The Online Books Page

Nuclear reactors -- Instruments

See also what's at your library, or elsewhere.

• Nuclear reactors
• Nuclear energy -- Instruments
• Nuclear engineering -- Instruments
• Nuclear physics -- Instruments
• Instruments

• Nuclear reactors -- Instruments -- Congresses
• Engineering test reactors -- Instruments
• Materials testing reactors -- Instruments
• Nuclear fuels -- Instruments
• Sodium cooled reactors -- Instruments
• Nuclear reactors -- Control -- Instruments
• Nuclear reactors -- Shutdown -- Instruments

• Installation and interference problems in reactor instrumentation systems (Argonne National Laboratory, 1958), by William K. Brookshier and Argonne National Laboratory (page images at HathiTrust)
• The performance of a special differential transformer and an eddy current coil in a high gamma flux environment (Argonne National Laboratory, 1959), by George J. Pokorny, James E. Ayer, and Argonne National Laboratory (page images at HathiTrust)
• Nuclear instrumentation and control of the D2O-moderated thoria-urania critical assembly (Zero Power Reactor VII) (Argonne National Laboratory, 1959), by C. A. Pesce and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• A steady-state differential calorimeter used to measure gamma heating in a reactor environment (Argonne National Laboratory, 1966), by Dale A. Herbst, James H. Talboy, and Argonne National Laboratory. Reactor Operations Division (page images at HathiTrust)
• Final specifications for government-purchased equipment for Argonne low power reactor (ALPR) (Argonne National Laboratory, 1959), by E. E. Hamer, H. H. Hooker, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Experimental boiling water reactor reactor pressure vessel revisions for instrumentation and increased steam output (Argonne National Laboratory, 1962), by T. L. Kettles, N. Balai, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Lecture notes on in-core instrumentation for the measurement of hydrodynamic parameters in water-cooled reactors (Argonne National Laboratory, 1961), by Glenn F. Popper and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Instrumented temperature-controlled capsules for irradiations in the Chicago Pile 5 reactor (Argonne National Laboratory, 1962), by W. N. Beck, R. J. Fousek, and Argonne National Laboratory. Metallurgy Division (page images at HathiTrust)
• A pinhole camera autoradiographic technique for encapsulated irradiated fuel specimens (Argonne National Laboratory, 1962), by W. N. Beck and Argonne National Laboratory. Metallurgy Division (page images at HathiTrust)
• Hazard summary report for the Argonne AGN-201 reactor (Argonne National Laboratory, 1962), by K. C. Ruzich, W. J. Sturm, and International Institute of Nuclear Science and Engineering (page images at HathiTrust)
• A data recording system for the fuel core tester (U.S. Atomic Energy Commission, 1960), by G. L. Waldkoetter, Hanford Works, and Hanford Atomic Products Operation. Engineering Operation (page images at HathiTrust)
• The study of multi-region reactors with an analog computer (U.S. Atomic Energy Commission, 1960), by J. C. Peden, Hanford Works, and Hanford Atomic Products Operation. Instrument Research and Development Operation (page images at HathiTrust)
• Level transducers for liquid metals (Oak Ridge National Laboratory, 1960), by R. G. Affel, R. E. Pidgeon, G. H. Burger, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Instrumentation and Controls Division (page images at HathiTrust)
• High temperature pressure transmitter evaluation (Oak Ridge National Laboratory, 1958), by W. R. Miller, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Instrumentation and Controls Division (page images at HathiTrust)
• Remote control of the LITR (Oak Ridge National Laboratory, 1956), by J. A. Cox, W. H. Tabor, L. C. Oakes, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Operations Division (page images at HathiTrust)
• Investigation into distortion of power burst shape as a function of finite instrument bandwidth and initial power (U.S. Atomic Energy Commission, Idaho Operations Office, 1958), by A. A. Wasserman and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Evaluation of surfaced-attached thermocouples dduring forced convection heat transfer (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by Edward Richard Oetken, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• ARMF II regulating rod readout and shim rod drive and position display (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by R. I. Little, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Dynamic pressure measurement devices in nuclear reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), by P. H. Hofhine, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Fuel plate resistance thermometer (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), by R. H. Meservey, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Modification of reactor instruments compensated ion chamber power supply (U.S. Atomic Energy Commission, Technical Information Service, 1952), by K. A. McCollom and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• A rod-type thermistor calorimeter (U.S. Atomic Energy Commission, Technical Information Service, 1953), by E. E. Burdick and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Interlock control system for MTR fast chopper (U.S. Atomic Energy Commission, Technical Information Service, 1955), by R. J. Preston and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• SPERT-I instrumentation (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), by F. L. Bentzen and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Design and development of a fuel plate surface thermocouple for special power excursion reactor tests (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), by Warren H. Giedt, D. L. Rall, Phillips Petroleum Company. Atomic Energy Division, and Detroit Controls Corporation (page images at HathiTrust)
• Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), by L. H. Jones, L. H. Jones, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Addendum to Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), by L. H. Jones, L. H. Jones, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Thermocouple attachment for the initial EOCR core (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by D. R. Conkling, T. L. Rasmussen, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Reactor core thermocouple locations (ECOR initial core) (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by R. G. Young, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• A 4096 channel two-dimensional analyzer for the MTR velocity selector (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by F. L. Petree, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Ionization chambers for reactor operation (Brookhaven National Laboratory, 1959), by Walter Lones, U.S. Atomic Energy Commission, Brookhaven National Laboratory, and Inc Associated Universities (page images at HathiTrust)
• Instrument Development Branch annual report for ... (U.S. Atomic Energy Commission, Idaho Operations Office., 1964), by U.S. Atomic Energy Commission. Idaho Operations Office, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Reducing nuclear power costs with improved instruments (E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1962), by John N. Wilson, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• In-core instrumentation development : first topical report. Task II, Phase I, Telemetering (U.S. Atomic Energy Commission, Division of Technical Information, 1962), by A. C. Duckart, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The development of linear power detection and recording instrument systems for the kinetic experiments on water boilers (Canoga Park, California : Atomics International, 1963., 1963), by E. L. Gardner, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Proceedings of the AMU-ANL Summer Study Program. : June 19 - Jul 14, 1961. (Argonne National Laboratory, Industrial Hygiene and Safety Division, 1962), by Argonne National Laboratory (page images at HathiTrust)
• Facility for photographing in-pile meltdown experiments in Transient Reactor Test (Argonne National Laboratory, 1962), by G. H. Golden, L. E. Robinson, C. E. Dickerman, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Interim report : FARET experimental program (Argonne National Laboratory, Reactor Engineering Division, 1963), by Argonne National Laboratory (page images at HathiTrust)
• Design and analysis of instrumented subassembly system for EBR-II (Argonne, Illinois. : Argonne National Laboratory, 1968., 1968), by A. Smaardyk, E. Hutter, R. H. Olp, C. J. Divona, and Argonne National Laboratory (page images at HathiTrust)

• Proceedings of the U.S. Nuclear Regulatory Commission Review Group Conference on Advanced Instrumentation for Reactor Safety Research (Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research, 1979), by Md.) Review Group Conference on Advanced Instrumentation for Reactor Safety Research (1979 : Silver Spring, T. Weber, A. L. Hon, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Proceedings. (Argonne National Laboratory, 1967), by Symposium on Liquid Metal Instrumentation and Control (1967 : Idaho Falls), Joseph M. Harrer, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)

• Engineering test reactor nuclear instrumentation : final report (Idaho Operations Office, U.S. Atomic Energy Commission, 1960), by D. C. Hanson, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)

• Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1957), by L. H. Jones, L. H. Jones, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Addendum to Instrument and electrical standard practices for Materials testing reactor and Engineering test reactor (U.S. Atomic Energy Commission, Idaho Operations Office, 1959), by L. H. Jones, L. H. Jones, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)

• Sodium Reactor Experiment Mark II fuel handling machine (Atomics International, 1965), by H. B. Dietz, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Design and thermal analysis of sodium specialties components for Hallam Nuclear Power Facility (Atomics International, 1961), by W. M. Hoschouer, R. J. Mack, W. D. Leonard, D. F. Casey, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Development of a rapid-operating plugging meter (Atomics International, 1959), by Kirk Davis, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Materials testing reactor automatic wire scanner (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), by R. J. Preston, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Safety device tests in Special Power Excursion Reactor Test-I (Atomics International, 1958), by Stephen H. Fitch, Thomas H. Springer, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Safety device test in Kinetic Experiments on Water Boilers I (Canoga Park, California : Atomics International, [1958], 1958), by Charles C. Weeks, Stephen H. Fitch, U.S. Atomic Energy Commission, and North American Aviation. Atomics International Division (page images at HathiTrust)

• An electronic trip system for reactor protection : model D (Knolls Atomic Power Laboratory, General Electric Company, 1956), by E. J. Wade, D. S. Davidson, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)

More items available under narrower terms.