Copper-zirconium alloysSee also what's at your library, or elsewhere.
Broader terms: |
Filed under: Copper-zirconium alloys Conventionally cast and forged copper alloy for high-heat-flux thrust chambers / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1987), by John M. Kazaroff, George A. Repas, and Lewis Research Center (page images at HathiTrust) High-temperature mechanical properties of a zirconium-modified, precipitation-strengthened nickel-30 percent copper alloy / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by J. Daniel Whittenberger and Lewis Research Center (page images at HathiTrust) Contributions to the chemical analysis of copper in zircaloy, silicon in uranium - silicon alloys, and niobium in uranium - niobium alloys /, by E. B. Read, L. Zopatti, H.M. Read, E. Pollock, Lawler,H.M., P.R. Hicks, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust) Constitution diagram of the copper-zirconium alloy system / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1952), by Richard Norman Augustson, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust) Tensile properties of zirconium and zirconium alloys. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1955.), by C. R. Simcoe, W. L. Mudge, Westinghouse Electric Corporation. Atomic Power Division, and U.S. Atomic Energy Commission (page images at HathiTrust) Hydrogen overvoltage and electrochemical potentials of zirconium and zirconium intermetallics / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Division of Technical Information, 1963), by J. S. Armijo, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Items below (if any) are from related and broader terms.
Filed under: Copper alloys Metallurgical effects of impurities in recycled copper alloys / (Pittsburgh, Pa. : U.S. Dept. of the Interior, Bureau of Mines, 1985), by H. V. Makar and W. D. Riley (page images at HathiTrust) Ueber Bronzelegirungen und ihre Verwendungen für geschützrohre und technische zwecke ... (Dresden, C.C. Meinhold & söhne, 1875), by Carl Künzel (page images at HathiTrust) British standard specification for copper alloy bars (for use in automatic machines). (London, Pub. for the Committee by C. Lockwood & son, 1907), by British Standards Institution (page images at HathiTrust) The electrical resistance and temperature coefficient of copper-nickel-manganese alloys / (Troy, N.Y. : Dept. of Electrical Engineering, Russell Sage Laboratory, Rensselaer Polytechnic Institute, [1911?], 1914), by George L. Gray (page images at HathiTrust; US access only) The copper-rich alloys of the copper-nickel-tin system, ([New York, 1932]), by John Trimble Eash and Clair Upthegrove (page images at HathiTrust) Influence of alloying elements on friction and wear of copper / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust) High temperature low cycle fatigue mechanisms for a nickel-base and a copper-base alloy / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Chin-I. Shih, University of Cincinnati. Dept. of Materials Science and Metallurgical Engineering, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, and Lewis Research Center (page images at HathiTrust) Report to the Alloys Research Committee. (London : Institution of Mechanical Engineers, 1891-1921), by Institution of Mechanical Engineers (Great Britain). Alloys Research Committee (page images at HathiTrust; US access only) Alloys of chromium, copper and nickel / (1915), by Oscar Edward Harder (page images at HathiTrust; US access only) The analysis of complex alloys of the nickel, copper, chromium type / (1915), by Silas Alonzo Braley (page images at HathiTrust; US access only) The corrosion of brass in dilute electrolytes / (1920), by Bertram Feuer (page images at HathiTrust; US access only) Diffusion rate data and mass transport phenomena for copper systems / (Washington : Diffusion in Metals Data Center, Metallurgy Division, Institute for Materials Research, National Bureau of Standards, 1977-), by Daniel B. Butrymowicz, Michael E. Read, and John R. Manning (page images at HathiTrust) On the constitution of the copper-tin series of alloys / (London : [s.n.], 1903), by Charles Thomas Heycock and Francis H. Neville (page images at HathiTrust) On the copper-rich kalchoids (copper-tin-zinc-alloys). (London : [s.n.], 1913), by Samuel Leslie Hoyt (page images at HathiTrust; US access only) Kort oversigt over Kobberets indflydelse paa jern og staal, (Kristiania, I kommission hos H. Aschehoug & co., 1923), by William Minot Guertler (page images at HathiTrust; US access only) The alloys of iron and copper, (New York and London, Pub. for the Engineering Foundation by the McGraw-Hill Book Co., [1934]), by James Lawrence Gregg, Boris N. Daniloff, Battelle Memorial Institute, and Engineering Foundation (U.S.) (page images at HathiTrust) Current industrial reports. (Washington, D.C. : U.S. Dept. of Commerce, Bureau of the Census, Industry Division, -1972), by United States Bureau of the Census (page images at HathiTrust) Current industrial reports. (Washington : Dept. of Commerce, Bureau of the Census, Industry Division; for sale by the Subscriber Services Section (Publications), Bureau of the Census.), by United States Bureau of the Census (page images at HathiTrust) Certain elastic properties of phosphor-bronze wires /, by Arnold J. Oehler, George Walter Stewart, and degree-granting institution State University of Iowa. Graduate College (page images at HathiTrust; US access only) Alloys of chromium, copper and nickel, ([Urbana, 1917]), by Oscar Edward Harder and David Ford McFarland (page images at HathiTrust) Dispersion strengthened copper-thorium boride and copper-alumina alloys produced by melting and casting / (Philadelphia : Aerosciences Laboratory, General Electric, Missile and Space Vehicle Dept., 1959), by Gilbert J London and General Electric Company. Aerosciences Laboratory (page images at HathiTrust) The routine analysis of copper base alloys. (New York, Chemical Pub. Co., 1960), by Frank J. Versagi (page images at HathiTrust) Die Bronzen und Kupferlegirungen der alten und ältesten Völker, mit Rücksichtname auf jene der Neuzeit, (Erlangen, F. Enke, 1869), by Ernst Bibra (page images at HathiTrust) Role of alloying elements in adhesive transfer and friction of copper-base alloys / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978), by Donald H. Buckley and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust) Tensile behavior of unnotched and notched tungsten-copper laminar composites / (Washington : National Aeronautics and Space Administration ; Springfield, Va. for sale by the National Technical Information Service, 1976), by Charles A. Hoffman, John W. Weeton, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust) La fonderie de cuivre actuelle : bronzes, laitons, aluminium, etc. : procédés, outils, matériel. (Paris : C. Béranger, 1905, 1898), by J. Buchetti (page images at HathiTrust; US access only) On the copper rich kalchoids ... (Berlin, Gebrüder Borntraeger, 1914), by Samuel Leslie Hoyt (page images at HathiTrust; US access only) Métallurgie du cuivre et alliages de cuivre, (Paris, J.-B. Baillière et fils, 1925), by Maurice Altmayer and L. Guillet (page images at HathiTrust; US access only) Kupfer und Messing : sowie alle technisch wichtigen Kupferlegirungen, ihre Darstellungs methoden, Eigenschaften und Weiterverarbeitung zu Handelswaaren -- / (Wien : A. Hartleben, 1883), by Eduard Japing (page images at HathiTrust) Sliding friction of copper alloys in vacuum / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia], 1968), by Jane Jellison, C. L. Staugaitis, Roamer Predmore, United States National Aeronautics and Space Administration, and Goddard Space Flight Center (page images at HathiTrust; US access only) Ordnance materials handbook: copper and copper alloys. ([Washington], 1956), by United States. Army. Ordnance Corps (page images at HathiTrust) Potential measurements on the copper-nickel series of alloys, and some observations on brasses ... (Easton, Pa., Eschenbach printing company, 1918), by Newell Trimble Gordon (page images at HathiTrust) Copper as an alloying element in steel and cast iron, (New York, McGraw-Hill Book Co., 1948), by Clarence Herman Lorig and Robert R. Adams (page images at HathiTrust) Preparation of NBS copper-base spectrochemical standards (Washington, U.S. Dept. of Commerce, National Bureau of Standards; for sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1964), by R. E. Michaelis, Richard Flitsch, and Leroy Linwood Wyman (page images at HathiTrust) Elevated-temperature properties of coppers and copper-base alloys / (Philadelphia : American Society for Testing Materials, [1956]), by Clair Upthegrove, Henry Lewis Burghoff, and Joint Committee on Effect of Temperature on the Properties of Metals (page images at HathiTrust) The copper-rich alloys of the copper-nickel-tin system, ([New York, 1932]), by John Trimble Eash and Clair Upthegrove (page images at HathiTrust) Maintenance, cleaning, finishing and coloring of copper, brass, bronze / (New York : Copper & Brass Research Association, 1953), by Copper & Brass Research Association (U.S.) (page images at HathiTrust) Methods for the chemical analysis of NBS copper-base spectrochemical standards (Washington, For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1965), by Rosemond Kay Bell (page images at HathiTrust) Accuracy of solution X-ray spectrometric analysis of copper-base alloys (Washington, For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1965), by Robert Alvarez and Richard Flitsch (page images at HathiTrust) Technical information on Revere copper and copper alloys. (New York, N.Y., Revere Copper and Brass Inc., 1954, c1953), by Revere Copper and Brass Incorporated (page images at HathiTrust; US access only) Recherches sur les alliages de cuivre et de zinc. ([Paris : s.n., 1896]), by Georges Charpy and Paris Société d'encouragement pour l'industrie nationale (page images at HathiTrust) Electrolytic preparation of beryllium-copper alloys / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1972]), by D. E. Kirby, Thomas A. Sullivan, D. A. O'Keefe, Boulder City Metallurgy Research Laboratory (U.S.), and United States Bureau of Mines (page images at HathiTrust) The uranium-manganese and uranium-copper alloy systems / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1950), by Harley A. Wilhelm, O. Norman Carlson, Iowa State College, and U.S. Atomic Energy Commission (page images at HathiTrust) Precipitation processes in copper-rich copper-iron alloys /, by A. Boltax, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust) Gold, silver, copper alloys, (New York, American institute of mining and metallurgical engineers, inc., c1928), by Frederic Edward Carter (page images at HathiTrust) Metallurgical effects of impurities in recycled copper alloys / ([Pittsburgh, Pa.] : U.S. Dept. of the Interior, Bureau of Mines, [1985]), by H. V. Makar and W. D. Riley (page images at HathiTrust) Preventing formation of copper alloys of tin, antimony, and arsenic on steel surfaces during reheating to reduce hot shortness / ([Pittsburgh] : U.S. Dept. of the Interior, Bureau of Mines, [1975]), by Mark I. Copeland, John S. Howe, and United States Bureau of Mines (page images at HathiTrust) Identification and analyses of copper-base alloys by fluorescent X-ray spectrography / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1972]), by William Joseph Campbell, Harold E. Marr, College Park Metallurgy Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust) Effects of ultrasonics on electrodeposition of copper alloys from cyanide electrolytes / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1967]), by Charles B. Kenahan, Edmond Chin, David Schlain, and United States Bureau of Mines (page images at HathiTrust) Dispersion-strengthening in copper-alumina and copper-yttria alloys / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1969]), by R. L. Crosby, Donald H. Desy, and United States Bureau of Mines (page images at HathiTrust) Rapid identification of copper-base alloys by energy dispersion X-ray analysis / ([Washington, D.C.] : U.S. Bureau of Mines, [1974]), by Harold E. Marr, College Park Metallurgy Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust) The approximate melting points of some commercial copper alloys / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1913), by H. W. Gillett and A. B. Norton (page images at HathiTrust) Effect of lowering the tin content of secondary red brass / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines ;, 1969), by H. Kenworthy, E. R. Cole, J. L. Holman, L. W. Higley, United States. Bureau of Mines. Technical Progress Report, and United States. Bureau of Mines. Materials Recycling Program (page images at HathiTrust) Thermal expansion of copper and some of its important industrial alloys / ([Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1920]), by Peter Hidnert and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust) Metallographic etching reagents. ([Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1921]), by Henry S. Rawdon, Marjorie Geraldine Lorentz, and United States. National Bureau of Standards. Scientific Papers (page images at HathiTrust) Effect of neutron bombardment on order in the alloy Cu₃Au / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Branch, 1949), by Sidney Siegel, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust) The casting of inconel-tubing heaters in high copper alloy / (Oak Ridge, Tennessee : Technical Information Division, 1950), by F. J. Lambert, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust) The effect of cold work on local order /, by Peter Strom Rudman, B. L. Averbach, U.S. Atomic Energy Commission. New York Operations Office, Massachusetts Institute of Technology. Department of Metallurgy, and U.S. Atomic Energy Commission (page images at HathiTrust) Causes of the effect of small dissolved admixtures on the kinetics of the aging of alloys /, by V. I. Arkharov, N. N. Skornyakov, B. N. Varskoi, U.S. Atomic Energy Commission, and National Science Foundation (U.S.) (page images at HathiTrust) Current industrial reports. (Washington : U.S. Dept. of Commerce, Bureau of the Census, Bureau of Domestic Commerce.), by United States Bureau of the Census and United States. Bureau of Domestic Commerce (page images at HathiTrust) Copper, brass, and bronze castings; their structures, properties, and applications. ([Evanston, Ill.] Non-ferrous Founders' Society, [1962] c1961-), by Richard Aloysius Flinn (page images at HathiTrust) Low temperature mechanical properties of copper and selected copper alloys : a compilation from the literature / ([Washington, D.C.] : National Bureau of Standards : for sale by the Supt. of Docs., U.S. G.P.O., 1967. --), by R. P. Reed, Ritchie P. Mikesell, and United States. National Bureau of Standards (page images at HathiTrust; US access only) Current industrial reports. ([Washington, D.C.] : The Bureau : [For sale by Subscriber Services Section (Publications), Bureau of the Census, 1979-), by United States Bureau of the Census and United States. Bureau of Industrial Economics (page images at HathiTrust) Effect of sodium-potassium alloy on various materials at elevated temperatures / (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Division of Technical Information ;, 1946), by LeRoy R. Kelman, U.S. Atomic Energy Commission, University of Chicago, and Argonne National Laboratory (page images at HathiTrust)
More items available under broader and related terms at left. |