The Online Books Page

Airplanes -- Design and construction -- Computer programs

See also what's at your library, or elsewhere.

• Airplanes -- Design and construction
• Airplanes -- Computer programs

• Airplanes -- Design and construction -- Computer programs -- Statistics
• Airplanes, Military -- Design and construction -- Computer programs
• Jet engines -- Design and construction -- Computer programs
• Supersonic planes -- Design and construction -- Computer programs
• Transport planes -- Design and construction -- Computer programs
• Airplanes -- Motors -- Mufflers -- Design and construction -- Computer programs
• Airplanes -- Wings -- Design and construction -- Computer programs

• A computer program for fitting smooth surfaces to an aircraft configuration and other three-dimensional geometries (National Aeronautics and Space Administration, 1975), by Charlotte B. Craidon, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• PCSYS, the optimal design integation system picture drawing system with hidden line algorithm capability for aerospace vehicle configurations (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1977), by D. S. Hague, J. D. Vanderburg, Aerophysics Research Corporation, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Numerical aircraft design using 3-D transonic analysis with optimization. Volume 2 Part 1, Fighter design (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by P. Aidala, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, Grumman Aerospace Corporation, and Lockheed-Georgia Company (page images at HathiTrust)
• Computer program to perform aircraft design synthesis. Volume II, Technical volume (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by B. H. Oman, T. F. Reed, N. P. Karil, S. K. Pederson, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation. Convair Division (page images at HathiTrust)
• Numerical aircraft design using 3-D transonic analysis with optimization. Volume 1, Executive summary (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by Andrew J. Srokowski, P. Aidala, M. E. Lores, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, Grumman Aerospace Corporation, and Lockheed-Georgia Company (page images at HathiTrust)
• Numerical aircraft design using 3-D transonic analysis with optimization. Volume 3 Part 1, User's guide to transport design computer programs (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by R. A. Weed, Andrew J. Srokowski, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, Grumman Aerospace Corporation, and Lockheed-Georgia Company (page images at HathiTrust)
• Numerical aircraft design using 3-D transonic analysis with optimization. Volume 2 Part 1, Transport design (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by Andrew J. Srokowski, P. R. Simth, R. A. Weed, M. E. Lores, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, Grumman Aerospace Corporation, and Lockheed-Georgia Company (page images at HathiTrust)

• User's guide for a computer program for calculating the zero-lift wave drag of complex aircraft configurations (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Charlotte B. Craidon and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)

• Force method optimization II. Volume II, User's manual (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1982., 1982), by Batt J. R., S. Gellin, D. L. Witkop, S. C. Skalski, B. J. Dale, Air Force Wright Aeronautical Laboratories, Air Force Flight Dynamics Laboratory (U.S.), and Bell Aerospace Textron (page images at HathiTrust)
• Force method optimization II. Volume I, Theoretical development (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1982., 1982), by Batt J. R., R. A. Gellatly, S. Gellin, Air Force Wright Aeronautical Laboratories, Air Force Flight Dynamics Laboratory (U.S.), and Bell Aerospace Textron (page images at HathiTrust)

• Computer program to perform aircraft design synthesis. Volume II, Technical volume (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by B. H. Oman, T. F. Reed, N. P. Karil, S. K. Pederson, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation. Convair Division (page images at HathiTrust)

• Rapid evaluation of propulsion system effects. Volume III, Derivative procedure (DERIVP) users manual (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978., 1978), by T. E. Hickcox, W. H. Ball, R. A. Atkins, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), and Boeing Aerospace Company (page images at HathiTrust)

• Aerodynamic design and analysis system for supersonic aircraft (National Aeronautics and Space Administration ;, 1975), by W. D. Middleton, R. G. Coleman, J. L. Lundry, Langley Research Center, and Boeing Commercial Airplane Company (page images at HathiTrust)

• Aircraft design for mission performance using nonlinear multiobjective optimization methods (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division :, 1990), by Augustine R. Dovi, Gregory A. Wrenn, and Langley Research Center (page images at HathiTrust)
• Computer program to perform aircraft design synthesis. Volume II, Technical volume (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by B. H. Oman, T. F. Reed, N. P. Karil, S. K. Pederson, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation. Convair Division (page images at HathiTrust)

• An improved method for design of expansion-chamber mufflers with application to an operational helicopter (National Aeronautics and Space Administration ;, 1973), by Tony L. Parrott, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)

• A transonic-small-disturbance wing design methodology (National Aeronautics and Space Administration, Scientific and Technical Information Division ;, 1988), by Pamela S. Phillips, Richard L. Campbell, Edgar G. Waggoner, and Langley Research Center (page images at HathiTrust)
• WIDOWAC (Wing Design Optimization with Aeroelastic Constraints) : program manual (National Aeronautics and Space Administration ;, 1974), by Raphael T. Haftka, James H. Starnes, and Langley Research Center (page images at HathiTrust)
• Application of mathematical optimization procedures to a structural model of a large finite-element wing (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1986), by Joanne L. Walsh and Langley Research Center (page images at HathiTrust)
• Multilevel decomposition approach to the preliminary sizing of a transport aircraft wing (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division :, 1990), by Gregory A. Wrenn, Augustine R. Dovi, Langley Research Center, and Lockheed Engineering & Sciences Company (page images at HathiTrust)
• Automated procedure for design of wing structures to satisfy strength and flutter requirements (National Aeronautics and Space Administration ;, 1973), by Raphael T. Haftka and Langley Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• New Materials for Next-Generation Commercial Transports (1996), by National Research Council National Materials Advisory Board (page images with commentary at NAP)
• Stresses in Aircraft and Shell Structures (New York et al.: McGraw-Hill, 1956), by Paul Kuhn (page images at HathiTrust)
• Aircraft Lofting and Template Layout, With Descriptive Geometry (San Francisco: Aviation press, c1942), by Howard Thrasher (page images at HathiTrust)
• Aviation Safety and Pilot Control: Understanding and Preventing Unfavorable Pilot-Vehicle Interactions, by National Research Council Aeronautics and Space Engineering Board (page images and partial HTML at NAP)
• Aeroplane design (R. M. McBride & co., 1917), by F. S. Barnwell and William H. Sayers (page images at HathiTrust)
• Leitfaden der Flugtechnik. (J. Springer, 1913), by Siegmund Huppert (page images at HathiTrust; US access only)
• Comment on construit un aéroplane (Librairie aéronautique, 1909), by F. Robert Petit (page images at HathiTrust; US access only)
• Analysis and design of airplane structures. (Cincinnati, Ohio, 1943), by Elmer Franklin Bruhn (page images at HathiTrust)
• Constructions aéronautiques (aviation) (J.-B. Baillière et fils, 1921), by F. Robert Petit (page images at HathiTrust; US access only)
• Aviation handbook (McGraw-Hill book company, inc., 1931), by Edward Pearson Warner and S. Paul Johnston (page images at HathiTrust)
• Aeroplane structural design; a book for designers, draughtsmen & students (I. Pitman, 1920), by T. H. Jones and John Drummond Frier (page images at HathiTrust; US access only)
• How to build an aeroplane. (Williams and Norgate, 1910), by F. Robert Petit, John H. Ledeboer, and T. O'B. Hubbard (page images at HathiTrust; US access only)
• La construction des avions par m. Suffrin Hébert ... (E. Chiron, 1926), by Jules Justin Maurice Suffrin-Hébert and Jules Jarry (page images at HathiTrust; US access only)
• Elementary aircraft structures (Lithoprinted by Edwards brothers, inc.], 1943), by Millard V. Barton (page images at HathiTrust)
• Aero-space applied thermodynamics manual. (Society of Automotive Engineers, Committee A-9: Aero-space Environmental Control Systems, 1962), by Society of Automotive Engineers (page images at HathiTrust; US access only)
• Airplane construction and repair : a textbook for airplane mechanics (McGraw-Hill book company, inc., 1931), by John E. Younger and Nairne Forsyth Ward (page images at HathiTrust; US access only)
• Manuel de l'aviateur-constructeur (H. Dunod et E. Pinat, 1910), by Mario Calderara and P. Banet-Rivet (page images at HathiTrust; US access only)
• Aircraft construction handbook (Thomas Y. Crowell company, 1943), by Thomas Albert Dickinson (page images at HathiTrust)
• Minimum weight analysis of compression structures. (New York University Press;, 1956), by George Gerard (page images at HathiTrust; US access only)
• Practical analytic geometry with applications to aircraft (Macmillan, 1944), by Roy A. Liming and Leo Hudson (page images at HathiTrust)
• How to do aircraft sheetmetal work (McGraw-Hill, 1942), by Carl Norcross and James D. Quinn (page images at HathiTrust; US access only)
• Basic science for aerospace vehicles. (McGraw, 1963), by Northrop Institute of Technology and James L. McKinley (page images at HathiTrust)
• Airplane metal work ... (D. Van Nostrand Company, inc., 1940), by Alex M. Robson (page images at HathiTrust)
• The shape of the aeroplane (Roy Publishers, 1953), by James Hay Stevens (page images at HathiTrust)
• Airplane design manual (Pitman publishing corporation, 1939), by Frederick K. Teichmann (page images at HathiTrust)
• Airplane design manual. (Pitman, 1958), by Frederick K. Teichmann (page images at HathiTrust)
• Aircraft design through service experience. (U. S. Govt. Print. Off., 1953), by United States. Civil Aeronautics Administration (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with examples and problems. (College of engineering, Cornell university, 1935), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations, with emphasis on the economics of design. (Boulder, Colo., 1947), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations (Boulder, Colo., 1949), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook and handbook on airplane and helicopter layout and preliminary design calculations (The author;, 1954), by Karl Dawson Wood (page images at HathiTrust)
• Aerospace vehicle design. (Johnson Pub. Co., 1963), by Karl Dawson Wood (page images at HathiTrust)
• Airplane lofting (McGraw-Hill, 1941), by William Nelson (page images at HathiTrust)
• Aircraft production methods (Chilton, 1956), by Gordon Ashmead (page images at HathiTrust)
• Manual of aircraft production (McGraw-Hill book company, inc., 1943), by Bernard H. De Selm (page images at HathiTrust; US access only)
• Standard aircraft handbook (Aero Publishers, 1952), by Stuart Leavell and Stanley Bungay (page images at HathiTrust)
• Aircraft processes (The Crocker company, 1941), by Sydney H. Phillips (page images at HathiTrust)
• Aircraft production design (Aviation press, 1945), by James E. Thompson (page images at HathiTrust)
• Aircraft mechanic's pocket manual (Pitman publishing corporation, 1944), by Joseph Albert Ashkouti and Alexander Klemin (page images at HathiTrust)
• Aircraft sheet metal work; bench and repair work (Pitman Pub. Corp., 1941), by Harry Edward Boggess and Alexander Klemin (page images at HathiTrust)
• Aircraft sheet metal construction and repairs for aircraft mechanics and sheet metal workers (F. J. Drake & co., 1942), by M. P. Harrold (page images at HathiTrust)
• Aircraft riveting; a guide for the student (Pitman publishing corporation, 1942), by Lear. Earl Bean and James Edward Dillon (page images at HathiTrust)
• The aircraft apprentice (Pitman publishing corporation, 1942), by Leslie MacGregor (page images at HathiTrust)
• Manual of aircraft riveting; a practical handbook dealing with methods used in aircraft construction and repairs (McGraw-Hill book company, inc., 1943), by Marvin G. Roth (page images at HathiTrust; US access only)
• Aircraft torch welding (Pitman publishing corporation, 1941), by Charles Von Borchers and Assaf Ciffrin (page images at HathiTrust)
• Airframe and powerplant mechanics examination guide. (U. S. Govt. Print. Off., 1963), by United States. Flight Standards Service and United States. Civil Aeronautics Administration (page images at HathiTrust)
• Aircraft detail drafting (McGraw-Hill book company, inc., 1942), by Norman Meadowcroft (page images at HathiTrust; US access only)
• The aviation mechanic (McGraw-Hill book company, inc., 1941), by Carl Norcross and James D. Quinn (page images at HathiTrust; US access only)
• Structural analysis and design of airplanes. ([Washington, 1920), by United States. Army. Air Corps (page images at HathiTrust)
• Supersonic and subsonic airplane design. (College Park, Md., 1953), by Gerald Corning (page images at HathiTrust)
• Aircraft assembly and aircraft hydraulics project manual. (Educational Publishers, 1949), by Walter C Shelton (page images at HathiTrust)
• Structural design of metal airplanes (McGraw-Hill book company, inc., 1935), by John E. Younger, Nairne Forsyth Ward, and Raymond Howell Rice (page images at HathiTrust)
• Ship and aircraft fairing and development, for draftsmen and loftsmen and sheet metal workers (Cornell maritime press, 1941), by S. S. Rabl (page images at HathiTrust; US access only)
• Hilfsbuch für den flugzeugbau. (R. C. Schmidt & co.;, 1913), by O. L. Skopik (page images at HathiTrust; US access only)
• Handbuch für flugzeug-konstrukteure. (R. C. Schmidt & co., 1917), by Camillo Haffner (page images at HathiTrust; US access only)
• Wie berechnet, konstruiert und baut man ein flugzeug? (R. C. Schmidt & co.;, 1912), by O. L. Skopik (page images at HathiTrust; US access only)
• Mechanische grundlagen des flugzeugbaues (R. Oldenbourg, 1913), by Alexander Baumann (page images at HathiTrust; US access only)
• Design of wood aircraft structures (Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria, Munitions Board, Aircraft Committee, 1951), by Forest Products Laboratory (U.S.) and United States. Munitions Board. Aircraft Committee. Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria (page images at HathiTrust)
• Climatic and environmental criteria for aircraft design. (U.S. Govt. Print. Off.], 1952), by United States. Munitions Board. Aircraft Committee. Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria (page images at HathiTrust)
• Sandwich construction for aircraft; ANC-23 bulletin. (Dep. of the Air Force, Air Research and Development Command, 1955), by Forest Products Laboratory (U.S.) and United States. ANC-23 Panel on Sandwich Construction for Aircraft (page images at HathiTrust)
• Der eindecker und sein bau (C. J. E. Volckmann nachf. g. m. b. h., 1916), by C. Vogelsang (page images at HathiTrust; US access only)
• Design analysis of wide-body aircraft report (U.S. Govt. Print. Off., 1980), by United States. Congress. House. Committee on Science and Technology. Subcommittee on Investigations and Oversight (page images at HathiTrust)
• Fighter facts and fallacies (W. Morrow and Company, 1942), by John Glessner Lee (page images at HathiTrust)
• Aircraft woodwork (The Macmillan Company, 1946), by Rollen H. Drake (page images at HathiTrust)
• Magnesium in aerospace design. (Dow Metal products, Division of the Dow Chemical Co., 1963), by Dow Chemical Company (page images at HathiTrust)
• Aircraft engines. (War Dept., 1940), by United States War Department (page images at HathiTrust)
• Ground observers' guide. (Dept. of the Air Force, 1951), by United States Department of the Air Force (page images at HathiTrust)
• Bending stresses due to torsion in cantilever box beams (National Advisory Committee for Aeronautics, 1935), by Paul Kuhn and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Aeroplane structure (Longmans, Green and Co., 1919), by Alfred John Sutton Pippard and John Laurence (page images at HathiTrust; US access only)
• Airplane design manual (Pitman publishing corporation, 1942), by Frederick K. Teichmann (page images at HathiTrust)
• Aircraft analytic geometry applied to engineering, lofting, and tooling (McGraw-Hill, 1944), by J. J. Apalategui and Lovincy J. Adams (page images at HathiTrust; US access only)
• Aircraft sheet metal blueprint reading (American technical society, 1944), by Harry Herschell Coxen, Gilbert D. Master, Gerald E. Jackson, and American Technical Society (page images at HathiTrust)
• Aircraft template development, compiled and edited by Aero publishers, and associated aeronautical staff under supervision of staff engineer Ernest J. Gentle. (Aero publishers, 1942), by inc Aero Publishers and Ernest J. Gentle (page images at HathiTrust)
• Aircraft blueprint reading (Pitman Pub. Corp., 1940), by H. V. Almen and Ralph Keller Mead (page images at HathiTrust)
• Flugzeugbaukunde : eine Einfuhrung in die Flugtechnik (J. Springer, 1924), by H. G. Bader (page images at HathiTrust; US access only)
• Analysis and design of airplane structures (Printed and distributed by Tri-state offset co., 1944), by E. F. Bruhn (page images at HathiTrust)
• Aero-economics. (California Institute of Technology, 1945), by James B. Kendrick (page images at HathiTrust)
• Aircraft assembly (Pitman publishing corporation, 1942), by Charles Fortney Marschner (page images at HathiTrust)
• Basic aircraft construction; plain facts for plane builders (Prentice-Hall, 1943), by Ross A. Peterson and Raymond E. Erickson (page images at HathiTrust)
• Airplane design; performance. (McGraw-Hill, 1936), by Edward Pearson Warner (page images at HathiTrust; US access only)
• Hilfsbuch für den Luftschiff- und Flugmaschinenbau; eine übersichtliche Darstellung der Verschiedenen Konstruktionen, sowie Anleitung zum bau und zur Berechnung der Leistungen und des Wirkungsgrades von Luftschiffen, Flugmaschinen aller Art und von Treibschrauben (C.J.E. Volckmann nachfolger (E. Wette), 1910), by R. Wegner von Dallwitz (page images at HathiTrust; US access only)
• Aircraft engine drafting room practice. (Society of automotive engineers, inc., 1942), by Society of Automotive Engineers (page images at HathiTrust)
• Airplane design manual. (Pitman, 1950), by Frederick K. Teichmann (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and stress analysis calculations, with particular emphasis on economics of design. (The author;, 1941), by Karl Dawson Wood (page images at HathiTrust)
• Aircraft tooling practices (Pitman publishing corporation, 1944), by James Ralph Yeakley, Alexander Klemin, and Harold Clifford Martin (page images at HathiTrust)
• Aeroplane design (McBride, Nast & Co., 1916), by Frank Sowter Barnwell and William H. Sayers (page images at HathiTrust; US access only)
• Aircraft torch welding (Pitman, 1942), by Charles Von Borchers and Assaf Ciffrin (page images at HathiTrust)
• Aeroplane construction and operation : including notes on aeroplane design and aerodynamic calculation, materials, etc. (Stanton and Van Vliet, 1919), by John B. Rathbun (page images at HathiTrust)
• Airplane structures (U.S. Govt. print. off., 1945), by United States Bureau of Naval Personnel and United States. Navy. Naval air technical training command (page images at HathiTrust)
• Aircraft metal work. (U.S. Govt. Print. Off., 1945), by United States Bureau of Naval Personnel and United States. Naval Air Technical Training Command (page images at HathiTrust)
• Aircraft blueprint reading (Pitman publishing corporation, 1942), by H V. Almen and Ralph Keller Mead (page images at HathiTrust)
• Handbuch für Flugzeug-Konstrukteure (R. C. Schmidt & Co., 1922), by Camillo Haffner and Erich Osterland (page images at HathiTrust; US access only)
• The theory & practice of aeroplane design (E.P. Dutton & Company, 1920), by Sydney Thomas Giles Andrews and Sydney Frederick Benson (page images at HathiTrust)
• Airplane design graphs for performance and maneuverability (Airplane Engine Encyclopedia Co., 1922), by W. F. Gerhardt, M. L. Snodgrass, and F. W. Herman (page images at HathiTrust)
• Der bau des flugzeuges (C. J. E. Volckmann, nachf. g. m. b. h., 1927), by Edmund Pfister and Herbert Eschke (page images at HathiTrust; US access only)
• The design of aeroplanes (J. Selwyn & co., 1917), by Arthur William Judge (page images at HathiTrust; US access only)
• Aeroplane construction and operation; including notes on aeroplane design and aerodynamic calculation, materials, etc. A comprehensive illustrated manual of instruction for aeroplane constructors, aviators, aero-mechanics, flight officers and students. Adapted either for schools or home study. (Stanton and Van Vliet Co., 1918), by John B. Rathbun (page images at HathiTrust)
• Airplane design; aerodynamics. (McGraw-Hill book company, inc., 1927), by Edward Pearson Warner (page images at HathiTrust)
• A study in computer aided aerospace vehicle design (Naval Undersea Research and Development Center, 1969), by Dale Eugene Calkins and Naval Undersea Research and Development Center (page images at HathiTrust)
• Handbook of instructions for airplane designers (Engineering Div.-Air Service, 1921), by United States. Engineering Division. Air Service (page images at HathiTrust)
• [Instructions for assembling aeroplanes. (n.p., 1918), by Naval Air Station Pensacola (Fla.) (page images at HathiTrust; US access only)
• Technische Berichte : TB (s.n.], 1917), by Germany. Inspektion der Fliegertruppen. Flugzeugmeisterei (page images at HathiTrust; US access only)
• Suggested outlines for shop talks on inspection. (Albany, 1943), by University of the State of New York. Bureau of Industrial and Technical Education (page images at HathiTrust)
• Suggested unit course in assembly for beginners in aircraft metal work ... (The University of the state of New York, the state education dept., Bureau of industrial and technical education, 1942), by New York (State). Bureau of industrial and technical education and United States Office of Education (page images at HathiTrust)
• Suggested laboratory course, inspection practice; aircraft manufacture. Unit A-C. (Albany, 1941), by University of the State of New York. Bureau of Industrial and Technical Education (page images at HathiTrust)
• USAF damage tolerant design handbook : guidelines for the analysis and design of damage tolerant aircraft structures : final report for period September 1980 to March 1984 (Flight Dynamics Laboratory, Air Force Wright Aeronautical Labortories ;, 1984), by J. P. Gallagher and United States Air Force (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design. (The author;, 1939), by Karl Dawson Wood (page images at HathiTrust)
• Standard aircraft worker's manual. (Fletcher Aircraft schools, 1941), by Fletcher Aircraft Schools and Stuart Leavell (page images at HathiTrust)
• Suggested unit course in riveting for beginners in aircraft metal work. (Albany, 1941), by University of the State of New York. Bureau of Industrial and technical Education (page images at HathiTrust)
• Suggested unit course in fabrication for beginners in aircraft metal work. (Albany, 1942), by University of the State of New York. Bureau of Industrial and Technical Education (page images at HathiTrust)
• Analysis and design of aircraft structures (Reproduced and distributed by Tri-State Offset Co., 1958), by E. F. Bruhn (page images at HathiTrust; US access only)
• Composite construction for flight vehicles. (Armed Forces Supply Support Center, 1959), by United States Department of Defense (page images at HathiTrust)
• Maintenance, repair and alteration of certified aircraft, aircraft engines, propellers and instruments. (Washington, 1941), by United States. Civil Aeronautics Administration (page images at HathiTrust)
• Suggested plan for organization and operation. Laboratory course in inspection practice for aircraft manufacture. (Albany, 1942), by University of the State of New York. Bureau of Industrial and Technical Education (page images at HathiTrust)
• Investigation of the compressive strength of spruce struts of rectangular cross section and the derivation of formulas suitable for the use in airplane design (U.S. Dept. of Commerce, Bureau of Standards :, 1920), by James E. Boyd and United States. National Bureau of Standards (page images at HathiTrust)
• Sandwich construction for aircraft. (Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria, Munitions Board Aircraft Committee, 1951), by Forest Products Laboratory (U.S.) and United States. Munitions Board. Aircraft Committee. Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria (page images at HathiTrust)
• Development of a power-spectral gust design procedure for civil aircraft (Lockheed-California Co., 1966), by Frederic M Hoblit and United States. Federal Aviation Agency. Aviation Research and Development Service (page images at HathiTrust)
• Stall recovery and stall warning instrumentation in a light airplane (National Research Council, Committee on Aviation Psychology, 1950), by Phillip J. Rulon (page images at HathiTrust)
• Handbook of strength calculations. (H.M. Stationery Off., 1928), by Great Britain. Air Ministry (page images at HathiTrust)
• Monoplane und praktische Erfahrungen im Bau von Flugmaschinen nebst Beschreibung der wichtigsten Flugmotoren (C. J. E. Volckmann Nachfolger (E. Wette), 1910), by Friedrich Hansen (page images at HathiTrust; US access only)
• Sandwich construction for aircraft : ANC-23 bulletin (Dept. of the Air Force, Air Research and Development Command, 1955), by Forest Products Laboratory (U.S.) and United States. ANC-23 Panel on Sandwich Construction for Aircraft (page images at HathiTrust)
• Flight operating difference/supplemental data : Navy models A-4F and TA-4J aircraft (Douglas Aircraft Company, Long Beach, Calif. 90846), N00019-73-A-0242, N00600-76-D-0596 : naval flight demonstration squadron aircraft configuration. (Issued by authority of the Chief of Naval Operations and under direction of the Commander, Naval Air Systems Command, 1976), by United States. Naval Air Systems Command (page images at HathiTrust)
• Materials and structures/ACEE. (National Aeronautics and Space Administration :, 1981), by United States National Aeronautics and Space Administration (page images at HathiTrust)
• Exploratory study of the effects of wing-leading-edge modifications on the stall/spin behavior of a light general aviation airplane (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by Langley Research Center and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Parametric study of variation in cargo-airplane performance related to progression from current to spanloader designs (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1980), by Thomas A. Toll, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Flight investigation of the effect of tail configuration on stall, spin, and recovery characteristics of a low-wing general aviation research airplane (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1987), by H. Paul Stough, Steven M. Sliwa, James M. Patton, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Emergency in-flight egress opening for general aviation aircraft (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1980), by Laurence J. Bement, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Concept development of a Mach 3.0 high-speed civil transport (National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by A. Warner Robins and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Experimental effects of fuselage camber on longitudinal aerodynamic characteristics of a series of wing-fuselage configurations at a mach of 1.41 (U.S. National Aeronautics and Space Administration ;, 1976), by Samuel M. Dollyhigh, Mary S. Adams, Odell A. Morris, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Flutter clearance of the horizontal tail of the Bellanca Skyrocket II airplane (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Rodney H. Ricketts, Moses G. Farmer, F. W. Cazier, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Spin tests of a single-engine, high-wing light airplane (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Eric C. Stewart, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Parametric study of microwave-powered high-altitude airplane platforms designed for linear flight (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Charles E. K. Morris, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Vehicle concepts and technology requirements for buoyant heavy-lift systems (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Mark D. Ardema and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Planar equations of rollout motion for an aircraft with free or steerable landing gears (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Robert K. Sleeper, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Dynamics and identification on flexible aircraft (U.S. National Aeronautics and Space Administration ;, 1976), by William R. Wells, United States National Aeronautics and Space Administration, and University of Cincinnati. Dept. of Aerospace Engineering (page images at HathiTrust)
• A study of NACA and NASA published information of pertinence in the design of light aircraft. Volume III, Propulsion subsystems, performance, stability and control, propellers, and flight safety (National Aeronautics and Space Administration ;, 1970), by Clifford J. Moore, Dennis M. Phillips, Langley Research Center, and North Carolina State University. Dept. of Mechanical and Aerospace Engineering (page images at HathiTrust)
• Analytical study of a free-wing/free-trimmer concept (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Richard F. Porter, Battelle Memorial Institute. Columbus Laboratories, Hugh L. Dryden Flight Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Subsonic panel method for designing wing surfaces from pressure distribution (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by D. R. Bristow, J. Dennis Hawk, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Integrated application of active controls (IACC) technology to an advanced subsonic transport : project plan (National Aeronautics and Space Admininstration, Scientific and Technical Information Branch ;, 1981), by Boeing Commercial Airplane Company, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Fatigue behavior of a fusion welded ti-8Al-1Mo-1V simulated wing structure under the environment of a supersonic transport (National Aeronautics and Space Administration, 1967), by John J. Peterson (page images at HathiTrust; US access only)
• Extended analytical study of the free-wing/free-trimmer concept (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by Richard F. Porter, Rodolfo D. Vergara, David W. Hall, Battelle Memorial Institute. Columbus Laboratories, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, and Hugh L. Dryden Flight Research Center (page images at HathiTrust)
• The Design of aircraft using the decision support problem technique (National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by Farokh Mistree and Langley Research Center (page images at HathiTrust)
• NASA TR R-57 (National Aeronautics and Space Administration ;, 1960), by A. I. Neihouse, Stanley H. Scher, Walter J. Klinar, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Wind-tunnel lift interference on sweptback wings in rectangular test sections with slotted top and bottom walls (National Aeronautics and Space Administration, 1966), by Ray H. Wright and Raymond L. Barger (page images at HathiTrust; US access only)
• Stability of elastic bending and torsion of uniform cantilever rotor blades in hover with variable structural coupling (National Aeronautics and Space Administration ;, 1976), by Dewey H. Hodges, Robert A. Ormiston, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Analysis of frame-reinforced cylindrical shells (National Aeronautics and Space Administration, 1960), by Richard H. MacNeal and John A. Bailie (page images at HathiTrust)
• NASA TN D-6656 (National Aeronautics and Space Administration :, 1972), by Irving Abel, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4664 (National Aeronautics and Space Administration ;, 1968), by Joseph W. Stickle, Robert C. Henry, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A method for estimating some longitudinal and lateral rigid-body responses of airplanes to continuous atmospheric turbulence (National Aeronautics and Space Administration, 1971), by Ellwood L. Peele, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Studies of optimum body shapes at hypersonic speeds (National Aeronautics and Space Administration, 1967), by Louis S. Stivers, Bernard Spender, Langley Research Center, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Preliminary evaluation of XB-70 airplane encounters with high-altitude turbulence (National Aeronautics and Space Administration, 1967), by Eldon E. Kordes, Betty J. Love, Flight Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1942), by Robert Gottlieb, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1942), by Robert Gottlieb, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1944), by Eugene E. Lundquist, W. D. Kroll, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1945), by Joseph N. Kotanchik, Robert A. Weinberger, Walter Woods, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1944), by George J. Heimerl, J. Albert Roy, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1945), by S. B. Batdorf, John C. Houbolt, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1946), by S. B. Batdorf, Charles Libove, Manuel Stein, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1942), by Robert Gottlieb, Merven W. Mandel, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• A theoretical investigation of the drag of generalized aircraft configurations in supersonic flow (NACA, 1957), by E. W. Graham and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Autogenous welding in airplane construction (NACA, 1929), by Ludwig Kuchel and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• The design of aeroplanes. (I. Pitman, 1917), by Arthur William Judge (page images at HathiTrust; US access only)
• Moderne Flugmaschinen; Forderungen, die Theorie und Praxis an die Konstruktion moderner Flugmaschinen stellen, und die art ihrer Erfüllung bei den neuesten Französischen Land- und Wasserfluzeugen (Klasing & co., g.m.b.h., 1913), by Alfred Marcel Joachimczyk (page images at HathiTrust; US access only)
• Luftfahrzeugbau, Konstruktion von Luftschiffen und Flugmaschinen (M. Krayn, 1909), by Fritz Huth (page images at HathiTrust; US access only)
• Luftfahrzeugbau; construktion von luftschiffen und flugmaschinen (M. Krayn, 1910), by Fritz Huth (page images at HathiTrust; US access only)
• Analytical modeling of transport aircraft crash scenarios to obtain floor pulses (Federal Aviation Administration, Systems Research and Development Service] ;, 1983), by Dave Lackey, Gil Wittlin, Federal Aviation Administration Technical Center (U.S.), United States National Aeronautics and Space Administration, United States. Federal Aviation Administration. Systems Research and Development Service, and Lockheed-California Company (page images at HathiTrust)
• The effect of high solidity on propeller characteristics at high forward speeds from wind-tunnel tests of the NACA 4-(3)(06.3)-06 and NACA 4-(3)(06.4)-09 two-blade propellers (National Advisory Committee for Aeronautics, 1947), by James B. Delano, United States. National Adviosry Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• Aerodynamic characteristics at high speeds of full-scale propellers having different shank designs (National Advisory Committee for Aeronautics, 1947), by Julian D. Maynard, United States. National Adviosry Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• Effect of some present-day airplane design trends on requirements for lateral stability (National Advisory Committee for Aeronautics ;, 1941), by M. J. Bamber and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Construction des aéroplanes; résistance des matériaux. (Librairie Aéronautique, 1917), by François Orain (page images at HathiTrust; US access only)
• Longitudinal characteristics of wings (National Advisory Committee for Aeronautics, 1958), by Thomas A. Toll (page images at HathiTrust)
• Recent design studies directed towards elimination of pitch-up (National Advisory Committee for Aeronautics, 1958), by Joseph Weil and W. H. Gray (page images at HathiTrust)
• Building and flying an aeroplane : a practical handbook covering the design, construction, and operation of aeroplanes and gliders (American Technical Society, 1918), by American Technical Society and Charles B. Hayward (page images at HathiTrust)
• Aeroplane design (1916), by S. J. Twining (page images at HathiTrust; US access only)
• Aircraft engineering for pilots. (Washington, 1955), by United States Department of the Air Force (page images at HathiTrust; US access only)
• Aircraft fabrication : cast and molded dies. (Scranton, Pa., 1943), by International Textbook Company (page images at HathiTrust; US access only)
• Preliminary study of applied load factors in bumpy air (National Advisory Committee for Aeronautics ;, 1931), by Richard V. Rhode, Eugene E. Lundquist, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Bibliography of aeronautics : Part 31: metal construction of aircraft ([s.n.], 1937), by United States. Work Projects Administration and Institute of the Aeronautical Sciences (U.S.) (page images at HathiTrust; US access only)
• Problems in drafting & design. (McKnight & McKnight, 1947), by Francis L. Goff (page images at HathiTrust; US access only)
• Handbook of instructions for aircraft designers. ([Andrews Air Force Base, Md.], 1955), by United States. Air Force. Air Research and Development Command (page images at HathiTrust)
• Military handbook of aircraft extruded shapes and dies. (U. S. Govt. Print. Off., 1959), by United States Department of Defense (page images at HathiTrust)
• A study of means for rationalizing airplane design loads (Washington, D.C. : National Advisory Committee for Aeronautics, 1955., 1955), by John P. Mayer, Harold A. Hamer, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Some factors affecting the variation of pitching moment with sideslip of aircraft configurations (Washington, D.C. : National Advisory Committee for Aeronautics, 1955., 1955), by Edward C. Polhamus, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Aircraft production : a practical survey of materials and processes used in the construction of modern aircraft. Intended for all engaged in aircraft factories and assembly shops (Chemical Pub. Co., 1941), by Edward Molloy (page images at HathiTrust; US access only)
• Aeroplane design : a paper (Institution of Aeronautical Engineers, 1922), by H. P. Folland (page images at HathiTrust; US access only)
• Airframe and powerplant mechanics: examination guide (Washington], 1958), by United States. Civil Aeronautics Administration (page images at HathiTrust; US access only)
• Development of crash-resistant aircraft flammable fluid systems, part I : the effect of temperature on the strength of bladder-type fuel-cell materials (National Aviation Facilities Experimental Center, 1959), by Robert R. Rodgers, David A. Hillman, and National Aviation Facilities Experimental Center (U.S.) (page images at HathiTrust)
• Airplane drafting (International Textbook Co., 1940), by Daniel J. Brimm (page images at HathiTrust; US access only)
• Aircraft mechanic's pocket manual (Pitman publishing corporation, 1941), by Joseph Albert Ashkouti (page images at HathiTrust; US access only)
• Fundamentals of aircraft drafting; a specialized course in the fundamentals of drawing primary structures of aircraft with some characteristic details, designed to be related to other aeronautical courses (Printed by students at Delgado trades school, 1941), by Robert Brydon (page images at HathiTrust; US access only)
• Airplane design (The author, 1943), by K. D. Wood (page images at HathiTrust; US access only)
• Design information for aircraft. (Washington : United States Government Printing Office, 1934., 1934), by United States. Bureau of Air Commerce (page images at HathiTrust)
• Development of civilian aircraft adaptable to auxiliary military service. : Hearings before a subcommittee of the Committee on Interstate and Foreign Commerce, United States Senate, Eightieth Congress, second session, on S. 2644 ... May 18, 21, 1948. (U.S. Govt. Print. Off, 1948), by United States Senate Committee on Interstate and Foreign Commerce (page images at HathiTrust)
• Aircraft woodwork, protective coatings (International textbook company, 1939), by Daniel J. Brimm (page images at HathiTrust; US access only)
• Practical aeronautical engineering (Aviation press, 1938), by Willis L. Nye (page images at HathiTrust; US access only)
• A computer program to obtain time-correlated gust loads for nonlinear aircraft using the matched-filter-based method (Federal Aviation Administration Technical Center ;, 1994), by Robert C. Scott, Boyd Perry, Anthony S. Pototzky, Langley Research Center. Aeroelasticity Branch, and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)
• Stall/spin/flight simulation (Federal Aviation Administration Technical Center ;, 1989), by M. G. Nagati, Wichita State University. Institute for Aviation Research, and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)
• Structural weight analysis; general method: wing structures. (Rand Corp., 1949), by F. R. Shanley and Rand Corporation (page images at HathiTrust; US access only)
• Composite construction for flight vehicles : [with list of referenced documents.]. ([Washington, D.C.], 1960), by United States Department of Defense (page images at HathiTrust)
• Annual report on research for use in ANC-17 bulletin "Plastics For Aircraft" (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by Donald G. Coleman, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Prediction of human tolerance for heat in aircraft: a design guide (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1954., 1954), by W. V. Blockley, Craig L. Taylor, J. W. McCutchan, United States. Air Force. Air Research and Development Command, Wright Air Development Center, Aerospace Medical Laboratory (U.S.), and Los Angeles University of California (page images at HathiTrust)
• Aircraft lofting (E.P. Grenier, 1941), by Emile P. Grenier (page images at HathiTrust; US access only)
• Wind tunnel test of an AFFDL Tactical High Altitude Penetrator (THAP) air vehicle configuration (Wright-Patterson Air Force Base : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, 1978., 1978), by Russel F. Osborn, Charles R. Gallaway, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Development of brazed sandwich construction materials for high temperature applications (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1958., 1958), by Charles F. Burrows, F. J. Ragland, United States. Air Force. Air Research and Development Command, Martin Company, and Wright Air Development Center (page images at HathiTrust)
• Prediction of creep effects in aircraft structures (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1961), by General Dynamics Corporation. Convair Division and C. W. Alesch (page images at HathiTrust)
• Initial quality of advanced joining concepts (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1984., 1984), by W. R. Garver, K. M. Koepsel, D. Y. Lee, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and General Dynamics Corporation. Fort Worth Division (page images at HathiTrust)
• Investigation of high-AOA flying qualities : criteria and design guides (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by Donald D. Johnston, Robert K. Heffley, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Inc Systems Technology (page images at HathiTrust)
• Jobs in the aircraft industry (Science research associates, 1943), by Albert Theodore Helbing and Chicago Science Research Associates (page images at HathiTrust; US access only)
• Thermo-structural analysis manual. Volume I (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962., 1962), by H. Switzky, M. Noiman, Marvin J. Forray, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Republic Aviation Corporation (page images at HathiTrust)
• Thermo-structural analysis manual. Volume II (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962., 1962), by Marvin J. Forray, M. Noiman, H. Switzky, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Republic Aviation Corporation (page images at HathiTrust)
• Improved methodology for advanced aircraft design (Wright Patterson Air Force Base, Ohio : Air Vehicles Directorte, Air Force Research Laboratory, Air Force Materiel Command, 2004., 2004), by William A. Crossley, Purdue University. School of Aeronautics and Astronautics, and Ohio). Air Vehicles Directorate Air Force Research Laboratory (Wright-Patterson Air Force Base (page images at HathiTrust)
• Shop training (American Technical Society, 1945), by John T. Shuman, Walter W. Monroe, and Bailey Ayers Wright (page images at HathiTrust; US access only)
• Stresses in skin panels subjected to random acoustic loading (Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, 1967), by Brian L. Clarkson, University of Southampton, and Wright-Patterson Air Force Base (Ohio) (page images at HathiTrust; US access only)
• A computational examination of directional stability for smooth and chined forebodies at high-[alaph] (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Ramakrishnan Ravi, William H. Mason, United States. National Aeronautics and Space Administration. Scientific and Technical Information Program, and Langley Research Center (page images at HathiTrust)
• Euler technology assessment program for preliminary aircraft design employing SPLITFLOW code with cartesian unstructured grid method (National Aeronautics and Space Administration, Langley Research Center, 1995), by Dennis B. Finley and Langley Research Center (page images at HathiTrust)
• Design optimization of natural laminar flow bodies in compressible flow (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993), by Simha S. Dodbele, Langley Research Center, and Inc ViGYAN (page images at HathiTrust)
• Euler technology assessment for preliminary aircraft design employing OVERFLOW code with multiblock structured-grid method (National Aeronautics and Space Administration, Langley Research Center ;, 1995), by David A. Treiber, Dennis A. Muilenburg, and Langley Research Center (page images at HathiTrust)
• Recent advances in multidisciplinary analysis and optimization : proceedings of a symposium cosponsored by NASA Langley Research Center, NASA Lewis Research Center, and the Wright Research Development Center, and held in Hampton, Virginia, September 28-30, 1988 (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989), by Jean-Francois M. Barthelemy, Wright Research Development Center, Lewis Research Center, Langley Research Center, and Va.) NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization (2nd : 1988 : Hampton (page images at HathiTrust)
• Space as a factor in aircraft design (Catholic University of America Press, 1957), by Vincent James Berinati (page images at HathiTrust; US access only)
• Instructions in aircraft welding ; oxyacetylene (exercises) . (New York, N.Y. : Air Reduction, [1940], 1940), by Air Reduction Company (page images at HathiTrust; US access only)
• Aeroplane construction : A handbook on the various methods and details of construction employed in the building of aeroplanes, by Sydney Camm (Gutenberg ebook)

More items available under broader and related terms at left.