The Online Books Page

Ball-bearings -- Testing

See also what's at your library, or elsewhere.

• Ball-bearings
• Bearings (Machinery) -- Testing
• Testing

• Ball-bearings -- Testing -- Data processing
• Ball-bearings -- Testing -- Equipment and supplies
• Steel ball bearings -- Testing
• Ball-bearings -- Corrosion -- Testing
• Ball-bearings -- Materials -- Testing

• Operating characteristics of a high-speed, jet-lubricated 35-millimeter-bore ball bearing with a single-outer-land guided cage (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1980), by Fredrick T. Schuller, Hans R. Signer, Stanley I. Pinel, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Bearing endurance tests in vacuum for sputtered molybdenum disulfide films (National Aeronautics and Space Administration ;, 1975), by Talivaldis Spalvins and Lewis Research Center (page images at HathiTrust)
• Stresses in a webbed ball (National Aeronautics and Space Administration ;, 1975), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Experimental evaluation of stresses in spherically hollow balls (National Aeronautics and Space Administration ;, 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Experimental evaluation of stresses in cylindrically hollow (drilled) balls (National Aeronautics and Space Administration ;, 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Evaluation of drilled-ball bearings at DN values to three million (National Aeronautics and Space Administration ;, 1972), by P. W. Holmes, Lewis Research Center, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• Performance of 75-millimeter-bore bearings using electron-beam-welded hollow balls with a diameter ratio of 1.26 (National Aeronautics and Space Administration ;, 1975), by Harold H. Coe, Herbert W. Scibbe, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)
• Effect of speed and load on ultra-high-speed ball bearings (National Aeronautics and Space Administration ;, 1975), by Eric N. Bamberger, Hans R. Signer, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Surface failure of titanium carbide cermet and silicon carbide balls in rolling contact at temperatures to 2000 ̊F (National Aeronautics and Space Administration :, 1965), by Richard J. Parker, Erwin V. Zaretsky, Salvatore J. Grisaffe, and Lewis Research Center (page images at HathiTrust)
• Operating characteristics of 120-millimeter-bore ball bearings at 3x10⁶ DN (National Aeronautics and Space Administration ;, 1974), by Erwin V. Zaretsky, Hans R. Signer, and Eric N. Bamberger (page images at HathiTrust)
• Rolling-element fatigue lives of AISI T-1, AISI M-42, AISI 52100, and Halmo at 150 ̊F (National Aeronautics and Space Administration ;, 1971), by Richard J. Parker, Marshall W. Dietrich, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN (National Aeronautics and Space Administration ;, 1976), by Harold H. Coe and Lewis Research Center (page images at HathiTrust)
• Instrument bearing performance in space and laboratory vacuum (National Aeronautics and Space Administration; [for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va.], 1970), by E. J. Devine, William A. Leasure, and Harold E. Evans (page images at HathiTrust; US access only)
• NASA TN D-5800 (National Aeronautics and Space Administration :, 1970), by Harold H. Coe, Richard J. Parker, Herbert W. Scibbe, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Fatigue lives at 600 ̊F of 120-millimeter-bore ball bearings of AISI M-50, AISI M-1, and WB-49 steels (National Aeronautics and Space Administration ;, 1971), by Eric N. Bamberger, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Flexural fatigue of hollow rolling elements (National Aeronautics and Space Administration ;, 1976), by Eric N. Bamberger, Marshall W. Dietrich, Richard J. Parker, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Rolling-element fatigue life of ausformed M-50 steel balls (National Aeronautics and Space Administration ;, 1968), by Richard J. Parker, Erwin V. Zaretsky, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Comparison of experimental and predicted performance of 150-millimeter-bore solid and drilled ball bearings to 3 million DN (National Aeronautics and Space Administration ;, 1974), by Herbert W. Scibbe, Harold E. Munson, and Lewis Research Center (page images at HathiTrust)
• Speed effects on ball spinning torque (National Aeronautics and Space Administration ;, 1969), by Dennis P. Townsend, Erwin V. Zaretsky, Marshall W. Dietrich, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6653 (National Aeronautics and Space Administration :, 1972), by Donald W. Wisander, Herbert W. Scibbe, David E. Brewe, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of hardness and other mechanical properties on rolling-contact fatigue life of four high-temperature bearing steels (National Aeronautics and Space Administration, 1960), by Thomas L. Carter, William J. Anderson, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• Rolling-element bearing life from 400 ̊to 600 ̊F (National Aeronautics and Space Administration ;, 1969), by Erwin V. Zaretsky, William J. Anderson, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Performance of 40-millimeter-bore ball bearings with lead- and lead-alloy-plated retainers in liquid hydrogen at 1.2 Million DN (National Aeronautics and Space Administration ;, 1972), by David E. Brewe, Herbert W. Scibbe, Donald W. Wisander, and Lewis Research Center (page images at HathiTrust)
• Experimental evaluation of the series-hybrid rolling-element bearing (National Aeronautics and Space Administration ;, 1970), by Richard J. Parker and Lewis Research Center (page images at HathiTrust)
• NASA TN D-4669 (National Aeronautics and Space Administration ;, 1968), by Marshall W. Dietrich, Erwin V. Zaretsky, Richard J. Parker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Predicted and experimental performance of jet-lubricated 120-millimeter-bore ball bearings operating to 2.5 million DN (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Harold H. Coe, Erwin V. Zaretsky, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)

• Apparatus for studying ball spinning friction (National Aeronautics and Space Administration ;, 1965), by Steven T. Miller, Erwin V. Zaretsky, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)

• Bearing life and failure distribution as affected by actual component differential hardness (National Aeronautics and Space Administration ;, 1965), by Erwin V. Zaretsky and Lewis Research Center (page images at HathiTrust)

• The torque and wear charactersitics of water-lubricated ball bearings (Battelle Memorial Institute, 1957), by William H. Goldthwaite, C. Malcolm Allen, David W. Knoll, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)

• Rolling-element fatigue life of silicon nitride balls (National Aeronautics and Space Administration ;, 1974), by Richard J. Parker, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)

• Reduced-pressure environment effects on rolling-element fatigue life with super-refined mineral oil lubricant (National Aeronautics and Space Administration ;, 1968), by David W. Reichard, Erwin V. Zaretsky, Richard J. Parker, and Lewis Research Center (page images at HathiTrust)
• Friction torque of ball bearings in vacuum with seven polytetrafluoroethylene-composition retainer materials (National Aeronautics and Space Administration ;, 1968), by Herbert W. Scibbe, William J. Anderson, Dean C. Glenn, and Lewis Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Die kugellagerungen, ihre konstruktion und ihre anwendung für en motorwagen- und maschinnubau (M. Krayn, 1908), by August Bauschlicher (page images at HathiTrust; US access only)
• Die wälzlager, kugel- und rollenlager, unter mitwirkung des herausgebers bearbeitet (J. Springer, 1925), by Hans Behr, Werner Ahrens, and Max Gohlke (page images at HathiTrust; US access only)
• Ball bearings (Printed by Beck engraving co., 1915), by B. D. Gray, H. Wickland, and Electric Vehicle Association of the Americas (page images at HathiTrust)
• Ball bearings (The American society of mechanical engineers, 1907), by Henry Hess (page images at HathiTrust)
• Anti-friction bearings (Published by Hudson T. Morton, president of Morton Bearing Co., 1954), by Hudson T. Morton (page images at HathiTrust)
• Engineering and design, a reference book on the application of anti-friction bearings. (SKF industries, inc., 1924), by inc SKF Industries (page images at HathiTrust)
• The tale of the tremendous trifle. (New departure division of General motors, 1944), by General Motors Corporation. New Departure Division (page images at HathiTrust)
• New departure hand book ... (New departure, 1933), by General motors sales corporation. New departure division (page images at HathiTrust)
• Kugel- und rollenlager; theorie, berechnung und praktische beispiele derselben (Polytechnische buchhandlung A. Seydel, 1900), by Max R. Zechlin (page images at HathiTrust; US access only)
• Hoover Steel Ball Co., Ann Arbor, Michigan : manufacturers of B-A-L-L-S, steel, bronze, brass copper, aluminum and other materials in both high and commercial grades. (The Company?, 1917), by Mich.) Hoover Steel Ball Company (Ann Arbor (page images at HathiTrust)
• The evolution of the steel ball industry. (Ann Arbor, Mich., 1917), by Ann Arbor Hoover Steel Ball Co. (page images at HathiTrust)
• Standards for ball and roller bearings and steel balls. (The Association, 1950), by Anti-Friction Bearing Manufacturers Association (page images at HathiTrust)
• Why anti-friction bearings. A discussion of the fundamental reasons responsible for the vastly increased use of modern rolling bearings, customarily referred to as anti-friction bearings. (New departure, division General motors sales corporation, 1940), by General motors sales corporation. New departure division (page images at HathiTrust)
• Ball bearings, mounted or unmounted, and parts thereof, from Argentina, Austria, Brazil, Canada, Hong Kong, Hungary, Mexico, the People's Republic of China, Poland, the Republic of Korea, Spain, Taiwan, Turkey and Yugoslavia : determination of the Commission in investigation no. 701-TA-307 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation : determinations of the Commission in investigations nos. 731-TA-498-511 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (U.S. International Trade Commission, 1991), by United States International Trade Commission (page images at HathiTrust)
• Ball bearings. (The Industrial press, 1910), by Asher Golden and Henry Hess (page images at HathiTrust; US access only)
• Endurance tests of rolling contact bearings of conventional and high temperature steels under conditions simulating aircraft gas turbine applications (Wright Air Development Center, Air Research and Development Command, U. S. Air Force, 1959), by H. O. Walp, J. V. Porter, and R. P. Remorenko (page images at HathiTrust)
• Friction and carrying capacity of ball and roller bearings (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by Herbert Lucius Whittemore, Serge Nicolas Petrenko, and United States. National Bureau of Standards (page images at HathiTrust)
• Miniature ball bearings. (Keene, N. H., 1955), by Inc Miniature Precision Bearings (page images at HathiTrust)
• Competitive assessment of the U.S. ball and roller bearing industry : report on investigation no. 332-211 under section 332(b) of the Tariff Act of 1930. (U.S. International Trade Commission, 1986), by United States International Trade Commission (page images at HathiTrust)
• Antifriction balls and ball bearings, including ball bearings with integral shafts, and parts thereof : report to the President on investigation no. TEA-I-27 under section 301(b)(1) of the Trade Expansion Act of 1962. (United States Tariff Commission, 1973), by United States Tariff Commission (page images at HathiTrust; US access only)
• Comparison of predicted and experimental thermal performance of angular-contact ball bearings (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Richard J. Parker and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Comparison of predicted and measured elastohydrodynamic film thickness in a 20-millimeter-bore ball bearing (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1979), by John J. Coy, Dennis P. Townsend, Rama S. R. Gorla, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Lewis Research Center, and Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Correlation of asperity contact-time fraction with elastohydrodynamic film thickness in a 20-millimetr-bore ball bearing (National Aeronautics and Space Administration :, 1979), by John J. Coy, Propulsion Laboratory (U.S.), and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Fredrick T. Schuller, Hans R. Signer, Stanley I. Pinel, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Lubrication of optimized-design tapered-roller bearings to 2.4 million DN (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), by Richard J. Parker, Hans R. Signer, Stanley I. Pinel, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Some effects of composition on friction and wear of graphite-fiber-reinforced polyimide liners in plain sphericl bearings (National Aeronautis and Space Administration, Scientific and Technical Information Office ;, 1978), by Harold E. Sliney, Thomas P. Jacobson, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Effect of carbide distribution on rolling-element fatigue life of AMS 5749 (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Richard J. Parker, Eric N. Bamberger, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Rolling-element fatigue life of AMS 5900 balls (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Richard J. Parker, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Antifriction bearings, excluding ball bearings with integral shafts, and parts thereof : the Green Ball Bearing Co., Cleveland, Ohio. (The Commission, 1974), by United States Tariff Commission and Green Ball Bearing Co (page images at HathiTrust)
• Evaluation of a series hybrid thrust bearing at DN values to three million. (National Aeronautics and Space Administration ;, 1974), by A. Gu, L. W. Winn, M. Eusepi, Lewis Research Center, and Mechanical Technology Incorporated (page images at HathiTrust)
• Development of a high speed parallel hybrid boost bearing (National Aeronautics and Space Administration ;, 1973), by L. W. Winn, M. Eusepi, Lewis Research Center, and Mechanical Technology Incorporated (page images at HathiTrust)
• Ball to separator contact forces in angular contact ball bearings under thrust and radial loads (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Lester J. Nypan, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• NASA TN D-1994 (National Aeronautics and Space Administration, 1963), by Dean C. Glenn, William J. Anderson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Correlation of elastohydrodynamic film thickness measurements for fluorocarbon, type II ester, and polyphenyl ether lubricants (National Aeronautics and Space Administration ;, 1974), by Stuart H. Loewenthal, Erwin V. Zaretsky, Richard J. Parker, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Predicted characteristics of an optimized series-hybrid conical hydrostatic ball bearing (National Aeronautics and Space Administration, 1971), by Lester J. Nypan, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Die Kugellager und ihre Verwendung im Maschinenbau. (J. Springer, 1913), by Werner Ahrens (page images at HathiTrust; US access only)
• Preliminary metallographic studies of ball fatigue under rolling-contact conditions (National Advisory Committee for Aeronautics, 1957), by H. Robert Bear, Robert H. Butler, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• New Departure handbook. (Bristol, Conn., 1942), by General Motors Corporation. New Departure Division (page images at HathiTrust; US access only)
• New departure handbook : a general reference book, containing useful tables, data and formulae together with essential information pertinent to the selection, application and lubrication of ballbearings, for the use of engineers and machine designers. (The Engineering department of the New departure manufacturing company, 1932), by New Departure Mfg. Co (page images at HathiTrust; US access only)
• Export of ball bearing machines to Russia. Hearings before the Subcommittee to Investigate the Administration of the Internal Security Act and other Internal Security Laws of the Committee on the Judiciary, United States Senate, Eighty-seventh Congress, first session, proposed shipment of miniature ball bearing machines to Russia. (U. S. Govt. Print. Off., 1961), by United States Senate Committee on the Judiciary (page images at HathiTrust)
• New departure hand book. (New Departure, 1940), by General Motors Corporation. New Departure Division (page images at HathiTrust; US access only)
• High temperature tests of standard needle bearings (Schenectady, New York : General Electric Company, Knolls Atomic Power Laboratory, Engineering Development Laboratory, 1952., 1952), by A. W. Bedford, D. B. Vail, Knolls Atomic Power Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Handbook : maintenance of aeronautical antifriction bearings (Washington, D.C. : Government Printing Office, 1965., 1965), by United States Bureau of Naval Weapons (page images at HathiTrust)
• Handbook on ball and roller bearings; a practical reference book on the design, application, and maintenance of ball and roller bearings (Sir I. Pitman & Sons, Ltd., 1924), by A. W. Macaulay (page images at HathiTrust; US access only)

More items available under broader and related terms at left.