The Online Books Page

Fasteners -- Quality control

See also what's at your library, or elsewhere.

• Fasteners
• Quality control

• Fastener Quality Assurance Act : hearing before the Subcommittee on Commerce, Consumer Protection, and Competitiveness of the Committee on Energy and Commerce, House of Representatives, One Hundred First Congress, first session, on H.R. 777 ... March 15, 1989. (U.S. G.P.O. :, 1989), by Consumer Protection United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Commerce (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Handbook of Fastening and Joining of Metal Parts (first edition; New York et al.: McGraw-Hill, c1956), by Vallory H. Laughner and Augustus D. Hargan (page images at HathiTrust)
• Bolted-connection design (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1987), by Lawrence A. Soltis, Thomas Lee Wilkinson, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Fasteners handbooks. (Book Division, Reinhold Pub. Corp., 1957), by Julius Soled (page images at HathiTrust)
• Dowel bearing strength (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1991), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of moisture cycling on mechanical response of metal-plate connector joints with and without an adhesive interface (U.S. Dept. of Agriculture, Forest Service, Southern Forest Experiment Station, 1995), by Leslie H. Groom and La.) Southern Forest Experiment Station (New Orleans (page images at HathiTrust)
• Bolted connection strength and bolt hold size (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1993), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Review of end grain nail withdrawal research (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2004), by Douglas R. Rammer, Samuel L. Zelinka, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• The threat from substandard fasteners : is America losing its grip? : a report of the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, U.S. House of Representatives. (U.S. G.P.O. :, 1988), by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Oversight and Investigations (page images at HathiTrust)
• Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space and Technology, U.S. House of Representatives, One Hundred first Congress, first session, April 5, 1989. (U.S. G.P.O. :, 1989), by Space United States. Congress. House. Committee on Science (page images at HathiTrust)
• In the matter of certain bag closure clips : investigation no. 337-TA-170 : Commission advisory opinion. (U.S. International Trade Commission, 1985), by United States International Trade Commission (page images at HathiTrust)
• In the matter of certain molded-in sandwich panel inserts and methods for their installation : investigation no. 337-TA-99 (modification proceeding). (U.S. International Trade Commission, 1982), by United States International Trade Commission (page images at HathiTrust)
• Analysis of two alternate damping systems for the geos gravity gradient stablized satellite. (National Aeronautics and Space Administration ;, 1969), by Inc Communications & Systems and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress-intensity factor for a cracked sheet with riveted and uniformly spaced stringers (National Aeronautics and Space Adminstration, May 1971., 1971), by United States National Aeronautics and Space Administration (page images at HathiTrust)
• A metal vacuum lock for a mass spectrometer (United States Atomic Energy Commission, Technical Information Service, 1953), by Chester R. Fultz, L. V. Wilson, Carbide and Carbon Chemicals Corporation, U.S. Atomic Energy Commission, and Oak Ridge Y-12 Plant (page images at HathiTrust)
• A pneumatically operated vacuum lock for mass spectrometers with glass envelopes (Union Carbide Nuclear Company, 1956), by H. S. Corey, Carbide and Carbon Chemicals Corporation, Oak Ridge Y-12 Plant, Union Carbide Nuclear Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Problems associated with high-temperature fasteners (General Electric Company, Nuclear Materials and Propulsion Operation, 1963), by J. C. Blake, R. L. Sundin, H. J. Kurtz, General Electric Company. Nuclear Materials and Propulsion Operation, and U.S. Atomic Energy Commission (page images at HathiTrust; US access only)
• Fasteners and fastening techniques; a compilation. ([For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va.], 1967), by United States. National Aeronautics and Space Administration. Technology Utilization Division (page images at HathiTrust; US access only)
• Extended study of flaw growth at fastener holes. Volume 2, Data tabulation (Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978), by T. M. Hsu, W. M. McGee, Air Force Flight Dynamics Laboratory (U.S.), United States. Air Force. Systems Command, and Lockheed-Georgia Company (page images at HathiTrust)
• Durability methods development. Volume 2, Durability analysis: state-of-the-art assessment (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1979., 1979), by S. D. Manning, Y. N. Kim, W. R. Garver, M. A. Flanders, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation (page images at HathiTrust)
• Durability methods development. Volume 3, Structural durability survey: state-of-the-art assessment (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1979., 1979), by B. J. Pendley, S. D. Manning, S. P. Henslee, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation (page images at HathiTrust)
• Durability methods development. Volume 1, Phase 1 summary (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1979., 1979), by S. D. Manning, J. N. Yang, Masanobu Shinozuka, B. G. W. Yee, J. W. Norris, V. D. Smith, S. P. Henslee, S. M. Speaker, W. R. Garver, B. J. Pendley, General Dynamics Corporation, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Flaw growth in complex structure. Volume 1, Technical discussion (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1977., 1977), by Thomas R. Brussat, M. Creager, S. T. Chiu, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), Del West Engineering, and Lockheed-California Company (page images at HathiTrust)
• Extended study of flaw growth at fastener holes. Volume 1 (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1978., 1978), by T. M. Hsu, J. A. Aberson, W. M. McGee, Air Force Flight Dynamics Laboratory (U.S.), United States. Air Force. Systems Command, and Lockheed-Georgia Company (page images at HathiTrust)
• Durability methods development. Volume 5, Durability analysis methodology development (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1979., 1979), by J. N. Yang, W. R. Garver, S. D. Manning, Air Force Flight Dynamics Laboratory (U.S.), General Dynamics Corporation, and George Washington University (page images at HathiTrust)
• Semielliptical cracks along holes in plates and lugs (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1983., 1983), by A. F. Grandt, D. E. |q Tritsch, J. A. Harter, Air Force Wright Aeronautical Laboratories, Air Force Flight Dynamics Laboratory (U.S.), and Purdue University. School of Aeronautics and Astronautics (page images at HathiTrust)
• Fastening methods for aluminum (Reynolds Metals Co., 1958), by Reynolds Metals Company (page images at HathiTrust; US access only)
• Stress and strain distribution in the vicinity of interference fit fasteners (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1973., 1973), by Merle Allen, J. A. Ellis, United States. Air Force. Systems Command, Air Force Flight Dynamics Laboratory (U.S.), and General Dynamics Corporation. Convair Division (page images at HathiTrust)

• "Standard of excellence" in wood fastenings (Timber Engineering Company, 1960), by Timber Engineering Company (page images at HathiTrust; US access only)

• Current and future applications of mechanical fasteners for light-frame wood structure : proceedings of Mechanical Fasteners Plenary Session at the Forest Products Research Society Annual Meeting (U.S. Dept. of Agriculture, Forest Service, Southern Forest Experiment Station, 1993), by Leslie H. Groom, Forest Products Research Society. Meeting, United States Forest Service, and La.) Southern Forest Experiment Station (New Orleans (page images at HathiTrust)

• Degradation of wood by products of metal corrosion (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1974, 1974), by Andrew J. Baker, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)

• Theoretical basis for design of thermal-stress-free fasteners (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Max L. Blosser, Robert R. McWithey, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• An improved spring cage fastener (U.S. Department of Agriculture, Bureau of Entomology and Plant Quarantine, 1941), by E. W. Davis, C. H. Feltes, and United States. Bureau of Entomology and Plant Quarantine (page images at HathiTrust)

• Military fasteners : changes to specifications are justified ; report to the Chairman, Subcommittee on Investigations, Committee on Armed Services, House of Representatives. (U.S. General Accounting Office, 1991), by United States General Accounting Office and United States House Committee on Armed Services (page images at HathiTrust)

• Standard weight malleable iron or steel screwed unions / U.S. Department of Commerce. (Washington, D.C. : U.S. Department of Commerce, Bureau of Standards, 1930., 1930), by United States. National Bureau of Standards (page images at HathiTrust)

• Holding power of wood screws (U.S. Dept. of Commerce, Bureau of Standards :, 1926), by Iler James Fairchild and United States. National Bureau of Standards (page images at HathiTrust)
• Oversight on the Fastener Quality Act : hearing before the Subcommittee on Science, Technology, and Space of the Committee on Commerce, Science, and Transportation, United States Senate, One Hundred Third Congress, first session, July 28, 1993. (U.S. G.P.O. :, 1994), by Science United States. Congress. Senate. Committee on Commerce (page images at HathiTrust)
• Direct withdrawal and fastener head pull-through performance of selected new commercial structural wood-base sheathing panel materials (Illinois Agricultural Experiment Station, University of Illinois, 1986), by Poo Chow and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Multifrequency eddy current inspection for cracks under fasteners : phase II (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory , Air Force Systems Command, United States Air Force, 1979., 1979), by G. H. Wilson, R. P. Meister, D. T. Hayford, Air Force Materials Laboratory (U.S.), and Battelle Memorial Institute. Columbus Laboratories (page images at HathiTrust)

• Hog ring and ringer manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Hog ring and ringer manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Slide fastener industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Wooden insulator pin and bracket manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Dowel pin manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Corset steel industry (United States Government Printing Office, 1933), by United States National Recovery Administration (page images at HathiTrust)
• Cut tack, wire tack and small staple manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)
• Tubular split and outside pronged rivet manufacturing industry (United States Government Printing Office, 1934), by United States National Recovery Administration (page images at HathiTrust)

• Bolted-connection design (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1987), by Lawrence A. Soltis, Thomas Lee Wilkinson, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Torquing of nuts in aircraft engines. (Society of Automotive Engineers, Special Publications Dept., 1943), by Society of Automotive Engineers. War Engineering Board (page images at HathiTrust)
• Bolted connection strength and bolt hold size (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1993), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Counterfeit metal fasteners : hearings before the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, House of Representatives, One Hundredth Congress, first [and second] sessions. (Washington, DC : United States Government Printing Office, 1988., 1988), by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Oversight and Investigations and United States. Congress 1987-1988). House (page images at HathiTrust)
• Report of the board to recommend a standard gauge for bolts, nuts, and screw-threads for the United States Navy. May, 1868. (Gov't Print. Off., 1880), by United States. Navy Dept. Bureau of Engineering (page images at HathiTrust)
• Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, House of Representatives, One Hundredth Congress, second session, August 9, 1988. (U.S. G.P.O. :, 1988), by Space United States. Congress. House. Committee on Science (page images at HathiTrust)
• Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space and Technology, U.S. House of Representatives, One Hundred first Congress, first session, April 5, 1989. (U.S. G.P.O. :, 1989), by Space United States. Congress. House. Committee on Science (page images at HathiTrust)
• Fatigue tests of plate joints and bolted lugs. ARO project. Final report, September 30, 1954. (Cornell University [Dept. of Engineering Mechanics and Materials, 1954), by J. O. Jeffrey and Cornell University. School of Mechanical Engineering (page images at HathiTrust)
• Bolts, nuts, and large screws of iron or steel : U.S. producers' profits, unfilled orders, inventories, capital expenditures, and capacity, and U.S. importers' unfilled orders, inventories, and prices, annual survey 1978 : report to the president on investigation no. 332-103 under section 332 of the Tariff Act of 1930. (U.S. International Trade Commission, 1979), by James M. Brandon and United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Bolts, nuts, and large screws of iron or steel : U.S. producers' profits, unfilled orders, inventories, capital expenditures, and capacity; U.S. importers' unfilled orders, inventories and prices, annual survey 1980 : report to the President on investigation no. 332 of the Tariff act of 1930 (The Commission, 1981), by United States International Trade Commission and James M. Brandon (page images at HathiTrust)
• Bolts, nuts, and large screws of iron or steel : report to the president on investigation no. TA-201-37 under section 201 of the Trade Act of 1974. (U.S. International Trade Commission, 1978), by United States International Trade Commission, William J. Hable, United States International Trade Commission. Office of the General Counsel, United States International Trade Commission. Office of Economic Research, and United States International Trade Commission. Office of Industries (page images at HathiTrust)
• Bolts, nuts and large screws of iron or steel : report to the president on investigation no. TA-201-27 under section 201 of the Trade Act of 1974. (U.S. International Trade Commission, 1977), by United States International Trade Commission, William J. Hable, United States International Trade Commission. Office of the General Counsel, and United States International Trade Commission. Office of Economic Research (page images at HathiTrust)
• Bolts, nuts, and large screws of iron or steel : report to the President on investigation no. TA-203-11 under section 203 of the Trade Act of 1974. (U.S. International Trade Commission, 1981), by United States International Trade Commission (page images at HathiTrust)
• Research study to provide concepts of panel attachment mechanisms suitable for refurbishable panel application (National Aeronautics and Space Administration ;, 1966), by R. E. Rieckmann, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Analytical and experimental investigation of fatigue in a sheet specimen with an interference-fit bolt (National Aeronautics and Space Administration ;, 1975), by John H. Crews and Langley Research Center (page images at HathiTrust)
• Holding power of drift bolts (1904), by Howard Bruce Murphey (page images at HathiTrust; US access only)
• Report on British standard nuts, bolt-heads, and spanners. (Pub. for the Committee by C. Lockwood & son, 1908), by British Standards Institution, Hay Frederick Donaldson, and Leslie S. Robertson (page images at HathiTrust)
• The National lock washer United States patents, May 29, 1882 .. (s.n., 1886), by National Lock Washer Company (page images at HathiTrust)
• Torquing of bolts for nuclear reactors (Knolls Atomic Power Laboratory, General Electric Company, 1956), by F. J. Mehringer, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust; US access only)
• The design and construction of a strain-gaged resin bolt for the measurement of in-situ axial loads (U.S. Dept. of the Interior, Mining Enforcement and Safety Administration, 1976), by Stephen Gerard Sawyer, Gordon L. Eakin, and United States. Mining Enforcement and Safety Administration (page images at HathiTrust)
• Comparative evaluation of conventional and resin bolting systems (U.S. Dept. of the Interior, Mining Enforcement and Safety Administration, 1976), by George J. Karabin, William J. Debevec, and United States. Mining Enforcement and Safety Administration (page images at HathiTrust)
• Report of Board to recommend a standard gauge for bolts, nuts, and screw-threads, for the United States Navy, May, 1868. (Govt. Print. Off., 1868), by United States. Navy Dept. Bureau of Engineering (page images at HathiTrust)
• An evaluation of new methods for developing proper tensions in high strength structural bolts (s.n.], 1976), by California. Office of Transportation Laboratory and R. F. Prodoehl (page images at HathiTrust; US access only)
• Lateral resistance of anchor bolts installed in concrete (California Dept. of Transportation, Office of Transportation Laboratory ;, 1977), by R. A. Swirsky and California. Office of Transportation Laboratory (page images at HathiTrust)

More items available under broader and related terms at left.