, Commodity Standards Division, [1960], 1960), by United States. National Bureau of Standards and United States. Business and Defense Services Administration (page images at HathiTrust)
Automotive and general service copper tube (Washington, D.C. : United States Department of Commerce, National Bureau of Standards, 1950., 1950), by United States. National Bureau of Standards (page images at HathiTrust)

Filed under: Tubes, Copper -- Standards

Copper drainage tube (DWV) ([Washington, D.C.] : U.S. Department of Commerce, Business and Defense Services Administration, Office of Technical Services, Commodity Standards Division, [1960], 1960), by United States. National Bureau of Standards and United States. Business and Defense Services Administration (page images at HathiTrust)
Automotive and general service copper tube (Washington, D.C. : United States Department of Commerce, National Bureau of Standards, 1950., 1950), by United States. National Bureau of Standards (page images at HathiTrust)

Filed under: Standards

Status report: National Standard Reference Data System, April 1966. (For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Edward L. Brady (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume I (1969) (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume II (1969) (page images at HathiTrust)
National Highway Safety Program Management and Reporting System. Volume III (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. II - cost estimates. Final report. (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. III - appendices. Final report. (1969) (page images at HathiTrust)
Motor vehicle standards cost estimating system. Vol. IV - MVSPS cost estimator's guide. Final report. (1969) (page images at HathiTrust)
The organization and program structure of the National Highway Safety Bureau. (1967), by Robert Brenner and 1st annual meeting Federal Highway Administration (page images at HathiTrust)
Determination of the tradeoffs between safety, weight, and cost of possible improvements to vehicles structure and restraints. Final report. (1974), by G. H. Alexander, R. E. Conrad, and M. R. Neale (page images at HathiTrust)
Analytical methods and design implications of deterministic ride quality criteria. Final report. (1975), by J. K. Hedrick, R. C. White, and H. Firouztash (page images at HathiTrust)
Model police traffic services procedures (1975) (page images at HathiTrust)
Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
Evaluation of benefits to the federal highway program provided by regulation of vehicle noise emissions. (1976), by N. P. Miller, P. C. Fano, T. J. Rosalanko, and H. B. Darcy (page images at HathiTrust)
A manual of police traffic services, rules (1976) (page images at HathiTrust)
The contributions of automotive regulation. Preliminary report. (1978) (page images at HathiTrust)
Automobile fuel economy contractors' coordination meeting - summary report. (1978), by Contractors' Coordination Meeting Automotive Fuel Economy Research and Analysis Program (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Volume II: appendices. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
Vehicle anti-theft security system design. Volume II: technical report. Final report. (1978), by John S. Howland (page images at HathiTrust)
Vehicle anti-theft security system design. Volume I: summary report. Final report. (1978), by John S. Howland (page images at HathiTrust)
Final assessment of the bumper standard. (1979) (page images at HathiTrust)
Final assessment of the bumper standard. Executive summary. (1979) (page images at HathiTrust)
Development of standards and tests for acceptance of traffic signal lenses. Final report. (1979), by David F. King (page images at HathiTrust)
An evaluation of standard 214. Technical report. (1979), by Charles Jesse Kahane (page images at HathiTrust)
Evaluation plan for Federal Motor Vehicle Safety Standard 208 occupant crash protection. (1979) (page images at HathiTrust)
Cost evaluation for four federal motor vehicle safety standards. Task VI additional bumpers, FMVSS 215 - exterior protection. Final report. (1978), by M. R. Harvey, C. B. Eckel, and David Cowan (page images at HathiTrust)
Study of the effects of applying federal motor vehicle safety standard 201 to light trucks and vans. Modification No. 2. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
Study of the effects of applying federal motor vehicle safety standards 203 & 204 to light trucks and vans. Modification No. 3. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
Passenger car/pedestrian impact protection system evaluation. Final report. (1979), by R. McLean, L. A. C. Barbarek, and O. J. Viergutz (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards: Task VIII - FMVSS 301, fuel system integrity - determination of the model year when manufacturers made changes to meet Standard's 1976 requirements. Final report. (1979), by R. F. McLean and G. Lisiecki (page images at HathiTrust)
Calculations and supporting material for the preliminary analysis of the bumper standard. (1979) (page images at HathiTrust)
Comments of Houdaille industries on the bumper standard. (1979) (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards - Vol. V. - FMVSS 213. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume I: FMVSS 105. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume II: FMVSS 108. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume III: FMVSS 122. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume IV: FMVSS 202 and 207. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume VI: FMVSS 220, 221 and 222. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
Cost evaluation for nine Federal Motor Vehicle Safety Standards - Task IX: FMVSS 214, side door strength, identification and cost evaluation of design and manufacturing changes. Final report. (1979), by M. R. Harvey and C. B. Eckel (page images at HathiTrust)
Review of procedures for determining corporate average fuel economy - Volume I: executive summary. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
Review of procedures for determining corporate average fuel economy - Volume II: technical report. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
Cost and economic impact of tire reserve load requirements. Final report. (1980), by O. J. Viergutz, S. Marek, C. Kelley, and H. Wakeley (page images at HathiTrust)
Cost evaluation for three Federal Motor Vehicle Safety Standards - FMVSS 203, 204, and 212. Final report. (1980), by R. F. McLean, C. B. Eckel, and J. A. Lesczhik (page images at HathiTrust)
Side impact conference. (Government Printing Office, Washington, D.C., 1980), by 31 Jan 1980-1 Feb 1980 Side Impact Conference (page images at HathiTrust)
An evaluation of Federal Motor Vehicle Safety Standards for passenger car steering assemblies. Standard 203 - impact protection for the driver. Standard 204 - rearward column displacement. (1981), by Charles Jesse Kahane (page images at HathiTrust)
Emergency medical services communications design manual. Final report. (1980), by C. Davis, Sandra Callahan, and F. Pethel (page images at HathiTrust)
Implementation analysis for daytime headlamp use. Final report. (1980), by D. M. Teague, L. E. Rohter, Leonard P. Gau, H. G. Wakeley, and O. J. Viergutz (page images at HathiTrust)
FMVSS no. 208 extension to light trucks, vans, and MPV's - cost/leadtime study. Final report. (1981), by R. Schwarz (page images at HathiTrust)
Multipiece rims for trucks, buses, and trailers - economic effects caused by further regulation of rims in Standard No. 120. Final report. (1981), by R. W. Gaines (page images at HathiTrust)
Review and evaluation of automotive fuel conservation technologies. Final summary report. (1981), by S. Marek, L. Rohter, and O. J. Viergutz (page images at HathiTrust)
Model police traffic services directives (policy, procedures, rules) for police executives. Final report. (1981), by R. H. Sosktowski, W. J. Nash, and R. C. Mayer (page images at HathiTrust)
Final regulatory analysis of the model year 1982 light truck fuel economy standards. (1980) (page images at HathiTrust)
An evaluation of head restraints - Federal Motor Vehicle Safety Standard 202. (1982), by Charles Jesse Kahane (page images at HathiTrust)
Review and evaluation of automotive fuel conservation technologies. Final report. (1981), by H. M. Siegel, R. Schwarz, J. Andon, G. Kollars, T. Gerstenberger, R. Gaines, Ronald Falk, and Stan Renick (page images at HathiTrust)
Comprehensibility standards for technical manuals. (1978) (page images at HathiTrust)
Cost evaluation for two Federal Motor Vehicle Safety Standards; FMVSS 113 Hood Latch - Passenger Cars; FMVSS 219 Windshield Zone Intrusion - Passenger Cars. Final report. (1982), by T. N. McVetty, A. J. Cross, and L. W. Parr (page images at HathiTrust)
Evaluation of Federal Motor Vehicle Safety Standard 301-75, Fuel System Integrity: Passenger Cars. (1983), by G. G. Parsons (page images at HathiTrust)
An evaluation of side structure improvements in response to Federal Motor Vehicle Safety Standard 214. (1982), by Charles Jesse Kahane (page images at HathiTrust)
A preliminary evaluation of two braking improvements for passenger cars - dual master cylinders and front disc brakes. (1983), by Charles Jesse Kahane (page images at HathiTrust)
Consumer cost evaluation of Federal Motor Vehicle Safety Standards - FMVSS 103 and 104. Final report. (1982), by John L. Gilmour (page images at HathiTrust)
An evaluation of side marker lamps for cars, trucks and buses. (1983), by Charles Jesse Kahane (page images at HathiTrust)
Feasibility of shipbuilding standards. Executive summary. (1976), by Kevin P. Gildart and James A. Burbank (page images at HathiTrust; US access only)
Report of Castine Conference: feasibility of shipbuilding standards (1976), by 7-9 June 1976 Feasibility of Shipbuilding Standards Conference (page images at HathiTrust; US access only)
Final report on a compendium of shipbuilding standards (U.S. Department of Commerce Maritime Administration, 1979), by Corporate-Tech Planning, Bath Iron Works, United States Maritime Administration, and National Shipbuilding Research Program. Task S-20 (page images at HathiTrust)
Propulsion plant standards feasibility study. Executive summary. (1975) (page images at HathiTrust; US access only)
Propulsion plant standards feasibility study. Final report. (1975) (page images at HathiTrust; US access only)
Recommended U.S. shipbuilding standards program long-range plan : final report. (National Shipbuilding Research Program, 1982), by Ishikawajima Jūkōgyō Kabushiki Kaisha, Inc IHI Marine Technology, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
Consensus QA/QC acceptance standards, Task S-31 of the Ship Producibility Research Program. (1982) (page images at HathiTrust; US access only)
Standard structural arrangements - a report of research conducted under MARAD Task S-11 of the Ship Producibility Research Program to determine the value of standard structural arrangements. (1978) (page images at HathiTrust; US access only)
Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume I. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume II. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
Scheduling standards pilot project. Summary report. (1982) (page images at HathiTrust; US access only)
A manual on planning and production control for shipyard use. (1978) (page images at HathiTrust; US access only)
Industrial engineering applications in the U.S. shipbuilding industry : May 25, 1982, New Orleans, Louisiana ([Bath Iron Works Corporation?], 1982), by Bath Iron Works, 25 May 1982 Industrial Engineering Application in the U.S. Shipbuilding Industry Symposium, and 25 May 1982 American Institute of Industrial Engineers' Industrial Engineering Conference (page images at HathiTrust; US access only)
Shipbuilding industry/production engineering workshop. Proceedings. (1978), by 21-24 Feb 1978 Shipbuilding Industrial/Production Engineering Workshop (page images at HathiTrust; US access only)
Improved planning and production control. (1977) (page images at HathiTrust; US access only)
Shipyard marking methods. (1980) (page images at HathiTrust; US access only)
Prefailure evaluation techniques for marine coatings. (1974) (page images at HathiTrust; US access only)
Surface preparation: a comparative analysis of existing standards - a proposed marine standard. (1983), by L. Jackel (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Executive summary. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Volume 1: report. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Standards. Volume 2: appendices. Final report. (1981) (page images at HathiTrust; US access only)
Technology Transfer Program (TTP). Quality assurance system. Executive summary. Final report. (1980) (page images at HathiTrust; US access only)
Japanese technology that could improve U.S. shipbuilding productivity. (1980) (page images at HathiTrust; US access only)
Mineral slag abrasive survey and specification. (1984) (page images at HathiTrust; US access only)
Draft U.S. merchant ship bridge design standards - report II. Final report. (1982), by K. L. Marino and R. B. Cooper (page images at HathiTrust; US access only)
Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
Shipbuilding design/production integration workshop. Volume I. Proceedings. (1981), by 18-21 Jan 1981 Shipbuilding Design/Production Integration Workshop (page images at HathiTrust; US access only)
Determination of volume solids of paints and coatings by accurate dry film thickness measurements. (1981) (page images at HathiTrust; US access only)
Work management manual - main assembly. Volume I. (1982) (page images at HathiTrust; US access only)
Work management manual - main assembly. Volume II. (1982) (page images at HathiTrust; US access only)
Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
Work management manual - electrical installation. Volume II. (1982) (page images at HathiTrust; US access only)
Work management manual - in-shop blast and paint. (1983) (page images at HathiTrust; US access only)
Work management manual - material handling for shipyards. (1983) (page images at HathiTrust; US access only)
Work management manual - hull erection. (1981), by D. Koelling, W. Inman, D. Phillips, and J. Schauske (page images at HathiTrust; US access only)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume I: executive summary. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume III: 1982 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume II: 1982 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume IV: 1983 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume V: 1983 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VI: 1984 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VII: 1984 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
A compendium of shipbuilding standards. Interim report on subtask I: regulatory body and classification body shipbuilding standards. (1979) (page images at HathiTrust; US access only)
A compendium of shipbuilding standards. Interim report on subtask II: industrial standards in shipbuilding use. (1979) (page images at HathiTrust; US access only)
A compendium of shipbuilding standards. Interim report on subtask III: foreign shipbuilding standards. (1979) (page images at HathiTrust; US access only)
FY-82 Labor Standards Program - pipe fabricating and blast and paint shops. (1983) (page images at HathiTrust; US access only)
Work management manual - pipe fabricating shop. (1981), by D. Fulwiler, D. Kressig, and J. Tong (page images at HathiTrust; US access only)
Back-up data for temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
Work management manual - general: temporary staging for ground assembly and aboard ship. (1982) (page images at HathiTrust; US access only)
Temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
An evaluation of windshield glazing and installation methods for passenger cars. (1985), by Charles Jesse Kahane (page images at HathiTrust)
Estimation of weight and consumer price relating to the implementation of FMVSS 105, 108, 202, 205, and 216 in passenger cars and 201, 203 and 205 in light trucks. Final report. (1982), by R. Gladstone, M. R. Harvey, J. Leschik, and R. McLean (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Appendix B - photographs. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume I. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume II. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume III. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
Computerized application of standards. Final report on task ES-8-22. (1985) (page images at HathiTrust; US access only)
Labor standards application program: electrical trade area. Final report. (1985) (page images at HathiTrust; US access only)
Product oriented safety and health management. (1986) (page images at HathiTrust; US access only)
Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 108 and 207. Final report. (1986), by Lloyd E. Carlson and P. Leonard (page images at HathiTrust)
An evaluation of the bumper standard - as modified in 1982. Technical report. (1987), by Warren G. La Heist and F. G. Ephraim (page images at HathiTrust)
Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 105-83. Final report. (1985), by G. J. Adams, Lloyd E. Carlson, and B. W. Firth (page images at HathiTrust)
Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
Data development of detail standards for outside machinery operations. (1985) (page images at HathiTrust; US access only)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume I. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume II. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume III. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume IV. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
Manual on uniform traffic control devices for streets and highways. (Government Printing Office, Washington, D.C., 1988) (page images at HathiTrust)
Motor vehicle regulations. Regulatory cost estimates could be improved. (1992) (page images at HathiTrust)
Study designs for passing sight distance requirements. Final report. (1992), by Warren Edward Hughes, Sarath C. Joshua, and Hugh W. McGee (page images at HathiTrust)
Motor vehicle fires in traffic crashes and the effects of the fuel system integrity standard. (1990), by G. G. Parsons (page images at HathiTrust)
Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume I. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume II. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
Cost and leadtime estimates for improved pillar padding, automatic slack adjusters, visual brake adjustment indicators and tractor/trailer ABS connections. Final report. (1994) (page images at HathiTrust)
[Cost per life saved by the FMVSS] (2004), by Charles Jesse Kahane (page images at HathiTrust)
Development and current status of the standard nuclear instrument module (NIM) system. (sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by Louis Costrell (page images at HathiTrust)
Standardization of Work Measurement. Volume 2, Clerical and Sales Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 3, Service Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 4, Farming, Fishery, Forestry, and Related Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 5, Processing Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 6, Machine Trades Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 7, Bench Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 8, Structural Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement, Volume 9, Miscellaneous Occupations (Transportation, Packaging, Materials Handling...). (Defense Technical Information Center, 1977), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Standardization of Work Measurement. Volume 10, Universal, (Common to Two or More Occupations). (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
Computer program for analysis of imperfection sensitivity of ring stiffened shells of revolution (National Aeronautics and Space Administration ;, 1971), by Gerald A. Cohen, Langley Research Center, and Philco-Ford Corporation (page images at HathiTrust)
La Convention du mètre et le Bureau international des poids et mesures (Gauthier-Villars, 1902), by Ch.-Ed. Guillaume (page images at HathiTrust; US access only)
Incremental cost, weight and leadtime impacts of adding improved padding to motor vehicle interiors. Final report. (1994), by K. W. Rutland, B. C. Spinney, J. S. Clements, and C. Westphal (page images at HathiTrust)
On the interior regularity of weak solutions of the navier-stokes equations ([Washington, D.C.] : Mathematics Division, Air Force Office of Scientific Research, 1961., 1961), by J. Serrin, United States. Air Force. Office of Scientific Research, and University of Minnesota. Institute of Technology (page images at HathiTrust)

More items available under broader and related terms at left.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.