Ablative materialsSee also what's at your library, or elsewhere.
Broader term:Used for:- Ablating materials
- Ablative agents
- Ablators
|
Filed under: Ablative materials An experimental investigation of ablating materials at low and high enthalpy potentials / (Washington [D.C.] : National Aeronautics and Space Administration, [1960]), by Bernard Rashis, Thomas E. Walton, and United States National Aeronautics and Space Administration (page images at HathiTrust) Experimental evaluation of throat inserts in a storable-propellant rocket engine / (Washington, D.C. : National Aeronautical and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1966), by Jerry M. Winter, James R. Johnston, Larry D. Plews, and Lewis Research Center (page images at HathiTrust) Experimental evaluation of high-purity-silica reinforced ablative composites as nozzle sections of 7.8-inch-(19.8 CM) diameter throat storable-propellant rocket engine / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1967), by Donald A. Peterson and Lewis Research Center (page images at HathiTrust) Study of critical defects in ablative heat shield systems for the space shuttle / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by R. L. Thompson, W. E. Driver, Ward D. Rummel, Langley Research Center, and Martin Marietta Denver Aerospace (page images at HathiTrust) An analysis of ablation-shield requirements for manned reentry vehicles / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1960), by Leonard Roberts, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) Performance of three ablation materials during simulation of long-duration afterbody heating / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1967), by Marvin B. Dow, Stephen S. Tompkins, and Langley Research Center (page images at HathiTrust) Investigations of high power problems in space shuttle antenna designs / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by William C. Taylor, N. J. Alvares, Langley Research Center, and Stanford Research Institute (page images at HathiTrust) A study of artificial meteors as ablators / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1967), by Charles E. Shepard, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) A study of the reaction-plane approximation in ablation analyses / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1968), by C. W. Stroud and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Instrumentation requirements for a flight reentry heating experiment at interplanetary return velocity / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by Elden S. Cornette, Edward M. Sullivan, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) A 6-inch subsonic high-temperature arc tunnel for structures and material tests / (Washington, D.C. : National Aeronautics and Space Administration, 1963), by Ronald D. Brown, L. Ross Levin, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Determination of effects of oxidation on performance of charring ablators / (Washington, D.C. : National Aeronautics and Space Administration [For sale by the Office of Technical Services, Dept. of Commerce, Washington, D.C. 20230], 1964), by Marvin B. Dow, Robert T. Swann, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Comparison of measurements of internal temperatures in ablation material by various thermocouple configurations / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, Washington, D.C. 20230], 1964), by Marvin B. Dow, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) A survey of thermal radiation studies of ablating bodies in the ballistic range / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1967), by William A. Page, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Ablative performance of various low-density elastomeric composites / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1971), by William E. Howell, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Experimental evaluation of several ablative materials as nozzle sections of a storable-propellant rocket engine / (Washington, D.C. : National Aeronautical and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1966), by Donald A. Peterson, Carl L. Meyer, and Lewis Research Center (page images at HathiTrust) Effects of dielectric covers over shunt slots in a waveguide / (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1964]), by W. F. Croswell, Robert B. Higgins, and Langley Research Center (page images at HathiTrust) Determination of heat-shield char-front recession with a nucleonic technique / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by William G. Davis and Manned Spacecraft Center (U.S.) (page images at HathiTrust) An analysis of a charring ablation thermal protection system / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1965]), by Donald M. Curry and Manned Spacecraft Center (U.S.) (page images at HathiTrust) Effects of dielectric covers over cross slots in a rectangular waveguide / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Marion Crawford Bailey and Langley Research Center (page images at HathiTrust) Effect of composition, density, and environment on the ablative performance of phenolic nylon / (Washington, D. C. : National Aeronautics and Space Administration ; Springfield, Va. : for sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by Robert T. Swann, Ronald K. Clark, William D. Brewer, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) The effect of resin composition and fillers on the performance of a molded charring ablator / (Washington, D.C. : National Aeronautics and Space Administration, [1963]), by Roger W. Peters, Kenneth L. Wadlin, and Langley Research Center (page images at HathiTrust) Measured and computed static aerodynamic characteristics of ablating conical teflon models at Mach number 14 / (Washington, D. C. : National Aeronautics and Space Administration ; Springfield, Va. : for sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by Leland H. Jorgensen, Jack R. Hagen, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) Experimental and theoretical investigation of the ablative performance of five phenolic-nylon-based materials / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Allen G. McLain, Gerald D. Walberg, Kenneth Sutton, and Langley Research Center (page images at HathiTrust) Evaluation of a flash X-ray technique for recession measurements in ablative materials / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]), by William D. Brewer, Philip C. Kassel, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust) A study of the effect of selected material properties on the ablation performance of artificial graphite. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972), by Howard G. Maahs, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) Flight- and ground-test evaluation of pyrrone foams / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972), by Allen G. McLain, Warren C. Kelliher, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) Chemical equilibrium of ablation materials including condensed species / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by C. W. Stroud, Kay L. Brinkley, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust) An approximate analysis of unsteady vaporization near the stagnation point of blunt bodies / (Washington, [D.C.] : National Aeronautics and Space Administration, 1959), by Leonard Roberts and Langley Research Center (page images at HathiTrust) Determination of temperature and material effects on high-velocity impact craters in ablative heat-shield materials / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1966), by Paul E. Tippens, John R. Davidson, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Design of injectors and ablative thrust chambers for a flox-propane rocket engine with a 1.2-inch throat diameter / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 20230], 1969), by Jerry M. Winter, Albert J. Pavli, Donald A. Peterson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Flight investigation of the effects of Apollo heat-shield singularities on ablator performance / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1968), by Thomas E. Walton, Brian J. O'Hare, William G. Witte, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Two-component force balance for measuring skin friction and side force /, by Eugene V. Horanoff, Richard T. Driftmyer, and Naval Surface Weapons Center. White Oak Laboratory (page images at HathiTrust) An investigation of the use of dry ice for ablation simulation /, by David L. Kohlman, R. W. Richardson, Sandia Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust) Decomposition kinetics of the phenolic-carbon cloth FM 5055A ablator : consecutive second order /, by I. Auerbach, U.S. Atomic Energy Commission, and Sandia Corporation (page images at HathiTrust) Development of an aeroacoustic methodology to evaluate heatshield material performance /, by A. L. Laganelli, sponsor Air Force Flight Dynamics Laboratory (U.S.), sponsor Air Force Wright Aeronautical Laboratories, and inc. Science Applications (page images at HathiTrust)
Items below (if any) are from related and broader terms.
Filed under: Materials at high temperatures Materials for High-Temperature Semiconductor Devices (1995), by National Research Council National Materials Advisory Board (page images with commentary at NAP) Development and evaluation of magnetic and electrical materials capable of operating in the 800 ̊to 1600 ̊F temperature range / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by P. E. Kueser, J. W. Toth, Lewis Research Center, and Westinghouse Electric Corporation (page images at HathiTrust) On the problem of obtaining high temperatures at high pressures / ([Oak Ridge, Tenn.] : [U.S. Atomic Energy Commission], [1955?]), by A. F. Vereshchagin, Ya. A. Kalashnikov, and U.S. Atomic Energy Commission (page images at HathiTrust) Evaluation of iron- and nickel-base alloys for medium and high temperature reactor applications : part I / (Richland, Wash. : Hanford Atomic Products Operation, 1961), by H. J. Pessl, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust) High temperature, short-time, uranium carbide-metal reactions / (Richland, Wash. : Hanford Atomic Products Operation, 1963), by J. A. Christensen, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust) The thermal design of high temperature electronic parts and equipments, ([Buffalo] Cornell Aeronautical Laboratory of Cornell University, 1959), by John B. Coleman and Jones P. Welsh (page images at HathiTrust) The thermal conductivity of solids at high temperatures a bibliography. (Washington, Diamond Ordnance Fuze Laboratories, Ordnance Corps, 1959), by W. T. K. Johnson (page images at HathiTrust) Research on properties of high strength materials suitable for high temperature applications (Wright-Patterson Air Force Base, Ohio, Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by Harold N. Cummings, William C. Schulte, and Foster B. Stulen (page images at HathiTrust) Dielectric spectroscopy of high-temperture materials ([Wright-Patterson Air Force Base, Ohio, Air Force Materials Laboratory, Air Force Systems Command, 1971]), by W. B. Westphal, J. Iglesias, and Massachusetts Institute of Technology. Laboratory for Insulation Research (page images at HathiTrust) Fatigue-crack propagation in several titanium and stainless-steel alloys and one superalloy / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1964), by C. M. Hudson, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Preliminary analytical investigation of booster recovery by use of a hot-air balloon for both deceleration and final recovery / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia], 1966), by Stanley H. Scher, Irene G. Young, James C. Dunavant, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust; US access only) A 6-inch subsonic high-temperature arc tunnel for structures and material tests / (Washington, D.C. : National Aeronautics and Space Administration, 1963), by Ronald D. Brown, L. Ross Levin, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Determination of effects of oxidation on performance of charring ablators / (Washington, D.C. : National Aeronautics and Space Administration [For sale by the Office of Technical Services, Dept. of Commerce, Washington, D.C. 20230], 1964), by Marvin B. Dow, Robert T. Swann, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Evaluation of selected refractory oxide materials for use in high-temperature pebble-bed wind-tunnel heat exchangers / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1964), by John D. Buckley, Bennie W. Cocke, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) High temperature radome design techniques. (Buffalo, Cornell Aeronautical Laboratory, [196-?]), by Godfrey F. Buranich (page images at HathiTrust) Nonlinear constitutive relations for high temperature applications : proceedings of a symposium sponsored by the University of Akron and NASA Lewis Research Center and held at the University of Akron, Akron, Ohio, May 19-20, 1982. (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by Symposium on Nonlinear Constitutive Relations for High Temperature Applications (1st : 1982 : University of Akron), Lewis Research Center, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and University of Akron (page images at HathiTrust) ARPA-NBS program of research on high temperature materials and laser materials: reporting period July 1 to December 31, 1969. ([Gaithersburg, Md.]; For sale by the Supt. of Docs., U.S. Govt. Print. Off., Washington, 1970), by United States. National Bureau of Standards, Herbert S. Bennett, Alan D. Franklin, and United States. Advanced Research Projects Agency (page images at HathiTrust) A nonlinear high temperature fracture mechanics basis for Strainrange Partitioning / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Takayuki Kitamura, Gary R. Halford, and Lewis Research Center (page images at HathiTrust) Hot hardness of nickel-rich nickel-chromium-aluminum alloys / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by Stanley R. Levine and United States National Aeronautics and Space Administration (page images at HathiTrust) Thermal-vacuum testing of high-temperature electrical components / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]), by W. L. Grant, P. E. Kueser, Lewis Research Center, and Westinghouse Electric Corporation. Aerospace Electrical Division (page images at HathiTrust) Fused fluoride coatings as solid lubricants in liquid sodium, hydrogen, vacuum, and air / (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1964]), by Harold E. Sliney, Gordon P. Allen, Thomas N. Strom, and Lewis Research Center (page images at HathiTrust) Observations of properties of sintered wrought tungsten sheet at very high temperatures / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, 1963]), by Earl C. Sutherland, William D. Klopp, and United States National Aeronautics and Space Administration (page images at HathiTrust) Ablation performance of glasslike carbons, pyrolytic graphite, and artificial graphite in the stagnation pressure range 0.035 to 15 atmospheres / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1970]), by Howard G. Maahs and Langley Research Center (page images at HathiTrust) Materials / (Washington, D.C. : National Aeronautics and Space Administration, 1968), by William D. Klopp and Lewis Research Center (page images at HathiTrust) Static, subsonic, and supersonic oxidation of JT graphite composites / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by John D. Buckley and Langley Research Center (page images at HathiTrust) Lubricating properties of some bonded fluoride and oxide coatings for temperature to 1500 ̊F / (Washington : National Aeronautics and Space Administration, 1960), by Harold E. Sliney and Lewis Research Center (page images at HathiTrust) High-temperature transient pressure transducer for use in liquid-metal systems / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by Ted W. Nyland, Richard Ernest Chase, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust) Influence of salt and elevated-temperature exposure on the maximum compressive strength of titanium-alloy skin-stringer panels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]), by James E. Gardner, Dick M. Royster, and Langley Research Center (page images at HathiTrust) Upwash patterns on ablating and nonablating cones at hypersonic speeds / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1969), by John B. McDevitt, Jack A. Mellenthin, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) A study of the effect of selected material properties on the ablation performance of artificial graphite. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972), by Howard G. Maahs, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust) Evaluation of high-temperature bearing cage materials / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by Erwin V. Zaretsky, William J. Anderson, and Lewis Research Center (page images at HathiTrust) Measurement of optical radiation from the wake of ablating blunt bodies in flight at speeds up to 10 KM per second / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1965), by Jack D. Stephenson, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Determination of temperature and material effects on high-velocity impact craters in ablative heat-shield materials / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1966), by Paul E. Tippens, John R. Davidson, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Study of high temperature materials : final report / (Griffiss Air Force Base, N.Y. : [Rome Air Development Center?], 1962), by Edward J. Smoke and Rome Air Development Center (page images at HathiTrust) Thermophysical properties of thermal insulating materials. (Wright-Patterson Air Force Base, O., Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, 1962), by Mo.) Midwest Research Institute (Kansas City (page images at HathiTrust) Heat-transfer and pressure distributions on spherically blunted 25 ̊half-angle cone at Mach 8 and angles of attack up to 90 ̊/ (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1968), by Dennis M. Bushnell, Jarrett K. Huffman, Robert A. Jones, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) Flight investigation of the effects of Apollo heat-shield singularities on ablator performance / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1968), by Thomas E. Walton, Brian J. O'Hare, William G. Witte, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only) High-temperature plastics (New York, Reinhold, [1962]), by Walter Brenner (page images at HathiTrust) ARPA-NBS program of research on high temperature materials and laser materials : reporting period January 1 to June 30, 1970 / (Washington, D.C. : For sale by the Supt. of Docs., U.S. G.P.O., Washington, 1971), by United States. National Bureau of Standards, Herbert S. Bennett, Alan D. Franklin, and United States. Advanced Research Projects Agency (page images at HathiTrust) Materials at high temperatures (Guildford, Surrey : Butterworth-Heinemann Ltd., c1991-) (page images at HathiTrust; US access only) Development of high-temperature strain gages / ([Washington, D.C.] : U.S. Dept. of Commerce, National Bureau of Standards : For sale by the Supt. of Docs., U.S. G.P.O., [1961]), by J.W. Pitts, Dwight Garrison Moore, and United States. National Bureau of Standards (page images at HathiTrust) Deformation and fracture of metals at elevated temperatures : for the period January 1, 1957 to September 30, 1958 /, by Arup R. Chaudhuri, Nicholas J. Grant, issuing body Massachusetts Institute of Technology, and sponsor U.S. Atomic Energy Commission (page images at HathiTrust) Investigation of feasibility of utilizing available heat resistant materials for hypersonic leading edge applications. (Wright-Patterson Air Force Base, Ohio, Wright Air Development Center, Air Research and Development Command, U. S. Air Force, 19-), by Bell Aircraft Corporation (page images at HathiTrust) Use of micropyrometer for high-temperature melting point / ([Washington, D.C.] : U.S. Dept. of Commerce, Bureau of Mines, 1932), by G. R. Fitterer and M. B. Royer (page images at HathiTrust) ARPA-NBS program of research on high temperature materials and laser materials : reporting period January 1 to June 30, 1969 / (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. G.P.O., 1970), by A. D. edt Franklin, H. S. Bennett, Institute for Materials Research. Inorganic Materials Division, United States. National Bureau of Standards. Technical note, and United States. Advanced Research Projects Agency (page images at HathiTrust) Thermal expansion of high temperature materials / (Livermore, Ca. : Lawrence Radiation Laboratory, 1960), by O. H. Krikorian and Lawrence Radiation Laboratory (page images at HathiTrust) The H-1 high temperature graphite irradiation experiment / (Richland, Wash. : U.S. Atomic Energy Commission, 1961), by J. M. Davidson, J. W. Helm, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation (page images at HathiTrust) Influence of selected additives and CaO:SiO₂ ratio on high temperature strength of MgO refractories / (Avondale, Md. : U.S. Dept. of the Interior, Bureau of Mines, 1982), by N. S. Raymon (page images at HathiTrust) High-temperature corrosion resistance of basic refractories to coal and lignite ash slags / ([Avondale, Md (4900 LaSalle Rd., Avondale 20782)] : U.S. Dept of the Interior, Bureau of Mines, [1982]), by J. E. Pahlman, S. E. Khalafalla, and C. F. Anderson (page images at HathiTrust) Temperature-viscosity measurements in the systems CaO-SiO₂and CaO-SiO₂-CaF₂ / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1934), by M. B. Royer, G. L. Frear, F. A. Hartgen, C. H. Herty, Metallurgical Advisory Board, and Carnegie Institute of Technology (page images at HathiTrust) A study of radionuclide adsorption in the K recirculation loops / (Richland, Wash. : U.S. Atomic Energy Commission, 1961), by L. D. Perrigo, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust) A method of determining the thermal conductivity of incandescent solids / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by B. B. Brenden, H. W. Newkirk, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation (page images at HathiTrust) A carbon arc image furnace and microscope for studies at high temperatures / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by H. W. Newkirk, B. B. Brenden, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation (page images at HathiTrust) Measurements of the index of refraction of glass at high temperatures / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926), by C. G. Peters and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust) Materials testing reactor : structure temperatures / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, [1956]), by G. H. Hanson, A. V. Grimaud, K. A. McCollom, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission (page images at HathiTrust) High temperature thermometry seminar : papers presented at a seminar at AEC Headquarters, Washington, D.C., on February 24-26, 1965., by D.C.) High Temperature Thermometry Seminar (1965 : Washington and U.S. Atomic Energy Commission (page images at HathiTrust) Investigation of the thermal properties of high-temperature insulation materials /, by A. E. Wechsler, Peter E. Glaser, sponsor Air Force Flight Dynamics Laboratory (U.S.), issuing body United States. Air Force. Systems Command. Aeronautical Systems Division, Inc. Arthur D. Little, sponsor Wright-Patterson Air Force Base (Ohio), and sponsor Air Force Materials Laboratory (U.S.) (page images at HathiTrust) Effect of compressive loads on structural fatigue at elevated temperature /, by Douglas Aircraft Company, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, and sponsor Douglas Aircraft Company (page images at HathiTrust) Electron beam technique for measuring the thermophysical properties of materials /, by H. Malcolm Childers, J. M. Cecero, sponsor United States. Wright Air Development Division, United States. Air Force. Air Research and Development Command. issuing body, and sponsor American Machine and Foundry Company (page images at HathiTrust) Research on high temperature materials at the National Bureau of Standards / (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards : For Sale by the Supt. of Docs., G.P.O., 1968), by Elio edt Passaglia, Institute for Materials Research (U.S.). Metallurgy Division, and United States. National Bureau of Standards. Technical note (page images at HathiTrust) The true stress-strain properties of brittle materials to 5000° F : final report., by U.S. Atomic Energy Commission. Division of Technical Information and Ala.) Southern Research Institute (Birmingham (page images at HathiTrust) The true stress-strain properties of brittle materials to very high temperatures : final report to U.S. Atomic Energy Commission (1961-1962)., by U.S. Atomic Energy Commission. Division of Technical Information and Ala.) Southern Research Institute (Birmingham (page images at HathiTrust) Directory of high temperature corrosion research : organizations, investigators, and programs., by Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust) Basic chemistry of high temperature inorganic systems : semiannual progress report / (Canoga Park, Calif. : Atomics International ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce), by U.S. Atomic Energy Commission. Technical Information Center and North American Aviation. Atomics International Division (page images at HathiTrust) Electrical conductors at elevated temperatures /, by Nicholas Fuschillo, Russel A. Lindberg, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States. sponsor, and Inc. Melpar (page images at HathiTrust) Research hot pressing / (Canoga Park, California : Atomics International, [1961]), by J. D. McClelland, W. M. Smith, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust) Effect of pressure and temperature on the end point density of alumina / (Canoga Park, California : Atomics International, [1961]), by J. D. McClelland, E. H. Zehms, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust) Semi-continuous hot pressing / (Canoga Park, California : Atomics International, [1961]), by J. D. McClelland, E. H. Zehms, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust) Special applications of quartz fibers : the fabrication and use of microtubing and helices / (Miamisburg, Ohio : Mound Laboratory, 1954), by M. I. Gray, A. J. Rogers, R. G Olt, U.S. Atomic Energy Commission, Mound Laboratory, and Monsanto Chemical Company (page images at HathiTrust) Thermal properties of high-temperature materials /, by W. D. Wood, H. W. Deem, George C. Marshall Space Flight Center, U.S. Army Aviation and Missile Command, U.S. Atomic Energy Commission, Redstone Scientific Information Center, and Battelle Memorial Institute (page images at HathiTrust) High temperature thermometry seminar : held October 1-2, 1959, at Oak Ridge National Laboratory /, by Tenn.) High Temperature Thermometry Seminar (1959 : Oak Ridge, R. R. Cuneo, and U.S. Atomic Energy Commission (page images at HathiTrust) Apparatus for determining the physical properties of solutions at elevated temperatures and pressures : (information report) /, by John Robert Heiks, W. C. McCluggage, L. V. Jones, M. K. Barnett, U.S. Atomic Energy Commission, Mound Laboratory, and Monsanto Chemical Company (page images at HathiTrust) Data summary report for fission product release test HI-2 /, by M. F Osborne, K. S. Norwood, C. S. Webster, J. R. Travis, R. A. Lorenz, Oak Ridge National Laboratory. Chemical Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust) Data summary report for fission product release test HI-3 /, by M. F Osborne, C. S. Webster, J. R. Travis, K. S. Norwood, R. A. Lorenz, Oak Ridge National Laboratory. Chemical Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust) Data summary report for fission product release test HI-4 /, by M. F Osborne, C. S. Webster, J. R. Travis, K. S. Norwood, R. A. Lorenz, J. L. Collins, Oak Ridge National Laboratory. Chemical Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust) Data summary report for fission product release test HI-1 /, by M. F Osborne, C. S. Webster, J. R. Travis, R. A. Lorenz, Oak Ridge National Laboratory. Chemical Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust) Bibliography on the high temperature chemistry and physics of materials : July, August, September 1969 /, by J. Diamond, International Union of Pure and Applied Chemistry, and United States. National Bureau of Standards. Commission on High Temperatures and Refractories (page images at HathiTrust) An instrument for measuring the thermal conductance of high-temperature structural materials /, by J. K. Sparrell, J. D. Plunkett, K. G. Coumou, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, sponsor Dynatech R/D Company, and Wright-Patterson Air Force Base (Ohio) (page images at HathiTrust) Thermal properties of materials at elevated temperatures /, by Herbert W. Deem, Charles F. Lucks, Webster D. Wood, sponsor United States. Air Force. Air Research and Development Command, issuing body Wright Air Development Center, and sponsor Battelle Memorial Institute (page images at HathiTrust) Measurement of thermal properties /, by I. B. Fieldhouse, J. I. Lang, Armour Research Foundation (U.S.). sponsor, United States. Wright Air Development Division. sponsor, and United States. Air Force. Air Research and Development Command. issuing body (page images at HathiTrust) The High temperature hypersonic gasdynamics facility /, by Robert W. Milling, sponsor United States. Air Force. Systems Command. Aeronautical Systems Division, and issuing agency United States. Air Force. Systems Command (page images at HathiTrust) Bibliography on the high temperature chemistry and physics of materials / (Washington, D.C. : The Bureau : For sale by the Superintendent of Documents, U.S. G.P.O., 1969-), by International Union of Pure and Applied Chemistry. Commission on High Temperatures & Solid State Chemistry, International Union of Pure and Applied Chemistry. Commission on High Temperatures and Refractory Materials, International Union of Pure and Applied Chemistry. Commission on High Temperatures and Refractories, and Institute for Materials Research (U.S.) (page images at HathiTrust)
More items available under broader and related terms at left. |