The Online Books Page

Aluminum alloys

See also what's at Wikipedia, your library, or elsewhere.

• Light metal alloys

• Aluminum bronze
• Aluminum founding
• Aluminum-chromium alloys
• Aluminum-copper alloys
• Aluminum-lithium alloys
• Aluminum-magnesium alloys
• Aluminum-magnesium-silicon alloys
• Aluminum-magnesium-zinc alloys
• Aluminum-manganese alloys
• Aluminum-silicon alloys
• Aluminum-uranium alloys
• Aluminum-zinc alloys
• Aluminum-zirconium alloys
• Iron-aluminum alloys
• Iron-molybdenum-aluminum alloys
• Nickel-aluminum alloys
• Nickel-chromium-aluminum alloys
• Rare earth-silicon-iron-aluminum alloys
• Steel-aluminum alloys
• Titanium-aluminum alloys
• Titanium-aluminum-vanadium alloys

• Aluminium alloy

• Alcoa Structural Handbook: A Design Manual for Aluminum (revised edition; Pittsburgh: Aluminum Company of America, c1958), by Aluminum Company of America (page images at HathiTrust)
• Interim summary report on the development program for resistance, spot and seam welding of aluminum alloys. Phase III: Development and standardization of design criteria. (Akron, Ohio, 1956), by Goodyear Aircraft Corporation (page images at HathiTrust; US access only)
• Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire, and all forms of structural shapes / (Pittsburgh, Pa. : Ewens & Eberle, 1903), by Pittsburgh Reduction Company and Alfred E. Hunt (page images at HathiTrust)
• Welding and brazing Alcoa aluminum. (Pittsburgh, Pa. : Aluminum company of America, 1942), by Aluminum Company of America (page images at HathiTrust; US access only)
• Alcoa aluminum in automatic screw machines. (Pittsburgh : Aluminum Company of America, 1949), by Aluminum Company of America. cn (page images at HathiTrust)
• Literature survey - weldable high strength aluminum alloys / [by] W. G. Fricke, Jr. [and others] (New Kensington, Pa. : Alcoa Research Laboratories, Aluminum Company of America, 1963), by William George Fricke (page images at HathiTrust; US access only)
• The effect of artificial aging on the tensile properties of alclad 24S-T and 24S-T aluminum alloy / (Langley Field, VA : Langley Memorial Aeronautical Laboratory, 1943), by Joseph N. Kotanchik, George W. Zender, Walter Woods, United States. National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• The Pittsburgh Reduction Co. : Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire, and all forms of structural shapes . (Pittsburgh : The Myers & SHinkle company, printers, 1898), by Pittsburgh Reduction Company (page images at HathiTrust)
• Carbide coated fibers in graphite-aluminum composites : progress report / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975-1976]), by Richard J. Imprescia, Langley Research Center, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Influence of programing techniques and of varying limit load factors on maneuver load fatigue test results / (Washington, D.C. : National Aeronautics and Space Administration, 1966), by Patrick L. Corbin, Eugene C. Naumann, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• An experimental and theoretical investigation of plane-stress fracture of 2024-T351 aluminum alloy / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1970), by C. E. Feddersen, Langley Research Center, and Battelle Memorial Institute. Columbus Laboratories (page images at HathiTrust)
• Analytical and experimental investigation of fatigue in a sheet specimen with an interference-fit bolt / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by John H. Crews and Langley Research Center (page images at HathiTrust)
• Design of a convective cooling system for a Mach 6 hypersonic transport airframe / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1971), by R. G. Helenbrook, F. M. Anthony, Langley Research Center, and Bell Aerospace Company (page images at HathiTrust)
• Surface effects on hydrogen permeation through Ti-14Al-21Nb alloy / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1991), by Sankara Narayan Sankaran, Ronald K. Clark, R. A. Outlaw, and Langley Research Center (page images at HathiTrust)
• Effects of changing stress amplitude on the rate of fatigue-crack propagation in two aluminum alloys / (Washington, [D.C.] : National Aeronautics and Space Administration, 1961), by C. M. Hudson, Herbert F. Hardrath, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Deterioration of some aluminum alloys in the presence of mercury and cesium / (Washington : National Aeronautics and Space Administration : Springfield, Va. : for sale by the National Technical Information Service, 1964), by William Rostoker, United States National Aeronautics and Space Administration, and IIT Research Institute (page images at HathiTrust)
• Integration of NASA-sponsored studies on aluminum welding / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Koichi Masubuchi, George C. Marshall Space Flight Center, and Massachusetts Institute of Technology (page images at HathiTrust)
• The stress corrosion susceptibility of several alloys in hydrazine fuels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by William Gilbreath, Michael J. Adamson, and Ames Research Center (page images at HathiTrust)
• Tests of aerodynamically heated multiweb wing structures in a free jet at mach number 2 : five aluminum-alloy models of 20-inch chord with 0.064-inch-thick skin, 0.025-inch-thick webs, and various chordwise stiffening at 2° angle of attack / (Washington [D.C.] : National Aeronautics and Space Administration, [1960]), by Donald H. Trussell, Robert G. Thomson, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Oxidation characteristics of Ti-14Al-21Nb alloy / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Sankara Narayan Sankaran and Langley Research Center (page images at HathiTrust)
• Cellular aluminum for use in energy dissipation systems / ([Washington] National Aeronautics and Space Administration, [1964]), by S. Lipson, Frankford Arsenal (Pa.), and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Creep bending and buckling of thin circular cylindrical shells / (Washington, [D.C.] : National Aeronautics and Space Administration, 1960), by Burton Erickson and Polytechnic Institute of Brooklyn (page images at HathiTrust)
• Evaluation of the influence of load randomization and of ground-air-ground cycles on fatigue life / (Washington, D.C. : National Aeronautics and Space Administration, 1964), by Eugene C. Naumann, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Preliminary investigation of effect of environmental factors on salt stress corrosion cracking of Ti-8Al-lMO-lV at elevated temperatures / (Washington, D.C. : National Aeronautics and Space Administration ; Washington, D.C. : For sale by the Office of Technical Services, Department of Commerce [distributor], 1964), by D. N. Braski and Langley Research Center (page images at HathiTrust)
• The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1970), by J. D. Boyd, United States National Aeronautics and Space Administration, and Battelle Memorial Institute (page images at HathiTrust)
• Failure analysis of aluminum alloy components / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Om Johari, Joseph Staschke, Irene Corvin, Langley Research Center, and IIT Research Institute (page images at HathiTrust)
• Fatigue of four stainless steels, four titanium alloys, and two aluminum alloys before and after exposure to elevated temperatures for up to three years / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1971), by Walter Illg, L. A. Imig, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue-crack-propagation and fracture-toughness characteristics of 7079 aluminum-alloy sheets and plates in three aged conditions, ([Washington] National Aeronautics and Space Administration; for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va., [1968]), by S. H. Smith, W. D. Sump, T. R. Porter, Langley Research Center, and Boeing Company (page images at HathiTrust)
• Experimental and analytical investigations on multiple liquid impact erosion / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969), by A. Thiruvengadam, S. L. Rudy, United States National Aeronautics and Space Administration, and inc Hydronautics (page images at HathiTrust)
• Correlation of stress-wave-emission characteristics with fracture aluminum alloys / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by Carl E. Hartbower and Advanced Technology. Aerojet Solid Propulsion Company (page images at HathiTrust)
• Effects of loading sequence for notched specimens under high-low two-step fatigue loading / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1971), by John H. Crews, United States. National Aeronautical and Space Administration, and Langley Research Center (page images at HathiTrust)
• Effect of specimen thickness on fatigue-crack-growth behavior and fracture toughness of 7075-T6 and 7178-T6 aluminum alloys / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Charles Michael Hudson, J. C. Newman, and Langley Research Center (page images at HathiTrust)
• The application of acoustic emission technique to fatigue crack measurement / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Jag J. Singh, John H. Crews, William T. Davis, and Langley Research Center (page images at HathiTrust)
• Report to the Alloys Research Committee. (London : Institution of Mechanical Engineers, 1891-1921), by Institution of Mechanical Engineers (Great Britain). Alloys Research Committee (page images at HathiTrust; US access only)
• A preliminary study of aluminum-zinc-nickel alloys : with special reference to their micro structure / (1919), by Herbert Martin Edward Heinicke (page images at HathiTrust; US access only)
• Range of interface thermal conductance for aircraft joints / (Washington, [D.C.] : National Aeronautics and Space Administration, 1960), by Martin E. Barzelay and Syracuse University (page images at HathiTrust)
• The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1953]), by Herbert W. Eickner, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Irradiation of an aluminum alloy-clad ceramic pellet-fueled plate / (Argonne, Ill. : Argonne National Laboratory, Reactor Engineering Division, 1960), by A. P. Gavin and Argonne National Laboratory (page images at HathiTrust)
• Breeding-gain specimens for EBR-I Core IV / (Argonne, Ill. : Argonne National Laboratory, Metallurgy Division, 1963), by A. B. Shuck and Argonne National Laboratory (page images at HathiTrust)
• Metallographic study of the annealing behavior of aluminum-silicon eutectic alloy / (Richland, Washington : U.S Atomic Energy Commission, 1961), by R. H. Todd, Hanford Atomic Products Operation, U.S. Atomic Energy Commission, and Pacific Northwest Laboratory (page images at HathiTrust)
• Recovery of metals using aluminum displacement / (Cincinnati, OH : Hazardous Waste Engineering Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1988), by Steven C. Meyers, James S. Bridges, Minnesota Technical Assistance Program, Minnesota Waste Management Board, and Hazardous Waste Engineering Research Laboratory (page images at HathiTrust)
• Tentative standards and recommended practices and procedures for spot welding of aluminum alloys / (New York, N.Y. : The Society, c1942), by American Welding Society. Aircraft Welding Standards Committee and Resistance Welder Manufacturers' Association (page images at HathiTrust; US access only)
• Aluminum and aluminum alloys. (Washington, D.C. : U.S. Dept. of Defense, 1966-), by United States. Dept. of Defense (page images at HathiTrust)
• Correlation of creep-buckling tests with theory / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by Sharad A. Patel and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Static shear strength of 2117-T4 (A17s-T4) aluminum-alloy rivets at elevated temperatures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by W. J. Dewalt, K. O. Bogardus, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Alcoa aluminum and its alloys. (Pittsburgh, Pa., Aluminum Company of America, 1940), by Aluminum Company of America (page images at HathiTrust; US access only)
• The heat-treatment and annealing of aluminum and its alloys; (Cleveland, Sherwood Pr., 1933), by N. F. Budgen (page images at HathiTrust)
• New processing techniques for aluminum alloys / (Springfield, Va. : National Technical Information Service, 1972), by J. Waldman, H. Sulinsky, and H. Markus (page images at HathiTrust)
• Fatigue testing of 2024-T3 material after four cycles of PMB stripping / (Atlantic City International Airport, N.J. : Federal Aviation Administration Technical Center ; Springfield, Va. : Available through the National Technical Information Service, [1993]), by Mark Muller, Charles C. T. Chen, Galaxy Scientific Corporation, and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)
• The effect of continuous weathering on light metal alloys used in aircraft / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Willard Mutchler and United States. National Bureau of Standards (page images at HathiTrust)
• Cyclic creep buckling of integrally stiffened aluminum alloy panels (Wright-Patterson Air Force Base, Ohio, Wright Air Development Center, Air Research and Development Command, U.S. Air Force, 1958), by C. W. King and B. J. Nolan (page images at HathiTrust)
• Aluminum in aircraft. (Pittsburgh, Pa., Aluminum company of America, [c1930]), by Aluminum Company of America (page images at HathiTrust)
• Strong aluminum alloys. (Pittsburgh, Pa., Aluminum Company of America, [c1928]), by Aluminum Company of America (page images at HathiTrust)
• Aluminum in architecture. (Pittsburgh, Pa., Aluminum company of America, 1932), by Aluminum Company of America (page images at HathiTrust)
• Investigation of fatigue-crack growth under simple variable-amplitude loading / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by C. M. Hudson, K. N. Raju, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• An experimental and analytical vibration study of thin cylindrical shells with and without longitudinal stiffeners, ([Washington] National Aeronautic and Space Administration; for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va., [1968]), by John L. Sewall and Eugene C. Naumann (page images at HathiTrust; US access only)
• Experimental investigation of parameters and materials for fragmenting-tube energy-absorption process / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1966), by John R. McGhee, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Local plastic stresses in sheet aluminum-alloy specimens with stress-concentration factor of 2 under constant-amplitude loading / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va. 22151], 1965), by John H. Crews, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Richard A. Pride and Langley Research Center (page images at HathiTrust)
• Fatigue properties of aluminum alloys at various direct stress ratios (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, 1953), by B.J. Lazan and A. A. Blatherwick (page images at HathiTrust; US access only)
• Fatigue life under random loading for several power spectral shapes / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by Sherman A. Clevenson, Roy Steiner, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Chemical analysis of aluminum : methods developed and standardized / (New Kensinton, Pa. : Aluminum Research Laboratories, 1950), by Aluminum Company of America and H. V. Churchill (page images at HathiTrust)
• Aluminum in aircraft. (Pittsburgh, Pa., Aluminum company of America., 1943), by Aluminum Company of America (page images at HathiTrust)
• Casting aluminum. (Richmond, 1960), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Alcoa aluminum in architecture : alloys, fabrication, products, finishes. ([Pittsburgh, Pa., 1951?]), by Aluminum Company of America (page images at HathiTrust; US access only)
• Effect of loading sequence on cumulative fatigue damage of 7075-T6 aluminum alloy / (Urbana, Ill. : Dept. of Theoretical and Applied Mechanics, University of Illinois, 1961), by Robert Spitzer, H. T. Corten, and University of Illinois (Urbana-Champaign campus). Dept. of Theoretical and Applied Mechanics (page images at HathiTrust; US access only)
• Morphology of an aluminum alloy eroded by a jet of angular particles impinging at normal incidence / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by P. Veerabhadra Rao, Donald H. Buckley, Stanley G. Young, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effects of thermal cycling on graphite-fiber-reinforced 6061 aluminum / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1986), by Gregory A. Dries, Stephen S. Tompkins, and Langley Research Center (page images at HathiTrust)
• Effect of service usage on tensile, fatigue, and fracture properties of 7075-T6 and 7178-T6 aluminum alloys / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Richard A. Everett and Langley Research Center (page images at HathiTrust)
• Metallurgical characterization of the fracture of several high strength aluminum alloys / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by M. Dilip Bhandardar, W. Barry Lisagor, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Effects of continuous and cyclic thermal exposures on boron-and borsic-reinforced 6061 aluminum composites / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by George C. Olsen, Stephen S. Tompkins, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Time dependence of solid-particle impingement erosion of an aluminum alloy / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by P. Veerabhadra Rao, Donald H. Buckley, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Some measurements of noise transmission and stres response of a 0.020-inch duralumin panel in the presence of air flow. / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, [1960]), by George T. Kantarges and Lewis Research Center (page images at HathiTrust)
• Some experiments concerning subsequent yield surfaces in plasticity / (Washington : National Aeronautics and Space Administration, [1960]), by Harvey G. McComb and Langley Research Center (page images at HathiTrust)
• An investigation of nonpropagating fatigue cracks / (Washington : National Aeronautics and Space Administration, [1959]), by A. J. McEvily, Walter Illg, and Langley Research Center (page images at HathiTrust)
• Tensile properties and creep strength of three aluminum alloys exposed up to 25,000 hours at 200 ̊to 400 ̊F (370 ̊to 480 ̊K) (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Dick M. Royster, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• A preliminary investigation of the destruction of solid-propellant rocket motors by impact from small particles / (Washington : National Aeronautics and Space Administration, [1960]), by David J. Carter and Langley Research Center (page images at HathiTrust)
• Axial-load fatigue tests using loading schedules based on maneuver-load statistics. Eugene C. Naumann and Russell L. Schott. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by Eugene C. Naumann, Russell L. Schott, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Friction, wear, and adhesion characteristics of titanium-aluminum alloys in vacuum / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Donald H. Buckley, Robert L. Johnson, and Lewis Research Center (page images at HathiTrust)
• Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, 1962]), by Avraham Berkovits and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Unified notch-strength analysis for wrought aluminum alloys. Paul Kuhn and I.E. Figge. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by Paul Kuhn, I. E. Figge, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• An evaluation of some current practices for short-time elevated-temperature tensile tests of metals / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, [1960]), by Charles R. Manning, George J. Heimerl, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue of liquid rocket engine metals at cryogenic temperatures to -452 ̊F (4 ̊K) / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Alfred J. Nachtigall, John C. Freche, Stanley J. Klima, and Lewis Research Center (page images at HathiTrust)
• Flaw growth behavior in thick welded plates of 2219-T87 aluminum at room and cryogenic temperatures [electronic resource] / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Royce G. Forman, James D. Medlock, Samuel V. Glorioso, United States National Aeronautics and Space Administration, and Lyndon B. Johnson Space Center (page images at HathiTrust)
• Wear of aluminum and hypoeutectic aluminum-silicon alloys in boundary-lubricated pin-on-disk sliding / (Washington : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1979), by John Ferrante, William A. Brainard, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Long-term thermal degradation and alloying constituent effects on five boron/aluminum composites / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by George C. Olsen and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Semiconductor diode laser material and devices with emission in visible region of the spectrum / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]), by I. Ladany, Henry Kressel, Langley Research Center, and RCA Laboratories (page images at HathiTrust)
• Carbide coated fibers in graphite-aluminum composites / (Washington : U.S. National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by Richard J. Imprescia, United States National Aeronautics and Space Administration, Los Alamos Scientific Laboratory, and Langley Research Center (page images at HathiTrust)
• Residual-static-strength and slow-crack-growth behavior of duplex-annealed Ti-8Al-1Mo-1V sheet / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by I. E. Figge, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue-crack initiation and growth in notched 2024-T 3 specimens monitored by a video tape system / (Washington : U.S. National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by J. A. Sova, R. J. Exton, John H. Crews, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Experimental investigation of the momentum transfer associated with impact into thin aluminum targets (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1969]), by C. Nysmith, B. Denardo, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of stress ratio on fatigue-crack growth in 7075-T6 and 2024-T3 aluminum-alloy specimens / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by C. M. Hudson, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• The rate of fatigue-crack propagation for two aluminum alloys under completely reversed loading (Washington, D.C. : National Aeronautics and Space Administration, 1959), by Walter Illg and Arthur J. McEvily (page images at HathiTrust)
• A material selection method based on material properties and operating parameters [electronic resource] / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Wolf Elber, John R. Davidson, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Design specifications for bridges and structures of aluminum alloy 27S-T / (Pittsburgh : Aluminum Co. of America, 1940), by Leon Solomon Moisseiff (page images at HathiTrust)
• Alcoa aluminum and its alloys. (Pittsburg : The company, 1950), by Aluminum Company of America (page images at HathiTrust)
• Eleventh report to the Alloys Research Committee on some alloys of aluminium (light alloys) (London, By authority of the Council, 1921), by Walter Rosehain, D. Hanson, S. L. Archbutt, National Physical Laboratory (Great Britain), and Institution of Mechanical Engineers (Great Britain). Alloys Research Committee (page images at HathiTrust; US access only)
• Correlation of literature on the effect of testing temperature on the mechanical properties of wrought aluminum base alloys. ([Washington, D.C.] U.S. Office of Technical Services, [1955]), by Helen R. Pritchard (page images at HathiTrust)
• The detection of fatigue cracks by nondestructive testing methods / (Washington : National Aeronautics and Space Administration, 1974), by Ward D. Rummel and Martin Marietta Aerospace. Denver Division (page images at HathiTrust; US access only)
• Demonstration of advanced conductors for overhead transmission lines : 1017448 : final project report /, by issuing body California Energy Commission. Energy Research and Development Division, Electric Power Research Institute, and J. Chan (page images at HathiTrust)
• Prediction of fatigue-crack-propagation behavior in panels with simulated rivet forces., by United States National Aeronautics and Space Administration, I. E. Figge, J. C. Newman, and Langley Research Center (page images at HathiTrust; US access only)
• The aluminum industry / (New York [etc.] : McGraw-Hill book company, inc., 1930), by Junius David Edwards, Zay Jeffries, Francis C. Frary, and Aluminum Company of America (page images at HathiTrust)
• The aluminum data book; Reynolds aluminum alloys and mill products. (Louisville, Ky., 1954), by Reynolds Metals Company (page images at HathiTrust)
• Alcoa aluminum in automatic screw machines. (Pittsburgh, [c1955]), by Aluminum Company of America (page images at HathiTrust)
• Forming aluminum. ([Pittsburgh, Aluminum company of America, 1941]), by Aluminum Company of America (page images at HathiTrust)
• Investigation of bearing creep of two forged aluminum alloys / (Washington : U.S. Dept. of Commerce, Office of Technical Services, 1960), by Leonard Mordfin, Philip J. Granum, and Nixon Halsey (page images at HathiTrust)
• Tensile creep of boron/epoxy and boron/epoxy-reinforced 7075-T6 aluminum alloy / (Washington : U.S. National Bureau of Standards : For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1972), by Daniel J. Chwirut and Langley Research Center (page images at HathiTrust)
• Tensile behavior of boron/epoxy-reinforced 7075-T6 aluminum alloy at elevated temperatures / (Washington : National Bureau of Standards : For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1974), by Daniel J. Chwirut, George F. Sushinsky, and United States. National Bureau of Standards (page images at HathiTrust)
• Analytical methods for aluminum alloys. (Chicago, [1948]), by Ill.) Aluminum Research Institute (Chicago (page images at HathiTrust)
• Aluminum and aluminum alloys in the form of ingots, castings, bars, plates, sheets, tubes, wire and all forms of structural shapes ... (Pittsburgh, Pa., 1897), by Aluminum Company of America, ed. by Alfred E. Hunt (page images at HathiTrust)
• Report on the elevated-temperature properties of aluminum and magnesium alloys / (Philadelphia : American Society for Testing Materials, [1960]), by H. R. Voorhees, J. W. Freeman, and Joint Committee on Effect of Temperature on the Properties of Metals (page images at HathiTrust)
• The metallurgy of aluminium and aluminium alloys. (New York : Baird, 1925), by Robert John Anderson (page images at HathiTrust)
• Chemical analysis of aluminum; (New Kensington, Pa., Aluminum Research Laboratories, 1950), by Aluminum Company of America and H. V. Churchill (page images at HathiTrust)
• Structural aluminum handbook. (Pittsburgh, Pa. : Aluminum company of America, 1940), by Aluminum Company of America (page images at HathiTrust)
• Chemical analysis of aluminum; (New Kensington, Pa., Aluminum research laboratories, 1935), by Aluminum Company of America, R. W. Bridges, and H. V. Churchill (page images at HathiTrust)
• Aluminum in aircraft. (Pittsburgh, Pa., Aluminum company of America, 1941), by Aluminum Company of America (page images at HathiTrust)
• ALCOA structural handbook. (Pittsburgh : Aluminum Company of America, 1948), by Aluminum Company of America (page images at HathiTrust)
• Standard methods for the sampling and analyzing of aluminum and certain aluminum alloys. (Chicago, Aluminum research institute, [c1939]), by Ill.) Aluminum Research Institute (Chicago (page images at HathiTrust)
• Aluminum casting alloys and alloys for other purposes. (Pittsburgh, Pa., Aluminum Company of America, 1941), by Aluminum Company of America (page images at HathiTrust; US access only)
• On stress interaction in fatigue and cumulative damage rule : part II. 7075 aluminum alloy /, by Alfred M. Freudenthal, Robert A. Heller, United States. Air Force. Air Research and Development Command. sponsor, and Wright Air Development Center issuing body (page images at HathiTrust)
• Undissolved uranium aluminide in reprocessing of test reactor ruels /, by B. E. Paige, V. H. Barnes, M. E. Jacobson, T. L. Evans, sponsor U.S. Atomic Energy Commission. Idaho Operations Office, issuing body Allied Chemical Corporation, and issuing body Aerojet-General Corporation (page images at HathiTrust)
• Corrosion behavior of aluminum alloys in high temperature, pressurized water /, by Alan B. Riedinger, Knolls Atomic Power Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The creep properties of metals under intermittent stressing and heating conditions., by Lawrence A. Shepard, John E. Dorn, Carl D. Wiseman, C. Dean Starr, United States. Air Force. Air Research and Development Command. sponsor, issuing body Wright Air Development Center, sponsor Aerospace Medical Laboratory (U.S.), and sponsor University of California (page images at HathiTrust)
• Controlled nitric acid dissolution of aluminum-plutonium alloys /, by Wallace W. Schulz, sponsor U.S. Atomic Energy Commission, and issuing body Atlantic Richfield Hanford Company (page images at HathiTrust)
• Aluminum, the metal and its alloys (a critical descriptive treatise) by M. G. Corson (M. G. Korunsky) (New York, D. Van Nostrand company, 1926), by Michael George Corson and Joseph Ramón Vilella (page images at HathiTrust; US access only)
• Improvement of a commercial hypereutectic aluminum-silicon master alloy / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by R. R. Lowery, Haruo Kat©Æo, Jack G. Croeni, and United States Bureau of Mines (page images at HathiTrust)
• Improvement of the corrosion resistance of aluminum brass for use in seawater conversion plants / ([Washington, D.C.] : U.S. Dept. of the Interior; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1970 [i.e. 1971]), by Maurice A. H. Howes and United States. Office of Saline Water (page images at HathiTrust)
• Forming Alcoa aluminum. (Pittsburgh : Aluminum Co. of America, c1962), by Aluminum Company of America (page images at HathiTrust; US access only)
• Corrosion of aluminum and its alloys in superheated steam / (Argonne, Ill. : Argonne National Laboratory, 1961), by J. E. Draley, S. Greenberg, W. E. Ruther, U.S. Atomic Energy Comission. ANL, and Argonne National Laboratory. Metallurgy Division. ANL (page images at HathiTrust)
• The corrosion of aluminum alloys in high-velocity water at 170 to 290⁰C / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1961), by J. L. English, J. C. Griess, L. Rice, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The corrosion of aluminum alloys in the Oak Ridge Research Reactor / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1961), by P. D. Neumann, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• Behavior of chemical nickel plate on aluminum alloys in high temperature, dynamic, aqueous systems / (Richland, Wash. : Hanford Atomic Products Operation, 1964), by A. B. Jr Johnson, U.S. Atomic Energy Commission. UC., United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. AEC research and development report, and Hanford Atomic Products Operation (page images at HathiTrust)
• Thermal expansion of beryllium and aluminum-beryllium alloys / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1927), by Peter Hidnert, W. T. Sweeney, and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust)
• Boral : a new thermal neutron shield / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1954), by V. L. McKinney, Theodore Rockwell, Oak Ridge National Laboratory. Technical Division and Reactor Experimental Engineering Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The development of aluminum-6 per cent magnesium wrought alloys for elevated-temperature service and their resistance to corrosion in water at temperatures up to 600⁰F / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1950), by K. Grube, L. W. Eastwood, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Nitric acid dissolution of uranium-aluminum alloy / (Richland, Wash. : Hanford Works, 1952), by R. E. Burns, C. H. Holm, General Electric Company, Hanford Works, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Creep of 4S-O, J51S, and number 22 brazing-sheet aluminum alloys at 300 F / (Columbus, Ohio : Battelle Memorial Institute, 1953), by J. T. Stacy, G. R. Remely, J. A. VanEcho, Henry A. Saller, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Creep-rupture properties of 6061-T6 aluminum alloy at 450 and 500 F / (Columbus, Ohio. : Battelle Memorial Institute : United States Atomic Energy Commission, 1954), by Henry A. Saller, J. T. Stacy, J. A. VanEcho, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Factors affecting the ductility of iron-chromium-aluminum alloy sheet / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce, [1960]), by Roy W. Endebrock, Ronald F. Dickerson, Ellis L. Foster, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by A. W. Dana, G. Sachs, E. L. Aul, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of open circular holes on tensile strength and elongation of sheet specimens of some aluminum alloys / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by H. N. Hill, R. S. Barker, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Bearing strengths of some aluminum-alloy permanent-mold castings / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by E. M. Finley and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of plastic deformation on subsequent decomposition in aluminum alloys Al-Si and Al-Mg-Si /, by Nikola©Œi Nikolaevich Bu©Œinov, V. P. Savinykh, U.S. Atomic Energy Commission, and National Science Foundation (U.S.) (page images at HathiTrust)
• Corrosion of materials by ethylene glycol-water /, by J. D Jackson, Walter K. Boyd, Frederick W. Fink, P. D. Miller, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Plane-strain fracture-toughness data for selected metals and alloys /, by James E. Campbell and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Stress-corrosion cracking of aluminum alloys : a review of the European literature /, by Gunter Ogiermann and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Environmental corrosion-fatigue behavior of aluminum alloys /, by D. N. Williams and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Summary of corrosion investigations on high-temperature aluminum alloys : October 1957 to December 1959 / (Argonne, Ill. : Argonne National Laboratory, 1961), by Norbert R. Grant, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Reactor Engineering Division. ANL (page images at HathiTrust)
• Film growth on aluminum in high-temperature water / (Argonne, Ill. : Argonne National Laboratory, 1961), by Raymond K. Hart, Westly E. Ruther, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Metallurgy Division. ANL (page images at HathiTrust)
• Swelling of aluminum-clad aluminum-plutonium alloys on postirradiation annealing / (Lemont, III. : Argonne National Laboratory, 1963), by B. A. Loomis, Argonne National Laboratory. ANL., and U.S. Atomic Energy Commission. ANL. (page images at HathiTrust)
• Separation of cast and wrought aluminum alloys by thermomechanical processing / ([Pittsburgh, Pa.] : U.S. Dept. of the Interior, Bureau of Mines, [1985]), by R. D. Brown, D. Montagna, and F. Ambrose (page images at HathiTrust)
• Methane ignition by frictional impact between aluminum alloys and rusted steel / ([Washington, D.C.] : U.S. Bureau of Mines, [1975]), by Donald H. Desy, John S. Risbeck, and L. A. Neumeier (page images at HathiTrust)
• Oxidation of cobalt-nickel-aluminum alloys at 1,351⁰ to 1,429⁰ K / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1971]), by Robert M. Doerr, J. W. Jensen, and United States Bureau of Mines (page images at HathiTrust)
• Chemical spot tests for aluminum alloys / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1971]), by A.W. Maynard, Donald A. Wilson, and United States Bureau of Mines (page images at HathiTrust)
• Deformation textures in uranium-aluminum alloys / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1958), by William Clarence Thurber and U.S. Atomic Energy Commission (page images at HathiTrust)
• Development of silicon-modified 48 Wt % U-Al alloys for aluminum plate-type fuel elements / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1959), by Wm. C. Thurber, R. J. Beaver, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Blowholes, porosity, and unsoundness in aluminum-alloy castings / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1919), by Robert J. Anderson (page images at HathiTrust)
• Erosion-corrosion of aluminum alloys / (Richland, Wash. : Hanford Atomic Products Operation, 1963), by R. L. Dillon, R. S. Hope, U.S. Atomic Energy Commission. AEC research and development report, U.S. Atomic Energy Commission. TID., U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• Observations on the mechanisms and kinetics of aqueous aluminum corrosion II / (Richland, Wash. : Hanford Atomic Products Operation, 1961), by R. L. Dillon, U.S. Atomic Energy Commission. AEC research and develpment report, U.S. Atomic Energy Commission. TID., U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• Fabrication of aluminum clad plutonium-aluminum alloy pin elements / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by L. C. Lemon, W. T. Ross, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Aqueous corrosion of aluminum-plutonium alloys / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by C. H. Bloomster, Y. B. Katayama, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Weld alloying improvement with square type current waves on alternating-current tungsten-arc inert-gas-shielded welding / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by T. B. Correy, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Engineering Operation (page images at HathiTrust)
• Casting aluminum-plutonium alloys / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by C. H. Bloomster, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Fabrication of alumnium-plutonium alloy fuel elements by coextrusion / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by W. T. Ross, Y. B. Katayama, C. H. Bloomster, W. J. Bailey, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Observations on the mechanisms and kinetics of aqueous aluminum corrosion. (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by R. L. Dillon, U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Fabrication of aluminum-plutonium fuel elements for lattice tests in support of PRTR / (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by W. J. Bailey, D. A. Patterson, R. K. Koler, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Plutonium-aluminum fuel element development / (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by M. D. Freshley, U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Mechanical properties of aluminum alloy M-388 : effect of fabrication variables / (Richland, Wash. : U.S. Atomic Energy Commission, 1958), by R. S. Kemper, K. F. Powell, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Intergranular corrosion of aluminum-uranium and aluminum-silicon-uranium alloys / (Richland, Wash. : U.S. Atomic Energy Commission, 1958), by H. C. Bowen, R. L. Dillon, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• High temperature aqueous corrosion of aluminum-plutonium and aluminum-silicon-plutonium alloys / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by H. C. Bowen, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Summary report on the corrosion of aluminum in high temperature dynamic water systems / (Richland, Wash. : U.S. Atomic Energy Commission, 1961), by R. J. Lobsinger, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor Fuels Research and Development Operation (page images at HathiTrust)
• The application of a nominal 48 WT % U-AL alloy to plate-type aluminum research reactor fuel elements / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1958), by W. C. Thurber, R. J. Beaver, J. H. Erwin, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Metallurgy Division (page images at HathiTrust)
• Boron-aluminum and boron-uranium-aluminum alloys for reactor application / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1957), by W. C. Thurber, R. J. Beaver, J. A. Milko, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• High vacuum flange test of a bakeable aluminum wire seal / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by J. D. Redman, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• Mechanical properties of X8001 and 6061 aluminum alloys and aluminum-base fuel dispersion at elevated temperatures / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by W. R. Martin, J. R. Weir, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Advanced test reactor : investigation of the corrosion behavior of materials of construction / (Oak Ridge, Tenn., : U.S. Atomic Energy Commision, Division of Technical Information, 1963), by D. W. Koch, E. E. Ritchie, K. F. Riskevics, and Babcock & Wilcox Company Research Center (page images at HathiTrust)
• Effect of alloying constituents on aluminum dissolution rates / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by R. D. Fletcher, H. R. Beard, M. E. Jacobson, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Some tests of light aluminum casting alloy : The effect of heat treatment / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1919), by Paul Dyer Merica, Corydon Powell Karr, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• The alloy systems uranium-aluminum and uranium-iron / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1950), by Paul Gordon, A. R. Kaufman, Massachusetts Institute of Technology, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The corrosion of aluminum and its alloys / (Richland, Wash. : Hanford Atomic Products Operation, 1955), by C. Groot, R. M. Peekema, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• High temperature aqueous corrosion of commercial aluminum alloys / (Richland, Wash. : Hanford Atomic Products Operation, 1956), by R. L. Dillon, V. H. Troutner, R. E. Wilson, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Boral : a new thermal neutron shield, supplement I / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, [1951]), by A. S. Kitzes, W. Q. Hullings, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Spectrophotometric determination of beryllium in aluminum by means of sulfosalicylate complex / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1950), by H. V. Meek, Charles V. Banks, Iowa State College, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Some observations on loss of static strength due to fatigue cracks / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Walter Illg, Herbert F. Hardrath, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Preliminary investigation of the failure of pressurized stiffened cylinders / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Norris F. Dow, Roger W. Peters, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Torsion, compression, and bending tests of tubular sections machines from 75S-T6 rolled round rod / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by R. L. Moore, J. W. Clark, Aluminum Company of America, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
• The Lateral stability of equal-flanged aluminum-alloy I-beams subjected to pure bending / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1940), by C. Dumont, H. N. Hill, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by E. L. Aul, G. Sachs, A. W. Dana, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Elevated-temperature compressive stress-strain data for 24S-T3 aluminum-alloy sheet and comparisons with extruded 75S-T6 aluminum alloy / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by William M. Roberts and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A structural-efficiency evaluation of titanium at normal and elevated temperatures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by George J. Heimerl, Paul F. Barrett, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• An Investigation of pure bending in the plastic range when loads are not parallel to a principal plane / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by Harry A. Williams and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Exposure tests of galvanized-steel-stitched aluminum alloys / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by Fred M. Reinhart and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Axial-load fatigue properties of 24S-T and 75S-T aluminum alloy as determined in several laboratories / (Washington, D.C. : National Advisory Committee for Aeronautics, 1953), by Charles B. Landers, Paul Kuhn, W. S. Hyler, H. J. Grover, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Alloys of aluminum, thorium and uranium / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1956), by Gene E. Bobeck, Harley A. Wilhelm, Ames Laboratory, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Experimental and theoretical determination of thermal stresses in a flat plate / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Richard R. Heldenfels, William M. Roberts, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Dissolving highly irradiated Pu - Al alloy / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1964), by William C. Perkins, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Mechanical properties of irradiated zirconium, zircaloy, and aluminum : a summary of the data in the literature / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1961]), by Richard E. Schreiber, Erminia U. Kauer, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Dissolution of Pu-Al alloy / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1962]), by William C. Perkins, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Recovery of plutonium from irradiated plutonium-aluminum alloy / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1962), by William C. Perkins, Hugh E. Henry, William J. Jenkins, Myron R. Caverly, Carl S. Schlea, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Reactivity comparisons between cobalt and lithium-aluminum alloy / ([Washington, D.C.?] : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1957]), by Harold R. Fike, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Diffusion kinetics studies in the Al-Ni-U system /, by R. A. Harlow, Otto Gamba, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Increasing the compressive strength of 24S-T aluminum-alloy sheet by flexure rolling / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1946), by George J. Heimerl, Walter Woods, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of the creep lifetime of 75S-T6 aluminum-alloy columns / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Eldon E. Mathauser, William A. Brooks, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of plastic deformation on subsequent decomposition in aluminum alloys /, by Nikola©Œi Nikolaevich Bu©Œinov, L. I. Podrezov, U.S. Atomic Energy Commission, and National Science Foundation (U.S.) (page images at HathiTrust)
• Causes of the effect of small dissolved admixtures on the kinetics of the aging of alloys /, by V. I. Arkharov, N. N. Skornyakov, B. N. Varskoi, U.S. Atomic Energy Commission, and National Science Foundation (U.S.) (page images at HathiTrust)
• Premium-quality aluminum castings /, by K. R. Grube, H. R. Ogden, D. N. Williams, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Stress-corrosion cracking of aluminum alloys /, by F. H. Haynie, Walter K. Boyd, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Welding of aluminum and aluminum alloys /, by R. P Meister, D. C. Martin, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Weldability of high-strength aluminum alloys /, by R. M. Evans, D. J. Maykuth, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Stress-corrosion cracking of aluminum alloys : a review of the German literature /, by F. R. Mertens and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Room temperature tensile properties of large 7075-T6 and 7075-T73 aluminum-alloy forgings /, by D. P Moon, W. S. Hyler, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Quarterly technical progress report : fuels, materials, and coolant chemistry programs, January-March 1970 /, by Rockwell International. Atomics International Division and U.S. Atomic Energy Commission (page images at HathiTrust)
• Casting aluminum. ([Louisville, Ky., 1956]), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Investigation of stress-strain history modeling at stress risers : Phase 2 /, by James R. Carroll, R. F. Wilkinson, R. L. Brugh, sponsor Air Force Flight Dynamics Laboratory (U.S.), and sponsor Lockheed-Georgia Company (page images at HathiTrust)
• Extended study of flaw growth at fastener holes. (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978), by T. M. Hsu, W. M. McGee, sponsor Air Force Flight Dynamics Laboratory (U.S.), issuing body United States. Air Force. Systems Command, and sponsor Lockheed-Georgia Company (page images at HathiTrust)
• The statistical nature of fatigue crack propagation /, by D. A. Virkler, P. K. Goel, B. M. Hillberry, issuing body United States. Air Force. Systems Command, sponsor Air Force Flight Dynamics Laboratory (U.S.), and sponsor Purdue University. School of Mechanical Engineering (page images at HathiTrust)
• Fracture mechanics of tiny cracks near fasteners /, by William E. Anderson, sponsor Battelle Memorial Institute. Columbus Laboratories, and issuing body United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Extended study of flaw growth at fastener holes., by T. M. Hsu, J. A. Aberson, W. M. McGee, sponsor Air Force Flight Dynamics Laboratory (U.S.), issuing body United States. Air Force. Systems Command, and sponsor Lockheed-Georgia Company (page images at HathiTrust)
• Design and purchase expectations for fracture Resistance of 7000-series aluminum airframe alloys /, by William E. Anderson, sponsor Battelle Memorial Institute. Columbus Laboratories, and issuing body United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Summary of landing gear initial flaws /, by W. T. Fujimoto, J. P. Gallagher, issuing body United States. Air Force. Systems Command, sponsor Air Force Flight Dynamics Laboratory (U.S.), and sponsor McDonnell Douglas Corporation (page images at HathiTrust)
• High alloy content cermets containing titanium diboride as the minor constituent /, by Tracy A. Willmore, Dwight D. Bennett, sponsor United States. Air Force. Air Research and Development Command, and Wright Air Development Center issuing body (page images at HathiTrust)
• An Investigation of sheet-stiffener panels subjected to compression loads with particular reference to torsionally weak stiffeners / (Washington D.C. : National Advisory Committee for Aeronautics, 1940), by Louis Dunn and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Creep collapse of long cylindrical shells under high temperature and external pressure /, by U Thein Wah, R. K. Gregory, sponsor Southwest Research Institute, sponsor Aerospace Research Laboratories (U.S.), sponsor United States. Wright Air Development Division, and United States. Air Force. Air Research and Development Command. issuing body (page images at HathiTrust)
• Kaiser aluminum sheet and plate product information. (Oakland, Calif., 1953), by inc Kaiser Aluminum and Chemical Sales (page images at HathiTrust)
• Strain measurements and strength tests of 25-inch diagonal-tension beams with single uprights / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by James P. Peterson, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Shear-lag tests of a box beam with a highly cambered cover in tension / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by James P. Peterson, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tests of 10 inch 24S-T aluminum-alloy shear panels with 1-1/2 inch holes. 2 - Panels having holes with notched edges / (Washington, D.C. : National Advisory Committee for Aeronautics, [1944]), by Paul Kuhn, L. Ross Levin, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Test data on the shear strength of joints assembled with round-head and brazier-head rivets / (Washington, D.C. : National Advisory Committee for Aeronautics, [1943]), by Merven W. Mandel, Evan H. Schuette, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The shearing rigidity of curved panels under compression / (Washington, D.C. : National Advisory Committee for Aeronautics, 1946), by Nicholas J. Hoff, Bruno A. Boley, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Forming Alcoa aluminum., by Aluminum Company of America (page images at HathiTrust; US access only)
• Preliminary investigation of the compressive strength and creep lifetime of 2024-T3 (formerly 24S-T3) aluminum-alloy plates at elevated temperatures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Eldon E. Mathauser, William D. Deveikis, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Structural aluminum handbook. (Pittsburgh, Pa., Aluminum company of America, 1938), by Aluminum Company of America (page images at HathiTrust; US access only)
• Stress-corrosion cracking in high strength steels and in titanium and aluminum alloys / (Washington, Naval Research Laboratory; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1972), by B. F. Brown and United States. Office of Naval Research (page images at HathiTrust)
• The electron metallography of some aluminum alloys / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1957), by F. D. Leipziger, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Preparation of thorium-aluminum alloys by direct thoria reduction / (Canoga Park, California : Atomics International, [1960]), by D. O. Raleigh, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fabrication development of APM alloys for fuel elements / (Canoga Park, California : Atomics International, [1961]), by E. G. Kendall, B. Gradle, B. N. Briggs, M. H. Binstock, W. H. Friske, G. V. Alm, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Static corrosion of aluminum alloys at 350°F and 480°F in distilled water / (Livermore, CA: Livermore Research Laboratory, 1953), by P. O. Strom, M. H. Boyer, Lawrence Livermore Laboratory, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The effect of neutron flux on the mechanical properties of aluminum alloys / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service ; [Washington, D.C.] : [Available from the Office of Technical Services, Dept. of Commerce], 1954), by R. V. Steele, W. P. Wallace, Lawrence Livermore Laboratory, U.S. Atomic Energy Commission, and California Research and Development Company (page images at HathiTrust)
• Design considerations in the use of 5000 series aluminum alloys / (Albuquerque, N.M. : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Dept. of Commerce, [1961]), by C. H. Maak and Sandia Corporation (page images at HathiTrust)
• Elevated temperature properties of 2024-T3 aluminum alloy / ([Albuquerque, N.M.] : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, [1958]), by D. R. Adolphson and Sandia Corporation (page images at HathiTrust)
• Elevated temperature properties of 7075-T6 aluminum alloy / ([Albuquerque, N.M.] : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, [1958]), by D. R. Adolphson and Sandia Corporation (page images at HathiTrust)
• Elevated temperature properties of 2014-T6 aluminum alloy / ([Albuquerque, N.M.] : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, [1958]), by D. R. Adolphson and Sandia Corporation (page images at HathiTrust)
• Results of high-temperature strain-fatigue tests on reactor-grade aluminum-base materials / (Canoga Park, California : Atomics International, [1961]), by W. F. Anderson, W. Wahl, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Investigation of the corrosion aspects of selected aluminum alloys : final report /, by Karlis Riskevics, Northern States Power Company (Wisconsin), Pathfinder Atomic Power Plant, and Allis-Chalmers Manufacturing Company (page images at HathiTrust)
• The equilibrium phases in the uranium-aluminum-iron alloys in the partial domain uranium-UAl2-UFe2 /, by G©·unter Petzow, Raghav Tank, U.S. Atomic Energy Commission, and Mo.). Uranium Division Mallinckrodt Chemical Works (Saint Louis (page images at HathiTrust)
• A review of some electron-microscopic fractographic studies of aluminum alloys /, by W. R. Warke and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Stress-corrosion cracking of aluminum alloys /, by J. D Jackson, Walter K. Boyd, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A study of the influence of geometry on the strength of fatigue cracked panels /, by E. K. Walker, sponsor Northrop Corporation, and sponsor Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Metallography of dispersion hardened alloys and its relation to creep resistance /, by I. S. Brammar, D. W. Dawe, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, and sponsor Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Investigation of the distribution of tension in notched construction elements /, by H. Neuber, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States. issuing agency, and sponsor Technische Hochschule München (page images at HathiTrust)
• Fracture control procedures for aircraft structural integrity /, by Howard A. Wood and issuing agency Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• A tramp-metal detector / ([Aiken, S.C.] : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1955]), by M. H. Goosey, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust; US access only)
• The effect of size and stress history on fatigue crack initiation and propagation /, by Waloddi Weibull and sponsor United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials Processes (page images at HathiTrust)
• Influence of residual stresses on random fatigue life, in bending, of notched 7075 Aluminum specimens /, by R. A. Heller, A. M. Freudenthal, M. Seki, sponsor United States. Air Force. Systems Command. Aeronautical Systems Division, and sponsor Columbia University. Department of Civil Engineering and Engineering Mechanics (page images at HathiTrust)
• Aging study of 2024 aluminum by dynamic modulus techniques /, by G. W. King and sponsor United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes (page images at HathiTrust)
• Alcoa aluminum and its alloys. (Pittsburgh, Pa., Aluminum Company of America, [1938]), by Aluminum Company of America (page images at HathiTrust)
• Reports of the Light Alloys Sub-committee. (London, H. M. Stationery Off., 1921), by Great Britain Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Structural evaluation of superplastic sluminum., by Hadassah C. Lipsius, Alvin Shames, Julius Stock, issuing body Air Force Wright Aeronautical Laboratories, and sponsor Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Development of a mathematical model for predicting the percentage fatigue life increase resulting from shot peened components., by Roger S. Simpson, issuing body Air Force Wright Aeronautical Laboratories, and sponsor Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• The effects of slip character and crack closure on the growth of small fatigue cracks in titanium-aluminium alloys /, by James M. Larsen, sponsor Wright Research Development Center, sponsor Air Force Flight Dynamics Laboratory (U.S.), and issuing body United States. Air Force. Systems Command (page images at HathiTrust)

More items available under narrower terms.