The Online Books Page

Plates (Engineering)

Here are entered works on plates as engineering structures. Works on shells as engineering structures are entered under Shells (Engineering). Works on the mathematical theories of elasticity in plates and shells are entered under Elastic plates and shells.

See also what's at your library, or elsewhere.

• Elastic plates and shells
• Structural analysis (Engineering)

• Shells (Engineering)

• Slabs

• Disks (Mechanics)
• Panels
• Structural plates

• Skew Plates and Structures (New York: Macmillan, 1963), by L. S. D. Morley (page images at HathiTrust)

• Properties of Composite Sections for Bridges and Buildings (ca. 1963), by Bethlehem Steel Company (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Candela, the Shell Builder (New York, Reinhold Pub. Corp., c1963), by Colin Faber, contrib. by O. N. Arup (page images at HathiTrust)
• Nonlinear Theories for Thin Shells (Cambridge, MA: Division of Engineering and Applied Physics, Harvard University, 1961), by J. Lyell Sanders
  • page images at HathiTrust
  • PDF at dtic.mil

• Coatings for High-Temperature Structural Materials: Trends and Opportunities (1996), by National Research Council National Materials Advisory Board (page images with commentary at NAP)

• Seismic Design and Evaluation Guidelines for the Department of Energy High-Level Waste Storage Tanks and Appurtenances (1995), by K. K. Bandyopadhyay, A. Cornell, C. Constantino, R. Kennedy, C. Miller, and A. S. Veletsos (PDF at osti.gov)

• Circular Concrete Tanks Without Prestressing (Chicago: Portland Cement Association, ca. 1943), by Portland Cement Association (page images at HathiTrust)

• Septage Management (Cincinnati: Municipal Environmental Research Laboratory, Office of Research and Development, Environmental Protection Agency, 1980), by Joseph W. Rezek and Ivan A. Cooper (page images at HathiTrust)

• The Hanford Tanks: Environmental Impacts and Policy Choices (1996), by National Research Council Board on Radioactive Waste Management (page images with commentary at NAP)

• Bioprocessing Pipelines: Rheology and Analysis (2006), by James Freeman Steffe and Christopher R. Daubert (PDF at MSU)

• Nonlinear Theories for Thin Shells (Cambridge, MA: Division of Engineering and Applied Physics, Harvard University, 1961), by J. Lyell Sanders
  • page images at HathiTrust
  • PDF at dtic.mil

• The Analysis of Structures, Based on the Minimal Principles and the Principle of Virtual Displacements (New York: J. Wiley and Sons; London: Chapman and Hall Ltd., c1956), by Nicholas J. Hoff (page images at HathiTrust)
• Elastic Energy Theory (second edition; New York: J. Wiley and Sons; London: Chapman and Hall, c1942), by John Abraham Van den Broek (page images at HathiTrust)
• Skew Plates and Structures (New York: Macmillan, 1963), by L. S. D. Morley (page images at HathiTrust)
• Plastic Analysis of Structures (New York: McGraw-Hill, 1959), by Philip Gibson Hodge (page images at HathiTrust)
• Introduction to Structural Stability Theory (New York et al.: McGraw-Hill Book Co., 1962), by George Gerard (page images at HathiTrust)

• Large-Scale Structures in Acoustics and Electromagnetics: Proceedings of a Symposium (1996), by National Research Council Commission on Physical Sciences, Mathematics, and Applications (page images with commentary at NAP)

• Alignment Charts; The Teaching of the Calculus of Probability; On the Theory of Complex Functions (Notre Dame Mathematical Lectures #4; 1944), contrib. by Lester R. Ford, A. H. Copeland, and Emil Artin (PDF files at Project Euclid)

• Advanced Design in Structural Steel (Englewood Cliffs, NJ: Prentice-Hall, 1960), by John E. Lothers (page images at HathiTrust)

• Fundamentals of Stress Analysis (second edition; Los Angeles: Aero Publishers, 1960), by Albert Deyarmond and Albert Arslan (page images at HathiTrust)
• A Translation of The Stability of Elastic Equilibrium (uncredited translator; technical report AFFDL-TR-70-25; 1970), by W. T. Koiter (PDF at dtic.mil)
• Mechanical Behavior of Engineering Materials (Englewood Cliffs, NJ: Prentice-Hall, 1962), by Joseph Marin (page images at HathiTrust)
• A.C.S.R. Graphic Method for Sag-Tension Calculations (Pittsburgh: Aluminum Company of America, 1927), by Theodore Varney (page images at HathiTrust)
• Stresses in Aircraft and Shell Structures (New York et al.: McGraw-Hill, 1956), by Paul Kuhn (page images at HathiTrust)
• A Theory for the Effect of Mean Stress on Fatigue of Metals Under Combined Torsion and Axial Load or Bending (1958), by William N. Findley (page images at HathiTrust)
• Torsion Analysis of Rolled Steel Sections (New York: Bethlehem Steel Corp., 1963), by Conrad P. Heins and P. A. Seaburg (page images at HathiTrust)

• Measurement of Blast-Induced Ground Vibrations and Seismograph Calibration (report of investigations #8506; Washington: U.S. Dept. of the Interior, Bureau of Mines, 1967), by Mark S. Stagg and Alvin J. Engler (page images at HathiTrust)

• The Atomic Bombings of Hiroshima and Nagasaki, by Manhattan Engineer District (Gutenberg text)

• Flight-Determined Aerodynamic Properties of a Jet-Augmented, Auxiliary-Flap, Direct-Lift-Control System Including Correlation With Wind-Tunnel Results (NASA Technical Note D-5128, corrected copy; Washington: National Aeronautics and Space Administration, 1969), by L. Stewart Rolls, Anthony M. Cook, and Robert C. Innis
  • PDF at NASA
  • page images at HathiTrust
• Fluid-Dynamic Drag: Practical Information on Aerodynamic Drag and Hydrodynamic Resistance (revised and expanded from author's 1951 "Aerodynamic Drag"; Midland Park, NJ: The author, 1958), by Sighard F. Hoerner (page images at HathiTrust)

• Flight-Determined Aerodynamic Properties of a Jet-Augmented, Auxiliary-Flap, Direct-Lift-Control System Including Correlation With Wind-Tunnel Results (NASA Technical Note D-5128, corrected copy; Washington: National Aeronautics and Space Administration, 1969), by L. Stewart Rolls, Anthony M. Cook, and Robert C. Innis
  • PDF at NASA
  • page images at HathiTrust

• Flight-Determined Aerodynamic Properties of a Jet-Augmented, Auxiliary-Flap, Direct-Lift-Control System Including Correlation With Wind-Tunnel Results (NASA Technical Note D-5128, corrected copy; Washington: National Aeronautics and Space Administration, 1969), by L. Stewart Rolls, Anthony M. Cook, and Robert C. Innis
  • PDF at NASA
  • page images at HathiTrust

• V/STOLAND Avionics System Flight-Test Data on a UH-1H Helicopter (Washington: National Aeronautics and Space Administration, Scientific and Technical Information Office, 1980), by Fredric A. Baker, Dean N. Jaynes, Lloyd D. Corliss, Sam Liden, Robert B. Merrick, and Daniel C. Dugan
  • PDF at NASA
  • page images at HathiTrust

• Elements of Propeller and Helicopter Aerodynamics (New York: Pitman Pub. Corp., 1953), by Daniel O. Dommasch (page images at HathiTrust; US access only)

• Airmobility, 1961-1971 (Washington: Department of the Army, 1999), by John J. Tolson (PDF at US Army CMH)

• On a Steel Horse I Ride: A History of the MH-53 Pave Low Helicopters in War and Peace (Maxwell AFB, AL: Air University Press, 2012), by Darrel D. Whitcomb (PDF with commentary at Air University Press)

• A Computer Program for the Determination of the Acoustic Pressure Signature of Helicopter Rotors Due to Blade Thickness (NASA Technical Memorandum X-3323; 1976), by Gerald H. Mall, F. Farassat, and Langley Research Center (page images at HathiTrust)

• Aerodynamics of a Tilting Ducted Fan Configuration (NASA Technical note D-785; Washington: National Aeronautics and Space Administration, 1961), by Paul F. Yaggy and Kenneth W. Goodson (page images at HathiTrust)

• New Ways: Tiltrotor Aircraft and Magnetically Levitated Vehicles (OTA-SET-507; 1991), by United States Congress Office of Technology Assessment
  • page images at HathiTrust
  • PDF files with commentary at Princeton

• A Computer Program for the Determination of the Acoustic Pressure Signature of Helicopter Rotors Due to Blade Thickness (NASA Technical Memorandum X-3323; 1976), by Gerald H. Mall, F. Farassat, and Langley Research Center (page images at HathiTrust)

• Trandes: A Fortran Program for Transonic Airfoil Analysis or Design (Washington: National Aeronautics and Space Administration, 1977), by Leland A. Carlson (page images at HathiTrust)

• Experimental Results of a Heat-Transfer Study from a Full-Scale Pebble-bed Heater (NASA Technical Note D-265; Washington: National Aeronautics and Space Administration, 1960), by Richard B. Lancashire, Erwin A. Lezberg, and James F. Morris (page images at HathiTrust)

• Hypersonic Technology for Military Application (1989), by National Research Council Commission on Engineering and Technical Systems (page images with commentary at NAP)

• Engineering Supersonic Aerodynamics (New York et al.: McGraw-Hill Book Co., 1950), by Everard Arthur Bonney (page images at HathiTrust)
• Vector Polar Method for Shock Interactions With Area Disturbances (technical note DR 4; Berkeley: University of California, 1959), by Antoni K. Oppenheim and Paul A. Urtiew (page images at HathiTrust)
• Wind-Tunnel Investigation at Supersonic Speeds of a Canard-Controlled Missile with Fixed and Free-Rolling Tail Fins (NASA Technical Paper 1316; 1978), by A. B. Blair (page images at HathiTrust)

• Tables of Supersonic Flow Around Cones (technical report #1, 1947), by Massachusetts Institute of Technology Center of Analysis Computing Section, contrib. by Zdeněk Kopal (page images at HathiTrust)

• Determination of Azimuth Angle at Burnout for Placing a Satellite Over a Selected Earth Position (NASA Technical Note D-233; 1960), by T. H. Skopinski and Katherine G. Johnson (page images at HathiTrust)

• Torsion Analysis of Rolled Steel Sections (New York: Bethlehem Steel Corp., 1963), by Conrad P. Heins and P. A. Seaburg (page images at HathiTrust)

• Plastic Analysis of Structures (New York: McGraw-Hill, 1959), by Philip Gibson Hodge (page images at HathiTrust)

More items available under broader and related terms at left.