The Online Books Page

Steel -- Standards

See also what's at your library, or elsewhere.

• Steel
• Iron -- Standards
• Standards

• Building, Iron and steel -- Standards
• Steel, Galvanized -- Standards
• Steel, Structural -- Standards

• Determination of oxygen in ferrous materials SRM 1090, 1091, and 1092 (U.S. Dept. of Commerce, National Bureau of Standards; For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1966), by Oscar Menis and J. T. Sterling (page images at HathiTrust; US access only)

• Policy guide to steel moment frame construction (Federal Emergency Management Agency, 2001), by R. O. Hamburger, United States Federal Emergency Management Agency, and SAC Joint Venture (page images at HathiTrust)

• Policy guide to steel moment frame construction (Federal Emergency Management Agency, 2001), by R. O. Hamburger, United States Federal Emergency Management Agency, and SAC Joint Venture (page images at HathiTrust)

• Decision table formulation of the 1969 AISC specification (University of Illinois, 1969), by Steven J. Fenves, S. K. Goel, Edwin H. Gaylord, and American Institute of Steel Construction (page images at HathiTrust)

• Standard grade galvanized ware fabricated from pregalvanized steel sheets (Washington, D.C. : United States Government Printing Office, 1960., 1960), by United States. National Bureau of Standards (page images at HathiTrust)
• Steel chain link galvanized fence fabric ([Washington, D.C.] : U.S. Deparment of Commerce, Office of Technical Services, Commodity Standards Division, [1962], 1962), by United States. National Bureau of Standards and United States. Department of Commerce. Office of Technical Services (page images at HathiTrust)

• Standard grade galvanized ware fabricated from pregalvanized steel sheets (Washington, D.C. : United States Government Printing Office, 1960., 1960), by United States. National Bureau of Standards (page images at HathiTrust)
• Steel chain link galvanized fence fabric ([Washington, D.C.] : U.S. Deparment of Commerce, Office of Technical Services, Commodity Standards Division, [1962], 1962), by United States. National Bureau of Standards and United States. Department of Commerce. Office of Technical Services (page images at HathiTrust)

• Standard grade hot-dipped galvanized ware : (coated after fabrication) (Washington, D.C. : United States Government Printing Office, 1960., 1960), by United States. National Bureau of Standards (page images at HathiTrust)

• Simplified structural steel shapes : approved by Office of Production Management. (United States Steel, 1941), by United States Steel Corporation and United States. Office of Production Management (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• The physico-chemical properties of steel. (C. Griffin & company, limited, 1916), by C. A. Edwards (page images at HathiTrust; US access only)
• Les aciers spéciaux (Vve Ch. Dunod, 1904), by Léon Guillet and Henri Le Chatelier (page images at HathiTrust; US access only)
• Steel and its heat treatment (J. Wiley, 1948), by D. K. Bullens and Battelle Memorial Institute (page images at HathiTrust)
• Aircraft steels and material (Constable & Co. Ltd., 1922), by Ralph Kirkby Bagnall-Wild, William Arthur Thain, A. J. Rowland, Alfred Arnold Remington, and Leslie Aitchison (page images at HathiTrust; US access only)
• Metallurgical dialogue (American society for metals, 1935), by Albert Sauveur (page images at HathiTrust)
• Study of the decomposition of the austenitic structure in hardened steels ... ([Cleveland, 1927), by Ralph Lewis Dowdell and Oscar Edward Harder (page images at HathiTrust)
• Iron and steel (a pocket encyclopedia) including allied industries and sciences. (McGraw-Hill book company, inc., [etc., etc. ], 1919), by Hugh P. Tiemann (page images at HathiTrust)
• Handbook of special steels, their properties, uses, fabricators. (Allegheny Ludlum steel corporation, 1940), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Modern steels and their properties : carbon and alloy steel bars. ([s.n.], 1959), by Bethlehem Steel Corporation (page images at HathiTrust)
• Ferrous metallurgical design; design principles for fully hardened steel (J. Wiley & sons, inc.;, 1947), by J. Herbert Hollomon and Leonard David Jaffe (page images at HathiTrust)
• Heat treatment of metals (Chemical publishing company, inc., 1943), by John Winning (page images at HathiTrust)
• Ingots and ingot moulds (Longmans, Green, 1918), by Arthur W. Brearley and Harry Brearley (page images at HathiTrust; US access only)
• The alloys of iron and carbon (Pub. for the Engineering foundation by McGraw-Hill, 1936), by Samuel Epstein, Frank T. Sisco, and Battelle Memorial Institute (page images at HathiTrust; US access only)
• Manufacture and uses of alloy steels (J. Wiley & Sons, Inc.; [etc., etc.], 1919), by Henry D. Hibbard (page images at HathiTrust)
• The alloys of iron and chromium (Published for the Engineering foundation by McGraw-Hill, 1937), by Augustus Braun Kinzel, Russell Franks, Walter Crafts, and Engineering Foundation (U.S.) (page images at HathiTrust; US access only)
• Titanium and its use in steel. (Titanium Alloy Manufacturing Company, 1940) (page images at HathiTrust)
• A treatise on the progressive improvement and present state of the manufactures in metal. (Printed for Longman, Rees, Orme, Brown, and Green [etc.], 1831), by John Holland (page images at HathiTrust)
• Heat treatment of metals (International textbook company, 1933), by Orin W. McMullan (page images at HathiTrust)
• Elementary foundry technology. (The Penton publishing co., 1941), by Lawrence A. Hartley, Pat Dwyer, and Edwin Bremer (page images at HathiTrust)
• Steel and its heat treatment (Wiley, 1916), by D. K. Bullens (page images at HathiTrust)
• Nitriding furnaces; a practical exposition of their constructional features, capacities, operation and instrumentation, with notes on ammonia, its handling, etc. (The Nitralloy Corp., 1943), by David Landau and New York Nitralloy Corporation (page images at HathiTrust)
• The hardening and tempering of steel, in theory and practice (Scott, Greenwood & Co., 1903), by Fridolin Reiser, Herbert Robson, and Arthur Morris (page images at HathiTrust; US access only)
• The scientific steel worker; a practical manual for steel workers and blacksmiths. (Wheeling news litho. co., 1907), by Ozro A. Westover (page images at HathiTrust)
• Fabrication of Lukens clad steels (Coatesville, Pa., 1948), by Lukens Steel Company and Leonard W. Williams (page images at HathiTrust)
• A metallurgical study of the steel base as related to galvanizing; being volume number one of a series on the manufacture of sheet steel (The Matthews-Northrup works, 1918), by G. A. White (page images at HathiTrust)
• Steel: its history, manufacture, properties, and uses. (E. &. F. N. Spon, 1880), by J. Stephen Jeans (page images at HathiTrust)
• Steel thermal treatment (C. Lockwood and son, 1922), by J. W. Urquhart (page images at HathiTrust; US access only)
• Steel works analysis (Sir I. Pitman & sons, ltd., 1920), by John Oliver Arnold and Fred Ibbotson (page images at HathiTrust)
• Strength and structure of steel and other metals. (E. Arnold & co., 1923), by W. E. Dalby (page images at HathiTrust)
• Contribution à l'étude de la fragilité dans les fers et les aciers. (Siège de la Société, 1904), by Société d'encouragement pour l'industrie nationale (page images at HathiTrust; US access only)
• Iron and steel. The elasticity, extensibility and tensile strength of iron and steel. (J. Murray, 1869), by Knut Styffe and Christer Peter Sandberg (page images at HathiTrust)
• Preservation of iron and steel by means of passivifying factors (H.C. Pigott Printing Concern, 1920), by Thomas G. Thompson (page images at HathiTrust)
• The effects of cold-working on the elastic properties of steel ([London, 1918), by John A. Van den Broek (page images at HathiTrust; US access only)
• Recherches physiques et physico-chimiques sur l'acier au carbone : thèse pour le doctorat (Librairie de l'Université (C.J. Lundström), 1904), by Carl Axel Fredrik Benedicks (page images at HathiTrust; US access only)
• Elevated-temperature proerties of carbon steels (American Society for Testing Materials, 1955), by Ward F. Simmons, Howard Clinton Cross, and Joint Committee on Effect of Temperature on the Properties of Metals (page images at HathiTrust)
• The incremental permeability method for the magnetic analysis of high speed steel (Baltimore, 1928), by Julian Drenner Tebo and William Bennett Kouwenhoven (page images at HathiTrust)
• Critical ranges in pure iron-carbon alloys. ([Cleveland?, 1930), by R. H. Harrington and William P. Wood (page images at HathiTrust)
• Corrosion-resistant, heat-resistant and electrical-resistance alloys: ([Philadelphia, 1924), by American Society for Testing Materials (page images at HathiTrust)
• Principles of forging and heat treatment of steel (Burgess publishing company, 1935), by Thomas P. Hughes (page images at HathiTrust)
• High-speed steel; the development, nature, treatment, and use of high-speed steels, together with some suggestions as to the problems involved in their use (McGraw-Hill book company, 1910), by Otto Matthew Becker (page images at HathiTrust; US access only)
• The treatment of steel. : A series of circulars on heating, annealing, forging and tempering (Miller. Metcalf & Parkin, 1881), by Crescent steel co (page images at HathiTrust)
• The management of steel (W. Tweedle, 1873), by George Ede (page images at HathiTrust)
• The quenching of steels (American Society for Steel Treating, 1930), by Herbert J. French (page images at HathiTrust)
• German gun steels ... (H.M. Stationery off., 1923), by Richard Henry Greaves (page images at HathiTrust)
• Microscopic analysis of metals (C. Griffin & company, 1904), by Floris Osmond and John Edward Stead (page images at HathiTrust; US access only)
• The microscopic analysis of metals. (C. Griffin & company, limited, 1924), by Floris Osmond, L. P. Sidney, and John Edward Stead (page images at HathiTrust; US access only)
• Iron ore, pig iron and steel in 1931 (Govt. print. off., 1932), by Hubert W. Davis (page images at HathiTrust)
• Iron and steel; an introductory text-book for engineers and metallurgists (D. Van Nostrand co., 1913), by O F. Hudson and Guy D. Bengough (page images at HathiTrust)
• A treatise on steel : comprising its theory, metallurgy, properties, practical working, and use (H.C. Baird ;, 1868), by H. C. Landrin (page images at HathiTrust)
• Steels for the user. (Philosophical Library, 1956), by R. T. Rolfe (page images at HathiTrust)
• Hardenability data report, May 19, 1944. ([New York?, 1944), by Joint AISI-SAE hardenability data committee, Society of Automotive Engineers, and American Iron and Steel Institute (page images at HathiTrust)
• U. S. S. Carilloy steels. (Carnegie-Illinois steel corporation, 1938), by Carnegie-Illinois Steel Corporation (page images at HathiTrust)
• U.S.S. Carilloy steels, alloy steels for the special jobs of industry. ([Pittsburgh, 1948), by Carnegie-Illinois Steel Corporation (page images at HathiTrust)
• The surface decarburization of steel at heat-treating temperatures. ([Ann Arbor], 1931), by Walter Edwin Jominy and American Gas Association. Industrial gas research committee (page images at HathiTrust)
• Scaling of steel at heat-treating temperatures ([Ann Arbor, Mich.] : [publisher not identified], 1933., 1933), by Clair Upthegrove (page images at HathiTrust)
• ABC of iron and steel : with a directory of the iron and steel works and their products of the United States and Canada (Penton, 1919), by Adolphus Otto Backert (page images at HathiTrust)
• L'acier; aviation, automobilisme, constructions mécaniques, sanctions de la guerre. (Berger-Levrault, 1921), by C. Grard (page images at HathiTrust; US access only)
• Heat-resisting steels and alloys; a concise data book giving the high-temperature properties of commercial steels and alloys. (Van Nostrand, 1953), by C G Conway (page images at HathiTrust)
• Some considerations regarding cast iron & steel pipes (Longmans, Green and co., 1914), by John Sharp (page images at HathiTrust; US access only)
• The scientific works of C. William Siemens ... A collection of papers and discussions. (J. Murray, 1889), by Charles William Siemens and Edward Fisher Bamber (page images at HathiTrust)
• Kohlenstoffformen im eisen. (F. Enke, 1896), by Hanns v. Jüptner (page images at HathiTrust)
• Development document for interim final effluent limitations guidelines and proposed new source performance standards for the forming, finishing, and specialty steel segments of the iron and steel manufacturing point source category. (U.S. Environmental Protection Agency, Office of Water and Hazardous Materials, Effluent Guidelines Division, 1976), by United States. Environmental Protection Agency. Effluent Guidelines Division (page images at HathiTrust)
• Composition and heat treatment of steel (McGraw-Hill Book Company, 1910), by Edmund Francis Lake (page images at HathiTrust)
• Modern steels and their properties : carbon and alloy steel bars. (Bethlehem Steel Company, 1958), by Bethlehem Steel Company (page images at HathiTrust)
• The design of simple roof-trusses in wood and steel : with an introduction to the elements of graphic statics (J. Wiley & sons ;, 1902), by Malverd A. Howe (page images at HathiTrust; US access only)
• Dynamic three-dimensional finite element analysis of steel transportation structures. Technical report. (1976), by J. N. Paulson, Marshall L. Silver, and Ted Belytschko (page images at HathiTrust)
• Development of a collapsing ring bridge railing system. Final report. (1976), by C. E. Kimball, M. E. Bronstad, J. D. Michie, James A. Wentworth, and J. G. Viner (page images at HathiTrust)
• Impact resistance of non-ferrous passenger car wheels. Final report. (1978), by Larry Bowers and Jerry G. Wallingford (page images at HathiTrust)
• Crash testing sign and delineator posts (1978), by Hayes E. Ross and K. C. Walker (page images at HathiTrust)
• Steel optimization and substitution for 1980 Oldsmobile Omega X-body car. Final report. (1981), by L. F. Looby (page images at HathiTrust)
• Profiles of major suppliers to the automotive industry. Volume 1: overview. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
• Profiles of major suppliers to the automotive industry. Volume 2: iron, steel and aluminum suppliers to the automotive industry. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
• Work management manual - Panel Line, National Steel and Shipbuilding Co. (1980), by J. R. Ruecker (page images at HathiTrust; US access only)
• General work management manual for NASSCO plate shop. (1982), by G. Bradshaw, Barbara J. Faison, and B. Oakes (page images at HathiTrust; US access only)
• Cathodic protection/partial coatings versus complete coatings in tanks. (1982) (page images at HathiTrust; US access only)
• Applicability of laser welding to ship production. Volume II (1979) (page images at HathiTrust; US access only)
• An investigation of possible ways to enhance the deposition of calcite-type coatings. (1984) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
• One side welding - flux development and study of multiple arc behavior. (1974) (page images at HathiTrust; US access only)
• Work management manual - hull erection. (1981), by D. Koelling, W. Inman, D. Phillips, and J. Schauske (page images at HathiTrust; US access only)
• Work management manual - panel assembly platen area. (1980), by William S. Oakes (page images at HathiTrust; US access only)
• Powder coating for highway safety appurtenances. [Revised edition]. (1984), by N. E. Knight and Gary L. Hoffman (page images at HathiTrust)
• Metal forming systems research. (1985), by S. L. Roggendorff (page images at HathiTrust; US access only)
• Higher strength steels specially processed for high heat input welding. (1985) (page images at HathiTrust; US access only)
• DDGX program producibility studies: study no. 7B - NATVTRUSS structure phase I. (1982) (page images at HathiTrust; US access only)
• DDGX program producibility studies: study no. 7 - NAVTRUSS structure phase I. (1982), by H. L. Cheyne (page images at HathiTrust; US access only)
• Technical proposal for conduct producibility studies DDG-X. (1981) (page images at HathiTrust; US access only)
• Consumable guide electroslag welding of 4 to 24 inch thick carbon steel castings. Final report. (1986), by P. D. Thomas (page images at HathiTrust; US access only)
• Study of the mechanised manufacture and welding of reinforced shell units from rolled shell plate and tee bar segments. (1986), by S. L. Roggendorff (page images at HathiTrust; US access only)
• Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
• Evaluation of high-strength steels produced by advanced metallurgical processes. Final report (National Shipbuilding Research Program, 1987), by Newport News Shipbuilding and Dry Dock Company, American Bureau of Shipping, Ingalls Shipbuilding, United States Maritime Administration, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Vehicle impact testing of lightweight lighting standards. Final report. (1988), by Abbas Abghari, Roger L. Stoughton, and J. P. Dusel (page images at HathiTrust)
• Steel in motor vehicles - a 35-year perspective (U.S. Dept. of the Interior, Bureau of Mines, 1990), by J. Weinberg, K. L. Harris, and G. White (page images at HathiTrust)
• Vehicle crash tests of steel bridge barrier rail systems for use on secondary highways. Final report. (1993), by John R. Jewell, Doran L. Glauz, Roger L. Stoughton, J. Groza, and J. J. Folsom (page images at HathiTrust)
• Characterizing roadside hardware materials for LS-DYNA3D. Final report. (1997), by A. E. Wright and Malcolm H. Ray (page images at HathiTrust)
• Steel: a manual for steel users. (J. Wiley & sons, 1896), by William Metcalf (page images at HathiTrust)
• Iron and steel (a pocket encyclopedia) including allied industries and sciences (McGraw-Hill, 1933), by Hugh P. Tiemann (page images at HathiTrust; US access only)
• Iron and steel (A. Constable & Co., 1907), by John Henry Stansbie (page images at HathiTrust; US access only)
• Iron and steel : their sources, varieties, properties, and manufacture (Cassell, 1907), by William Henry Greenwood and A. Humboldt Sexton (page images at HathiTrust)
• Aciers, fers, fontes (H. Dunod et E. Pinat, 1918), by Alexis Jacquet (page images at HathiTrust; US access only)
• Elementary practical metallurgy : iron and steel (Longmans, Green, 1905), by Percy Longmuir (page images at HathiTrust; US access only)
• Stainless iron and steel (J. Wiley & Sons, Inc., 1931), by John Henry Gill Monypenny (page images at HathiTrust)
• Die Darstellung des Schmiedbaren Eisens in praktischer und theoretischer Beziehung. (F. Vieweg und sohn, 1875), by Hermann Wedding (page images at HathiTrust)
• Engineering steels; an exposition of the properties of steel for engineers and users to secure economy in working and efficiency of results. (D. Van Nostrand Co., 1921), by Leslie Aitchison (page images at HathiTrust)
• Steel and its heat treatment (J. Wiley & Sons, 1927), by D. K. Bullens (page images at HathiTrust)
• Steel and its heat treatment (J. Wiley & sons, inc., 1938), by D. K. Bullens (page images at HathiTrust)
• Heat treatment of soft and medium steels; theory and practice of the preliminary heat treatments designed to give maximum toughness to steels used for machine parts (McGraw-Hill book Co., 1921), by Federico Giolitti, D. G. Vernaci, and Ernest Edgar Thum (page images at HathiTrust)
• The steel foundry (McGraw-Hill book Co., 1914), by John Howe Hall (page images at HathiTrust)
• Fabrication de l'acier (Vve. Ch. Dunod, éditeur, 1905), by H. Noble (page images at HathiTrust; US access only)
• Steel treating practice (McGraw-Hill, 1929), by Ralph H. Sherry (page images at HathiTrust)
• Principles of the heat treatment of steel ([Cleveland, 1928), by United States. National Bureau of Standards (page images at HathiTrust)
• Steel thermal treatment (D. Van Nostrand Co., 1922), by John W. Urquhart (page images at HathiTrust)
• Die Darstellung des schmiedbaren Eisens in praktischer und theoretischer Beziehung (Druck und Verlag von Friedrich Vieweg und Sohn, 1884), by Hermann Wedding (page images at HathiTrust)
• Steel works analysis (Whittaker, 1907), by John Oliver Arnold and Fred Ibbotson (page images at HathiTrust; US access only)
• Pickling of iron and steel (The Penton Pub. Co., 1929), by Wallace Garretson Imhoff (page images at HathiTrust)
• Special addition agent steels (Society of Automotive Engineers, 1943), by R. B. Schenck (page images at HathiTrust)
• Lehrbuch der Eisen- und Stahlgiesserei : für den Gebrauch beim Unterricht, beim Selbststudium und in der Praxis (Wilhelm Engelmann, 1913), by Bernhard Osann (page images at HathiTrust; US access only)
• Drop forging, die sinking and machine forming of steel; modern shop practice, processes, methods, machines, tools and details... (The Norman W. Henley publishing co., 1911), by Joseph Vincent Woodworth (page images at HathiTrust)
• The heat treatment of tool steel. An illustrated description of the physical changes and properties induced in tool steel by heating and cooling operations (Longmans, Green and co., 1911), by Harry Brearley (page images at HathiTrust)
• Houghton on quenching : a treatise on the quenching of steel (E. F. Houghton & Co., 1933), by E.F. Houghton & Co (page images at HathiTrust)
• The American steel worker; a twenty-five years' experience in the selection, annealing, working, hardening and tempering of various kinds and grades of steel (The Derry-Collard company, 1906), by E. R. Markham (page images at HathiTrust; US access only)
• Hardening, tempering, annealing and forging of steel; a treatise on the practical treatment and working of high and low grade steel ... (N. W. Henley & Co., 1903), by Joseph Vincent Woodworth (page images at HathiTrust)
• Heat treatment of carbon steels (Chemical Pub. Co., Inc., 1946), by Frederick Johnson (page images at HathiTrust)
• Wire-drawing and the cold working of steel (H.F. & G. Witherby, 1925), by Alastair Thomas Adam (page images at HathiTrust; US access only)
• Steel and its heat treatment (Wiley, 1916), by D. K. Bullens (page images at HathiTrust)
• Heat-treatment of steel; a comprehensive treatise on the hardening, tempering, annealing and casehardening of various kinds of steel, including high-speed, high-carbon, alloy and low-carbon steels, together with chapters on heat-treating furnaces and on hardness testing. (The Industrial Press, 1914), by Erik Oberg (page images at HathiTrust)
• Sulphuric acid, alkalies, hydrochloric acid, iron and steel (International Textbook Co., 1902), by International Correspondence Schools (page images at HathiTrust)
• The ABC of iron and steel ; with a directory of the iron and steel works and their products of the United States and Canada. (Penton, 1915), by Adolphus Otto Backert (page images at HathiTrust)
• Vacuum melting of steel (U.S. Dept. of the Interior, Bureau of Mines, 1962), by James R. Kerr (page images at HathiTrust)
• Production of high-purity gold from zinc precipitates and steel wool cathodes by hydrometallurgical refining (U.S. Dept. of the Interior, Bureau of Mines, 1985), by G. E. McClelland, J. A. Eisele, and M. D. Wroblewski (page images at HathiTrust)
• Comparison of manganese steel with carbon steel for detachable-bit drill rods (U.S. Dept. of the Interior, Bureau of Mines, 1941), by Wing G. Agnew (page images at HathiTrust)
• Steel from urban waste (U.S. Dept. of the Interior, Bureau of Mines, 1976), by W. L. Hunter (page images at HathiTrust)
• Properties of carbon and alloy steels made with sponge iron (U.S. Dept. of the Interior, Bureau of Mines, 1953), by John L. Morning and W. W. Stephens (page images at HathiTrust)
• Carbon steel from prereduced pellets-acid practice (U.S. Bureau of Mines, 1974), by W. L. Hunter, William Albert Stickney, and Jack E. Tress (page images at HathiTrust)
• Continuous charging and preheating of prereduced iron ore (U.S. Bureau of Mines, 1975), by Jack E. Tress, William A. Stickney, and W. L. Hunter (page images at HathiTrust)
• Detinning ferrous products from urban waste for use in steelmaking (Dept. of the Interior, Bureau of Mines, 1979), by H. V. Makar, E. L. Gresh, and B. J. Wiegard (page images at HathiTrust)
• Electrolytic manganese in acid and basic electric steel foundry practice and basic steel ingot production (U.S. Dept. of the Interior, Bureau of Mines, 1947), by Frederick Sillers, J. H. Jacobs, and R. T. C. Rasmussen (page images at HathiTrust)
• Martempering of K-46 tool and die steel (Atomic Energy Commission, 1946), by G. L. Kehl, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An evaluation of variables in basic oxygen steelmaking (U.S. Dept. of Interior, Bureau of Mines, 1970), by Victor R. Spironello, William C. Hill, H. Austin Tucker, and United States Bureau of Mines (page images at HathiTrust)
• Thermal energy recovery by basic oxygen furnace offgas preheating of scrap (U.S. Bureau of Mines, 1974), by W. C. Hill, W. M. Mahan, C. B. Daellenbach, J. J. Drost, Twin Cities Metallurgy Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• Melting pyrophoric hydrogen-reduced iron powder for production of steel (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Lloyd Harold Banning and Oliver C. Fursman (page images at HathiTrust)
• Problems in substituting titanium for manganese in steel (U.S. Dept. of the Interior, Bureau of Mines, 1962), by P. G. Barnard, J. A. Rowland, and D. F. Walsh (page images at HathiTrust)
• Methods of the chemists' committee of the United States Steel Corporation for the analysis of alloy steels. ([n.p.], 1915), by United States Steel Corporation (page images at HathiTrust; US access only)
• The management of steel. (D. Appleton, 1867), by George Ede (page images at HathiTrust)
• Einführung in die Metallographie und Wärmebehandlung nebst einer Sammlung von Gefügebildern (Gebrüder Borntraeger, 1915), by Heinrich Hanemann (page images at HathiTrust; US access only)
• Management of steel. (Spon, 1901), by George Ede (page images at HathiTrust; US access only)
• Special steels; a concise treatise on the constitution, manufacture, working, heat treatment, and applications of alloy steels, for students, operators, and users of special steels (Sir I. Pitman & sons, ltd., 1923), by Thos. H. Burnham and Robert Abbott Hadfield (page images at HathiTrust; US access only)
• Iron and steel (a pocket encyclopedia) including allied industries and sciences (McGraw-Hill, 1910), by Hugh P. Tiemann (page images at HathiTrust)
• The treatment of steel; a compilation from publications of the Crescent steel company, on heating, annealing, forging, hardening and tempering and on the use of furnaces (Crucible steel company of America, 1902), by Crescent steel co, George Ede, and Crucible Steel Company of America (page images at HathiTrust; US access only)
• Einige wissenschaftliche-technische fragen der gegenwart. (J. Springer, 1879), by Charles William Siemens (page images at HathiTrust)
• Engineering steels; an exposition of the properties of steel for engineers and users to secure economy in working and efficiency of result (Macdonald & Evans, 1921), by Leslie Aitchison (page images at HathiTrust; US access only)
• Composition and heat treatment of steel (McGraw-Hill book co., 1911), by Edmund Francis Lake (page images at HathiTrust)
• Trempe, recuit, cémentation et conditions d'emploi des aciers (C. Béranger, 1911), by L. Grenet (page images at HathiTrust; US access only)
• Iron and steel (D. Van Nostrand, 1908), by John Henry Stansbie (page images at HathiTrust)
• Non-technical chats on iron and steel, and their application to modern industry (Frederick A. Stokes company, 1917), by La Verne W. Spring (page images at HathiTrust; US access only)
• Voyage métallurgique en Angleterre; ou, Recueil de mémoires sur le gisement, l'exploitation et le traitement des minérais d'étain, de cuivre, de plomb, de zinc et de fer, dans la Grande-Bretagne (Impr. de Madame Huzard, 1827), by A. Dufrénoy and L. Elie de Beaumont (page images at HathiTrust)
• The case-hardening of steel; an illustrated exposition of the changes in structure and properties induced in mild steels by cementation and allied processes (Iliffe & sons limited, 1914), by Harry Brearley (page images at HathiTrust; US access only)
• Fundamental and applied research on the physical chemistry of steel making (United States Bureau of Mines, 1930), by C. H. Herty and United States Bureau of Mines (page images at HathiTrust)
• Economic analysis of the production of ferronickel and steel from Philippine nickeliferous ores (U.S. Dept. of the Interior, Bureau of Mines, 1962), by Paul Wellman, T. J. Joyce, John H. Faber, Sidney Katell, and United States Bureau of Mines (page images at HathiTrust)
• Estimated costs of steel slag disposal (U.S. Bureau of Mines, 1970), by E. C. Baker and United States Bureau of Mines (page images at HathiTrust)
• Effect of manganese on distribution of carbon in steel (U.S. Bureau of Mines, 1929), by Bernard Marvin Larsen and United States Bureau of Mines (page images at HathiTrust)
• Deoxidation of steel using waste aluminizing dross : a feasibility study (U.S. Dept. of the Interior, Bureau of Mines ;, 1972), by H. V. Makar, P. J. Gallagher, United States Bureau of Mines, United States. Bureau of Mines. Solid Waste and Recycling Program, and College Park Metallurgy Research Center (page images at HathiTrust)
• The working of steel, annealing, heat treating, and hardening of carbon and alloy steel (McGraw-Hill book company, inc., 1921), by Fred H. Colvin and K. A. Juthe (page images at HathiTrust)
• The steel foundry (McGraw-Hill book company, inc., 1922), by John Howe Hall (page images at HathiTrust)
• The decomposition of the austenitic structure in steels (Minneapolis, 1927), by Oscar Edward Harder and Ralph Lewis Dowdell (page images at HathiTrust)
• Uranium in steel : the history and function of this element in the making of uranium steels : with analytical methods and test charts. (Standard Alloys Co., 1921), by Standard Alloys Company (page images at HathiTrust)
• Handbuch der eisen-und stahlgiesserei eine darstellung des gesamten betriebes : regeln für die anlage der giessereien und eine anleitung zur buchführung und selbst kostenrecnung enthaltend. (Friedrich Voigt, 1892), by A. Ledebur (page images at HathiTrust)
• Corrosion of steel by gases containing traces of hydrogren sulphide : effect of pressure and moisture conditions (U.S. Dept. of the Interior, Bureau of Mines, 1933), by John Michael Devine, Ludwig Schmidt, and C. J. Wilhelm (page images at HathiTrust)
• Brittle fracture of steel, 1950-1961 (Hanford Atomic Products Operation, 1961), by E. R. Appleby, U.S. Atomic Energy Commission, General Electric Company, and Handord Atomic Products Operation (page images at HathiTrust)
• Lectures on steel and its treatment (Evangelical press, 1928), by John F. Keller (page images at HathiTrust)
• The microscopic analysis of metals. (C. Griffin & Company, limited, 1913), by Floris Osmond, Leicester Philip Sidney, and John Edward Stead (page images at HathiTrust; US access only)
• Stainless iron and steel (Wiley, 1926), by John Henry Gill Monypenny (page images at HathiTrust)
• Iron and steel manufacture : series of papers on the manufacture and properties of iron and steel, with reports on iron and steel in the Paris exhibition of 1867, reviews of the state and progress of the manufacture during the years 1867 & 1868, and descriptions of many of the principal iron and steel works in Great Britain, the continent of Europe, and the United States ; With numerous engravings. ([s.n., 1868), by Ferdinand Kohn (page images at HathiTrust)
• Steel for the manufacture of dies (E.J. Davey, 1880), by W. C. Roberts-Austen (page images at HathiTrust)
• Hardening, tempering, annealing and forging of steel, including heat treatment of modern alloy steels; a complete treatise on the practical treatment and working of high and low grade steel (Norman W. Henley, 1919), by Joseph V. Woodworth (page images at HathiTrust)
• The treatment of steel. A series of circulars on heating, annealing, forging and tempering (Miller, Metcalf & Parkin, 1884), by Crescent Steel Co and George Ede (page images at HathiTrust)
• Steel for ordnance purposes. March, 1913. (Govt. Print. Off., 1913), by United States. Navy Dept. Bureau of Ordnance (page images at HathiTrust)
• Eisen und stahl, ihre eigenschaften und behandlung, praktisches hilfs- und handbuch für hüttenmänner, schmiede, schlosser und eisenhändler, nach eigener erfahrung und mit benutzung der einschlägigen fachlitteratur (Voigt, 1899), by Rudolph Schoppmann (page images at HathiTrust; US access only)
• The A B C of iron and steel; with a directory of the iron and steel works and their products of the United States and Canada. (The Penton Pub. Co., 1921), by Adolphus Otto Backert (page images at HathiTrust)
• Eisen und Stahl in ihrer Anwendung für bauliche und gewerbliche Zwecke : ein Lehr- und Handbüchlein für Alle, die sich des Eisens bedienen (S. Fischer, 1890), by A. Ledebur (page images at HathiTrust)
• The working of steel, annealing, heat treating, and hardening of carbon and alloy steel (McGraw-Hill Book Company, Inc., 1922), by Fred H. Colvin and K. A. Juthe (page images at HathiTrust)
• Rolling sheet steel; practical hints & suggestions. (Brown, 1897), by George C. Brown (page images at HathiTrust)
• Das härten des stahles in theorie und praxis (Felix, 1881), by Fridolin Reiser (page images at HathiTrust)
• The metallurgy of iron and steel : being one of a series of treatises on metallurgy written by associates of the Royal School of Mines (Charles Griffin, 1895), by T. Henry Turner and W. C. Roberts-Austen (page images at HathiTrust)
• Steel as a gun metal (Artillery School Press, 1892), by Adam Slaker (page images at HathiTrust)
• E B B W Vale soft steels from June 12th to [September 28th] 1889. ([n.p., 1889), by E B B W Vale iron works (page images at HathiTrust)
• Voyage métallurgique en Angleterre, ou Recueil de mémoires sur le gisement, l'exploitation et le traitement des minerais de fer, étain, plomb, cuivre et zinc, dans la Grande-Bretagne (Bachelier, 1837), by A. Dufrénoy, Léon Coste, Auguste Perdonnet, and Léonce Elie de Beaumont (page images at HathiTrust)
• A treatise on the progressive improvement & present state of the manufactures in metal. (Printed for Longman, Brown, Green & Longmans, 1853), by John Holland and Robert Hunt (page images at HathiTrust)
• The ABC of iron and steel (The Penton publishing company, 1919), by Adolphus Otto Backert (page images at HathiTrust)
• The management of steel. (William Tweedie, 1866), by George Ede (page images at HathiTrust)
• On the effect of time and temperature on the strength of steel and iron. ([Montreal, 1902), by E. G. Coker (page images at HathiTrust)
• The physico-chemical properties of steel. (C. Griffin & company, limited, 1920), by C. A. Edwards (page images at HathiTrust; US access only)
• The burning, overheating, and restoring of nickel steel. ([n.p., 1906), by George Booker Waterhouse (page images at HathiTrust; US access only)
• Beziehungen zwischen den mechanischen Eigenschaften, der chemischen Zusammensetzung, dem Gefüge und der Vorbehandlung von Eisen und Stahl ... (Felix, 1919), by Hanns v. Jüptner (page images at HathiTrust; US access only)
• Seventy-five years of progress in iron and steel; manufacture of coke, pig iron, and steel ingots. (Published for the Seeley W. Mundt Fund, by the American Institute of Mining and Metallurgical Engineers, 1948), by Clarence David King (page images at HathiTrust)
• The little handbook; a buyer's guide for stampings and tank heads, with certain useful mathematical tables and formulae. ([The Commercial Shearing & Stamping Co., 1950), by Commercial Shearing & Stamping Co (page images at HathiTrust)
• Review and text of the American standard specifications for steel, adopted in August, 1901, by the American section of the International association for testing materials. (The Chemical Publishing Company, 1902), by Albert L. Colby (page images at HathiTrust)
• The ingot phase of steel production (Press of Schneidereith & Sons, 1942), by Emil Gathmann (page images at HathiTrust)
• The mineral industry of the British Empire and foreign countries. Statistics, 1919-1921. Iron and steel. (H.M. Stationery Off., 1923), by Imperial Institute (Great Britain) (page images at HathiTrust)
• The mineral industry of the British Empire and foreign countries. Statistics, 1920-1922. Iron and steel. (H. M. Stationery Off., 1924), by Imperial Institute (Great Britain) (page images at HathiTrust)
• Steel manufacture in the United States ([n.p., n.p., 1901), by Andrew Carnegie (page images at HathiTrust; US access only)
• Iron and steel : principles of manufacture, structure, composition and treatment ... (The Industrial press, 1909), by Erik Oberg and Edward Russell Markham (page images at HathiTrust; US access only)
• Structural properties of "Steelox" constructions for walls, partitions, floors, and roofs sponsored by Steel Buildings, Inc. (U.S. Dept. of Commerce, National Bureau of Standards :, 1939), by Herbert L. Whittemore, Vincent B. Phelan, Ambrose H. Stang, United States. National Bureau of Standards, and Inc Steel Buildings (page images at HathiTrust)
• Structural properties of "Wheeling long-span steel floor" construction sponsored by the Wheeling Corrugating Company (U.S. Dept. of Commerce, National Bureau of Standards :, 1939), by Herbert L. Whittemore, Vincent B. Phelan, Ambrose H. Stang, United States. National Bureau of Standards, and Wheeling Corrugating Company (page images at HathiTrust)
• Structural properties of "Bender steel home" wall construction sponsored by the Bender Body Company (U.S. Dept. of Commerce, National Bureau of Standards :, 1939), by Herbert L. Whittemore, Vincent B. Phelan, Ambrose H. Stang, United States. National Bureau of Standards, and Bender Body Company (page images at HathiTrust)
• Surface treatment of steel prior to painting (U.S. Dept. of Commerce, National Bureau of Standards :, 1940), by Rolla E. Pollard, Wilbur C. Porter, and United States. National Bureau of Standards (page images at HathiTrust)
• Initial temperature and mass effects in quenching (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Herbert J. French, Otto Zwicker Klopsch, and United States. National Bureau of Standards (page images at HathiTrust)
• Flow in a low-carbon steel at various temperatures (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Herbert J. French, William Armistead Tucker, and United States. National Bureau of Standards (page images at HathiTrust)
• Influence of phosphorus upon the microstructure and hardness of low-carbon, open-hearth steels (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by Edward Center Groesbeck and United States. National Bureau of Standards (page images at HathiTrust)
• Manufacture and properties of steel plates containing zirconium and other elements (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by G. K. Burgess, Howard Brabrook Knowles, G. E. F. Lundell, Raymond West Woodward, and United States. National Bureau of Standards (page images at HathiTrust)
• Endurance and other properties of rail steel (U.S. Dept. of Commerce, Bureau of Standards :, 1927), by John Ripley Freeman, Ralph Lewis Dowdell, William James Berry, and United States. National Bureau of Standards (page images at HathiTrust)
• Origin of quenching cracks (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Howard Scott and United States. National Bureau of Standards (page images at HathiTrust)
• Density of hot-rolled and heat-treated carbon steels (U.S. Dept. of Commerce, Bureau of Standards :, 1927), by Howard Clinton Cross, Edith Esther Hill, and United States. National Bureau of Standards (page images at HathiTrust)
• Permanent-magnet steels. (U.S. Dept. of Commerce, Bureau of Standards :, 1927), by Raymond Laraway Sanford and United States. National Bureau of Standards (page images at HathiTrust)
• Steel axles and forgings. (Cambria steel co.], 1903), by Cambria steel company (page images at HathiTrust)
• Condensed suggestions for steel workers. (Crucible steel company of America, 1902), by Crucible steel company of America (page images at HathiTrust)
• Energy necessary to shear steel at high temperatures (Columbia, Mo., 1920), by Guy Doric Newton (page images at HathiTrust)
• The treatment of steel. A series of circulars on heating, annealing, forging and tempering (Miller, Metcalf & Parkin, 1881), by Crescent steel co (page images at HathiTrust)
• Case carbonizing. (Driver-Harris company, 1920), by Harrison Driver-Harris company (page images at HathiTrust)
• Condensed suggestions for steel workers. (H. O. Shepard & co., printers, 1888), by Crescent steel co (page images at HathiTrust)
• A study of the relation between the Brinell hardness and the grain size of annealed carbon steels (Govt. print. off., 1920), by Henry S. Rawdon, Emilio Jimeno Gil, and United States. Bureau of standards. Scientific papers (page images at HathiTrust)
• American blacksmithing, toolsmiths' and steelworkers' manual ... (Printed by F.J. Drake & Co., for Sears, Roebuck & Company, 1911), by John Gustaf Holmström and Henry Holford (page images at HathiTrust)
• Burnishing and ductilizing steel. ([Philadelphia, 1881), by Jacob Reese (page images at HathiTrust)
• Condensed suggestions for steel workers ... (Foster, Roe & Crone, printers, 1890), by Crescent steel co (page images at HathiTrust)
• The scientific steel worker; a practical manual for steel workers and blacksmiths. ([Struthers? Ohio], 1903), by Ozro A. Westover (page images at HathiTrust)
• Scientific methods to tempering steel; compounds for welding and restoring burnt steel, compounds for hardening steel, case hardening, hardening solutions for chills, for ball bearings, compound for welding copper (Calvert-Calhoun printing co., 1917), by W. E. Everitt (page images at HathiTrust)
• "Grades of steel," ([Buffalo? N.Y., 1910), by H. P. Parrock (page images at HathiTrust)
• The treatment of steel; a compilation from publications of the Crescent steel company, on heating, annealing, forging, hardening and tempering and on the use of furnaces; also a chapter on hardening and tempering from a work (Crucible steel company of America, 1902), by Crescent steel co, George Ede, and Crucible Steel Company of America (page images at HathiTrust)
• Kaliberheft des Walz- und Schmiede-Eisens zur Benutzung bei den Uebungen im Entwerfen von Eisen-Konstruktionen an der Königlichen Technischen Hochschule in Berlin. (Denter & Nicolas, 1880), by Technische Hochschule Berlin (page images at HathiTrust)
• Result of an experimental inquiry into the tensile strength and other properties of various kinds of wrought iron and steel. (Hamilton, Adams, & co., 1866), by David Kirkaldy (page images at HathiTrust)
• The American steel worker; a twenty-five years' experience in the selection, annealing, working, hardening and tempering of various kinds and grades of steel (New York, Derry-Collard, 1903), by Edward Russell Markham (page images at HathiTrust)
• The 20th century toolsmith and steel worker; a complete, practical, and scientific book, written by a thorough expert mechanic and steelworker, especially in the interests of blacksmiths, toolsmiths, toolmakers, and all mechanics connected directly on indirectly with the use, repair, and manufacture of steel into tools. (F.J. Drake & co., 1907), by Henry Holford (page images at HathiTrust; US access only)
• The 20th century toolsmith and steelworker; a complete, practical, and scientific book (F. J. Drake & co., 1908), by Henry Holford (page images at HathiTrust)
• Heat-treating chart-showing critical temperatures for carbon steel. (Keuffel & Esser co., 1917), by V. S. Yarnall (page images at HathiTrust)
• Heat-treatment of steel (The Industrial press; [etc., etc.], 1914), by Erik Oberg, New York Industrial press, and Machinery (page images at HathiTrust)
• Non-technical chats on iron and steel, and their application to modern industry (Frederick A. Stokes company, 1917), by La Verne Ward Spring (page images at HathiTrust)
• Steel and its heat treatment (John Wiley & sons, inc.; [etc., etc.], 1918), by D. K. Bullens (page images at HathiTrust)
• Quenching media; how the Houghton research staff made uniformity possible with oil hardening. (E.F. Houghton & Company, 1922), by E.F. Houghton & Co (page images at HathiTrust)
• Les défauts physiques de l'acier en pièces forgées (H. Dunod & E. Pinat, 1918), by A. Portevin (page images at HathiTrust; US access only)
• Steel, its varieties, properties, and manufacture; with numerous engravings and diagrams (Cassell and company, limited, 1907), by William Henry Greenwood and A. Humboldt Sexton (page images at HathiTrust; US access only)
• Steels and alloys for special purposes. (Crucible Steel Co. of America, 1912), by Crucible Steel Company of America (page images at HathiTrust)
• Homogeneity characterization of NBS spectrometric standards II: cartridge brass and low-alloy steel (For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1965), by Harvey Yakowitz (page images at HathiTrust)
• Porcelain-on-steel cooking ware from Spain : determination of the Commission in investigation no. 701-TA-279 (preliminary) under the Tariff act of 1930, together with the information obtained in the investigation, determination of the Commission in investigation no. 731-TA-336 (preliminary) under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1986), by United States International Trade Commission, Maria Papadakis, Ann Reed, and Elizabeth Henning (page images at HathiTrust)
• Porcelain-on-steel cooking ware : report to the President on investigation no.TA-203-10 under section 203 of the Trade act of 1974 (The Commission, 1981), by United States International Trade Commission, Debra Baker, John W. DePauw, and Daniel Leahy (page images at HathiTrust)
• Evaluation of CBS 600 carburized steel as a gear material (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Dennis P. Townsend, Erwin V. Zaretsky, Richard J. Parker, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Effect of humidity and a wettability additive on polyphenyl ether boundary lubrication of steel in air and nitrogen to 350 ̊C (National Aeronautics and Space Administration ;, 1970), by William R. Jones, William F. Hady, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Fatigue lives at 600 ̊F of 120-millimeter-bore ball bearings of AISI M-50, AISI M-1, and WB-49 steels (National Aeronautics and Space Administration ;, 1971), by Eric N. Bamberger, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Friction and wear of steels in air and vacuum (National Aeronautics and Space Administration ;, 1970), by Roamer Predmore, Charles L. Staugaitis, Jane Jellison, United States National Aeronautics and Space Administration, and Goddard Space Flight Center (page images at HathiTrust)
• NASA TN D-4894 (National Aeronautics and Space Administration ;, 1968), by W. V. Medenica, George C. Marshall Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4565 (National Aeronautics and Space Administration ;, 1968), by Donald W. Wisander, Robert L. Johnson, Lawrence P. Ludwig, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Results of an experimental inquiry into the tensile strength and other properties of various kinds of wrought-iron and steel (Printed for and sold by the author, 1866), by David Kirkaldy (page images at HathiTrust)
• Ueber die Festigkeits-Versuche mit Eisen und Stahl. (Berlin, 1870), by A. Wöhler (page images at HathiTrust)
• The management of steel. (D. Appleton & co., 1864), by George Ede (page images at HathiTrust)
• Hardening and tempering steel; a workshop guide to the heat treatment of all steels, including high-speed (Cassell and company, ltd., 1911), by Bernard Edward Jones (page images at HathiTrust; US access only)
• Heat-treatment of steel : a comprehensive treatise on the hardening, tempering, annealing and casehardening of various kinds of steel, including high-speed, high-carbon, alloy and low-carbon steels : together with chapters on heat-treating furnaces and on hardness testing (Industrial Press, 1915), by Erik Oberg (page images at HathiTrust)
• Das schmiedbare Eisen, Konstitution und Eigenschaften (J. Springer, 1920), by Paul Oberhoffer (page images at HathiTrust; US access only)
• ABC of iron and steel. (Penton Pub. Co., 1915), by Dan Reebel and Adolphus Otto Backert (page images at HathiTrust; US access only)
• Progress in use of 1-inch steel in the Tristate lead and zinc district (U.S. Dept. of Commerce, Bureau of Mines, 1926), by C. R. Forbes (page images at HathiTrust)
• The use of steel for constructive purposes : methods of working, applying and testing plates and bars (D. Van Nostrand co., 1891), by Joseph Barba (page images at HathiTrust)
• The ABC of iron and steel : with a directory of the iron and steel works and their products of the United States and Canada (Penton Publishing Company, 1921), by A. O. Backert (page images at HathiTrust)
• A few illustrations of work done with the corrugated bar : Some information about corrugated bars and simple formulae and tables for use in designing. (Expanded Metal and Corrugated Bar Co., 1907), by St. Louis Expanded Metal and Corrugated Bar Company (page images at HathiTrust)
• Konstruktionsstahl; ein praktisches Handbuch über die festigkeits-eigenschaften von Stahl und Eisen. Auf Grund praktischen Erfahrungen bearbeitet zum Gebrauch in Werkstätten, für Hüttenleute, Ingenieure, Abnahmebeamte usw. (Craz & Gerlach (J. Stettner), 1904), by Otto Thallner (page images at HathiTrust; US access only)
• Results of an experimental inquiry into the comparative tensile strength and other properties of various kinds of wrought-iron and steel (Hamilton, Adams, & Co. :, 1862), by David Kirkaldy (page images at HathiTrust)
• Pencoyd iron works. (The Company, 1897), by A. & P. Roberts Company (page images at HathiTrust)
• Book of weights (Issued by the Peerless Drawn Steel Co., 1918), by Peerless Drawn Steel Co (page images at HathiTrust)
• Steel: a manual for steel-users. (J. Wiley & Sons, 1905), by William Metcalf (page images at HathiTrust)
• Steel and its treatment (E. F. Houghton & co., 1918), by E.F. Houghton and Company (page images at HathiTrust)
• Report on cold-rolled iron and steel as manufactured by Jones & Laughlins, American iron works, Pittsburgh (Printed by Stevenson, Foster & co., 1878), by Robert Henry Thurston and Jones & Laughlin Steel Company (page images at HathiTrust)
• Lehrbuch der eisen- und stahlgiesserei, verfasst für den gebrauch beim unterricht, beim selbststudium und in der praxis (W. Engelmann, 1920), by Bernhard Osann (page images at HathiTrust; US access only)
• Manuel complet du travail des métaux; fer et acier manufacturés : traduit de l'anglais du docteur Lardner (Roret, 1835), by John Holland and A. D. Vergnaud (page images at HathiTrust)
• A practical guide for puddling iron and steel (H. C. Baird, 1868), by Éd Urbin, A. A. Fesquet, and A. Brüll (page images at HathiTrust)
• Cambria steel bars and specialties; merchant steel and bar products. automobiles and motor truck steel, cold-rolled and cold-drawn steel, machinery steel soft, steel, spring steel, agricultural steel and shapes, plow steel, etc. (Cambria Steel Company, 1912), by Cambria Steel Co (page images at HathiTrust)
• Iron and steel manufacture; a text-book for beginners (Macmillan and co., 1907), by Arthur H. Hiorns (page images at HathiTrust)
• Forgeage et laminage (J.-B. Baillière et fils, 1922), by Léon Geuze (page images at HathiTrust; US access only)
• Die bearbeitung der metalle in maschinenfabriken durch giessen ; schmieden schweissen, härten und tempern... ([s.n.], 1913), by Ernst Preger (page images at HathiTrust; US access only)
• Steel and its treatment ([E. Stern & co.], 1914), by Houghton (E.F.) and Company (page images at HathiTrust)
• Das härten des stahles in theorie und praxis... ([s.n.], 1913), by Fridolin Reiser (page images at HathiTrust; US access only)
• The treatment of steel : a series of citculars on heating, annealing, forging and tempering (Metcalf & Parking, 1884), by Pittsburgh Crescent Steel Company and George Ede (page images at HathiTrust)
• Die spezialstähle in theorie und praxis. ([s.n.], 1909), by Walter Giesen (page images at HathiTrust; US access only)
• Lehrbuch der Eisen- und Stahlgiesserei, für den Gebrauch beim Unterricht, beim Selbstudium und in der Praxis (W. Engelmann, 1912), by Bernhard Osann (page images at HathiTrust; US access only)
• The influence of divorcing annealing on the mechanical properties of low-carbon steel (American Institute of Mining Engineers, 1912), by Henry Marion Howe and Arthur G. Levy (page images at HathiTrust)
• Why does lag increase with the temperature from which cooling starts? (American Institute of Mining Engineers, 1913), by Henry Marion Howe (page images at HathiTrust)
• The progress of the metallurgy of iron and steel (American Institute of Mining Engineering, 1914), by Robert Abbott Hadfield (page images at HathiTrust)
• Experimental production of alloy steels (Govt. print. off., 1922), by H. W. Gillett and E. L. Mack (page images at HathiTrust)
• Production of high-purity gold from zinc precipitates and steel wool cathodes by hydrometallurgical refining (U.S. Dept. of the Interior, Bureau of Mines, 1985), by G. E. McClelland, J. A. Eisele, and M. D. Wroblewski (page images at HathiTrust)
• The construction of concrete-steel subways in Chicago (1912), by Philip Raymond Elfstrom (page images at HathiTrust; US access only)
• Tests of bond between concrete and steel (1907), by Marshall Childs Stookey (page images at HathiTrust; US access only)
• Tests on bond between concrete and steel (1906), by Todd Kirk (page images at HathiTrust; US access only)
• Hardening, tempering, annealing and forging of steel; a treatise on the practical treatment and working of high and low grade steel... (The N. W. Henley pyublishing co., 1911), by Joseph Vincent Woodworth (page images at HathiTrust; US access only)
• Steam, steel and electricity (Saalfield, 1903), by James W. Steele (page images at HathiTrust)
• Materials of engineering (John Wiley, 1901), by Robert Henry Thurston (page images at HathiTrust)
• Steel axles and similar forgings for steam and electric railway service : Standard axle designs and specifications. (Carnegie Steel Co., 1919), by Carnegie Steel Company (page images at HathiTrust)
• A systematic investigation of the correlation of the magnetic and mechanical properties of steel. ([Chicago, 1919), by N. J. Gebert (page images at HathiTrust)
• Manual of information and tables appertaining to the use of structural steel as manufactured by the Passaic Rolling Mill Co. (s.n.], 1901), by Geo H. Blakeley (page images at HathiTrust)
• Annual report for the fiscal year ended Dec. 31, 1906-09, 1911-21. ([N.Y.], 1906), by Lackawanna Steel Co. and subsidiary companies (page images at HathiTrust)
• Bar iron and rerolled steel manufactured at our Seattle plant. (Colonial Press], 1918), by Pacific Coast Steel Co (page images at HathiTrust)
• Notes on iron and iron ores (Dawson ;, 1870), by Thomas Sterry Hunt and Geological Survey of Canada (page images at HathiTrust)
• The elastic response of buried cylinders : critical literature review and pilot study (Waterways Experiment Station, 1966), by Gayle E. Albritton, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Static tests of reinforced concrete beams : report 1 : development of iterative analysis procedure and tests of beams reinforced with steel, aluminum, and fiber glass, with and without helical compressive reinforcement (Waterways Experiment Station, 1968), by H. G. Geymayer, Waterways Experiment Station (U.S.), and United States. Department of the Army. Office of Research and Development (page images at HathiTrust)
• Engineering tests of experimental T7 magnesium and modified standard steel airplane landing mats. (Waterways Experiment Station, 1957), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Engineering tests of T10 steel airplane landing mat (modified M8), dust-alleviation type. (Waterways Experiment Station, 1959), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Foundation investigations, NASA Mississippi Test Facility : report 1 : static and vibratory load testing of foundation piles at test stand S-IC (Waterways Experiment Station, 1969), by John B. Stevens (page images at HathiTrust)
• The injurious effect of a blue heat on steel and iron : reprinted from the proceedings of the Institution of Civil Engineers, London (G.P.O., 1887), by C. E. Stromeyer and Institution of Civil Engineers (Great Britain) (page images at HathiTrust)
• Naval professional papers. (Govt. print. off., 1883) (page images at HathiTrust)
• Cambria steel bars and "Gautier" specialties; merchant steel and bar products. automobiles and motor truck steel, cold-rolled and cold-drawn steel, machinery steel soft, steel, spring steel, agricultural steel and shapes, plow steel, etc. (Cambria Steel Company, 1917), by Cambria Steel Co (page images at HathiTrust)
• Steel for ship-building (Wash., 1883), by United States Bureau of Naval Personnel and United States Navy Department Bureau of Navigation (page images at HathiTrust)
• How to buy iron and steel materials : a few suggestions to those interested in the purchasing of iron and steel ... (Export Dept., Hidalgo Steel Co., 1918), by Hidalgo Steel Company. Export Department (page images at HathiTrust)
• The management of steel (New York : D. Appleton & Co., 1874., 1874), by George Ede (page images at HathiTrust)
• Steel axles for steam, electric, surface, elevated, subway and interurban car and locomotive equipment, industrial and nine axles, forgings, rolled products, etc. ([Cincinnati?, 1919), by Cincinnati Pollak Steel Company (page images at HathiTrust)
• Failure of footing-supported buried steel arches loaded statically (Waterways Experiment Station, 1970), by John F. Munn, Thomas E. Kennedy, Gary L. Carre, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Model tests of steel tunnel supports (Waterways Experiment Station, 1970), by Glenn S. Orenstein and H. G. Geymayer (page images at HathiTrust)
• Elastic response of shock-isolated cylinders buried in a dense, dry sand (Waterways Experiment Station, 1969), by David C. Foster and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Dynamic response of a small shear wall structure (Waterways Experiment Station, 1969), by Jack D. Bakos (page images at HathiTrust)
• Steel fibrous concrete for airport pavement applications : final report (Waterways Experiment Station, 1974), by Frazier Parker (page images at HathiTrust)
• Effect of horizontal reinforcement on stability of earth masses (U.S. Waterways Experiment Station, 1976), by Mosaid M. Al-Hussaini, Edward B. Perry, and United States Army Corps of Engineers (page images at HathiTrust; US access only)
• Les lois de Wo hler. (Paris, 1919), by Charles Fre mont (page images at HathiTrust; US access only)
• Steels and alloys for special purposes. (The Company, 1919), by Crucible Steel Company of America (page images at HathiTrust)
• Iron and steel exhibits. (Washington, 1880), by Daniel J. Morrell (page images at HathiTrust)
• Contraction as a friend in need .. ([Seattle?], 1938), by Joseph Holt (page images at HathiTrust; US access only)
• A study of cases in steel made at different temperatures of carburization (1919), by Charles G. Callard (page images at HathiTrust; US access only)
• A study of case hardening compounds & their relative carbonizing ability (1916), by James M. Johnson and Arthur Herman Atzenhoffer (page images at HathiTrust; US access only)
• The determination of the percent of carbon in steel by means of the microscope (1919), by Henry Eveleth Publow (page images at HathiTrust; US access only)
• The properties of semi-steel (1896), by Joseph H. Steele (page images at HathiTrust)
• An investigation of the art of rustproofing of iron & steel (1917), by Hubert L. Waterbury (page images at HathiTrust; US access only)
• Surface treatment for corrosion protection of steel members for low-cost housing construction. (U.S. Dept. of Commerce, National Bureau of Standards, 1937), by United States. National Bureau of Standards (page images at HathiTrust)
• Interfacial thermal and electrical resistance between stationary mercury and steel (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1952., 1952), by Charles F. Bonilla, S. J. Wang, U.S. Atomic Energy Commission. New York Operations Office, and Columbia University (page images at HathiTrust)
• Friction of solid films on steel at high sliding velocities (National Advisory Committee for Aeronautics, 1948), by Robert L. Johnson, E. E. Bisson, Douglas Godfrey, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• ... The manufacture of iron and steel ... (n. pub., 1925), by Frank T. Sisco (page images at HathiTrust)
• Coatings for the protection of low carbon steel at elevated temperatures (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1952., 1952), by J. H. Handwerk, Thomas Newkirk MacVay, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Theoretical and practical aspects of vacuum induction melting of high-strength steels. (United States Department of Commerce, Office of Technical Services, 1960), by Philip S. Schaffer (page images at HathiTrust)
• Effects of alloying elements and the tensile and hardness properties of carbon and alloy steel (Heppenstall Company, 1948), by Heppenstall Company. Metallurgical Department (page images at HathiTrust; US access only)
• [Catalog] (The Stevens metal products company, 1941), by Stevens Metal Products Company (page images at HathiTrust; US access only)
• Cold finished bar steels : annual capacity 325,000 tons (Bliss & Laughlin, 1948), by Inc Bliss & Laughlin (page images at HathiTrust; US access only)
• Principles of forging and heat treatment of steel, (Burgess Pub. Co., 1939), by Thomas P. Hughes (page images at HathiTrust; US access only)
• The use of spiegeleisen in steel manufacture (U.S. Dept. of Interior, Bureau of Mines,], 1919), by Henry D. Hibbard and United States Bureau of Mines (page images at HathiTrust)
• The embrittling action of sodium hydroxide on soft steel (University of Illinois, 1917), by Samuel Wilson Parr (page images at HathiTrust)
• The Making of steel. (American Iron and Steel Institute, 1950), by American Iron and Steel Institute (page images at HathiTrust; US access only)
• Steel sheet piling, tables and data on the properties and uses of sections. (Carnegie steel co., 1912), by Carnegie Steel Company (page images at HathiTrust)
• Future application trends for titanium and steel in military aircraft (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by W. Stuart Lyman, Fred L. Bagby, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Milling of high-strength steels in the hardness range of 330 to 560 brinell (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by C. T. Olofson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Welding of high-strength steels for aircraft and missile applications (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by Herbert W. Mishler, P. J. Rieppel, R. E. Monroe, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Vacuum degassing in the production of premium-quality steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1964., 1964), by P. J. O'Reilly and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Some observations on the electron-microscopic fractography of embrittled sheets (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1964., 1964), by W. R. Warke and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Thesis : carbon determinations in iron and steel (1892), by H. F. Van Deventer (page images at HathiTrust)
• Steel aircraft materials and applications. (Carnegie-Illinois steel corporation, 1941), by Carnegie-Illinois Steel Corporation (page images at HathiTrust; US access only)
• Steel. ([New York, 1945), by Pierce Merrill Lynch (page images at HathiTrust; US access only)
• Steel works analysis (Pitman, 1919), by John Oliver Arnold and Fred Ibbotson (page images at HathiTrust; US access only)
• Heat treating, its principles and applications (The Penton publishing co., 1924), by Charles Herman Fulton, James H. Knapp, and Hugh M. Henton (page images at HathiTrust)
• Continuous identification marking of iron and steel products : military standard. (U.S. G.P.O., 1957), by United States. Dept. of Defense (page images at HathiTrust)
• Elementary foundry technology, with special reference to gray iron and steel. (McGraw-Hill book company, inc., 1928), by Lawrence A. Hartley (page images at HathiTrust)
• Comparative analysis of steel & concrete in structures (1925), by Don F. Redick (page images at HathiTrust; US access only)
• Grain growth in low carbon steel within the critical range (1927), by Henry Eveleth Publow (page images at HathiTrust; US access only)
• A study of the grain growth of a low carbon steel (1926), by James W. Percy (page images at HathiTrust; US access only)
• Grain growth & refinement in hypoeutectoid steels (1928), by Leo J. Waldron (page images at HathiTrust; US access only)
• Basic facts in the steel wage case. (New York, New York : Steel Companies in the Wage Case, 1952., 1952) (page images at HathiTrust; US access only)
• The structure and properties of mild steel. (American Society of Metals, 1953), by Charles Alfred Edwards (page images at HathiTrust; US access only)
• Investment casting of SAE 1040 steel : (methods used in preparation of fatigue life and decarburization test specimens) (Washington : U.S. Department of Commerce, Office of Technical Services, [1953], 1953), by Wade H. Shafer (page images at HathiTrust; US access only)
• Forming, finishing, and specialty steel segments of the iron and steel manufacturing point source category (U.S. Environmental Protection Agency, Office of Water and Hazardous Materials, Effluent Guidelines Division, 1976), by United States. Environmental Protection Agency. Effluent Guidelines Division (page images at HathiTrust)
• Intermittent stressing and heating tests of aircraft structural metals (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957., 1957), by John Salvaggi, United States. Air Force. Air Research and Development Command, Wright Air Development Center, Aerospace Medical Laboratory (U.S.), and Cornell Aeronautical Laboratory (page images at HathiTrust)
• Frictional damping and resonant vibration characteristics of an axial slip lap joint (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1954, 1954), by James H. Klumpp, Benjamin J. Lazan, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and University of Minnesota (page images at HathiTrust)
• The ingot phase of steel production (Catonsville, Md., 1937), by Emil Gathmann (page images at HathiTrust; US access only)
• Roll-turning for sections in steel and iron : working drawings for rails, sleepers, girders, bulbs, ties, angles, &c. : also blooming and cogging, for plates and billets (E. & F.N Spon ;, 1894), by Adam Spencer (page images at HathiTrust)
• USS cor-ten high-strength, low-alloy steel. (The Corporation, 1953), by United States Steel Corporation (page images at HathiTrust; US access only)
• Acoustic emission and prefracture processes in high-strength steels (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1968., 1968), by G. S. Baker, Air Force Materials Laboratory (U.S.), and Aerojet-General Corporation (page images at HathiTrust)
• The effect of cadmium plating on aircraft steels under stress concentration at elevated temperatures (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by E. M. Kennedy and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Werkstofftagung Berlin 1927; stahl und eisen als werkstoff. Gesammelte vorträge der gruppe stahl und eisen (Verlag Stahleisen m.b.h., 1928), by Verein Deutscher Eisenhüttenleute (page images at HathiTrust; US access only)
• Free and forced vibrations of an infinitely long cylindrical shell in an infinite acoustic medium. (Defense Technical Information Center, 1952), by M. L. Baron, H. H. Bleich, and Columbia Univ. New York (page images at HathiTrust; US access only)
• Non-technical chats on iron and steel, and their application to modern industry, by La Verne W. Spring (Gutenberg ebook)
• Steel : a manual for steel users, by William Metcalf (Gutenberg ebook)
• The Beginnings of Cheap Steel, by Philip W. Bishop (Gutenberg ebook)
• The Working of Steel: Annealing, Heat Treating and Hardening of Carbon and Alloy Steel, by Fred H. Colvin and K. A. Juthe (Gutenberg ebook)

More items available under broader and related terms at left.