The Online Books Page

Chrome-nickel steel

See also what's at your library, or elsewhere.

• Chrome steel
• Chromium alloys
• Nickel alloys
• Nickel steel
• Steel alloys

• Chrome-nickel steel -- Welding
• Stainless steel
• Steel, Heat resistant

• Chromium-nickel steel

• Tensile elastic properties of 18:8 chromium-nickel steel as affected by plastic deformation / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Dunlap J. McAdam, R. W. Mebs, and United States. National Bureau of Standards (page images at HathiTrust)
• Possible alternates for nickel, chromium and chromium-nickel constructional alloy steels. (New York, N.Y. : American Iron and Steel Institute, 1942), by American Iron and Steel Institute (page images at HathiTrust)
• Tables of data on chemical compositions : physical and mechanical properties of wrought corrosion-resisting and heat-resisting chromium and chromium-nickel steels / (Phildelphia, Pa. : The Society, [c1943]), by Iron-Chromium-Nickel American Society for Testing Materials. Committee A-10 on Iron-Chromium, Francis L. LaQue, and Russell Franks (page images at HathiTrust)
• Forming of austenitic chromium-nickel stainless steels. (New York, [1954]), by International Nickel Company and Vsevolod Nicholas Krivobok (page images at HathiTrust)
• Chromium, nickel, and other alloying elements in U.S.-produced stainless and heat-resisting steel / (Washington, D.C. (2401 E St., N.W., MS #9800, Washington 20241-0001) : U.S. Dept. of the Interior, Bureau of Mines, 1991), by John F. Papp (page images at HathiTrust)
• Effect of alloying elements on oxidation of low-chromium alloys / (Pittsburgh, Pa. : U.S. Dept. of the Interior, Bureau of Mines, 1986), by Je M. Oh (page images at HathiTrust)

• Pickling of stainless steels--a review / ([Avondale, Md.] : United States Dept. of the Interior, Bureau of Mines, 1984), by B. S. Covino, Philip M. Fabis, and John V. Scalera (page images at HathiTrust)
• Stainless steel angles from Japan : [investigation no. 731-TA-699 (preliminary)] (Washington, D.C. : U.S. International Trade Commission, [1994]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel angle from Japan (Washington, D.C. : U.S. International Trade Commission, [1995]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from India : [investigation no.731-TA-638 (final)] (Washington, D.C. : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Facts and figures about the stainless steel skyscraper; the Socony Mobil building. ([New York, 1955]), by American Iron and Steel Institute. Committee of Stainless Steel Producers and Socony Mobil Oil Company (page images at HathiTrust; US access only)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, first calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (Washington, D.C. : U.S. International Trade Commission, 1979), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Stress corrosion study of PH13-8Mo stainless steel using the slow strain rate technique / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Pablo D. Torres and George C. Marshall Space Flight Center (page images at HathiTrust)
• Reaction of perfluoroalkylpolyethers (PFPE) with 440C stainless steel in vacuum under sliding conditions at room temperature / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Shigeyuki Mori and Wilfredo Morales (page images at HathiTrust)
• Lead, indium, and tin as potential lubricants in liquid hydrogen / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1971), by Donald W. Wisander and Lewis Research Center (page images at HathiTrust)
• Gas-phase hydrogen permeation through alpha iron, 4130 steel, and 304 stainless steel from less than 100 ̊C to near 600 ̊C / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Howard G. Nelson, James E. Stein, and Ames Research Center (page images at HathiTrust)
• The stress corrosion susceptibility of several alloys in hydrazine fuels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by William Gilbreath, Michael J. Adamson, and Ames Research Center (page images at HathiTrust)
• Friction behavior of 304 stainless steel of varying hardness lubricated with benzene and some benzyl structures / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• Corrosion study of bare and coated stainless steel / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by J. D. Morrison and John F. Kennedy Space Center (page images at HathiTrust)
• Plastic deformation at surface during unlubricated sliding / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Takashi Yamamoto, Donald H. Buckley, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Stainless steel and alloy tool steel. (Washington, D.C. : United States International Trade Commission), by United States International Trade Commission. Minerals and Metals Division and United States International Trade Commission (page images at HathiTrust)
• Top-of-the-stove stainless steel cooking ware from Korea and Taiwan [microform] : determinations of the commission in investigations nos. 701-TA-267-268 (final) under the Tariff Act of 1930, together with the information obtained in the investigations, determinations of the commission in investigations nos. 731-TA-304-305 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. (Washington, DC : U.S. International Trade Commission, [1987]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-201-48 under section 201 of the Trade act of 1974. (Washington, D.C. : U.S. International Trade Commission, [1983]), by United States International Trade Commission (page images at HathiTrust)
• A study of the structure and properties of certain "stainless" steels / (1920), by Saul Solkind Callner (page images at HathiTrust; US access only)
• The architectural and domestic uses of stainless steel. (New York : The Company, c1937), by Union Carbide Corporation. Electro Metallurgical Company (page images at HathiTrust; US access only)
• Ludlum Steel Company, plaintiff, vs. Daniel F. Terry, defendant. (New York, Evening Post Job Printing Office, [1928]), by Ludlum Steel Company and Daniel F. Terry (page images at HathiTrust; US access only)
• The mechanism of stress corrosion in stainless steels : final report, May 15, 1959 to May 15, 1960. (Chicago, Ill. : Armour Research Foundation, Illinois Institute of Technology, 1960), by Armour Research Foundation (U.S.) and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Sodium mass transfer - I : test loop design / ([Oak Ridge, Tenn.] : United States Atomic Energy Commission, Division of Technical Information ; [Washington, D.C.] : [Available from the Office of Technical Services, Dept. of Commerce], [1962]), by R. W. Lockhart, M. R. Lane, G. Billuris, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Recoil activity from stainless-steel cladding : a major contribution to coolant-stream radioactivity in GCR-2 / (Oak Ridge, Tenn. : Massachusetts Institute of Technology, Engineering Practice School, 1959), by W. L. Brassert, F. H. Morse, G. K. Gardiner, U.S. Atomic Energy Commission, and Massachusetts Institute of Technology. Engineering Practice School (page images at HathiTrust)
• Analysis of failure of type 304 stainless steel clad swaged powder fuel assembly / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Division of Technical Information, 1963), by E. A. Lees, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• ANPP Code Development Program : an experimental program on water-moderated arrays of uranium and stainless steel / ([Oak Ridge, Tenn.] : United States Atomic Energy Commission, Division of Technical Information ; [Washington, D.C.] : [Available from the Office of Technical Services, Dept. of Commerce], [1962]), by L. Welshans, Martin Company. Nuclear Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Joint design for making root pass welds without filler material / (Richland, Wash. : Hanford Atomic Products Operation, 1956), by L. C. Lemon, W. R. Smith, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Heat transfer, flow instability and critical heat flux for water in a small tube at 200 psia / (Argonne, Ill. : Argonne National Laboratory, Reactor Engineering Division, 1963), by R. J. Weatherhead and Argonne National Laboratory (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Korea : determination of the Commission in investigation no. 731-TA-563 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (Washington, DC : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe from Malaysia : determination of the Commission in investigation no. 731-TA-644 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation (Washington, DC : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel flanges from India and Taiwan : determinations of the Commission in investigations no. 731-TA-639 and 640 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (Washington, D.C. : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from Brazil, France, and India : determinations of the Commission in investigations nos. 731-TA-636-638 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (Washington, D.C. : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel flanges from India and Taiwan (Washington, D.C. : U.S. International Trade Commission, [1994]), by United States International Trade Commission (page images at HathiTrust)
• Class 150 stainless steel threaded pipe fittings from Taiwan : [investigation no. 731-TA-658 (preliminary)] (Washington, D.C. : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe from Malaysia : [investigation no. 731-TA-644 (final)] (Washington, DC : U.S. International Trade Commission, [1994]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from Brazil and France : [investigations nos. 731-TA-636 and 637 (final)] (Washington, D.C. : U.S. International Trade Commission, [1994]), by United States International Trade Commission (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Taiwan : determination of the Commission in investigation no. 731-TA-564 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (Washington, DC : U.S. International Trade Commission, [1993]), by United States International Trade Commission (page images at HathiTrust)
• American Stainless Steel Company, plaintiff, vs. Ludlum Steel Company, defendant. Brief for defendant at final hearing. (New York, The Evening Post Job Printing Office, Inc., [1921?]), by American Stainless Steel Company and Ludlum Steel Company (page images at HathiTrust)
• Stainless steel and alloy tool steel [microform] : report to the President on investigation no. TA-203-16 under section 203 of the Trade Act of 1974. (Washington, DC : U.S. International Trade Commission, [1987]), by United States International Trade Commission (page images at HathiTrust)
• Welded carbon steel pipes and tubes from Brazil, France, Italy, the Republic of Korea, and West Germany : determinations of the Commission in investigations nos. 701-TA-165 through 169 (preliminary) under the Tariff act of 1930, together with the information obtained in the investigations. (Washington, D.C. : U.S. International Trade Commission, 1982), by United States International Trade Commission, Gerald R. Benedick, Richard Weible, and Abigail Eltzroth (page images at HathiTrust)
• Stainless steel sheet and strip and stainless steel plate from the United Kingdom : determinations of the Commission in investigations nos. 701-TA-195 and 196 (preliminary) under section 703(a) of the Tariff act of 1930, together with the information obtained in the investigations. (Washington, D.C. : U.S. International Trade Commission, 1982), by United States International Trade Commission, Wilhelm Zeitler, Daniel Klett, and Patrick Magrath (page images at HathiTrust)
• Evaluation of ferritic substitutes for the austenitic stainless steels : resistance to attack by sodium / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, 1954), by E. G. Brush, R. F. Koenig, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stainless steel handbook. (Pittsburgh, [c1956]), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Effects of preoxidation treatments on spectral normal and total normal emittance of inconel, inconel-x, and type 347 stainless steel / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington D.C. 20230], 1964), by Wayne S. Slemp, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Fabrication of U. S. S. stainless and heat resisting steels. (Pittsburgh : The Corporation, 1957), by United States Steel Corporation (page images at HathiTrust)
• Effects of longtime environmental exposure on mechanical properties of sheet materials for a supersonic transport / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Richard A. Pride and Langley Research Center (page images at HathiTrust)
• Stainless steel plate from Sweden : determination of inquiry in investigation no. AA1921-114 under the Antidumping Act, 1921, as amended. (Washington, D.C. : U.S. Tariff Commission, [1973]), by United States Tariff Commission (page images at HathiTrust; US access only)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-203-3 under section 203(i)(2) of the Trade act of 1974 / (Washington : U.S. International Trade Commission, 1977), by Nicholas C. Tolerico and United States International Trade Commission (page images at HathiTrust; US access only)
• Magnetic force upset welding of dissimilar thickness stainless-steel T-joints / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by Kenneth H. Holko, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Stainless steel sheet and strip from Spain : determination of the Commission in investigation no. 731-TA-164 (final) under the Tariff Act of 1930, together with the information obtained in the investigation / (Washington, D.C. : U.S. International Trade Commission, [1984]), by United States International Trade Commission and Bruce Cates (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, second calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (Washington, D.C. : U.S. International Trade Commission, [1979]), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-201-5 under section 201 of the Trade act of 1974. (Washington : U.S. International Trade Commission, 1976), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel sheet and strip from France : determination of the Commission in investigation no. 731-TA-95 (preliminary) under section 733(a) of the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, D.C. : U.S. International Trade Commission, [1982]), by United States International Trade Commission (page images at HathiTrust)
• Performance and cavitation damage of an axial-flow pump in 1500 ̊F (1089 K) liquid sodium / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Dean C. Reemsnyder, Carl Weigel, Walter S. Cunnan, and Lewis Research Center (page images at HathiTrust)
• Welded stainless steel pipes and tubes from Sweden : views on remand in investigation no. 731-TA-354 (Final). (Washington, D.C. : U.S. International Trade Commission, 1990), by United States International Trade Commission (page images at HathiTrust; US access only)
• Stainless steel sheet and strip from Spain : determination of the Commission in investigation no. 731-TA-164 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, D.C. : U.S. International Trade Commission, [1984]), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe and tube from Japan : determination of no injury in investigation no. AA1921-180 under the Antidumping Act, 1921, as amended, together with the information obtained in the investigation. (Washington, D.C. : U.S. International Trade Commission, [1978]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, first calendar quarter, 1978 : report to the President on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (Washington, D.C. : U.S. International Trade Commission, [1978]), by Nicholas Tolerico and United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-203-5 under section 203 of the Trade act of 1974 / (Washington : U.S. International Trade Commission, 1979), by Daniel Francis Leahy, Nicholas Tolerico, and United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire cloth from Japan : determination of the Commission in investigation no. 731-TA-190 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, D.C. : U.S. International Trade Commission, [1984]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel. report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1980. (Washington, D.C. : United States International Trade Commission,), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel. report to the President on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (Washington, D.C. : U.S. International Trade Commission, 1978-), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, fourth calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (Washington, D.C. : U.S. International Trade Commission, [1980]), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Japan : determination of the commission in investigation no. 731-TA-376 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, DC : U.S. International Trade Commission, [1988]), by United States International Trade Commission (page images at HathiTrust)
• Certain seamless steel pipes and tubes from Japan : determination of the Commission in investigation no. 731-TA-87 (final) under the Tariff act of 1930, together with the information obtained in the investigation. (Washington, D.C. : U.S. International Trade Commission, 1983), by United States International Trade Commission, Clark Workman, James J. Lukes, and Abigail Eltzroth (page images at HathiTrust)
• Stainless steel and alloy tool steel, U.S. production, shipments, employment, man-hours, and prices third calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Trade Act of 1930. (Washington, D.C. : U.S. International Trade Commission, [1979]), by United States International Trade Commission. Office of Industries and United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Top-of-the-stove stainless steel cooking ware from Korea and Taiwan : determinations of the Commission in investigations nos. 701-TA-267-268 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations : determinations of the Commission in investigations nos. 731-TA-304-305 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations. (Washington, DC : U.S. International Trade Commission, [1986]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel sheet and strip from West Germany : determination of the Commission in investigation no. 731-TA-92 (preliminary) under section 733(a) of the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, D.C. : Commission, 1982), by United States International Trade Commission and Daniel Leahy (page images at HathiTrust)
• Stainless steel pipes and tubes from Sweden : determination of the Commission in investigation no. 701-TA-281 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, DC : U.S. International Trade Commission, [1986]), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel pipes and tubes from Sweden : determination of the Commission in investigation no. 701-TA-281 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, DC : U.S. International Trade Commission, [1987]), by United States International Trade Commission (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Japan : determination of the Commission in investigation no. 731-TA-376 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, DC : U.S. International Trade Commission, [1987]), by United States International Trade Commission (page images at HathiTrust)
• Study of austenitic stainless steel welded with low alloy steel filler metal / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Forrest A. Burns, Ray A. Dyke, John F. Kennedy Space Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Influence of fretting on flexural fatigue of 304 stainless steel and mild steel / (Washington : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Information Office, 1978), by Robert C. Bill, Douglas A. Rohn, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Evaluation of tantalum/316 stainless steel bimetallic tubing / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1970), by J. N. Kass, D. R. Stoner, Lewis Research Center, and Westinghouse Electric Corporation. Astronuclear Laboratory (page images at HathiTrust)
• The influence of low wall temperature on boundary-layer transition and local heat transfer on 2-inch-diameter hemispheres at a Mach number of 4.95 and a Reynolds number per foot of 73.2 x 10⁶ / (Washington : National Aeronautics and Space Administration, [1960]), by Morton Cooper, Jerome D. Julius, Edward E. Mayo, and Langley Research Center (page images at HathiTrust)
• Heat treatment for improved stress-corrosion resistance of 17-7 ph stainless steel / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by Carl R. Johnson, John D. Grimsley, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A preliminary investigation of the destruction of solid-propellant rocket motors by impact from small particles / (Washington : National Aeronautics and Space Administration, [1960]), by David J. Carter and Langley Research Center (page images at HathiTrust)
• Thermal radiation absorptance and vacuum outgassing characteristics of several metallic and coated surfaces / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Takuo Mimura, Paul E. Colarusso, Evelyn Anagnostou, and Lewis Research Center (page images at HathiTrust)
• Bimetal sensor for averaging temperature measurement of nonuniform temperature profiles / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Ralph T. Dittrich, Michael P. Lynch, and Lewis Research Center (page images at HathiTrust)
• Effect of cover gas pressures on accelerated cavitation damage in sodium / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1867]), by Stanley G. Young, James R. Johnston, and Lewis Research Center (page images at HathiTrust)
• Correlation of irradiation data using activation fluences and irradiation temperature / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1971), by John H. Lynch, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Friction, wear, and adhesion characteristics of titanium-aluminum alloys in vacuum / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1966]), by Donald H. Buckley, Robert L. Johnson, and Lewis Research Center (page images at HathiTrust)
• The Explorer XXIII micrometeoroid satellite : description and results for the period November 6, 1964, through November 5, 1965 / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Robert L. O'Neal and Langley Research Center (page images at HathiTrust)
• Fatigue of liquid rocket engine metals at cryogenic temperatures to -452 ̊F (4 ̊K) / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Alfred J. Nachtigall, John C. Freche, Stanley J. Klima, and Lewis Research Center (page images at HathiTrust)
• Fracture toughness and flaw growth in nitronic 40 at cryogenic temperatures / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1984), by Marcia S. Domack and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Experimental and analytical investigations on multiple liquid impact erosion / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]), by A. Thiruvengadam, M. Gunasekaran, S. Lee Rudy, United States National Aeronautics and Space Administration, and inc Hydronautics (page images at HathiTrust)
• Micrometeoroid satellite (Explorer XIII) stainless-steel penetration rate experiment / (Washington, D.C. : National Aeronautics and Space Administration, [1963]), by Lewis Research Center (page images at HathiTrust)
• Design and fabrication of a counterflow double-containment tantalum-stainless steel mercury boiler / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]), by Laurence W. Gertsma, David W. Medwid, and Lewis Research Center (page images at HathiTrust)
• Experimental study of transmission and backscatter of 0.075 to 1.0 MeV electrons by aluminum and stainless steel / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by William E. Miller, Herbert D. Hendricks, and Langley Research Center (page images at HathiTrust)
• Oxidation and corrosion behavior of modified-composition, low-chromium 304 stainless steel alloys / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Joseph R. Stephens, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• X-ray photelectron spectrososcopic study of surface chemistry of dibenzyl-disulfide on steel under mild and severe wear conditions / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Donald R. Wheeler, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Cavitation damage and the effect of fluid temperature on the performance of an axial-flow pump in liquid sodium / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]), by Walter S. Cunnan, Dean C. Reemsnyder, and Lewis Research Center (page images at HathiTrust)
• Hypervelocity impacts into stainless-steel tubes armored with reinforced beryllium / ([Washington, D.C.] : National Aeronautics and Space Administration ; Springfield, Va. : [National Technical Information Service, 1966]), by A. R. McMillan, James H. Diedrich, Nestor Clough, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• The susceptibility of six stainless steels to stress corrosion at ambient and elevated temperatures / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1964), by David N. Braski, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Physical adsorption of nitrogen gas on the polished surface of 347 stainless steel at very low pressures / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by R. A. Outlaw, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• A study of sensitization in types 301 and 304L stainless steels using mossbauer spectroscopy / (Washington, D.C. : National Aeronautics and Space Administration, 1968), by O. W. Albritton (page images at HathiTrust; US access only)
• Stabilization of carbon and nitrogen in stainless steel and its effect on mass transfer in a stainless steel - Cb-1Zr - potassium system / R. W. Harrison. (Washington, D.C. : National Aeronautics and Space Administration, 1967), by R. W. Harrison (page images at HathiTrust; US access only)
• Welding stainless steels. ([Brackenridge, Pa.] Allegheny Ludlum Steel Corporation, [1943]), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Cyclic creep-rupture behavior of three high-temperature alloys / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by Gary R. Halford, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Effects of substituting cobalt for nickel on the tensile properies and hardness of two types of stainless steel / ([Washington] : Dept. of the Interior, Bureau of Mines, [1964]), by M. M. Tilman and United States Bureau of Mines (page images at HathiTrust; US access only)
• Tendon suture technic with stainless steel wire. (Somerville, N.J. : Ethicon, [196-]), by Inc. Ethicon (page images at HathiTrust)
• Thermal conductivity and electrical resistivity standard reference materials : austenitic stainless steel, SRM's 735 and 798, from 4 to 1200 K / (Washington : U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1975), by J. G. Hust and P. J. Giarratano (page images at HathiTrust; US access only)
• Homogeneity characterization of NBS spectrometric standards III: white cast iron and stainless steel powder compact / (Washington: For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Harvey Yakowitz, R. E. Michaelis, and D. L. Vieth (page images at HathiTrust)
• Electrical resistivity of electrolytic iron, SRM 797, and austenitic stainless steel, SRM 798, from 5 to 280 K / (Washington : U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1974), by J. G. Hust (page images at HathiTrust)
• Reactor primary coolant system pipe rupture study method for detection of sensitization in stainless steel / (Washington : The Commission, 1965-), by W. L. Clarke, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch, and General Electric Company. Nuclear Energy Engineering Division (page images at HathiTrust)
• NDE of stainless steel and on-line leak monitoring of LWRs : semiannual report, October 1984-March 1985 / (Argonne, Ill. : Argonne National Laboratory, 1985), by D. S. Kupperman, Argonne National Laboratory. Materials Science and Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Stainless steel handbook. (Pittsburgh, [1951]), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Evaluation and acceptance of welded and repair-welded stainless steel for LWR service / (Washington, D.C. : Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commision, 1984-), by D. G. Atteridge, R. E. Page, S. M. Bruemmer, Pacific Northwest Laboratory, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Safety, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Thermal conductivity of austenitic stainless steel, SRM 735, from 5 to 280 K ([Washington] U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1972), by J. G. Hust and Larry L. Sparks (page images at HathiTrust; US access only)
• An explortory study of inhibition of intergranular stress corrosion cracking in sensitized type 304 stainless steel / (Washington : Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research ; Springfield, Va. : for sale by the National Technical Information Service, 1979), by B. F. Brown, R. T. Foley, C. S. O'Dell, D.C.). Department of Chemistry American University (Washington, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Long-term embrittlement of cast duplex stainless steels in LWR systems : annual report October 1984-September 1985 / (Washington, D.C. : The Commission, 1986), by O. K. Chopra, H. Chung, Argonne National Laboratory. Materials Science and Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Report on the elevated-temperature properties of stainless steels / (Philadelphia : American Society for Testing Materials, [1952]), by Ward F. Simmons and Howard Clinton Cross (page images at HathiTrust)
• Cold leg integrity evaluation / (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1980), by M. E. Mayfield, U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research, and Battelle Memorial Institute. Columbus Laboratories (page images at HathiTrust)
• Stainless steels : an elementary text for consumers. (Cleveland : American Society for Metals, 1949), by Carl Andrew Zapffe (page images at HathiTrust)
• Cold leg integrity evaluation, phase 1 : final report, July 1978 - September 1978 / (Washington : Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research, Metallurgy & Materials Research Branch ; Springfield, Va. : for sale by the National Technical Information Service, 1979), by U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch, R. J. Eiber, and Battelle Memorial Institute. Columbus Laboratories (page images at HathiTrust)
• Benchmark experiments to test plutonium and stainless steel cross sections / ([Washington] : The Commission, 1978), by U. P. Jenquin, S. R. Bierman, and Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards (page images at HathiTrust)
• The corrosion behavior of some stainless steel-boron alloys in high temperature water /, by Donald C. Belouin, Ulrich Merten, Knolls Atomic Power Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Corrosion of type 18-18-2 stainless steel in 1200©�F static sodium /, by W. T. Lee, sponsor U.S. Atomic Energy Commission, sponsor North American Rockwell Corporation. Atomics International Division, and issuing body Liquid Metal Engineering Center (U.S.) (page images at HathiTrust)
• Reduction of the outgassing of thick stainless-steel sheets in ultrahigh vacuum by high-temperature vacuum treatment /, by Gerhard Lewin, U.S. Atomic Energy Commission, and Princeton University. Plasma Physics Laboratory (page images at HathiTrust)
• Corrosion phenomenon of endodontic files : a colorimetric analysis : a thesis submitted in partial fulfillment ... endodontics / (1973), by Richard Alan Rubinstein and University of Michigan. School of Dentistry (page images at HathiTrust)
• Magnetic fusion energy materials technology program annual progress report for period ending June 30, 1976 /, by J. L. Scott, Sigfred Peterson, United States. Energy Research and Development Administration, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Impact sensitivity of metals (titanium) exposed to liquid nitrogen tetroxide / (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force System Command, u.S. Air Force, 1961), by Allied Chemical Corporation. Nitrogen Division and H. F. Scott (page images at HathiTrust)
• Mechanical behavior of type 304 stainless steel in copper-contaminated sodium in the range 950 to 1300[degrees]F /, by D. F. Atkins, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• Deposition of manganese in a sodium-stainless steel system /, by J. Guon, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• Corrosive environment tester for filter media /, by G. S. Petit, R. D. Rivers, C. A. Keinberger, C. W. Weber, Oak Ridge Gaseous Diffusion Plant, Union Carbide Corporation, and United States. Energy Research and Development Administration (page images at HathiTrust)
• The effect of manganese and silicon content on the hot workability of type 304 stainless steel containing 2 w/o boron / (Argonne, Ill. : Argonne National Laboratory, 1961), by L. C. Hymes, N. Balai, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Reactor Engineering Division. ANL (page images at HathiTrust)
• An iron-aluminum-molybdenum-alloy as a chromium-free stainless steel substitute / ([Avondale, Md.] : U.S. Dept. of the Interior, Bureau of Mines, [1982]), by J. S. Dunning (page images at HathiTrust)
• Structural stability and oxidation resistance of substitute alloys with various Cr and Mn levels / (Pittsburgh, PA : U.S. Dept. of the Interior, Bureau of Mines, 1989), by Je M. Oh and M. L. Glenn (page images at HathiTrust)
• Darex pilot plant studies / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by J. J. Shefcik, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)
• Some observations of the intergranular corrosion of irradiated type 304 stainless steel / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1964), by E. L. Jr Long, C. Michelson, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Enthalpies and heat capacities of stainless steel (316), zirconium, and lithium at elevated temperatures / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1952), by R. F. Redmond, J. Lones, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Reactor Experimental Engineering Division (page images at HathiTrust)
• Sulfex process : depassivation of stainless steel / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1959), by T. A. Gens, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section B. (page images at HathiTrust)
• Remote welding of stainless steel containers / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1957), by E. E. Pierce, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Operations Division (page images at HathiTrust)
• Corrosion of stainless steel in acidic nitrate waste solutions from processing stainless steel reactor fuels / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1963), by W. E. Clark, E. S. Snavely, B. Willis, L. Rice, D. N. Hess, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• Summary report : an evaluation of the substitution of zircaloy for stainless steel in N.S. Savannah fuel-element containers / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1963), by C. L. Whitmash, L. R. Shobe, L. D. Schaffer, H. C. McCurdy, E. E. Gross, T. D. Anderson, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Effect of environment on the creep properties of type 304 stainless steel at elevated temperatures / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1962), by H. E. Jr McCoy, D. A. Jr Douglas, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Electrolytic dissolution of nuclear fuels. ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1962]), by J. R. Aylward, Elizabeth M. Whitener, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Experimental and analytical reactivity studies of clean critical stainless steel cores / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1961]), by A. H. Spano, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Effect of nuclear reactor radiation on metals / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1950), by D. S. Billington, Sidney Siegel, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Accelerated corrosion test of stainless steel samples in an effort to establish galvanic attack / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1951), by James T. Waber, Santon Waber, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Cone-arc welding / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1953), by P. Patriarca, Oak Ridge National Laboratory, U.S. Atomic Energy Commission, and G. M. Slaughter (page images at HathiTrust)
• Contact corrosion of stainless steels in water at temperatures up to 600©�F / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1953), by H. A. Pray, Warren E. Berry, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Properties of uranium dioxide-stainless steel dispersion fuel plates / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1959]), by Stan J. Paprocki, Joseph M. Fackelmann, Donald L. Keller, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Radiation stability of spherical and hydrothermal UO₂ dispersed in type 318 stainless steel / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce, [1961]), by Ronald F. Dickerson, D. L. Keller, John E. Gates, James H. Saling, David G. Freas, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Joining zircaloy-stainless steel and SAP alloys by friction, rolling and explosive techniques / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1962]), by Ronald J. Carlson, Stanley W. Porembka, Stan J. Paprocki, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Investigation of effect of fluoride on corrosion of 2S-0 aluminum and 347 stainless steel in fuming nitric acid a t 170©� / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Charles E. Feiler, Gerald Morrell, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
• Electroplating of tapered silver deposits on stainless steel and inconel tubes for a high-capacity mercury-column rheostat / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1958), by L. J. Quintana, R. Seegmiller, J. K. Gore, J. M. Taub, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Stainless steel information manual for the Savannah River Plant / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1964]), by W. C. Rion, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stress corrosion cracking of type 304 stainless steel : status report, March 1, 1964 / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Savannah River Laboratory, [1964]), by McIntyre R. Louthan, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• A mechanism for stress corrosion cracking of stainless steel in reactor systems / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1969), by Robert S. Ondrejcin, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Evaluation of tandem-extruded joints between zircaloy and stainless steel / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1962]), by J. Walter Joseph, F. C. Apple, U.S. Atomic Energy Commission, and Savannah River Laboratory (page images at HathiTrust)
• Stress relaxation in stainless steel during irradiation / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1959]), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Electrolytic dissolution of stainless steel / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1959]), by Hugh E. Henry, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Sodium mass transfer - II : screening test data and analysis / ([Oak Ridge, Tenn.] : United States Atomic Energy Commission, Division of Technical Information ; [Washington, D.C. : Available from the Office of Technical Services, Dept. of Commerce, 1962]), by R. W. Lockhart, R. S. Young, F. J. Hetzler, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Investigation of failure of type 347 stainless steel tank for lithium / (Oak Ridge, Tennessee : Technical Information Service, 1950), by F. J. Lambert, Charles Coughlen, Carbide and Carbon Chemicals Corporation, Oak Ridge Y-12 Plant, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Carburization of austenitic stainless steel in liquid sodium / (Canoga Park, California : Atomics International, a division of North American Aviation, Inc., [1960]), by W. J. Anderson, G. V. Sneesby, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Thermal cycling test of type 347 stainless steel in-pile tubes / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1959), by S. Bigelow, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• A discussion of the susceptibility of AISI 410 to stress corrosion and means of eliminating the stress-corrosion problem / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1961), by Henry Suss, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Carburization of austenitic stainless steel by uranium carbides in sodium systems / (Canoga Park, California : Atomics International, 1963), by B. A. Webb, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effects of irradiation on the properties of boron-stainless steel powder dispersion samples /, by John D. Eichenberg, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• A nondestructive test for intergranular corrosion in stainless steel tubing /, by Richard C. Robinson, J. D. Ross, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Heat transfer measurements at sodium - stainless steel interface /, by James W. Moyer, W. A. Riemen, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fabrication of 17-7ph and ph15-7Mo stainless steel by bend rolling, deep drawing, and spinning /, by C. T Olofson and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Review of recent developments in the technology of high-strength stainless steels /, by D. A Roberts and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Design information on AM-350 stainless steel for aircraft and missiles /, by R. J Favor, W. P. Achbach, O. L. Deel, Defense Metals Information Center (U.S.) issuing body, and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• Review of recent developments in the technology of high-strength stainless steels /, by D. A Roberts and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report on stainless steel and titanium sandwich structures /, by W. J. Lewis, P. J. Rieppel, G. E. Faulkner, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Dissolution and distribution by liquid sodium of activated type 347 stainless steel / (Downey, California : Atomic Energy Research Department, North American Aviation, Inc., [1954]), by A. M. Saul, D. Hawley, issuing body U.S. Atomic Energy Commission, and North American Aviation (page images at HathiTrust)
• Long-term embrittlement of cast duplex stainless steels in LWR systems /, by O. K Chopra, G. Ayrault, Argonne National Laboratory. Materials Science and Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Evaluation of welded and repair-welded stainless steel for LWR service /, by D. G Atteridge, R. E. Page, S. M. Bruemmer, Pacific Northwest Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• The EPR method for the detection of sensitization in stainless steels / (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1981), by W. L. Clarke, General Electric Company. Nuclear Engineering Division, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• The stainless steel file for root filling : a dissertation submitted in partial fulfillment ... in endodontics and radiology ... / (1960), by Gerald C. Dietz and University of Michigan. School of Dentistry (page images at HathiTrust)
• Chromium, nickel, and other alloying elements in U.S.-produced stainless and heat-resisting steel / (Washington, D.C. (2401 E St., N.W., MS #9800, Washington 20241-0001) : U.S. Dept. of the Interior, Bureau of Mines, 1991), by John F. Papp (page images at HathiTrust)
• Pickling of stainless steels--a review / ([Washington, D.C.] : United States Dept. of the Interior, Bureau of Mines, 1984), by B. S. Covino, Philip M. Fabis, and John V. Scalera (page images at HathiTrust)
• Nitrided stainless steels for high-temperature water service / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, 1954), by Kermit Anderson, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. ANL. (page images at HathiTrust)
• A study of irradiation effects in type "A" nickel and type 347 staineless steel tensile specimens / (Argonne, Ill. : Argonne National Laboratory, 1960), by S. H. Paine, D. W. Hackett, W. F. Murphy, U.S. Atomic Energy Comission. ANL, and Argonne National Laboratory. ANL. (page images at HathiTrust)
• Studies of metal-water reactions at high temperatures. (Argonne, Ill. : Argonne National Laboratory, 1962), by Frank J. Testa, Marshall F. Deerwester, Richard O. Ivins, Robert C. Liimatainen, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Chemical Engineering Division. ANL (page images at HathiTrust)
• Thermal stresses in concentrically heated hollow cylinders : supplemental data on coefficient of thermal expansion, modulus of elasticity and Poisson's ratio as functions of temperature / (Argonne, Ill. : Argonne National Laboratory, 1960), by J. C. Heap, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Reactor Engineering Division. ANL (page images at HathiTrust)
• Iron-base alloys strengthened by laves phases as substitutes for stainless steels / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1980), by J. S. Dunning, W. L. O'Brien, and M. L. Glenn (page images at HathiTrust)
• Electrolytic manganese in open-hearth and Bessemer steel tests at Jones & Laughlin Steel Corp., Pittsburgh, Pa. / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1948]), by Frederick Sillers (page images at HathiTrust)
• Reduced-chromium stainless steel substitutes containing silicon and aluminum / ([Pittsburgh, Pa.] : U.S. Dept. of the Interior, Bureau of Mines, [1984]), by M. L. Glenn and D. E. Larson (page images at HathiTrust)
• Rapid identification of stainless steel and superalloy scrap / ([Avondale, MD] : United States Dept. of the Interior, Bureau of Mines, [1984]), by R. D. Brown, C. A. Zieba, and W. D. Riley (page images at HathiTrust)
• Analysis of vapor-aluminum-diffused stainless steels / ([Avondale, Md.] : U.S. Dept. of the Interior, Bureau of Mines, [1982]), by L. L. Oden, R. A. McCune, and M. P. Krug (page images at HathiTrust)
• Stainless steel-gadolinium alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by H. Kato, C. Armantrout, W. Barstow, Mark I. Copeland, U.S. Atomic Energy Commission, and United States Bureau of Mines (page images at HathiTrust)
• Ferrite control by cobalt additions to a semiaustenitic stainless steel / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1968), by M. M. Tilman (page images at HathiTrust)
• Effects of substituting cobalt for nickel on the tensile properties and hardness of two types of stainless steel / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by M. M. Tilman (page images at HathiTrust)
• Effects of substituting cobalt for nickel on the corrosion resistance of two types of stainless steel / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by M. M. Tilman (page images at HathiTrust)
• Electrolytic manganese in stainless steel : tests at the Timken Roller Bearing Co., Canton, Ohio / ([Washington, D.C.] : United States Bureau of Mines, 1947), by F. Sillers and R. T. C. Rasmussen (page images at HathiTrust)
• Interdiffusion between Uranium-5 w/o fissium alloy and type 304 stainless steel / (Argonne, III. : Argonne National Laboratory, 1964), by C. M. Walter, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. Metallurgy Division. ANL (page images at HathiTrust)
• The Sulfex process : terminal development report / (Richland, Wash. : U.S. Atomic Energy Commission, 1960), by F. D. Fisher, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)
• A flux-free method for joining aluminum to stainless steel / (Richland, Wash. : U.S. Atomic Energy Commission, 1961), by L. C. Lemon, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Dissimilar metal welds of certain superalloys and stainless steels / (Richland, Wash. : Hanford Atomic Products Operation, 1963), by R. L. Knecht, U.S. Atomic Energy Commission. AEC research and development report, U.S. Atomic Energy Commission. TID., U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• The corrosion resistance of various stainless steels in aqueous solutions in the pressure of dowex #50 resin / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1950), by Arnold R. Olsen, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Reactor Technology Division (page images at HathiTrust)
• Decontamination of stainless steel / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1955), by David Owen Campbell, U.S. Atomic Energy Commission, and Chemical Development Section Oak Ridge National Laboratory Chemical Technology Division (page images at HathiTrust)
• Thorex pilot plant corrosion studies. (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1959), by J. L. English and U.S. Atomic Energy Commission (page images at HathiTrust)
• Thorex pilot plant corrosion studies. (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1960), by J. L. English, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Development Engineering Division (page images at HathiTrust)
• Carburization and chemical treatments for recovery of uranium from stainless steel fuel elements / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by R. E. Adams, E. S. Bomar, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Development of the Sulfex process for decladding stainless-steel-clad power reactor fuel elements with sulfuric acid / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1959), by A. H. Kibbey, J. H. Goode, W. E. Clark, J. R. Flanary, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section B. (page images at HathiTrust)
• The effect of irradiation on the corrosion on type 347 stainless steel by uranyl sulfate solutions / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1957), by F. H. Sweeton, H. O. Day, M. D. Silverman, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemistry Division (page images at HathiTrust)
• Nuclear analyses of the N.S. Savannah reactor with Zircaloy or stainless steel as fuel-element containers / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1962), by E. E. Gross, B. W. Colston, M. L. Winton, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Evaluation of the boron content in fuel plates fabricated for the first core loading of the Army SM-1 Reactor, formerly APPR-1 / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1962), by Julian H. Cherubini, R. J. Beaver, C. F. Leitten, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• Sulfex-thorex and darex-thorex processes for the dissolution of consolidated edison power reactor fuel : laboratory development / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1960), by L. M. Ferris, A. H. Kibbey, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory Chemical Technology Division Chemical Development Section B. (page images at HathiTrust)
• Design and testing of a teflon lined plug valve : period of work: April 29, 1948 - August 9, 1948 / (Oak Ridge, Tenn., U.S. Atomic Energy Commission. Technical Information Division, 1950), by C. D. Watson, G. A. West, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fuel rod experience during the Spert I destructive test series with a stainless steel clad, rod-type core / ([Idaho Falls, Idaho] : Idaho Operations Office, U.S. Atomic Energy Commission, 1965), by J. Dugone, D. D. Wieland, Phillips Petroleum Company. Atomic Energy Division, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Effects of gas corrosion and aging on ML-1 turbine alloys / (Washington, D. C. : U.S. Dept. of Commerce, Office of Technical Services, 1962), by B. E. Farwell, J. S. Brunhouse, and Aerojet-General Corporation Aerojet-General Nucleonics (page images at HathiTrust)
• Effectiveness of various solutions for decontaminating stainless steel, lead and glass / ([Idaho Falls, Idaho] : Idaho Operations Office, U.S. Atomic Energy Commission, 1956), by John B. Huff, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Corrosion of type 316 ELC stainless steel in fluoride-bearing zirconium process wastes / ([Idaho Falls, Idaho] : Idaho Operations Office, U.S. Atomic Energy Commission, 1959), by T. L. Hoffman, C. M. Slansky, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Effect of dissolved stainless steel components on vapor-liquid equilibria in aqua-regia / ([Idaho Falls, Idaho] : Idaho Operations Office, U.S. Atomic Energy Commission, 1959), by Bernice E. Paige, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Corrosion of alloys in various ICPP decontamination solutions / ([Idaho Falls, Idaho] : Idaho Operations Office, U.S. Atomic Energy Commission, 1961), by T. L. Hoffman, G. S. Adams, Phillips Petroleum Company. Atomic Energy Division, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Stainless steel process wastes. (Idaho Falls, Idaho : U.S. Atomic Energy Commission, Idaho Operations Office, 1960), by Milton E. McLain, D. W. Rhodes, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Corrosion in neutralized radioactive waste / (Idaho Falls, Idaho : U.S. Atomic Energy Commission, Idaho Operations Office, 1960), by N. D. Stolica, G. S. Adams, Idaho National Reactor Testing Station, Idaho Chemical Processing Plant. Chemical Development Branch, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Stainless steel wastes. (Idaho Falls, Idaho : U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by Kenneth T. Faler, D. Richard Anderson, Phillips Petroleum Company. Atomic Energy Division, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant. Chemical Development Branch (page images at HathiTrust)
• Stainless steel wastes. ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1962]), by D. Richard Anderson, D. W. Rhodes, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Thermal decomposition of hydrated iron, chromium, and nickel nitrates and their mixtures / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, 1962), by E. M. Vander Wall, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Corrosion evaluation of stainless steels exposed in ICPP high-level radioactive waste tanks / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, 1962), by T. L. Hoffman, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Experimental results of potentially destructive reactivity additions to an oxide core / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, 1964), by J. E. Barry, J. E. Grund, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Corrosion of type 316 stainless steel in NaK service : a literature survey / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, 1965), by C. A. Zimmerman, Idaho Chemical Processing Plant, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Damage to stainless steel fuel in SPERT reactors / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1961]), by R. E. Heffner, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Thermal expansion of alloys of the "stainless iron" type / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1928), by Peter Hidnert, W. T. Sweeney, and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust)
• Thermal expansion of nickel, monel metal, stellite, stainless steel, and aluminum / ([Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1921]), by Wilmer Henry Souder, Peter Hidnert, and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust)
• The tensile strength of brazed stainless steel joints / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1955), by H. A. Saller, H. L. Klebanow, J. T. Stacy, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The dissolution of zirconium and corrosion of stainless steel in sulfuric acid and nitric-hydrofluoric acid mixtures / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1955), by R. H. J. Gercke, Darrell Lewis, California Research and Development Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• High temperature testing of type 316 stainless steel sheet : final report / (Buffalo, NY., Cornell Aeronautical Laboratory, inc., 1951), by G. J. Guarnieri, Union Carbide and Carbon Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion of xenon through aluminum and stainless steel / (Upton, N.Y. : Brookhaven National Laboratory, 1960), by A. W. Castleman, A. M. Eshaya, F. E. Hoffmann, U.S. Atomic Energy Commission, Brookhaven National Laboratory, and Inc Associated Universities (page images at HathiTrust)
• Chemical decladding of stainless steel fuel elements in a stainless steel dissolver : progress report no. 1 / (Upton, N.Y. : Brookhaven National Laboratory, 1962), by Herbert M. Katz, U.S. Atomic Energy Commission, and Brookhaven National Laboratory (page images at HathiTrust)
• Fluidized bed reprocessing of stainless steel clad UO₂ power reactor fuels / (Upton, N.Y. : Brookhaven National Laboratory, 1965), by C. B. Bartlett, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Heat transfer to boiling water forced through a uniformly heated tube / (Argonne, Ill. : Argonne National Laboratory, Reactor Engineering Division, 1954), by J. F. Mumm, U.S. Atomic Energy Commission. ANL., Argonne National Laboratory. ANL., and Argonne National Laboratory (page images at HathiTrust)
• Laboratory simulations of cladding-steam reactions following loss-of-coolant accidents in water-cooled power reactors / by James C. Hesson... [et al] (Lemont, Ill. : Argonne National Laboratory, Reactor Engineering Division, 1970), by Charles Barnes, Kazuo Nishio, Richard E. Wilson, Richard O. Ivins, James C. Hesson, U.S. Atomic Energy Commission, and Argonne National Laboratory. Reactor Engineering Division (page images at HathiTrust)
• Corrosion of stainless steels by water boiler reactors fuels / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1964), by Harold M. Busey, Ralph H. Perkins, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Electrodecontamination of stainless steel / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1954), by M. R. Bennett, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Behavior of oxide aerosols of uranium and stainless steel in humid atmospheres / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1968), by W. D. Yuille, R. E. Adams, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The friction index and pressing characteristics of spherical stainless steel powder and oxidized copper powder / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1967), by Haskell Sheinberg, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stainless steel university reactor / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, [1954]), by W. E. Kinney, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• The corrosion of nitrided stainless steels in degassed and oxygenated water / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1952), by H. A. Pray, R. S. Peoples, Battelle Memorial Institute, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Solubility of the products of corrosion of stainless steel in 600 F water / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1953), by H. A. Pray, Elmer F. Stephan, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Corrosion of stainless steels in supercritical water / (Columbus, Ohio : Battelle Memorial Institute, 1954), by H. A. Pray, Walter K. Boyd, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Vapor deposition of molybdenum and niobium coatings on stainless steel tubes / (Columbus, OH : Battelle Memorial Institute, [1957]), by Ivor E. Campbell, Robert B. Palmer, Danny M. Rosenbaum, Carroll F. Powell, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• The corrosion of type 347 stainless steel in boiling digest liquors / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce, [1958]), by Frederick W. Fink, Oliver M. Stewart, Walter J. Braun, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Effects of irradiation on stainless steel-clad UO₂ pellets in helium or carbon dioxide / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1959]), by Gerald E. Lamale, Ronald F. Dickerson, John E. Gates, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Corrosion of stainless alloys in high-temperature nitrogenous environments / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1959]), by Ward S. Diethorn, Donald L. Keller, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Experiments to determine the radiation stability of UN dispersions in stainless steel / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, 1960), by Ronald F. Dickerson, James H. Saling, David G. Freas, John E. Gates, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Effects of large neutron doses and elevated temperature on Type 347 stainless / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, 1963), by Ronald F. Dickerson, Robert Lieberman, Frederic R. Shober, William E. Murr, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Annealing studies on irradiated Type 347 stainless / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, 1963), by William E. Murr, Frederic R. Shober, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effect of simulated in-reactor annealing on an irradiated Type 347 stainless steel pressure tube / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, 1964), by Mihkel Kangilaski, John E. Gates, Frederic R. Shober, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The mechanism of stress corrosion in stainless steels : final report, May 15, 1959 to May 15, 1960 / (Chicago, Ill. : Armour Research Foundation, Illinois Institute of Technology, 1962), by Jacob M. Miller, U.S. Atomic Energy Commission, Armour Research Foundation (U.S.), and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Protective coatings for high-temperature metal alloys / (Columbus, Ohio. : Battelle Memorial Institute, 1952), by Cameron G. Harman, Loran S. O'Bannon, E. F. Fowler, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust; US access only)
• Stress-corrosion cracking of 17-4 PH stainless steel / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1962]), by Raymond P. Jackson, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Irradiation of tandem-extruded joints between zircaloy and stainless steel / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1963), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Dissolution of zirconium alloy fuels in 309SCb stainless steel vessels / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1964), by Edward S. Occhipinti, V. P. Caracciolo, J. Harding Owen, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Thermal fatigue tests : materials of construction for denitrator pots / (Aiken, South Carolina : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1964), by Louis P. Costas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Corrosion of stainless steel in thorex process solutions / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1959]), by Patricia M. Kranzlein, J. A. Snyder, M. L. Holzworth, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Corrosion of stainless steel in HNO₃-HF solutions / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1960]), by Patricia M. Kranzlein, Carl L. Angerman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Mechanical properties of irradiated welds in stainless steel / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1960]), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stainless steel failures in Savannah River Plant reactor areas / (Aiken, S. C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1960]), by Robert H. McKane, John W. Wade, Hugh C. Minton, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Mechanical properties of irradiated stainless steels : a compilation of data in the literature / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1961]), by Richard E. Schreiber, Erminia U. Kauer, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Electron metallography of an irradiated stainless steel nozzle / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1961]), by Carl L. Angerman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Relaxation of torsional stresses in stainless steel during irradiation / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1962]), by Richard E. Schreiber, U.S. Atomic Energy Commission, and Savannah River Laboratory (page images at HathiTrust)
• Stress-corrosion cracking of stainless steel : a literature search / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Savannah River Laboratory [available from the Office of Technical Services, Washington, 1962]), by Myra S. Feldman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Corrosion by solutions containing HNO₃, HF, and reducing agents / ([Aiken, S.C.] : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1958]), by M. LaVern Holzworth, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Fabrication studies of clad copper matrix boride dispersion control materials / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Office of Technical Information, [1960]), by K. C. Antony, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A simulated superheat reactor corrosion facility / ([San Jose, Calif. : General Electric Co, Atomic Energy Equipment Dept. ; Oak Ridge, Tenn.. : USAEC Division of Technical Information Extension, 1961]), by M. D. Fitzsimmons, M. Siegler, W. L. Pearl, U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department (page images at HathiTrust)
• Corrosion of type 304 stainless steel in simulated superheat reactor environments / ([San Jose, Calif. : General Electric Co, Vallecitos Atomic Laboratory ; Oak Ridge, Tenn.. : USAEC Division of Technical Information Extension, 1961]), by G. G. Gaul, W. L. Pearl, U.S. Atomic Energy Commission, and Vallecitos Atomic Laboratory (page images at HathiTrust)
• Examination of 304 stainless steel cladding from cold-swaged and rolled fuel rods / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Division of Technical Information, 1962), by W. V. Cummings, R. E. Blood, D. R. Lewis, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Erosion flow testing of purposely defected stainless steel clad compacted UO₂ powder fuel / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Division of Technical Information, 1962), by J. W. Lingafelter, R. J. Seely, E. A. Lees, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stress corrosion of type 304 stainless steel in simulated superheat reactor environments / ([Oak Ridge, Tenn. : USAEC Division of Technical Information Extension, 1962]), by G. G. Gaul, W. L. Pearl, U.S. Atomic Energy Commission, and Vallecitos Atomic Laboratory (page images at HathiTrust)
• Evaluation of 300 series stainless steel tubing for fuel cladding / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Division of Technical Information, 1962), by R. F. Kirby, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Evaluation of discontinuities in a stainless steel weldment with radiographic and ultrasonic techniques / (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Union Carbide Nuclear Company, 1960), by F. J. Lambert, P. J. Long, Oak Ridge Y-12 Plant, Union Carbide Nuclear Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Properties of lithium hydride-V : corrosion of austenitic stainless steels in molten LiH / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation., 1961), by F.H. Welch, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• The combined effects of temperature and irradiation on the mechanical properties of austenitic stainless steels / (Richland, Wash. : Pacific Northwest Laboratory, 1965), by R. G. Hoagland, A. L. Bement, J. E. Irvin, U.S. Atomic Energy Commission, and Pacific Northwest Laboratory (page images at HathiTrust)
• The stability and properties of alloy steels at elevated temperatures : a literature survey / (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Division of Technical Information ;, 1960), by M. T. Simnad, U.S. Atomic Energy Commission, and General Dynamics Corporation (page images at HathiTrust)
• Evaluation of ferritic substitutes for the austenitic stainless steels. (Schenectady, N.Y. : Knolls Atomic Power Laboratory ;, 1954), by E. G. Brush, R. F. Koenig, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion studies : I. the permeability of type 347 stainless steel to hydrogen and tritium / (Schenectady, New York : Knolls Atomic Power Laboratory, 1953), by D. Randall, O. N. Salmon, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Electrical contact resistance between sodium and stainless steel / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1956), by L. B. Vandenberg, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Structural analysis of a reflux pool-boiler solar receiver / (Albuquerque, New Mexico : Sandia National Laboratories ;, 1991), by Edward L. Hoffman, Charles M Stone, Sandia National Laboratories, and Sandia Laboratories (page images at HathiTrust)
• Nitriding of type 304 stainless steel in a sodium-nitrogen system / (Canoga Park, California : Atomics International, [1961]), by J. J. Gill, J. C. Bokros, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Welding type 410 stainless steel to Inconel / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1960), by J. D. Carey, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Rate of alloying of uranium alloys with stainless steel. (Canoga Park, California : Atomics International, [1960]), by R. S. Neymark, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Simplified formulas and curves for bellows analysis /, by R.A. Winborne, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• Cyclotron irradiation damage of thorium, stainless steel, and zirconium /, by F. E. Bowman, C.J Meechan, F.L Fillmore, R.R Eggleston, A Andrew, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• Some high temperature mechanical properties of zircaloy-2, type 304 stainless steel, and AM-350 stainless steel / (Canoga Park, California : Atomics International, [1965]), by D. H. Stone, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Mechanical properties of steels for sodium service / (Canoga Park, California : Atomics International, [1960]), by W. J. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Analysis of fueled irradiation capsules which failed in the materials testing reactor / (Canoga Park, California : Atomics International, [1961]), by D. G. Harrington, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Corrosion studies on 304 stainless steel containing one percent boron-10 /, by F. E. Butler, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)
• Developments in stainless-steel welding in the nuclear program : a monograph /, by E. B. LaVelle, E. M. Kuchera, L. H. Rasmussen, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Behavior of highly restrained partial penetration welds in austentic stainless steel /, by P. N. Seran, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Thermal fatigue testing of selected dissimilar metal welds /, by B. D. Hackney, C. J. McDaniel, A. M. Hubbard, P. J. Herbert, U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department (page images at HathiTrust)
• Solubility of hydrogen isotopes in nickel and type 347 stainless steel /, by Norval J. Hawkins, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Determination of ferrite in type 347 stainless steel weld deposits /, by W. L. Fleischmann, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The stress-rupture strength of type 347 stainless steel under cyclic temperature / (Schenectady, New York : Knolls Atomic Power Laboratory, 1954), by E. E. Baldwin, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion studies. (Schenectady, New York : Knolls Atomic Power Laboratory, 1953), by D. Randall, O. N. Salmon, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• An investigation of acoustic emission from defect formation in stainless steel weld coupons /, by C. K. Day, Battelle Memorial Institute. Pacific Northwest Division. issuing body, U.S. Atomic Energy Commission, and Pacific Northwest Laboratory (page images at HathiTrust)
• Fatigue data on precipitation-hardenable stainless steels /, by R. J Favor, W. P. Achbach, H. J. Grover, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The physical metallurgy of precipitation-hardenable stainless steels /, by D. C. Ludwigson, A. M. Hall, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Physical and mechanical properties of nine commercial precipitation-hardenable stainless steels /, by D. A Roberts, A. M. Hall, D. B. Roach, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Properties of certain cold-rolled austenitic stainless sheet steels /, by R. J. Mangone, A. M. Hall, D. B. Roach, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• High-strength-steel forgings /, by H.-J Henning, F. W. Boulger, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Design information on PH 15-7 Mo stainless steel for aircraft and missiles /, by R. J Favor, W. P. Achbach, O. L. Deel, Defense Metals Information Center (U.S.) issuing body, and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• A review of bending methods for stainless steel tubing /, by C. T Olofson and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Semiaustenitic precipitation-hardenable stainless steels /, by D. C. Ludwigson and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The emittance of stainless steels /, by W. D Wood, C. F. Lucks, H. W. Deem, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Review of recent developments in the technology of high-strength stainless steels /, by D. A Roberts and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• A discussion of the fracture toughness of several stainless steels in sheet form /, by F. J. Barone, A. M. Hall, and Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• The current status and 1970 potential of selected defense metals /, by Defense Metals Information Center (U.S.) issuing body (page images at HathiTrust)
• Report of thermal cycle testing on sample pieces of stainless steel-lined carbon steel piping /, by P. J. Herbert, C. J. McDaniel, issuing body U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department. issuing body (page images at HathiTrust)
• Experience with stainless steel as a fuel cladding material in water-cooled power reactor applications /, by T. J. Pashos, issuing body Vallecitos Atomic Laboratory, issuing body U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department. issuing body (page images at HathiTrust)
• Zircaloy-2 and type-304 stainless steel at 2000°F in water-steam for brief times /, by R. H. Leyse, issuing body Vallecitos Atomic Laboratory, issuing body U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department. issuing body (page images at HathiTrust)
• Effects of irradiation on B4C filled stainless steel tubes in the Dresden nuclear power station /, by H. E. Williamson, D. L. Zimmerman, issuing body Vallecitos Atomic Laboratory, issuing body U.S. Atomic Energy Commission, General Electric Company. Atomic Power Equipment Department. issuing body, and Dresden Nuclear Power Station (page images at HathiTrust)
• Radiation effects on the mechanical properties and microstructure of type-304 stainless steel /, by J. S. Armijo, Ursula E. Wolff, J. R. Low, issuing body Vallecitos Atomic Laboratory, issuing body U.S. Atomic Energy Commission, and General Electric Company. Atomic Power Equipment Department. issuing body (page images at HathiTrust)
• Evaluation of welded and repair-welded stainless steel for light water reactor (LWR) service : compositional effects on the sensitization of austenitic stainless steels /, by S. M Bruemmer, D. G. Atteridge, L. A. Charlot, Pacific Northwest Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Charpy toughness and tensile properties of a neutron-irradiated stainless steel submerged arc weld cladding overlay /, by W. R Corwin, R. K. Nanstad, R. G. Berggren, Oak Ridge National Laboratory. Metals and Ceramics Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust)
• Supplementary special materials bulletin no. 5-A : Metal-surfaced plywood /, by B. H. Webb, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Void formation in proton-irradiated stainless steel /, by D. W Keefer, D. Kramer, A. G. Pard, J. C. Robinson, H. H. Neely, Rockwell International. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Mechanical properties of stainless steel - UO₂ dispersion fuel elements / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1959), by W. D. Valovage, R. A. Siergiej, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust; US access only)
• Machining of stainless steels; (New York, c1951), by Metal Cutting Tool Institute (page images at HathiTrust)
• Pile-induced threshold reactions in stainless steel / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1957), by R. P. Schuman, A. C. Mewherter, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust; US access only)
• The welding of type 347 steels : the effect of various heat treatments on the notched bar impact properties of modified type 347 weld deposits /, by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• The welding of type 347 steels : the results of nitric acid and copper sulfate-sulfuric acid tests on modified type 347 weld deposits /, by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• The incidence of cracking in the welding of type 347 steels /, by Lorin K. Poole, Acros Corporation, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Reactor primary coolant system pipe rupture study method for detection of sensitization in stainless steel : progress report no. 44, April - June 1978 /, by W. L Clarke, General Electric Company, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch (page images at HathiTrust)
• Reactor primary coolant system pipe rupture study method for detection of sensitization in stainless steel : progress report no. 45, July - September 1978 / (Washington, D. C. : U.S. Nuclear Regulatory Commission, 1979), by W. L Clarke, General Electric Company, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch (page images at HathiTrust)
• Reactor primary coolant system pipe rupture study method for detection of sensitization in stainless steel : progress report no. 46, October - December 1978 / (Washington, D. C. : U.S. Nuclear Regulatory Commission, 1979), by W. L Clarke, General Electric Company, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch (page images at HathiTrust)
• Mechanistic aspects of stress-corrosion cracking of type 304 stainless steel in LWR systems /, by F. A Nichols, Argonne National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Metallurgy and Materials Research Branch (page images at HathiTrust)
• Ultrasonic and metallurgical examination of a cracked type 304 stainless steel BWR pipe weldment /, by J. Y. Park, D. S. Kupperman, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, and Argonne National Laboratory. Materials Science and Technology Division (page images at HathiTrust)
• Stainless steel : construction and engineering memorandum, no. 24 /, by Gardiner Luce and U.S. Atomic Energy Commission (page images at HathiTrust)
• Firth-Sterling S-less stainless steel... (McKeesport, Pa. : [s.n., c1923]), by McKeesport Firth-Sterling Steel Company (page images at HathiTrust)
• Study of cryogenic storage tank fatigue life : low temperature mechanical testing of AISI 304 and 310 stainless steels / (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards, 1971), by T. J. Patrician, R. E. Schramm, R. L. Durcholz, R. P. Reed, Institute for Basic Standards (U.S.). Cryogenics Division, United States. National Bureau of Standards. Technical note, and Naval Air Engineering Center (page images at HathiTrust)
• Stress corrosion cracking of austenitic stainless steel : status report, September 1, 1964 / (Aiken, S.C. : E.I. Du Pont de Nemours & Company, Savannah River Laboratory, 1965), by McIntyre R. Louthan, U.S. Atomic Energy Commission, E.I. du Pont de Nemours & Company, and Savannah River Laboratory (page images at HathiTrust; US access only)
• Evaluation of aluminum-coated wires as reinforcement for articulated concrete mattresses : report 1 : basic program / (Vicksburg, Miss. : Waterways Experiment Station, 1962), by United States. Army. Corps of Engineers. Lower Mississippi Valley Division. Materials and Concrete Laboratory and United States. Mississippi River Commission (page images at HathiTrust)
• Preliminary report on the metal powder slip casting process :, by Henry H. Hausner, Frank W. Heck, Edmund B. Wilson, Donald P. Ferriss, U.S. Atomic Energy Commission. New York Operations Office, and Penn-Texas Corporation (page images at HathiTrust)
• Electrodes for welding type 347 stainless steel : summary report /, by T.J. Moore, Russell B. Gunia, U.S. Atomic Energy Commission. New York Operations Office, Arcos Corporation, and U.S. Atomic Energy Commission. Division of Technical Information (page images at HathiTrust)
• Study of instantaneous collapse and creep buckling characteristics of large SGR process tubes / (Canoga Park, California : Atomics International, [1965]), by M. Lemcoe, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Determination of uranium dioxide in stainless steels by the x-ray fluorescence method / (Canoga Park, California : Atomics International, 1957), by Louis Silverman, Lavada A Moudy, William W Houk, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• An investigation of the slip-casting mechanism as applied to stainless steel powder /, by W. G. Lidman, R. V. Rubino, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Rolling 18-8 stainless steel powder in strip /, by S. Storchheim, B. Sprissler, J. Nylin, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Some properties of the heat-affected zone in arc welded type 347 stainless steel / (Schenectady, New York : Knolls Atomic Power Laboratory, 1954), by E. F. Nippes, W. L. Fleischmann, H. Wawrousek, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The self-regulation by moderator boiling in stainless steel-UO₂-H₂O reactors /, by Louise Gartner, Robert Daane, U.S. Atomic Energy Commission, and Nuclear Development Corporation of America (page images at HathiTrust)
• Integral data evaluation of stainless steel, ²³⁹Pu, ²⁴⁰Pu, and H₂O for homogeneous plutonium systems /, by Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards, D. A Kottwitz, T. J Trapp, J. K Thompson, U. P Jenquin, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, and Pacific Northwest Laboratory (page images at HathiTrust)
• The Temperature dependence of fatigue crack growth rates of A 351 CF8A cast stainlss steel in LWR environment /, by W. H Cullen, M. Kemppainen, Kari T©·orr©·onen, R. E. Taylor, Materials Engineering Associates, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Analysis of ℗Ơ-ferrite data from production stainless steel pipe welds /, by T. L. Hebble, R. K. Nanstad, G. M. Goodwin, D. P. Edmonds, D. A. Canonico, Oak Ridge National Laboratory. Metals and Ceramics Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research (page images at HathiTrust)
• Metallurgical variables affecting fracture toughness in high-strength sheet alloys /, by Carl E. Hartbower, G. M. Orner, and sponsor United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• Effect of prior creep on short-time mechanical properties of 17-7PH stainless steel : (RH 950 condition compared to TH 1050 condition) /, by Jeremy V. Gluck, J. W. Freeman, issuing body Wright Air Development Center, sponsor United States. Air Force. Air Research and Development Command, and University of Michigan. Research Institute (page images at HathiTrust)
• Stainless steel plumbing fixtures (designed for residential use) /, by issuing body United States. National Bureau of Standards (page images at HathiTrust)
• West coast markets for stainless steel industrial development. ([Olympia?, 1962]), by Washington (State). Dept. of Commerce and Economic Development. Business and Economic Research Division (page images at HathiTrust; US access only)
• Inelastic design of load carrying members,, by Omar M. Sidebottom, issuing body United States. Air Force. Systems Command. Aeronautical Systems Division, and sponsor University of Illinois (Urbana-Champaign campus). Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• The cladding and welding of stainless steel to molybdenum and niobium /, by Joseph Fugardi, John L. Zambrow, United States. Air Force. Air Research and Development Command. issuing body, Wright Air Development Center sponsor, and sponsor Sylvania-Corning Nuclear Corporation (page images at HathiTrust)
• Stainless steels : an elementary discussion., by Allegheny Ludlum Steel Corporation (page images at HathiTrust; US access only)
• Residual static strength of several titanium and stainless-steel alloys and one superalloy at -109 ̊F, and 550 ̊F / (Washington, D.C. : National Aeronautics and Space Administration, 1963), by I. E. Figge, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)

More items available under narrower terms.