The Online Books Page

Shafting -- Testing

See also what's at your library, or elsewhere.

• Shafting
• Machinery -- Testing
• Testing

• Keys and keyways (Machinery) -- Testing

• An investigation of the effect of keyways on the torsional strength of shafts (1908), by Frank Earl Leidendeker (page images at HathiTrust; US access only)

• An investigation of the effect of keyways on the torsional strength of shafts (1908), by Frank Earl Leidendeker (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• On torsional vibrations in axles and shafting. (Dulau and co., 1905), by Karl Pearson (page images at HathiTrust)
• Long-tail shaft drive for energy efficient boats : final report (Pacific Southwest Region, U.S. Dept. of Energy, 1981), by Herman Hastrup and United States. Department of Energy. Region IX. (page images at HathiTrust)
• The strength of shafts in vibration (C. Lockwood and son, 1929), by Joseph Morris (page images at HathiTrust; US access only)
• Flexible shaft handbook. (The Company, 1929), by White Dental Manufacturing Company (page images at HathiTrust)
• Flexible shaft handbook. (S.S. White, Industrial division, 1951), by White Dental Manufacturing Company (page images at HathiTrust)
• Analysis and design of the frozen seal (Oak Ridge National Laboratory, 1957), by J. F. Bailey, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory (page images at HathiTrust)
• Transmission device for reversibility of rotation with extremely fast action (National Aeronautics and Space Administration, 1961), by J. Boehm, J. F. Blanche, A. L. Herrmann, and George C. Marshall Space Flight Center (page images at HathiTrust)
• Fortran IV computer program for calculating critical speeds of rotating shafts (National Aeronautics and Space Administration ;, 1973), by Roger J. Trivisonno and Lewis Research Center (page images at HathiTrust)
• A practical treatise on mill-gearing, wheels, shafts, riggers, etc. : for the use of engineers (E. & F.N. Spon, 1869), by Thomas Box (page images at HathiTrust)
• Shaft governors. (D. Van Nostrand company, 1906), by W. Trinks and Chenoweth Housum (page images at HathiTrust)
• Shaft governors (D. Van Nostrand company, 1905), by W. Trinks and Chenoweth Housum (page images at HathiTrust)
• Computing the critical frequencies of stepped shafts (Los Alamos Scientific Laboratory of the University of California, 1963), by Burton Wendroff, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An investigation of the effect of keyways on the torsional strength of shafting (1910), by Leroy Morrell Dunsheath and Carlysle Pemberton (page images at HathiTrust; US access only)
• Modern shafting and gearing, and the economical transmission of power; a handbook for power users. (W. Rider and son, limited, 1893), by M. Powis Bale (page images at HathiTrust)
• A practical treatise on mill-gearing, wheels, shafts, riggers, etc., for the use of engineers. (E. & F.N. Spon, 1888), by Thomas Box (page images at HathiTrust)
• Shaft seals for compressors and turbines for gas-cooled reactor application : proceedings of meeting at Oak Ridge National Laboratory, December 16-17, 1959 (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1959., 1959), by W. F. Boudreau, Oak Ridge National Laboratory, U.S. Atomic Energy Commission, and Tenn.) Meeting on Shaft Seals for Compressors and Turbines for Gas-Cooled Reactor Application (1959 : Oak Ridge (page images at HathiTrust)
• The effect of keyways on the strength of shafts (The University, 1909), by Herbert F. Moore (page images at HathiTrust)
• Bearings and shafting ... (U.S. Gov't Print. Off.], 1945), by United States. Navy Dept. Bureau of Ships (page images at HathiTrust)
• Design criteria for high-speed power-transmission shafts. Part 1, Analysis of critical speed effects and damper support location (Wright-Patterson Air Force Base, Ohio : Flight Accessories Laboratory, Directorate of Aeromechanics, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by R. G. Dubensky, J. E. Voorhees, C. C. Mellor, United States. Air Force. Systems Command. Aeronautical Systems Division, and Battelle Memorial Institute (page images at HathiTrust)

• Design analysis of a self-acting spiral-groove ring seal for counter-rotating shafts (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Eliseo DiRusso and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Estimation of stiffening effect of shaft and housing material outside projected area of a rolling element bearing (National Aeronautics and Space Administration ;, 1977), by Christopher M. Taylor, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Computing the critical frequencies of stepped shafts (Los Alamos Scientific Laboratory of the University of California, 1963), by Burton Wendroff, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Gas ingestion and sealing capacity of helical groove fluid film seal (viscoseal) using sodium and water as sealed fluids (National Aeronautics and Space Administration ;, 1966), by Lawrence P. Ludwig, Gordon P. Allen, Thomas N. Strom, and Lewis Research Center (page images at HathiTrust)

• Shaft seals for compressors and turbines for gas-cooled reactor application : proceedings of meeting at Oak Ridge National Laboratory, December 16-17, 1959 (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1959., 1959), by W. F. Boudreau, Oak Ridge National Laboratory, U.S. Atomic Energy Commission, and Tenn.) Meeting on Shaft Seals for Compressors and Turbines for Gas-Cooled Reactor Application (1959 : Oak Ridge (page images at HathiTrust)

• Reliability approach to rotating-component design (National Aeronautics and Space Administration ;, 1975), by Dimitri Kececioglu, Vincent R. Lalli, and Lewis Research Center (page images at HathiTrust)

• Dynamics of rotating shafts (Shock and Vibration Information Center; [for sale by the Navy Publication and Print. Service Office, Naval District Washington, Washington Navy Yard], 1970), by Robert G. Loewy, Vincent J. Piarulli, and Shock and Vibration Information Center (page images at HathiTrust; US access only)
• Design and application of a test rig for super-critical power transmission shafts (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by M. Darlow, A. Smalley, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Heat treatment of steel for shafting (1916), by Otis Avery Barnes (page images at HathiTrust)
• A study of the internal stresses in cold-rolled shafting (1912), by F. J. Schlink and Herbert Percy Thompson (page images at HathiTrust)
• Notes on the theory of shaft governors (s.n., 1894), by Albert K. Mansfield and American Society of Civil Engineers (page images at HathiTrust)

• Turboalternator CSU I-3A (National Aeronautics and Space Administration, 1965), by inc Thompson Ramo Wooldridge and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Reliability approach to rotating-component design (National Aeronautics and Space Administration ;, 1975), by Dimitri Kececioglu, Vincent R. Lalli, and Lewis Research Center (page images at HathiTrust)

• Ueber triebwerkbeanspruchung bei elektr. lokomotiven, mit besonderer berücksichtigung des kurbelantriebs (Rascher & co., 1914), by Walter Kummer (page images at HathiTrust; US access only)
• Pollution prevention assessment for a manufacturer of rebuilt industrial crankshafts (U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995), by Harry W. Edwards, Gwen P. Looby, Michael F. Kostrzewa, and National Risk Management Research Laboratory (U.S.) (page images at HathiTrust)
• Beitrag zur bestimmung der formveränderung gekröpfter kurbelwellen (Springer, 1906), by Georg Duffing (page images at HathiTrust; US access only)
• Certain forged steel crankshafts from Brazil determination of the Commission in investigation no. 701-TA-282 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)
• Certain forged steel crankshafts from Brazil, the Federal Republic of Germany, Japan, and the United Kingdom : determination of the Commission in investigation no. 701-TA-282 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation : determinations of the Commission in investigations no. 731-TA-351 through 353 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1986), by United States International Trade Commission (page images at HathiTrust)
• Certain forged steel crankshafts from the Federal Republic of Germany, and the United Kingdom : determinations of the Commission in investigations no. 731-TA-351 and 353 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)

• Flexible shaft handbook. (The, Industrial Division, 1944), by Samuel S. White (Firm) (page images at HathiTrust)
• Balancing techniques for high-speed flexible rotors (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by A. J. Smalley, R. A. Rio, J. M. Tessarzik, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Transient dynamics of a flexible rotor with squeeze film dampers (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, D. F. Buono, and United Technologies Corporation (page images at HathiTrust)

• An investigation of the effect of keyways on the torsional strength of shafting (1910), by Leroy Morrell Dunsheath and Carlysle Pemberton (page images at HathiTrust; US access only)

• Optical Tooling for Precise Manufacture and Alignment (New York et al.: McGraw-Hill Book Co., 1962), by Philip Kissam (page images at HathiTrust)
• Measurements through a hot cell window using optical tooling (Oak Ridge National Laboratory, 1959), by A. A. Abbatiello and U.S. Atomic Energy Commission (page images at HathiTrust)
• A systematic study of focal ratios and effects of optical misalignment for LST (National Aeronautics and Space Administration ;, 1974), by Charles L. Wyman and George C. Marshall Space Flight Center (page images at HathiTrust)

• Power plant testing; a manual of testing engines, turbines, boilers, pumps, refrigerating machinery, fans, fuels, materials of construction, etc. (McGraw-Hill book company, 1911), by James Ambrose Moyer (page images at HathiTrust)
• Power plant testing; a manual of testing engines, turbines, boilers, pumps, refrigerating machinery, fans, fuels, lubricants, materials of construction, etc. (McGraw-Hill Book Company, Inc., 1913), by James Ambrose Moyer (page images at HathiTrust)
• Power plant testing; a manual of testing engines, turbines, boilers, pumps, refrigerating machinery, fans, fuels, lubricants, materials of construction, etc. (McGraw-Hill Book Company, inc., 1926), by James Ambrose Moyer (page images at HathiTrust)
• Mechanical testing; a treatise in two volumes (E. P. Dutton & company, 1922), by Reginald George Cyril Batson and James Henry Hyde (page images at HathiTrust)
• Mechanical testing ... (E.P. Dutton & company, 1931), by Reginald George Cyril Batson and James Henry Hyde (page images at HathiTrust)
• Die arbeitsgenauigkeit der werkzeugmaschinen (J. Springer, 1927), by Georg Schlesinger (page images at HathiTrust; US access only)
• A text-book of experimental engineering. For engineers and for students in engineering laboratories. (J. Wiley & Sons, 1892), by Rolla C. Carpenter (page images at HathiTrust)
• Experimental engineering ... (John Wiley & Sons, 1907), by Rolla C. Carpenter (page images at HathiTrust)
• Experimental engineering and manual for testing : for engineers and for students in engineering laboratories (J. Wiley, 1913), by Rolla C. Carpenter and Herman Diederichs (page images at HathiTrust)
• Experimental engineering. For engineers and for students in engineering laboratories. (J. Wiley & Sons, 1893), by Rolla C. Carpenter (page images at HathiTrust)
• Mechanical testing (Chapman & Hall, ltd., 1922), by Reginald George Cyril Batson and James Henry Hyde (page images at HathiTrust; US access only)
• Experimental engineering and manual for testing. For engineers and for students in engineering laboratories. (J. Wiley & Sons; [etc., etc.], 1906), by Rolla C. Carpenter (page images at HathiTrust)
• Experimental engineering and manual for testing, for engineers and for students in engineering laboratories (J. Wiley & Sons; [etc., etc.], 1911), by Rolla C. Carpenter and Herman Diederichs (page images at HathiTrust)
• Experimental engineering and manual for testing. For engineers and for students in engineering laboratories. (J. Wiley & Sons, 1910), by Rolla C. Carpenter (page images at HathiTrust)
• Final report on the "Motion transformer". (Washington, D.C., 1945), by United States. War Production Board. Office of Production Research and Development (page images at HathiTrust)
• Experimental engineering and manual for testing. (J. Wiley & sons; [etc., etc., 1892), by Rolla C. Carpenter and Herman Diederichs (page images at HathiTrust)
• Experimental engineering and manual for testing. (J. Wiley & son, 1897), by Rolla Clinton Carpenter (page images at HathiTrust)
• MFPG : detection, diagnosis, and prognosis, contribution to the energy challenge : proceedings of the 32nd meeting of the Mechanical Failures Prevention Group, held at the Inn at Santa Monica, Santa Monica, California, October 7-9, 1980 (U.S. Dept. of Commerce, National Bureau of Standards :, 1981), by Mechanical Failures Prevention Group, William A. Willard, T. R. Shives, Center for Materials Science (U.S.), and United States. National Bureau of Standards (page images at HathiTrust)
• Experimental engineering : for engineers and for students in engineering laboratories (J. Wiley & Sons, 1896), by Rolla C. Carpenter (page images at HathiTrust)
• Stress analysis of a 30 ton Hanna riveter (1916), by Norris E. March and Henry Earl Morton (page images at HathiTrust; US access only)
• Rules for conducting preformance tests of power plant apparatus, embracing, 1, boilers; 2, reciprocating steam engines; 3, steam turbines; 4, pumping machinery; 5, compressors, blowers, and fans; 6, complete steam power plants; 7, locomotives; 8, gas producers; 9, gas and oil engines; 10, waterwheels. Codes of 1915 ([publisher not identified], 1916), by American society of mechanical engineers. Power test committee (page images at HathiTrust)
• Calibration of a beam testing machine (1926), by Charles J. Mitchell (page images at HathiTrust)
• Experimental engineering and manual for testing. (J. Wiley & Sons;, 1913), by Rolla C. Carpenter (page images at HathiTrust)

More items available under broader and related terms at left.