Screw-threads -- StandardsSee also what's at your library, or elsewhere.
Broader terms:Narrower terms: |
Filed under: Screw-threads -- Standards -- United States
Filed under: Screw-threads, Standard -- Standards -- United States
Items below (if any) are from related and broader terms.
Filed under: Screw-threads- ASME screw thread manual; a shop and drafting room abridgment of the American-unified standards for screw threads and their gages (New York, 1953), by American Society of Mechanical Engineers and Henry R. Cobleigh (page images at HathiTrust)
- Die gewinde, ihre entwicklung, ihre messung und ihre toleranzen (J. Springer, 1925), by Georg W. Berndt (page images at HathiTrust; US access only)
- Screw-thread manual (Chemical publishing co., inc., 1942), by F. J. Camm (page images at HathiTrust)
- Screw-thread standards for Federal services, 1957. (U.S. Govt. Print. Off., 1957), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Dardelet thread handbook for engineers, designers, and mechanics (Dardelet threadlock corporation, 1933), by New York Dardelet threadlock corporation (page images at HathiTrust)
- Screw thread cutting manual. (New Haven, 1946), by Conn.). New Haven Geometric Tool Company (New Haven (page images at HathiTrust)
- Screw thread production to close limits, manufacturing methods of threading and tapping and the special tools developed for accurate quantity production (The Stirling Press, 1920), by Howard Elsworth Adt (page images at HathiTrust; US access only)
- Progress report of the National screw thread commission (authorized by Congress, July 18, 1918, H. R. 10852) as approved June 19, 1920. January 4, 1921 ... (Govt. print. off., 1921), by United States. National Screw Thread Commission (page images at HathiTrust)
- Report of the National screw thread commission (revised 1928) (authorized by Congress, July 18, 1918, H. R. 10852) as approved June 22, 1928 ... (U. S. Govt. print. off., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- Screw-thread standards for Federal services, 1944 : superseding Handbook H28, 1942. (available from Supt. of Docs., U.S. G.P.O., 1945), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Graphic comparison of screw thread pitches, showing the number of threads per inch and pitch in millimeters for both inch and millimeter systems. ([Washington], 1922), by United States. National Bureau of Standards (page images at HathiTrust)
- Screw-thread standards for Federal Services, 1957. (U.S. Govt. Print. Off., 1962), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- 1950 supplement to screw-thread standards for Federal Services, 1944 (U.S. Govt. Print. Off., 1951), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Screw-thread standards for federal services, 1942. (U.S. Govt. print. off., 1942), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Screw-thread standards for federal services, 1939. (Superseding the Reports of the National screw thread commission) (U.S. Govt. print. off., 1940), by United States. National screw thread commission and United States (page images at HathiTrust)
- Report of the National Screw Thread Commission. (Govt. Print. Off., 1925), by United States. National Screw Thread Commission (page images at HathiTrust)
- Report of the National screw thread commission. (U.S. Govt. print. off., 1933), by United States. National Screw Thread Commission (page images at HathiTrust)
- Screw-thread standards for Federal services. (U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by United States. Interdepartmental Screw Thread Committee, United States. Department of Commerce, and United States. National Bureau of Standards (page images at HathiTrust)
- American national screw thread tables for shop use ... <Recommended commercial standard> September 23[-24] 1929. (U.S. Govt. Print. Off., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- Tests of strength of screw-threads, series of 1911 (1911), by William Bristol Slaughter and Charles Algot Carlson (page images at HathiTrust; US access only)
- Screw-thread standards for Federal Services, 1957. (For sale by the Supt. of Docs., U.S. G.P.O., 1960), by United States. Interdepartmental Screw Thread Committee and United States. National Bureau of Standards (page images at HathiTrust)
- To provide for the appointment of a commission to standardize screw-thread tolerances : hearings before the Committee on Coinage, Weights, and Measures, House of Representatives, Sixty-fourth Congress, second session, on H.R. 20292. January 27, 1917, February 5, 1917. (G.P.O., 1917), by United States House Committee on Coinage, Weights, and Measures (page images at HathiTrust)
- Acme and other translating threads. ([The American society of mechanical engineers, 1941), by American Standards Association (page images at HathiTrust; US access only)
- Notes on screw gauges (H.M.S.O., 1930), by National Physical Laboratory (Great Britain). Metrology Dept (page images at HathiTrust)
- Report of the National Screw Thread Commission : (authorized by Congress, July 18, 1918, H.R. 10852) as approved June 22, 1928. (Washington : Govt. Print. Off, 1929., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- Bausch & Lomb contour measuring projector ... (Bausch & Lomb Optical Co., 1922), by Baush & Lomb Optical Company (page images at HathiTrust)
- Screw threads and tap-drill sizes (Washington, D.C. : U.S. Department of Commerce, National Bureau of Standards, 1943., 1943), by United States. National Bureau of Standards (page images at HathiTrust)
Filed under: Screw-threads -- Bibliography- Screw threads; bibliography of available material on the systems, and classification of screw threads, including tolerances, allowances and symbols of nomenclature; and on gages, methods of testing and specifications. [August to October, 1918] Prepared at request of the U.S. Screw thread commission and arranged in alphabetic order according to authors and titles, and with an index. (Press of the Engineer school, 1918), by Henry Ernest Haferkorn and U.S. Army Engineer School (page images at HathiTrust)
- Screw threads ; a bibliography of available material on screw thread theory, standards, production methods, and gaging methods. (Springfield, Vt., 1942), by Springfield Jones and Lamson Machine Company, United States. Council of National Defense. National Defense Research Committee, and Springfield Bryant Chucking Grinder Company (page images at HathiTrust; US access only)
Filed under: Screw-threads -- Handbooks, manuals, etc.
Filed under: Screw-threads -- TestingFiled under: Screw-threads, Standard- Bolt, nut and rivet standards (Cleveland, Ohio, 1941) (page images at HathiTrust)
- Screw-thread manual (Chemical publishing co., inc., 1942), by F. J. Camm (page images at HathiTrust)
- Bolt, nut and rivet standards. (Cleveland, 1952), by Industrial Fasteners Institute and Nut and Rivet Manufacturers. Bolt American Institute of Bolt (page images at HathiTrust)
- American standard screw threads for bolts, machine screws, nuts, and commercially tapped holes. Report of Sectional Committee on the Standardization and Unification of Screw Threads prepared in collaboration with The National Screw Thread Commission on which the S.A.E. and the A.S.M.E. are the two civilian participating organizations. Approved by the American Engineering Standards Committee, May, 1924. Sponsor societies: Society of Automotive Engineers, The American Society of Mechanical Engineers ... (New York. [New York?, 1924), by Society of Automotive Engineers, U.S. National screw thread commission. American standards association American society of mechanical engineers, and Sectional committee on the standardization and unification of screw threads (page images at HathiTrust)
- Screw-thread standards for Federal services, 1957. (U.S. Govt. Print. Off., 1957), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Unified screw thread standards. (U.S. Govt. Print. Off., 1949), by United States. National Bureau of Standards (page images at HathiTrust)
- Report of the board to recommend a standard gauge for bolts, nuts, and screw-threads for the United States Navy. May, 1868. (Gov't Print. Off., 1880), by United States. Navy Dept. Bureau of Engineering (page images at HathiTrust)
- Progress report of the National screw thread commission (authorized by Congress, July 18, 1918, H. R. 10852) as approved June 19, 1920. January 4, 1921 ... (Govt. print. off., 1921), by United States. National Screw Thread Commission (page images at HathiTrust)
- Report of the National screw thread commission (revised 1928) (authorized by Congress, July 18, 1918, H. R. 10852) as approved June 22, 1928 ... (U. S. Govt. print. off., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- Screw-thread standards for Federal services, 1944 : superseding Handbook H28, 1942. (available from Supt. of Docs., U.S. G.P.O., 1945), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Commission to standardize screw threads. Hearings before the Committee on coinage, weights, and measures, House of Representatives, Sixty-fifth Congress, second session, on H.R. 10472. March 5 and 7, 1918. (Govt. Print. Off., 1918), by United States House Committee on Coinage, Weights, and Measures (page images at HathiTrust)
- Screw-thread standards for Federal Services, 1957. (U.S. Govt. Print. Off., 1962), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Screw-thread standards for Federal services, 1957. (U.S. Govt. Print. Off., 1957), by United States. National Bureau of Standards (page images at HathiTrust)
- 1950 supplement to screw-thread standards for Federal Services, 1944 (U.S. Govt. Print. Off., 1951), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Screw-thread standards for federal services, 1942. (U.S. Govt. print. off., 1942), by United States. Interdepartmental Screw Thread Committee (page images at HathiTrust)
- Screw-thread standards for federal services, 1939. (Superseding the Reports of the National screw thread commission) (U.S. Govt. print. off., 1940), by United States. National screw thread commission and United States (page images at HathiTrust)
- Machinery's screw thread book. (Machinery Publishing, 1919), by Clarence Edgar Allen (page images at HathiTrust; US access only)
- Report of the National Screw Thread Commission. (Govt. Print. Off., 1925), by United States. National Screw Thread Commission (page images at HathiTrust)
- Report of the National screw thread commission. (U.S. Govt. print. off., 1933), by United States. National Screw Thread Commission (page images at HathiTrust)
- Screw-thread standards for Federal services. (U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by United States. Interdepartmental Screw Thread Committee, United States. Department of Commerce, and United States. National Bureau of Standards (page images at HathiTrust)
- American national screw thread tables for shop use ... <Recommended commercial standard> September 23[-24] 1929. (U.S. Govt. Print. Off., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- Screw-thread standards for Federal Services, 1957. (For sale by the Supt. of Docs., U.S. G.P.O., 1960), by United States. Interdepartmental Screw Thread Committee and United States. National Bureau of Standards (page images at HathiTrust)
- To provide for the appointment of a commission to standardize screw-thread tolerances : hearings before the Committee on Coinage, Weights, and Measures, House of Representatives, Sixty-fourth Congress, second session, on H.R. 20292. January 27, 1917, February 5, 1917. (G.P.O., 1917), by United States House Committee on Coinage, Weights, and Measures (page images at HathiTrust)
- Report of conferences on standardization of screw threads and cylindrical fits. (U.S. Govt. print. off., 1944), by Combined Production and Resources Board (page images at HathiTrust; US access only)
- Report of Board to recommend a standard gauge for bolts, nuts, and screw-threads, for the United States Navy, May, 1868. (Govt. Print. Off., 1868), by United States. Navy Dept. Bureau of Engineering (page images at HathiTrust)
- Report of the National Screw Thread Commission : (authorized by Congress, July 18, 1918, H.R. 10852) as approved June 22, 1928. (Washington : Govt. Print. Off, 1929., 1929), by United States. National Screw Thread Commission (page images at HathiTrust)
- American standard unified screw threads (including American national threads) for screws, bolts, nuts, and other threaded parts. (American Society of Mechanical Engineers, 1960), by B-1 American Standards Association. Sectional Committee on Standardization and Unification of Screw Threads and Society of Automotive Engineers (page images at HathiTrust; US access only)
- Screw threads and tap-drill sizes (Washington, D.C. : U.S. Department of Commerce, National Bureau of Standards, 1943., 1943), by United States. National Bureau of Standards (page images at HathiTrust)
More items available under broader and related terms at left. |