The Online Books Page

Gaskets

See also what's at Wikipedia, your library, or elsewhere.

• Sealing (Technology) -- Equipment and supplies
• Machinery
• Packing (Mechanical engineering)
• Washers (Fasteners)

• Ordnance materials handbook : gasket materials (nonmetallic). ([Washington, D.C.] : Ordnance Corps, 1956), by United States. Army. Ordnance Corps (page images at HathiTrust)
• Evaluation of elastomers as gasket materials in pneumatic and hydraulic systems / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972), by C. W. Bright, B. J. Lockhart, John F. Kennedy Space Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• United States government master specification for gaskets, metallic-encased. Federal specifications board, specification no. 485 ... ([Washington, Govt. print. off., 1927]), by United States. Bureau of Standards and no. 485 United States. Federal specifications board. Standard specification (page images at HathiTrust; US access only)
• Adhesives, sealants, and gaskets; a survey, (Washington, Technology Utilization Division, Office of Technology Utilization, National Aeronautics and Space Administration; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1967), by R. B. Perkins and S. N. Glarum (page images at HathiTrust; US access only)
• A brief survey of production techniques used at LASL for fabrication of custom gaskets / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1963), by Pierre F. Hartshorne, James S. Church, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• United States government master specification for gaskets, metallic-encased / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards, 1927), by United States. Bureau of Standards and United States. National Bureau of Standards. Circular (page images at HathiTrust)
• The use of indium in high-vacuum equipment / (Berkeley, Ca. : Lawrence Radiation Laboratory, 1955), by F. L. Reynolds, U.S. Atomic Energy Commission. TID., Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Radiation Laboratory (page images at HathiTrust)
• "Grooveless flange gaskets" and their installation / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Branch, 1949), by Alan J. Samuel, University of California Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Inflatable gasket for the 72-inch bubble chamber / (Berkeley, Ca. : Lawrence Radiation Laboratory, 1959), by Luther R. Lucas, Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Gamma radiation damage studies of organic protective coatings and gaskets / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1956), by J. C. Bresee, J. S. Watson, C. D. Watson, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• High vacuum flange test of a bakeable aluminum wire seal / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by J. D. Redman, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Chemistry Division (page images at HathiTrust)
• United States government master specification for rubber packings and gaskets (molded, sheet, and strip). : Federal specifications board specification no. 111a. ([Washington : Govt. Print. Off., 1925]), by United States. Bureau of Standards and no. 111a United States. Federal specifications board. Standard specification (page images at HathiTrust)
• Preparation and testing of a titanium-lined pipe section for standard ring-joint gaskets / (Oak Ridge, Tenn. : Union Carbide Nuclear Company, Oak Ridge Gaseous Diffusion Plant, 1957), by D. B. Woodbridge, R. G. Trehearne, R. C. Kinser, V. M. Hovis, U.S. Atomic Energy Commission, Union Carbide Nuclear Company, and Oak Ridge Gaseous Diffusion Plant (page images at HathiTrust)
• Gasket failures in plutonium reduction furnaces MT-27-64 /, by W. V. Conner, U.S. Atomic Energy Commission, and Dow Chemical Company. Rocky Flats Division (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• An investigation of leakage of large-diameter O-ring seals on spacecraft air-lock hatches / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]), by Otto F. Trout and Langley Research Center (page images at HathiTrust)

• Engineer's Handbook of Piston Rings, Sealing Rings, Mechanical Shaft Seals (7th edition; c1959), by Koppers Company Metal Products Division (page images at HathiTrust)
• Nitrided-steel piston rings for engines of high specific power / (Washington, D.C. : National Advisory Committee for Aeronautics, [1944]), by John H. Collins, Ralph F. Schmiedlin, Edmond E. Bisson, Aircraft Engine Research Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)

• Stresses in rings. ([Washington, D.C.?] : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1958]), by J. Walter Joseph, Savannah River Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stresses in rings / ([Aiken, South Carolina] : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1957), by John W. Walker, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)

• Criteria for use of seal coats on airport pavements / (Washington, D.C. : Federal Aviation Administration, Research and Development Service ; Springfield, Va. : Available through the National Technical Information Service, [1992]), by Chhote L. Saraf, V. R. Kumar, Kamran Majidzadeh, Resource International, and United States. Federal Aviation Administration. Research and Development Service (page images at HathiTrust)
• Reactor coolant shaft seal stability during station blackout / (Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, 1987), by David B. Rhodes, Ron G. Wensel, Robert C. Hill, Idaho National Engineering Laboratory, Chalk River Nuclear Laboratories, Limited Atomic Energy of Canada, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, and EG & G Idaho (page images at HathiTrust)
• An evaluation of tailings ponds sealants, (Corvallis, Or., National Environmental Research Center, Office of Research and Development, U.S. Environmental Protection Agency; for sale by the Supt. of Docs., U.S. Govt. Print. Off., Washington, 1974), by Don A Clark, James E Moyer, Or.) National Environmental Research Center (Corvallis, and United States. Environmental Protection Agency. Office of Research and Development (page images at HathiTrust; US access only)
• In the matter of certain anaerobic impregnating compositions and components therefor : investigation no. 337-TA-71. (Washington, D.C. : U.S. International Trade Commission, [1980]), by United States International Trade Commission (page images at HathiTrust)
• Friction and wear of several compressor gas-path seal materials / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978), by Robert C. Bill, Donald W. Wisander, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Field tests of sodium carbonate as a sealant to reduce seepage losses from canals, (Denver, U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, 1965), by Mansil W. Scrivner (page images at HathiTrust; US access only)
• Adhesives, sealants, and gaskets; a survey, (Washington, Technology Utilization Division, Office of Technology Utilization, National Aeronautics and Space Administration; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1967), by R. B. Perkins and S. N. Glarum (page images at HathiTrust; US access only)
• Improved sealants for infiltration control: the development and demonstration of materials to reduce or eliminate water infiltration into sewerage (Washington, Federal Water Pollution Control Administration; for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1969), by Western Company and United States. Federal Water Pollution Control Administration (page images at HathiTrust)
• Superfluid helium leak sealant study / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by John W. Vorreiter, Ames Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Rehabilitation of prestressed concrete bridge components by non-electrical (conventional) methods / (McLean, VA : Federal Highway Administration ; [Springfield, Va. : Available through the National Technical Information Service, 1999]), by D. Whiting, Construction Technology Laboratories (Portland Cement Association), and United States. Federal Highway Administration (page images at HathiTrust)
• Evaluation of rust compatible primers for marine applications. (1984) (page images at HathiTrust; US access only)
• Tank sealing with coating materials. (1983) (page images at HathiTrust; US access only)
• Waterborne coatings for marine applications. (1981) (page images at HathiTrust; US access only)
• Cathodic protection/partial coatings versus complete coating in ballast tanks - a project update. (1985) (page images at HathiTrust; US access only)
• The effect of edge preparation on coating life - phase two. (1985) (page images at HathiTrust; US access only)
• Sealants and cold regions pavement seals : a review / ([Hanover, NH] : US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory ; [Springfield, Va. : Available from NTIS, 1995]), by Stephen A. Ketcham, Cold Regions Research and Engineering Laboratory (U.S.), and United States. Army. Office of the Chief of Engineers (page images at HathiTrust)
• State-of-the-art survey of flexible pavement crack sealing procedures in the United States / (Hanover, New Hampshire : U.S. Army Cold Regions Research and Engineering Laboratory, 1992), by Robert A. Eaton, Jane Ashcraft, and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Achievement of a low-outgassing white paint system for spacecraft thermal control / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Benjamin Seidenberg, Carroll H. Clatterbuck, John J. Park, and Goddard Space Flight Center (page images at HathiTrust)
• Nonmetallic materials handbook / ([Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1979-1982), by Stanley E. Podlaseck, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, and Langley Research Center (page images at HathiTrust)
• Isolation and evaluation of canal subsurface membranes produced by a waterborne petroleum-based, emulsion-type soil sealant : West Side Lateral, Eden Project, Wyoming : lower cost canal lining program / (Denver, Colo. : U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, 1963), by F. H. Geier and United States. Bureau of Reclamation. Office of Chief Engineer (page images at HathiTrust)
• PSU/WES interlaboratory comparative methodology study of an experimental cementitious repository seal material : technical report / (Columbus, Ohio : Battelle Memorial Institute. Office of Nuclear Waste Isolation, 1980), by D. M. Roy, Katharine Mather, M. W. Grutzeck, United States. Department of Energy, Battelle Memorial Institute. Office of Nuclear Waste Isolation, Battelle Memorial Institute. Project Management Division, Structures Laboratory (U.S.), and Pennsylvania State University. Materials Research Laboratory (page images at HathiTrust)
• Improved materials and processes for sealing and resealing joints in Portland cement concrete pavements : laboratory study / ([Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; Springfield, Va. : Available from National Technical Information Service, 1993]), by Larry N. Lynch, James Chehovits, D. W. White, U.S. Army Engineer Waterways Experiment Station, United States Army Corps of Engineers, and Construction Productivity Advancement Research Program (page images at HathiTrust)
• Surface treatments to minimize concrete deterioration. ([Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; Springfield, Va. : Available from National Technical Information Service, 1990]), by Tony B. Husbands, F. E. Causey, U.S. Army Engineer Waterways Experiment Station, United States Army Corps of Engineers, and Evaluation Repair (page images at HathiTrust)
• Improved materials and processes for sealing and resealing joints in Portland cement concrete pavements : field evaluation / ([Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station, 1993]), by Larry N. Lynch, James Chehovits, D. W. White, Construction Productivity Advancement Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
• Polymeric sealant used to stop shale degradation in coal mines / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines ;, 1977), by John C. Franklin, United States. Bureau of Mines. Technical Progress Report, and United States. Bureau of Mines. Coal Mine Health and Safety Program (page images at HathiTrust)
• Magnesium oxysulfate cement sealant in coal mines / ([Washington] : U.S. Dept. of the Interior, Bureau of Mines, 1976), by Jack E. Fraley and Robert E. Simpson (page images at HathiTrust)
• Plastic calking materials / (Washington, D.C. : U.S. Dept. of Commerce, National Bureau of Standards : U.S. Govt. Print. Off., 1940), by D. W. Kessler, W. H. Sligh, A. Hockman, K. A. Milliken, J. J. Tregoning, and United States. National Bureau of Standards. Building Materials and Structures Report (page images at HathiTrust)
• Stone consolidating materials : a status report / (Washington : Dept. of Commerce, National Bureau of Standards : For sale by the Supt. of Docs., U.S. Govt. Print. Off., 1980), by James R. Clifton, United States. National Bureau of Standards, and Center for Building Technology (page images at HathiTrust)
• Dry-process-sprayed coal mine sealants, a progress report / ([Washington, D.C.] : Dept. of the Interior, Bureau of Mines, [1977]), by J. E. Fraley and D. J. Cox (page images at HathiTrust)
• Dry-process-sprayed coal mine sealants, an updated progress report / ([Washington, D.C.] : Dept. of the Interior, Bureau of Mines, [1978]), by J. E. Fraley (page images at HathiTrust)
• Laboratory evaluation of spray-applied rigid urethane foams / (Pgh. [i.e. Pittsburgh] Pa. : U.S. Dept. of the Interior, Bureau of Mines, 1985), by Robert J. Timko, Edward D. Thimons, and Mervin D. Marshall (page images at HathiTrust)
• Contraction joint sealing systems, San Luis Drain, Central Valley Project : evaluation of cores containing preformed polysulfide rubber strips machine extruded polysulfide rubber sealant, and polyvinyl chloride plastic contraction joint forming waterstop / (Denver, Colo. : U.S. Dept. of the Interior, Bureau of Reclamation, Office of Chief Engineer, [1970]), by Henry Johns and United States. Bureau of Reclamation. Office of Chief Engineer (page images at HathiTrust)
• Facilities technology application tests, fuel-resistant pavement sealers / (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; [Springfield, Va.] : [Available from National Technical Information Service], [1986]), by James E. Shoenberger, Elton R. Brown, United States Army Corps of Engineers, and U.S. Army Engineer Waterways Experiment Station (page images at HathiTrust)
• Fuel spillage, traffic, and blast testing of maintenance materials for rubberized-tar concrete airfield pavements : report 1 : 1956-1957 tests. (Vicksburg, Miss. : Waterways Experiment Station, 1959), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Investigation of nonmetallic waterstops : report 3 : progress report of laboratory and field exposure tests. (Vicksburg, Miss. : Waterways Experiment Station, 1963), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Investigation of nonmetallic waterstops : report 4 : water retentivity and tensile strength of splices / (Vicksburg, Miss. : Waterways Experiment Station, 1965), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Investigation of nonmetallic waterstops : report 5 : water retentivity of labyrinth-shaped waterstops / (Vicksburg, Miss. : Waterways Experiment Station, 1971), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Investigation of nonmetallic waterstops : report 7 : preparation of laboratory test samples from finished waterstops / (Vicksburg, Miss. : Waterways Experiment Station, 1970), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Investigation of nonmetallic waterstops : report 8 : effect of specimen size and low temperature on waterstop test results / (Vicksburg, Miss. : Waterways Experiment Station, 1972), by Billy J. Houston, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Study of air permeability of concrete paints and sealants for reactor housing installations : preliminary report / (Canoga Park, California : Atomics International, [1960]), by L. Baurmash, C. T. Nelson, R. H. Seefred, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Additives in bituminous materials and fuel-resistant sealers / (Atlantic City International Airport, N.J. : Federal Aviation Administration Technical Center ; Springfield, Va. : Available through the National Technical Information Service, [1994]), by Gary L. Anderton, Laurand H. Lewandowski, Geotechnical Laboratory (U.S.), and Federal Aviation Administration Technical Center (U.S.) (page images at HathiTrust)
• Joint sealants for airport pavements : phase I, laboratory and field investigations / (Washington, D.C. : Federal Aviation Administration, Advanced System Design Service ; Springfield, Va. : Available through the National Technical Information Service, [1988]), by C. M. Inaba, T. Novinson, M. C. Hironaka, Calif.) Naval Civil Engineering Laboratory (Port Hueneme, and United States. Federal Aviation Administration. Advanced System Design Service (page images at HathiTrust)
• Treatment of wastewaters from adhesives and sealants manufacture by ultrafiltration / (Cincinnati, Ohio : Environmental Protection Agency, Office of Research and Development, Industrial Environmental Research Laboratory ; Springfield, Va. : for sale by the National Technical Information Service, 1978), by Myles H. Kleper, Inc. Walden Research Division Abcor, and Ohio) Industrial Environmental Research Laboratory (Cincinnati (page images at HathiTrust)
• Further studies of epoxy bonding compounds. Physical research project no. 13 ([Albany] Bureau of Physical Research, 1963), by Haaren A. Miklofsky and Rensselaer Polytechnic Institute (page images at HathiTrust)

More items available under broader and related terms at left.