The Online Books Page

Energy Absorbing Bumpers

See also what's at your library, or elsewhere.

• Underride/override of automobile front structures in intervehicular collisions. Volume 2 - car-to-car head-on impacts. Final report. (1971), by Norman J. Deleys, David J. Segal, and J. S. Patten (page images at HathiTrust)
• Experimental safety vehicle (family sedan). Final report. (1972) (page images at HathiTrust)
• The Fairchild ESV family sedan - final report. Volume 1. (1972) (page images at HathiTrust)
• The Fairchild ESV family sedan - final report. Volume 2. (1972) (page images at HathiTrust)
• Test and evaluation of the AMF, Inc. and Fairchild Industries experimental safety vehicles. Volume IV. ESV program summary. Final report. (1972) (page images at HathiTrust)
• Rear end structural crashworthiness of unitized construction vehicles, design development and design verification. Final report. (1973), by Robert L. Anderson and E. Enserink (page images at HathiTrust)
• Rear end structural crashworthiness of unitized construction vehicles - summary report. Final report. (1973), by Robert L. Anderson and E. Enserink (page images at HathiTrust)
• Aggressiveness of crashworthy CAL MOD 2D and AMF Inc. ESV front structures. Final report. (1973) (page images at HathiTrust)
• Experimental safety vehicle tradeoff and integration systems studies. Volume I - sections 1 through 5. Final report. (1973) (page images at HathiTrust)
• Vehicle front end structure crash evaluation program. Volume II. Technical report. Final report. (1974), by L. Maurice Shaw, Allen D. Harper, and Robert L. Anderson (page images at HathiTrust)
• Vehicle front end structure crash evaluation program. Volume III. Appendices. Final report. (1974), by L. Maurice Shaw, Allen D. Harper, and Robert L. Anderson (page images at HathiTrust)
• Fiat 2000/AMF ESVs - front-to-front impact test at 75 mph. Final test report. (1975) (page images at HathiTrust)
• Nissan/AMF ESVs - front-to-front impact test at 60 mph. Final test report. (1975) (page images at HathiTrust)
• Toyota/AMF ESVs - front-to-front impact test at 60 mph. Final test report. (1975) (page images at HathiTrust)
• Research safety vehicle. Phase I. Volume III. Vehicle characterization and performance specification. Final report. (1975), by D. Struble and G. Bradley (page images at HathiTrust)
• Research safety vehicle (RSV). Phase I. Final report. Volume I. Introduction, executive summary. (1975) (page images at HathiTrust)
• Research safety vehicle (RSV). Phase I. Final report. Volume III. Vehicle characterization, performance specifications. (1975) (page images at HathiTrust)
• U.S. research safety vehicle (RSV). Phase I program. Volume I. Introduction and executive summary. Final report. (1975), by J. Andon, E. Dodson, Anil V. Khadilkar, R. Olson, L. Pauls, and W. Rup (page images at HathiTrust)
• U.S. research safety vehicle (RSV). Phase I program. Volume II. Program definition foundation. Final report. (1975), by J. Andon, E. Dodson, Anil V. Khadilkar, R. Olson, L. Pauls, and W. Rup (page images at HathiTrust)
• U.S. research safety vehicle (RSV). Phase I program. Volume III. RSV characteristics and performance specifications. Final report. (1975), by J. Andon, E. Dodson, Anil V. Khadilkar, R. Olson, L. Pauls, and W. Rup (page images at HathiTrust)
• Research safety vehicle program (phase I) - volume IV. RSV conceptual definition; final phase I bi-monthly report. Final technical report. (1975), by Patrick M. Miller, S. M. Pugliese, M. O. Ryder, Frank A. DuWaldt, and Sanborn W. Chesley (page images at HathiTrust)
• Evaluation methodology for federal motor vehicle safety standards. Volume I: executive summary. Final report. (1977), by R. L. Braun, R. H. Cronin, N. A. David, A. V. Fend, and J. R. Norman (page images at HathiTrust)
• Evaluation methodology for federal motor vehicle safety standards. Volume II: technical findings. Final report. (1977), by R. L. Braun, R. H. Cronin, N. A. David, A. V. Fend, and J. R. Norman (page images at HathiTrust)
• Evaluation methodologies for four federal motor vehicle safety standards. FMVSS 214: side door strength. FMVSS 301: fuel system integrity. FMVSS 215: exterior protection. FMVSS 208: occupant crash protection. Final report. (1977) (page images at HathiTrust)
• Review of four federal motor vehicle safety standards: FMVSS 214, 215, 301, 208. Task #1 report. (1977), by Hans C. Joksch and Joseph C. Reidy (page images at HathiTrust)
• Final design and implementation plan for evaluating the effectiveness of FMVSS 215: exterior protection. Tasks #4 & #5 report. (1977) (page images at HathiTrust)
• Guardrail/vehicle dynamic interaction. Final report. (1976), by R. W. Bruce, E. E. Hahn, and N. R. Iwankiw (page images at HathiTrust)
• Final assessment of the bumper standard. (1979) (page images at HathiTrust)
• Final assessment of the bumper standard. Executive summary. (1979) (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Task VI additional bumpers, FMVSS 215 - exterior protection. Final report. (1978), by M. R. Harvey, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Passenger car/pedestrian impact protection system evaluation. Final report. (1979), by R. McLean, L. A. C. Barbarek, and O. J. Viergutz (page images at HathiTrust)
• Calculations and supporting material for the preliminary analysis of the bumper standard. (1979) (page images at HathiTrust)
• Comments of Houdaille industries on the bumper standard. (1979) (page images at HathiTrust)
• Calspan/Chrysler Research Safety Vehicle - phase III: final technical report. Volume I: executive summary. (1980), by Gardner J. Fabian (page images at HathiTrust)
• Research Safety Vehicle - phase III: final design report. Volume II: appendices. (1979), by Gardner J. Fabian and G. E. Frig (page images at HathiTrust)
• Analysis of insurance claims to determine bumper effect on crash damage. Final report. (1980), by Paul A. Abramson, Jay Cohen, and Howard F. Stein (page images at HathiTrust)
• Drivers survey on unreported and low-damage accidents involving bumpers. Final report. (1980), by John S. Burke, D. Cadell, S. Huber, and David R. Morganstein (page images at HathiTrust)
• Analysis of insurance claims to determine bumper effect on crash damage - 1979 model year. Final report addendum. (1980), by Paul A. Abramson, Jay Cohen, and Howard F. Stein (page images at HathiTrust)
• Implementation cost to consumers of Part 581 - Bumper Standard, Phase II; weight and cost study of three "X" body bumper systems; and consumer replacement cost for complete bumper systems studied. Final report. (1980), by C. B. Eckel, M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume I. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume II. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Analysis of 1981 and 1982 insurance claims to determine effect of 1981 and 1982 bumpers on crash damage. Final report. (1984), by Paul A. Abramson and M. Yedlin (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume I: executive summary. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume III: 1982 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume II: 1982 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume IV: 1983 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume V: 1983 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VI: 1984 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VII: 1984 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Consumer attitudes toward consumer information programs - a qualitative report. Final report. (1986) (page images at HathiTrust)
• Research safety vehicle. Phase I. Volume III. Final report. (1975) (page images at HathiTrust)
• An evaluation of the bumper standard - as modified in 1982. Technical report. (1987), by Warren G. La Heist and F. G. Ephraim (page images at HathiTrust)

More items available under narrower terms.