The Online Books Page

Aluminum -- Electrometallurgy

See also what's at your library, or elsewhere.

• Aluminum
• Aluminum -- Metallurgy
• Electrometallurgy

• Operation of a two-compartment cell. (U.S. Dept. of the Interior, Bureau of Mines, 1968), by Eben L. Singleton, Thomas A. Sullivan, D. E. Kirby, and United States Bureau of Mines (page images at HathiTrust)
• Electrowinning aluminum from aluminum chloride : operation of a single-compartment cell (U.S. Dept. of Interior, Bureau of Mines, 1970), by D. E. Kirby, Thomas A. Sullivan, Eben L. Singleton, and United States Bureau of Mines (page images at HathiTrust)
• Anode materials for alumina reduction (U.S. Dept. of Interior, Bureau of Mines, 1970), by V. Anthony Cammarota, David Schlain, and United States Bureau of Mines (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• The Radiochemistry of Aluminum and Gallium, by John E. Lewis (PDF at lanl.gov)
• Analytical methods for aluminum alloys. (Chicago, 1948), by Ill.) Aluminum Research Institute (Chicago (page images at HathiTrust)
• Aluminum plants and facilities. (U. S. Govt. print. off., 1945), by United States. Surplus Property Board (page images at HathiTrust)
• Standard methods for the sampling and analyzing of aluminum and certain aluminum alloys. (Aluminum research institute, 1939), by Ill.) Aluminum Research Institute (Chicago (page images at HathiTrust)
• The true story of aluminum. (H. Regnery Co., 1958), by Alfred Cowles (page images at HathiTrust)
• The aluminum industry (Bellman publishing co., inc., 1946), by Stanley Vincent Malcuit (page images at HathiTrust)
• Design manual for the repair of aluminum alloy structures (Johnson Research Corp., 1952), by Howard Martin Jensen (page images at HathiTrust)
• Eleventh report to the Alloys research committee. (I. Mech. E., 1921), by Institution of Mechanical Engineers (Great Britain). Alloys research committee, D. Hanson, Sydney Leonard Archbutt, and Walter Rosenhain (page images at HathiTrust; US access only)
• Thin films and surfaces. (Chemical Pub. Co., 1950), by Winifred Lewis (page images at HathiTrust)
• Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire and all forms of structural shapes ... (Pittsburgh, Pa., 1897), by Aluminum Company of America and Alfred E. Hunt (page images at HathiTrust)
• Forming aluminum. (Aluminum company of America, 1941), by Aluminum Company of America (page images at HathiTrust)
• The metallurgy of aluminium and aluminium alloys. (Baird, 1925), by Robert John Anderson (page images at HathiTrust)
• Aluminium: its history, occurrence, properties, metallurgy and applications, including its alloys. (H.C. Baird & Co.;, 1887), by Joseph W. Richards (page images at HathiTrust)
• Aluminium: its history, occurrence, properties, metallurgy and applications, including its alloys. (H. C. Baird & co., 1890), by Joseph W. Richards (page images at HathiTrust)
• Aluminum bronze powder and aluminum paint (The Chemical catalog company, inc., 1927), by Junius David Edwards (page images at HathiTrust)
• Aluminum paint and powder (Reinhold publishing corporation, 1936), by Junius David Edwards (page images at HathiTrust)
• Aluminum paint and powder (Reinhold, 1955), by Junius David Edwards and Robert I. Wray (page images at HathiTrust)
• Aluminum, an industrial marketing appraisal (Inland Press, inc., 1944), by Nathanael H. Engle, Robert Mossé, Homer Ewart Gregory, Washington State Planning Council, and United States. Department of Commerce (page images at HathiTrust)
• Forming and bending Kaiser aluminum. (Chicago, 1954), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Aluminum and magnesium design and fabrication. (McGraw-Hill Book Co., 1949), by R. Burt Schulze (page images at HathiTrust)
• The occurance of aluminium in vegetable products, animal products, and natural waters. (New York, J. Wiley & sons; [etc., etc.], 1904), by C. F. Langworthy and Peter T. Austen (page images at HathiTrust; US access only)
• Aluminium alcoholates., by Orin Edson Crooker (page images at HathiTrust; US access only)
• Aluminiumoxyd als katalysator in der organischen chemie (Akademische verlagsgesellschaft m.b.h., 1929), by Vladimir N. Ipatieff and Carl Freitag (page images at HathiTrust; US access only)
• Aluminum in modern architecture (distributed by Reinhold Pub. Corp., New York, 1956), by Reynolds Metals Company, Paul Weidlinger, and John Peter (page images at HathiTrust)
• Structural design in metals (Ronald Press Co., 1949), by Clifford David Williams and Ernest C. Harris (page images at HathiTrust)
• Designing with aluminum extrusions. (Reynolds Metals Company, 1949), by Louisville Reynolds Metals Company (page images at HathiTrust)
• L'aluminium dans l'industrie électrique, rapports de la XVe commission de l'Union des syndicats de l'électricité. (Bureaux de la Revue générale de l'électricité, 1920), by Union technique des syndicate de l'électricité and Revue géneral de l'électricité (page images at HathiTrust; US access only)
• Alcoa Aluminum handbook. (Pittsburgh, 1957), by Aluminum Company of America (page images at HathiTrust)
• Fabricated aluminum. (Aluminum company of America, 1909), by Ludvig Holberg and Aluminum Company of America (page images at HathiTrust)
• An outline of aluminum. (Aluminum company of America, 1940), by Aluminum Company of America (page images at HathiTrust)
• Aluminium; seine eigenschaften und seine bearbeitung in industrie und handwerk (M. Jänecke, 1926), by Richard Erdmann (page images at HathiTrust; US access only)
• Aluminum and its alloys, their properties, thermal treatment and industrial application (D. Van Nostrand Co., 1922), by C. Grard, Henry Wilfred Lewis Phillips, and C. M. Phillips (page images at HathiTrust)
• Laboratoriumsbuch für die tonerde- und aluminium-industrie (W. Knapp, 1922), by Heinrich Hiller (page images at HathiTrust; US access only)
• L'aluminium et les métaux alcalins. Recherches historiques et techniques sur leurs propriétés. leurs procédés d'extraction et leurs usages ... (Lacroix et Baudry; [etc., etc.], 1858), by Charles Tissier and Alexandre Tissier (page images at HathiTrust)
• Über die Verbreitung des Aluminiums in der Natur und seine Bedeutung beim Bau- und Betriebsstoffwechsel der Pflanzen (G. Fischer, 1922), by Julius. 1861- Stoklasa (page images at HathiTrust; US access only)
• Kinetics and mechanism of precipitation and nature of the precipitate obtained in phosphate removal from wastewater using aluminum (III) and iron (III) salts (For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by Howard Leonard Recht, Masood Ghassemi, and United States. Federal Water Quality Administration (page images at HathiTrust; US access only)
• Economic analysis of pretreatment standards for the secondary copper and aluminum subcategories of the nonferrous metals manufacturing point source category (Environmental Protection Agency, Economic Analysis Staff, Office of Water Planning and Standards, 1976), by United States. Environmental Protection Agency. Office of Water Planning and Standards and Inc Arthur D. Little (page images at HathiTrust)
• Aluminum and sodium minerals from oil shale : technical, environmental, economic, legislative, and policy aspects of an undeveloped minerals source : report (U.S. Govt. Print. Off., 1974), by Paul F. Rothberg, Library of Congress. Science Policy Research Division, and United States. Congress. House. Committee on Interior and Insular Affairs. Subcommittee on Mines and Mining (page images at HathiTrust)
• Aluminium, its manufacture, manipulation and marketing (Sir I. Pitman & sons, ltd., 1920), by George Mortimer (page images at HathiTrust; US access only)
• Impact resistance of non-ferrous passenger car wheels. Final report. (1978), by Larry Bowers and Jerry G. Wallingford (page images at HathiTrust)
• Near term weight reduction potential in a 1977 General Motors B body vehicle. Final report. (1978), by Donald A. Hurter, Philip G. Gott, and J. Staley (page images at HathiTrust)
• Impact resistance of non-ferrous passenger car wheels - modification number two (2). Final report. (1978), by Jerry G. Wallingford (page images at HathiTrust)
• Vehicle weight reduction study. Final report. (1981) (page images at HathiTrust)
• Automotive manufacturing processes. Volume V - manufacturing processes and equipment for the mass production and assembly of motor vehicles. Final report. (1981) (page images at HathiTrust)
• Profiles of major suppliers to the automotive industry. Volume 1: overview. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
• Profiles of major suppliers to the automotive industry. Volume 2: iron, steel and aluminum suppliers to the automotive industry. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
• Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
• Technical proposal for conduct producibility studies DDG-X. (1981) (page images at HathiTrust; US access only)
• Vehicle impact testing of lightweight lighting standards. Final report. (1988), by Abbas Abghari, Roger L. Stoughton, and J. P. Dusel (page images at HathiTrust)
• Secondary aluminum : (metallurgy, technology, raw materials, production, economics, and utilization) (The Sherwood Press, 1931), by Robert John Anderson (page images at HathiTrust)
• Aluminum from mine to sky. (Whittlesey House, 1947), by June M. Metcalfe (page images at HathiTrust)
• L'aluminium. [Première]-deuxième partie ... (B. Tignol, 1896), by Adolphe Minet (page images at HathiTrust)
• The production of aluminum and its industrial use. (J. Wiley and Sons; [etc., etc.], 1905), by Adolphe Minet and Leonard Waldo (page images at HathiTrust)
• L'aluminium : ses propriétés, ses applications : historique, minerais, fabrication, propriétés, applications générales (Gauthier-Villars, 1903), by Prosper Moissonnier (page images at HathiTrust; US access only)
• Aluminium, its manufacture, manipulation and marketing (Sir I. Pitman & sons, ltd., 1920), by George Mortimer (page images at HathiTrust; US access only)
• Aluminium; its history, occurrence, properties, metallurgy and applications, including its alloys. (H.C. Baird & Co., 1896), by Joseph William Richards (page images at HathiTrust)
• The industrial uses of bauxite, with an account of its origin, occurrence, composition and properties (E. Benn limited, 1928), by Norman Victor Sydney Knibbs (page images at HathiTrust; US access only)
• Aluminum repairing; the repairing of aluminum sheet and castings and attaching of copper, brass and steel to aluminum by tinning, sweating, and burning processes, with sheet iron jigs, explanations and illustrations showing the methods to be adopted in working these processes under their different headings (C. Lockwood and son, 1922), by William H. H. Platt (page images at HathiTrust; US access only)
• Drafting standards: aluminum extruded and tubular products. (New York, 1962), by Aluminum Association. Aluminum Extruded Products Division (page images at HathiTrust)
• Kaiser aluminum electrical bus conductors : technical manual. (Chicago, 1957), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Evaluation of technology for the recovery of metallurgical-grade alumina from coal ash (Dept. of the Interior, Bureau of Mines :, 1979), by J. A. Eisele, D. J. Bauer, and United States Bureau of Mines (page images at HathiTrust)
• Raw materials for aluminum production (U.S. Dept. of the Interior, Bureau of Mines, 1954), by D. D. Blue (page images at HathiTrust)
• Aluminum fabrication in the Pacific Northwest : an economic survey (U.S. Dept. of the Interior, Bureau of Mines, 1962), by Frank B. Fulkerson (page images at HathiTrust)
• Aluminum availability--market economy countries : a mineral availability program appraisal (U.S. Dept. of the Interior, Bureau of Mines, 1983), by Gary R. Peterson and S. J. Arbelbide (page images at HathiTrust)
• The economics of byproduct metals (in two parts). 2. Lead, zinc, uranium, rare-earth, iron, aluminum, titanium, and lithium systems / by Alfred Petrick, Jr., Harold J. Bennett, Karl E. Starch, and Robert C. Weisner. (U.S. Dept. of the Interior, Bureau of Mines, 1973), by Alfred Petrick (page images at HathiTrust)
• Brazing Alcoa aluminum. (Pittsburgh, 1955), by Aluminum Company of America (page images at HathiTrust)
• Corrosion experience with aluminum powder products (Argonne National Laboratory, 1963), by J. E. Draley, S. Greenberg, W. E. Ruther, Argonne National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Swelling of aluminum-clad aluminum-plutonium alloys on postirradiation annealing (Argonne National Laboratory, 1963), by B. A. Loomis, Argonne National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Pilot-plant investigations preparation of alumina from potassium alum (U.S. Dept. of the Interior, Bureau of Mines, 1946), by C. T. Baroch (page images at HathiTrust)
• Recovering aluminum from a copper leach liquor by ion exchange : an exploratory study (U.S. Dept. of the Interior, Bureau of Mines, 1976), by J. T. May, D. C. Seidel, and United States Bureau of Mines (page images at HathiTrust)
• A sulfidation- and oxidation-resistant ferritic stainless steel containing aluminum (U.S. Dept. of the Interior, Bureau of Mines, 1984), by J. S. Dunning (page images at HathiTrust)
• Development of a soft-soldering system for aluminum (U.S. Dept. of the Interior, Bureau of Mines, 1983), by W. L. Falke, L. A. Neumeier, and A. Y. Lee (page images at HathiTrust)
• Aluminum extraction from anorthosite by leaching with hydrochloric acid and fluoride (U.S. Dept. of the Interior, Bureau of Mines, 1982), by P. R. Bremner, D. J. Bauer, and J. A. Eisele (page images at HathiTrust)
• Effects of Al additions on sulfidation resistance of some Fe-Cr-Ni alloys (Bureau of Mines, U.S. Dept. of the Interior, 1989), by J. S. Dunning and S. C. Rhoads (page images at HathiTrust)
• Determination of metallic aluminum in recycled glass (U.S. Dept. of Interior, Bureau of Mines, 1971), by Thomas E. Green, College Park Metallurgy Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• Pilot-plant concentration of Arkansas aluminum ores (U.S. Dept. of the Interior, Bureau of Mines, 1949), by H. Kenworthy, J. S. Kennedy, E. G. Howe, and S. M. Runke (page images at HathiTrust)
• Methods for producing alumina from clay : an evaluation of a lime-soda sinter process (U.S. Dept. of the Interior, Bureau of Mines, 1967), by Ralph C. Kirby, John J. Henn, Paul W. Johnson, Frank A. Peters, and United States Bureau of Mines (page images at HathiTrust)
• ([alpha], n) cross sections of beryllium, magnesium, and aluminum (Technical Information Division, Oak Ridge Operations, 1947), by I. Halpern, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Cross section of powdered graphite. [Part] 2, Orientation in graphite by x-ray diffraction. [Part] 3, Cross section and crystal orientation in aluminum (Technical Information Division, Oak Ridge Operations, 1947), by W. H. Zachariasen, A. Weber, S. S. Sidhu, V. Myers, G. Arnold, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)
• Cross section and crystal orientation in extruded graphite (and aluminum) (Atomic Energy Commission, 1947), by G. Arnold, A. Weber, R. Sternheimer, Argonne National Laboratory, and U.S. Atomic Energy Commission Technical Information Division (page images at HathiTrust)
• Extraction of aluminum and fluorine from leached potlining residues (U.S. Dept. of the Interior, Bureau of Mines, 1969), by P. C. Good, William G. Gruzensky, and United States Bureau of Mines (page images at HathiTrust)
• Purification, purity estimation, and spectra of some organic derivatives of fluorine, silicon, boron, and aluminum (U.S. Dept. of the Interior, Bureau of Mines, 1965), by T. C. Davis, Jesse C. Morris, University of Wyoming, United States. Air Force. Office of Scientific Research, United States. Advanced Research Projects Agency, and United States Bureau of Mines (page images at HathiTrust)
• Extracting iron from an aluminum sulfate leach solution (Dept. of the Interior, Bureau of Mines, 1979), by D. J. Bauer, M. T. Morimoto, J. A. Eisele, L. E. Schultze, and United States Bureau of Mines (page images at HathiTrust)
• Beneficiation of aluminum plant residues (U.S. Dept. of the Interior, Bureau of Mines, 1963), by Robert S. McClain, G. V. Sullivan, and United States Bureau of Mines (page images at HathiTrust)
• Using molten zinc to extract aluminum from aluminum-silicon alloys : a progress resport (U.S. Dept. of the Interior, Bureau of Mines, 1961), by H. S. Caldwell and M. J. Spendlove (page images at HathiTrust)
• Refining crude aluminum by the subhalide reaction (U.S. Dept. of the Interior, Bureau of Mines, 1961), by Leland A. Yerkes and Oliver C. Fursman (page images at HathiTrust)
• Recovering aluminum and fluorine compounds from aluminum plant residues (U.S. Dept. of the Interior, Bureau of Mines, 1961), by Robert S. McClain, William Albert Stickney, and G. V. Sullivan (page images at HathiTrust)
• Aluminum extraction characteristics of three calcium aluminates in water, sodium hydroxide, and sodium carbonate solutions (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Raynard V. Lundquist and Harold Leitch (page images at HathiTrust)
• Synthesis and some properties of aluminum borate whiskers (U.S. Dept. of the Interior, Bureau of Mines, 1965), by Robert C. Johnson and John K. Alley (page images at HathiTrust)
• Extraction of aluminum from 2Na₂O-3CaO-5Al₂O₃ in water and in solutions of NaOH and Na₂CO₃ (U.S. Dept. of the Interior, Bureau of Mines, 1965), by Raynard V. Lundquist (page images at HathiTrust)
• Aluminum : an industrial marketing appraisal (Richard D. Irwin, inc., 1945), by Nathanael H. Engle, Robert Mossé, Homer Ewart Gregory, Washington State Planning Council, and United States. Dept. of Commerce (page images at HathiTrust; US access only)
• The heat-treatment and annealing of aluminum and its alloys (Sherwood Pr., 1933), by N. F. Budgen (page images at HathiTrust)
• Aluminum paint manual... (Aluminum company of America, 1940), by Aluminum Company of America (page images at HathiTrust)
• Bauxite and aluminium (J. Murray, 1925), by W. G. Rumbold (page images at HathiTrust; US access only)
• Die darstellung des aluminiums, kaliums, natriums, magnesiums, baryums, strontiums, und calciums und der metalloide bor und silicium. (G. Basse, 1858), by Eduard Uhlenhuth (page images at HathiTrust)
• The Pittsburgh reduction co. manufacturers of aluminum and aluminum alloys in the form of ingots, castings ... and all forms of structural shapes ... (Ewens and Eberle, 1904), by Pittsburgh Reduction Company (page images at HathiTrust)
• Die Rauchschadenfrage der Aluminiumfabriken, mit besonderer Berücksichtigung der Aluminiumfabrik Chippis. (P. Parey, 1922), by Fritz Wille (page images at HathiTrust; US access only)
• Aluminum, the metal and its alloys (a critical descriptive treatise) by M. G. Corson (M. G. Korunsky) (D. Van Nostrand company, 1926), by Michael George Corson and Joseph Ramón Vilella (page images at HathiTrust; US access only)
• Aluminium; die leichtmetalle und ihre legierungen (VDI-verlag, gmbh, 1929), by Paul J. Melchior (page images at HathiTrust; US access only)
• De l'aluminium. Ses propiétés, sa fabrication et ses applications (Mallet-Bachelier, 1859), by Henri Sainte-Claire Deville (page images at HathiTrust)
• Methoden und Resultate der Untersuchung des Aluminiums und seiner Abkömmlinge. (Selbst-Verlag der Anstalt, Druck von F. Lohbauer, 1900), by L. Tetmajer (page images at HathiTrust; US access only)
• Die aluminium-industrie. (F. Vieweg und sohn, 1903), by F. Winteler (page images at HathiTrust; US access only)
• Occurrence of aluminium in vegetable products, animal products and natural waters; a contribution to the bibliography of the subject. (Wiley, 1904), by C. F. Langworthy and P. T. Austen (page images at HathiTrust)
• Aluminum and the Senate tariff bill (Fair Tariff League, 1922), by Fair Tariff League (page images at HathiTrust)
• The use of aluminum for oil lease tanks. Part I. Field tests (United States Bureau of Mines, 1931), by Ludwig Schmidt, C. J. Wilhelm, J. M. Devine, and United States Bureau of Mines (page images at HathiTrust)
• The use of aluminum for oil lease tanks. Part II. Laboratory tests (United States Bureau of Mines, 1931), by Ludwig Schmidt, C. J. Wilhelm, J. M. Devine, and United States Bureau of Mines (page images at HathiTrust)
• Determination of iron oxide in liquid steel (Washington, D.C. : U.S. Department of Commerce, Bureau of Mines, 1932., 1932), by C. H. Herty, M. W. Lightner, Hyman Freeman, and United States Bureau of Mines (page images at HathiTrust)
• Preparation of light aluminum-copper casting alloys (U.S. Dept. of the Interior, Bureau of Mines, 1922), by Robert John Anderson (page images at HathiTrust)
• Inclusions in aluminum-alloy sand castings (U.S. Dept. of the Interior, Bureau of Mines, 1922), by Robert J. Anderson (page images at HathiTrust)
• The inflammability of aluminum dust (U.S.Bureau of Mines, 1918), by Alan Leighton and United States Bureau of Mines (page images at HathiTrust)
• Air duct guide. (Louisville, Ky., 1957), by Reynolds Metals Company (page images at HathiTrust)
• Light metals and alloys. Aluminum. Magnesium (U.S. Dept. of Commerce, Bureau of Standards, 1927), by United States. Bureau of Standards and United States. National Bureau of Standards (page images at HathiTrust)
• Aluminum and its light alloys (Govt. print. off., 1919), by United States. National Bureau of Standards (page images at HathiTrust)
• Solders for aluminum (G.P.O., 1923), by United States. Bureau of Standards (page images at HathiTrust)
• Solders for aluminum ... (Govt. print. off., 1919), by United States. Bureau of Standards (page images at HathiTrust)
• Penetration of gamma rays from isotropic sources through aluminum and concrete (Distributed by U.S. Dept. of Commerce, Office of Technical Services, 1959), by Martin J. Berger and L. V. Spencer (page images at HathiTrust)
• Effect of heat flux on the corrosion of aluminum by water. Part II, Influence of water temperature, velocity, and pH on corrosion-product formation (Oak Ridge National Laboratory, 1961), by J. G. Rainwater, J. L. English, T. H. Mauney, H. C. Savage, J. C. Griess, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• Influence of quenching conditions on vacancy loops in aluminum (University of California Lawrence Radiation Laboratory, 1964), by Gobinda Dāsa and Lawrence Radiation Laboratory (page images at HathiTrust)
• Elastic scattering of 24-Mev neutrons by Al, Fe, Sn, and Bi (Lawrence Radiation Laboratory, 1961), by T. P. Stuart and Lawrence Radiation Laboratory (page images at HathiTrust; US access only)
• High-pressure investigations of group III elements. Part I, Fusion curves and polymorphic transitions of aluminum, gallium, indium, and thallium at high pressures. Part II, Phase transformations in uranium at high pressures (University of California Lawrence Radiation Laboratory, 1962), by G. C. Kennedy, R. C. Newton, W. Klement, A. Jayaraman, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Reactivity effects of various reflectors on near-homogeneous, BeO-moderated, oralloy-fueled systems (University of California Lawrence Radiation Laboratory, 1962), by Loren L. Gardner, Thomas F. Weirich, Frederick J. Shon, John R. Morton, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Energy spectra and angular dependences of neutrons from the 31.5-Mev proton bombardment of beryllium-9, nitrogen-14, and aluminum-27 (Lawrence Radiation Laboratory, 1958), by Harold E. Adelson and Lawrence Radiation Laboratory (page images at HathiTrust)
• Working with aluminum. (Bruce Pub. Co., 1947), by Douglas Brown Hobbs (page images at HathiTrust; US access only)
• A spot test procedure for iron and copper inclusions in aluminum cans (Hanford Atomic Products Operation, 1958), by W. E. Stavig, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, and Hanford Atomic Products Operation (page images at HathiTrust)
• Erosion-corrosion of aluminum alloys (Hanford Atomic Products Operation, 1963), by R. L. Dillon, R. S. Hope, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• Observations on the mechanisms and kinetics of aqueous aluminum corrosion II (Hanford Atomic Products Operation, 1961), by R. L. Dillon, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• Pilot scale aluminum bed decontamination of reactor effluent : [Part] II Final report (Hanford Atomic Products Operation, 1962), by H. G. Rieck, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• A flux-free method for joining aluminum to stainless steel (U.S. Atomic Energy Commission, 1961), by L. C. Lemon, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• The effect of temperature and flow velocity on the decontamination of reactor effluent water with aluminum (U.S. Atomic Energy Commission, 1959), by W. B. Silker, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)
• Fabrication of aluminum - 1.8 w/o plutonium PCTR loading (U.S. Atomic Energy Commission, 1959), by J. B. Burnham, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Effect of oxide dissolution and heat transfer on the corrosion of aluminum fuel cladding (Hanford Atomic Products Operation, 1963), by D. R. Dickinson, R. J. Lobsinger, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• The intergranular corrosion of aluminum in superheated steam (Hanford Atomic Products Operation, 1956), by C. Groot, R. E. Wilson, United States. Energy Research and Development Administration, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• A study of heat transfer effects on aluminum corrosion. Part I (Hanford Atomic Products Operation, 1956), by D. R. de Halas, United States. Energy Research and Development Administration, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Evaluation of aluminum for use in reactors cooled by high-temperature recirculating water (U.S. Atomic Energy Commission, 1960), by J. A. Ayres, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• The influence of mercury on aluminum corrosion (Hanford Atomic Products Operation, 1953), by D. R. de Halas, Hanford Atomic Products Operation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion length measurements in the 7 1/2 inch lattic exponential pile (Hanford Atomic Products Operation, 1953), by C. R. Richey, Hanford Atomic Products Operation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Molten-salt solvents for fluoride volatility processing of aluminum-matrix nuclear fuel elements (Oak Ridge National Laboratory, 1964), by R. E. Thoma, E. H. Guinn, B. J. Sturm, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fabrication development of U₃O₈-aluminum composite fuel plates for the advanced test reactor (Oak Ridge National Laboratory, 1964), by D. O. Hobson, C. F. Jr Leitten, R. L. Heestand, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion characteristics of thorium and aluminum (Oak Ridge National Laboratory, 1954), by J. A. Milko, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Metallurgy Division (page images at HathiTrust)
• The application of a nominal 48 WT % U-AL alloy to plate-type aluminum research reactor fuel elements (Oak Ridge National Laboratory, 1958), by W. C. Thurber, R. J. Beaver, J. H. Erwin, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Metallurgy Division (page images at HathiTrust)
• Spatial distribution of electron depth dose in aluminum (Oak Ridge National Laboratory, 1956), by F. N. Huffman, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Health Physics Division (page images at HathiTrust)
• Space vehicle shielding studies. (Part II), The attenuation of solar flares by alumnium shields (Oak Ridge National Laboratory, 1964), by R. G. Alsmiller, J. E. Murphy, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Neutron Physics Division (page images at HathiTrust)
• Space vehicle shielding studies. (Part III), The attenuation of a particular solar flare by an alumnium shield (Oak Ridge National Laboratory, 1964), by R. G. Alsmiller, J. E. Murphy, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Neutron Physics Division (page images at HathiTrust)
• Space vehicle shielding studies : calculations of the attenuation of a model solar flare and monoenergetic proton beams by aluminum shields (Oak Ridge National Laboratory, 1963), by R. G. Alsmiller, J. E. Murphy, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Neutron Physics Division (page images at HathiTrust)
• Radiation-induced sintering of thoria powders (Oak Ridge National Laboratory, 1962), by J. P. McBride, S. D. Clinton, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• Effect of heat flux on the corrosion of aluminum by water. Part III, Final report on tests relative to the high-flux isotope reactor (Oak Ridge National Laboratory, 1961), by J. L. English, T. H. Mauney, J. G. Rainwater, H. C. Savage, J. C. Griess, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• Handbuch der Galvanoplastik; oder, Der elektro-chemischen Metallüberziehung in allen ihren Anwendungsarten; mit einer ausführlichen Abhandlung über das Aluminium, seine Eigenschaften und alle seine Anwendungsarten; sechste Auflage des Roseleur-Kaselowsky'scher Handbuches. (Keller, 1900), by Konrad Taucher (page images at HathiTrust; US access only)
• Das Aluminium und seine Legierungen, Eigenschaften, Gewinnung, Verarbeitung und Verwendung (A. Hartleben, 1914), by Hugo Krause (page images at HathiTrust; US access only)
• Do it yourself with aluminum; 125 project for the home craftsman. (McGraw-Hill, 1955), by George W. Birdsall (page images at HathiTrust)
• Kaiser aluminum sheet and plate product information. (Chicago, 1958), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Kaiser aluminum rod, bar and wire; product information. (Chicago, 1954), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Aluminum and aluminum ware. A review of the latest scientific researches into the nature and uses of aluminum and the characteristics of aluminum cooking utensils. (Aluminum Wares Association, 1926), by Chicago Aluminum Wares Association (page images at HathiTrust)
• Aluminum poisoning (Research publishing company, 1928), by Charles Truax Betts and Anti-cancer club of America (page images at HathiTrust)
• Aluminum in school construction. (Chicago, 1957), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Forming Alcoa aluminum. (Aluminum Co. of America, 1962), by Aluminum Company of America (page images at HathiTrust; US access only)
• The mineral industry of the British Empire and foreign countries. Statistics, 1919-1921. Aluminum, including bauxite and cryolite. (H. M. Stationery Off., 1923), by Imperial Institute (Great Britain) (page images at HathiTrust)
• The mineral industry of the British Empire and foreign countries. Statistics, 1920-1922. Aluminium, including bauxite and cryolite. (H. M. Stationery Off., 1924), by Imperial Institute (Great Britain) (page images at HathiTrust)
• The slowing down distribution to indium resonance of fission neutrons from a point fission source in two mixtures of aluminum and light water, 1:1 and 1:2 by volume (U.S. Atomic Energy Commission. Technical Information Service, 1949), by J. W. T. Jr Dabbs, T. E. Fitch, J. E. Hill, L. D. Roberts, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Separation of nitrate and aluminum from radioactive chemical wastes (Idaho Operations Office, U.S. Atomic Energy Commission, 1956), by John B. Huff, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Effect of geometrical shape on the continuous dissolution of aluminum in mercury catalyzed nitric acid (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), by A. F. Boeglin, J. A. Buckham, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Thermal expansion of aluminum and various important aluminum alloys (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Peter Hidnert and United States. National Bureau of Standards (page images at HathiTrust)
• Thermal expansion of nickel, monel metal, stellite, stainless steel, and aluminum (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by Wilmer Henry Souder, Peter Hidnert, and United States. National Bureau of Standards (page images at HathiTrust)
• Aluminum as a factor in soil acidity ([Baltimore, 1920), by Jose Jison Mirasol (page images at HathiTrust)
• Recoil electrons from aluminum. ([Ithaca, N. Y.], 1927), by Arthur Aaron Bless (page images at HathiTrust)
• Aluminum paint manual ... (Aluminum company of America, 1937), by Aluminum Company of America (page images at HathiTrust)
• An opinion upon aluminum; a series of articles (Research publishing company, 1926), by Charles Truax Betts (page images at HathiTrust; US access only)
• Acid processes for the extraction of alumina (U.S. G.P.O., 1927), by G. S. Tilley, Oliver C. Ralston, Russell Ward Millar, and United States Bureau of Mines (page images at HathiTrust)
• A novel method of testing the shear strength of thick honeycomb composites (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by A. J. Hodge, A. T. Nettles, and George C. Marshall Space Flight Center (page images at HathiTrust)
• An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by A. T. Nettles, A. J. Hodge, D. G. Lance, and George C. Marshall Space Flight Center. Materials and Processes Laboratory (page images at HathiTrust)
• Effects of fragmentation parameter variations on estimates of galactic cosmic ray exposure : dose sensitivity studies for aluminum shields (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Lawrence W. Townsend and Langley Research Center (page images at HathiTrust)
• Microstructure and orientation effects on properties of discontinuous silicon carbide/aluminum composites (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by David L. McDanels, Charles A. Hoffman, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Fracture toughness of boron/aluminum laminates with various proportions of 0° and ±45 ̊plies (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), by C. C. Poe, J. A. Sova, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Adsorption and chemical reaction of gaseous mixtures of hydrogen chloride and water on aluminum oxide and application to solid-propellant rocket exhaust clouds (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by W. R. Cofer, G. L. Pellett, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Wear of aluminum and hypoeutectic aluminum-silicon alloys in boundary-lubricated pin-on-disk sliding (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by John Ferrante, William A. Brainard, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application (National Aeronautics and Space Administration ;, 1974), by J. H. Laakso, J. W. Straayer, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
• Melting aluminium chips (Govt. print. off., 1916), by H. W. Gillett and Geoffrey Minto James (page images at HathiTrust)
• Investigation of atomic oxygen-surface interactions related to measurements with dual air density explorer satellites (National Aeronautics and Space Administration ;, 1973), by B. J. Wood, Henry Wise, C. M. Ablow, Langley Research Center, and Stanford Research Institute (page images at HathiTrust)
• Fundamental mechanisms of tensile fracture in aluminum sheet unidirectionally reinforced with boron filament (National Aeronautics and Space Administration ;, 1972), by Harvey W. Herring and Langley Research Center (page images at HathiTrust)
• Boron/aluminum-graphite/resin advanced fiber composite hybrids (National Aeronautics and Space Administration ;, 1975), by C. C. Chamis, Timothy L. Sullivan, Raymond F. Lark, and Lewis Research Center (page images at HathiTrust)
• Criticality effects of centrally located tubes and rods of aluminum, iron and tungsten in a homogeneous reactor (National Aeronautics and Space Administration :, 1962), by Daniel Fieno and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4067 (National Aeronautics and Space Administration ;, 1967), by B. Pat Denardo, C. Robert Nysmith, James L. Summers, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Cyclic debonding of unidirectional composite bonded to aluminum sheet for constant-amplitiude loading (National Aeronautics and Space Administration ;, 1976), by George L. Roderick, John H. Crews, Richard A. Everett, and Langley Research Center (page images at HathiTrust)
• Effect of fiber diameter and matrix alloys on impact-resistant boron/aluminum composites (National Aeronautics and Space Administration :, 1976), by David L. McDanels, Robert A. Signorelli, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of nature of oxygen interactions on friction of titanium, aluminum, and molybdenum (National Aeronautics and Space Administration ;, 1976), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• Weldability of high-toughness iron-12-percent-nickel alloys with reactive metal additions of titanium, aluminum, or niobium (National Aeronautics and Space Administration ;, 1977), by Jack H. Devletian, Walter R. Witzke, Joseph R. Stephens, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4889 (National Aeronautics and Space Administration ;, 1968), by Marvin D. Rhodes, Conrad M. Willis, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Theoretical buckling loads of boron/aluminum and graphite/resin fiber-composite anisotropic plates (National Aeronautics and Space Administration ;, 1971), by C. C. Chamis, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Application of rate-temperature parameters to tensile data for magnesium alloys and a relation between the Larson-Miller constant and the activation energy (National Aeronautics and Space Administration :, 1960), by Charles R. Manning and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6317 (National Aeronautics and Space Administration ;, 1971), by Robert M. Caves, Salvatore J. Grisaffe, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Aerodynamic damping at Mach numbers of 1.3 and 1.6 of a control surface on a two-dimensional wing by the free-oscillation method (National Aeronautics and Space Administration, 1960), by W. J. Tuovila, R. W. Hess, and Langley Research Center (page images at HathiTrust)
• Scanning electron microscope study of polytetrafluoroethylene sliding on aluminum single crystals (National Aeronautics and Space Administration ;, 1973), by William A. Brainard, Donald H. Buckley, and Lewis Research Center (page images at HathiTrust)
• Influence of aluminum on friction and wear of iron-aluminum alloys dry and lubricated (National Aeronautics and Space Administration ;, 1971), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• Aluminum runway surface as possible aid to aircraft braking (National Aeronautics and Space Administration ;, 1973), by C. David Miller, I. Irving Pinkel, and Aerospace Safety Research and Data Institute (page images at HathiTrust)
• Aluminum and its light alloys. Issued April 21, 1919 ... (Govt. Print. Off., 1919), by United States. National Bureau of Standards (page images at HathiTrust)
• Mineral industry of the British Empire and foreign countries (Printed and pub. by H.M. Stationery Off., 1919), by Great Britain. Imperial Mineral Resources Bureau (page images at HathiTrust; US access only)
• Diffusion of xenon through aluminum and stainless steel (Brookhaven National Laboratory, 1960), by A. W. Castleman, A. M. Eshaya, F. E. Hoffmann, U.S. Atomic Energy Commission, Brookhaven National Laboratory, and Inc Associated Universities (page images at HathiTrust)
• Diffusion of iodine through aluminum (Brookhaven National Laboratory, 1960), by A. W. Castleman, A. M. Eshaya, F. E. Hoffmann, U.S. Atomic Energy Commission, Brookhaven National Laboratory, and Inc Associated Universities (page images at HathiTrust)
• Neutron cross section evaluation group : optical model analysis of elastic and inelastic scattering of neutrons by aluminum in the MeV region (Brookhaven National Laboratory, 1965), by S. O. Moore, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The acidimetric determination aluminum of with fluoride at pH 10 - 11 (Hanford Works, 1950), by S. A. Hays, General Electric Company, Hanford Works, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The manufacturing of aluminium, with full notes on aluminium alloys, the analysis and examination of aluminium works materials, and the manufacture of carbon electrodes (E. & F.N. Spon;, 1918), by J. T. Pattison (page images at HathiTrust; US access only)
• Aluminium: its history, occurrence, properties, metallurgy and applications, including its alloys. (H. C. Baird & co., 1890), by Joseph W. Richards (page images at HathiTrust)
• The diffusion of uranium into aluminum (Hanford Atomic Products Operation, 1955), by T. K. Bierlein, D. R. Green, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Determination of aluminum in aluminum corrosion products (Hanford Atomic Products Operation, 1956), by C. Groot, V. H. Troutner, R. M. Peekema, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Graphite and aluminum-block : solution evaporators (Oak Ridge National Laboratory, 1954), by C. D. Susano, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Inelastic scattering of protons by aluminum and carbon (United States Atomic Energy Commission, Technical Information Division, 1950), by C. Levinthal, A. Silverman, E. A. Martinelli, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The scattering and absorption of positive pi mesons by aluminum (thesis) ([Lawrence] Radiation Laboratory, 1952), by James Frueh Tracy, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Aluminium and its alloys, their properties, thermal treatment and industrial application (Constable & company ltd., 1921), by C. Grard, Henry Wilfred Lewis Phillips, and C. M. Phillips (page images at HathiTrust; US access only)
• Sidelights on aluminum and nonferrous metals (United Smelting & Aluminum Co., 1919), by Lawrence M. Brile, C. J. Wolfe, and Henry Hecht (page images at HathiTrust)
• Vehicle weight reduction study (The Office ;, 1981), by United States. National Highway Traffic Safety Administration. Research and Development and Aluminum Company of America. Automotive Marketing Division (page images at HathiTrust)
• Das aluminium und seine legierungen, eigenschaften, gewinnung, verarbeitung, und verwendung. ([s.n.], 1914), by Hugo Krause (page images at HathiTrust; US access only)
• Aluminium and its alloys (New York, 1922), by C. Grard, C. M. Phillips, and Henry Wilfred Lewis Phillips (page images at HathiTrust; US access only)
• The Pittsburgh Reduction Co. : Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire, and all forms of structural shapes . (The Myers & SHinkle company, printers, 1898), by Pittsburgh Reduction Company (page images at HathiTrust)
• Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire, and all forms of structural shapes (Ewens & Eberle, 1903), by Pittsburgh Reduction Company and Alfred E. Hunt (page images at HathiTrust)
• Aluminum availability--market economy countries : a mineral availability program appraisal (U.S. Dept. of the Interior, Bureau of Mines, 1983), by Gary R. Peterson and S. J. Arbelbide (page images at HathiTrust)
• Bismuth-alloy coatings on aluminum (United States Atomic Energy Commission, Technical Information Service, 1955), by Henry A. Saller, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Solder bonding aluminum to uranium (U.S. Atomic Energy Commission, Technical Information Service Extension, 1957), by D. C. Martin, R. P. Sopher, J. T. Niemann, Herbert W. Mishler, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Radiation stability of compacts of aluminum and fuel-bearing glass fibers (Battelle Memorial Institute, 1962), by Richard J. Burian, Ronald F. Dickerson, John E. Gates, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Creep in metals (National Advisory Committee for Aeronautics, 1952), by A. D. Schwope, L. R. Jackson, F. R. Shober, United States National Advisory Committee for Aeronautics, and Battelle Memorial Institute (page images at HathiTrust)
• Compounds of aluminum and indium (Ames Laboratory, 1959), by Alden Earl Ray, J. F. Smith, J. A. Kingston, U.S. Atomic Energy Commission, and Ames Laboratory (page images at HathiTrust)
• Aluminum forming (Louisville, Ky., 1952), by Reynolds Metals Company (page images at HathiTrust; US access only)
• The use of aluminum in dentistry new method rendering its use necessary and easy by means of the automatic pressure apparatus (Barthe & Thompson, 1896), by Edmond Casgrain (page images at HathiTrust)
• Ultrasonic welding of aluminum (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1955), by J. Byron Jones, John G. Thomas, Carmine F. DePrisco, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust; US access only)
• A cladding thickness tester for flat fuel elements (United States Atomic Energy Commission, Technical Information Service Extension, 1957), by J. D. Ross, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust; US access only)
• Versene titration of thorium and aluminum (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1956), by Wilmer R. Cornman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• The diffusion of lithium in aluminum (E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1963), by Louis P. Costas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Fluoride complexing of U(VI) and Pu(IV) in solutions containing AI(III) and (Zr(IV) (E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1964), by Carl S. Schlea, John T. Lowe, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Ultrasonic soldering of aluminum (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1954), by J. Byron Jones, John G. Thomas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Electron metallography of the Al-Ni-U bond (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1957), by Carl L. Angerman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Phase of scattering of thermal neutrons by aluminum and strontium (U.S. Atomic Energy Commission, 1947), by Enrico Fermi, L. Marshall, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)
• Spin dependence of scattering of slow neutrons by Be, Al, and Bi (U.S. Atomic Energy Commission, 1947), by Enrico Fermi, L. Marshall, Argonne National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Model study of a buried arch subjected to dynamic loading (Waterways Experiment Station, 1964), by Robert K. Tener, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Similitude study of flexible buried arches subjected to blast loads (Waterways Experiment Station, 1968), by Jimmy P. Balsara, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Static tests of reinforced concrete beams : report 1 : development of iterative analysis procedure and tests of beams reinforced with steel, aluminum, and fiber glass, with and without helical compressive reinforcement (Waterways Experiment Station, 1968), by H. G. Geymayer, Waterways Experiment Station (U.S.), and United States. Department of the Army. Office of Research and Development (page images at HathiTrust)
• Operational test of modified T11 aluminum landing mat, England AFB, Louisiana (Waterways Experiment Station, 1965), by Cecil D. Burns, Gordon L. Carr, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
• Engineering tests of experimental T11 aluminum airplane landing mat (Waterways Experiment Station, 1963), by Waterways Experiment Station (U.S.) and United States. Army Materiel Command (page images at HathiTrust)
• Engineering tests of experimental T11 aluminum airplane landing mat : appendix B : development of revised design criteria for T11 landing mat (Waterways Experiment Station, 1966), by D. N. Brown, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of aluminum-coated wires as reinforcement for articulated concrete mattresses : report 1 : basic program (Waterways Experiment Station, 1962), by United States. Army. Corps of Engineers. Lower Mississippi Valley Division. Materials and Concrete Laboratory and United States. Mississippi River Commission (page images at HathiTrust)
• Domestic aluminum resources : dilemmas of development : report to the Congress (U.S. General Accounting Office : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1980), by United States General Accounting Office (page images at HathiTrust)
• X-ray study of the ternary system U-Al-O (Technical Services, Department of Commerce ;, 1960), by L. J. Dykstra, United States Maritime Administration, U.S. Atomic Energy Commission, and General Dynamics Corporation. General Atomic Division (page images at HathiTrust)
• The structure and optical properties of CaO·2Al₂O₃ and SrO·2Al₂O₃ (Knolls Atomic Power Laboratory, General Electric Company, 1957), by E. R. Boyko, L. G. Wisnyi, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Evaluation of Kaiser production aluminum honeycomb landing mat (Waterways Experiment Station, 1971), by Charles T. McCormick, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of Harvey Aluminum 1- by 12-ft extruded light-duty landing mat with symmetrical butt-type end connectors (Waterways Experiment Station, 1972), by Hugh L. Green, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, Kirtland Air Force Base United States. Air Force Weapons Laboratory, and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of Dow Chemical extruded truss-web landing mat (Waterways Experiment Station, 1972), by D. W. White, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of Goodyear medium-duty aluminum honeycomb landing mat (Waterways Experiment Station, 1973), by Gordon L. Carr, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of Dow Chemical Company extruded aluminum 4-piece 4- by 4-ft landing mat (MX18-E) (Waterways Experiment Station, 1973), by D. W. White, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of Kaiser MX19-B and MX19-C aluminum honeycomb landing mat (Waterways Experiment Station, 1973), by Gordon L. Carr, Dave A. Ellison, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Army Materiel Command (page images at HathiTrust)
• The mineral industry of the British Empire and foreign countries. War period. Aluminium and bauxite. (1913-1919) (H. M. Stationery Off., 1921), by Imperial Institute (Great Britain) (page images at HathiTrust)
• Finishes for aluminum, secs. I & II. (Louisville, Ky., 1947), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Determination of uranium in aluminum (Oak Ridge Gaseous Diffusion Plant, Union Carbide Nuclear Company, 1964), by G. S. Petit, C. A. Kienberger, J. E. McCall, Union Carbide Nuclear Company. Oak Ridge Gaseous Diffusion Plant, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Aqueous static corrosion of aluminum alloys coupled to stainless steel and zirconium at 350°F (Livermore Research Laboratory, 1954), by P. O. Strom, L. M. Litz, M. H. Boyer, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The fate of deuterons in solid aluminum targets (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by Richard A. Heckman, C. J. Egan, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Reproducibility of 480 F. static aqueous corrosion of pure aluminum (Livermore Research Laboratory, 1954), by P. O. Strom, L. M. Litz, M. H. Boyer, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Aluminum-electrocladding studies for proposed organic moderated reactors fuel elements (Atomics International, 1958), by G. V. Alm, M. H. Binstock, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Role of Si, Al, and other impurities in BeO crystal growth (Canoga Park, California : Atomics International, 1963., 1963), by S. B. Austerman, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effects of irradiation on the x-ray line shape of 2S aluminum from a Handford water cooling tube (Massachusetts Institute of Technology, 1952), by J. L. Klein, W. B. Nowak, Massachusetts Institute of Technology, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Radiation damage in 99.0% aluminum (Cambridge, MA : Massachusetts Institute of Technology, 1952., 1952), by J. L. Klein, W. B. Nowak, Massachusetts Institute of Technology, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Rapid determination of aluminum in plutonium peroxide cake (Denver, Colorado : Dow Chemical Company, Rocky Flats Plant ; Washington, D.C : Office of Technical Services, Department of Commerce, 1964., 1964), by H. N. Barton, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)
• Reactivity of certain uranium oxides with aluminum : terminal report (Oak Ridge, Tennessee : Technical Infromation Service ; Washington, D.C. : Office of Technical Services, Department of Commerce, 1958., 1958), by A. L. Eiss, U.S. Atomic Energy Commission. Division of Reactor Development, and Sylvania-Corning Nuclear Corporation (page images at HathiTrust)
• Solid state bonding of aluminum and nickel (Washington, D.C. : Office of Technical Services, Department of Commerce, 1953., 1953), by S. Storchheim, Henry H. Hausner, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Materials survey, aluminum ([Washington, D.C.] : The Administration, 1956), by United States. Business and Defense Services Administration. Aluminum and Magnesium Division and United States. Office of Defense Mobilization (page images at HathiTrust)
• Forming Alcoa aluminum and magnesium. (ACA, 1947), by Aluminum Company of America (page images at HathiTrust; US access only)
• Welding and brazing Alcoa aluminum. (Aluminum company of America, 1942), by Aluminum Company of America (page images at HathiTrust; US access only)
• Fuel bearing fiberglas in aluminum-base fuel elements : final Report (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1962., 1962), by R. H. Baskey, Clevite Corporation, and U.S. Atomic Energy Commission. Division of Technical Information (page images at HathiTrust)
• The photometric determination of aluminum in phosphate materials with ferron (Washington, D.C. : U.S. Dept. of the Interior, Geological Survey, [1954], 1954), by Maryse Delevaux, F. S. Grimaldi, Roberta Smith, U.S. Atomic Energy Commission. Division of Raw Materials, and Geological Survey (U.S.) (page images at HathiTrust)
• Machining Alcoa aluminum. (Pittsburgh, 1951), by Aluminum Company of America (page images at HathiTrust; US access only)
• Lighter structures : two articles on an important development in the aluminum industry. (New York, 1929), by Robert Leroy Streeter (page images at HathiTrust)
• Technique for evaluating sedimentation at river mouths (The Institute, 1973), by Donald S. Sasscer, Aviva E. Gileadi, Knub B. Pedersen, United States. Office of Water Resources Research, and University of Puerto Rico (Mayagüez Campus). Water Resources Research Institute (page images at HathiTrust; US access only)
• Cross sections for formation of NA²² from aluminum and magnesium bombarded with protons (Livermore, California : Livermore Research Laboratory, 1953., 1953), by R. E. Betzel, G. H. Coleman, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Designing with aluminum extrusions ([s.n.], 1958), by Reynolds Metals Company and H. V. Menking (page images at HathiTrust; US access only)
• Finishes for ALCOA aluminum. (Aluminum Co. of America, 1948), by Aluminum Company of America (page images at HathiTrust; US access only)
• Aluminum powders and pastes; "The tale of the powdered pig." (Technical Editorial Service, Reynolds Metals Co., 1957), by Reynolds Metals Company and G. W. Birdsall (page images at HathiTrust; US access only)
• Forming aluminum. (Richmond, 1961), by Reynolds Metals Company (page images at HathiTrust; US access only)
• The determination of free acid in solutions of aluminum and thorium and uranyl nitrates (Knolls Atomic Power Laboratory, General Electric Company, 1956), by M. E. Jones, H. C. Hendrickson, B. F. Rider, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Aluminum in the textile industry (The Company, 1948), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Expanding markets for aluminum (The Association, 1955), by Aluminum Association (page images at HathiTrust; US access only)
• Effect of aluminum doping on the thermal stability of 4H- and 6H-SiC (L.G. Hanscom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1971., 1971), by Mamoru Mitomo, Mahito Kumanomido, Yoshizō Inomata, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Investigation of the national defense program : interim report, Special Committee No. 3 on Materiel, Procurement, and Personnel, Committee on Military Affairs, House of Representatives, seventy-seventh Congress, second session, pursuant to H. Res. 162, a resolution authorizing the Committee on Military Affairs and the Committee on Naval Affairs to study the progress of the national defense program. (U.S. GPO, 1942), by United States. Congress. House. Committee on Military Affairs (page images at HathiTrust)
• Aluminum, its story. (Aluminum company of America, 1940), by Aluminum Company of America (page images at HathiTrust; US access only)
• The activation of sodium, manganese, and aluminum in Nevada Test Site soil (San Francisco, California : U.S. Naval Radiological Defense Laboratory, 1961., 1961), by F. M. Tomnovec and U.S. Naval Radiological Defense Laboratory (page images at HathiTrust)
• The disposition of na, mn, and al at two California beaches (San Francisco, California : U.S. Naval Radiological Defense Laboratory, 1963., 1963), by F. M. Tomnovec, J. M. Ferguson, and U.S. Naval Radiological Defense Laboratory (page images at HathiTrust)
• Materials survey: aluminum. ([Washington, 1957), by United States. Business and Defense Services Administration. Aluminum and Magnesium Division and United States. Office of Defense Mobilization (page images at HathiTrust)
• Die Aluminium-industrie-aktiengesellschaft Neuhausen, und ihre konkurrenz-gesellschaften (J.M. Albins erben, 1912), by C. Dux (page images at HathiTrust; US access only)
• An Equation of state for shocked polyurethane foam (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California / by Charles L. Mader and William J. Carter., 1969), by Charles L. Mader, W. J. Carter, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The fluorimetric determination of aluminum in phosphate rock with 8-hydroxyquinoline (Washington, D. C. : U.S. Dept. of the Interior, Geological Survey, 1950., 1950), by F. S. Grimaldi, Harry Levine, U.S. Atomic Energy Commission. Raw Materials Operations, and Geological Survey (U.S.) (page images at HathiTrust)
• Flameless atomic absorption apparatus for analyzing alpha-radioactive materials (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1974., 1974), by Lawrence E. Cox, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The effect of surface-active agents on the mechanical properties of metals (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, U.S. Air Force, 1961., 1961), by I. R. Kramer, United States. Air Force. Air Research and Development Command, and Wright Air Development Division (page images at HathiTrust)
• Reduction of the endurance limit as a result of stress interaction in fatugue (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, U.S. Air Force, 1961., 1961), by Robert A. Heller, United States. Air Force. Air Research and Development Command, Columbia University, and Wright Air Development Division (page images at HathiTrust)
• Photoelectron emission in the extreme ultraviolet region (L. G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1966., 1966), by L. Herous, Charles W. Chagnon, R. G. Newburgh, J. E. Manson, M. Cohen, W. J. McMahon, D. E. Bedo, H. E. Hinteregger, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Resistance of adhesive-bonded metal lap joints to environmental exposure (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1962., 1962), by W. Z. Olson, R. M. Lulling, Herbert W. Eickner, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of stress on the creep rate of high purity aluminum in the cross-slip region (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1961., 1961), by N. Jaffe, J. E. Dorn, United States. Air Force. Air Research and Development Command, Wright Air Development Division, and Berkeley University of California (page images at HathiTrust)
• Cermet preparation by reactions in the iron-aluminum-oxygen system (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957., 1960), by Alfred Siede, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Phase relationships in the system iron-aluminum-oxygen (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957., 1957), by Leon M. Atlas, William K. Sumida, United States. Air Force. Air Research and Development Command, Wright Air Development Center, Illinois Institute of Technology. Technology Center, and Armour Research Foundation (page images at HathiTrust)
• Aluminium and its alloys, their properties, thermal treatment and industrial application (D. Van Nostrand co., 1922), by C. Grard, Henry Wilfred Lewis Phillips, and C. M. Phillips (page images at HathiTrust)
• Backemission of electrons from metals Irradiated by 0.2 MeV to 1.4 MeV electrons (L.G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1971., 1971), by A. R. Frederickson, A. Matthewson, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Interface dose as a function of angle of incidence for aluminum-gold and aluminum-beryllium slabs (Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1975), by Lester F. Lowe, J. R. Cappelli, W. C. Taylor, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Energy absorption of a specific aluminum honeycomb (Wright-Patterson Air Force Base, Ohio : Directorate of Engineering Test, Deputy for Test and Support, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Edward H. Schell and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Backdirected electron yields from metals bombarded by 0.4-MeV to 1.4-MeV electrons (L.G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1969., 1969), by A. R. Frederickson and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Manganese-Aluminum for permanent magnet material (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by M. A. Bohlmann, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Indiana General Corporation (page images at HathiTrust)
• Forming Alcoa aluminum. (Pittsburgh : [publisher not identified], [1961], 1961), by Aluminum Company of America (page images at HathiTrust; US access only)
• Ultrasonic methods for the study of stress cycling effects in metals (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Materials Central, Air Force Systems Command, United States Air Force, 1961., 1961), by Rohn Truell, William Findley, Charles Elbaum, George Watkins Anderson, Bruce Chick, Brown University. Division of Applied Mathematics, United States. Air Force. Systems Command, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Thermophysical properties of thermal energy storage materials - Aluminum (L.G. Hanscom Field, Massachusetts : Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1973., 1973), by Clare C. Leiby, Thomas G. Ryan, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Designing for aluminum extrusions. (Oakland, Ca : [publisher not identified], [1963], 1963), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust; US access only)
• Fastening methods for aluminum (Reynolds Metals Co., 1958), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Long duration exposure facility mini-data base user's guide : IBM-compatible PC computer version (National Aeronautics and Space Administration, Langley Research Center, 1995), by G. L. Bohnhoff-Hlavacek, H. W. Dursch, H. Gary Pippin, and Langley Research Center (page images at HathiTrust)
• Long duration exposure facility mini-data base user's guide : Macintosh version (National Aeronautics and Space Administration, Langley Research Center, 1995), by G. L. Bohnhoff-Hlavacek, H. W. Dursch, H. Gary Pippin, and Langley Research Center (page images at HathiTrust)
• Aluminum company of America. Report of the special assistant to the attorney general, William R. Benham, together with memorandum of the special assistant to the attorney general John L. Lott, and memorandum of law by special assistant to the attorney general Abram F. Myers concerning alleged violation by the Aluminum company of America of the decree entered against it in the United States District court for the western district of Pennsylvania on June 7, 1912. (Govt. print. off., 1926), by United States Department of Justice, David Aiken Reed, Abram Fern Myers, John L. Lott, and William R. Benham (page images at HathiTrust)
• Welding and brazing Alcoa aluminum. (Aluminum Company of America, 1947), by Aluminum Company of America (page images at HathiTrust; US access only)
• Windows of Alcoa aluminum (Pittsburgh, Pa. : Aluminum Company of America 1938, 1938), by Aluminum Company of America (page images at HathiTrust; US access only)
• Machining aluminum and aluminum alloys. (Pittsburgh, Pa. : Aluminum Company of America, 1941., 1941), by Aluminum Company of America (page images at HathiTrust; US access only)
• Aluminum : a chapter from Mineral facts and problems (United States Government Printing Office, 1976), by John W. Stamper, Horace F. Kurtz, and United States Bureau of Mines (page images at HathiTrust)

More items available under broader and related terms at left.