The Online Books Page

Axial loads

See also what's at your library, or elsewhere.

• Strains and stresses

• Axial loads -- Mathematical models

• Loads, Axial

• Principal effects of axial load on moment-distribution analysis of rigid structures (National Advisory Committee for Aeronautics, 1935), by Benjamin Wylie James and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Behavior of plain concrete under various high triaxial compression loading conditions (Air Force Weapons Laboratory, 1965), by James Chinn, Roger M. Zimmerman, and Air Force Weapons Laboratory (page images at HathiTrust)
• Buckling and vibration analysis of a simply supported column with a piecewise constant cross section (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by Mark S. Lake, Martin M. Mikulas, and Langley Research Center (page images at HathiTrust)
• Analysis and testing of axial compression in imperfect slender truss struts (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Mark S. Lake, Nicholas Georgiadis, and Langley Research Center (page images at HathiTrust)
• Load interaction effects on fatigue crack growth in Ti-6Al-4V alloy (National Aeronautics and Space Administration ;, 1973), by Robert Peh-ying Wei, J. H. FitzGerald, T. T. Shih, Langley Research Center, and Lehigh University (page images at HathiTrust)
• NASA TN D-2005 (National Aeronautics and Space Administration, 1963), by Charles D. Babcock, E. E. Sechler, California Institute of Technology, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Effect of axial load on mode shapes and frequencies of beams (National Aeronautics and Space Administration ;, 1975), by Francis J. Shaker and Lewis Research Center (page images at HathiTrust)
• Simplified method for calculating thermal conductance of rough, nominally flat surfaces in high vacuum (National Aeronautics and Space Administration ;, 1970), by Daniel J. McKinzie, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Effects of changing stress amplitude on the rate of fatigue-crack propagation in two aluminum alloys (National Aeronautics and Space Administration, 1961), by C. M. Hudson, Herbert F. Hardrath, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• NASA TN D-6121 (National Aeronautics and Space Administration ;, 1971), by W. Jefferson Stroud, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• The elasto-plastic stability of plates (NACA, 1947), by A. A. Il§i�ushin and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Fatigue testing machine for applying a sequence of loads of two amplitudes (National Advisory Committee for Aeronautics, 1951), by Richard Barksdale Harwell, Ira Smith, Darnley M. Howard, Frank C. Smith, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Axial-load fatigue properties of 24S-T and 75S-T aluminum alloy as determined in several laboratories (National Advisory Committee for Aeronautics, 1953), by Charles B. Landers, Paul Kuhn, W. S. Hyler, H. J. Grover, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strength and stiffness of steel under biaxial loading (1915), by Albert John Becker (page images at HathiTrust; US access only)
• Investigation of the normal-force, axial-force, and pitching-moment characteristics of blunt low-fineness-ratio bodies of revolution at a mach number of 3.55 (National Aeronautics and Space Administration, 1961), by Russell W. McDearmon, Warren A Lawson, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• An experimental study of combined bending and axial load in reinforced concrete members (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1950), by Eivind Hognestad and University of Illinois at Urbana-Champaign. Dept. of Theoretical and Applied Mechanics (page images at HathiTrust)
• Axial loading of a cylindrical container (Schenectady, New York : Knolls Atomic Power Laboratory, 1951., 1951), by D. P. Timo, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Response and failure of composite plates with a bolt-filled hole (Federal Aviation Administration, Office of Aviation Research ;, 1998), by U. M. Yan, Stanford University. Department of Aeronautics and Astronautics, and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
• Effect of fiber orientation on initial postbuckling behavior and imperfection sensitivity of composite cylindrical shells (Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1970), by N. S. Khot, V. B. Venkayya, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• On design of off-axis specimens (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1985., 1985), by Raghbir Singh Sandhu, George Peter Sendeckyj, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Inc Analytical Methods (page images at HathiTrust)
• Studies of design criteria for welded structures subjected to a biaxial stress field (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processess, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Bruce L. Baird and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• An experimental study on multi-wall structures for space vehicles (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Flight Dynamics Laboratory, Air Research and Development Command, U.S. Air Force, 1961., 1961), by D. G. Younger, S. Lampert, Aeronutronic Ford Corporation, Air Force Flight Dynamics Laboratory (U.S.), United States. Wright Air Development Division, and United States. Air Force. Air Research and Development Command (page images at HathiTrust)
• Thermo-structural analysis manual. Volume II (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962., 1962), by Marvin J. Forray, M. Noiman, H. Switzky, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Republic Aviation Corporation (page images at HathiTrust)

• Buckling analysis for axially compressed flat plates, structural sections, and stiffened plates reinforced with laminated composites (National Aeronautics and Space Administration ;, 1971), by A. V. Viswanathan, R. E. Miller, Tsai-Chen Soong, Langley Research Center, and Boeing Company (page images at HathiTrust)
• Elastic buckling analysis for composite stiffened panels and other structures subjected to biaxial inplane loads (National Aeronautics and Space Administration ;, 1973), by A. V. Viswanathan, M. Tamekuni, Langley Research Center, and Boeing Commercial Airplane Company (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Fundamentals of Stress Analysis (second edition; Los Angeles: Aero Publishers, 1960), by Albert Deyarmond and Albert Arslan (page images at HathiTrust)
• A Translation of The Stability of Elastic Equilibrium (uncredited translator; technical report AFFDL-TR-70-25; 1970), by W. T. Koiter (PDF at dtic.mil)
• Mechanical Behavior of Engineering Materials (Englewood Cliffs, NJ: Prentice-Hall, 1962), by Joseph Marin (page images at HathiTrust)
• A.C.S.R. Graphic Method for Sag-Tension Calculations (Pittsburgh: Aluminum Company of America, 1927), by Theodore Varney (page images at HathiTrust)
• Stresses in Aircraft and Shell Structures (New York et al.: McGraw-Hill, 1956), by Paul Kuhn (page images at HathiTrust)
• A Theory for the Effect of Mean Stress on Fatigue of Metals Under Combined Torsion and Axial Load or Bending (1958), by William N. Findley (page images at HathiTrust)
• Torsion Analysis of Rolled Steel Sections (New York: Bethlehem Steel Corp., 1963), by Conrad P. Heins and P. A. Seaburg (page images at HathiTrust)
• Evolution of allowable stresses in shear for lumber (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1979), by Robert L. Ethington and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• The application of quaternions to the analysis of internal stress ... (J. B. Stott, printer, 1901), by Charles Worthington Comstock (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies; being lectures on mathematical physics. (Hafner, 1949), by Arthur Gordon Webster (page images at HathiTrust)
• The dynamics of particles and of rigid elastic (Dover Publications, 1959), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• The dynamics of particles and of rigid, elastic and fluid bodies. Being lectures on mathematical physics (Stechert, 1922), by Arthur Gordon Webster (page images at HathiTrust)
• The dynamics of particles and of rigid elastic, and fluid bodies; being lectures on mathematical physics.. (G.E. Stechert, 1942), by Arthur Gordon Webster (page images at HathiTrust)
• Introduction to the mathematical theory of the stress and strain of elastic solids (Longmans, Green, 1894), by Benjamin Williamson (page images at HathiTrust)
• Théorie de la résistance de la torsion et de la flexion plane des solides... (Mallet-Bachelier [etc.], 1862), by Jean-Baptiste-Charles-Joseph Bélanger (page images at HathiTrust)
• Das Gesetz des Kraftverlaufes beim Stoss; Untersuchungen über die gesetzmässigen Beziehungen beim Stoss elastischer Körper (F. Vieweg und Sohn Akt.-Ges., 1924), by Franz Berger (page images at HathiTrust)
• Moments and shears in a force fitted rectangular plate, general model. ([Santa Monica, Calif.], 1962), by Douglas Aircraft Company. Missile and Space Systems Division and G. Stoffmacher (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. Being lectures on mathematical physics (B.G. Teubner, 1904), by Arthur Gordon Webster (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. : Being lectures on mathematical physics (B. G. Teubner;, 1912), by Arthur Gordon Webster (page images at HathiTrust)
• Principles of experimental stress analysis. (Prentice-Hall, 1954), by Mark B. Moore (page images at HathiTrust)
• Fundamentals of stress analysis (Aero publishers, 1942), by Albert Deyarmond and Albert Arslan (page images at HathiTrust)
• Elementary aircraft structures (Lithoprinted by Edwards brothers, inc.], 1943), by Millard V. Barton (page images at HathiTrust)
• Airplane stress analysis; an introductory treatise (Ronald Press, 1929), by Alexander Klemin and George F. Titterton (page images at HathiTrust)
• Fundamentals of aircraft structures. (Prentice-Hall, 1948), by Millard V. Barton (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with examples and problems. (College of engineering, Cornell university, 1935), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations, with emphasis on the economics of design. (Boulder, Colo., 1947), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations (Boulder, Colo., 1949), by Karl Dawson Wood (page images at HathiTrust)
• Airplane design; a textbook and handbook on airplane and helicopter layout and preliminary design calculations (The author;, 1954), by Karl Dawson Wood (page images at HathiTrust)
• Application of double Fourier series to the calculation of stresses caused by pure bending in a circular monocoque cylinder with a cut-out (The Polish Institute of Arts and Sciences in America, 1946), by Zbigniew Krzywoblocki and Polish Institute of Arts and Sciences in America (page images at HathiTrust)
• Report of the Committee on the mechanical testing of timber ... (H. M. Stationery off. [printed by Harrison and sons, ltd.], 1934), by Great Britain. Dept. of scientific and industrial research. Committee on mechanical testing of timber and J. A. Ewing (page images at HathiTrust)
• Wood structural design data. ([Washington], 1941), by National Lumber Manufacturers Association (page images at HathiTrust)
• Wood structural design data. (Washington, D. C. :, 1956), by National Lumber Manufacturers Association (page images at HathiTrust)
• Timber engineers' handbook. (J. Wiley, 1948), by Howard James Hansen (page images at HathiTrust)
• Douglas fir use book. (West Coast Lumbermen's Association, 1930), by West Coast Lumbermen's Association (page images at HathiTrust)
• Formulas and tables for architects and engineers in calculating the strains and capacity of structures in iron and wood (W. Choate & Co., 1873), by Franz Schumann (page images at HathiTrust)
• The mechanics of engineering (Wiley, 1902), by A. Jay Du Bois (page images at HathiTrust)
• Applied elasticity (Westinghouse technical night school press, 1925), by Stephen Timoshenko and John Moyes Lessells (page images at HathiTrust)
• Résistance des matériauz appliquée aux constructions. Methodes pratiques par le calcul et la statique graphique ... (Vve C. Dunod, 1904), by Ernest Aragon (page images at HathiTrust; US access only)
• Mechanics of materials (McGraw-Hill, 1963), by K. Pete Arges and Aubrey E. Palmer (page images at HathiTrust)
• Mechanical properties of materials and design. (McGraw-Hill, 1942), by Joseph Marin (page images at HathiTrust)
• Der bildsame zustand der werkstoffe (J. Springer, 1927), by Arpád Nádai (page images at HathiTrust; US access only)
• Theory of flow and fracture of solids (McGraw-Hill, 1950), by Arpád Nádai (page images at HathiTrust)
• Resistance of materials, for beginners in engineering (Ginn and company, 1914), by S. E. Slocum (page images at HathiTrust)
• A tentative guide for fatigue testing and the statistical anaylsis of fatigue data. (American Society for Testing Materials, 1958), by American Society for Testing Materials. Committee E-9 on Fatigue (page images at HathiTrust)
• A course in modern timber engineering (Southern pine association, 1942), by Howard James Hansen and Southern Pine Association (page images at HathiTrust)
• Modern timber engineering. (Southern Pine Assn., 1949), by Walter Fleming Scofield, Howard James Hansen, W. H. O'Brien, and Southern Pine Association (page images at HathiTrust)
• Eccentric loads on concrete. (Edwards bros., inc., 1943), by Leonard Thomas Evans (page images at HathiTrust)
• The fatigue of metals. (Scott, Greenwood & son, 1924), by H. J. Gough (page images at HathiTrust; US access only)
• Evaluation of residual stress. (McGraw-Hill Book Co., 1948), by Kalman Heindhofer (page images at HathiTrust)
• Fatigue of metals (The Nitralloy corporation, 1942), by David Landau and New York Nitralloy corporation (page images at HathiTrust)
• Stresses in structural steel angles, with special tables (John Wiley & sons, inc.; [etc., etc.], 1917), by L. A. Waterbury (page images at HathiTrust)
• Piping stress calculations simplified (McGraw-Hill, 1943), by Siegfried Werner Spielvogel (page images at HathiTrust; US access only)
• Piping stress calculations simplified. (Lake Success, N.Y., 1951), by Siegfried Werner Spielvogel (page images at HathiTrust)
• Piping : flexibility and stresses (Cornell Maritime Press, 1941), by Spiros Dionisios Vinieratos and Dominick Raoul Zeno (page images at HathiTrust)
• Arch dam investigation. v. 1-3. ([New York, 1928), by Engineering Foundation (U.S.) Committee on Arch Dam Investigation and American Society of Civil Engineers (page images at HathiTrust)
• Recommended building code requirements for working stresses in building materials. Report of Building code committee. June 1, 1926 ... Bureau of standards. (Govt. print. off., 1926), by United States. Dept. of Commerce. Building Code Committee, Ira H. Woolson, and United States. Dept. of Commerce (page images at HathiTrust)
• Introduction to the theoretical and experimental analysis of stress and strain (McGraw-Hill, 1958), by Augusto J. Durelli (page images at HathiTrust)
• An investigation of the load-deformation characteristics of reinforced concrete beams up to the point of failure (Urbana, 1952), by James Raymond Gasten (page images at HathiTrust)
• Elastic and plastic properties of soils and their influence on the continuous support of rigid pavements (Ohio River Division Laboratories, 1954), by Spencer J. Buchanan, Fuad I. Khuri, and United States Army Corps of Engineers (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs ... (J. Wiley & son, 1873), by De Volson Wood (page images at HathiTrust)
• Structural design in theory and practice. (Constable & company ltd., 1923), by Henry Adams (page images at HathiTrust)
• Structural bending moments simplified; rapid solutions for continuous beams, frames and arched frames, quadrangular structures (Printed by Polygraphic company of America, 1938), by Ulrik Tornoe Berg (page images at HathiTrust)
• The strains in framed structures, with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings. (J. Wiley & sons, 1883), by A. Jay Du Bois (page images at HathiTrust)
• The stresses in framed structures. Including the strength of materials and theory of flexure. (J. Wiley & Sons, 1896), by A. Jay Du Bois (page images at HathiTrust)
• Theory of statically indeterminate structures (McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
• The availability of open web trusses in structural engineering (Urbana, Ill., 1927), by Linton E. Grinter (page images at HathiTrust)
• Elements of structural engineering. (Ronald P., 1954), by Ernest C. Harris (page images at HathiTrust)
• Statically indeterminate frameworks. (University of North Carolina Press, 1937), by Thomas Felix Hickerson (page images at HathiTrust)
• Statically indeterminate frameworks. (University of North Carolina Press, 1949), by Thomas Felix Hickerson (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice. (J. Wiley & sons; [etc., etc.], 1911), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice (J. Wiley & sons ;, 1951), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Structural frameworks (Wiley, 1943), by Clyde T. Morris and Samuel T. Carpenter (page images at HathiTrust)
• Manual of moment design (H. M. Ives & sons, 1941), by Jack Singleton and American Institute of Steel Construction (page images at HathiTrust)
• Elementary theory and design of flexural members (Wiley, 1950), by Jamison Vawter and James G. Clark (page images at HathiTrust)
• Principles of economy in the design of metallic bridges (J. Wiley & sons, 1885), by Charles B. Bender (page images at HathiTrust)
• A treatise on roofs and bridges, with numerous exercises (D. Van Nostrand company, 1898), by Edward A. Bowser (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of civil engineering at the Rensselaer polytechnic institute. (J. Wiley & sons, 1880), by William H. Burr (page images at HathiTrust)
• Mechanics of the girder: a treatise on bridges and roofs, in which the necessary and sufficient weight of the structure is calculated, not assumed ... (J. Wiley and Sons, 1886), by John Davenport Crehore (page images at HathiTrust)
• Mechanics of internal work (or work of deformation) in elastic bodies and systems in equilibrium, including the method of least work (J. Wiley & sons; [etc., etc.], 1910), by Irving P. Church (page images at HathiTrust)
• Stress analysis and design of elementary structures. (J. Wiley, 1948), by James H. Cissel (page images at HathiTrust)
• The theory of strains. A compendium for the calculation and construction of bridges, roofs and cranes, with the application of trigonometrical notes. (Schmidt & Trowe, 1871), by John H. Diedrichs (page images at HathiTrust)
• Analysis of continous frames by graphical distribution of moments (Tooley-Towne corporation], 1943), by Anatol Alexander Eremin (page images at HathiTrust)
• Handbook of rigid frame analysis (Printed by Edwards brothers, 1934), by Leonard Thomas Evans (page images at HathiTrust)
• Compression of rectangular blocks ([New York, 1931), by J. N. Goodier (page images at HathiTrust; US access only)
• Report of the Bridge stress committee. (London, H.M. Stationery Off. [printed by Harrison and Sons, Ltd.] 1928., 1928), by Great Britain. Department of Scientific and Industrial Research. Bridge Stress Committee, Gerald Salmon Gough, Charles E. Inglis, E. B. Moullin, Conrad Gribble, W. E. Dalby, and J. A. Ewing (page images at HathiTrust; US access only)
• Secondary stresses in bridge trusses (J. Wiley & sons; [etc., etc.], 1908), by C. R. Grimm (page images at HathiTrust)
• Stresses in structures and the accompanying deformations. ([Hann & Adair, printers], 1907), by Albert Henry Heller (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges (D. Van Nostrand company, 1905), by Isamu Hiroi (page images at HathiTrust)
• Deflections and statically indeterminate stresses (J. Wiley & sons; [etc., etc.], 1911), by Clarence W. Hudson (page images at HathiTrust)
• An introduction to experimental stress analysis. (Wiley, 1950), by George Hamor Lee (page images at HathiTrust)
• Theorie der rahmenwerke auf neuer grundlage mit anwendungsbeispielen (J. Springer, 1927), by Ludwig Mann (page images at HathiTrust; US access only)
• An elementary treatise on statically indeterminate stresses (J. Wiley & Sons, inc.; [etc., etc.], 1926), by John Ira Parcel and George Alfred Maney (page images at HathiTrust)
• Introduction to plasticity. (Ronald Press Co., 1956), by A. Phillips (page images at HathiTrust)
• Strain energy methods of stress analysis (Longmans, Green and co. ltd., 1928), by Alfred John Sutton Pippard (page images at HathiTrust; US access only)
• Analysis of continuous frames by the method of restraining stiffnesses (Ellison and Russell, 1934), by Earle Brewster Russell (page images at HathiTrust)
• A treatise on the strength of bridges and roofs, with practical applications and examples for the use of engineers and students (D. Van Nostrand, 1873), by Samuel Henry Shreve (page images at HathiTrust)
• A treatise on the strength of bridges and roofs (D. Van Nostrand, 1877), by Samuel Henry Shreve (page images at HathiTrust)
• Elementary stress analysis. (Pitman Pub. Corp., 1949), by Philip Ervin Soneson (page images at HathiTrust)
• Method of converting heavy motor vehicle loads into equivalent design loads on the basis of maximum floor beam reactions (Texas A. & M. College System, Texas Engineering Experiment Station, 1954), by Henson K. Stephenson and Kriss Clonninger (page images at HathiTrust)
• Steel structures, stresses in simple structures. By Leonard Church Urquhart and Charles Edward O'Rourke. (McGraw-Hill, 1926), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust)
• Theory of limit design. (J. Wiley, 1948), by J. A. Van den Broek (page images at HathiTrust)
• Die Kraftfelder in festen elastischen Körpern und ihre praktischen Anwendungen (Verlag von Julius Springer, 1926), by Theophil Wyss (page images at HathiTrust; US access only)
• Curves for calculating beams, channels and reactions; a manual for engineers, architects, designers, draughtsmen, builders and contractors (McGraw publishing company, 1908), by Sidney Diamant (page images at HathiTrust; US access only)
• Simplified formulas and tables for floors, joists and beams; roofs, rafters and purlins (Wiley, 1913), by N. Clifford Ricker (page images at HathiTrust)
• Graphics and structural design (John Wiley & sons, inc.; [etc., etc.], 1915), by Howard Drysdale Hess (page images at HathiTrust; US access only)
• Statics and strength of materials : an intergrated presentation. (Wiley, 1954), by Roland Henry Trathen (page images at HathiTrust)
• The stress analysis of bow girders (H.M. Stationery Off. [Printed by Harrison and sons, ltd.], 1926), by Alfred John Sutton Pippard and F.L. Barrow (page images at HathiTrust; US access only)
• Plate-girder construction... (D. Van Nostrand co., 1893), by Isami Hiroi (page images at HathiTrust)
• Minimum live loads allowable for use in design of buildings. (Govt. print. off., 1925), by United States. Dept. of commerce. Building code committee, Ira H. Woolson, United States. Department of Commerce, and United States. National Bureau of Standards (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings. : Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... (J. Wiley & sons, 1877), by R. G. Hatfield (page images at HathiTrust)
• Stress and strength of manufactured parts (McGraw-Hill, 1950), by Charles Lipson (page images at HathiTrust)
• A manual for the design of piping for flexibility by the use of graphs (The Detroit Edison company, 1934), by Edwin A. Wert, Edge Taylor Cope, and Samuel Smith (page images at HathiTrust)
• Presenting Flex-anal charts; a new and modern treatise for design of piping for flexibility (Blaw-Knox company--Power piping division, 1940), by Edwin A. Wert and Samuel Smith (page images at HathiTrust)
• New departure engineering data : analysis of stresses and deflections. (New departure, division General motors corp., 1946), by General motors sales corporation. New departure division and A. Burton Jones (page images at HathiTrust)
• Die berechnung von fachwerkkranträgern mit biegungsfestem obergurt (R. Oldenbourg, 1928), by Günter Worch (page images at HathiTrust; US access only)
• Research summary; a summary of studies conducted prior to July 1952 and related to the field of ship structures. ([Washington], 1953), by United States. Ship Structure Committee (page images at HathiTrust)
• Die statik im flugzeugbau (R. C. Schmidt & co., 1917), by Johannes Schwengler (page images at HathiTrust)
• Primary stresses in timber roofs. (H. M. Stationery off, 1926), by Alfred John Sutton Pippard and W. H. Glanville (page images at HathiTrust; US access only)
• Working stresses. (Rutgers University Press, 1940), by Joseph Marin (page images at HathiTrust)
• Structural deflections; a literature and state-of-the-art survey (U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1973), by T. V. Galambos (page images at HathiTrust)
• Advanced mechanics of materials (McGraw-Hill Book Company, inc., 1946), by Glenn Murphy (page images at HathiTrust)
• Congrès international des méthodes d'essai des matériaux de construction, tenu à Paris du 9 au 16 juillet 1900...Procès-verbaux (C. Dunod, 1901), by Congrès international des méthodes d'essai des matériaux de construction. Paris, France. Ministère du commerce, and France) Direction générale de l'exploitation Exposition universelle internationale de 1900 (Paris (page images at HathiTrust)
• Notes on the strength of materials and the stability of structures. : Printed for the civil engineering classes in Union College. (Wiseman, Russell, printers & stereotypers, 1870), by W. M. Gillespie (page images at HathiTrust)
• Mechanics of materials. (Irwin-Farnham Pub. Co., 1948), by Glenn Murphy (page images at HathiTrust)
• The place of photoelasticity in engineering instruction, (Pittsburgh, Pa., 1937), by Max Mark Frocht, Carnegie Institute of Technology, and United States. Works Progress Administration of Pennsylvania (page images at HathiTrust)
• Professor Coker's photo-elastic apparatus for determining the distribution of stress in structural and machine members. (London, 1928), by Adam Hilger Ltd (page images at HathiTrust)
• Dynamic response of materials to intense impulsive loading. (Air Force Materials Laboratory, 1973), by Pei Chi Chou and Alan K. Hopkins (page images at HathiTrust)
• Modern timber engineering (Southern Pine Association, 1954), by Walter Fleming Scofield, Thomas E. Brussell, and W. H. O'Brien (page images at HathiTrust)
• On fatigue phenomena : with special reference to single crystals (Printed by F.J. Parsons, ltd., 1928), by H. J. Gough (page images at HathiTrust)
• The effects of temperature on metals under stress ... ([n. p., 1923), by William Francis Marande (page images at HathiTrust)
• Die strenge berechnung von kreisplatten unter einzellasten mit hilfe von krummlinigen koordinaten und deren anwendung auf die pilzdecke (J. Springer, 1928), by Wilhelm Flügge (page images at HathiTrust; US access only)
• Der Spannungszustand in rechteckigen Platten. (R. Oldenbourg, 1913), by Heinrich Hencky (page images at HathiTrust; US access only)
• Die biegung kreissymmetrischer platten von veränderlicher dicke (J. Springer, 1928), by Otto Pichler (page images at HathiTrust; US access only)
• Wood structural design data. ([Washington], 1943), by National Lumber Manufacturers Association (page images at HathiTrust)
• Über die festigkeit veränderlich elastischer konstruktionen, insbesondere von eisenbetonbauten. Ein beitrag zur erforschung der inneren kräfte und deformationen sowie zum gebrauch bei der berechnung und ausführung armierter betonbalken, -stützen und - gewölbe. (Baumgärtner's buchhandlung, 1904), by Rudolf Saliger (page images at HathiTrust)
• Strains in ironwork. A course of eight elementary lectures delivered before the Society of engineers, in their hall, session 1882-3. (E. & F. N. Spon, 1884), by Henry Adams (page images at HathiTrust)
• Statische berechnung der pfahl-systeme mit den daraus folgenden grundsätzen für deren zweckmässige anordnung (K. Wittwer, 1927), by Hermann Wünsch (page images at HathiTrust; US access only)
• Applied mechanics. (Printed and published at the Thomason college press, 1877), by Allan Joseph Champneys Cunningham (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (J. Wiley & sons; [etc., etc.], 1896), by Mansfield Merriman (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (J. Wiley & sons; [etc., etc.], 1899), by Mansfield Merriman (page images at HathiTrust)
• Die deformationsmethode (Berlin, Julius Springer, 1926), by A. Ostenfeld (page images at HathiTrust; US access only)
• Theory and practice in designing (Constable & company ltd., 1911), by Henry Adams (page images at HathiTrust)
• A treatise on bracing with its application to bridges (A. & C. Black [etc., etc.], 1851), by Robert H. Bow (page images at HathiTrust)
• Théorie de l'équilibre des systèms élastiques et ses applications (A. F. Negro, 1879), by Alberto Catigliano (page images at HathiTrust)
• Drang und zwang; eine höhere festigkeitslehre für ingenieure (R. Oldenbourg, 1920), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust)
• The theory and practice of modern framed structures : Designed for the use of schools, and for engineers in professional practice (J. Wiley & sons; [etc., etc.], 1905), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Framed structures and girders, theory and practice. Volume I. Stresses, part I. (McGraw-Hill book company, 1911), by Edgar Marburg (page images at HathiTrust)
• The theory of structures (E. Arnold, 1909), by Richard John Woods (page images at HathiTrust)
• Strength of beams under transverse loads (D. Van Nostrand, 1875), by William Allan (page images at HathiTrust)
• Moving loads on railway underbridges, including: diagrams of bending moments and shearing forces and tables of equivalent uniform live loads (Whittaker & co., 1907), by Harry Bamford (page images at HathiTrust)
• Live-load stresses in railway bridges, with formulas and tables (John Wiley & Sons, Inc.; [etc., etc.], 1916), by George E. Beggs (page images at HathiTrust)
• The calculations for steel-frame structures, designed to comply with the requirements of the London County council (General powers) act, 1909, with notes on the application of theory to practical design (Scott, Greenwood and son;, 1925), by Walter Cyril Cocking (page images at HathiTrust)
• Beitrag zur untersuchung ebener fachwerke mit steifen knotenpunktsverbindungen ... (R. Noske, 1928), by Konrad Havemann (page images at HathiTrust)
• Beitrag zur berechnung statisch unbestimmter fachwerke (J. Springer, 1928), by Heinrich Heimann (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges (D. Van Nostrand Co., 1915), by Isamu Hiroi (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures, and their strength; consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. etc. (C. Lockwood & son, 1891), by William Humber (page images at HathiTrust)
• Secondary stresses in bridge trusses, introducing the graphic method of deformation contour and its analytic solution with scientific arrangement of computations ... (Carnegie Institute of Technology, 1919), by Thomson Eason Mao (page images at HathiTrust)
• Structural mechanics. A handbook for engineers, architects, and students. (G. Bell & sons [etc.], 1890), by Richard Marion Parkinson (page images at HathiTrust)
• The strains in trusses computed by means of diagrams: with twenty examples drawn to scale. (Appleton, 1872), by Francis A. Ranken (page images at HathiTrust)
• Investigation of the buckling of columns by the photoelastic method of stress analysis (University Park, N.M., 1961), by Samuel H Smith and Don A. Linger (page images at HathiTrust)
• Biegung, schub und scherung in stäben von zusammengesetzten und mehrteiligen querschnittsformen mit gleichen und wechselnden trägheitsmomenten auf grund der zerlegung in ihre einzelteile mit rechnerischen untersuchungen an beispielen und zeichnerischen darstellungen. (W. Ernst & sohn, 1909), by Richard Sonntag (page images at HathiTrust)
• The traverse method in stress analysis. ([Los Angeles, 1948), by Ralph William Stewart (page images at HathiTrust)
• The determination of the safe working stress for railway bridges of wrought iron and steel ... ([Calcutta?, 1899), by E Herbert Stone (page images at HathiTrust)
• Strength and elasticity of structural members (E. Arnold, 1903), by Richard John Woods (page images at HathiTrust)
• Strength and elasticity of structural members (E. Arnold, 1906), by Richard John Woods (page images at HathiTrust)
• Simple practical methods of calculating strains on girders, arches, and trusses; with a supplementary essay on economy in suspension bridges. (Macmillan and Co., 1873), by E. W. Young (page images at HathiTrust)
• Introduzione nel calcolo dei sistemi iperstatici: il portale. (Hoepli, 1925), by Eugenio Kálmán (page images at HathiTrust)
• Mehrstielige rahmen; gebrauchsfertige formeln zur berechnung mehrfach statisch unbestimmter rahmenartiger stabsysteme, als hilfsmittel für den entwerfenden ingenieur und für den konstruktionstisch (W. Ernst & sohn, 1927), by Adolf Kleinlogel (page images at HathiTrust)
• Rahmenformeln; gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus eisen- oder eisenbetonkonstruktion nebst anhang mit sonderfällen teilweise und ganz eingespannter sowie durchlaufender träger (W. Ernst & sohn, 1925), by Adolf Kleinlogel (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations (J. Wiley & sons;, 1905), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• Statique graphique élémentaire et notions préliminaires de résistance des matériaux, à l'usage des élèves architectes, ingénieurs, etc., suivies des tables des poutres & poutrelles en bois et en fer, classées par ordre numérique de modules de section I/v (Girardot & cie, 1925), by M. Darras (page images at HathiTrust)
• Graphic and analytic statics in their practical application to the treatment of stresses in roofs, solid girders, lattice, bowstring and suspension bridges, braced iron arches and piers, and other frameworks. (Crosby Lockwood and co., 1887), by Robert H. Graham (page images at HathiTrust)
• New formulas for the loads and deflections of solid beams and girders. (E. & F.N. Spon, 1872), by William Donaldson (page images at HathiTrust)
• Theorie der Maximalmomente einfacher Träger bei concentrirter Verkehrslast (V. von Zabern, 1883), by J. B. Goebel (page images at HathiTrust)
• Experiments on the flexure of beams, discovery of new laws (D. Van Nostrand Co., 1903), by Albert E. Guy (page images at HathiTrust)
• Die Ermittlung der Nebenspannungen eiserner Fachwerkbrücken : und das praktische Rechnungsverfahren nach Mohr (W. Ernst, 1910), by W. Gehler and Julius Karig (page images at HathiTrust)
• Statische untersuchung der aus ebenen tragflächen zusammengesetzten räumlichen tragwerke. (Druck von gebr. Leemann & co., 1920), by Hermann Schwyzer (page images at HathiTrust)
• The theory of strains in girders and similar structures, with observations on the application of theory to practice, and tables of the strength and other properties of materials. (Longmans, Green and co., 1869), by Bindon B. Stoney (page images at HathiTrust)
• The theory of stresses in girders and similar structures, with practical observations on the strength and other properties of materials. (Longmans, Green, and co., 1886), by Bindon B. Stoney (page images at HathiTrust)
• Architectural mechanics; statics and strength of materials. Notes for Arch. 49 and 50, College of Architecture and Design, University of Michigan. ([Lithoprinted by Edwards Brothers], 1954), by Walter Van Cleve Marshall (page images at HathiTrust)
• Continuity in concrete building frames. (Portland cement association, 1937), by Portland Cement Association (page images at HathiTrust)
• Continuity in concrete building frames; practical analysis for vertical load and wind pressure. (Portland cement association, 1942), by Portland Cement Association (page images at HathiTrust)
• Design, construction and testing of a plywood hyperbolic paraboloid lattice structure (University of Kansas, 1958), by Willard Strode and Donald Lee Dean (page images at HathiTrust)
• Applications of stress analysis (University of Michigan, 1959), by Charles Lipson and D. H. Thiel (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations (D. Appleton and company, 1856), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (D. Appleton and company, 1883), by Herman Haupt (page images at HathiTrust)
• Theory of notch stresses; principles for exact stress calculation. (J.W. Edwards, 1946), by Heinz Neuber, J. S. Brock, and Fritjof Andersen Raven (page images at HathiTrust; US access only)
• Rayleigh's principle and its applications to engineering; the theory and practice of the energy method for the approximate determination of critical loads and speeds (Dover Publications, 1956), by G. Temple and W. G. Bickley (page images at HathiTrust)
• The design of flexible surfaces ([Ann Arbor, Mich., 1937), by William Stuart Housel (page images at HathiTrust)
• Moments and stresses in slabs (National research council, 1921), by Harold Malcolm Westergaard and Willis Appleford Slater (page images at HathiTrust)
• Experimental determination of eccentricity of floor loads applied to a bearing wall (U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1968), by D. Watstein and Paul Victor Johnson (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses; arched ribs and suspension bridges (Wiley, 1886), by William H. Burr (page images at HathiTrust)
• Mechanical behavior of sea ice (US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1983), by Malcolm Mellor and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : final report, July, 1978-June 1980 (The Commission :, 1981), by C. S. Hartley, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Accident Evaluation, and University of Florida. Department of Materials Science and Engineering (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : progress report, July 1, 1977 - June 30, 1978 (U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research ;, 1978), by C. S. Hartley, University of Florida. Department of Materials Science and Engineering, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Analytical and experimental studies of a beam with a geometric nonlinearity (Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission ; available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ;, 1980), by Y. A. Mariamy, J. C. Anderson, S. F. Masri, and University of Southern California. Department of Civil Engineering (page images at HathiTrust)
• Static and dynamic J-R curve testing of A533B steel using the key curve analysis technique (The Commission, 1981), by J. A. Joyce, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, and United States Naval Academy (page images at HathiTrust)
• The fracture of metals (American Welding Society, 1947), by Maxwell Gensamer and United States Navy Department Bureau of Ships (page images at HathiTrust)
• Design of beams and columns (International Textbook Co., 1930), by International Correspondence Schools (page images at HathiTrust)
• Modern timber engineering (Southern Pine Association, 1963), by W. Fleming Scofield, William A. Oliver, and W. H. O'Brien (page images at HathiTrust)
• Translation key to Kleinlogel's Rahmenformeln (Frederick Ungar Publishing Co., 1945), by Adolf Kleinlogel and F. S. Morgenroth (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies ; being lectures on mathematical physics (B. G. Teubner, 1925), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• Some elementary principles of shell stress analysis with notes on the use of the shear center (National Advisory Committee for Aeronautics, 1939), by Paul Kuhn and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A semi-graphical method for analyzing strains measured on three or four gage lines intersecting at 45 degrees (National Advisory Committee for Aeronautics, 1939), by H. N. Hill and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Bending stresses due to torsion in cantilever box beams (National Advisory Committee for Aeronautics, 1935), by Paul Kuhn and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• The strength of shell bodies - theory and practice (National Advisory Commitee for Aeronautics, 1937), by H. Ebner and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• Rectangular shell plating under uniformly distributed hydrostatic pressure (National Advisory Commitee for Aeronautics, 1940), by M. Neubert, A. Sommer, and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• Leçons de mécanique pratique : à l'usage des auditeurs des cours du conservatoire des arts et métiers, et des sous-officiers et ouvriers d'artillerie (Libraire Scientifique - Industrielle de L. Mathias (Augustin), 1846), by M. Morin (page images at HathiTrust)
• Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgewise bending and compression (1956), by William R. Kimel (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (J. Wiley & sons;, 1895), by Mansfield Merriman (page images at HathiTrust)
• A practical treatise on the strength of material: including their elasticity and resistance to impact. (E. & F.N. Spon, 1893), by Thomas Box (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses : arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute (J. Wiley & Sons, 1889), by William H. Burr (page images at HathiTrust)
• Die Festigkeitslehre. Elementares Lehrbuch. (Bergsträsser, 1902), by R. Lauenstein (page images at HathiTrust)
• Der Torsionsindikator (M. Krayn, 1912), by Paul Nettmann (page images at HathiTrust)
• Materials and constructions, a text-book of elementary structural design (P. Blakiston's Son & Co., 1912), by James Alfred Pratt (page images at HathiTrust)
• Berechnung ebener, rechteckiger Platten mittels trigonometrischer Reihen. (R. Oldenbourg, 1911), by Karl Hager (page images at HathiTrust; US access only)
• Graphics and structural design (John Wiley & sons, inc.; [etc., etc.], 1913), by Howard Drysdale Hess (page images at HathiTrust)
• Referance book for statical calculations. (Rapid statics.) Force-diagrams for frameworks, tables, instructions for statical calculations etc. for all classes of building and engineering. Published for the practical use of boards of works, architects and engineers (E. & F.N. Spon, ltd;, 1905), by Francis Ruff (page images at HathiTrust; US access only)
• Stresses in masonry (C. Griffin & company, limited, 1909), by Herbert Chatley (page images at HathiTrust; US access only)
• Mechanics of materials; a treatise on the elasticity and strength of beams, columns, arches, etc., for students of engineering. (J. Wiley & sons, 1887), by Irving P. Church (page images at HathiTrust)
• Drang und zwang : eine höhere festigkeitslehre für ingenieure (R. Oldenbourg, 1924), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust; US access only)
• Translation key to Kleinlogel's Mehrstieligs Raluneo (Multi-column frames) v. 1 and 2. (F. Ungar Pub. Co., 1948), by Fred Blum and Adolf Kleinlogel (page images at HathiTrust)
• The strength of materials; a treatise on the theory of stress calculations for engineers (Longmans, Green & co.;, 1925), by John Case (page images at HathiTrust; US access only)
• Allowable loads on eccentrically loaded concrete columns (Morris, 1947), by I. E. Morris (page images at HathiTrust)
• Strength of materials; a first course (Ronald Press, 1938), by Norman C. Riggs and Max Mark Frocht (page images at HathiTrust)
• The strength of structural elements; a textbook for students, engineers and architects (Scott, Greenwood, 1917), by Ernest H. Sprague (page images at HathiTrust)
• A course in modern timber engineering; the use of lumber as an engineering material (Southern pine association, 1946), by Howard James Hansen, Walter Fleming Scofield, and Southern Pine Association (page images at HathiTrust)
• Die Berechnung von Steifrahmen nebst anderen statisch unbestimmten Systemen. (Julius Springer, 1909), by Ejnar Björnstad (page images at HathiTrust)
• Economics of construction in relation to framed structures (E. & F. N. Spon; [etc., etc.], 1873), by Robert H. Bow (page images at HathiTrust)
• Elastic stresses in structures. (Scott, Greenwood, 1919), by Alberto Castigliano and Ewart S. Andrews (page images at HathiTrust)
• Maximum stresses under concentrated loads, treated graphically. (D. Van Nostrand Company, 1890), by Henry T. Eddy (page images at HathiTrust)
• Graphics for engineers, architects and builders : a manual for designers, and a text-book for technical schools (John Wiley and Sons, 1890), by Charles E. Greene (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice, furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations (D. Appleton, 1869), by Herman Haupt (page images at HathiTrust)
• Stresses in structures and the accompanying deformations (Hann & Adair, 1905), by A. H. Heller (page images at HathiTrust)
• Stresses in structures (John Wiley & sons, inc.; [etc., etc.], 1916), by Albert Henry Heller and Clyde T. Morris (page images at HathiTrust)
• Structural frameworks; a new method of analysis, with tables (The University of North Carolina Press, 1934), by Thomas Felix Hickerson (page images at HathiTrust)
• Analytische ermittelung und anwendung von einflusslinien : einiger im eisenbetonbau häufig vorkommender statisch unbestimmter träger (Ernst & Sohn, 1908), by Arthur Lederer and Rud Wolle (page images at HathiTrust)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials. (D. Van Nostrand, 1873), by Bindon B. Stoney (page images at HathiTrust)
• Über die berechnung statisch ungestimmter auslegerbrücken. (Ernst & Sohn, 1898), by Heinrich F. B. Müller-Breslau (page images at HathiTrust)
• Stresses in simple structures (McGraw-Hill Book Company, inc., 1932), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... (J. Wiley & Sons, 1891), by Jakob Johann Weyrauch, Robert Henry Thurston, and A. Jay Du Bois (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs. (J. Wiley & Sons, 1876), by De Volson Wood (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and stress analysis calculations, with particular emphasis on economics of design. (The author;, 1941), by Karl Dawson Wood (page images at HathiTrust)
• Stau bei Flussbrücken : begründung einer neuen Stauformel (Konrad Wittwer, 1913), by A. Hofmann (page images at HathiTrust; US access only)
• Design of piping systems; expansion stresses and reactions in piping systems. (The M.W. Kellog Company, 1941), by M.W. Kellogg Company (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice (Wiley, 1914), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Stresses in framed structures (McGraw-Hill Book Company, inc., 1923), by George Albert Hool and W. S. Kinne (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice. (J. Wiley & sons, 1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Modern framed structures (Wiley & Sons ;, 1903), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Modern framed structures (Wiley & Sons ;, 1926), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures ; designed for the use of schools and for engineers in professional practice (J. Wiley, 1929), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
• Stresses in framed structures (McGraw-Hill Book Company, inc., 1942), by George Albert Hool, George Campbell Ernst, Roy Richard Zipprodt, and W. S. Kinne (page images at HathiTrust; US access only)
• Analysis of stresses, proportioning the material, details of construction, details, bills, and estimates, streets and highways, paving. (International Textbook Co., 1903) (page images at HathiTrust)
• An elementary treatise on statically indeterminate stresses (J. Wiley & Sons, inc.;, 1936), by John Ira Parcel and George Alfred Maney (page images at HathiTrust; US access only)
• Stress distribution around resin-grouted bolts (U.S. Dept. of the Interior, Bureau of Mines, 1980), by Daryl E. Radcliffe and Raymond E. Stateham (page images at HathiTrust)
• Distribution of stress in the Westvaco Trona Mine, Westvaco, Wyo. (U.S. Dept. of the Interior, Bureau of Mines, 1965), by Thomas A. Morgan, William J. Sturgis, and W. G. Fischer (page images at HathiTrust)
• A method for the prediction of stresses in an isotropic inclusion or orebody of irregular shape (U.S. Dept. of Interior, Bureau of Mines, 1972), by Martin S. Oudenhoven, Wilson Blake, Clarence O. Babcock, and United States Bureau of Mines (page images at HathiTrust)
• A new method of analysis to obtain exact solutions for stresses and strains in circular inclusions (U.S. Bureau of Mines, 1974), by Clarence O. Babcock (page images at HathiTrust)
• Photoelastic study of an internally stressed circular opening in a biaxial stress field (U.S. Dept. of the Interior, Bureau of Mines, 1966), by Martin S. Oudenhoven, George T. Krempasky, and United States Bureau of Mines (page images at HathiTrust)
• Stresses in rock outcrops near Atlanta, Ga. (U.S. Dept. of the Interior, Bureau of Mines, 1966), by Verne E. Hooker, Wilbur I. Duvall, and United States Bureau of Mines (page images at HathiTrust)
• Traverse method for analyzing continuous structures (Stewart, 1948), by Ralph William Stewart (page images at HathiTrust)
• Stresses and displacements induced in rock by tunnel boring machine props (U.S. Dept. of the Interior, Bureau of Mines, 1968), by Wilbur I. Duvall, Wilson Blake, and United States Bureau of Mines (page images at HathiTrust)
• Stresses induced around mine development workings by undercutting and caving, climax molybdenum mine, Colorado (in two parts). 2, Strain and deformation measurement (U.S. Dept. of the Interior, Bureau of Mines, 1965), by Robert L. Bolmer and United States Bureau of Mines (page images at HathiTrust)
• A geometric method for the prediction of stresses in inclusions, orebodies, and mining systems (U.S. Bureau of Mines, 1974), by Clarence O. Babcock, Denver Mining Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• Nonuniform radial loads applied to the boundary of a circular hole in an infinite plate (U.S. Dept. of the Interior, Bureau of Mines, 1967), by Wilbur I. Duvall and Wilson Blake (page images at HathiTrust)
• Stresses and displacements surrounding an open pit in a gravity-loaded rock (U.S. Dept. of the Interior, Bureau of Mines, 1967), by Wilson Blake and United States Bureau of Mines (page images at HathiTrust)
• Triaxial method for determining the elastic constants of stress relief cores (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Leonard Adams Obert (page images at HathiTrust)
• Determination of principal stress directions through an analysis of rock joint and fracture orientations, Star Mine, Burke, Idaho (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Elbridge W. Gresseth (page images at HathiTrust)
• Modulus of elasticity of a rock determined by four different methods (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Francis X. Cannaday (page images at HathiTrust)
• Investigation of in situ rock stresses, Ruth Mining District, Nevada with emphasis on slope design problems in open-pit mines (U.S. Dept. of the Interior, Bureau of Mines, 1964), by S. Jackson Hubbard, Donald O. Rausch, Robert H. Merrill, and David W. Wisecraver (page images at HathiTrust)
• Development of a rock stress monitoring station based on the flat slot method of measuring existing rock stress (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Louis Anthony Panek and John A. Stock (page images at HathiTrust)
• Determination of stresses around an underground opening, Climax Molybdenum Mine, Colorado (U.S. Dept. of the Interior, Bureau of Mines, 1962), by Stephen Utter (page images at HathiTrust)
• Biaxial device for determining the modulus of elasticity of stress-relief cores (U.S. Dept. of the Interior, Bureau of Mines, 1962), by John Fitzpatrick (page images at HathiTrust)
• A method of determining dynamic tensile strength of rock at minimum loading (U.S. Dept. of the Interior, Bureau of Mines, 1962), by L. O. Bacon, Michigan College of Mining and Technology. Institute of Mineral Research, and United States Bureau of Mines (page images at HathiTrust)
• Effects of stress relief and other changes in stress on the physical properties of rock (U.S. Dept. of the Interior, Bureau of Mines, 1962), by Leonard Obert (page images at HathiTrust)
• Generation and propagation of strain waves in rock : part I (U.S. Dept. of the Interior, Bureau of Mines, 1950), by Leonard Obert and Wilbur I. Duvall (page images at HathiTrust)
• Structural design data for concrete drift linings in block caving stopes (U.S. Dept. of Interior, Bureau of Mines, 1973), by J. D. Dixon, Denver Mining Research Center (U.S.). Rock Mass Behavior Group, and United States Bureau of Mines (page images at HathiTrust)
• Moment distribution; a rapid method of analysis for rigid-jointed structures. (Wiley, 1961), by Edgar Lightfoot (page images at HathiTrust)
• Stresses about mine openings in a homogeneous rock body. (New York, 1951), by Louis Anthony Panek (page images at HathiTrust)
• Rahmenformeln. Gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus aisen- oder eisenbetonkonstruktion, nebst anhang mit sonder fällen teilweise und ganz eingespannter träger... (Wilhelm Ernst W. Sohn, 1914), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• Rahmenformeln; gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus eisen- oder eisenbetonkonstruktion nebst anhang mit sonderfällen teilweise und ganz eingespannter sowie durchlaufender träger (W. Ernst & sohn, 1923), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• The analysis of continuous frames by the method of restraining stiffnesses (W. H. Ellison, Earle Russell, consulting structural engineers, 1932), by Earle Brewster Russell (page images at HathiTrust)
• Strength of beams under transverse loads. (D. Van Nostrand company, 1893), by William Allan (page images at HathiTrust)
• Maximum stresses in framed bridges. (D. Van Nostrand, 1914), by Wm. Cain (page images at HathiTrust)
• Simplified methods for computing stresses in rigid frame buildings (Lefax (inc.), 1938), by Sheldon A. Keast (page images at HathiTrust)
• A practical treatise on the strength of materials: including their elasticity and resistance to impact. (E. & F.N. Spon, 1902), by Thomas Box (page images at HathiTrust)
• Statische tabellen, belastungsangaben und formeln zur aufstellung von berechnungen für baukonstruktionen, gesammelt und berechnet (W. Ernst & Sohn, 1912), by Franz Boerner (page images at HathiTrust)
• The calculations for steel-frame structures : designed to comply with the requirements of the London County Council (General Powers) Act, 1909 ... / by Walter Cyril Cocking. (Scott, Greenwood, 1925), by Walter Cyril Cocking (page images at HathiTrust)
• Strains in ironwork, a course of eight elementary lectures delivered before the society of engineers, in their hall, session 1882-3 (E. & F.N. Spon, 1898), by Henry Adams (page images at HathiTrust)
• Stresses in girder and roof trusses, for both dead and live loads by simple multiplication : with stress constants for 100 cases. (Spon, 1894), by F. R. Johnson (page images at HathiTrust)
• Schwächung des arbeitsvermögens der materialien durch spannungswechsel (Albert Müller, 1894), by Friedrich Autenheimer (page images at HathiTrust)
• Principles of economy in the design of metallic bridges (Wiley, 1891), by Charles B. Bender (page images at HathiTrust)
• Secondary stresses in bridge trusses. (Wiley, 1908), by C. R. Grimm (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings : including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... (J. Wiley & sons, 1889), by R. G. Hatfield (page images at HathiTrust)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials (Longmans, Green, 1873), by Bindon B. Stoney (page images at HathiTrust)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... (J. Wiley & sons, 1877), by Jakob J. Weyrauch, Robert Henry Thurston, and A. Jay Du Bois (page images at HathiTrust)
• Graphical analysis of stresses involved in designing frame structures : intended primarily for students of engineering ([s.n.], 1923), by George Peter Schubert (page images at HathiTrust)
• Practical wind bracing; a book containing easy and rapid methods of figuring wind stresses in high buildings (Buffalo, N.Y., 1930), by Harry Ellsworth Schneider (page images at HathiTrust)
• Theory and practice in designing (D. Van Nostrand company, 1911), by Henry Adams (page images at HathiTrust; US access only)
• Structural problems, part II (Engineering Society of the University of Toronto, 1921), by Clarence Richard Young (page images at HathiTrust)
• Calcul des constructions hyperstatiques, application d'une methode trés simple ... (Dunod, 1927), by J. Rieger and P. Carot (page images at HathiTrust; US access only)
• Versuche über die Widerstandsfähigkeit ebener Platten. (Julius Springer, 1891), by Carl Bach (page images at HathiTrust)
• A text-book on the mechanics of materials : and of beams, columns, and shafts (Wiley, 1894), by Mansfield Merriman (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts (J. Wiley, 1903), by Mansfield Merriman (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute (Wiley, 1890), by William H. Burr (page images at HathiTrust)
• Résistance des matériaux (L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations (J. Wiley & Sons; [etc., etc.], 1912), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• Structural mechanics (McGraw-Hill, 1932), by Harrison W. Hayward, Ralph G. Adams, Addison Francis Holmes, and Lowell Institute School for Industrial Foremen (page images at HathiTrust)
• Framed structures and girders, theory and practice ... (McGraw-Hill Book Company, 1911), by Edgar Marburg (page images at HathiTrust; US access only)
• Analysis of framed structures (McGraw-Hill Book Company, 1935), by John Horace Matthews and Phillip Ervin Soneson (page images at HathiTrust; US access only)
• Stress distributions in engineering materials. (London, 1921), by British Association for the Advancement of Science (page images at HathiTrust; US access only)
• Schwindspannungen in trägern aus eisenbeton; ein beitrag zu ihrer theorie samt ableitung von gebrauchsformeln auf grund neuerer versuche (A. Kröner, 1925), by Leopold Herzka (page images at HathiTrust; US access only)
• Ob odnoĭ zadachi͡e stroitelʹnoĭ mekhaniki. (Tip. I͡U.N. Ėrlik, 1904), by A. van der Vliet (page images at HathiTrust; US access only)
• Graficheskīĭ razschet t͡silindricheskikh svodov na osnovanīi teoriīi uprugosti. (Tip. i lit. V.A. Tikhanova, 1898), by N. Zhitkevich (page images at HathiTrust)
• Investigation of ship mooring forces; final report (Sierra Madre, Calif., 1953), by McGraw and Shapiro Carr (page images at HathiTrust)
• Bed shear stress coefficient within the surf zone (Naval Postgraduate School, 1977), by Carlos Severino Veitia Garcia (page images at HathiTrust)
• Die elastischen Platten : die Grundlagen und Verfahren zur Berechnung ihrer Formänderungen und Spannungen, sowie die Anwendungen der Theorie der ebenen zweidimensionalen elastischen Systeme auf praktische Aufgaben (Springer, 1925), by Arpád Nádai (page images at HathiTrust; US access only)
• Mechanical failures of metals in service (U.S. Govt. Print. Off.], 1954), by John A. Bennett and G. Willard Quick (page images at HathiTrust)
• An investigation of the stresses in a discontinuity region of a pressure vessel (Oak Ridge National Laboratory, 1958), by William LaVon Greenstreet and U.S. Atomic Energy Commission (page images at HathiTrust)
• Plane stress problems in the mathematical theory of elasticity (University of California Lawrence Radiation Laboratory, 1965), by Maurice Zaslawsky, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Gripped-end effect in tension proof testing of dimension lumber (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1991), by Angela M. Terry and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Distribution of wheel loads on timber bridges (U.S. Dept. of Commerce, National Bureau of Standards, Institute for Applied Technology; Distributed by: Clearinghouse for Federal Scientific and Technical Information, 1968), by E. C. O. Erickson and K.M. Romstad (page images at HathiTrust)
• Effect of deformed shanks, prebored lead holes, and grain orientation on the elastic bearing constant for laterally loaded nail joints (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Strength and stiffness of large-gap metal-plate wood connections (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994), by Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Machine stress rating : practical concerns for lumber producers (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1977), by W. L. Galligan, Gerald W Crow, Delos V Snodgrass, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Bending properties of four-layer nail-laminated posts (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994), by G. D. Williams, R. C. Moody, David R. Bohnhoff, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• A text-book on the mechanics of materials and of beams, columns, and shafts. (J. Wiley & sons, 1885), by Mansfield Merriman (page images at HathiTrust)
• Allowable bending stresses of wood for use in portable wood ladders (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1975), by Fred Werren, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Deflection and stresses of tapered wood beams (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1965), by A. Carl Maki, Edward W. Kuenzi, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Fiber stress values for design of glulam timber utility structures (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1995), by Roland Hernandez, Robert H. Falk, R. C. Moody, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Evolution of tensile design stresses for lumber (Forest Products Laboratory, 1979), by W. L. Galligan, Robert L. Ethington, C. C. Gerhards, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Finite element techniques for orthotropic plane stress and orthotropic plate analysis (U.S. Dept. of Agriculture, Forest Products Laboratory, 1968), by A. Carl Maki (page images at HathiTrust)
• Bending of a circular sandwich plate by load applied through an insert (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by Henry M. Montrey (page images at HathiTrust)
• Predicting performance of hardboard in I-beams (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Terry J. Ramaker and Michael D. Davister (page images at HathiTrust)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details ... (J. Wiley & sons, 1884), by A. Jay Du Bois (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (J. Wiley & sons; [etc., etc.], 1892), by Mansfield Merriman (page images at HathiTrust)
• A general method of analysis of primary creep data : (including analysis of uranium creep data) (U.S. Atomic Energy Commission, 1957), by K. R. Merckx, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• The dependence of thermal stresses in cylindrical reactor fuel elements upon the method of cooling (U.S. Atomic Energy Commission, 1957), by K. R. Merckx, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Analysis of simply supported grids of perpendicular beams (Oak Ridge National Laboratory, 1964), by F. J. Witt, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Analysis of stress and strain in spherical shells of pyrolytic carbon (Oak Ridge National Laboratory, 1964), by J. W. Prados, J. L. Scott, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Studies in mechanics of nonlinear solids (Lawrence Radiation Laboratory, 1964), by Richard Dong, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, United States. Energy Research and Development Administration, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Trusses and arches analyzed and discussed by graphical methods (J. Wiley, 1898), by Charles E. Greene (page images at HathiTrust; US access only)
• Theoretical analysis of scabbing in materials : interim technical report (University Park], 1955), by Pennsylvania State University. Dept. of Engineering mechanics, Norman Davids, and United States. Office of Ordnance Research (page images at HathiTrust)
• Calcul simplifié des poutres droites à plusieurs travées ... (Paris, 1887), by Édouard Linglin (page images at HathiTrust)
• Kinetic effects of crowds ([New York, 1913), by Charles Joseph Tilden (page images at HathiTrust)
• Die Festigkeitslehre. Elementares Lehrbuch für den Schul- und Selbstunterricht sowie zum Gebrauch in der Praxis, nebst einem Anhang enthaltend Tabellen der Potenzen, Wurzeln, Kreisumfänge und Kreisinhalte. (A. Bergsträsser, 1901), by R. Lauenstein (page images at HathiTrust; US access only)
• Dynamics, construction of machinery, equilibrium of structures and the strength of materials (Robert Baldwin, 1851), by George Finden Warr (page images at HathiTrust)
• The Roorkee manual of applied mechanics; direct and transverse strain, principally by analytical methods. (Thomason Civil Eng. Coll. Press, 1896), by Allan Cunningham and J. H. C. Harrison (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings. Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... (J. Wiley & sons, 1882), by R. G. Hatfield (page images at HathiTrust)
• The strains on structures of ironwork; with practical remarks on iron construction. (J. Weale, 1867), by F. W. Sheilds (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges (J. Wiley & Sons, 1883), by William H. Burr (page images at HathiTrust)
• Maximum stresses in framed bridges (D. Van Nostrand, 1878), by Wm. Cain (page images at HathiTrust)
• Theory of steel-concrete arches and of vaulted structures (Van Nostrand, 1909), by Wm. Cain (page images at HathiTrust)
• A practical treatise on the strength of material: including their elasticity and resistance to impact. (E. & F.N. Spon, 1883), by Thomas Box (page images at HathiTrust)
• Apparatus for measuring strain and applying stress [with an account of some experiments on the behaviour of iron and steel under stress] (Montreal, 1902), by E. G. Coker (page images at HathiTrust)
• Die graphische statik der baukonstruktionen. ([publisher not identified], 1912), by Heinrich F. B. Müller-Breslau (page images at HathiTrust; US access only)
• Die Berechnung statisch unbestimmter Tragwerke nach der Methode des Viermomentensatzes. (J. Springer, 1918), by Friedrich Bleich (page images at HathiTrust; US access only)
• Die berechnung der rahmenträger, mit besonderer rücksicht auf die anwendung (W. Ernst & sohn, 1919), by Fr. Engesser (page images at HathiTrust; US access only)
• On the stresses developed in beams loaded transversely. ([Montreal, 1902), by Henry T. Bovey (page images at HathiTrust)
• Memoria; punti di rottura e calo totale degli archi gravati di pesi continui, o discontinui. Coefficienti di elasticità delle pietre ... (Trani, 1887), by Alessandro Bajo (page images at HathiTrust)
• Rahmenformeln; gebrauchsfertige Formeln für einhüftige, zweistielige, dreieckförmige und geschlossene Rahmen aus Eisen- oder Eisenbeton konstruktion nebst Anhang mit Sonderfällen teilweise und ganz eingespannter Träger. (W. Ernst, 1921), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1895), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1894), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Über spannungslinien, mit anwendung auf den eisenbetonbau ... (Wittwer, 1917), by Alfred Jackson (page images at HathiTrust; US access only)
• Strength and calculation of dimensions of iron and steel constructions, with reference to the latest experiments. (D. Van Nostrand, 1877), by Jacob J. Weyrauch (page images at HathiTrust)
• Die Methode der Festpunkte zur Berechnung der statisch unbestimmten Konstruktionen mit zahlreichen Beispielen aus der Praxis insbesondere ausgefürten Eisenbetontragwerken (J. Springer, 1923), by Ernst Suter (page images at HathiTrust; US access only)
• A new extensometer. ([Montreal, 1902), by Henry T. Bovey (page images at HathiTrust)
• ... Stresses in structures and the accompanying deformations (J. Wiley & sons, inc.;, 1914), by A. H. Heller (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department Civil Engineering at the Rensselaer Polytechnic Institute. (J. Wiley, 1891), by William H. Burr (page images at HathiTrust)
• Die zusatzkräfte und nebenspannungen eiserner fachwerkbrücken : eine systematische darsteillung der verschiedenen arten ... ([s.n.], 1892), by Friedrich Engesser (page images at HathiTrust)
• A text-book of the strength of materials and of stresses in structures : for use in scientific high schools and schools of technology (Boardman School Press, 1897), by Thomas William Mather (page images at HathiTrust)
• Propagations of waves in solid media. (Ithaca, N.Y., 1951), by Cornell University. School of Mechanical Engineering. Department of Engineering Mechanics and Materials (page images at HathiTrust)
• The experimental stress analysis of the Firestone type R-5⁰, 20 x 75 truck rim. (Machine Design Laboratory, Sibley School of Mechanical Engineering, Cornell University, 1952), by Richard M. Phelan (page images at HathiTrust)
• Influence coefficients for toroidal shells. Uniform internal pressure acting on the convex surface. (Shell Development Co., 1958), by G. D. Galletly (page images at HathiTrust)
• Finite elastic analysis of an infinite plate with an elliptic hole. (School of Aeronautical and Engineering Sciences, Purdue University, 1961), by George Lianis (page images at HathiTrust)
• Vorlesungen über Statik der Baukonstruktionen und Festigkeitslehre. (Engelmann, 1903), by Georg Mehrtens (page images at HathiTrust; US access only)
• Investigation on buckling of rigid joint structures. (Ithaca, N. Y., 1949), by Cornell University. Department of Structural Engineering and P. P. Bijlaard (page images at HathiTrust)
• Partially plastic thick-walled cylinders. A portion of a research project entitled plastic behavior of engineering materials. (Dept. of Theoretical and Applied Mechanics, University of Illinois., 1952), by Montogomerie Christie Steele (page images at HathiTrust)
• On the stability of elastic equilibrium (National Aeronautics and Space Administration, 1967), by W. T. Koiter (page images at HathiTrust)
• Discontinuity stresses in metallic pressure vessels. (National Aeronautics and Space Administration;, 1971), by F. L. Rish, L. Kovalevsky, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Piping stress calculations simplified. (S.W. Spielvogel, 1961), by Siegfried Werner Spielvogel (page images at HathiTrust)
• Moments and shears in a force fitted rectangular plate, general model. Douglas report SM-42391. (Space Systems Engineering, Missile & Space Systems Division, Douglas Aircraft Co., Inc., 1962), by Inc. Missile and Space Systems Division Douglas Aircraft Company and George Stoffmacher (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design. (The author;, 1939), by Karl Dawson Wood (page images at HathiTrust)
• Axial tension and bending interaction curves for members loaded inelastically (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Don Orr Brush (page images at HathiTrust)
• Die Spannungen in einem auf mehreren Stützen in gleicher gegenseitiger Entfernung aufgelegten und zur Hälfte mit Wasser gefüllten Rohr. (Svenska bokhandelscentralen, 1926), by A. Frey Samsioe (page images at HathiTrust)
• A theory of the non-linear influence of normal stress on fatigue under combined stresses (Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1956), by J. J. Coleman and William Nichols Findley (page images at HathiTrust)
• Paper for first symposium on naval structural mechanics plasticity. (Division of Applied Mathematics, Brown University, 1958), by Daniel C. Drucker (page images at HathiTrust)
• Analysis of deformations of viscoelastic bodies due to gravitational forces. (School of Aeronautical Engineering, Purdue University, 1960), by George Lianis (page images at HathiTrust)
• Tests of eccentrically loaded columns. (Dept. of Engineering, University of California, 1954), by R. D. Chipman (page images at HathiTrust)
• Translation key to Kleinlogel's Mehrstielige Rahmen (multi-column frames) volumes 1 and 2. (F. Ungar, 1948), by Fred Blum and Adolf Kleinlogel (page images at HathiTrust; US access only)
• Theory of statically indeterminate structures (McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
• Buckling of uniformly compressed steel plates in the strain-hardening range. (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by Geerhard Haaijer (page images at HathiTrust)
• Energy versus stress theories for combined stress; a fatigue experiment using a rotating disc (Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1958), by William N. Findley (page images at HathiTrust)
• Working stresses for structural design. (Govt. Print. Off.], 1958), by United States Army Corps of Engineers (page images at HathiTrust)
• Modified theories of fatigue failure under combined stress (Urbana, 1954), by William N. Findley and P. N. Mathur (page images at HathiTrust)
• Report on the exploratory series of tests on longitudinal distribution of stresses in reinforcing bars. A cooperative project between the American Iron and Steel Institute and Cornell University. (Ithaca, N.Y., 1948), by Cornell University. School of Civil Engineering and American Iron and Steel Institute (page images at HathiTrust)
• Combined effects of axial load, thermal stress, and creep in flat plates (Wright Air Development Center, Air Research and Development Command, U. S. Air Force, 1958), by P. C. Huang and C. J. Van Der Maas (page images at HathiTrust)
• Tables for finding the strains in railway bridge trusses under the action of a concentrated load system. (Wiley, 1885), by A. Jay Du Bois (page images at HathiTrust)
• Stress analysis of pipe penetrations in spherical shells. ([Ithaca, N. Y.], 1959), by David Hugh Fleming-Brown (page images at HathiTrust)
• Stresses in simple framed structures : a text book to accompany exercises in the computation of the axial stresses in the members of load-bearing frames (Printed by the Burt-Haywood company, 1911), by Albert Smith (page images at HathiTrust; US access only)
• Damage to stainless steel fuel in Special Power Excursion Reactor Test reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by R. E. Heffner, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Tests of large bridge columns (U.S. Dept. of Commerce, Bureau of Standards :, 1918), by John Howell Griffith, J. Glenn Bragg, and United States. National Bureau of Standards (page images at HathiTrust)
• Test of 150-ton floating crane (U.S. Dept. of Commerce, Bureau of Standards :, 1920), by Louis John Larson, Richard Lawrence Templin, and United States. National Bureau of Standards (page images at HathiTrust)
• Stresses caused by cold-rolling (U.S. Dept. of Commerce, Bureau of Standards :, 1920), by Henry Marion Howe, Edward Center Groesbeck, and United States. National Bureau of Standards (page images at HathiTrust)
• Effect of repeated reversals of stress on double-reinforced concrete beams (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by Willis Appleford Slater, Harold Paul Mueller, George Albert Smith, and United States. National Bureau of Standards (page images at HathiTrust)
• Development of a method for measurement of internal stress in brass tubing (U.S. Dept. of Commerce, Bureau of Standards :, 1924), by Robert John Anderson, Everett Gustaf Fahlman, and United States. National Bureau of Standards (page images at HathiTrust)
• Release of internal stress in brass tubing (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Robert John Anderson, Everett Gustaf Fahlman, and United States. National Bureau of Standards (page images at HathiTrust)
• Flow in a low-carbon steel at various temperatures (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Herbert J. French, William Armistead Tucker, and United States. National Bureau of Standards (page images at HathiTrust)
• Shear tests of reinforced concrete beams (U.S. Dept. of Commerce, Bureau of Standards :, 1926), by Willis Appleford Slater and United States. National Bureau of Standards (page images at HathiTrust)
• Statical hysteresis in the flexure of bars (U.S. Dept. of Commerce, Bureau of Standards :, 1926), by Garbis H. Keulegan and United States. National Bureau of Standards (page images at HathiTrust)
• Development of procedures for rapid computation of dynamic structural response (University of Illinois, 1958), by John William Melin and Samuel Sutcliffe (page images at HathiTrust)
• The failure of plain and spirally reinforced concrete in compression (Engineering Experiment Station, University of Illinois, 1929), by Frank E. Richart, Rex Lenoi Brown, and Anton Brandtzæg (page images at HathiTrust)
• Studies of slab and beam highway bridges (Engineering Experiment Station, University of Illinois, 1946), by N. M. Newmark, Illinois. Division of Highways, United States. Bureau of Public Roads, and University of Illinois at Urbana-Champaign. Engineering Experiment Station (page images at HathiTrust)
• Solutions for certain rectangular slabs continuous over flexible supports : a report of an investigation conducted by the Engineering Experiment Station, University of Illinois in cooperation with the United States Bureau of Public Roads and the Illinois Division of Highways (University of Illinois, Engineering Experiment Station, 1938), by Vernon Peter Jensen, Illinois. Division of Highways, United States. Bureau of Public Roads, and University of Illinois. Engineering Experiment Station (page images at HathiTrust)
• Field investigation of prestressed reinforced concrete highway bridges : instrumentation for long-term field investigations (University of Illinois, 1967), by Robert James Reynolds, W. L. Gamble, and University of Illinois at Urbana-Champaign. Dept. of Civil Engineering (page images at HathiTrust)
• Strength and elasticity of structural members (E. Arnold, 1908), by Richard John Woods (page images at HathiTrust)
• Dynamic behavior of cylindrical shells under initial stress (Columbia University, Dept. of Civil Engineering and Engineering Mechanics, Institute of Flight Structures, 1960), by George Herrmann and Anthony E. Armenàkas (page images at HathiTrust)
• Residual stress and the yield strength of steel beams (Lehigh University, Department of Civil Engineering and Mechanics. Fritz Engineering Laboratory, 1951), by Ching Huan Yang and Welding Research Council (U.S.) (page images at HathiTrust)
• Progress report on slip of structural steel double-lap joints assembled with high-strength bolts. 1st- (Seattle, 1951), by University of Washington. Engineering Experiment Station and Research Council on Riveted and Bolted Structural Joints (page images at HathiTrust)
• Structural analysis. (International Textbook Co., 1960), by Jack C. McCormac (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations (J. Wiley & sons; [etc., etc.], 1908), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• The stresses in hooks and other curved beams (J. Selwyn, 1919), by Ewart S. Andrews (page images at HathiTrust)
• Gross panel strength under combined loading (Ship Structure Committee ;, 1977), by A. E. Mansour, United States. Ship Structure Committee, NAVSEC (Organization : U.S.), and inc Mansour Engineering (page images at HathiTrust)
• Examination of service and stress data of three ships for development of hull girder load criteria (U.S. Coast Guard Headquarters, 1979), by J. F. Dalzell, M. W. Hsu, N. M. Maniar, United States. Ship Structure Committee, NAVSEC (Organization : U.S.), M. Rosenblatt & Son, Stevens Institute of Technology, and United States Coast Guard (page images at HathiTrust)
• Determination of strain rates in ship hull structures : a feasibility study (Ship Structure Committee, 1984), by Julio G. Giannotti and Karl Stambaugh (page images at HathiTrust)
• Updating of fillet weld strength parameters for commercial shipbuilding. (Ship Structure Committee ;, 1984), by Newport News Shipbuilding and Dry Dock Company and United States. Ship Structure Committee (page images at HathiTrust)
• Fracture control for fixed offshore structures. (Ship Structure Committee ;, 1985), by Failure Analysis Associates and United States. Ship Structure Committee (page images at HathiTrust)
• Stress waves through projectile joints and interfaces (U.S. Army Laboratory Command, Ballistic Research Laboratory, 1989), by James M. Bender and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• Concrete quality assurance using accelerated strength testing (U.S. Army Engineer Waterways Experiment Station ;, 1984), by Steven A. Ragan, Structures Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Methodology for design and construction of drilled shafts in cohesive soils (The Office ;, 1984), by Lawrence D. Johnson and United States Army Corps of Engineers (page images at HathiTrust)
• Light airplane crash tests at three pitch angles (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by Victor L. Vaughan, Emilio Alfaro-Bou, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Stress intensity and crack displacement for small edge cracks (National Aeronautics and Space Administration, Scientific and Technical Information Division ;, 1988), by Thomas W. Orange and Lewis Research Center (page images at HathiTrust)
• Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP) : a proposal (National Aeronautics and Space Administration, Scientific and Technical Information Division ;, 1988), by James F. Saltsman, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Mixed finite element models for free vibrations of thin-walled beams (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Ahmed Khairy Noor, Byung-Jin Min, Jeanne M. Peters, and United States. National Aeronautics and Space Administration. Office of Management (page images at HathiTrust)
• On the state of stress near curvilinear holes in shells (National Aeronautics and Space Administration :, 1966), by Guriĭ Nikolaevich Savin and Guz,́ A. N. (page images at HathiTrust)
• Propagation of an arbitrarily oriented rectilinear crack during extension of a plate (National Aeronautics and Space Administration :, 1965), by V. V. Panasi︠u︡k, S. Ye Kovchik, and L. T. Berezhnitskiy (page images at HathiTrust)
• Stress concentration about curvilinear holes in physically nonlinear elastic plates (National Aeronautics and Space Administration :, 1966), by Aleksandr Nikolaevich Guzʹ, I. A. Tsurpal, and Guriĭ Nikolaevich Savin (page images at HathiTrust)
• Thermal and structural tests of René 41 honeycomb integral-tank concept for future space transportation systems (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by John L. Shideler and Dryden Flight Research Facility (page images at HathiTrust)
• Buckling and vibration analysis of a simply supported column with a piecewise constant cross section (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by Mark S. Lake, Martin M. Mikulas, and Langley Research Center (page images at HathiTrust)
• Analyses of surface cracks in finite plates under tension or bending loads (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by J. C. Newman, I. S. Raju, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Albert Kaufman, Shoi Y. Hwang, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• An update of the total-strain version of SRP (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by James F. Saltsman, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Hertzian contact in two and three dimensions (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by John H. Tripp and Lewis Research Center (page images at HathiTrust)
• Joint design for improved fatigue life of diffusion-bonded box-stiffened panels (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Randall C. Davis, Russell S. Kanenko, Paul L. Moses, and Langley Research Center (page images at HathiTrust)
• Nonlinear equations for dynamics of pretwisted beams undergoing small strains and large rotations (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Dewey H. Hodges and Aeromechanics Laboratory (page images at HathiTrust)
• Predicted and measured strain responses of isotropic panels to base excitation (National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by Karen H. Lyle, Edward F. Daniels, Jack D. Leatherwood, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Delamination stresses in semicircular laminated composite bars (National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by William L. Ko and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Procedures for characterizing an alloy and predicting cyclic life with the total strain version of strainrange partitioning (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by James F. Saltsman and Gary R. Halford (page images at HathiTrust)
• Tensile stress-strain behavior of boron/aluminum laminates (National Aeronoautics and Space Administration, Scientific and Technical Information Office ;, 1978), by J. A. Sova, C. C. Poe, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• A nonlinear high temperature fracture mechanics basis for Strainrange Partitioning (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Takayuki Kitamura, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Analysis and testing of axial compression in imperfect slender truss struts (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Mark S. Lake, Nicholas Georgiadis, and Langley Research Center (page images at HathiTrust)
• Open-mode delamination stress concentrations in horseshoe and elliptic composite curved bars subjected to end forces (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by William L. Ko, Raymond H. Jackson, and Dryden Flight Research Facility (page images at HathiTrust)
• Light airplane crash tests at three roll angles (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by Claude B. Castle, Emilio Alfaro-Bou, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• A critical examination of stresses in an elastic single lap joint (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by Paul A. Cooper, James Wayne Sawyer, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• An improved transverse shear deformation theory for laminated anisotropic plates (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by M. V. V. Murthy, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Elastic-plastic finite-element analysis of thermally cycled double-edge wedge specimens (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Albert Kaufman, Larry E. Hunt, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Materials constitutive modes for nonlinear analysis of thermally cycled structures (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Albert Kaufman, Larry E. Hunt, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Randall C. Davis, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Pressures, forces and moments, and shock shapes for a geometrically matched sphere-cone and hyperboloid at Mach 20.3 in helium (National Aeronatics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Robert L. Calloway and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effects of static tensile load on the thermal expansion of Gr/PI composite material (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Gary L. Farley, Army Research and Technology Laboratories (U.S.). Structures Laboratory, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Free vibrations of thin-walled semicircular graphite-epoxy composite frames (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Ahmed Khairy Noor, Jeanne M. Peters, Huey D. Carden, and Langley Research Center (page images at HathiTrust)
• An assessment of the accuracy of orthotropic photoelasticity (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1984), by M. W. Hyer, D. H. Liu, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• On the determination of micromorphic material constants from properties of the constituents (National Aeronautics and Space Administration ;, 1969), by Richard F. Maye, General Technology Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Monolithic and segmented brittle structures (National Aeronautics and Space Administration, 1964), by Robert L. Barrnett, James Costello, Paul Hermann, IIT Research Institute, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• On the duality between the problems of stretching and of bending of plates (National Aeronautics and Space Administration, 1967), by Z. M. Elias (page images at HathiTrust; US access only)
• Stresses in a webbed ball (National Aeronautics and Space Administration ;, 1975), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Experimental evaluation of stresses in spherically hollow balls (National Aeronautics and Space Administration ;, 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Experimental evaluation of stresses in cylindrically hollow (drilled) balls (National Aeronautics and Space Administration ;, 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• DESAP 1 : a structural design program with stress and displacement constraints (National Aeronautics and Space Administration ;, 1977), by G. B. Reddy and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Spin test of turbine rotor (National Aeronautics and Space Administration ;, 1972), by Michael H. Vavra, Lawrence E. Bell, James E. Hammer, United States National Aeronautics and Space Administration, and Naval Postgraduate School (U.S.) (page images at HathiTrust)
• Thermal-structural combined loads design criteria study (National Aeronautics and Space Administration ;, 1972), by V. Deriugin, Langley Research Center, and Boeing Company (page images at HathiTrust)
• Dynamic response of high-frequency pressure transducers to large amplitude sinusoidal pressure oscillations (National Aeronautics and Space Administration ;, 1972), by Richard E. Robinson, Lewis Research Center, and Battelle Memorial Institute (page images at HathiTrust)
• A Study of the stress wave factor technique for the characterization of composite materials (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Edmund G. Henneke, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Tensile stress-strain behavior of graphite/epoxy laminates (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by D. P. Garber, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Kentron Technical Center, and Langley Research Center (page images at HathiTrust)
• Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints : summary (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by J. B. Cushman, S. H. Ward, S. F. McCleskey, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
• Stresses at the tip of a longitudinal crack in a plate strip (National Aeronautics and Space Administration, 1967), by W. B. Fichter (page images at HathiTrust)
• NASA TN D-2005 (National Aeronautics and Space Administration, 1963), by Charles D. Babcock, E. E. Sechler, California Institute of Technology, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• An improved method for optimum design of mechanically and thermally loaded structures (National Aeronautics and Space Administration ;, 1975), by Howard M. Adelman, R. Narayanaswami, Joanne L. Walsh, and Langley Research Center (page images at HathiTrust)
• Analysis of bonded joints (National Aeronautics and Space Administration ;, 1975), by S. Srinivas and Langley Research Center (page images at HathiTrust)
• Supersonic flutter of panels loaded with inplane shear (National Aeronautics and Space Administration ;, 1975), by James Wayne Sawyer and Langely Research Center (page images at HathiTrust)
• Fatigue damage under varying stress amplitudes (National Aeronautics and Space Administration, 1960), by H. W. Liu, H. T. Corten, and University of Illinois (Urbana-Champaign campus) (page images at HathiTrust)
• NASA TN D-2395 (National Aeronautics and Space Administration :, 1964), by Bernard Gross, William F. Brown, John E. Srawley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-2396 (National Aeronautics and Space Administration :, 1964), by John E. Srawley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Die Äussern und innern Kräfte an statisch bestimmten Brücken- und Dachstuhlconstructionen. (Zürich, 1875), by L. Tetmajer (page images at HathiTrust)
• Effect of axial load on mode shapes and frequencies of beams (National Aeronautics and Space Administration ;, 1975), by Francis J. Shaker and Lewis Research Center (page images at HathiTrust)
• Cyclic debonding of unidirectional composite bonded to aluminum sheet for constant-amplitiude loading (National Aeronautics and Space Administration ;, 1976), by George L. Roderick, John H. Crews, Richard A. Everett, and Langley Research Center (page images at HathiTrust)
• NASA TN D-5947 (National Aeronautics and Space Administration :, 1970), by W. B. Fichter, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Estimation of stiffening effect of shaft and housing material outside projected area of a rolling element bearing (National Aeronautics and Space Administration ;, 1977), by Christopher M. Taylor, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4717 (National Aeronautics and Space Administration ;, 1968), by David J. Ayres, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effects of eccentricities and lateral pressure on the design of stiffened compression panels (National Aeronautics and Space Administration ;, 1972), by Gary L. Giles, Melvin S. Anderson, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Effect of a load-alleviating structure on the landing behavior of a reentry-capsule model (National Aeronautics and Space Administration :, 1961), by Edward L. Hoffman, John R. McGehee, Sandy M. Stubbs, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Analysis of frame-reinforced cylindrical shells (National Aeronautics and Space Administration, 1960), by Richard H. MacNeal and John A. Bailie (page images at HathiTrust)
• Stress and strain distributions in a thick-walled cylinder of strain-hardening material, elastic-plastically strained by internal pressure (NASA ;, 1965), by C. K. Liu (page images at HathiTrust)
• Shear-stress intensity factors for elastic sheets with cover plates (National Aeronautics and Space Administration ;, 1974), by W. B. Fichter and Langley Research Center (page images at HathiTrust)
• Effect of residual stresses induced by prestressing on rolling-element fatigue life (National Aeronautics and Space Administration ;, 1972), by Richard J. Parker, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Ring-baffle pressure distribution and slosh damping in large cylindrical tanks (National Aeronautics and Space Administration ;, 1972), by Harland F. Scholl, Phillip K. Davis, David G. Stephens, and Langley Research Center (page images at HathiTrust)
• High-temperature strength of refractory-metal wires and consideration for composite applications (National Aeronautics and Space Administration ;, 1972), by Donald W. Petrasek and Lewis Research Center (page images at HathiTrust)
• NASA TN D-3152 (National Aeronautics and Space Administration :, 1965), by John H. Crews, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Effects of sigma-phase formation on some mechanical properties of a wrought nickel-base superalloy (IN-100) (National Aeronautics and Space Administration ;, 1974), by Robert L. Dreshfield, Richard L. Ashbrook, and Lewis Research Center (page images at HathiTrust)
• Non-Hookean, premacroyield stress-strain behavior of several ionic single crystals (National Aeronautics and Space Administration :, 1964), by Carl A. Stearns, Edward R. Gotsky, and Lewis Research Center (page images at HathiTrust)
• Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature (National Aeronautics and Space Administration :, 1962), by Avraham Berkovits and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress-strain behavior of tungsten-fiber-reinforced copper composites (National Aeronautics and Space Administration, 1963), by David L. McDanels, John W. Weeton, Robert W. Jech, and Lewis Research Center (page images at HathiTrust)
• Investigation of the response of multiweb beams to static and dynamic loading. Wilbur B. Fichter and Eldon E. Kordes. (National Aeronautics and Space Administration :, 1962), by W. B. Fichter, Eldon E. Kordes, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6309 (National Aeronautics and Space Administration ;, 1971), by Gary R. Halford, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Stress-intensity factors for single-edge-notch specimens in bending or combined bending and tension by boundary collocation of a stress function (National Aeronautics and Space Administration ;, 1965), by Bernard Gross, John E. Srawley, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effects of creep stress on particulate aluminum-copper alloys (National Aeronautics and Space Administration, 1959), by Ervin E. Underwood, G. K. Manning, and Battelle Memorial Institute (page images at HathiTrust)
• A tabulation of wind-tunnel pressure data and section aerodynamic characteristics at Mach numbers of 1.61 and 2.01 for a reflex cambered wing and a cambered and twisted wing having the same swept planform (National Aeronautics and Space Administration :, 1962), by Emma Jean Landrum and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A preliminary experimental investigation of an energy-absorption process employing frangible metal tubing (National Aeronautics and Space Administration :, 1962), by John R. McGehee and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Investigations of grain-boundary stress concentrations in silver chloride (National Aeronautics and Space Administration, 1961), by Lawrence E. Goodman and University of Minnesota (page images at HathiTrust)
• Analysis of the three-point-bend test for materials with unequal tension and compression properties (National Aeronautics and Space Administration ;, 1974), by C. C. Chamis and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6376 (National Aeronautics and Space Administration :, 1971), by J. C. Newman, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress-rupture strength and microstructural stability of tungsten-hafnium-carbon-wire-reinforced superalloy composites (National Aeronautics and Space Administration ;, 1974), by Donald W. Petrasek, Robert A. Sigorelli, and Lewis Research Center (page images at HathiTrust)
• Recherches analytiques sur la flexion et la résistance des pièces courbes : accompagnées de tables numériques pour calculer la poussée des arcs chargés de poids d'une manière quelconque, et leur pression maximum sous une charge uniformément rèpartie (Mallet-Bachelier, imprimeur-libraire ;, 1854), by Jacques Antoine Charles Bresse (page images at HathiTrust)
• Leçons de mécanique pratique ... (L. Hachette et cie, 1857), by M. Morin (page images at HathiTrust)
• Elastic constants and sound velocities. [Part] III, The elastic constants of uranium (U.S. Atomic Energy Commission, Technical Information Division, 1949), by Henry L. Laquer and U.S. Atomic Energy Commission (page images at HathiTrust)
• Thermal ratcheting (United States Atomic Energy Commission, Technical Information Service, 1951), by J. E. Burke, Anna M. Turkalo, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Precision determination of elastic constants (United States Atomic Energy Commission, Technical Information Service, 1949), by Henry L. Laquer, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Temperature and stress formulae for cylinders with heat generated in the material (U.S. Atomic Energy Commission, Technical Information Service, 1953), by C. F. Leyse, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice. (Appleton, 1851), by Herman Haupt (page images at HathiTrust)
• A treatise on bracing : with its application to bridges and other structures of wood or iron (A. and C. Black ;, 1851), by Robert H. Bow (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (D. Appleton and Company, 1865), by Herman Haupt (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures : and their strength, consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. (D. Van Nostrand, 1869), by William Humber (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (D. Appleton and Co., 1862), by Herman Haupt (page images at HathiTrust)
• A semi-infinite plate on an elastic foundation (Cold Regions Research and Engineering Laboratory, 1965), by D. E. Nevel and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice ... (D. Appleton, 1981), by Herman Haupt (page images at HathiTrust; US access only)
• Introduction to the mathematical theory of the stress and strain of elastic solids (Longmans, Green, 1894), by Benjamin Williamson (page images at HathiTrust)
• Résistance des matériaux (L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• A rapid technique for predicting the general instability of ship grillages with elastically constrained edges (Naval Ship Research and Development Center, Naval Sea Systems Command, 1975), by John C. Adamchak, United States. Naval Sea Systems Command, and Naval Ship Research and Development Center (page images at HathiTrust)
• NACA wartime reports (Langley Memorial Aeronautical Laboratory, 1943), by Paul Kuhn, Simon H. Diskin, John E. Duberg, United States National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• The rolling pressures of uranium sheet and plate (Los Alamos Scientific Laboratory of the University of California, 1959), by John E. Hockett, R. K. Bates, J. E. Hoehne, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Stresses in thick slabs subjected to thermal loadings (Los Alamos Scientific Laboratory of the University of California, 1965), by Robert I. Brasier, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice (J. Wiley & sons, 1901), by J. B. Johnson, F. E. Turneaure, and Chales Walter Bryan (page images at HathiTrust)
• The dynamics of particles and of rigid elastic, and fluid bodies : being lectures on mathematical physics. (G. E. Stechert, 1922), by Arthur Gordon Webster (page images at HathiTrust)
• Safe building construction : a treatise giving in simplest forms possible practical and theoretical rules and formulae used in construction of buildings and general instruction (Macmillan Company, 1908), by Louis de Coppet Bergh (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges (J. Wiley & Sons [etc. etc.], 1902), by William H. Burr (page images at HathiTrust)
• The design of steel mill buildings and the calculation of stresses in framed structures. (The Engineering News Pub. Co., 1904), by Milo Smith Ketchum (page images at HathiTrust)
• Die neueren Methoden der Festigkeitslehre und der Statik der Baukonstruktionen. (A. Kröner, 1913), by Heinrich Mueller-Breslau (page images at HathiTrust; US access only)
• Engineering construction ... (Longmans, Green, and Co., 1910), by William Henry Warren (page images at HathiTrust)
• The design of structures: a practical treatise on the building of bridges, roofs, &c. (C. Griffin & Co., Ltd., 1919), by S. Anglin (page images at HathiTrust; US access only)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings (J. Wiley, 1888), by Jay Du Bois (page images at HathiTrust)
• The failure of metals under internal and prolonged stress, a general discussion. (Faraday Society, 1921), by F. S. Spiers (page images at HathiTrust; US access only)
• Tables for finding the strains in railway bridge trusses under the action of a concentrated load system : Reprinted from Strains in famed structures. (J. Wiley & sons, 1885), by Augustus Jay DuBois (page images at HathiTrust)
• A practical guide for puddling iron and steel (H. C. Baird, 1868), by Éd Urbin, A. A. Fesquet, and A. Brüll (page images at HathiTrust)
• [Interim report on ] stress distribution in engineering materials (s.n.], 1916), by British Association for the Advancement of Science, J.E. Patavel, E.G. Coker, and J. Perry (page images at HathiTrust; US access only)
• Die schwingungen eines trägers mit bewegter last. ([s.n.], 1896), by Heinrich Zimmermann (page images at HathiTrust)
• Applications de la statique graphique. ([s.n.], 1889), by Maurice Koechlin (page images at HathiTrust)
• Wind-tunnel investigation of the aerodynamic and structural-deflection characteristics of an inflatable airplane (GPO, 1962), by H. Clyde McLemore, United States National Aeronautics and Space Administration, and George C. Marshall Space Flight Center (page images at HathiTrust)
• An electrically-controlled single-lever testing-machine and some torsion tests (Institution of Mechanical Engineers, 1907), by Charles E. Larard and Institution of Mechanical Engineers (Grest Britain) (page images at HathiTrust; US access only)
• The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (J. Wiley & sons, 1893), by A. Jay Du Bois (page images at HathiTrust)
• The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (Wiley, 1891), by A. Jay Du Bois (page images at HathiTrust)
• Stress-life relation of the rolling-contact fatigue spin rig (National Advisory Committee for Aeronautics, 1957), by Robert H. Butler, Thomas L. Carter, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Thermal stress in the ISHR pressure vessel (United States Atomic Energy Commission, Technical Information Extension, 1955), by Irving Spiewak, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Preliminary results of stability calculations for the bending of box beams with longitudinally stiffened covers connected by posts (National Advisory Committee for Aeronautics, 1952), by Roger A. Anderson, Aldie E. Johnson, Wilder Thomas W., Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics (page images at HathiTrust)
• Some observations on loss of static strength due to fatigue cracks (National Advisory Committee for Aeronautics, 1955), by Walter Illg, Herbert F. Hardrath, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Preliminary investigation of the failure of pressurized stiffened cylinders (National Advisory Committee for Aeronautics, 1955), by Norris F. Dow, Roger W. Peters, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Pressure loads produced on a flat-plate wing by rocket jets exhausting in a spanwise direction below the wing and perpendicular to a free-stream flow of Mach number 2.0 (National Advisory Committee for Aeronautics, 1958), by Ralph A. Falanga, Joseph J. Janos, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics (page images at HathiTrust)
• The torque and wear charactersitics of water-lubricated ball bearings (Battelle Memorial Institute, 1957), by William H. Goldthwaite, C. Malcolm Allen, David W. Knoll, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Numerical solution of reactor stress problems (Battelle Memorial Institute ;, 1961), by Robert F. Redmond, Richard W. Clark, Lewis E. Hulbert, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• The Lateral stability of equal-flanged aluminum-alloy I-beams subjected to pure bending (National Advisory Committee for Aeronautics ;, 1940), by C. Dumont, H. N. Hill, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Some investigations of the general instability of stiffened metal cylinders. 9 - Criterions for the design of stiffened metal cylinders subject to general instability failures (National Advisory Committee for Aeronautics ;, 1947), by Louis G. Dunn and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. [Part] 1, Effects of triaxial stress states on the fracturing characteristics of 24S-T aluminum alloy (National Advisory Committee for Aeronautics, 1949), by A. W. Dana, G. Sachs, E. L. Aul, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. [Part] 2, Comparison of notch strength properties of 24S-T, 75S-T, and 24S-T86 aluminum alloy (National Advisory Committee for Aeronautics, 1949), by E. L. Aul, G. Sachs, A. W. Dana, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Elevated-temperature compressive stress-strain data for 24S-T3 aluminum-alloy sheet and comparisons with extruded 75S-T6 aluminum alloy (National Advisory Committee for Aeronautics, 1949), by William M. Roberts and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Mechanisms of failure of high nickel-alloy turbojet combustion liners (National Advisory Committee for Aeronautics, 1949), by John W. Weeton and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Direct method of design and stress analysis of rotating disks with temperature gradient (National Advisory Committee for Aeronautics, 1949), by S. S. Manson and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stresses in and general instability of monocoque cylinders with cutouts. VII - Experimental investigation of cylinders having either long bottom cutouts or series of side cutouts. (National Advisory Committee for Aeronautics, 1949), by Nicholas J. Hoff, Joseph J. Mele, Bruno A. Boley, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Critical stress of ring-stiffened cylinders in torsion (National Advisory Committee for Aeronautics, 1949), by Manuel Stein, Harold Crate, J. Lyell Sanders, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Compressive strength of flanges (National Advisory Committee for Aeronautics, 1950), by Elbridge Z. Stowell and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Buckling of thin-walled cylinder under axial compression and internal pressure (National Advisory Committee for Aeronautics, 1950), by Hsu Lo, Edward B. Schwartz, Harold Crate, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A recurrence matrix solution for the dynamic response of aircraft in gusts (National Advisory Committee for Aeronautics, 1950), by John C. Houbolt and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Analysis of plane-stress problems with axial symmetry in strain-hardening range (National Advisory Committee for Aeronautics, 1950), by M. H. Lee Wu and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• The effect of nonuniform temperature distributions on the stresses and distortions of stiffened-shell structures (National Advisory Committee for Aeronautics, 1950), by Richard R. Heldenfels and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A numerical method for the stress analysis of stiffened-shell structures under nonuniform temperature distributions (National Advisory Committee for Aeronautics, 1950), by Richard R. Heldenfels and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A structural-efficiency evaluation of titanium at normal and elevated temperatures (National Advisory Committee for Aeronautics, 1951), by George J. Heimerl, Paul F. Barrett, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Lateral elastic instability of hat-section stringers under compressive load (National Advisory Committee for Aeronautics, 1951), by Stanley Goodman and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• A method of calculating stresses in torsion-box covers with cutouts (National Advisory Committee for Aeronautics, 1951), by Richard Rosecrans and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Creep of lead at various temperatures (National Advisory Committee for Aeronautics, 1951), by Peter W. Neurath, J. S. Koehler, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Investigation of influence of chemical composition on forged modified low-carbon N-155 alloys in solution-treated and aged condition as related to rupture properties at 1200©� F (National Advisory Committee for Aeronautics, 1951), by E. E. Reynolds, A. E. White, J. W. Freeman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Charts and approximate formulas for the estimation of aeroelastic effects on the loading of swept and unswept wings (National Advisory Committee for Aeronautics, 1952), by Franklin W. Diederich, Kenneth A. Foss, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Creep in metals (National Advisory Committee for Aeronautics, 1952), by A. D. Schwope, L. R. Jackson, F. R. Shober, United States National Advisory Committee for Aeronautics, and Battelle Memorial Institute (page images at HathiTrust)
• Deflection and stress analysis of thin solid wings of arbitrary plan form with particular reference to delta wings (National Advisory Committee for Aeronautics, 1952), by Manuel Stein, John M. Hedgepath, J. Edward Anderson, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Theory and procedure for determining loads and motions in chine-immersed hydrodynamic impacts of prismatic bodies (National Advisory Committee for Aeronautics, 1952), by Emanuel Schnitzer, N. Grossman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Calibration of strain-gage installations in aircraft structures for the measurement of flight loads (National Advisory Committee for Aeronautics, 1953), by T. H. Skopinski, Wilber B. Huston, William S. Aiken, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stress distributions caused by three types of loading on a circular semimonocoque cylinder with flexible wings (National Advisory Committee for Aeronautics, 1954), by Harvey G. McComb and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• The effect of lateral inertia on the propagation of plastic strain in a cylindrical rod (Los Alamos Scientific Laboratory of the University of California, 1964), by G. P. DeVault, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The tensile properties of uranium in the inelastic range of stress (United States Atomic Energy Commission, Technical Information Service ;, 1956), by Robert Wells Lewis, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• The stress-strain characteristics of uranium (United States Atomic Energy Commission, Technical Information Service, 1955), by David A. McCutchan, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Thermal stress analysis of a cylinder of semi-plastic material (United States Atomic Energy Commission, Technical Information Service, 1956), by Donald Hunter, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Introduction to electrical-circuit analogies for beam analysis (National Advisory Committee for Aeronautics, 1952), by Stanley U. Benscoter, Richard H. MacNeal, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Statische Berechnung von Tunnelmauerwerk, Grundlagen und Anwendung auf die wichtigsten Belastungsfälle ... (W. Ernst, 1912), by Otto Kommerell (page images at HathiTrust; US access only)
• Bond stress in reinforced concrete beams (1915), by Robert Edgar Turley (page images at HathiTrust; US access only)
• Determination of the distribution of stresses and reactions in wide reinforced concrete beams (1913), by Otto Coffeen Fitz Randolph (page images at HathiTrust)
• An investigation of the stresses in cantilever flat slabs (1914), by George Alfred Maney (page images at HathiTrust; US access only)
• Metallic compression members (1912), by Raymond J. Roark (page images at HathiTrust; US access only)
• Secondary stresses (1913), by Joseph Earl Huber (page images at HathiTrust; US access only)
• Statically indeterminate stresses in stiff framed structures (1915), by Frank E. Richart (page images at HathiTrust; US access only)
• Strength of concrete in shear and compression (1906), by Julius Ernest Schoeller and Norman Edward Seavert (page images at HathiTrust; US access only)
• Stresses in railway structures on curves (1916), by Kaimin Kay Feng (page images at HathiTrust; US access only)
• Stresses in wire ropes bent over sheaves (1910), by William Francis Coleman and Daniel Maltby Rugg (page images at HathiTrust; US access only)
• The use of the strain gage to determine stresses in steel structures (1914), by George Paul Boomsliter (page images at HathiTrust; US access only)
• Wind stresses in the steel frames of office buildings (1917), by Camillo Weiss (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts (John Wiley & Sons ;, 1904), by Mansfield Merriman (page images at HathiTrust)
• Progress report. ([S.l.], 1918), by Special Committee on Stresses in Railroad Track (page images at HathiTrust)
• Influence lines for bridges and roofs. (J. Wiley, 1905), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• A text-book on roofs and bridges (J. Wiley, 1891), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
• Liste des membres de la commission d'organisation, membres du comité de patronage, dignitaires, donateurs et adhérents. Procès-verbaux in extenso des séances du Congrès (Vve C. Dunod, 1901), by Congrès international des méthodes d'essai des matériaux de construction (1900 : Paris), Louis Lucien Baclé, Paul Debray, and France) Exposition universelle internationale de 1900 (Paris (page images at HathiTrust; US access only)
• The strains in framed structures with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings (Wiley, 1892), by A. Jay Du Bois (page images at HathiTrust)
• Application of the energy test to the collapse of a long thin pipe under external pressure ... ([Cambridge, 1889), by George Hartley Bryan (page images at HathiTrust)
• [A] handy book for the calculation of strains in girders & similar structures & their strength : consisting of formulæ & corresponding diagrams ... (London, 1885), by William Humber (page images at HathiTrust)
• Kontinuierliche Balken mit konstantem Trägheitsmoment (Schulthess & Co., 1916), by Gustav Griot (page images at HathiTrust)
• Application de la résistance des matériaux au calcul des avions (Gauthier-Villars et cie., 1921), by L. Boilève (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley & Sons, 1897), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges (Wiley, 1888), by William H. Burr (page images at HathiTrust)
• Collapse load of a spherical cap (Armour Research Foundation, Illinois Institute of Technology, 1959), by Philip Gibson Hodge, U.S. Atomic Energy Commission, and Armour Research Foundation (U.S.) (page images at HathiTrust)
• Residual stresses in natural uranium fuel (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1961), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Heavy water components test reactor : Savannah River Plant : stress analysis of the reactor vessel (E.I. du Pont de Nemours & Co., Savannah River Laboratory, 1961), by H. W. Bellas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Repair of heat exchangers damaged by stress corrosion : Savannah River Plant (E.I. du Pont de Nemours & Co., Savannah River Laboratory, 1962), by H. W. Bellas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stress relaxation in stainless steel during irradiation (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1959), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stresses in rings (E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1957), by John W. Walker, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stresses in rings. Part II (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1958), by J. Walter Joseph, Savannah River Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vertical and drag ground-reaction forces developed in landing impacts of a large airplane (National Advisory Committee for Aeronautics, 1955), by Richard H. Sawyer, James M. McKay, Albert W. Hall, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Influence of alloying upon grain-boundary creep (National Advisory Committee for Aeronautics, 1956), by F. N. Rhines, M. A. Kissel, W. E. Bond, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An experimental study of arching in sand (Waterways Experiment Station, 1965), by James W. McNulty, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of horizontally oriented buried cylinders to static and dynamic loading (Waterways Experiment Station, 1965), by Albert F. Dorris (page images at HathiTrust)
• Hydraulic model investigation: Old River low-sill control structure, downpull forces on vertical-lift gates (Waterways Experiment Station, 1956), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• CWI Item No. 804, "Analysis of Hydraulic Experimental Data for the Development of Design Criteria." (Waterways Experiment Station, 1956), by Waterways Experiment Station (U.S.), United States Army Corps of Engineers, and United States. Army. Corps of Engineers. Omaha District (page images at HathiTrust)
• Measuring soil properties in vehicle mobility research : report 2 : an evaluation of the rectangular hyperbola for describing the load-deformation response of soils (Waterways Experiment Station, 1965), by N. R. Murphy, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of sample disturbance on soils using the concept of "reference strain" (U.S. Army Engineer Waterways Experiment Station, Geotechnical Laboratory, 1979), by Vincent P. Drnevich, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Foundation investigations, NASA Mississippi Test Facility : report 2 : static load testing of foundation piles at test stand S-II, AI (Waterways Experiment Station, 1970), by John B. Stevens, Robert G. Guernsey, and Jack Fowler (page images at HathiTrust)
• Analysis of stress and strain distributions in triaxial tests using the method of finite elements (Waterways Experiment Station, 1973), by Narayanaswamy Radhakrishnan (page images at HathiTrust)
• Stresses in rings deformed out of their planes (Atomic Products Division, 1958), by Bernard W. Shaffer, Eric E. Ungar, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• Some simplified solutions for relatively stiff beams on elastic foundations (Atomic Products Division, 1958), by Bernard W. Shaffer, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• Stress resultants and out-of-plane deformations in stiff rings attached to elastic cylinders and subject to concentrated loads (Atomic Products Division, 1958), by Bernard W. Shaffer, Eric E. Ungar, General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Structural analysis of the ANP concentric ring fuel element (General Electric, Nuclear Materials and Propulsion Operation, 1961), by D. R. Riley, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Tapped holes in beryllium (General Electric, Nuclear Materials and Propulsion Operation., 1961), by A.D. Feith, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Join computer program (General Electric, Nuclear Materials and Propulsion Operation., 1961), by John Wallach, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• The elastic-plastic stresses within a tube generating internal heat uniformly (General Electric, Nuclear Materials and Propulsion Operation., 1961), by Bernard W. Shaffer, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Stresses in hexagonal tubes (General Electric, Nuclear Materials and Propulsion Operation., 1961), by H. J. Kurtz, F. E. Wells, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• The strains in framed structures, with numerous applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and drawn spans, continuous girders, etc. Also, determination of dimensions and designing of details. (J. Wiley, 1890), by A. Jay Du Bois (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges. (J. Wiley, 1886), by William H. Burr (page images at HathiTrust)
• Stresses and thrusts : a text-book for students (B.T. Batsford, 1895), by G. A. T. Middleton (page images at HathiTrust)
• The Winslow tables. Diagrams for calculating the strength of wood, steel, and cast-iron beams and columns (The Engineering news publishing company, 1900), by Benjamin E. Winslow (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1899), by J. B. Johnson, C. W. Bryan, and F. E. Turneaure (page images at HathiTrust)
• Les grandes vitesses des chemins de fer : Les oscillations du matériel et la voie. (Paris, 1906), by Georges Marié (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs. Illustrated with numerous wood engravings. (J. Wiley & sons, 1883), by De Volson Wood (page images at HathiTrust)
• Stiffness matrix for a rectangular plate element of anisotropic material (Purdue University Agricultural Experiment Station, 1970), by Michael O. Hunt and Stanley K. Suddarth (page images at HathiTrust; US access only)
• Stresses in structures and the accompanying deformations. (John Wiley & Sons;, 1908), by A. H. Heller (page images at HathiTrust)
• Correlation of experimental data with theory for perforated plates with a triangular hole array (Knolls Atomic Power Laboratory, General Electric Company, 1958), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Thermal-stress ratchet mechanism in pressure vessels (Knolls Atomic Power Laboratory, General Electric Company, 1959), by D.R. Miller, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Calculation of stress and strain from triaxial test data on undrained soil specimens (Waterways Experiment Station, 1971), by J. Q. Ehrgott, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Tensile testing of soils; a literature review (U.S. Army Engineer Waterways Experiment Station, 1973), by Mosaid M. Al-Hussaini and Frank C. Townsend (page images at HathiTrust; US access only)
• Effect of loading rate on the stress-strain characteristics of a clay shale in unconsolidated-undrained triaxial compression (Waterways Experiment Station, 1973), by Randy A. Knott, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Defense Nuclear Agency (page images at HathiTrust)
• An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials (U.S. Army Engineer Waterways Experiment Station, 1978), by George Y. Baladi, Geotechnical Laboratory (U.S.), and United States. Assistant Secretary of the Army (R & D) (page images at HathiTrust)
• Loading rate effects on compressibility of sand : final report (U.S. Army Engineer Waterways Experiment Station ;, 1979), by John Guy Jackson, Behzad Rohani, John Q. Ehrgott, United States. Defense Nuclear Agency, and Waterways Experiment Station (U.S.). Structures Laboratory (page images at HathiTrust)
• Effects of axial restraint on length change of expanding mortar bars (Waterways Experiment Station, 1969), by Billy J. Houston (page images at HathiTrust)
• Equipment and test procedure for determining multiaxial tensile and combined tensile-compressive strength of concrete (U.S. Waterways Experiment Station Experiment Station, 1974), by K. L. Saucier (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. report 2, The dynamic response of deep slabs Project Hercules (Waterways Experiment Station, 1969), by Gayle E. Albritton, K. M. Cole, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. report 1, Review of the literature and nuclear weapons effects pertaining to deep slabs (Waterways Experiment Station, 1969), by Gayle E. Albritton, K. M. Cole, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 4 : Mine Shaft Series, Mine Under Event, Program 3, structural response, deep-slab tests (Waterways Experiment Station, 1969), by Gayle E. Albritton, David M. Bayer, Jimmy Piroshaw Balsara, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. report 5, Static tests of deep square composite slabs (Waterways Experiment Station, 1970), by James E. Beavers, Gayle E. Albritton, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 6 : Mine Shaft Series, Mineral Rock Event, Program 3, structural response studies, deep-slab tests, Phase 2 (Waterways Experiment Station, 1970), by James M. Watt, Gayle E. Albritton, Jimmy Piroshaw Balsara, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 7 : static tests of deep slabs having various span-to-thickness ratios (Waterways Experiment Station, 1971), by James E. Beavers, Gayle E. Albritton, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 9 : summary report (Waterways Experiment Station, 1973), by Gayle E. Albritton, Roger D. Crowson, Waterways Experiment Station (U.S.). Weapons Effects Laboratory, and United States. Defense Nuclear Agency (page images at HathiTrust)
• Subscale static tests, closure analysis and test program : report 1 : data report for first-phase tests (Waterways Experiment Station, 1970), by James M. Watt (page images at HathiTrust)
• Subscale static tests, closure analysis and test program : report 2 : data report for second-phase tests (Waterways Experiment Station, 1970), by James M. Watt (page images at HathiTrust)
• Investigation of K₀ testing in cohesionless soils : final report (Waterways Experiment Station, 1975), by Mosaid M. Al-Hussaini and Frank C. Townsend (page images at HathiTrust)
• Effect of shear stress on dynamic bulk modulus of sand (The Station, 1978), by John H. Schmertmann, University of Florida. Department of Civil Engineering, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• An effective stress model for ground motion calculations : final report (U.S. Army Engineer Waterways Experiment Station ;, 1979), by George Y. Baladi, United States. Defense Nuclear Agency, and Waterways Experiment Station (U.S.). Structures Laboratory (page images at HathiTrust)
• On the strains in curved masonry dams. ([San Francisco, 1889), by Hubert Vischer and Luther Wagoner (page images at HathiTrust)
• The use of soap films in solving torsion problems (Institution, 1917), by Alan Arnold Griffith and Geoffrey Ingram Taylor (page images at HathiTrust; US access only)
• Stresses in rotating disks due to non-central holes (University of California, Library Photographic Service, 1950), by Kenneth Edwin Barnhart (page images at HathiTrust)
• Zweigelenkrahmen aus Eisenbeton mit Berücksichtigung des veränderlichen Trägheitsmoments. (Ernst, 1920), by Hans Kuball (page images at HathiTrust)
• Analysis of continuous skewed slab bridge structures; first annual progress report. Project EES-170. (Engineering Experiment Station, Ohio State University, 1961), by Asim Yeginobali and Richard W. Bletzacker (page images at HathiTrust; US access only)
• Analysis of nonhomogeneous polar-orthotropic circular disks of varying thickness. (Engineering Experiment Station, College of Engineering, Ohio State University, 1962), by Charles Wesley Bert (page images at HathiTrust)
• Stress lines in beams of unsymmetrical cross section. (Media, Pa., 1918), by C. M. Broomall (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures, and their strength : consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. etc. (Crosby Lockwood and Co., 1880), by William Humber (page images at HathiTrust)
• Dynamics of particles, of rigid, elastic, and fluid bodies; being lectures on mathematical physics. (Tuebner, 1904), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• An investigation of web stresses in reinforced concrete beams (University of Illinois, 1927), by Frank E. Richart and Louis John Larson (page images at HathiTrust)
• Rolling tests of plates (University of Illinois, 1929), by Wilbur M. Wilson (page images at HathiTrust; US access only)
• Fatigue tests of riveted joints : a report of an investigation conducted by the Engineering Experiment Station, University of Illinois, in coöperation with the Department of Public Works, State of California (University of Illinois, 1938), by Wilbur M. Wilson, Frank Peter Thomas, and California. Department of Public Works (page images at HathiTrust; US access only)
• Concrete cradles for large pipe conduits (Iowa State College, 1926), by W. J. Schlick and James Whitmore Johnson (page images at HathiTrust)
• On the stability of stiffened plates (U.S. Experimental Model Basin, Navy Yard, 1935), by Stephen Timoshenko, Dwight F. Windenburg, M.C. Roemer, and U.S. Experimental Model Basin (page images at HathiTrust)
• Prediction of dimensional changes in uranium fuel elements during irradiation : the elastic solution : interim report ([Washington, D.C. : Office of Technical Services, Department of Commerce], 1960., 1960), by Peter R. Morris, Richard N. Thudium, U.S. Atomic Energy Commission, and National Lead Company of Ohio. Feed Materials Production Center (page images at HathiTrust)
• An analysis of the stresses in the Michigan avenue two ringed arch bridge over the Grand River at Lansing, Michigan (1912), by Duane A. Blair and Channing Wilson Parsons (page images at HathiTrust; US access only)
• A stress analysis of silo construction (1915), by Raymond F. Giffels and Bertram Giffels (page images at HathiTrust)
• The analysis of the Lansing State Savings Bank building (1918), by Morris A. Harkavy and Russell Vivian Perry (page images at HathiTrust; US access only)
• Tables for stress calculation & problems in deflections (1914), by John R. Lambert (page images at HathiTrust; US access only)
• An analysis of the stresses in the Washington Avenue concrete arch bridge over the Grand River at the city of Lansing, Michigan (1913), by Joseph A. Macdonald and Earle Horton Meyer (page images at HathiTrust; US access only)
• Investigation of shearing stresses in reinforced concrete beams (1916), by Wilhelm Neilson (page images at HathiTrust; US access only)
• Investigation of stresses in East Lansing water tower (1915), by Carl H. Peterson (page images at HathiTrust; US access only)
• Pressure of granular substances in long tubes (1898), by Frank V. Warren (page images at HathiTrust)
• Analysis and assessment of major uncertainties associated with ship hull ultimate failure. (Ship Structure Committee ;, 1985), by United States. Ship Structure Committee, United States Coast Guard, and Inc Hydromechanics (page images at HathiTrust)
• Strain rate effect on the strength of frozen silt (U.S. Dept. of Defense, Dept. of the Army, Corps of Engineers, Cold Regions Research and Engineering Laboratory, 1975), by F. Donald Haynes, J. Kalafut, J. A. Karalius, United States. Army. Corps of Engineers. Office of Research and Development, and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Inelastic stress in a long cylindrical shell under a band of pressure (Atomics International, 1962), by T. C. Yen, W. F. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effect of combined stress on yield and fracture behavior of zircaloy-2 (Knolls Atomic Power Laboratory, General Electric Company, 1959), by R. L. Mehan, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Cyclic strain fatigue of Inconel at 75 to 600°F (Knolls Atomic Power Laboratory, General Electric Company, 1960), by A. E. Dinerman, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Experimental stress analysis of a circular bubble chamber window with a beveled mounting (Midwestern Universities Research Association ;, 1961), by Andres Peekna, John W. Mark, U.S. Atomic Energy Commission, and Midwestern Universities Research Association (page images at HathiTrust)
• Stress analysis of a pressure-vessel head with square holes (Knolls Atomic Power Laboratory, General Electric Company, 1962), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Effect of hydrogen on the strain fatigue properties of zircaloy-2 weld metal (Knolls Atomic Power Laboratory, General Electric Company, 1962), by S. Beitscher, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Calculation of mechanical behavior of materials through true stress-true strain relationships (Atomics International, 1962), by W. J. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Yielding and flow of sapphire ([alpha]-A1b2sOb3s) crystals (Atomics International, 1961), by H. Conrad, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Model test for stresses and deflections in the N.S. Savannah reactor vessel model and attachments (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1961., 1961), by R. E. Vining, U.S. Atomic Energy Commission. New York Operations Office, and Pa.). Laboratories for Research and Development Franklin Institute (Philadelphia (page images at HathiTrust)
• Stress-strain-temperature-time relationships for refractory materials (Atomics International, 1958), by R. D. Chipman, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• High-temperature-strain fatigue testing with a modified direct-stress fatigue machine (Atomics International, 1959), by W. F. Anderson, C. R. Waldron, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Strain-gage study of internally cooled exhaust valves having various throat designs (National Advisory Committee for Aeronautics ;, 1946), by Arthur G. Holms, Richard D. Faldetta, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Flexural characteristics of radially loaded cylindrical shells with stiffening rings (Sandia Corporation ;, 1961), by D. R. Fisher and Sandia Corporation (page images at HathiTrust)
• Stress analysis of circular semimonocoque cylinders with cutouts by a perturbation load technique (National Advisory Committee for Aeronautics, 1954), by Harvey G. McComb and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of the creep lifetime of 75S-T6 aluminum-alloy columns (National Advisory Committee for Aeronautics, 1954), by Eldon E. Mathauser, William A. Brooks, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Torsional vibrations of hollow thin-walled cylindrical beams (National Advisory Committee for Aeronautics, 1954), by Edwin T. Kruszewski, Eldon E. Kordes, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Analysis of stresses in bellows (Atomics International, 1964), by W. F. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stress analysis of Hallam Nuclear Power Facility loading-face shield (Atomics International, 1960), by R. D. Chipman, R. M. Peterson, M. D. Lynch, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A preliminary investigation of the tensile properties of beryllium couplings (Oak Ridge, Tennessee : United States Atomic Energy Commission, Office of Technical Information, 1957., 1957), by J. Greenspan, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Beryllium-clad uranium elements, fabrication development by multi-temperature extrusion, and dimensional stability on thermal cycling (Oak Ridge, Tennessee : United States Atomic Energy Commission, Office of Technical Information, 1960., 1960), by J. Greenspan, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust)
• NACA Wartime Reports. Series L. (National Advisory Committee for Aeronautics, 1945), by James P. Peterson, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• NACA Wartime Reports. Series L. (National Advisory Committee for Aeronautics, 1944), by Paul Kuhn, L. Ross Levin, Langley Aeronautical Laboratory, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of web stresses in reinforced concrete beams (1911), by William Iverson Hargis (page images at HathiTrust)
• Discontinuity stresses in shells general model (Missile & Space Systems Division, Douglas Aircraft Co., 1962), by R. R. Meyer and Douglas Aircraft Company (page images at HathiTrust)
• Manual on experimental stress analysis techniques. (Cambridge, Mass., 1959), by Society for Experimental Stress Analysis (page images at HathiTrust)
• Catalog of equipment used in experimental stress analysis. (Cambridge, Mass., 1958), by Society for Experimental Stress Analysis (page images at HathiTrust; US access only)
• Simplified graphical distribution of moments in rigid frames. ([publisher not identified], 1948), by Anatol Alexander Eremin (page images at HathiTrust)
• Fundamental study of creep-rupture under combined stress (Middletown, Connecticut : Pratt & Whitney Aircraft Division, United Aircraft Corporation, CANEL Operations ; Washington, D.C. : Available from the Office of Technical Services, 1961., 1961), by G. H. Rowe, J. R. Stewart, U.S. Atomic Energy Commission, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• Pressures in Silos ; methods of computing pressures in silos (William Ernst & Son ;, 1920), by E. Lufft (page images at HathiTrust; US access only)
• Computation of stresses in reinforcement steel and penstock liners. (Denver, Colo., 1960), by United States. Bureau of Reclamation. Automatic Data Processing Branch (page images at HathiTrust; US access only)
• Drang und zwang. (R. Oldenbourg, 1920), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust)
• Improving the distribution and reducing the magnitude of pavement damage (The Administration ;, 1980), by United States. Federal Highway Administration. Structures and Applied Mechanics Division (page images at HathiTrust)
• Loads on pipe in wide ditches (Iowa State College, 1932), by W. J. Schlick (page images at HathiTrust)
• Practical design of wind bracing. (American Institute of Steel Construction, 1927), by Clyde T. Morris (page images at HathiTrust)
• Flexural behavior, strength and ultimate design of prestressed concrete beams. (Distributed by the Illini Union Bookstore [University of Illinois], 1963), by Narbey Khachaturian (page images at HathiTrust)
• Design of rigid frames : Parts 1-2 (International Textbook Co., 1942), by Meyer Hirschthal (page images at HathiTrust)
• Wood structural design data. Amendment to volume 1. (Washington, D.C., 1955), by National Lumber Manufacturers Association (page images at HathiTrust)
• Instability phenomena in thin-walled cylinders (Pittsburgh, Pennsylvania. : Bettis Plant, 1956., 1956), by W. R. Russ, Frederick Forscher, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Seal-shell-2 : a computer program for the stress analysis of a thick shell of revolution with axisymmetric pressures, temperatures, and distributed loads (Washington, D.C. : Office of Technical Services, Department of Commerce, 1963., 1963), by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Structure design notes : calculation of stresses, forces, and deflections in linear-elastic skeleton structures with temperature, pressures, applied loads and redundant loads (Washington, D.C. : Office of Technical Services, Department of Commerce, 1964., 1964), by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stress-strain characteristics and slip band formation in metal crystals (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by Fred D. Rosi, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Subsurface accelerations and strains from an underground detonation. Part II ([Armed Forces Special Weapons Project, U.S. Headquarters Field Command], 1959), by F. A. Pieper, R. H. Sievers, A. C. Tiemann, United States. Army. Engineer Research and Development Laboratories, U.S. Army Ballistic Research Laboratory, and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Operation NOUGAT and STORAX (College Park, Maryland : U.S. Bureau of Mines, Applied Physics Laboratory, 1964., 1964), by Leonard Obert, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effects of boundary friction on transmission of static stress through sand in cylindrical tanks (Kirtland Air Force Base, New Mexico : Research and Technology Division, Air Force Weapons Laboratory, Air Force Systems Command, 1965., 1965), by Phillip A. Abbott, Air Force Weapons Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An analysis of the stress distributions in and near stress gages embedded in elastic solids. (U. S. Bureau of Reclamation, 1950), by G. E. Monfore (page images at HathiTrust)
• Photoelastic stress analysis of bridge piers (Technical Information Office, 1952), by H. Boyd Phillips and Carl N. Zangar (page images at HathiTrust)
• The structural behavior of Hungry Horse Dam. (Technical Information Branch, Denver Federal Center, 1959), by Joe T. Richardson (page images at HathiTrust)
• Beggs deformeter stress analysis of single barrel conduits (U.S. Dept. of the Interior, Bureau of Reclamation; [for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1968), by H. Boyd Phillips and Ira E. Allen (page images at HathiTrust; US access only)
• Photoelastic and experimental analog procedures (Technical Information Branch, Denver Federal Center, 1962), by W. T. Moody, H. Boyd Phillips, and United States Bureau of Reclamation (page images at HathiTrust; US access only)
• Engineering and design : working stresses for structural design. (Dept. of the Army, Office of the Chief of Engineers, 1963), by United States Army Corps of Engineers (page images at HathiTrust)
• Time-dependent behavior of noncomposite and composite post-tensioned concrete girder bridges (University of Illinois at Urbana-Champaign, 1976), by A. I Fadl, W. L. Gamble, and Illinois. Department of Transportation (page images at HathiTrust)
• Compressive properties; perforated cover plates for steel columns. Progress report no. 1- (Committee on Technical Research, American Institute of Steel Construction, 1941), by United States. Bureau of Standards (page images at HathiTrust; US access only)
• Preliminary impact studies--Skunk River bridge on the Lincoln highway near Ames, Iowa (Iowa State College of Agriculture and Mechanic Arts, 1922), by Almon Homer Fuller (page images at HathiTrust)
• Load concentrations on steel floor joists of wood floor highway bridges (Iowa State College of Agriculture and Mechanic Arts, 1919), by T. R. Agg and Charles Sabin Nichols (page images at HathiTrust)
• The engineering application of the absolute rate theory to plastics: I. Laminates (Salt Lake City, 1951), by Mervin B. Hogan (page images at HathiTrust)
• Derivation of equations for the stresses and strains in a cylindrical viscoelastic case-bonded grain (Aberdeen, Maryland : Aberdeen Proving Ground, 1961., 1961), by A. S. Elder, U.S. Army Ballistic Research Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Elastic response to blast loading of strain-rate dependent cantilevers (Aberdeen, Maryland : Aberdeen Proving Ground, 1962., 1962), by W. E. Baker, B. J. Lindenberger, John W. Hanna, U.S. Atomic Energy Commission, and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• Tables of self-equilibrating functions and some applications (Schenectady, New York : Knolls Atomic Power Laboratory, 1953., 1953), by G. Horvay, J. S. Born, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Solution of beam problems by biharmonic polynomials which separate the effects of boundary shears and boundary normal stresses (Schenectady, New York : Knolls Atomic Power Laboratory, General Electric Company, [1953], 1953), by G. Horvay, J. S. Born, R. T. Gray, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Stresses in a semi-infinite thin-walled cylinder caused by an exponential temperature distribution (Schenectady, New York : Knolls Atomic Power Laboratory, General Electric Company, [1955], 1955), by W. E. Cooper, J. L. Noble, M. T. Roche, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• The end problem of rectangular strips (Schenectady, New York : Knolls Atomic Power Laboratory, 1953., 1953), by G. Horvay, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Gravitational stresses in a disk supported at the ends of the horizontal diameter (Schenectady, New York : Knolls Atomic Power Laboratory, 1951., 1951), by G. Horvay, Hillel Poritsky, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Deformations and stresses in circular cylindrical shells caused by pipe attachment. Part VII, Work charts for off-center loading (Schenectady, New York : Knolls Atomic Power Laboratory, 1953., 1953), by M. T. Roche, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Photoelastic studies of crack propagation and crack arrest ([Washington, D.C.] : Office of Nuclear Regulatory Commission, Division of Reactor Safety Research, 1977., 1977), by George Rankin Irwin, U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research, and College Park. Department of Mechanical Engineering University of Maryland (page images at HathiTrust)
• Wood structural design data. ([Washington], 1948), by National Lumber Manufacturers Association (page images at HathiTrust; US access only)
• Stress-strain-time behavior of soil in one dimensional compression. ([Cambridge?], 1963), by Robert V. Whitman (page images at HathiTrust; US access only)
• Review of previous work on short-time tests for predicting fatigue properties of materials. (Wright Air Development Center, Air Research and Development Command, U.S. Air Force, 1953), by Franz H. Vitovec (page images at HathiTrust; US access only)
• Crack problems in the mathematical theory of elasticity (North Carolina State College, Departments of Mathematics and Engineering Research, 1961), by Ian Naismith Sneddon (page images at HathiTrust)
• Theory of notch stresses: principles for exact calculation of strength with reference to structural form and material. (USAEC Office of Technical Information, 1961), by Heinz Neuber (page images at HathiTrust)
• TECO design manual for TECO timber connector construction. (Timber Engineering Company, 1962), by Timber Engineering Company (page images at HathiTrust; US access only)
• Thermal stresses in composite bridge beams : working plan (Virginia Council of Highway Investigation and Research, 1960), by William Zuk and Virginia Council of Highway Investigation and Research (page images at HathiTrust; US access only)
• The experimental verification of theory for suspension bridge analysis (Oregon State highway commission, 1942), by Conde B. McCullough, Richard Rosecrans, and Glenn Stewart Paxson (page images at HathiTrust)
• Airplane stress analysis. (Ryan aeronautical institute, 1942), by San Diego Ryan Aeronautical Institute (page images at HathiTrust; US access only)
• Local stress-strain approach to cumulative fatigue damage analysis : final report (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1974), by JoDean Morrow, N. E. Dowling, J. F. Martin, and University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• Manual on experimental stress analysis techniques. ([s.n.], 1957), by Society for Experimental Stress Analysis (page images at HathiTrust)
• Fatigue failure under combinations of stresses (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1954), by William N. Findley, D. E. Martin, Prem Narain Mathur, and University of Illinois at Urbana-Champaign. Dept. of Theoretical and Applied Mechanics (page images at HathiTrust; US access only)
• The supporting strengths of cast iron water pipe., by Iowa. State College of Agriculture and Mechanic Arts (Ames). Engineering Experiment Station (page images at HathiTrust; US access only)
• The torsional effect of transverse bending loads on channel beams (University of Illinois, 1930), by Fred B. Seely, William Louis Schwalbe, and William James Putnam (page images at HathiTrust)
• Torus analysis (Knolls Atomic Power Laboratory, General Electric Company, 1954), by R. L. Mathews, G. Horvay, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Preliminary investigation of the structural influence of entry-entry intersections and inhomogeneous intial stress fields on repository disposal rooms (National Technical Information Service, 1983), by Marc C. Loken, RE/SPEC Inc, and Battelle Memorial Institute. Office of Nuclear Waste Isolation (page images at HathiTrust)
• Ice cap strains and some effects on engineering structures (U.S. Army Materiel Command, Cold Regions Research & Engineering Laboratory, 1967), by Malcolm Mellor and Sherwood C. Reed (page images at HathiTrust)
• Methods for determining in situ deformation of rock masses (Geotechnical Branch, Division of Research and Laboratory Services, Engineering and Research Center, U.S. Dept. of the Interior, Bureau of Reclamation ;, 1988), by Ronald W. Luehring and Engineering and Research Center (U.S.). Geotechnical Branch (page images at HathiTrust)
• The statics ratio for analysis of frames that deflect (The University, 1950), by Phil Moss Ferguson and Ardis H. White (page images at HathiTrust)
• Structural behavior analysis, Canyon Ferry Dam, 1951-1964 (U.S. Dept. of the Interior, Bureau of Reclamation, Division of Design, 1966), by Keith Jones, Louis H. Roehm, Missouri River Basin Project (U.S.), and Engineering and Research Center (U.S.). Division of Design (page images at HathiTrust)
• Wall panels : analysis and design criteria (U.S. Office of Policy Development and Research, Dept. of Housing and Urban Development, 1976), by K. M. Kripanarayanan, Mark Fintel, and United States. Dept. of Housing and Urban Development. Office of Policy Development and Research (page images at HathiTrust)
• Philosophy of structural response to normal and abnormal loads. (U.S. Office of Policy Development and Research, Dept. of Housing and Urban Development, 1976), by United States. Dept. of Housing and Urban Development. Office of Policy Development and Research (page images at HathiTrust)
• Stress-strain relations in snow under triaxial compression (Snow, Ice and Permafrost Research Establishment, Corps of Engineers, U.S. Army, 1955), by J. K. Landauer (page images at HathiTrust)
• Plane-strain distribution of stress in elastic media (Iowa State College of Agriculture and Mechanic Arts, 1941), by Dio Lewis Holl (page images at HathiTrust; US access only)
• Critical review and interpretation of the literature on plastic (inelastic) behavior of engineering metallic materials (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Montgomerie Christie Steele (page images at HathiTrust; US access only)
• The behavior of fillet welds when subjected to bending stresses ... ([New York, 1935), by Norman G. Schreiner and American Welding Society. Structural Steel Welding Research Committee (page images at HathiTrust; US access only)
• Some observations of the distribution of stress in the vicinity of a crack in the center of a plate (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, [1963], 1963), by L. R. Jackson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Continued observations on the distribution of stress in the vicinity of a crack in the center of a plate : supplement to DMIC memorandum 178 (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1964., 1964), by L. R. Jackson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Resistance of structural clay masonry to dynamic forces; a design manual for blast resistance. (Structural Clay Products Research Foundation, 1958), by Clarence B. Monk (page images at HathiTrust)
• The extremum principles of the mathematical theory of elasticity and their use in stress analysis. (University of Washington Press, 1951), by William Prager (page images at HathiTrust)
• Strength and deformability of rocks at low temperatures (Corps of Engineers, U.S. Army, Cold Regions Research and Engineering Laboratory, 1971), by Malcolm Mellor and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Airplane design (The author, 1943), by K. D. Wood (page images at HathiTrust)
• Trusses and arches analyzed and discussed by graphical methods (J. Wiley, 1891), by Charles E. Greene (page images at HathiTrust)
• Structural behavior measurements of tunnel liners, Spring Creek power conduit (United States Department of the Interior, Bureau of Reclamation, 1968), by George C. Rouse and United States. Bureau of Reclamation. Dams Branch (page images at HathiTrust)
• Bearing strength of wood at angle to the grain (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1956), by Forest Products Laboratory (U.S.), University of Wisconsin, and United States Forest Service (page images at HathiTrust)
• Druckverhältnisse in Silozellen, ein Beitrag zur Berechnung von Silos. (Ernst, 1920), by E. Lufft (page images at HathiTrust; US access only)
• Photoelastic analysis of three-dimensional stress systems using scattered light (Washington, 1938), by Royal Weller and J. K. Bussey (page images at HathiTrust; US access only)
• Increments of finite strain. (Westinghouse Research Laboratories, 1951), by Evan A. Davis (page images at HathiTrust)
• Pressure and thermal stresses at a pipe attachment to a sphere (Knolls Atomic Power Laboratory, General Electric Company, 1959), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Bending of circular plates under a variable symmetrical load (Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Bending of circular plates under a uniform load on a concentric circle (Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Correlation of creep-buckling tests with theory (National Advisory Committee for Aeronautics, 1956), by Sharad A. Patel and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effects of multiaxial stretching on crazing and other properties of transparant plastics (National Advisory Committee for Aeronautics, 1954), by Irvin Wolock, Desmond Ivan George, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Column strength of tubes elastically restrained against rotation at the ends (U.S. Govt. print. off.], 1938), by William R. Osgood (page images at HathiTrust)
• Photoelastic studies of crack propagation and crack arrest in polymers and 4340 steel (The Commission :, 1978), by George Rankin Irwin, J. W. Dally, J. Metcalf, W. L. Fourney, T. Kobayashi, University of Maryland at College Park. Department of Mechanical Engineering, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Puncture of shielded radioactive material shipping containers (Washington, D. C. : Division of Safeguards, Fuel Cycle, and Environmental Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1980., 1980), by R. Larder, D. Arthur, Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards, Lawrence Livermore Laboratory, United States. National Technical Information Service, and United States Government Printing Office (page images at HathiTrust)
• Experimental investigation of creep bending and buckling of thin circular cylindrical shells (National Advisory Committee for Aeronautics, 1957), by Burton Erickson and United States National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Brief study of the theory of stresses in non-parallel chords truss and truss with secondary web system (1927), by Steven Antonoff (page images at HathiTrust; US access only)
• Computation of the stresses & design of the Logan street viaduct, Lansing, Michigan (1928), by Collins E. Thornton (page images at HathiTrust; US access only)
• Strength of materials, a textbook covering the syllabuses of the B.Sc. (Eng.), A.M.I.C.E. and A.M.I. Mech. E. examinations in this subject (Sir I. Pitman & Sons, ltd., 1927), by Frederick Victor Warnock (page images at HathiTrust)
• Pilot study for definition of track component load environments (UMTA ;, 1981), by Thomas R. Stagliano, United States. Urban Mass Transportation Administration. Office of Rail and Construction Technology, and Kaman AviDyne (page images at HathiTrust)
• Tensile elastic properties of 18:8 chromium-nickel steel as affected by plastic deformation (National Advisory Committee for Aeronautics, 1940), by Dunlap J. McAdam, R. W. Mebs, and United States. National Bureau of Standards (page images at HathiTrust)
• Effect of service stresses on the properties of 25S aluminum alloy. (National Advisory Committee for Aeronautics, 1940), by J. A. Kies, G. Willard Quick, and United States. National Bureau of Standards (page images at HathiTrust)
• Bestemmelse of spændinger i plader ved anvendelse af differensligninger (I kommission hos G.E.C. Gad, 1920), by Niels Jørgen Nielsen (page images at HathiTrust)
• The influence of temperature and rate of strain on the properties of metals in torsion (University of Illinois, 1953), by Clyde E. Work and Thomas J. Dolan (page images at HathiTrust)
• Continuity in concrete building frames. (Portland Cement Association, 1951), by Chicago Portland Cement Association (page images at HathiTrust; US access only)
• Stresses in simple structures (McGraw-Hill Book Company, 1926), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust)
• Manual on experimental stress analysis. (Cambridge, Mass., 1959), by Society for Experimental Stress Analysis and Society for Experimental Stress Analysis. Educational Committee (page images at HathiTrust)
• Shelter design and strengthening-consolidating circular ... (H.M. Stationery Off., 1942), by Great Britain Ministry of Home Security (page images at HathiTrust)
• A photoelastic investigation of shear and bending stresses in centrally loaded simple beams (Pittsburgh, Pa., 1937), by Max Mark Frocht, Carnegie Institute of Technology, and Pennsylvania United States. Works Progress Administration (page images at HathiTrust; US access only)
• Stress diagrams in open or lattice girder work, in steel and iron, continuous girders, suspension bridges and rigid arches. (Gale & Polden, ltd., 1894), by W. H. Bidder (page images at HathiTrust)
• Elongation recorder (Watertown Arsenal [distributed by U.S. Dept. of Commerce, Office of Technical Services], 1955), by D. E. Driscoll, T. S. DeSisto, and Watertown Arsenal (Mass.) (page images at HathiTrust)
• A photoelastic study of the influence of non-singular stresses in fracture test specimens (Oak Ridge, Tennessee : Oak Ridge National Laboratory, 1981., 1981), by R. J. Sanford, G. R Irwin, R. Chona, W. L. Fourney, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, Oak Ridge National Laboratory, and College Park. Photomechanics Laboratory University of Maryland (page images at HathiTrust)
• Boussinesq's problem for a heated punch : I. Solution for a cylindrical punch, II. Solution for a conical punch (Washington, D.C. : United States Air Force, Office of Scientific Research, 1961., 1961), by Dick Leon George, Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• Some isoperimetric inequalities in the torsion problem for multiply-connected regions ([Washington, D.C.] : Air Force Office of Scientific Research, United States Air Force, 1961., 1961), by L. E. Payne, College Park. Institute for Fluid Dynamics and Applied Mathematics University of Maryland, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
• A Reciprocal theorem for linear electrostriction with some applications ([Washington, D.C.] : [Air Force Office of Scientific Research, United States Air Force], 1961., 1961), by R. J. Knops, College Park. Institute for Fluid Dynamics and Applied Mathematics University of Maryland, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
• Boussinesq's problem for a heated punch : I. General Theory (Washington D. C. : Mathematics Division, Office of Scientific Research, U.S. Air Force, 1960., 1960), by Dick Leon George, Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• A Class of solutions of the equations of thermoelastic equilibrium (Washington D. C. : Mathematics Division, Office of Scientific Research, U.S. Air Force, 1960., 1960), by Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• Stress in the vicinity of a crack in a thick elastic plate (Washington D. C. : Mathematics Division, Office of Scientific Research, U.S. Air Force, 1960., 1960), by Morton Lowengrub, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• An analysis of the split Hopkinson pressure bar (White Oak, Maryland : United States Naval Ordnance Laboratory, 1967., 1967), by James L. Rand and Md.) Naval Ordnance Laboratory (White Oak (page images at HathiTrust)
• Experimental study of plastic responses of pipe elbows (Oak Ridge, Tennessee : Oak Ridge National Laboratory, Engineering Technology Division, 1978., 1978), by W. L. Greenstreet, Oak Ridge National Laboratory. Engineering Technology Division, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, and United States. Department of Energy (page images at HathiTrust)
• Design criteria for Piping and Nozzles Program quarterly progress report for ... (Oak Ridge, Tennessee : Oak Ridge National Laboratory, Engineering Technology Division., in the 20th century), by Oak Ridge National Laboratory. Engineering Technology Division, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, United States. Energy Research and Development Administration, and Union Carbide Corporation (page images at HathiTrust)
• Predicted strain in austenitic stainless steels under transient stress ([Washington, DC?] : U.S. Nuclear Regulatory Commission, 1979., 1979), by J. P. Hammond, M. K. Booker, Vinod K. Sikka, Oak Ridge National Laboratory. Metals and Ceramics Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust)
• Effect of state of stress on the failure of metals at various temperatures (Wright-Patterson Air Force Base, Ohio, Wright Air Development Division, Air Research and Development Command, U.S. Air Force, 1961., 1961), by Samuel K. Clark, David R. Jenkins, R. M. Haythornthwaite, United States. Air Force. Air Research and Development Command, Wright Air Development Division, and United States. Wright Air Development Division (page images at HathiTrust)
• Fatigue prediction study (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962., 1962), by G. V. Deneff, United States. Air Force. Air Research and Development Command, Wright Air Development Division, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Stress distribution in a plate with a hole subjected to an axial load and creep (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by Joseph Marin, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust; US access only)
• On stress interaction in fatigue and cumulative damage rule : part II. 7075 aluminum alloy (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1960., 1956), by Alfred M. Freudenthal, Robert A. Heller, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Effect of static prestrain on the prot-fatigue properties of unnotched and notched materials at room ane elevated temperatures (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1958., 1959), by F. H. Vitovec, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Drang und Zwang : eine höhere Festigkeitslehre für Ingenieure (R. Oldenbourg, 1944), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust)
• An Elementary discussion of definitions of stress rate. (U.S. Dept. of Commerce ;, 1960), by William Prager (page images at HathiTrust)
• Strain aging and delayed failure in high-strength steels (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by E. A. Steigerwald, G. L. Hanna, United States. Air Force. Systems Command. Aeronautical Systems Division, and inc Thompson Ramo Wooldridge (page images at HathiTrust)
• A Koiter-type method for finite element analysis of nonlinear structural behavior. Volume 2, User's manual for program BEHAVE (Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1970), by Raphael T. Haftka, W. Nachbar, R. H. Mallett, San Diego University of California, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Investigation of stress-strain history modeling at stress risers : Phase 2 (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978., 1978), by James R. Carroll, R. F. Wilkinson, R. L. Brugh, Air Force Flight Dynamics Laboratory (U.S.), and Lockheed-Georgia Company (page images at HathiTrust)
• Fracture mechanics analysis of single and double rows of fastener holes loaded in bearing (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1976., 1976), by Oscar Orringer, George Stalk, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Elasto-plastic analysis of structures under load and two-dimensional temperature distributions. Volume 1, Analysis development and experimental program (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by P. C. Huang, R. J. Edwards, United States. Air Force. Systems Command. Aeronautical Systems Division, Air Force Flight Dynamics Laboratory (U.S.), and Martin Marietta Corporation. Baltimore Division (page images at HathiTrust)
• Fracture processes in germanium (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, 1963., 1963), by O. W. Johnson, P. Gibbs, N. Farb, United States. Air Force. Systems Command. Aeronautical Systems Division, and University of Utah (page images at HathiTrust)
• The effect of size and stress history on fatigue crack initiation and propagation (Wright-Patterson Air Force Base, Ohio : Directorate of Materials Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Waloddi Weibull and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials Processes (page images at HathiTrust)
• Acoustic emission under applied stress (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1964., 1964), by B. H. Schofield, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, Air Force Materials Laboratory (U.S.), and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• An automated procedure for the optimization of practical aerospace structures. Volume 1, Theoretical development and user's information (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamicsl Laboratory, Air Force Systems Command, United States Air Force, 1971., 1971), by Walter J. Dwyer, Irving U. Ojalvo, Robert K. Emerton, Air Force Flight Dynamics Laboratory (U.S.), United States. Air Force. Systems Command, and Grumman Aerospace Corporation (page images at HathiTrust)
• An application of linear hardening plasticity theory to cycle and path dependent strain accumulation (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by P. D. Schwiebert, G. J. Moyar, United States. Air Force. Systems Command. Aeronautical Systems Division, and University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• The investigation of the effects of loading rate and stress concentration factors on the notch properties of three sheet alloys at subzero temperatures (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by A. W. Brisbane and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• The effect of stress gradient and stress biaxiality on the behavior of materials (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Volker Weiss, Kushwant Grewal, John Sessler, United States. Air Force. Systems Command. Aeronautical Systems Division, and Syracuse University. Research Institute (page images at HathiTrust)
• Flexible plates and shells; a translation of [Gibkie plastinki i obolochki] (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by A. S. Volʹmir, Air Force Flight Dynamics Laboratory (U.S.), and University of Florida. Department of Engineering Sciences (page images at HathiTrust)
• The effect of random loading on creep deformation in a non-linear metal (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Maciej P. Bieniek, Columbia University, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• The cyclic state of materials and the relationship to mechanical properties and fatigue (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, XXXX1966., 1966), by Dewey G. Younger and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• A Study of the effect of superimposed stress concentrations and fracture of inhomogeneous brittle solids (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by Volker Weiss, G. Nash, A. Takimoto, Air Force Materials Laboratory (U.S.), and Syracuse University (page images at HathiTrust)
• FORMAT II : Second version of Fortran matrix abstraction technique : Volume 4 A User-coded matrix generator for the displacement method (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by J. E. Serpanos, Air Force Materials Laboratory (U.S.), and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• Studies of design criteria for welded structures subjected to a biaxial stress field (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processess, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Bruce L. Baird and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• MAGIC : n automated general purpose system for structural analysis. Volume 1, Engineer's manual (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1969., 1969), by Robert H. Mallett, Stephen Jordan, Air Force Flight Dynamics Laboratory (U.S.), and Bell Aerospace Textron (page images at HathiTrust)
• Allowable stresses for elevated temperature structures (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by C. G. Swanson, P. C. Huang, C. J. Van der Maas, United States. Air Force. Systems Command. Aeronautical Systems Division, Martin Marietta Corporation. Baltimore Division, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Acoustic emission under applied stress (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by B. H. Schofield, Air Force Materials Laboratory (U.S.), and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Analyses of elasto-plastic plates with cracks (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by J. L. Swedlow, W. Yang, M. L. Williams, Air Force Materials Laboratory (U+.S.), and California Institute of Technology (page images at HathiTrust)
• Large deflection and stability analysis of two-dimensional truss and frame structures (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by J. S. Przemieniecki, D. M. Purdy, Air Force Flight Dynamics Laboratory (U.S.), and Air Force Institute of Technology (U.S.) (page images at HathiTrust)
• Further investigation of notch sensitivity of refractory metals. (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1965., 1962), by Battelle Memorial Institute and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• The effect of stress concentration on the fracture and deformation characteristics of ceramics and metals (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Volker Weiss, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and Syracuse University (page images at HathiTrust)
• Influence of carbon content and substructure on cleavage in iron single crystals (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by D. A. Hay, B. L. Averbach, United States. Air Force. Systems Command. Aeronautical Systems Division, and Alloyd Electronics Corporation (page images at HathiTrust)
• Thermo-elastic equations for a sandwich panel under arbitrary temperature distribution, transverse load and edge compression (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by Ibrahim K. Ebcioglu, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
• Stress analysis of a fully inflated ribless guide surface parachute (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, 1965., 1965), by H. G. Heinrich, Lelan R. Jamison, Air Force Flight Dynamics Laboratory (U.S.), and University of Minnesota (page images at HathiTrust)
• Matrix analysis of shells : small and large displacements (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by J. H. Argyris, P. C. Patton, K. E. Buck, W. Bosshard, J. B. Spooner, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Elasto-plastic analysis of structures under load and two-dimensional temperature distributions. Volume 2, Summary of test data (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by P. C. Huang, R. J. Edwards, United States. Air Force. Systems Command. Aeronautical Systems Division, Air Force Flight Dynamics Laboratory (U.S.), and Martin Marietta Corporation. Baltimore Division (page images at HathiTrust)
• Evaluation of a biaxial test fixture : interim report for period April 1981-October 1982 (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1983., 1983), by James A. Holst, Air Force Flight Dynamics Laboratory (U.S.), and Air Force Wright Aeronautical Laboratories (page images at HathiTrust)
• Test methods for mechanical properties of anisotropic materials (Beryllium sheet) (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by Raymond W. Fenn, B. M. Lempriere, W. C. Kinder, D. D. Crooks, Air Force Materials Laboratory (U.S.), and Lockheed Missiles and Space Company (page images at HathiTrust)
• An application of the finite element method to elastic-plastic problems of plane stress (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1970., 1970), by M. Salmon, R. Sandhu, L. Berke, Air Force Flight Dynamics Laboratory (U.S.), and IIT Research Institute (page images at HathiTrust)
• MAGIC : an automated general purpose system for structural analysis. Volume 2, User's manual (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1969., 1969), by Stephen Jordan, Air Force Flight Dynamics Laboratory (U.S.), Bell Aerospace Textron, Robert H. Mallett, and Gene E. Maddux (page images at HathiTrust)
• On the effects of fiber orientation and nonhomogeneity on buckling and postbuckling equilibrium behavior of fiber-reinforced cylindrical shells under uniform axial compression (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by N. S. Khot and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Structural response of a shallow spherical shell (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1970., 1970), by James L. Rudd, Air Force Flight Dynamics Laboratory (U.S.), and United States. Air Force. Systems Command (page images at HathiTrust)
• Evaluation of sapphire wool and its incorporation into composites of high strength (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), by R. L. Mehan, A. Gatti, Earl Feingold, Air Force Materials Laboratory (U.S.), and General Electric Company. Space Sciences Laboratory (page images at HathiTrust)
• Stability of filament wound cylinders under combined loading (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by A. Holston, D. A. Stang, A. Feldman, Air Force Flight Dynamics Laboratory (U.S.), and Martin Marietta Denver Aerospace (page images at HathiTrust)
• Investigation of the distribution of tension in notched construction elements (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by H. Neuber, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and Technische Hochschule München (page images at HathiTrust)
• Young's modulus and breaking strength of body tissues (Wright-Patterson Air Force Base, Ohio : Aerospace Medical Research Laboratories, 1964., 1964), by John L. Nickerson, M. Drazic, Chicago Medical School, and Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume V. Engineering user and technical report (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1968., 1968), by John Pickard, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume 6. Description of digital computer program - Phase 1 (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by J. P. Cogan, J. R. Wells, J. E. Serpanos, R. C. Morris, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume VII. Description of digital computer program - Phase 3 (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by R. C. Morris, P. S. Yoon, J. R. Wells, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume 6 - Supplement 2. Description of digital computer program - Phase 1 - Extended (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1973., 1973), by R. C. Morris, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume 5, Supplement II. Engineering user and technical report-extended (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1973., 1973), by John Pickard, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company (page images at HathiTrust)
• Effect of state of stress on the failure of metals at various temperatures (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, 1962., 1962), by R. M. Haythornthwaite, David R. Jenkins, United States. Air Force. Systems Command, Aeronautical Systems Center (U.S.), and University of Michigan (page images at HathiTrust)
• FORMAT : Fortran matrix abstraction technique. Volume 7 - Supplement 1. Description of digital computer program - Phase 3 - Extended (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by J. A. Frank, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Douglas Aircraft Company. Aircraft Division (page images at HathiTrust)
• Piliers, murs immergés et barrages à sections horizontales également comprimées : formules pratiques (Goemaere, imprimeur du roi, 1923), by J. Duvigneaud (page images at HathiTrust)
• Mehrstielige rahmen; gebrauchsfertige formeln zur berechnung mehrfach statisch unbestimmter rahmenartiger stabsysteme, als hilfsmittel für den entwerfenden ingenieur und für den konstruktionstisch (W. Ernst & Sohn, 1924), by Adolf Kleinlogel (page images at HathiTrust)
• Stress analysis by the photoelastic method (University of California, 1934), by Rudolf G. Minarik (page images at HathiTrust)
• Buckling and post-buckling behavior of axially-compressed cylindrical shells subjected to internal pressure (Urbana : Illinois : University of Illinois, Department of Theoretical and Applied Mechanics, July, 1957., 1957), by H. L. Langhaar, University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics, and United States. Office of Naval Research. Department of Navy (page images at HathiTrust; US access only)
• Strain hysteresis, energy and fatigue fracture (Urbana : Illinois : University of Illinois, Department of Theoretical and Applied Mechanics, June 1959., 1959), by C. E. Feltner, General Electric Company, and University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics (page images at HathiTrust; US access only)
• Damping properties of viscoelastic materials under biaxial stress (Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, 1965), by Ahid D. Nashif, University of Dayton. Research Institute, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Structural evaluation of high strain fiber and resin composite material systems (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1986., 1986), by David L. Buchanan, Paul S. McClellan, Air Force Wright Aeronautical Laboratories, Air Force Flight Dynamics Laboratory (U.S.), and McDonnell Aircraft Company (page images at HathiTrust)
• Determination of the effects of elevated temperature materials properties of several high temperature alloys (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division. Air Force Systems Command, United States. Air Force, 1962., 1962), by M. M. Lemcoe, Alex. Jr Trevino, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, United States. Air Force. Systems Command. Aeronautical Systems Division, and Southwest Research Institute (page images at HathiTrust)
• Stress and strain distribution in the vicinity of interference fit fasteners (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1973., 1973), by Merle Allen, J. A. Ellis, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation. Convair Division (page images at HathiTrust)
• The Mechanical properties of Tantalum with special reference to the ductile-brittle transition : Part III (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by G. Abowitz, R. A. Burn, United States. Air Force. Systems Command. Aeronautical Systems Division, Air Force Materials Laboratory (U.S.), and Materials Research Corporation (page images at HathiTrust)
• Structural safety under conditions of ultimate load failure and fatigue (Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1962), by Alfred M. Freudenthal, Masanobu Shinozuka, and Columbia University (page images at HathiTrust)
• Beton und Eisen. (W. Ernst & Sohn., 1905) (page images at HathiTrust)
• A design approach to general structural integrity : prepared for U.S. Department of Housing and Urban Development, Office of Policy Development and Research : contract no. H-2131R (HUD, PDR : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1977), by Donald M. Schultz, Mark Fintel, Eric F. P. Burnett, and Center for Faith-Based and Community Initiatives (United States. Department of Labor). Office of Policy Development and Research (page images at HathiTrust)
• Transactions of the American Society of Civil Engineers, vol. LXXII, June, 1911 : Experiments on retaining walls and pressures on tunnels, by Wm. Cain (Gutenberg ebook)
• Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910: Expansion of Pipes, Paper No. 1167, by Ralph C. Taggart (Gutenberg ebook)

More items available under broader and related terms at left.