The Online Books Page

Extensometer

See also what's at Wikipedia, your library, or elsewhere.

• Deformations (Mechanics)

• Strain gages

• Design of extensometer for creep studies : special progress report / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service , [1953]), by B. R. Gossick, U.S. Atomic Energy Commission. Chicago Operations Office, Purdue Research Foundation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A high-temperature vacuum extensometer / ([Ames, Iowa] : Ames Laboratory, [1960]), by J. R. Bohn, U.S. Atomic Energy Commission, and Ames Laboratory (page images at HathiTrust)
• Summary of extensometric measurements in El Paso, Texas / (Albuquerque, N.M. : U.S. Dept. of the Interior, U.S. Geological Survey ; Denver, CO : U.S. Geological Survey, Information Services [distributor], 2003), by Charles E. Heywood, Geological Survey (U.S.), and United States & Mexico. United States Section International Boundary & Water Commission (page images at HathiTrust)

• An angle-of-attack and angle-of-yaw indicator using a direct-reading, simple strain-gage circuit on sting balances. ([Washington], 1954), by Robert B. Ormsby (page images at HathiTrust; US access only)
• Structural behavior analysis, Canyon Ferry Dam, 1951-1964 / (Denver, Colo. : U.S. Dept. of the Interior, Bureau of Reclamation, Division of Design, 1966), by Keith Jones, Louis H. Roehm, Missouri River Basin Project (U.S.), and Engineering and Research Center (U.S.). Division of Design (page images at HathiTrust)
• Alternator and voltage regulator-exciter for a Brayton cycle space power system. (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1970), by J. E. Greenwell, L. J. Yeager, E. F. Russell, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• Experiments to study strain-gage load calibrations on a wing structure at elevated temperatures / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Richard C. Monaghan, Roger A. Fields, and Flight Research Center (U.S.) (page images at HathiTrust)
• Strain-gage bridge calibration and flight loads measurements on a low-aspect-ratio thin wing / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Ellwood L. Peele, Clinton V. Eckstrom, and Langley Research Center (page images at HathiTrust)
• The use of the strain gage to determine stresses in steel structures / (1914), by George Paul Boomsliter (page images at HathiTrust; US access only)
• Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, VA : For sale by the National Technical Information Service, 1989), by Lawrence F. Reardon (page images at HathiTrust)
• Comparison and nature of stresses in a concrete pavement due to different applied loads and axle spacings. Project 5001, Dorrance test road. ([Topeka], 1952), by State Highway Commission of Kansas (page images at HathiTrust; US access only)
• A strain gage differential weighing system / (Ogden, Utah : Intermountain Forest and Range Experiment Station, Forest Service, United States Department of Agriculture, 1965), by Erwin H. Breuer and Intermountain Forest and Range Experiment Station (Ogden, Utah) (page images at HathiTrust)
• Strain gage techniques : fundamentals (July 8-12, 1958), applications (July 14-18, 1958) : lectures and laboratory exercises / (Cambridge, Mass. : M.I.T., c1958), by William Mozley Murray, Peter K. Stein, and Massachusetts Institute of Technology (page images at HathiTrust)
• Effect of strain-gage attachment by spotwelding and bonding on fatigue behavior of Ti-6A1-4V, Renʹe 41, and inconel x / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by L. A. Imig, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Results of the first five "data years" of extreme stress scratch-gauge data collected aboard Sea-Land's SL-7's / (Washington, D.C. : U.S. Coast Guard Headquarters ; Springfield, Va. : National Technical Information Service [distributor], 1979), by R. A. Fain, E. T. Booth, United States. Ship Structure Committee, United States Coast Guard, United States. Dept. of Transportation, and Teledyne Engineering Services (page images at HathiTrust)
• Comparison of concurrent strain gage- and presure transducer-measured flight loads on a lifting reentry vehicle and correlation with wind tunnel predictions / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978), by Ming Han Tang, Robert G. Sheldon, Walter J. Sefic, Hugh L. Dryden Flight Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Experimental determination of the temperature and dynamic-strain environment of a tubular combustor liner in a turbojet engine / (Washington, [D.C.] : National Aeronautics and Space Administration, 1960), by Patrick T. Chiarito, C. Robert Morse, William C. Morgan, and Lewis Research Center (page images at HathiTrust)
• A modified T-value method for selection of strain gages for measuring loads on a low aspect ratio wing / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Informaion Branch; [Springfield, Va. : For sale by the National Technical Information Service], 1980), by Ming Han Tang, Robert G. Sheldon, Hugh L. Dryden Flight Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• An electronic strain-level counter for aircraft structural members / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by Felix L. Pitts, J. Larry Spencer, Langley Research Center, and National Aeronautics and Space Administration (page images at HathiTrust)
• A non-rotating vorticity meter / (Washington, D.C. : National Aeronautics and Space Administration, 1967), by Michael C. McMabon and Melvin H. Snyder (page images at HathiTrust; US access only)
• General characteristics of linear strain gage accelerometers used in telemetry / (Washington : National Bureau of Standards : For sale by Supt. of Docs., U.S. G.P.O., 1962), by P. S. Lederer (page images at HathiTrust)
• Strain gage readings. ([Phoenix, Ariz.] Stein Engineering Services.), by Phoenix Stein Engineering Services (page images at HathiTrust; US access only)
• Development of high-temperature strain gages / ([Washington, D.C.] : U.S. Dept. of Commerce, National Bureau of Standards : For sale by the Supt. of Docs., U.S. G.P.O., [1961]), by J.W. Pitts, Dwight Garrison Moore, and United States. National Bureau of Standards (page images at HathiTrust)
• Strain gage techniques: fundamentals (July 15-19, 1957), applications (July 22-26, 1957) (Cambridge, Massachusetts Institute of Technology, c1957), by William M. Murray, Peter K. Stein, and Massachusetts Institute of Technology. Department of Mechanical Engineering (page images at HathiTrust; US access only)
• Strain gage techniques : fundamentals (July 11-15, 1960), applications (July 18-22, 1960) : lectures and laboratory exercises / (Cambridge, Mass. : Massachusetts Institute of Technology, c1960), by William M. Murray, Peter K. Stein, and Massachusetts Institute of Technology. Dept. of Mechanical Engineering (page images at HathiTrust; US access only)
• "Life cycling" test on several strain gage pressure transducers. (Washington : For sale by the Supt. of Docs., U.S. Govt. Print. Off, 1967), by Paul S. Lederer (page images at HathiTrust)
• Apparent strain vs temperature vs cycles for sodium strain gages /, by M. M. Lemcoe, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• High temperature strain gage research : summary report / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1955), by Francis G. Tatnall and Baldwin-Lima-Hamilton Corporation (page images at HathiTrust)
• Transducer preparation gage assembly of the Bureau of Mines three-component borehole deformation gage / ([Washington] : Dept. of the Interior, Bureau of Mines, 1977), by David L. Bickel and United States Bureau of Mines (page images at HathiTrust)
• Stresses induced around mine development workings by undercutting and caving, Climax Molybdenum Mine, Colorado (in two parts). ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by Stephen Utter, Willard John Tesch, and United States Bureau of Mines (page images at HathiTrust)
• Improvements in the three-component borehole deformation gage and overcoring techniques / ([Washington, D.C.] : U.S. Bureau of Mines, [1974]), by Verne E. Hooker, Wilbur I. Stress relief by center hole Duvall, David L. Bickel, James R. Aggson, Denver Mining Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• Calibration of strain gages at high temperature / (Livermore, CA : University of California Lawrence Radiation Laboratory, 1961), by William E. Bostwick, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Apparatus for determining linear thermal expansions of materials in vacuum or controlled atmosphere / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1960), by S. D. Fulkerson, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• Characteristics and behavior of bonded wire resistance strain gages in thermal coefficient of expansion measurements. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, [1950]), by Martin R. Goodman, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Characteristics and behavior of bonded wire resistance strain gages in thermal coefficient of expansion measurements. (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1950), by Martin R. Goodman, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Strain gage / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1950), by John Buchen, Verner Rexroth, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Prototype gages to measure plate spacing in flat fuel-plate subassemblies / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from Office of Technical Services, U.S. Dept. of Commerce, [1959]), by N. E. Miller, William H. Goldthwaite, C. Vernon Weaver, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Calibration of strain-gage installations in aircraft structures for the measurement of flight loads / (Washington, D.C. : National Advisory Committee for Aeronautics, 1953), by T. H. Skopinski, Wilber B. Huston, William S. Aiken, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Experimental and theoretical determination of thermal stresses in a flat plate / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Richard R. Heldenfels, William M. Roberts, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strain gage test at the threaded closure on a thirty-inch pressure vessel / (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Union Carbide Corporation, 1964), by P. J. Long, W. D. Ross, Oak Ridge Y-12 Plant, U.S. Atomic Energy Commission, and Union Carbide Corporation. Nuclear Division (page images at HathiTrust)
• Investigation of gage-placement effects on a stress gage embedded in grout / (Vicksburg, Mississippi : Waterways Experiment Station, 1973), by John Q. Ehrgott, Soils and Pavements Laboratory (U.S.), and Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Characteristics of two commercial high-temperature electric resistance strain gages /, by M. M. Lemcoe, U.S. Atomic Energy Commission, North American Aviation. Atomics International Division, and Liquid Metal Engineering Center (U.S.) (page images at HathiTrust)
• The development of electrical strain gages / (Washington, D.C. : National Advisory Committee for Aeronautics, 1940), by A. V. De Forest, H. Leaderman, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The effect of placement method on the response of soil stress gages / (Vicksburg, Miss. : Waterways Experiment Station, 1967), by Paul F. Hadala, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• A transistorized six-channel airborne strain gage calibrator and excitation unit / (Albuquerque, New Mexico : Sandia Corporation, 1959), by R. H. Gablehouse, C. E. Erickson, U.S. Atomic Energy Commission, and Sandia Corporation (page images at HathiTrust)
• In situ strain orientations : a comparison of three measuring techniques / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, 1971), by R. L. Rough, W. G. Lambert, and United States Bureau of Mines (page images at HathiTrust)
• Draw bench load calibration /, by M. T McGowan, R. M Treco, H. S Rubenstein, U.S. Atomic Energy Commission, and Bridgeport Brass Company (page images at HathiTrust)
• Reduction of strain gage data [technical memorandum / (Washington, D. C. : [available from the Office of Technical Services, Dept. of Commerce] ;, 1962), by Paul H. Adams, Richard C. Dove, and Sandia Corporation (page images at HathiTrust)
• Strain meters and stress meters for embedment in models of mass concrete structures; report, (Vicksburg, Miss., U.S. Army Engineer Waterways Experiment Station, Corps of Engineers, 1968-), by H. G. Geymayer and United States Army Corps of Engineers (page images at HathiTrust; US access only)
• Strain gage techniques: fundamentals (Aug. 9-13, 1954), applications (Aug. 16-20, 1954) (Cambridge, Massachusetts Institute of Technology, c1956), by William M. Murray, Peter K. Stein, and Massachusetts Institute of Technology. Dept. of Mechanical Engineering (page images at HathiTrust)

More items available under narrower terms.