The Online Books Page

Ceramic materials -- Thermal properties

See also what's at your library, or elsewhere.

• Ceramic materials
• Mines and mineral resources -- Thermal properties
• Ceramics -- Thermal properties
• Thermal properties

• Ceramic metals -- Thermal properties
• Glazes -- Thermal properties

• High-temperature corrosion resistance of ceramic materials (U.S. Dept. of the Interior, Bureau of Mines, 1981), by T. A. Clancy (page images at HathiTrust)
• Effect of shape and material on the thermal rupture of ceramics (U.S. Atomic Energy Commission, Technical Information Service, 1953), by Eugene Michael Baroody, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• High-temperature corrosion resistance of ceramic materials (U.S. Dept. of the Interior, Bureau of Mines ;, 1981), by T. A. Clancy (page images at HathiTrust)
• Correlation of physical properties of ceramic materials with resistance to fracture by thermal shock (National Advisory Committee for Aeronautics, 1949), by W. G. Lidman, A. R. Bobrowsky, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• Correlation of physical properties of ceramic materials with resistance to fracture by thermal shock (National Advisory Committee for Aeronautics, 1949), by W. G. Lidman, A. R. Bobrowsky, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)

• Establishing allowable temperature gradients for tungsten-uranium dioxide fuel elements using experimental cyclic strain data (National Aeronautics and Space Administration ;, 1968), by Ivan B. Fiero and Lewis Research Center (page images at HathiTrust)
• Final report on development of metal-ceramic compositions suitable for service at elevated temperatures (Oak Ridge, Tennessee : Fairchild Engine and Airplane Corporation, 1951., 1951), by W. D. Kingery, M. Berg, M. Humenik, G. Economos, Fairchild Engine and Airplane Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Thermal expansion coefficient mismatch and resultant thermal stress development in porcelain fused to metal specimens : a thesis submitted in partial fulfillment ... restorative dentistry ... (1981), by Terry R. Walton and University of Michigan. School of Dentistry (page images at HathiTrust)

• The thermal study of porcelain glazes (1911), by Francis William Walker (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• Introduction to physical ceramics; an intensive course for engineers and scientists. ([Ann Arbor], 1962), by University of Michigan. (1962) (page images at HathiTrust)
• Mechanical properties of engineering ceramics : proceedings of a conference conducted by the School of Engineering and the College Extension Division, North Carolina State College, in cooperation with the Office of Ordnance Research, U.S. Army (Interscience Publishers, 1961), by Conference on the Mechanical Properties of Engineering Ceramics (1960 : North Carolina State College), Hayne Palmour, and William Wurth Kriegel (page images at HathiTrust)
• alloys based on high-melting compounds ([Wright-Patterson Air Force Base, Ohio, Foreign Technology Division, Air Force Systems Command], 1962), by G. V. Samsonov and K. L. Portnoĭ (page images at HathiTrust; US access only)
• Properties of high-temperature ceramics and cermets : elasticity and density at room temperature (U.S. Dept. of Commerce, National Bureau of Standards :, 1960), by Stewart M. Lang and United States. National Bureau of Standards (page images at HathiTrust)
• Procedures for precise determination of thermal radiation properties, November 1964 to October 1965 (For sale by the Supt. of Docs., U.S. Govt. Print. Off, 1967), by United States. National Bureau of Standards, Joseph C. Richmond, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Advanced materials by design : [summary]. (Congress of the U.S., Office of Technology Assessment, 1988), by United States Congress Office of Technology Assessment (page images at HathiTrust)
• Mechanical and thermal properties of ceramics : proceedings (U.S. Dept. of Commerce, National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1969), by Md.) Symposium on Mechanical and Thermal Properties of Ceramics (1968 : Gaithersburg, J. B. Wachtman, United States. National Bureau of Standards, American Society for Testing and Materials, and American Ceramic Society (page images at HathiTrust)
• SMAW ceramic weld backing evaluation : final report ([Offshore Power Systems?], 1982), by R. E. Cantrell, S. B. Hollwarth, D. J. St. Pierre, Newport News Shipbuilding and Dry Dock Company, United States Maritime Administration, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Ceramic weld backing evaluation. Final report. (1980), by R. E. Cantrell and D. J. St. Pierre (page images at HathiTrust; US access only)
• Ceramic applications in turbine engines. (1984), by Harold E. Helms, P. W. Heitman, L. C. Lindgren, and S. R. Thrasher (page images at HathiTrust)
• Transformation toughened ceramics for the Heavy Duty Diesel Engine Technology Program. (1984), by Solomon Musikant, E. Feingold, H. Rauch, and S. Samanta (page images at HathiTrust)
• Attack on materials by lead at 1000 C (Argonne National Laboratory, Metallurgy Division, 1955), by W. D. Wilkinson, H. V. Rhude, E. W. Hoyt, and Argonne National Laboratory (page images at HathiTrust)
• Ceramic mold inserts for use in ferrous diecasting (U.S. Dept. of the Interior, Bureau of Mines, 1981), by E. G. Davis and G. V. Sullivan (page images at HathiTrust)
• A textbook for ceramic engineers. (Alfred University, 1954), by George Alderson Kirkendale (page images at HathiTrust)
• Bulletin (The University, 1907), by University of Illinois (Urbana-Champaign campus). Department of Ceramics (page images at HathiTrust)
• Les industries céramiquies : terres cuites, tuiles, briques, faiences, grés et porcelaines (Librairie J.-B. Bailliére et fils, 1901), by E. S. Auscher and Ch Quillard (page images at HathiTrust; US access only)
• Ceramic tribology : methodology and mechanisms of alumina wear (U.S. Dept. of Commerce, National Institute of Standards and Technology ;, 1988), by Richard S. Gates, E. Erwin Klaus, S. M. Hsu, and National Institute of Standards and Technology (U.S.) (page images at HathiTrust)
• Factors affecting thermal shock resistance of polyphase ceramic bodies (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1961), by Carborundum Company, A. Z. Chaberski, D. P. H. Hasselman, and P. T. B. Shaffer (page images at HathiTrust)
• Investigation of theoretical and practical aspects of the thermal expansion of ceramic materials; final report (Buffalo, 1962), by Cornell Aeronautical Laboratory and Henry Paul Kirchner (page images at HathiTrust; US access only)
• The chemistry & physics of clays and other ceramic materials (Van Nostrand, 1924), by Alfred B. Searle (page images at HathiTrust)
• Application of the interferometer to measurements of the thermal dilatation of ceramic materials (U.S. Dept. of Commerce, Bureau of Standards :, 1924), by George Ernest Merritt and United States. National Bureau of Standards (page images at HathiTrust)
• Design, installation, and use of porous ceramic samplers for monitoring soil-water quality (U.S. Dept. of Agriculture, Agricultural Research Service, 1977), by Dennis R. Linden and University of Minnesota. Agricultural Experiment Station (page images at HathiTrust)
• NASA TN D-5851 (National Aeronautics and Space Administration :, 1970), by T. M. Heslin, Alfred G. Eubanks, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Correlation of physical properties of ceramic materials with resistance to fracture by thermal shock (National Advisory Committee for Aeronautics, 1949), by W. G. Lidman, A. R. Bobrowsky, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• Investigation of a gas turbine with National Bureau of Standards body 4811 ceramic rotor blades (National Advisory Committee for Aeronautics, 1948), by John C. Freche, Bob W. Sheflin, United States National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
• The compatibility of gas coolants and ceramic materials in coated-particle nuclear fuels (Battelle Memorial Institute ;, 1961), by A. Levy, John F. Foster, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Oxidation of titanium carbide base ceramals containing molybdenum, tungsten, and cobalt (National Advisory Committee for Aeronautics, 1949), by M. J. Whitman, A. J. Repko, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Elevated-temperature properties of several titanium carbide base ceramals (National Advisory Committee for Aeronautics, 1949), by George C. Deutsch, William G. Lidman, Andrew J. Repko, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Correlation of physical properties of ceramic materials with resistance to fracture by thermal shock (National Advisory Committee for Aeronautics, 1949), by W. G. Lidman, A. R. Bobrowsky, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Investigation of bonding between metals and ceramics. [Part] 1, Nickel, cobalt, iron or chromium with boron carbide (National Advisory Committee for Aeronautics, 1949), by H. J. Hamjian, W. G. Lidman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An evaluation of heating methods for thermal-rupture tests of ceramic fuel elements (Battelle Memorial Institute, 1950), by F. C. Todd, H. Z. Schofield, W. H. Duckworth, S. L. Fawcett, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Induction heated vacuum hot press (Vallecitos Atomic Laboratory, 1960), by E. W. Hoyt, U.S. Atomic Energy Commission, Vallecitos Atomic Laboratory, and General Electric Company (page images at HathiTrust)
• Das Trocknen mit Luft und Dampf (s.n., 1900), by E. Hausbrand (page images at HathiTrust; US access only)
• Grondonderzoek en keramiek (s. n.], 1920), by E. C. Jul. Mohr (page images at HathiTrust; US access only)
• Ultrasonic hot pressing of metals and ceramics (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1961., 1961), by William B. Tarpley, Herbert Kartluke, U.S. Atomic Energy Commission. New York Operations Office, and Aeroprojects Incorporated (page images at HathiTrust)
• The development of large beta radiation sources and their applications (Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, 1963., 1963), by Jacques J. Weinstock, P. Murali Krishna, Yael Miron, U.S. Atomic Energy Commission, and Radiation Applications Incorporated (page images at HathiTrust)
• Industrial arts: resource book on ceramic materials (Vocational Division, Curriculum Laboratory, 1961), by New Jersey. Division of Vocational Education and Gus V. Pascale (page images at HathiTrust; US access only)
• Investigations in ceramics and road materials (Dept. of Mines, Mines Branch, 1923), by Canada. Mines Branch (page images at HathiTrust)
• Rocket refractories. (U.S. Naval Ordnance Test Station, 1955), by Harry B. Porter, United States. Dept. of Commerce. Office of Technical Services, and Calif.). Propellants and Explosives Dept Naval Ordnance Test Station (Inyokern (page images at HathiTrust; US access only)
• Refractory ceramics of interest in aerospace structural applications - a materials selection handbook. (AF Materials Laboratory, Research and Technology Division., Air Force Systems Command, 1963), by Battelle Memorial Institute, J. R. Hague, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Ceramic foam and ceramic honeycomb : a literature survey (Defense Technical Information Center :, 1962), by Defense Technical Information Center (U.S.) and North American Aviation. Space and Information Systems Division (page images at HathiTrust; US access only)
• The investigation of microstructure in structural ceramics (Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, 1965), by Harris Merl Burte and L. A. Jacobson (page images at HathiTrust)
• Reactions of a prototype nuclear waste ceramic with a hot magnesium-rich brine : technical report (Office of Nuclear Waste Isolation, Battelle Project Management Division ;, 1982), by Sridhar Komarneni, William B. White, Gregory J. McCarthy, W. Phelps Freeborn, Barry E. Scheetz, Pennsylvania State University, Battelle Memorial Institute. Office of Nuclear Waste Isolation, and United States. Department of Energy (page images at HathiTrust)
• The architectural engineering features of the Geneva panel house demonstrating the first field erection of the "SCR building panel" (Structural Clay Products Research Foundation, 1958), by C. B. Monk and Structural Clay Products Research Foundation (page images at HathiTrust; US access only)
• Studies of the brittle behavior of ceramic materials. [Part I] (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Proceseses, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Nicholas A. Weil, United States. Air Force. Systems Command. Aeronautical Systems Division, and Armour Research Foundation (U.S.) (page images at HathiTrust)
• Dynamic yield strengths of light armor materials (Berkeley, California : University of California, Lawrence Radiation Laboratory, 1970., 1970), by W. H. Gust, E. B. Royce, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Fabrication of spiked-core fuel elements for the experimental boiling water reactor. Final Report (Argonne, Ill. : Argonne National Laboratory, 1965., 1965), by W. C. Kramer, R. A. Noland, C. H. Bean, R. A. Beatty, F. D. McCuaig, U.S. Atomic Energy Commission, and Argonne National Laboratory (page images at HathiTrust)
• Ceramic materials for nuclear thermionic converters (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1963., 1963), by Robert E. Cowan, R. J. LaBauve, Stephen D. Stoddard, Los Alamos Scientific Laboratory, and Pennsylvania) American Ceramic Society. Meeting 1963 : Pittsburgh (page images at HathiTrust)
• Behavior of brittle-state materials (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1955., 1955), by Omar K. Salmassy, A. D. Schwope, Winston H. Duckworth, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Battelle Memorial Institute (page images at HathiTrust)
• Prestressed ceramic structures (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1954., 1954), by F. R. Shanley, J. S. Mizushima, R. D. Chipman, R. B. Simonson, R. D. Johnston, F. A. Needham, J. F. Brahtz, W. J. Knapp, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Los Angeles University of California (page images at HathiTrust)
• A study of the behavior of ceramic materials in a corrosive superheated boron oxide-boron environment (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957., 1957), by Harry Frank Rizzo, M. A. Schwartz, B. C. Weber, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Factors controlling resistance to deformation and mechanical failure in polycrystalline (glass-free) ceramics (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1957., 1957), by J. B. Wachtman, Laurel H. Maxwell, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and United States. Bureau of Standards (page images at HathiTrust)
• Ceramic studies summary technical report (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by P. Gibbs, Wright Air Development Center, United States. Air Force. Air Research and Development Command, and University of Utah (page images at HathiTrust)
• State-of-the-art review on ferroelectric ceramic materials (Wright-Patterson Air Force Base, Ohio : Air Force Material Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by R. M. Gruver, C. W. Dickey, W. R. Buessem, Air Force Materials Laboratory (U.S.), United States. Air Force. Systems Command, and Pennsylvania State College (page images at HathiTrust)
• Influence of surface on ceramic mechanical properties (Wright-Patterson Air Force Base, Ohiio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by George R. Pulliam, Wright Air Development Center, and United States. Air Force. Air Research and Development Command (page images at HathiTrust)
• Factors controlling resistance to deformation and mechanical failure in polycrystalline (glass-free) ceramics (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by J. B. Wachtman, Wright Air Development Center, United States. Air Force. Air Research and Development Command, and United States. Bureau of Standards (page images at HathiTrust)
• Thermal diffusivity measurements on metals and ceramics at high temperatures (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by R. L. Rudkin, R. L. Rudking, R. J. Jenkins, W. J. Parker, United States. Air Force. Systems Command. Aeronautical Systems Division, and U.S. Naval Radiological Defense Laboratory (page images at HathiTrust)
• Preparation and electrical properties of some ceramic materials at microwave frequencies (L.G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1970., 1970), by Martin R. Stiglitz and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Biaxial fracture strength of brittle materials (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by Henry W. Babel, Air Force Materials Laboratory (U.S.), United States. Air Force. Systems Command, and Douglas Aircraft Company (page images at HathiTrust)
• A fundamental study of the variables associated with the mixing of ceramic raw materials (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by D. W. Fuerstenau, J. A. Pask, R. M. Fulrath, United States. Air Force. Systems Command. Aeronautical Systems Division, and Berkeley University of California (page images at HathiTrust)
• Influence of environment on ceramic properties (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1960., 1960), by George R. Pulliam, Bruce G. Leonard, United States. Wright Air Development Division, United States. Air Force. Air Research and Development Command, and Douglas Aircraft Company (page images at HathiTrust)
• Studies of the brittle behavior of ceramic materials. Part II (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Proceseses, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Nicholas A. Weil, United States. Air Force. Systems Command. Aeronautical Systems Division, and Armour Research Foundation (U.S.) (page images at HathiTrust)
• Thermal properties of materials at elevated temperatures (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by Herbert W. Deem, Charles F. Lucks, Webster D. Wood, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Battelle Memorial Institute (page images at HathiTrust)
• A review of ceramic thin film technology (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Directorate of Laboratories, Air Force Systems Command, United States Air Force, 1967., 1967), by Milo Macha, Air Force Materials Laboratory (U.S.), and Inc. Librascope Group General Precision Systems (page images at HathiTrust)
• Alumina ceramics (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by Walter H. Gitzen, Air Force Materials Laboratory (U.S.), United States. Air Force. Systems Command, and Ohio State University. Research Foundation (page images at HathiTrust)
• A Study of notches in brittle materials by relating stress intensification and volume (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Air Force Systems Command, United States Air Force, 1968., 1968), by H. Stuart Starrett, C. D. Pears, Air Force Materials Laboratory (U.S.), and Ala.) Southern Research Institute (Birmingham (page images at HathiTrust)
• Engineering properties of ceramics : databook to guide materials selection for structural applications (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by J. F. Lynch, W. H. Duckworth, C. G. Ruderer, Air Force Materials Laboratory (U.S.), United States. Air Force. Systems Command, and Battelle Memorial Institute (page images at HathiTrust)
• Investigation of nondestructive methods for the evaluation of graphite materials (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Air Force Systems Command, United States Air Force, 1969., 1969), by R. C. Stinebring, J. W. Orner, A. W. Schultz, Air Force Materials Laboratory (U.S.), and Avco Corporation (page images at HathiTrust)
• Stability of ceramic materials at temperatures to 2000°C (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1960., 1960), by Joan Berkowitz, United States. Wright Air Development Division, United States. Air Force. Air Research and Development Command, and Inc Arthur D. Little (page images at HathiTrust)
• Excitation processes in ceramics and the anomalous increase in thermal conductivity at elevated temperatures (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Proceses, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by D. H. Whitmore, Ill.) Northwestern University (Evanston, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command (page images at HathiTrust)
• Surface and environmental effects on ceramic materials (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, U.S. Air Force, 1960., 1960), by P. Gibbs, W. G. Rogers, M. H. Miles, E. K. Beauchamp, Bertram Gale Dick, G. S. Baker, United States. Air Force. Air Research and Development Command, United States. Wright Air Development Division, and University of Utah. |b Department of Physics and Astronomy (page images at HathiTrust)
• La céramique industrielle : chimie, technologie (Gauthier-Villars, 1929), by Albert Granger (page images at HathiTrust; US access only)
• Beispiele zur Berechnung keramischer Massen und Glasuren (W. Knapp, 1911), by H. Vollenbach (page images at HathiTrust; US access only)

More items available under broader and related terms at left.