The Online Books Page

Aircraft gas-turbines -- Testing -- Equipment and supplies

See also what's at your library, or elsewhere.

• Aircraft gas-turbines -- Testing
• Testing -- Equipment and supplies

• Integrated exhaust gas analysis system for aircraft turbine engine component testing (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Robert L. Summers, Robert C. Anderson, and Lewis Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Preliminary study of methods for providing thermal shock resistance to plasma-sprayed ceramic gas-path seals (National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1980), by Robert C. Bill, David E. Brewe, and Donald W. Wisander (page images at HathiTrust)
• Nonlinear, three-dimensional finite-element analysis of air-cooled gas turbine blades (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1980), by Albert Kaufman, Raymond E. Gaugler, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Experimental flow coefficients of a full-coverage film-cooled-vane chamber (National Aeronautics and Space Administration., 1977), by Peter L. Meitner, Steven A. Hippensteele, U.S. Army Air Mobility Research and Development Laboratory, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Effect of primary zone equivalence ratio on pollutant formation (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by Russell W. Claus, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Research turbine for high-temperature core engine application (National Aeronautics and Space Administration ;, 1974), by Edward M. Szanca and Lewis Research Center (page images at HathiTrust)
• Spin synchronous X-ray sinography (SXS) for nondestructive imaging of turbine engines under loads (Federal Aviation Administration, Office of Aviation Research ;, 1996), by T. Kirchener, J. Youngberg, P. Burnstein, Foster-Miller, and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
• Turbine engine diagnostics system study (FAA Technical Center ;, 1991), by Barbara K. McQuiston, Ronald L. De Hoff, Inc Systems Control Technology, and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)

• Effect of hole geometry and electric-discharge machining (EDM) on airflow rates through small-diameter holes in turbine-blade material (National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1980), by Steven A. Hippensteele and Reeves P. Cochran (page images at HathiTrust)
• Flow visualization of discrete-hole film cooling with a spanwise injection over a cylinder (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by Louis M. Russell, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Gas turbine ceramic-coated-vane concept with convection-cooled porus metal core (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Albert F. Kascak, Lewis Research Center, Propulsion Laboratory (U.S.), and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Turbine engine diagnostics system study (FAA Technical Center ;, 1991), by Barbara K. McQuiston, Ronald L. De Hoff, Inc Systems Control Technology, and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)

• Effect of fiber diameter and matrix alloys on impact-resistant boron/aluminum composites (National Aeronautics and Space Administration :, 1976), by David L. McDanels, Robert A. Signorelli, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Directionally solidified iron-base eutectic alloys (National Aeronautics and Space Administration ;, 1976), by Surendra N. Tewari and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Effect of diffuser bleed on performance of an annular swirl can combustor (National Aeronautics and Space Administration ;, 1974), by Albert J. Juhasz and Lewis Research Center (page images at HathiTrust)
• Modifications that improve performance of a double annular combustor at simulated engine idle conditions (National Aeronautics and Space Administration ;, 1974), by Donald F. Schultz and Lewis Research Center (page images at HathiTrust)
• Variable combustor geometry for improving the altitude relight capability of a double annular combustor (National Aeronautics and Space Administration ;, 1974), by Donald F. Schultz and Lewis Research Center (page images at HathiTrust)
• Exhaust emissions of a double annular combustor : parametric study (National Aeronautics and Space Administration ;, 1975), by Donald F. Schultz and Lewis Research Center (page images at HathiTrust)
• Idle efficiency and pollution results for two-row swirl-can combustors having 72 modules (National Aeronautics and Space Administration ;, 1975), by James A. Biaglow, Arthur M. Trout, and Lewis Research Center (page images at HathiTrust)
• Ground idle performance improvement of a double-annular combustor by using simulated variable combustor geometry (National Aeronautics and Space Administration ;, 1975), by Donald F. Schultz and Lewis Research Center (page images at HathiTrust)
• Performance of a short modular turbojet combustor segment using ASTM-A1 fuel (National Aeronautics and Space Administration ;, 1971), by Richard W. Niedzwiecki, Harry M. Moyer, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Combustion stability of single swirl-can combustor modules using ASTM-A1 liquid fuel (National Aeronautics and Space Administration ;, 1969), by Richard W. Niedzwiecki, Robert E. Jones, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Performance of a 48-module swirl-can turbojet combustor segment at high temperatures using ASTM-A1 fuel (National Aeronautics and Space Administration ;, 1969), by Richard W. Niedzwiecki, Harry M. Moyer, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6706 (National Aeronautics and Space Administration :, 1972), by Donald F. Schultz, Porter J. Perkins, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Effect of exposure cycle on hot-salt stress-corrosion of a titanium alloy (National Aeronautics and Space Administration ;, 1974), by Hugh R. Gray, James R. Johnston, and Lewis Research Center (page images at HathiTrust)
• Resistance of a [gamma]/[gamma]-́[delta] directionally solidified eutectic alloy to recrystallization (National Aeronautics and Space Administration ;, 1975), by Surendra N. Tewari, Charles W. Andrews, Coulson M. Scheuermann, and Lewis Research Center (page images at HathiTrust)
• Effects of carbon and hafnium concentrations in wrought powder-metallurgy superalloys based on NASA IIB-11 alloy (National Aeronautics and Space Administration ;, 1976), by Robert V. Miner and Lewis Research Center (page images at HathiTrust)
• Experimental evaluation of the series-hybrid rolling-element bearing (National Aeronautics and Space Administration ;, 1970), by Richard J. Parker and Lewis Research Center (page images at HathiTrust)
• Effect of chlorine purification on oxidation resistance of some mechanical carbons (National Aeronautics and Space Administration ;, 1974), by Donald W. Wisander, Gordon P. Allen, and Lewis Research Center (page images at HathiTrust)

• Hot-salt stress-corrosion of a titanium alloy under a simulated turbine-engine compressor environment (National Aeronautics and Space Administration ;, 1969), by Hugh R. Gray, James R. Johnston, and Lewis Research Center (page images at HathiTrust)

• A Tensile testing apparatus for short fine filaments with optical-mechanical strain measurement (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by J. E. Emrick, H. L. Gegel, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
• A Survey of checkout equipment used in Air Force weapon systems : with emphasis on the man-machine relationship (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by Louis T. Pope, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command, and Personnel Research Laboratory (Lackland Air Force Base (Tex.)) (page images at HathiTrust)
• Test equipment management handbook. (Dept. of Transportation, Federal Aviation Administration, 1975), by United States Federal Aviation Administration (page images at HathiTrust)

• Operator's manual : water testing kit, chemical agents AN-M2, (NSN 6665-00-171-9747) and refill kit, chemical agent detector, V-G, ABC-M30A1, (NSN 6665-00-909-3647). (Headquarters, Dept. of the Army, 1989), by United States. Department of the Army (page images at HathiTrust)
• Operator's manual : tester, airflow, gas-particulate filter unit, M39 (NSN 6680-00-436-4212). (Headquarters, Dept. of the Army, 1992), by United States. Department of the Army (page images at HathiTrust)
• Equipment improvement report and maintenance digest : Test, Measurement and Diagnostic Equipment (TMDE), (second quarter, CY 1985). (Headquarters, Dept. of the Army, 1985), by United States. Department of the Army (page images at HathiTrust)
• Calibration procedure for test facility set AN/GRM-95(V)2, (NSN 6625-01-104-8926). (Headquarters, Dept. of the Army, 1985), by United States. Department of the Army (page images at HathiTrust)
• Operator's and organizational maintenance manual for tester, density and moisture, (soil and asphalt) nuclear method, Campbell Pacific model MC-1(CCE), (NSN 6635-01-030-6896). (Headquarters, Dept. of the Army, 1985), by United States. Department of the Army (page images at HathiTrust)
• Calibration procedure for test facilities kit MK-994/AR, (NSN 6625-00-802-7191). (Headquarters, Dept. of the Army, 1994), by United States. Department of the Army (page images at HathiTrust)

• Test sets : 1-61-A, 1-61-B, and 1-61-C (G. P.O., 1944), by United States War Department (page images at HathiTrust)

• Nondestructive tests of components of EBR-I, CORE IV (Argonne National Laboratory, 1963), by K. Balaramamoorthy, R. B. Perry, C. J. Renken, R. H. Slener, Bombay 1 Atomic Energy Establishment, U.S. Atomic Energy Commission, and Argonne National Laboratory. Metallurgy Division (page images at HathiTrust)

• A high temperature-pressure air heater : (suitable for intermittent hypersonic wind-tunnel operation) (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research Development and Command, United States Air Force, 1956., 1956), by Martin H. Bloom, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Polytechnic Institute of Brooklyn (page images at HathiTrust; US access only)

• D.C. Powered Timing Light Model 161.2158 for 12 Volt Ignition Systems: Sears Owners Manual, by Roebuck and Company Sears (Gutenberg ebook)

• Apparatus for studying ball spinning friction (National Aeronautics and Space Administration ;, 1965), by Steven T. Miller, Erwin V. Zaretsky, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)

• Video camera system for locating bullet holes in targets at a ballistics range (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by A. W. Burner, W. K. Goad, D. R. Rummler, and Langley Research Center (page images at HathiTrust)

• Dynamic bearing capacity of soils : dynamic loading machine and preliminary small-scale footing tests (U.S. Army Engineer Waterways Experiment Station, 1962), by R. C Sloan and U.S. Army Engineer Waterways Experiment Station (page images at HathiTrust)

• Home-made seed corn testers (Iowa Agricultural Experiment Station, 1912), by Harold De Mott Hughes (page images at HathiTrust)

• A simple cage for testing DDT residual treatments (U.S. Dept. of Agriculture, Agricultural Research Administration, Bureau of Entomology and Plant Quarantine, 1946), by A. H. Madden, A. W. Lindquist, and United States. Bureau of Entomology and Plant Quarantine (page images at HathiTrust)

• The digital tape recorder analyzer (National Aeronautics and Space Administration :, 1964), by Joseph A. Sciulli and Goddard Space Flight Center (page images at HathiTrust)

• The Minnesota drain tile testing machine (University of Minnesota, Agricultural Experiment Station, 1965), by Phillip W. Manson and Alden E. Domning (page images at HathiTrust; US access only)

• Preparation of etched circuits for laboratory use (Health and Safety Laboratory, U.S. Atomic Energy Commission, 1962), by Frederick C. Wilson and U.S. Atomic Energy Commission. Health and Safety Laboratory (page images at HathiTrust)

More items available under broader and related terms at left.