The Online Books Page

Cleaning machinery and appliances

See also what's at your library, or elsewhere.

Broader terms:

Narrower terms:

Filed under: Cleaning machinery and appliances

Operator and organizational maintenance manual (including repair parts and special tools list) : cleaner, steam pressure, jet, trailer mounted, kerosene or light diesel oil fired, electric motor, 1 hp, 115 V, AC/DC, 60 C, SGLE-PH (Geranco Manufacturing Corporation, model GS-400) (4940-865-4738). ([Washington, DC] : Headquarters, Dept. of the Army, [1990]), by United States. Department of the Army (page images at HathiTrust)
Operator's, organization [i.e. organizational], direct support, and general support maintenance manual ... : cleaner, steam, pressure jet, oil fired, skid mounted, 600 gallons per hour capacity (American Kleaner Mfg. Co. Inc., model 6000-OM) (4920-00-473-6218). ([Washington, DC] : Headquarters, Dept. of the Army, [1990]), by United States. Department of the Army (page images at HathiTrust)
Operator's, organizational, direct support, and general support maintenance manual including repair parts list for cleaner, steam pressure model 200-AO (NSN 4940-00-186-0027), American Kleaner Mfg. Co., Inc. ([Washington, DC] : Headquarters, Dept. of the Army, [1990]), by United States. Department of the Army (page images at HathiTrust)
Operator's, organizational, direct support, and general support maintenance manual including repair parts list for degreaser, vapor-spray, stationary, solvent type, electrically heated, model DL-625, 4940-00-255-8246, Delta Industries. ([Washington, DC] : Headquarters, Dept. of the Army, [1981]), by United States. Department of the Army (page images at HathiTrust)
Operator, organizational, direct support, & general support maintenance manual including repair parts list for cleaner, steam pressure, jet, skid mounted, model RI 2400 (NSN 4940-00-186-0027). ([Washington, DC] : Headquarters, Dept. of the Army, [1990]), by United States. Department of the Army (page images at HathiTrust)
Impact cleaning, (Cleveland, O. : The Penton Pub. Co., 1939), by William A. Rosenberger (page images at HathiTrust; US access only)
MTDC portable vehicle washer : interim report / ([Missoula, Mont.] : USDA Forest Service, Missoula Technology & Development Center, [2002]), by Andy Trent, Scott Gilmour, Dick Karsky, and Technology & Development Program (U.S.) (page images at HathiTrust)
Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04 / (Reston, Va. : U.S. Dept. of the Interior, U.S. Geological Survey ; Denver, CO : For sale by USGS Information Services, 2005), by Robert F. Breault, Jason R. Sorenson, Kirk P. Smith, Geological Survey (U.S.), New Bedford (Mass.), Massachusetts. Dept. of Environmental Protection, and United States. Environmental Protection Agency (page images at HathiTrust)
MTDC portable vehicle washer / ([Missoula, Mont.] : U.S. Dept. of Agriculture, Forest Service, Technology & Development Program, [2004]), by Andy Trent and Technology & Development Program (U.S.) (page images at HathiTrust)
Preliminary job descriptions for the cleaning, dyeing & pressing industry. (St. Paul : [publisher not identified], 1937), by United States Employment Service (page images at HathiTrust)

Filed under: Dishwashing machines

Catalogue. ([Cleveland, Ohio., 1892]), by Cleveland Rewell-Low manufacturing company (page images at HathiTrust)
Some Whirlpool undercounter dishwasher models need to be modified to prevent fires. (Washington, D.C. : U.S. Consumer Product Safety Commission, [1988]), by U.S. Consumer Product Safety Commission (page images at HathiTrust)
Evaluation of dishwashing systems in food service establishments / (Washington, D.C. : Agricultural Research Service, U.S. Dept. of Agriculture, 1973), by John F. Freshwater and Daniel M. Steckler (page images at HathiTrust)
Dishwashing / (Washington : The Service : For sale by the the Supt. of Docs., U.S. Govt. Print. Off., 1968), by United States. Federal Supply Service (page images at HathiTrust)
Dishwashing / (Washington : FSS : For sale by the the Supt. of Docs., U.S. Govt. Print. Off., 1971), by United States. Federal Supply Service (page images at HathiTrust)
Selecting and using food waste disposers, trash compactors, and dishwashers / (Urbana, Ill. : University of Illinois at Urbana-Champaign, College of Agriculture, Cooperative Extension Service, 1976), by Jacqueline Anderson (page images at HathiTrust; US access only)
Electric dishwashing in the modern home. (St. Paul, Minn., [195-]), by inc Economics Laboratory (page images at HathiTrust)
Dishwashing booklet. ([Washington, D.C.?] : General Services Administration, Federal Supply Service, 1981), by United States. Federal Supply Service (page images at HathiTrust)
A study of hand versus mechanical dishwashing methods / (Wooster, Ohio : Ohio Agricultural Experiment Station, 1956), by Elaine Knowles Weaver, Clarice E. Bloom, and Ilajean Feldmiller (page images at HathiTrust; US access only)
Modern kitchens designed with new appreciation of mechanical dishwashing with the Walker electric dishwasher sink : manufactured by Walker Dishwasher Corporation, Syracuse, N.Y. ([Syracuse] : [The Corp.], ©1928), by Walker Dishwasher Corporation (page images at HathiTrust; US access only)

Filed under: Dry-cleaning machines

Code of fair competition for the laundry and dry cleaning machinery manufacturing industry as approved on October 3, 1933 by President Roosevelt. (Washington, D.C. : United States Government Printing Office, 1933), by United States National Recovery Administration (page images at HathiTrust)
Drycleaning machinery from the Federal Republic of Germany : determination of the Commission in investigation no. 751-TA-9 under the Tariff Act of 1930, together with the information obtained in the investigation. (Washington, DC : U.S. International Trade Commission, [1984]), by United States International Trade Commission (page images at HathiTrust)
Drycleaning machinery from West Germany : determination of injury in investigation no. AA1921-99 under the Antidumping Act, 1921, as amended. (Washington, DC : United States Tariff Commission, 1972), by United States Tariff Commission (page images at HathiTrust)

Filed under: Exhaust systems

Validation of a recommended approach to recirculation of industrial exhaust air. (Cincinnati : Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1979), by National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering, Lawrence F. Bullock, Zhag S. Hakobean, inc. Environmental Research Center Rexnord, and Inc Arthur D. Little (page images at HathiTrust)
Airborne noise control for vertically stacked bathrooms with mechanical exhaust systems / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service Forest Products Laboratory, [1972]), by Robert Earl Jones, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
Design of a bleed system for a Mach 3.5 inlet / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by J. Syberg, T. E. Hickcox, Ames Research Center, and Boeing Company (page images at HathiTrust)
A recommended approach to recirculation of exhaust air / (Cincinnati, Ohio : Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1978), by Lawrence J. Partridge and National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering (page images at HathiTrust)
Evaluation of technology for control of arsenic emissions at the Campbell Red Lake Gold Smelter / (Cincinnati, Ohio : Industrial Environmental Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency ; Springfield, Va. : Available to the public through the National Technical Information service, 1980), by G. H. Marchant, Richard L. Meek, Ohio). Industrial Pollution Control Division Industrial Environmental Research Laboratory (Cincinnati, and Ohio) Industrial Environmental Research Laboratory (Cincinnati (page images at HathiTrust)
Recirculation of exhaust air : proceedings of a seminar held October 23-24, l975 and presentation of a criteria for recirculation of exhaust air. (Cincinnati, Ohio : U.S. Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1976), by Cincinnati Seminar on Recirculation of Exhaust Air, William J. Development of criteria for recirculation of exhaust air Astleford, Research Triangle Institute, National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering, and Southwest Research Institute (page images at HathiTrust)
Specifications for the construction of local exhaust systems. (New York, N.Y. : New York Operations Office, Health and Safety Division - Ney York Operations Office, 1951), by W. B. Harris and U.S. Atomic Energy Commission (page images at HathiTrust)
Maintenance and the automobile exhaust / (New York : Society of Automotive Engineers, 1959), by W. S. Fagley, C. M. Heinen, M. V. Sink, and Society of Automotive Engineers (page images at HathiTrust; US access only)
The application of Vanadia-Alumina catalysts for the oxidation of exhaust hydrocarbons / (New York : Society of Automotive Engineers, 1959), by William A. Cannon, C. E. Welling, and Society of Automotive Engineers (page images at HathiTrust; US access only)
Evaluation of air cleaning and monitoring equipment used in recirculation systems / (Cincinnati, Ohio : U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington, D.C. : For sale by the Supt. of Docs., U.S. G.P.O., 1981), by Mark L. Holcomb, Robert C. Scholz, inc. Environmental Research Center Rexnord, and National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering (page images at HathiTrust)
Catalytic oxidation of automobile exhaust gases : an evaluation of the Houdry Catalyst / (New York : Society of Automotive Engineers, 1959), by G. J. Nebel, R. W. Bishop, and Society of Automotive Engineers (page images at HathiTrust; US access only)
The recirculation of industrial exhaust air : proceedings of a symposium sponsored by the National Institute for Occupational Safety and Health at Cincinnati, Ohio ... October 1977. (Cincinnati, Ohio : Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1978), by National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering (page images at HathiTrust)
Recirculation of exhaust air : proceedings of a seminar held October 23-24, 1975 (Cincinnati, Ohio : U.S. Dept. of Health, Education, and Welfare, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health, Division of Physical Sciences and Engineering ; Washington : For sale by the Supt. of Docs., U.S. Govt. Print. Off, 1976), by Seminar on Recirculation of Exhaust Air (1975 : Cincinnati), William J. Development of criteria for recirculation of exhaust air Astleford, Southwest Research Institute, Research Triangle Institute, and National Institute for Occupational Safety and Health. Division of Physical Sciences and Engineering (page images at HathiTrust)
Summary of trade and tariff information : fan, blowers, compressors, air pumps and vacuum pumps, and air-conditioning and refrigeration machines : TSUS items 661.05-661.22, 661.35-661.37. (Washington, DC : U.S. International Trade Commission, [1984]), by Dennis A. Fravel and United States International Trade Commission (page images at HathiTrust)
Static test-stand performance of the YF-102 turbofan engine with several exhaust configurations for the Quiet Short-haul Research Aircraft (QSRA) / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Jack G. McArdle, Allan S. Moore, Leonard Homyak, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Analysis and documentation of QCSEE (quiet clean short-haul experimental engine) over-the-wing exhaust system development / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by R. C. Ammer, J. T. Kutney, General Electric Company, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Tentative recommended good practice code and handbook on the fundamentals of design, construction, operation, and maintenance of exhaust systems; ([Chicago, c1938]), by American Foundrymen's Society. Industrial hygiene codes committee (page images at HathiTrust)
Exhaust hoods. (New York, Industrial Press, [1952]), by J. M. DallaValle (page images at HathiTrust)
Truck noise IV-G. Field test results on a heavy duty, diesel truck having reduced noise emissions. Seventh report. (1975), by J. T. Shrader (page images at HathiTrust)
Specifications for the construction of local exhaust systems. [Abstract] (Oak Ridge, Tenn., U. S. Atomic Energy Commission, Technical Information Service, 1948), by W. B. Harris and U.S. Atomic Energy Commission (page images at HathiTrust)
Truck noise IV-B: identifying the sources of noise on a heavy duty, diesel truck. (1975), by J. T. Shrader (page images at HathiTrust)
Should you have the air ducts in your home cleaned? (Washington, DC : U.S. Environmental Protection Agency, Indoor Environments Division, Office of Air and Radiation : For sale by the U.S. G.P.O., Supt. of Docs., [1997]), by United States. Environmental Protection Agency. Office of Air and Radiation (page images at HathiTrust)
Truck noise XI. Evaluation and reduction of heavy-duty truck noise. Final report. (1976), by V. Alan Werner and William Boyce (page images at HathiTrust)

Filed under: Air ducts

American tentative standard code for pressure piping: power, gas and air, oil, district heating. Approved by American standards association, June, 1935. (New York, N.Y., [1935]), by American Society of Mechanical Engineers and American Standards Association (page images at HathiTrust; US access only)
Airborne noise control for vertically stacked bathrooms with mechanical exhaust systems / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service Forest Products Laboratory, [1972]), by Robert Earl Jones, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
Mean-flow measurements of the flow field diffusing bend / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Oden J. McMillan, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Nielsen Engineering & Research, and Lewis Research Center (page images at HathiTrust)
Evaluation of a hemispherical head flow direction sensor for inlet duct measurements / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Donald L. Bennett and Flight Research Center (U.S.) (page images at HathiTrust)
Use of potential flow theory to evaluate subsonic inlet data from a simulator-powered nacelle at cruise conditions / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Lawrence J. Bober and Lewis Research Center (page images at HathiTrust)
Analysis of the dynamic response of a supersonic inlet to flow-field perturbations upstream of the normal shock / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Gary L. Cole, Ross G. Willoh, and Lewis Research Center (page images at HathiTrust)
Experimental investigation of a Mach 6 fixed-geometry inlet featuring a swept external-internal compression flow field / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Marvin G. Torrence and Langley Research Center (page images at HathiTrust)
Streamline curvature design procedure for subsonic and transonic ducts / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Raymond L. Barger and Langley Research Center (page images at HathiTrust)
A parametric study of effect of forebody shape on flow angularity at Mach 8 / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Charles B. Johnson, Don C. Marcum, and Langley Research Center (page images at HathiTrust)
Flight-measured inlet pressure transients accompanying engine compressor surges on the F-111A airplane / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Jack Nugent, Jon K. Holzman, and Flight Research Center (U.S.) (page images at HathiTrust)
Combined quadrupole-dipole model for inlet flow distortion noise from a subsonic fan / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Marvin E. Goldstein, Thomas F. Gelder, James H. Dittmar, and Lewis Research Center (page images at HathiTrust)
An empirical formula for calculating gamma-ray dose attenuation in concrete ducts / (Port Hueneme, Calif. : Naval Civil Engineering Laboratory, 1964), by W. C. Ingold and C. M. Huddleston (page images at HathiTrust)
Terminal-shock and restart control of a Mach 2.5, axisymmetric, mixed compression inlet with 40 percent internal contraction / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1974), by Robert J. Baumbick, Robert C. Seidel, Robert E. Wallhagen, and Lewis Research Center (page images at HathiTrust)
Pressure distributions for a rectangular supersonic inlet at subsonic speeds / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1976), by Dennis E. Fuller and Langley Research Center (page images at HathiTrust)
Low-speed wind-tunnel investigation of the aerodynamic and acoustic performance of several sonic inlet takeoff and approach geometries / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1976), by John M. Abbott, Richard L. Golladay, and Lewis Research Center (page images at HathiTrust)
Velocity gradient method for calculating velocities in an axisymmetric annular duct / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Theodore Katsanis and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Distortion in a full-scale bicone inlet with internal focused compression and 45 percent internal contraction / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Joseph F. Wasserbauer, Robert J. Shaw, Harvey E. Neumann, and Lewis Research Center (page images at HathiTrust)
Low-speed wind-tunnel investigation of the aerodynamic and acoustic performance of a translating-grid choked-flow inlet / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by John M. Abbott, Richard L. Golladay, Brent A. Miller, and Lewis Research Center (page images at HathiTrust)
FORTRAN program to generate engine inlet flow contour maps and distortion parameters / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by John H. Dicus and Lewis Research Center (page images at HathiTrust)
A method for determining acoustic-liner admittance in ducts with sheared flow in two cross-sectional directions / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Willie R. Watson and Langley Research Center (page images at HathiTrust)
Static investigation of circular-to-rectangular transition ducts for high-aspect-ratio nonaxisymmetric nozzles / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1986), by James R. Burley, John R. Carlson, Linda S. Bangert, and Langley Research Center (page images at HathiTrust)
Analog computer implementation of four instantaneous distortion indices / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by William G. Costakis and Lewis Research Center (page images at HathiTrust)
Terminal-shock and restart control of a Mach 2.5, mixed-compression inlet coupled to a turbofan engine / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Robert J. Baumbick, Carl J. Daniele, Peter G. Batterton, and Lewis Research Center (page images at HathiTrust)
Theoretical surface velocity distributions on acoustic splitter geometries for an engine inlet / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by James A. Albers, Douglas C. Breunlin, and Lewis Research Center (page images at HathiTrust)
Model investigation of inlet plenum flow straightening techniques for altitude test facility / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1976), by Stephen M. Riddlebaugh, Heinz G. Linke, and Lewis Research Center (page images at HathiTrust)
Effect of design changes on aerodynamic and acoustic performance of translating centerbody sonic inlets / ([Washington] : National Aeronoautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Office, 1978), by Brent A. Miller and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
Performance of vortex generators in a Mach 2.5 low-bleed full-scale 45-percent-internal-contraction axisymmetric inlet / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Harvey E. Neumann, Robert J. Shaw, Joseph F. Wasserbauer, and Lewis Research Center (page images at HathiTrust)
Circumferentially segmented duct liners optimized for axisymmetric and standing-wave sources / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Willie R. Watson and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Analysis of pressure distortion testing / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by K. E. Koch, R. L. Rees, General Electric Company, and Lewis Research Center (page images at HathiTrust)
Isolated rotor noise due to inlet distortion or turbulence / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1974]), by Ramani Mani, Lewis Research Center, and General Electric Company (page images at HathiTrust)
Analytical investigation of fan tone noise due to ingested atmospheric turbulence / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1980), by Ulrich W. Ganz, Langley Research Center, and Boeing Commercial Airplane Company (page images at HathiTrust)
Acoustic theory of axisymmetric multisectioned ducts / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by W. E. Zorumski and Langley Research Center (page images at HathiTrust)
Study of noise sources in a subsonic fan using measured blade pressures and acoustic theory / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]), by Donald B. Hanson, Langley Research Center, and United Technologies Corporation. Hamilton Standard Division (page images at HathiTrust)
Experimental evaluation of a Mach 3.5 axisymmetric inlet / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]), by J. Syberg, J. L. Koncsek, Ames Research Center, and Boeing Commercial Airplane Company (page images at HathiTrust)
Study of noise and inflow distortion sources in the NASA QF-1B fan using measured blade and vane pressures / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Donald Hanson and United States National Aeronautics and Space Administration (page images at HathiTrust)
Three-dimensional compressible turbulent computations for a diffusing S-duct / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by C. F. Smith, Lewis Research Center, and Inc Sverdrup Technology (page images at HathiTrust)
Three-dimensional compressible turbulent computations for a nondiffusing S-duct / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by G. J. Harloff, Lewis Research Center, and Inc Sverdrup Technology (page images at HathiTrust)
General design method for three-dimensional potential flow fields / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Techincal Information Service, 1980-1985), by John D. Stanitz and Lewis Research Center (page images at HathiTrust)
A mathematical analysis of supersonic inlet dynamics / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1968), by Ross G. Willoh, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
Optimal one-section and two-section circular sound-absorbing duct liners for plane-wave and monopole sources without flow / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by Harold C. Lester, Joe W. Posey, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Ueber den Brummkreisel und das Schwingungsgesetz der kubischen Pfeifen. (Breslau [n.p.], 1850), by Karl Friedrich Julius Sondhauss (page images at HathiTrust)
Heating and air conditioning ducts encased in and under concrete slabs-on-ground. (Washington, National Academy of Sciences-National Research Council, 1961), by National Research Council (U.S.). Building Research Advisory Board (page images at HathiTrust)
Performance of square-edged orifices and orifice-target combinations as air mixers / (Washington : U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1967), by T K. Faison, Paul R. Achenbach, and Joseph C. Davis (page images at HathiTrust)
Scattering of cobalt-60 gamma radiation in air ducts / (Washington : U.S. Dept. of Commerce, Office of Technical Services, 1960), by Charles Eisenhauer (page images at HathiTrust)
Performance of louvered devices as air mixers / ([Washington] : U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1970), by T. K. Faison, Paul R. Achenbach, and Joseph C. Davis (page images at HathiTrust)
Drainage et ventilation [ressource électronique] : extrait du rapport du Conseil d'hygiène de la province de Québec pour 1895. ([S.l. : s.n., 1896?]), by Québec (Province) Conseil d'hygiène (page images at HathiTrust)
Investigation of shock : boundary-layer interaction on the spike of a conical-spike nose inlet / (Washington, D.C. : National Advisory Committee for Aeronautics, 1957), by George A. Wise, William H. Sterbentz, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Effect of centerbody boundary-layer removal near the throat of three conical nose inlets at mach 1.6 to 2.0 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Emil J. Kremzier, George A. Wise, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Development of flow distortions in a full-scale nacelle inlet at mach numbers 0.63 and 1.6 to 2.0 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by Thomas G. Piercy, Bruce G. Chiccine, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
An inlet design concept to reduce flow distortion at angle of attack / (Washington, D.C. : National Advisory Committee for Aeronautics, 1957), by Carl F. Schueller, Leonard E. Stitt, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Investigation of intake ducts for a high-speed subsonic jet-propelled airplane / (Washington, D.C. : National Advisory Committee for Aeronautics, 1947), by Herbert N. Cohen, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Design of two-dimensional channels with prescribed velocity distributions along the channel walls. (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by John D. Stanitz and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Thermal decomposition of ventilation ducting / (Washington, D.C. : United States Dept. of the Interior, Bureau of Mines, 1990), by Margaret R. Egan (page images at HathiTrust)
Primary gas toxicities and smoke particle characteristics during combustion of mine ventilation ducts : development of a test parameter / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1989), by Maria I. De Rosa and C. D. Litton (page images at HathiTrust)
Fire tests of rigid plastic ventilation ducts / (Pittsburgh, Pa. : U.S. Dept. of the Interior, Bureau of Mines, 1987), by F. J. Perzak, T. A. Kubala, and Charles P. Lazzara (page images at HathiTrust)
Shock loss calculations across junctions and splits / ([Washington, D.C.] : Dept. of the Interior, Bureau of Mines, [1977]), by John C. Edwards and Henry E. Perlee (page images at HathiTrust)
Calculations of thermal-neutron flux distributions in concrete-walled ducts using an albedo model with Monte Carlo techniques / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by V. R. Cain, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Neutron Physics Division (page images at HathiTrust)
The transmission of neutrons through ducts in water / (Upton, N.Y. : Brookhaven National Laboratory, 1956), by Ferdinand J. Shore, Robert D. Schamberger, U.S. Atomic Energy Commission, and Brookhaven National Laboratory (page images at HathiTrust)
Force and pressure characteristics for a series of nose inlets at Mach numbers from 1.59 to 1.99. (Washington, D.C. : National Advisory Committee for Aeronautics, [1951]), by L. J. Obery, G. W. Englert, United States. National Advisory Committee for Aeronautics. NACA research memorandum, United States. National Advisory Committee for Aeronautics, and Lewis Flight Propulsion Laboratory (page images at HathiTrust)
An experimental investigation of the design variables for NACA submerged duct entrances / (Washington, D.C. : National Advisory Committee for Aeronautics, 1948), by Emmet A. Mossman, Lauros M. Randall, and United States. National Advisory Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Tests of a small-scale NACA submerged inlet at transonic Mach numbers / (Washington, D.C. : National Advisory Committee for Aeronautics, [1950]), by L. Stewart Rolls, George A. Rathert, United States. National Advisory Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Criteria for initial flow reversal in symmetrical twin-intake air-induction systems operating at supersonic speeds / (Washington, D.C. : National Advisory Committee for Aeronautics, [1956]), by Andrew Beke, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
An investigation of several NACA 1-series nose inlets with and without protruding central bodies at high-subsonic Mach numbers and at a Mach number of 1.2 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Robert E. Pendley, Harold L. Robinson, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Low-speed wind-tunnel investigation of a triangular sweptback air inlet in the root of a 45 degree sweptback wing / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Arvid L. Keith, Jack Schiff, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
A preliminary investigation of aerodynamic characteristics of small inclined air outlets at transonic Mach numbers / (Washington, D.C. : National Advisory Committee for Aeronautics, 1953), by Paul E. Dewey, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
An experimental study of five annular air inlet configurations at subsonic and transonic speeds / (Washington, D.C. : National Advisory Committee for Aeronautics, 1953), by Carroll R. Bryan, Frank F. Fleming, Jospeh R. Milillo, Robert E. Pendley, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Some internal-flow characteristics at zero flight speed of an annular supersonic inlet and an open-nose inlet with sharp and rounded lips / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Joseph R. Milillo, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Investigation of fixed-geometry supersonic inlets with bypass ducts for matching turbojet-engine air-flow requirements over a range of transonic and supersonic speeds / (Washington, D.C. : National Advisory Committee for Aeronautics, 1958), by Abraham Leiss, Walter J. Kouyoumjian, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
A variable-geometry annular cascade-type inlet at Mach numbers of 1.9 and 3.05 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by James F. Connors, Rudolph C. Meyer, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Performance of external-compression bump inlet at Mach numbers of 1.5 to 2.0 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1957), by Paul C. Simon, Ronald G. Huff, Dennis W. Brown, Lewis Flight Propulsion Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
Radiation errors in air ducts under nonisothermal conditions using thermocouples, thermistors, and a resistance thermometer / ([Washington] : U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1969), by Joseph C. Davis (page images at HathiTrust)
Should you have the air ducts in your home cleaned? (Washington, DC : U.S. Environmental Protection Agency, Indoor Environments Division, Office of Air and Radiation : For sale by the U.S. G.P.O., Supt. of Docs., [1997]), by United States. Environmental Protection Agency. Office of Air and Radiation (page images at HathiTrust)
An investigation of a thermal ice-prevention system for a C-46 cargo airplane. 1 - Analysis of the thermal design for wings, empennage, and windshield / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by Carr Neel, Ames Research Center, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Research on sound propagation in sound-absorbent ducts with superimposed air streams : Volume 2 /, by F. Mechel, W. Schilz, and sponsor Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)
Research on sound propagation in sound-absorbent ducts with superimposed air streams : Volume 3 /, by F. Mechel, W. Schilz, P. Mertens, and sponsor Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)
Research on sound propagation in sound-absorbent ducts with superimposed air streams : Volume 1 /, by F. Mechel and sponsor Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)
Interaction between air flow and airborne sound in a duct., by P. A. Mertens, W. M. Schilz, Fridolin P. Mechel, and sponsor Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)
Interaction between air flow and airborne sound in a duct /, by Fridolin P. Mechel, W. M. Schilz, P. A. Mertens, and sponsor Aerospace Medical Research Laboratories (U.S.) (page images at HathiTrust)

More items available under narrower terms.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.