The Online Books Page

Ball mills -- Grinding media -- Corrosion

See also what's at your library, or elsewhere.

• Ball mills -- Grinding media
• Corrosion

• Corrosion rates of grinding media in mill water (U.S. Dept. of the Interior, Bureau of Mines, 1984), by W. K. Tolley, J. L. Huiatt, and I. L. Nichols (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• NASA TN D-4862 (National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 2215], 1968), by Alan Arias, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)

• Corrosion potential of NTA (Nitrilotriacetic Acid) in detergent formulations ([Environmental Protection Agency, Water Quality Office], 1971), by Peter J. Moreland, Garson A. Lutz, Walter K. Boyd, United States. Environmental Protection Agency. Water Quality Office, and Battelle Memorial Institute. Columbus Laboratories (page images at HathiTrust)
• Corrosion phenomenon of endodontic files : a colorimetric analysis : a thesis submitted in partial fulfillment ... endodontics (1973), by Richard Alan Rubinstein and University of Michigan. School of Dentistry (page images at HathiTrust)
• Economic impact of highway snow and ice control. Final report. (1977), by J. C. McBride, William J. Kennedy, J. H. Thuet, Michael C. Belangie, R. M. Stewart, C. C. Sy, and F. R. McConkie (page images at HathiTrust)
• Economic impact of highway snow and ice control. ESIC - user's manual. (1977), by J. C. McBride, William J. Kennedy, J. H. Thuet, Michael C. Belangie, R. D. Briggs, F. R. McConkie, and R. M. Stewart (page images at HathiTrust)
• Cathodic protection/partial coatings versus complete coatings in tanks. (1982) (page images at HathiTrust)
• An investigation of possible ways to enhance the deposition of calcite-type coatings. (1984) (page images at HathiTrust)
• A laboratory study investigating the feasibility of applying calcite-type coatings to segregated ballast tanks ([Avondale Shipyards, Inc.?], 1981), by George A. Gehring, John W. Peart, Avondale Shipyards, Ocean City Research Corporation, and National Shipbuilding Research Program (page images at HathiTrust)
• Solventless coating evaluation and test program for marine use. (1981) (page images at HathiTrust)
• Marine coatings performance for different ship areas. Volume I. (1979) (page images at HathiTrust)
• Evaluation of rust compatible primers for marine applications. (1984) (page images at HathiTrust)
• Powder coating for highway safety appurtenances. [Revised edition]. (1984), by N. E. Knight and Gary L. Hoffman (page images at HathiTrust)
• Northstar workshop on noncorrosive winter maintenance - technical presentations. (1983), by John Hale and 26-27 Oct 1983 Northstar Workshop on Noncorrosive Winter Maintenance (page images at HathiTrust)
• Cathodic protection/partial coatings versus complete coating in ballast tanks - a project update. (1985) (page images at HathiTrust)
• DDG-51 corrosion control. (1982), by D. Bergey (page images at HathiTrust)
• Powder coating for highway safety appurtenances. Final report. (1986), by N. E. Knight (page images at HathiTrust)
• Adaption of Japanese prefabrication priming procedure to U.S. shipbuilding methodology (National Shipbuilding Research Program, 1987), by William D. Corbett, Kenneth A. Trimber, Inc KTA-TATOR, and Calif.) National Steel and Shipbuilding Company (San Diego (page images at HathiTrust; US access only)
• Cathodic protection/partial coatings versus complete coating in ballast tanks - five year report. (1987) (page images at HathiTrust; US access only)
• Corrosion protection by calcite-type coatings. (1989) (page images at HathiTrust)
• Guidelines for preventing fire retardant corrosion (Intermountain Research Station, 1986), by George A. Gehring, C. W. George, and Intermountain Research Station (Ogden, Utah) (page images at HathiTrust)
• Study of the GCRE tube bundle failure (Aerojet-General Corporation, Aerojet-General Nucleonics, 1962), by Aerojet-General Corporation Aerojet-General Nucleonics (page images at HathiTrust)
• Three stage potassium vapor turbine test (National Aeronautics and Space Administration ;, 1971), by B. L. Moor, E. Schnetzer, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• Ion and laser microprobes applied to the measurement of corrosion-produced hydrogen on a microscopic scale (National Aeronautics and Space Administration, 1971), by Hugh R. Gray, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• It works while you sleep (s.n., 1907), by A. D. Colquhoun Boiler Cleanser Company (page images at HathiTrust; US access only)

• Critical surveys of data sources : corrosion of metals (U.S. Dept. of Commerce, National Bureau of Standards :, 1976), by Ronald B. Diegle, Walter K. Boyd, United States. National Bureau of Standards, and National Measurement Laboratory (U.S.). Office of Standard Reference Materials (page images at HathiTrust)

• Stress corrosion cracking control measures (U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1976), by B. F. Brown (page images at HathiTrust)
• A mechanical property and stress corrosion evaluation of VIM-ESR-VAR work strengthened and direct double aged Inconel 718 bar material (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1986), by J. W. Montano and George C. Marshall Space Flight Center (page images at HathiTrust)
• Hot-salt stress corrosion cracking of titanium alloys (National Aeronautics and Space Administration, 1971), by R. S. Ondrejcin, United States National Aeronautics and Space Administration, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stress corrosion cracking of titanium alloys at ambient temperature in aqueous solutions (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1969), by T. L. Mackay, McDonnell Douglas Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments (National Aeronautics and Space Administration ;, 1970), by J. D. Boyd, United States National Aeronautics and Space Administration, and Battelle Memorial Institute (page images at HathiTrust)
• The relative stress-corrosion cracking susceptibility of candidate aluminum-lithium alloys for aerospace applications (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1982), by Patrick P. Pizzo, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, Advanced Research and Applications Corporation, and Ames Research Center (page images at HathiTrust)
• NASA TN D-2011 (National Aeronautics and Space Administration, 1963), by David N. Braski, George J. Heimerl, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-2499 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1964), by David N. Braski, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6691 (National Aeronautics and Space Administration :, 1972), by Howard G. Nelson, Ames Research Center, Los Angeles University of California, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress corrosion cracking of austenitic stainless steel : status report, September 1, 1964 (E.I. Du Pont de Nemours & Company, Savannah River Laboratory, 1964), by McIntyre R. Louthan, U.S. Atomic Energy Commission, E.I. du Pont de Nemours & Company, and Savannah River Laboratory (page images at HathiTrust)
• Effect of sodium-potassium alloy on various materials at elevated temperatures (U.S. Atomic Energy Commission, Division of Technical Information ;, 1946), by LeRoy R. Kelman, U.S. Atomic Energy Commission, University of Chicago, and Argonne National Laboratory (page images at HathiTrust)
• Stress-corrosion cracking : a nontechnical introduction to the problem (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by Warren E. Berry and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Environmental and metallurgical factors of stress-corrosion cracking in high-strength steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by C. J. Slunder, Walter K. Boyd, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Stress-corrosion cracking of aluminum alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by F. H. Haynie, Walter K. Boyd, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Stress-corrosion cracking and hydrogen-stress cracking of high-strength steel (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by E. E. Fletcher, A. R. Elsea, Warren E. Berry, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Stress corrosion and pyrophoric behavior of titanium and titanium alloys (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by D. W. Stough and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• A survey of factors which influence stress corrosion crack initiation in several uranium base alloys (Albuquerque, New Mexico : Sandia Laboratories, 1970., 1970), by L. L. Stephenson, U.S. Atomic Energy Commission, and Sandia Corporation (page images at HathiTrust)
• Eddy current round robin test on laboratory produced intergranular stress corrosion cracked inconel steam generator tubes (Washington, D.C. : U.S. Nuclear Regulatory Commission, 1984., 1984), by R. L. Bickford, C. A. LoPresti, H. E. Kjarma, P. G. Doctor, R. A. Clark, Pacific Northwest Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Examination of failed studs from no. 2 steam generator at the Maine Yankee Nuclear Power Station (Washington, D. C. : U.S. Nuclear Regulatory Commission, 1983., 1983), by C. Czajkowski, Brookhaven National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering (page images at HathiTrust)
• Mechanistic aspects of stress-corrosion cracking of type 304 stainless steel in LWR systems (Washington, D. C. : U.S. Nuclear Regulatory Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission, 1983., 1983), by F. A. Nichols, Argonne National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch (page images at HathiTrust)
• Environmentally assisted cracking in light water reactors : annual report, October 1981-September 1982 (Washington, D. C. : Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission, June 1983., 1983), by W. J. Shack, F. A. Nichols, W. E. Ruther, P. S. Maiya, J. Y. Park, T. N. Claytor, D. S. Kupperman, T. F. Kassner, Argonne National Laboratory, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Constant extension rate testing of SA302 Grade B Material in Neutral and chloride solutions (Washington, D.C. : Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1984., 1984), by C. Czajkowski, Brookhaven National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering (page images at HathiTrust)
• Environmentally assisted cracking in light water reactors : annual report, October 1982-September 1983 (Washington, D.C. : Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, June 1984., 1984), by W. J. Shack, W. E. Ruther, J. Y. Park, F. A. Nichols, P. S. Maiya, T. N. Claytor, D. S. Kupperman, T. F. Kassner, Argonne National Laboratory, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Investigation of the sulfur and lithium to sulfur ratio threshold in stress corrosion cracking of sensitized alloy 600 in borated thiosulfate solution (Washington, D.C. : Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1984., 1984), by R. Bandy, K. Kelly, Brookhaven National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering (page images at HathiTrust)

• Erosion/corrosion of turbine airfoil materials in the high-velocity effluent of a pressurized fulidized coal combustor (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Glenn R. Zellers, Carl E. Lowell, Anne P. Rowe, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)

More items available under broader and related terms at left.