The Online Books Page

Air-cooled engines -- Testing

See also what's at your library, or elsewhere.

• Air-cooled engines
• Internal combustion engines -- Testing
• Testing

• Fabrication and endurance of air-cooled strut-supported turbine blades with struts cast of X-40 alloy (National Advisory Committee for Aeronautics, 1956), by Eugene F. Schum, Robert E. Oldrieve, Francis S. Stepka, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics (page images at HathiTrust)
• Analytical and experimental investigation of a forced-convection air-cooled internal strut-supported turbine blade (National Advisory Committee for Aeronautics, 1954), by Eugene F. Schum, Francis S. Stepka, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Static sea-level performance of an axial-flow-compressor turbojet engine with an air-cooled turbine (National Advisory Committee for Aeronautics, 1955), by Reeves P. Cochran, Robert P. Dengler, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• NACA Wartime Reports. Series E. (National Advisory Committee for Aeronautics, 1943), by R. C. Spencer, A. W. Jones, Aircraft Engine Research Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• NACA Wartime Reports. Series L. (National Advisory Committee for Aeronautics, 1942), by George P. Wood, D. E. Brimley, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• Automotive engine testing; a manual of test procedure (Pitman Pub. Corp., 1940), by Foster M. Gruber (page images at HathiTrust)
• The testing of high speed internal combustion engines : with special reference to automobile and aircraft types, and to the testing of automobiles (Van Nostrand, 1925), by Arthur William Judge (page images at HathiTrust)
• The testing of internal combustion engines, by S.J. Young ... and R. W. J. Pryer ... (D.Van Nostrand company, inc., 1937), by Sydney John Young and Robert William John Pryer (page images at HathiTrust)
• The testing of high speed internal combustion engines, with special reference to automobile and aircraft types and to the testing of automobiles (D. Van Nostrand company, inc., 1932), by Arthur William Judge (page images at HathiTrust)
• Testing of the LaForce engine by the Environmental Protection Agency staff report prepared for the Committee on Commerce, U.S. Senate (U.S. Govt. Print. Off., 1975), by Barry I. Hyman and United States Senate Committee on Commerce (page images at HathiTrust)
• The testing of high speed internal combustion engines, with special reference to automobile and aircraft types, and to the testing of automobiles (Chapman & Hall, 1924), by Arthur William Judge (page images at HathiTrust; US access only)
• Die Gasmaschine : insonderheit die Viertakt-Gasmaschine, ihre Untersuchung auf Wirtschaftlichkeit und Leistung und Beschreibung der dazu nötigen Instrumente (F. Vieweg und Sohn, 1908), by Arthur Eckardt (page images at HathiTrust; US access only)
• Tests of a Bogart gas engine (1913), by Martin Ira Mix, Roscoe Conkling Harris, and Paul Hedges Gibbs (page images at HathiTrust; US access only)
• A thermodynamic analysis of gas engine tests (University of Illinois, 1925), by Crandall Zachariah Rosecrans and George Theodore Felbeck (page images at HathiTrust)
• NACA Wartime Reports. Series E. (National Advisory Committee for Aeronautics, 1943), by Arnold E. Biermann, Lester C. Corrington, Aircraft Engine Research Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• NACA Wartime Reports. Series E. (National Advisory Committee for Aeronautics, 1943), by Aircraft Engine Research Laboratory and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Internal-combustion engines: power test codes. (New York, 1957), by American Society of Mechanical Engineers (page images at HathiTrust; US access only)
• Calibration procedure for internal combustion engine tester (general). (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)

• Effect of primary-zone water injection on pollutants from a combustor burning liquid ASTM A-1 and vaporized propane fuels (National Aeronautics and Space Administration ;, 1973), by Robert D. Ingebo, Carl T. Norgren, and Lewis Research Center (page images at HathiTrust)
• Relation of emitted ultraviolet radiation to combustion of hydrogen and oxygen at 20 atmospheres (National Aeronautics and Space Administration :, 1964), by Marshall C. Burrows, Ronald Razner, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6435 (National Aeronautics and Space Administration ;, 1971), by Albert J. Juhasz, J. D. Holdeman, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Radiation processes related to oxygen-hydrogen combustion at high pressures (National Aeronautics and Space Administration :, 1964), by Marshall C. Burrows and Lewis Research Center (page images at HathiTrust)
• High-pressure combustor exhaust emissions with improved air-atomizing and conventional pressure-atomizing fuel nozzles (National Aeronautics and Space Administration ;, 1973), by Robert D. Ingebo, Carl T. Norgren, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Experiments with hydrogen and oxygen in regenerative engines at chamber pressures from 100 to 300 pounds per square inch absolute (National Aeronautics and Space Administration, 1960), by William A. Tomazic, R. James Rollbuhler, Edward R. Bartoo, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-7021 (National Aeronautics and Space Administration ; [For sale for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by Donald F. Schultz, Jerrold D. Wear, Porter J. Perkins, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Afterburner performance of circular v-gutters and a sector of parallel v-gutters for a range of inlet temperatures to 1255 K (1800 ̊F) (National Aeronautics and Space Administration ;, 1973), by J. Robert Branstetter, Gregory M. Reck, and Lewis Research Center (page images at HathiTrust)
• Seven commercial organo-metallic additives (National Advisory Committee for Aeronautics, 1954), by Vincent F. Hlavin, William P. Cook, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• Effect of fuel additives on carbon deposition in a J33 single combustor [Part] 1, Three metallic-organic additives (National Advisory Committee for Aeronautics, 1952), by Edmund R. Jonash, William P. Cook, Jerrold D. Wear, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• Combustion-chamber performance (National Advisory Committee for Aeronautics, 1948), by Bemrose Boyd, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• Sonotech, Inc. frequency-tunable pulse combustion system (Cello Pulse Burner) : innovative technology evaluation report. (National Risk Management Research Laboratory, 1997), by National Risk Management Research Laboratory (U.S.), United States. Environmental Protection Agency. Office of Research and Development, and Inc Sonotech (page images at HathiTrust)

• Comparative test of alcohol, gasoline, and kerosene in a Meitz and Weiss oil engine (1911), by Charles Antrim de Krafft Bunting and Ira Burton Dole (page images at HathiTrust; US access only)
• An initial assessment of the literature on the measurement, control, transport, transformation and health effects of urregulated diesel engine emissions (Dept. of Transportation, National Highway Traffic Safety Administration ;, 1979), by inc South Coast Technology and J. Andon (page images at HathiTrust)

• Testing of a diesel-powered impact cutting head for hard-rock mining (U.S. Dept. of the Interior, Bureau of Mines, 1991), by P. D. Kovscek, H. Handewith, Charles D. Taylor, and United States Bureau of Mines (page images at HathiTrust)

• Centaur space vehicle pressurized propellant feed system tests. (National Aeronautics and Space Administration ;, 1972), by Lewis Research Center (page images at HathiTrust)
• Exploratory tests of two strut fuel injectors for supersonic combustion (National Aeronautics and Space Administration ;, 1974), by Griffin Y. Anderson, Paul B. Gooderum, and Langley Research Center (page images at HathiTrust)

• The engine indicator; its design, theory and special applications. (Instruments Pub. Co., 1934), by Kalman J. De Juhasz (page images at HathiTrust)
• Der Indikator und seine Anwendung : für den praktischen Gebrauch (R. Gärtner, 1893), by P. H. Rosenkranz (page images at HathiTrust)
• The indicator for high-speed internal-combustion engines. (Ithaca, N.Y., 1926), by Conant Lee (page images at HathiTrust)
• Practical hints on running a gas engine (U.S. Dept. of Agriculture, 1919), by Arnold Phipps Yerkes (page images at HathiTrust)
• Improvement of accuracy of balanced-pressure indicators and development of an indicator calibrating machine (National Advisory Committee for Aeronautics, 1949), by James C. Livengood and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• Theoretical and experimental investigation of supersonic combustion (Polytechnic Institute of Brooklyn, Dept. of Aerospace Engineering and Applied Mechanics, 1962), by Antonio Ferri, Victor Zakkay, Paul A. Libby, and Polytechnic Institute of Brooklyn. Dept. of Aerospace Engineering and Applied Mechanics (page images at HathiTrust; US access only)

• Test of a gasoline engine with various fuels (1911), by Frank Hayward Pond and Anton Edward Horst (page images at HathiTrust; US access only)

• NACA Wartime Reports. Series E. (National Advisory Committee for Aeronautics, 1942), by Herman H. Ellerbrock, Arthur W. Goldstein, Aircraft Engine Research Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• NACA Wartime Reports. Series E. (National Advisory Committee for Aeronautics, 1943), by Harvey A. Cook, W. T. Olson, Aircraft Engine Research Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Interrelation of exhaust-gas constituents (National Advisory Committee for Aeronautics, 1938), by Harold C. Gerrish, Fred Voss, and Langley Aeronautical Laboratory (page images at HathiTrust)

• Comparative thermal efficiency tests of alcohol and kerosene used as a fuel on the Mietz and Weiss oil combustion engine (1909), by Martin Joel Anderson and Edward Franklin Irving (page images at HathiTrust; US access only)
• Comparison of relative sensitivities of the knock limits of two fuels to six engine variables (National Advisory Committee for Aeronautics ;, 1946), by Harvey A. Cook, Ernest I. Prichard, Louis F. Held, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• Investigation of the discharge rate of a fuel-injection system (National Advisory Committee for Aeronautics ;, 1931), by Harold C. Gerrish, Fred Voss, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• The design, construction and test of a direct reading engine indicator (1917), by Alexander McJunkin Tower and Humphreys Oliver Siegmund (page images at HathiTrust; US access only)

• Comparison of acoustic performance of five muffler configurations on a small helicopter (National Aeronautics and Space Administration ;, 1974), by Robert J. Pegg, David A. Hilton, and Langley Research Center (page images at HathiTrust)

More items available under broader and related terms at left.