The Online Books Page

Coatings

See also what's at Wikipedia, your library, or elsewhere.

• Materials
• Surfaces (Technology)

• Thin films
• Coating processes

• Coatings -- Additives
• Coatings -- Analysis
• Coatings -- Composition
• Coatings -- Congresses
• Coatings -- Defects
• Coatings -- Effect of radiation on
• Coatings -- Environmental aspects
• Coatings -- Evaluation
• Coatings -- Optical properties
• Coatings -- Periodicals
• Coatings -- Reliability
• Coatings -- Research
• Coatings -- Safety regulations
• Coatings -- Standards
• Coatings -- Testing
• Coatings -- Thermal properties
• Cement coating
• Ceramic coating
• Coated fabrics
• Concrete coatings
• Controlled release technology
• Enamel and enameling
• Epoxy coatings
• Finishes and finishing
• Glass coatings
• Lacquer and lacquering
• Metal coating
• Paint
• Plastic coating
• Plastic coatings
• Protective coatings
• Tantalum electrodes -- Coatings
• Thick films
• Varnish and varnishing
• Space vehicles -- Coatings

• Surface coatings

• The effect of edge preparation on coating life : phase one (Avondale Shipyards :, 1983), by Leslie W. Sandor, Avondale Shipyards, National Shipbuilding Research Program, and United States Maritime Administration (page images at HathiTrust)
• A laboratory study investigating the feasibility of applying calcite-type coatings to segregated ballast tanks ([Avondale Shipyards, Inc.?], 1981), by George A. Gehring, John W. Peart, Avondale Shipyards, Ocean City Research Corporation, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Submersion testing of coatings for sealing shale (U.S. Dept. of the Interior, Bureau of Mines, 1977), by Jack E. Fraley (page images at HathiTrust)
• Fatigue-resistant lead sheet and lead-laminate noise barriers (Dept. of the Interior, Bureau of Mines, 1978), by M. M. Tilman and J. W. Jensen (page images at HathiTrust)
• How fourteen coating systems affected smoke yield from Douglas-fir plywood (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by John J. Brenden and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Gamma radiation damage studies of organic protective coatings and gaskets (Oak Ridge National Laboratory, 1956), by J. C. Bresee, J. S. Watson, C. D. Watson, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• Temperature rise under a rib (U.S. Atomic Energy Commission. Technical Information Service, 1943), by William Karush, G. Young, Clinton Laboratories, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Flow of heat into coating through a narrow strip (U.S. Atomic Energy Commission. Technical Information Division, 1944), by William Karush, G. Young, Clinton Laboratories, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Influence of the deposition conditions on radiofrequency magnetron sputtered MoS₂ films (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Pierre A. Steinmann, Talivaldis Spalvins, and Lewis Research Center (page images at HathiTrust)
• Preliminary operation of oxide-coated brush cathodes in electron-bombardment ion thrustors (National Aeronautics and Space Administration ;, 1965), by William R. Kerslake and Lewis Research Center (page images at HathiTrust)
• Deposition of aluminum and silicon oxide on epoxy-coated substrates (National Aeronautics and Space Administration ;, 1967), by Ferdinand L. Acampora, Adolph E. Spakowski, and Lewis Research Center (page images at HathiTrust)
• Formulation of electrically conductive thermal-control coatings (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Michael C. Shai and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Emissivity coatings for low-temperature space radiators (National Aeronautics and Space Administration ;, 1969), by G. R. Cunnington, F. J. Smith, J. R. Grammer, Lewis Research Center, and Lockheed Palo Alto Research Laboratory (page images at HathiTrust)
• Exploratory investigation of several coated and uncoated metal, refractory, and graphite models in a 3800° F stagnation temperature air jet (National Aeronautics and Space Administration, 1960), by Otto F. Trout and Langley Research Center (page images at HathiTrust)
• Selected fretting-wear-resistant coatings for titanium--6-percent-aluminum--4-percent-vanadium alloy (U.S. National Aeronautics and Space Administration ;, 1976), by Robert C. Bill, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Lubricating properties of some bonded fluoride and oxide coatings for temperature to 1500 ̊F (National Aeronautics and Space Administration, 1960), by Harold E. Sliney and Lewis Research Center (page images at HathiTrust)
• X-ray photoelectron spectroscopy study of radiofrequency sputtered chromium bromide, molybdenum disilicide, and molybdenum disulfide coatings and their friction properties (National Aeronautics and Space Administration ;, 1977), by Donald R. Wheeler and William A. Brainard (page images at HathiTrust)
• NASA TN D-4734 (National Aeronautics and Space Administration ;, 1968), by Thaddeus S. Mroz, Robert B. King, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Oxidation and thermal fatigue of coated and uncoated NX-188 nickel-base alloy in a high-velocity gas stream (National Aeronautics and Space Administration ;, 1972), by James R. Johnston, Stanley G. Young, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Adhesion and transfer of polytetrafluoroethylene to metals studied by Auger emission spectroscopy (National Aeronautics and Space Administration ;, 1972), by Stephen V. Pepper, Donald H. Buckley, and Lewis Research Center (page images at HathiTrust)
• Investigation of phase-change coatings for variable thermal control of spacecraft (National Aeronautics and Space Administration ;, 1972), by Warren C. Kelliher, Philip R. Young, and Langley Research Center (page images at HathiTrust)
• NASA TN D-4569 (National Aeronautics and Space Administration ;, 1968), by Alan Arias, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• The effects of particle size on the optical properties and surface roughness of a glass-balloon-filled black paint (National Aeronautics and Space Administration ;, 1974), by T. M. Heslin, Marvin Harper, James Heaney, and Goddard Space Flight Center (page images at HathiTrust)
• Effect of casing treatment on overall and blade-element performance of a compressor rotor (National Aeronautics and Space Administration ;, 1971), by Royce D. Moore, Robert J. Blade, George Kovich, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6422 (National Aeronautics and Space Administration ;, 1971), by Ronald G. Huff, Frank B. Molls, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-6317 (National Aeronautics and Space Administration ;, 1971), by Robert M. Caves, Salvatore J. Grisaffe, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Investigation of aluminum phosphate coatings for thermal insulation of airframes (National Aeronautics and Space Administration, 1959), by A. G. Eubanks, D. G. Moore, and United States. National Bureau of Standards (page images at HathiTrust)
• NASA TN D-1714 (National Aeronautics and Space Administration, 1963), by W. B. Fussell, F. A. Jerozal, J. J. Triolo, Inc Continental Technical Service, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-6236 (National Aeronautics and Space Administration ;, 1971), by G. E. McDaniel, George C. Marshall Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• An investigation of a new nickel alloy strengthened by dispersed thoria (National Aeronautics and Space Administration :, 1963), by Charles R. Manning, David N. Braski, Dick M. Royster, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Elastohydrodynamic analysis using a power law pressure-viscosity relation (National Aeronautics and Space Administration ;, 1973), by Stuart H. Loewenthal, Erwin V. Zaretsky, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Fabrication technology. (National Aeronautics and Space Administration. Technology Utilization Office., 1974), by United States. National Aeronautics and Space Administration. Technology Utilization Office (page images at HathiTrust)
• Further study of metal transfer between sliding surfaces (National Advisory Committee for Aeronautics, 1951), by J. T. Burwell, C. D. Strang, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Chemical base coatings for zirconium and zircaloy (U.S. Atomic Energy Commission, Technical Information Service Extension, 1956), by E. J. Hennessey, A. Grella, U.S. Atomic Energy Commission, and Bridgeport Brass Company (page images at HathiTrust)
• Effectiveness of lining materials in increasing the blast resistance of a simulated outer containment vessel for a nuclear reactor (Aberdeen Proving Ground, 1961), by W. O. Ewing, J. W. Hanna, U.S. Atomic Energy Commission, and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• Solar-selective paint coating development : final report, for the period 5 June 1978-4 December 1979 (Washington, D.C. : U.S. Department of Energy, Solar Energy, 1979., 1979), by W. D. McKelvey, R. J. H. Lin, P. B. Zimmer, United States. Department of Energy. Division of Solar Energy, Honeywell Systems and Research Center, and United States. Department of Energy. Solar Heating and Cooling Research and Development Branch (page images at HathiTrust)
• Production problems associated with coating refractory-metal hardware for aerospace vehicles (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1963., 1963), by W. A. Gibeaut, E. S. Bartlett, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Automobile assembly plant spray booth cleaning emission reduction technology review (U.S. Environmental Protection Agency, 1994), by United States. Environmental Protection Agency. Office of Air Quality Planning and Standards (page images at HathiTrust)
• Temperature rise under a rib (U.S. Atomic Energy Commission. Technical Information Service, 1951), by William Karush, G. Young, Clinton Laboratories, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Flow of heat into coating through a narrow strip (U.S. Atomic Energy Commission. Technical Information Division, 1951), by William Karush, G. Young, Clinton Laboratories, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Ultrasonic inspection of the strength member weld of transit and pioneer heat sources (Miamisburg, Ohio : Mound Laboratory, 1975., 1975), by W. A. Dudley, Monsanto Chemical Company, Mound Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Investigation of the problems associated with the Pt 20 Rh clads of the viking heat sources VF 3 and VF 7. (Miamisburg, Ohio : Mound Laboratory, 1975., 1975), by R. E. Zielinski, Monsanto Chemical Company, Mound Laboratory, and United States. Energy Research and Development Administration (page images at HathiTrust)
• Molybdenum disilicide coating for graphite (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1954, 1954), by J. F. Lynch, W. H. Duckworth, J. A. Slyh, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Battelle Memorial Institute (page images at HathiTrust)
• Metal protective and radiation reflective ceramic coatings (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by Clarence L. Hoenig, Dwight G. Bennett, Tracy A. Willmore, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Further data on the juncture condition of temperature at the interface of two bodies in sliding contact (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1963., 1963), by T. E. Simkins, S. L. Pu, Rensselaer Polytechnic Institute, United States. Air Force. Systems Command. Aeronautical Systems Division, and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• The evaluation of high temperature materials. Part I, Evaluation of coatings for refractory alloys. Part II, Materials evaluation with an arc-plasma-jet (Wright-Patterson Air Force Base, Ohio : Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1964., 1964), by John C. Wurst, Air Force Materials Laboratory (U.S.), and United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
• A review of ceramic thin film technology (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Directorate of Laboratories, Air Force Systems Command, United States Air Force, 1967., 1967), by Milo Macha, Air Force Materials Laboratory (U.S.), and Inc. Librascope Group General Precision Systems (page images at HathiTrust)
• Evaluation of sapphire wool and its incorporation into composites of high strength (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1965., 1965), by R. L. Mehan, A. Gatti, Earl Feingold, Air Force Materials Laboratory (U.S.), and General Electric Company. Space Sciences Laboratory (page images at HathiTrust)
• Vapor plating of aluminum on steel (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Jesse J. Crosby and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
• All-purpose plating apparatus for research on vapor phase coatings (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Iwan Marinow, Robert Bakish, Charles A. Gellar, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
• Metal protective ceramic coatings : molecular basis (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1955., 1955), by Karl E. Nelson, Dwight G. Bennett, George Don McTaggart, United States. Air Force. Air Research and Development Command, and Wright Air Development Center (page images at HathiTrust)
• Research and development for surface protection for silicon devices (Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1963., 1963), by S. S. Flaschen, M. A. Hall, H. W. Cooper, Air Force Cambridge Research Laboratories (U.S.), and Inc. Semiconductor Products Division Motorola (page images at HathiTrust)
• Thermal stresses in coatings on carbon-carbon composites (National Aeronautics and Space Administration, Langley Research Center, 1996), by Andreas W. Obst, M. W. Hyer, and Langley Research Center (page images at HathiTrust)
• Brush and pail (Alabastine Company, 1909), by Alabastine Company (page images at HathiTrust)

More items available under narrower terms.