The Online Books Page

Heat resistant alloys

See also what's at your library, or elsewhere.

Broader terms:

Narrower terms:

Used for:

High temperature metals
Refractory metals
Superalloys

Filed under: Heat resistant alloys

alloys based on high-melting compounds ([Wright-Patterson Air Force Base, Ohio, Foreign Technology Division, Air Force Systems Command], 1962), by G. V. Samsonov and K. L. Portnoĭ (page images at HathiTrust; US access only)
Guidelines for identification of metals ; supply. ([Washington], 1964), by United States Department of the Air Force (page images at HathiTrust)
Availability of critical scrap metals containing chromium in the United States : wrought stainless steels and heat-resisting alloys (U.S. Dept. of the Interior, Bureau of Mines :, 1980), by Charles L. Kusik, Michel R. Mounier, and H. V. Makar (page images at HathiTrust)
Low-chromium heat-resisting ferritic alloys strengthened by the chi phase (U.S. Dept. of the Interior, Bureau of Mines, 1984), by M. L. Glenn and J. S. Dunning (page images at HathiTrust)
The system Al₄C₃-AlN-Al₂O₃ : powder forming and sintering behavior, phase identification, and refractory composition properties (U.S. Dept. of Interior, Bureau of Mines, 1969), by Jack L. Henry, Hal J. Kelly, J. H. Russell, and United States Bureau of Mines (page images at HathiTrust)
Electrodeposition studies of molybdenum, tungsten, and vanadium in organic solvents (U.S. Bureau of Mines, 1963), by Robert E. Meredith, Thomas T. Campbell, and United States Bureau of Mines (page images at HathiTrust)
Experimental extraction of strategic components from S-816 alloy scrap (U.S. Dept. of the Interior, Bureau of Mines, 1961), by H. Kenworthy, Aaron G. Starliper, and V. A. Nieberlein (page images at HathiTrust)
Electrodeposition of thick coatings of platinum and palladium on refractory metals from aqueous electrolytes (U.S. Dept. of the Interior, Bureau of Mines, 1967), by David Schlain, Richard L. Andrews, Charles B. Kenahan, and Stephen D. Cramer (page images at HathiTrust)
Development of columbium and tantalum alloys for elevated-temperature service (U.S. Dept. of the Interior, Bureau of Mines, 1964), by H. Kato, G. Asai, R. E. Siemens, and Herbert R. Babitzke (page images at HathiTrust)
Dissimilar metal welds of certain superalloys and stainless steels (Hanford Atomic Products Operation, 1963), by R. L. Knecht, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
High-temperature mechanical properties of Hastelloy B amd Hastelloy W (Oak Ridge National Laboratory, 1958), by C. R. Kennedy, D. A. Douglas, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
The recrystallization and grain growth of Inconel (Oak Ridge National Laboratory, 1958), by D. A. Douglas, J. R. Weir, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
Refractory metal constitution diagrams (Wright Air Development Division, Air Research and Development Command, U.S. Air Force, 1960), by Inc. Nuclear Metals and Albert Rudolph Kaufmann (page images at HathiTrust)
The vaporization and physical properties of certain refractories. (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by Avco Corporation. Research and Advanced Development Division (page images at HathiTrust)
Investigation of the Ti-Al-Cb system as a source of alloys for use at 1200⁰-1800⁰F (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by Joseph B. McAndrew and Charles R. Simcoe (page images at HathiTrust)
Mechanical properties of selected alloys at elevated temperatures (Wright Air Development Division, Air Research and Development Command, U.S. Air Force; [distributed by U.S. Dept. of Commerce, Office of Technical Services, Washington], 1960), by Bell Aircraft Corporation. Engineering and Research Laboratories, George F. Kappelt, and Harry Aaron Pearl (page images at HathiTrust)
Investigation of diffusion barriers for refractory metals (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by Inc Manufacturing Laboratories and E. M. Passmore (page images at HathiTrust)
Thermodynamics of chemical species important to rocket technology. (U.S. Dept. of Commerce, National Bureau of Standards, 1973), by Thomas B. Douglas, Charles W. Beckett, United States. National Bureau of Standards. Physical Chemistry Division, and United States. National Bureau of Standards (page images at HathiTrust)
Analysis of thermoelectric properties of high-temperature complex alloys of nickel-base, iron-base, and cobalt-base groups (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Raymond Holanda and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Thermal-fatigue and oxidation resistance of cobalt-modified Udimet 700 alloy (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1986), by Peter T. Bizon, Betty J. Barrow, and Lewis Research Center (page images at HathiTrust)
Oxidation and emittance of superalloys in heat shield applications (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1986), by Karl E. Wiedemann, Jalaiah Unnam, Ronald K. Clark, and Langley Research Center (page images at HathiTrust)
An update of the total-strain version of SRP (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by James F. Saltsman, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
Thermal fatigue resistance of NASA WAZ-20 alloy with three commercial coatings (National Aeronautics and Space Administration ;, 1975), by Peter T. Bizon, Robert E. Oldrieve, and Lewis Research Center (page images at HathiTrust)
Carburization and heat treatment to cause carbide precipitation in gamma gamma prime-delta eutectic alloys (National Aeronautics and Space Administration ;, 1977), by Surendra N. Tewari, Robert L. Dreshfield, and Lewis Research Center (page images at HathiTrust)
Oxidation resistant materials for transpiration cooled gas turbine blades II Wire specimen tests (National Aeronautics and Space Administration, 1968), by Fred W. Cole, Andrew R. Spencer, James B. Padden, and Bendix Corporation (page images at HathiTrust)
Oxidation resistant materials for transpiration cooled gas turbine blades I Sheet specimen screening tests (National Aeronautics and Space Administration, 1968), by Fred W. Cole, Andrew R. Spencer, James B. Padden, and Bendix Corporation (page images at HathiTrust)
Oxidation resistant porous material for transpiration cooled vanes (National Aeronautics and Space Administration ;, 1972), by P. Madsen, Robert M. Rusnak, Lewis Research Center, and Bendix Corporation (page images at HathiTrust)
Weldability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessman, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
Long-time temperature stability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessman, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
Effect of contamination level on weldability of refractory metal alloys. (National Aeronautics and Space Administration ;, 1970), by D. R. Stoner, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
Post weld annealing studies of T-111. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessmann, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
Weldability of tungsten base alloys. (National Aeronautics and Space Administration ;, 1970), by G. G. Lessmann, United States National Aeronautics and Space Administration, Lewis Research Center, and Westinghouse Astronuclear Laboratory (page images at HathiTrust)
Environmental crack-growth behavior of high-strength pressure vessel alloys (National Aeronautics and Space Administration ;, 1975), by Royce G. Forman, Lyndon B. Johnson Space Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
NASA TN D-2495 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1964), by John C. Freche, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-5131 (National Aeronautics and Space Administration ;, 1969), by Stanley G. Young, L. Leonard, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Effects of carbon and hafnium concentrations in wrought powder-metallurgy superalloys based on NASA IIB-11 alloy (National Aeronautics and Space Administration ;, 1976), by Robert V. Miner and Lewis Research Center (page images at HathiTrust)
NASA TN D-6147 (National Aeronautics and Space Administration ;, 1971), by Robert L. Dreshfield, Gary D. Sandrock, John C. Freche, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-5783 (National Aeronautics and Space Administration :, 1970), by Robert L. Dreshfield, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
NASA TN D-5873 (National Aeronautics and Space Administration ;, 1970), by Paul E. Moorhead, Phillip L. Stone, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-6015 (National Aeronautics and Space Administration :, 1970), by Robert L. Dreshfield, Richard L. Ashbrook, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Materials technology programs in support of a mercury rankine space power system (National Aeronautics and Space Administration ;, 1973), by Phillip L. Stone and Lewis Research Center (page images at HathiTrust)
NASA TN D-4652 (National Aeronautics and Space Administration ;, 1968), by Harold E. Sliney, Robert L. Johnson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-6317 (National Aeronautics and Space Administration ;, 1971), by Robert M. Caves, Salvatore J. Grisaffe, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-2561 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington, D.C. 20230], 1965), by Peter L. Raffo, Walter R. Witzke, William D. Klopp, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-3886 (National Aeronautics and Space Administration :, 1967), by Donald W. Petrasek, John W. Weeton, Robert A. Signorelli, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-3075 (National Aeronautics and Space Administration :, 1965), by Edward P. Phillips, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
Range of interface thermal conductance for aircraft joints (National Aeronautics and Space Administration, 1960), by Martin E. Barzelay and Syracuse University (page images at HathiTrust)
Vacuum-induction, vacuum-arc, and air-induction melting of a complex heat-resistant alloy (National Aeronautics and Space Administration, 1959), by Raymond Frank Decker, J. W. Freeman, John P. Rowe, and University of Michigan (page images at HathiTrust)
NASA TN D-6290 (National Aeronautics and Space Administration ;, 1971), by Carl E. Lowell, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-6560 (National Aeronautics and Space Administration ; [For sale for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1971), by John C. Freche, William J. Waters, Richard L. Ashbrook, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Fast neutron reactivity effects for refractory metallic samples measured in a thermal homogeneous reactor (National Aeronautics and Space Administration ;, 1971), by Clarence R. Pierce, Donald F. Shook, Daniel Fieno, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Metals and Ceramics Division [and] Isotopes Division. (Oak Ridge National Laboratory, 1971), by J. R. DiStefano, R. E. McHenry, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Hard compounds of refractory metals (National Aeronautics and Space Administration, 1962), by G. V. Samsonov and Umanskiĭ I︠A︡. S. (page images at HathiTrust; US access only)
Availability of critical scrap metals containing chromium in the United States : wrought stainless steels and heat-resisting alloys (U.S. Dept. of the Interior, Bureau of Mines :, 1980), by Charles L. Kusik, Michel R. Mounier, and H. V. Makar (page images at HathiTrust)
The heat treatment and working of Haynes 25 alloy (United States Atomic Energy Commission, 1953), by W. Kermit Anderson, J. W. Frank, J. H. Jackson, A. M. Hall, H. A. Blank, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
Investigation of influence of chemical composition on forged modified low-carbon N-155 alloys in solution-treated and aged condition as related to rupture properties at 1200° F (National Advisory Committee for Aeronautics, 1951), by E. E. Reynolds, A. E. White, J. W. Freeman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
Survey of portions of the chromium-cobalt-nickel-molybdenum quaternary system at 1200° C (National Advisory Committee for Aeronautics, 1952), by Sheldon Paul Rideout, Paul A. Beck, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
Feasibility study of the co-extrusion of refractory metal clad reactor fuel elements (Los Alamos Scientific Laboratory of the University of California, 1964), by J. M. Dickinson, T. J. Ready, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Oxidation studies of some refractory metals (Ames Laboratory, 1964), by James Henry Witte, Harley A. Wilhelm, U.S. Atomic Energy Commission, and Ames Laboratory (page images at HathiTrust)
Program to develop a wrought blade superalloy (General Electric, Nuclear Materials and Propulsion Operation, 1961), by Wilford H. Couts, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
Creep-rupture properties of Inconel 713C (Technical Services, Department of Commerce, 1960), by J. C. Bokros, United States Maritime Administration, U.S. Atomic Energy Commission, and General Dynamics Corporation. General Atomic Division (page images at HathiTrust)
Development and evaluation of B₄C-graphite control-rod materials for the HTGR (General Atomic Division of General Dynamics Corporation ;, 1962), by W. V. Goeddel, U.S. Atomic Energy Commission, and General Dynamics Corporation. General Atomic Division (page images at HathiTrust; US access only)
Comparison of high energy rate (Dynapak) and conventional extrusion of refractory metals (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Dirk G. Rabenold, Westinghouse Electric Corporation, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
Basic chemistry of high temperature inorganic systems : semiannual progress report (Atomics International ;, in the 20th century), by U.S. Atomic Energy Commission. Technical Information Center and North American Aviation. Atomics International Division (page images at HathiTrust)
Refractory metals and their alloys : a literature search (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, [1959], 1959), by Theodore F. Davis and U.S. Atomic Energy Commission (page images at HathiTrust)
Investigation of feasibility of utilizing available heat resistant materials for hypersonic leading edge applications (Aeronautical Systems Division, Air Force Systems Command, U. S. Air Force, 1960), by Bell Aircraft Corp and Frank M. Anthony (page images at HathiTrust)
Procedures for electroplating coatings on refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by John G. Beach, John A. Gurklis, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
A brief review of refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, [1959], 1959), by Robert Isaac Jaffee, Defense Metals Information Center (U.S.), and Battelle Memorial Institute (page images at HathiTrust)
Recent developments in superalloys (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1960., 1960), by H. J. Wagner and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Physical and mechanical properties of the cobalt-chromium-tungsten alloy WI-52 (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by F. R. Morral, H. J. Wagner, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Development of refractory metal sheet in the United States (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by Robert Isaac Jaffee, Nathan E. Promisel, W. J. Harris, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Review of recent developments on oxidation-resistant coatings for refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by William D. Klopp and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Introduction to metals for elevated-temperature use (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by James E. Campbell, B. C. Allen, R. W. Douglass, H. J. Wagner, H. B. Goodwin, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Department of Defense refractory metals sheet-rolling program : status report no. 1 (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by H. R. Ogden, Defense Metals Information Center (U.S.), and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
Ductile-brittle transition in the refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by F. R. Schwartzberg, Robert Isaac Jaffee, H. R. Ogden, Defense Metals Information Center (U.S.), and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
A summary of comparative properties of air-melted and vacuum-melted steels and superalloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by D. C. Ludwigson, F. R. Morral, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Strain aging of refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by A. G. Imgram and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Melting and casting of the refractory metals molybdenum, columbium, tantalum, and tungsten (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by W. H. Johnson, Defense Metals Information Center (U.S.), and United States. Office of the Assistant Secretary of Defense (Research and Development) (page images at HathiTrust)
Physical metallurgy of nickel-base superalloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by C. H. Lund and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Coatings for the protection of refractory metals from oxidation (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by Carol Alnoth Krier and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Semiaustenitic precipitation-hardenable stainless steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by D. C. Ludwigson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Status Report No. 2 on department of defense refractory metals sheet-rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1962., 1962), by H. R. Ogden and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Design considerations in selecting materials for large solid-propellant rocket-motor cases (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1962., 1962), by Charles Wesley Bert, Walter S. Hyler, Defense Metals Information Center (U.S.), Battelle Memorial Institute. Defense Metals Information Center, and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
Structural considerations in developing refractory metal alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1963., 1963), by R. I. Jaffee, G. T. Hahn, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Summary of the seventh meeting of the refractory composites working group (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1963., 1963), by W. A. Gibeaut, H. R. Ogden, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
The effect of fabrication history and microstructure on the mechanical properties of refractory metals and alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1963., 1963), by A. G. Imgram, H. R. Ogden, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Properties of coated refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1964., 1964), by W. A. Gibeaut, E. S. Bartlett, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
The effects of heat-treating and testing environments on the properties of refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1964., 1964), by F. F. Schmidt, H. R. Ogden, D. J. Maykuth, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Department of Defense refractory metals sheet rolling program : status report No. 3 (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1965., 1965), by D. J. Maykuth and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Comparison of chemical analyses of refractory alloys : a survey conducted by the materials advisory board as part of the refractory metals sheet rolling program (rmsrp) (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1965., 1965), by D. L. Chase and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Review of recent developments on oxidation-resistant coatings for refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by William D. Klopp and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Machining of superalloys and refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by C. T. Olofson, F. W. Boulger, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Review of recent developments on oxidation-resistant coatings for refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, [1961], 1961), by William D. Klopp and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Notes on the forging of refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by H.-J. Henning, F. W. Boulger, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Summary of the second and third technical briefings on refractory metal alloy structural fasteners (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1962., 1962), by W. S. Hyler, R. M. Evans, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Production problems associated with coating refractory-metal hardware for aerospace vehicles (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1963., 1963), by W. A. Gibeaut, E. S. Bartlett, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Ignition of metals in oxygen (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by E. L. White, J. J. Ward, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Summary of contractor results in support of the refractory metals sheet rolling program (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by D. J. Maykuth and Defense Metals Information Center (U.S.) (page images at HathiTrust)
A primer on Soviet superalloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by J. Prock, H. J. Wagner, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
The refractory metals : an evaluation of availability (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1968., 1968), by F. H. Buttner and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Rupture strengths of selected high-iron, nickel-base, cobalt-base, and refractory metal alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1968., 1968), by Ward F. Simmons and Defense Metals Information Center (U.S.) (page images at HathiTrust)
Influence of hot-working conditions on high-temperature properties of a heat-resistant alloy (U.S. Government Printing Office, 1957), by John F. Ewing, J. W. Freeman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
Space nuclear safety and fuels program : March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
Large radioisotope heat source capsule program : topical report no. 8 : capsule impact testing (Canoga Park, California : Atomics International, North American Rockwell, 1970., 1970), by J. M. Harris, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
Ultra-short-time creep rupture (Wright Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1962., 1962), by J. P. Knight, H. W. Leavenworth, W. A. Cosby, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and VA. American Machine & Foundary Company. Alexandria (page images at HathiTrust)
A study of the possibility of reinforcing high-temperature alloys by addition of refractory powders (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1958., 1958), by John D. Burney, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Inc P.R. Mallory & Co. (page images at HathiTrust)
The determination of trace amounts of Zirconium and Titanium in Tungsten (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Ken F. Sugawara, United States. Air Force. Systems Command. Aeronautical Systems Division, and Air Force Materials Laboratory (U.S.). Materials Physics Division (page images at HathiTrust)
Investigation of the effects of rapid loading and elevated temperatures on the mechanical properties of compressive and column members (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by P. R. Dioguardo, R. D. Lloyd, Aeronautical Systems Center (U.S.), United States. Air Force. Systems Command. Aeronautical Systems Division, and Marquardt Corporation (page images at HathiTrust)
Development and evaluation of high temperature protective coatings for Columbium alloys. Part 1. Coating development (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by R. A. Jeffreys, J. D. Gadd, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and inc Thompson Ramo Wooldridge (page images at HathiTrust)
Normal spectral reflectance of anodized coatings on Aluminum, Magnesium, Titanium and Beryllium (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by J. E. Janssen, R. N. Schmidt, James R. Luck, Ralph H. Torborg, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
Further investigation of notch sensitivity of refractory metals. (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1965., 1962), by Battelle Memorial Institute and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
Investigation of diffusion barriers for refractory metals (Wright-Patterson Air Force Base, Ohio : Directorate of Matyerials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by E. M. Passmore, B. S. Lement, J. E. Boyd, United States. Air Force. Systems Command. Aeronautical Systems Division, and United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States (page images at HathiTrust)
Impurity atom-dislocation interactions and subsequent effects on mechanical properties of refractory metals (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by M. A. Adams, H. Nesor, United States. Air Force. Systems Command. Aeronautical Systems Division, and Materials Research Corporation (page images at HathiTrust)
Research to determine the composition of dispersed phases in refractory metal alloys (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Frank B. Cuff and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
Notch sensitivity of refractory metals (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1960., 1960), by Albert G. Imgram, Robert I. Jaffee, Horace R. Ogden, Frank C. Holden, United States. Wright Air Development Division, United States. Air Force. Air Research and Development Command, and Battelle Memorial Institute (page images at HathiTrust)
Concentration gradients in refractory metal binary diffusion couples (Wright-Patterson Air Force Base, Ohio : AF Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, [1963], 1963), by Robert E. Ogilvie, Donald M. Koffman, and Sheldon H. Moll (page images at HathiTrust)
The evaluation of high temperature materials. Part I, Evaluation of coatings for refractory alloys. Part II, Materials evaluation with an arc-plasma-jet (Wright-Patterson Air Force Base, Ohio : Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1964., 1964), by John C. Wurst, Air Force Materials Laboratory (U.S.), and United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
A study of the possibility of reinforcing high-temperature alloys by addition of refractory powders (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by John D. Burney, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and P.R. Mallory & Co. Inc (page images at HathiTrust)
Development and evaluation of high temperature protective coatings for Columbium alloys. Part 2. Coating evaluation (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by R. A. Jeffreys, J. D. Gadd, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and inc Thompson Ramo Wooldridge (page images at HathiTrust)
Investigation of the relationship of twinning to brittle fracture of refractory metals (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by C. N. Reid, G. T. Hahn, A. Gilbert, United States. |b Air Force. |b Systems Command. |b Aeronautical Systems Division. |b Directorate of Materials and Processes, and Battelle Memorial Institute (page images at HathiTrust)
Extrusion of refractory metals and superalloys (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1966., 1966), by D. R. Carnahan, V. DePierre, D. S. Michlin, Air Force Materials Laboratory (U.S.), and Westinghouse Electric Corporation. Astronuclear Laboratory (page images at HathiTrust)
Investigation into the tungsten-rich regions of the binary systems tungsten-carbon, tungsten-boron and tungsten-beryllium. Part 1, Tungsten-carbon equilibrium system (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by H. J. Goldschmidt, J. A. Brand, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
Development of methods and instruments for mechanical evaluation of refractory materials at very high temperatures (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1961., 1961), by Delbert H. Fisher, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and Battelle Memorial Institute (page images at HathiTrust)
Development of optimum methods for the primary working of refractory metals. Part III (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by P. S. Duletsky, V. DePierre, and United States. Air Force. Systems Command. Aeronautical Systems Division (page images at HathiTrust)
Development of optimum methods for the primary working of refractory metals. Part I (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1961., 1961), by R. B. Simonson, R. C. Green, R. W. Tombaugh, J. W. Long, United States. Air Force. Air Research and Development Command, United States. Wright Air Development Division, and Inc Harvey Aluminum (page images at HathiTrust)
Grinding ratios for aerospace alloys (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, 1966., 1966), by Michael Field, John F. Kahles, Air Force Machinability Data Center, Air Force Materials Laboratory (U.S.), and United States. Air Force. Systems Command. Research and Technology Division (page images at HathiTrust)
Diffusion in refractory metals (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1961., 1961), by N. L. Peterson, United States. Wright Air Development Division, United States. Air Force. Air Research and Development Command, and Inc Nuclear Metals (page images at HathiTrust)
Effects of severe thermal and stress histories on material strength - rate process theory approach AISI 301 extra hard, PH 15-7 Mo RH, RENE' 41, 7075-T6 (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems DIvision, Air Force Systems Command, United States Air Force, 1962., 1962), by C. D. Brownfield, D. R. Apodaca, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States, and Northrop Corporation (page images at HathiTrust)
Determination of the effects of elevated temperature materials properties of several high temperature alloys (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division. Air Force Systems Command, United States. Air Force, 1962., 1962), by M. M. Lemcoe, Alex. Jr Trevino, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, United States. Air Force. Systems Command. Aeronautical Systems Division, and Southwest Research Institute (page images at HathiTrust)
Interim report on the thermodynamics of chemical species important in aerospace technology. ([Washington], 1971), by United States. National Bureau of Standards and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
Evaluation procedures for screening coated refractory metal sheet (National Academy of Sciences, 1963), by National Research Council (U.S.). Materials Advisory Board (page images at HathiTrust; US access only)
Studies of heat-resistant alloys (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1960), by University of Michigan. Research Institute and A. Phillip Coldren (page images at HathiTrust)

More items available under narrower terms.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.