The Online Books Page

Gages -- Calibration

See also what's at your library, or elsewhere.

• Gages
• Measuring instruments -- Calibration
• Calibration

• Depth gage -- Calibration
• Gage blocks -- Calibration
• Pressure gages -- Calibration
• Strain gages -- Calibration
• Vacuum-gages -- Calibration

• Method of calibrating weights for piston gages (U.S. Dept. of Commerce, National Bureau of Standards :, 1971), by H. E. Almer (page images at HathiTrust)
• Calibration of Philips ion gauge (U.S. Atomic Energy Commission, Technical Information Branch, 1950), by J. R. Tolmie, U.S. Atomic Energy Commission, and University of California Radiation Laboratory (page images at HathiTrust)
• Calibration procedure for injector comparator, Bacharach, Model 67-7057, and Kent-Moore, Model J8686BG. (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)
• Calibration procedure for compound and vacuum gages Marsh, types 2 and 3, and Schroeder Brothers Corporation, model GS-5. (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)

• Calibration procedure for depth gages, Roylyn, PN 25545-23B41, PN 25546-23B31, PN 25645-23B31, and Weskler, PN G-5-81-3 and PN G48NH1. (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)

• A gage block measurement process using single wavelength interferometry (U.S. Dept. of Commerce, National Bureau of Standards :, 1975), by John S. Beers (page images at HathiTrust)
• FORTRAN program to determine length of gage blocks using single wavelength interferometry (Dept. of Commerce, National Bureau of Standards, Institute for Basic Standards :, 1977), by Ruth N. Varner and Institute for Basic Standards (U.S.) (page images at HathiTrust)
• Measurement assurance for gage blocks (U.S. Dept. of Commerce, National Bureau of Standards :, 1979), by Carroll Croarkin, Joseph M. Cameron, Clyde Tucker, John S. Beers, Center for Mechanical Engineering and Process Technology (U.S.). Mechanical Processes Division, and Center for Applied Mathematics (U.S.). Statistical Engineering Division (page images at HathiTrust)
• Computer software for measurement assurance of gage blocks (U.S. Dept. of Commerce, National Bureau of Standards :, 1982), by Ruth N. Varner (page images at HathiTrust)

• Calibration procedure for gage block comparator (7913365). (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)

• Extension of gage calibration study in extreme high vacuum: (orbitron and magnetron studies) (National Aeronautics and Space Administration :, 1967), by F. Feakes, F. J. Brock, E. C. Muly, National Research Corporation (U.S.), and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Evaluation of a volume-ratio system for vacuum gage calibration from 10⁻⁸ to 10 torr (National Aeronautics and Space Administration ;, 1969), by Raymond Holanda, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-1729 (National Aeronautics and Space Administration, 1963), by Raymond Holanda, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Calibration procedure for pressure gage, Roylyn, PN 25545-26B21 and Weskler, PN GPH-31-3. (Headquarters, Dept. of the Army, 1984), by United States. Department of the Army (page images at HathiTrust)
• Further experiments on impact-pressure probes in a low-density, hypervelocity flow (Arnold Air Force Station, Tennessee : Arnold Engineering Development Center, Air Force Systems Command, United States Air Force, 1962., 1962), by A. B. Bailey, Inc ARO, Arnold Engineering Development Center, and United States. Air Force. Systems Command (page images at HathiTrust)

• Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Lawrence F. Reardon (page images at HathiTrust)
• Strain-gage bridge calibration and flight loads measurements on a low-aspect-ratio thin wing (National Aeronautics and Space Administration ;, 1975), by Ellwood L. Peele, Clinton V. Eckstrom, and Langley Research Center (page images at HathiTrust)
• Experiments to study strain-gage load calibrations on a wing structure at elevated temperatures (National Aeronautics and Space Administration ;, 1973), by Richard C. Monaghan, Roger A. Fields, and Flight Research Center (U.S.) (page images at HathiTrust)
• Calibration of strain-gage installations in aircraft structures for the measurement of flight loads (National Advisory Committee for Aeronautics, 1953), by T. H. Skopinski, Wilber B. Huston, William S. Aiken, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Draw bench load calibration (Oak Ridge, Tenn. : Technical Information Service Extension, 1955., 1955), by M. T. McGowan, R. M. Treco, H. S. Rubenstein, U.S. Atomic Energy Commission, and Bridgeport Brass Company (page images at HathiTrust)

• Piston manometer as an absolute standard for vacuum-gage calibration in the range 2 to 500 millitorr (National Aeronautics and Space Administration ;, 1972), by Isidore Warshawsky and Lewis Research Center (page images at HathiTrust)
• Piston manometer as an absolute standard for vacuum-gage calibration in the range 10 to 700 microtorr (National Aeronautics and Space Administration ;, 1972), by Isidore Warshawsky and Lewis Research Center (page images at HathiTrust)

• A method for calibration of gas-composition-sensitive pressure gages in condensible vapors (National Aeronautics and Space Administration :, 1965), by Leonard T. Melfi, Paul R. Yeager, and Langley Research Center (page images at HathiTrust)

• Evaluation of a volume-ratio calibration system for vacuum gages from 10⁻⁶ to 10⁻³ torr (National Aeronautics and Space Administration ;, 1965), by Raymond Holanda and Lewis Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Holes, Contours and Surfaces: Located, Machined, Ground and Inspected by Precision Methods (Bridgeport, CT: Moore Special Tool Co., 1955), by Richard F. Moore and Frederick C. Victory (page images at HathiTrust)
• How to get ahead in a defense plant (Thomas Y. Crowell company, 1942), by Kenneth Charles Hawthorne (page images at HathiTrust)
• Standards of length and their practical application. A résumé covering the methods employed for the production of standard gauges, to insure uniformity and interchangeability in every department of manufactures, including the reports of Professor Wm. A. Rogers; the committee on standards and gauges, American society of mechanical engineers; the committee of the Master car-builders' association; and including also the report of the special committee appointed by the Franklin institute, April, 1864. (The Pratt and Whitney company, 1887), by Pratt & Whitney Company and George M. Bond (page images at HathiTrust)
• Workshop gauges and measuring appliances; an introductory treatise on the principal measurements required and the instruments used in workshop practice, for apprentices and students (Sir I. Pitman & sons, ltd., 1924), by Louis Burn (page images at HathiTrust; US access only)
• Modern gaging practice (Engineering magazine Co., 1925), by Albert Atkins Dowd and Frank W. Curtis (page images at HathiTrust)
• Precision measurement and gaging techniques. (Tudor, 1960), by William Grohe (page images at HathiTrust)
• Gages, gaging and inspection : a comprehensive treatise covering the limit system, measuring machines, and measuring tools and gages for originating and comparing measurements in the manufacturing and inspection departments, including means for measuring and inspecting screw threads and gears (The Industrial press; [etc., etc.], 1918), by Douglas T. Hamilton (page images at HathiTrust)
• Gage design : [Gages and precision measurement; hand book] ([s.n.], 1954), by John G. Jergens (page images at HathiTrust)
• Quality control, a handbook of scientific inspection; scientific data and illustrations... (DoAll Service Company, 1945), by Robert James Wilkie, John Allan Harrington, and DoAll Company (page images at HathiTrust)
• Gages and gaging systems; design, construction and use of tools, methods and processes involved (Hill, 1908), by Joseph Vincent Woodworth (page images at HathiTrust)
• Soil and water conservation instruments. Prepared under the direction of C.E. Ramser, Chief, Hydrologic Division. (Washington, 1941), by United States. Soil Conservation Service (page images at HathiTrust)
• Gages and their use in inspection (McGraw-Hill book company, inc., 1942), by Fred H. Colvin (page images at HathiTrust)
• Gages, jigs, and fixtures (International textbook company, 1939), by Edward Griffiths and International Correspondence Schools (page images at HathiTrust; US access only)
• Gage design and gage-making; a treatise on the development of gaging systems for interchangeable manufacture, the design of different types of gages and their production, including precision machining operations, lapping, and various modern appliances for gage measurement (The Industrial press; [etc., etc.], 1920), by Erik Oberg and Franklin Day Jones (page images at HathiTrust; US access only)
• Principles of tool engineering (McGraw-Hill Book Company, inc., 1946), by Raymond R. Bloom (page images at HathiTrust; US access only)
• Jansson handbook of precision measurement (Jansson Gage Co., 1943), by Arthur Clifford and Jansson Gage Company (page images at HathiTrust)
• Tool engineering; punches, dies and gages (McGraw-Hill, 1925), by Albert Atkins Dowd and Frank W. Curtis (page images at HathiTrust)
• Grinding; bench and vise work; gear cutting; erecting; toolmaking. (International Textbook Co., 1903), by International Textbook Company and International Correspondence Schools (page images at HathiTrust)
• Gauges, jigs, dies, tempering, heat treatment, blacksmithing and forging (International Textbook Co., 1915), by International Correspondence Schools (page images at HathiTrust)
• Overcoring equipment and techniques used in rock stress determination (U.S. Dept. of the Interior, Bureau of Mines, 1974), by Verne E. Hooker and David L. Bickel (page images at HathiTrust)
• Improvements in the three-component borehole deformation gage and overcoring techniques (U.S. Bureau of Mines, 1974), by Verne E. Hooker, Wilbur I. Duvall, David L. Bickel, James R. Aggson, Denver Mining Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• Three-component borehole deformation gage for determining the stress in rock (U.S. Dept. of the Interior, Bureau of Mines, 1967), by Robert H. Merrill and United States Bureau of Mines (page images at HathiTrust)
• A device for placing a borehole deformation gage in a horizontal hole (U.S. Dept. of the Interior, Bureau of Mines, 1964), by David W. Wisecarver (page images at HathiTrust)
• Standard gage for sheet and plate iron and steel (Govt. print. off., 1911), by United States. National Bureau of Standards (page images at HathiTrust)
• A modified utilization gauge for western range grasses (USDA Forest Service, Rocky Mountain Forest and Range Experiment Station, 1984), by Earl F. Aldon, Richard E. Francis, and Colo.) Rocky Mountain Forest and Range Experiment Station (Fort Collins (page images at HathiTrust)
• Ion gauge control (Atomic Energy Commission, 1946), by M. Sands, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Developing a gaging system for interchangeable manufacture; an abstract of a treatise describing the principles involved and the procedure followed in the development of a gaging system, based upon the experience of the Pratt & Whitney co., in furnishing gaging equipment for small arms and heavy ordnance work. (Pratt & Whitney company, 1919), by Erik Oberg (page images at HathiTrust)
• Tool and gage work (McGraw-Hill Book Company, Inc., 1923), by Clarence Leon Goodrich and Frank A. Stanley (page images at HathiTrust)
• Effect of different gases on philips gauges (U.S. Atomic Energy Commission. Technical Information Branch, 1944), by Lawrence R. Foote, University of California Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A tilting oil McLeod gauge (U.S. Atomic Energy Commission. Technical Information Division, 1943), by Frank Kirby, University of California Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Interference methods for standardizing and testing precision gage blocks (U.S. Dept. of Commerce, Bureau of Standards :, 1921), by Chauncey George Peters, H. S. Boyd, and United States. National Bureau of Standards (page images at HathiTrust)
• NASA TN D-5285 (National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1969), by Robert L. Summers, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-4681 (National Aeronautics and Space Administration ;, 1968), by William S. Lassiter, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Metrology of gage blocks : proceedings of a symposium on gage blocks held at NBC on August 11 and 12, 1955. (Washington :, 1957), by United States. National Bureau of Standards (page images at HathiTrust)
• NASA TN D-3811 (National Aeronautics and Space Administration :, 1967), by Leonard T. Melfi, Frederick A. Kern, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-1729 (National Aeronautics and Space Administration, 1963), by Raymond Holanda, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Super ion gauge (U.S. Atomic Energy Commission, Technical Information Division, 1950), by F. H. Schmidt, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Tool and gage work (McGraw-Hill Book Company, Inc., 1922), by Clarence Leon Goodrich and Frank A. Stanley (page images at HathiTrust)
• An improved precision height gage. (National Aeronautics and Space Administration; [for sale by Office of Technical Services, Dept. of Commerce], 1963), by Lester B. Vale (page images at HathiTrust)
• Illustrated catalogue and price list. (The Company, 1908), by Ohio) Lunkenheimer Company (Cincinnati (page images at HathiTrust)
• [Original steam gauge works] (Winthrop Press, 1900), by Ashcroft Manufacturing Company (page images at HathiTrust)
• Plain and thread plug and ring gage blanks. (U.S. Govt. print. off., 1930), by American Gage Design Committee (page images at HathiTrust)
• Thompson improved indicator (s.n., 1859), by American Steam Gauge Company (page images at HathiTrust)
• Gages, gaging and inspection ; a comprehensive treatise covering the limit system, measuring machines, and measuring tools and gages for originating and comparing measurements in the manufacturing and inspection departments. (The Industrial press; [etc., etc.], 1918), by Douglas T. Hamilton (page images at HathiTrust)
• Factors influencing dial operation : three-digit multiple-turn dials (United States Atomic Energy Commission, Technical Information Extension ;, 1955), by Roger J. Weldon, H. L. Williams, G. M. Peterson, University of New Mexico. Department of Psychology, Sandia Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• CERC wave gages (Washington, D.C. : U. S. Army Coastal Engineering Research Center, 1969., 1969), by Leo C. Williams and Coastal Engineering Research Center (U.S.) (page images at HathiTrust)
• Military standard; gage inspection. (U.S. Govt. Print. Off., 1951), by United States. Munitions Board. Standards Agency (page images at HathiTrust)
• Home canning : fruits, vegetables. (College Station, Texas : Agricultural Extension Service, Texas A. & M. College System, [1952], 1952), by Texas Agricultural and Mechanical College System. Agricultural Extension Service and United States Department of Agriculture (page images at HathiTrust; US access only)
• Home canning : fruits, vegetables (College Station, Texas : Texas Agricultural Extension Service, [1957], 1957), by Louise Mason, Maeona Cox, Frances Reasonover, Marie Tribble, Texas Agricultural Extension Service, and United States Department of Agriculture (page images at HathiTrust; US access only)
• The US Army Quartermaster School apprenticeship program for the trade of pumper-gauger (petro-chemical). ([Dept. of Defense], Dept. of the Army, Headquarters, 1978), by United States. Department of the Army (page images at HathiTrust)
• Gage blanks, a recorded voluntary standard of the trade published by the U.S. Dept. of Commerce (Washington, D.C. : United States Government Printing Office, 1961., 1961), by United States. Business and Defense Services Administration and United States. National Bureau of Standards (page images at HathiTrust)
• Report on the gauge for the St. Lawrence and Atlantic Rail-road (Printed at the Canada gazette Office, 1847), by A. C. Morton (page images at HathiTrust)
• Response of bubble-gage servomanometers to oscillations in water level (U.S. Dept. of the Interior, Geological Survey, Water Resources Division, 1969), by J. R. Beck, Carl R. Goodwin, California. Dept. of Water Resources, and Geological Survey (U.S.). Water Resources Division (page images at HathiTrust)
• Instructions for the operation, care, and repair of measuring instruments ... (Gov. Prtg. Off., 1924), by United States. Navy Dept. Bureau of Engineering (page images at HathiTrust)
• Experimental investigation of the crack growth gage (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1980., 1980), by Donald R. Holloway, Air Force Wright Aeronautical Laboratories, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• F-4 Service Life Tracking Program (Crack Growth Gages) (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1979., 1979), by Charles R. Saff, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and McDonnell Douglas Corporation (page images at HathiTrust)

More items available under broader and related terms at left.