The Online Books Page

Gas-lubricated bearings

See also what's at your library, or elsewhere.

• Fluid-film bearings
• Gas flow

• Gas-lubricated bearings -- Bibliography
• Gas-lubricated bearings -- Design and construction
• Gas-lubricated bearings -- Mathematical models
• Gas-lubricated bearings -- Testing
• Gas-lubricated journal bearings

• Bearings, Gas-lubricated
• Gas bearings

• Gas-lubricated bearings. (Office of Naval Research; for sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1961), by D.C.) International Symposium on Gas-Lubricated Bearings (1st : 1959 : Washington, Dudley D Fuller, and Pa.) Franklin Institute (Philadelphia (page images at HathiTrust)
• Load carrying capacity of gas-lubricated bearings with inherent orifice compensation using nitrogen and helium gas (U.S. Dept. of Commerce, National Bureau of Standards, 1961), by H. Sixsmith, B. W. Birmingham, and W. A. Wilson (page images at HathiTrust)
• Dynamic behavior of spiral-groove and Rayleigh-step self-acting face seals (National Aeronautics and Space Administation, Scientific and Technical Information Office ;, 1984), by Eliseo DiRusso and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Dynamic response of film thickness in spiral-groove face seals (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by Eliseo DiRusso and Lewis Research Center (page images at HathiTrust)
• Experimental evaluation of foil-supported resilient-pad gas-lubricated thrust bearing (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1977), by Zolton N. Nemeth and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Film thickness measurement for spiral groove and Rayleigh step lift pads self-acting face seals (National Aeronautics and Space Administation, Scientific and Technical Information Branch ;, 1982), by Eliseo DiRusso and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effects of vibration and shock on the performance of gas-bearing space power Brayton cycle turbomachinery. I, Half-sine shock and sinusoidal vibration (National Aeronautics and Space Administration ;, 1971), by Paul R. Spencer, Henry B. Tryon, Peter W. Curwen, and Mechanical Technology Incorporated (page images at HathiTrust)
• Research and development of high-performance axial-flow turbomachinery (National Aeronautics and Space Administration, 1968), by J. T. McCabe, P. W. Curwen, P. Bolan, United States National Aeronautics and Space Administration, Lewis Research Center, and Pratt & Whitney Aircraft Company (page images at HathiTrust)
• Design and fabrication of the Brayton rotating unit (National Aeronautics and Space Administration ;, 1972), by J. E. Davis, Lewis Research Center, and AiResearch Manufacturing Company of Arizona (page images at HathiTrust)
• Alternator and voltage regulator-exciter for a Brayton cycle space power system. I, Design and development (National Aeronautics and Space Administration ;, 1970), by A. M. Dryer, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• Alternator and voltage regulator-exciter for a Brayton cycle space power system. II, Unbalanced electromagnetic forces (National Aeronautics and Space Administration ;, 1970), by J. E. Greenwell, L. J. Yeager, E. F. Russell, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• Testing and evaluation of solid lubricants for gas bearings (National Aeronautics and Space Administration ;, 1974), by P. R. Albrecht, W. H. Fischer, Lewis Research Center, and Mechanical Technology Incorporated (page images at HathiTrust)
• Design, fabrication and testing of a foil gas-bearing test rig (National Aeronautics and Space Administration ;, 1970), by L. Licht, Lewis Research Center, and Ampex Corporation (page images at HathiTrust)
• Optimization of self-acting herringbone-grooved journal bearings for maximum stability (National Aeronautics and Space Administration ;, 1974), by David P. Fleming, Bernard J. Hamrock, and Lewis Research Center (page images at HathiTrust)
• The design of various types of air bearing for stimulating frictionless environments (National Aeronautics and Space Administration, 1962), by Kenneth W. Stark, United States National Aeronautics and Space Administration, and Goddard Space Flight Center (page images at HathiTrust)
• NASA TN D-6096 (National Aeronautics and Space Administration ;, 1970), by James C. Wood, Armen S. Asadourian, Joseph S. Curreri, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Analysis and design of a cantilever-mounted resilient-pad gas-lubricated thrust bearing (U.S. National Aeronautics and Space Administration ;, 1976), by Izhak Etsion, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Analysis of the gas-lubricated flat-sector-pad thrust bearing (National Aeronautics and Space Administration ;, 1976), by Izhak Etsion, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Experimental dynamic stiffness and damping of externally pressurized gas-lubricated journal bearings (National Aeronautics and Space Administration ;, 1976), by David P. Fleming, Robert E. Cunningham, William J. Thayer, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Dual-action gas thrust bearing for improving load capacity (U.S. National Aeronautics and Space Administration ;, 1976), by Izhak Etsion, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-5954 (National Aeronautics and Space Administration :, 1970), by Bernard J. Hamrock, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-5870 (National Aeronautics and Space Administration :, 1970), by David P. Fleming, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-5604 (National Aeronautics and Space Administration ; [For sale for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1969), by Joseph S. Curreri, James C. Wood, Roman Kruchowy, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Evaluation of chromium oxide and molybdenum disulfide coatings in self-acting stops of an air-lubricated Rayleigh step thrust bearing (National Aeronautics and Space Administration ;, 1974), by Zolton N. Nemeth and Lewis Research Center (page images at HathiTrust)

• Gas-lubricated bearings. (Office of Naval Research; for sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1961), by D.C.) International Symposium on Gas-Lubricated Bearings (1st : 1959 : Washington, Dudley D Fuller, and Pa.) Franklin Institute (Philadelphia (page images at HathiTrust)
• A bibliography on gas lubricated bearings (U.S. Atomic Energy Commission, Technical Information Service, 1959), by Eugene B. Sciulli, United States. Maritime Commission, Pa.) Franklin Institute (Philadelphia, United States National Aeronautics and Space Administration, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)

• Analysis of an all-metallic resilient-pad gas-lubricated thrust bearing (National Aeronautics and Space Administration ;, 1974), by William J. Anderson and Lewis Research Center (page images at HathiTrust)

• Analysis of an all-metallic resilient-pad gas-lubricated thrust bearing (National Aeronautics and Space Administration ;, 1974), by William J. Anderson and Lewis Research Center (page images at HathiTrust)

• Performance of a turboalternator gas-bearing system at steady-state conditions (National Aeronautics and Space Administration ;, 1969), by Roman Kruchowy, Joseph S. Curreri, James C. Wood, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Experiments on the steady state characteristics of herringbone-grooved air-lubricated journal bearings (National Aeronautics and Space Administration ;, 1969), by Robert E. Cunningham, William J. Anderson, David P. Fleming, and Lewis Research Center (page images at HathiTrust)

• NASA TN D-5870 (National Aeronautics and Space Administration :, 1970), by David P. Fleming, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Dynamic behavior of air lubricated pivoted-pad journal bearing - rotor system (National Aeronautics and Space Administration :, 1970), by Zolton N. Nemeth, William J. Anderson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-5224 (National Aeronautics and Space Administration ;, 1969), by David P. Fleming, William J. Anderson, Robert E. Cunningham, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Design guide for gas-lubricated tilting-pad journal and thrust bearings with special reference to high-speed rotor (Franklin Institute Research Laboratories, 1964), by Edgar J. Gunter, Dudley D. Fuller, J. G. Hinkle, U.S. Atomic Energy Commission. New York Operations Office, and Columbia University. Franklin Institute Research Laboratories (page images at HathiTrust)

• Stability analysis for unloaded externally pressurized gas-lubricated bearings with journal rotation (National Aeronautics and Space Administration ;, 1968), by David P. Fleming, William J. Anderson, Robert E. Cunningham, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Design of various fixed-geometry water-lubricated hydrodynamic journal bearings for maximum stability (Scientific and Technical Information Office, National Aeronautics and Space Administration; [for sale by the National Technical Information Service, Springfield, Va.], 1973), by Frederick T. Schuller (page images at HathiTrust)
• Fundamentals of fluid film lubrication (NASA Office of Management, Scientific and Technical Information Program, 1991), by Bernard J. Hamrock, Ohio State University. Research Foundation, and Lewis Research Center (page images at HathiTrust)
• Minimum film thickness in elliptical contacts for different regimes of fluid-film lubrication (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Bernard J. Hamrock, D. Dowson, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, and Lewis Research Center (page images at HathiTrust)
• Effect of geometry on hydrodynamic film thickness (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by D. E. Brewe, Christopher M. Taylor, Bernard J. Hamrock, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, University of Leeds, Lewis Research Center, and Propulsion Laboratory (U.S.) (page images at HathiTrust)
• Evaluation of a series hybrid thrust bearing at DN values to three million. (National Aeronautics and Space Administration ;, 1974), by A. Gu, L. W. Winn, M. Eusepi, Lewis Research Center, and Mechanical Technology Incorporated (page images at HathiTrust)
• Development of a high speed parallel hybrid boost bearing (National Aeronautics and Space Administration ;, 1973), by L. W. Winn, M. Eusepi, Lewis Research Center, and Mechanical Technology Incorporated (page images at HathiTrust)
• Rheological effects on friction in elastohydrodynamic lubrication (National Aeronautics and Space Administration ;, 1973), by Edward G. Trachman, H. S. Cheng, Lewis Research Center, and Ill.) Northwestern University (Evanston (page images at HathiTrust)
• Foil bearings for axial and radial support of high speed rotors : design, development, and determination of operating characteristics (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Lazar Licht and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Isothermal elastohydrodynamic lubrication of point contacts (National Aeronautics and Space Administration ;, 1975), by Bernard J. Hamrock, D. Dowson, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6075 (National Aeronautics and Space Administration ;, 1971), by David P. Fleming, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6514 (National Aeronautics and Space Administration ;, 1971), by Fredrick T. Schuller, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6371 (National Aeronautics and Space Administration ;, 1971), by Lester J. Nypan, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A survey of hydrodynamic and hydrostatic lubricated bearings (Atomic Products Division, 1958), by M. A. Koenders, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)

• Analysis of oil-lubricated, fluid-film, thrust bearings with allowance for temperature dependent viscosity (National Aeronautics and Space Administration ;, 1972), by C. H. T. Pan, S. B. Malanoski, Lewis Research Center, and Mechanical Tchnology Incorporated (page images at HathiTrust)

• Transient journal bearing analysis (National Aeronautics and Space Administration ;, 1970), by Robley Gordon Kirk, Edgar J. Gunter, Lewis Research Center, and University of Virginia. Dept. of Mechanical Engineering (page images at HathiTrust)

• Experimental evaluation of the series-hybrid rolling-element bearing (National Aeronautics and Space Administration ;, 1970), by Richard J. Parker and Lewis Research Center (page images at HathiTrust)

More items available under broader and related terms at left.