Airplanes -- Turbojet engines -- Cooling -- Congresses
See also what's at your library, or elsewhere.
Broader terms:Narrower term:![[X-Info]](https://onlinebooks.library.upenn.edu/infouc.gif)
NACA Conference on Turbine Materials and Cooling : a compilation of the papers presented, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, March 15, 1951 (NACA, 1951), by Ohio) NACA Conference on Turbine Materials and Cooling (1951 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- NACA Conference on Turbine Cooling : a compilation of the papers presented by NACA staff members, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, November 9, 1949 (NACA, 1949), by Ohio) NACA Conference on Turbine Cooling (1949 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
Items below (if any) are from related and broader terms.
Filed under: Airplanes -- Turbojet engines -- Cooling- Cold-air performance of a 12.766-centimeter-tip-diameter axial-flow cooled turbine : II - effect of air ejection on turbine performance (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1977), by Jeffrey E. Haas, Milton G. Kofskey, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
- Flow visualization of film cooling with spanwise injection from a small array of holes and compound-angle injection from a large array (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Louis M. Russell and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
- Heat-transfer characteristics of partially film coded plug nozzle on a J-85 afterburning turbojet engine (U.S. National Aeronautics and Space Administration ;, 1976), by Stanley M. Nosek, David M. Straight, and Lewis Research Center (page images at HathiTrust)
- Endurance evaluation of shell-supported turbine rotor blades made of timken 17-22A (S) steel (National Advisory Committee for Aeronautics, 1951), by Francis S. Stepka, John L. Clure, H. Robert Bear, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Engine design-point performance (National Advisory Committee for Aeronautics, 1954), by James E. Hubbartt, Wilson B. Schramm, R. J. Rossbach, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Experimental cooling-air impeller performance and turbine rotor temperatures in modified J33 split-disk rotor up to speeds of 10,000 RPM (National Advisory Committee for Aeronautics, 1952), by Alfred J. Nachtigall, Robert R. Ziemer, Charles F. Zalabak, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Effects of special leading- and trailing-edge modifications on blade temperature (National Advisory Committee for Aeronautics, 1951), by Herman H. Ellerbrock, Gordon T. Smith, Charles F. Zalabak, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Rotor blades with 34 steel tubes in cooling-air passages (National Advisory Committee for Aeronautics, 1950), by Robert O. Hickel, Gordon T. Smith, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Endurance evaluation of several tube-filled rotor blades (National Advisory Committee for Aeronautics, 1952), by Jack B. Esgar, John L. Clure, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Conduction and film cooling of leading and trailing edges of rotor blades (National Advisory Committee for Aeronautics, 1951), by Vernon L. Arne, Jack B. Esgar, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Rotor blades with split trailing edges (National Advisory Committee for Aeronautics, 1951), by Gordon T. Smith, Robert O. Hickel, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
- Experimental investigation of external water-spray cooling in a turbojet engine utilizing several injection configurations including orifices in the rotor-blade bases (National Advisory Committee for Aeronautics, 1955), by Roy A. McKinnon, John C. Freche, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Fabrication and endurance of air-cooled strut-supported turbine blades with struts cast of X-40 alloy (National Advisory Committee for Aeronautics, 1956), by Eugene F. Schum, Robert E. Oldrieve, Francis S. Stepka, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics (page images at HathiTrust)
- Analytical and experimental investigation of a forced-convection air-cooled internal strut-supported turbine blade (National Advisory Committee for Aeronautics, 1954), by Eugene F. Schum, Francis S. Stepka, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Static sea-level performance of an axial-flow-compressor turbojet engine with an air-cooled turbine (National Advisory Committee for Aeronautics, 1955), by Reeves P. Cochran, Robert P. Dengler, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Potential use of ceramic coating as a thermal insulation on cooled turbine hardware (National Aeronautics and Space Administration ;, 1976), by Curt H. Liebert, Francis S. Stepka, and Lewis Research Center (page images at HathiTrust)
- NACA Conference on Turbines : a compilation of papers presented by NACA staff members, Aircraft Engine Research Laboratory, Cleveland, Ohio, January 16, 1947 (National Advisory Committee for Aeronautics, 1947), by Ohio) NACA Conference on Turbines (1947 : Cleveland, Ohio) Aircraft Engine Research Laboratory (Cleveland, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Passive solar heating and cooling : conference and workshop proceedings, May 18-19, 1976, University of New Mexico, Albuquerque, New Mexico (Energy Research and Development Administration ;, 1977), by Passive Solar Heating and Cooling Conference (1976 : University of New Mexico), New Mexico Solar Energy Association, Refrigerating and Air-Conditioning Engineers American Society of Heating, Los Alamos Scientific Laboratory, United States. Energy Research and Development Administration. Division of Solar Energy. Heating and Cooling Research and Development Branch, and University of New Mexico (page images at HathiTrust)
- Proceedings of the Symposium on Individual Cooling, March 17-18, 1969, Kansas State University, Manhattan, Kansas. (Kansas State University, 1969), by Symposium on Individual Cooling (1969 : Kansas State University) and Kansas State University. College of Engineering. Institute for Environmental Research (page images at HathiTrust; US access only)
- NACA Conference on Turbine Materials and Cooling : a compilation of the papers presented, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, March 15, 1951 (NACA, 1951), by Ohio) NACA Conference on Turbine Materials and Cooling (1951 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- NACA Conference on Turbine Materials and Cooling : a compilation of the papers presented, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, March 15, 1951 (NACA, 1951), by Ohio) NACA Conference on Turbine Materials and Cooling (1951 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Proceedings of the International Meeting on Fast Reactor Safety and Related Physics, October 5-8, 1976, Chicago, Illinois (ERDA ;, 1977), by Ill.) International Meeting on Fast Reactor Safety and Related Physics (1976 : Chicago, United States. Energy Research and Development Administration, European Nuclear Society, and American Nuclear Society (page images at HathiTrust)
- NACA Conference on Turbine Cooling : a compilation of the papers presented by NACA staff members, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, November 9, 1949 (NACA, 1949), by Ohio) NACA Conference on Turbine Cooling (1949 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- NACA Conference on Turbine Materials and Cooling : a compilation of the papers presented, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, March 15, 1951 (NACA, 1951), by Ohio) NACA Conference on Turbine Materials and Cooling (1951 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
- Proceedings of the U.S. Nuclear Regulatory Commission ... Water Reactor Safety Research Information Meeting. (Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, in the 20th century), by Water Reactor Safety Research Information Meeting, United States. National Bureau of Standards, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust)
- Meeting on Recator Vessel Liquid Level Measurement. (Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission :, 1981), by Md.) U.S. Nuclear Regulatory Commission. Meeting on Reactor Vessel Liquid Level Measurement (1980 : Gaithersburg, N. N. Kondic, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
- Meeting on Recator Vessel Liquid Level Measurement. (Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission :, 1981), by Md.) U.S. Nuclear Regulatory Commission. Meeting on Reactor Vessel Liquid Level Measurement (1980 : Gaithersburg, N. N. Kondic, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
- Workshop on Beam Cooling and Related Topics : Montreux, Switzerland, 4-8 October 1993 : proceedings (European Organization for Nuclear Research, 1994), by Switzerland) Workshop on Beam Cooling and Related Topics (1993 : Montreux, J. Bosser, and European Organization for Nuclear Research. Proton Synchrotron Division (page images at HathiTrust)
- Workshop on Beam Cooling and Related Topics : Montreux, Switzerland, 4-8 October 1993 : proceedings (European Organization for Nuclear Research, 1994), by Switzerland) Workshop on Beam Cooling and Related Topics (1993 : Montreux, J. Bosser, and European Organization for Nuclear Research. Proton Synchrotron Division (page images at HathiTrust)
- Refrigeration for cryogenic sensors and electronic systems : proceedings of a conference held at the National Bureau of Standards, Boulder, CO, October 6-7, 1980 (U. S. Dept. of Commcerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. G.P.O., 1981), by S. E. McCarthy, D. B. Sullivan, James Edward Zimmerman, International Institute of Refrigeration. Commission A 1-2, United States. National Engineering Laboratory. Electromagnetic Technology Division, and United States. National Bureau of Standards (page images at HathiTrust)
- Applications of closed-cycle cryocoolers to small superconducting devices : proceedings of a conference held at the National Bureau of Standards, Boulder, Colorado, October 3-4, 1977 (U.S. Dept. of Commerce, National Bureau of Standards :, 1978), by Co.) United States. National Bureau of Standards (1977 : Boulder, Thomas M. Flynn, James Edward Zimmerman, United States. National Bureau of Standards, and United States. Office of Naval Research (page images at HathiTrust)
- NACA Conference on Turbine Cooling : a compilation of the papers presented by NACA staff members, Lewis Flight Propulsion Laboratory, Cleveland, Ohio, November 9, 1949 (NACA, 1949), by Ohio) NACA Conference on Turbine Cooling (1949 : Cleveland, Lewis Flight Propulsion Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)