The Online Books Page

Jet pumps

See also what's at your library, or elsewhere.

• Hydraulic machinery
• Pumping machinery

• Jet pumps -- Fluid dynamics
• Jet pumps -- Testing
• Ejector pumps
• Injectors
• Jet boat engines
• Short take-off and landing aircraft -- Jet propulsion -- Ejectors
• Vertically rising aircraft -- Jet propulsion -- Ejectors

• Momentum pumps

• Liquid rocket engine axial-flow turbopumps (National Aeronautics and Space Administration, 1978), by D. D. Scheer (page images at HathiTrust)
• Analysis and testing of high entrainment single nozzle jet pumps with variable mixing tubes (National Aeronautics and Space Administration ;, 1972), by Kenneth E. Hickman, Gerald B. Gilbert, Philip G. Hill, Langley Research Center, and Dynatech R/D Company (page images at HathiTrust)
• NASA TN D-4592 (National Aeronautics and Space Administration ;, 1968), by Nelson L. Sanger, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6453 (National Aeronautics and Space Administration :, 1971), by Nelson L. Sanger, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• An investigation of the hydraulic jet pump. (Berkeley, 1913), by Howard Hamilton Bliss (page images at HathiTrust)
• An investigation of the water pressure ejector (1908), by Mark Ross Haynes (page images at HathiTrust; US access only)
• Study and evaluation of remedial sand bypassing procedures (U.S. Waterways Experiment Station, 1976), by Rolland W. Harris and Scripps Institution of Oceanography (page images at HathiTrust)
• A manual on jet pumps : based on a survey of technical literature (University of Virginia, Engineering Experiment Station, 1955), by Omer Allan Gianniny and University of Virginia. Engineering Experiment Station (page images at HathiTrust; US access only)
• Jet pump application in estuary maintenance (Oregon State University, 1972), by Allen R. Boyce and Oregon State University. Civil Engineering Design Project (page images at HathiTrust; US access only)
• Hydraulic studies of a water jet-pump for the Keswick Dam fish-trap, Central Valley Project, California (U.S. Dept. of the Interior, Bureau of Reclamation, 1944), by Fred Locher and United States Bureau of Reclamation (page images at HathiTrust)
• A guide to the planning and hydraulic design of jet pump remedial sand bypassing systems (U.S. Army Engineer Waterways Experiment Station ;, 1981), by Thomas W. Richardson, Ernest C. McNair, and United States Army Corps of Engineers (page images at HathiTrust)

• Analytical and experimental investigation of high entrainment jet pumps (National Aeronautics and Space Administration, 1970), by Kenneth E. Hickman, John H. Carey, Gerald B. Gilbert, United States National Aeronautics and Space Administration, Ames Research Center, and Dynatech R/D Company (page images at HathiTrust)

• Noncavitating and cavitating performance of several low area ratio water jet pumps having throat lengths of 3.54 diameters (National Aeronautics and Space Administration ;, 1969), by Nelson L. Sanger, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Steam jet pump analysis and experiments (Washington, D.C. : Office of Technical Services, Department of Commerce, 1960., 1960), by Ronald P. Rose, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Controlled tests of eductors and submersible pumps (U.S. Army Engineer Waterways Experiment Station, 1994), by James E. Clausner, Dredging Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)

• The efficiency of pumps and ejectors (Van Nostrand, 1920), by Edward Cyril Bowden-Smith (page images at HathiTrust)
• Venturi air-jet vacuum ejectors for high-volume atmospheric sampling on aircraft platforms (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Gerald Franklin Hill and Langley Research Center (page images at HathiTrust)
• NASA TN D-5810 (National Aeronautics and Space Administration :, 1970), by Lawrence F. Hatakeyama, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6160 (National Aeronautics and Space Administration :, 1971), by Francis C. Chenoweth (page images at HathiTrust; US access only)
• Performance investigation of a nonpumping rocket-ejector system for altitude simulation (National Aeronautics and Space Administration, 1959), by Anthony Fortini and Lewis Research Center (page images at HathiTrust)
• Preliminary investigation of off-design performance of divergent-ejector-type rocket nozzles (National Aeronautics and Space Administration, 1960), by Laurence W. Gertsma, Richard A. Yeager, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effect of free-stream Mach number on gross-force and pumping characteristics of several ejectors (National Advisory Committee for Aeronautics, 1955), by Leonard E. Stitt, Alfred S. Valerino, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Investigation at supersonic and subsonic Mach numbers of auxiliary inlets supplying secondary air flow to ejector exhaust nozzles (National Advisory Committee for Aeronautics, 1956), by Donald P. Hearth, Robert W. Cubbison, Lewis Flight Propulsion Laboratory, United States. National Adviosry Committee for Aeronautics, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of the water pressure ejector (1908), by Mark Ross Haynes (page images at HathiTrust; US access only)
• Characteristics of five ejector configurations at free-stream mach numbers from 0 to 2.0 (National Aeronautics and Space Administration, 1959), by John L. Klann, Ronald G. Huff, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Transonic off-design performance of a fixed divergent ejector designed for a mach number of 2.0 (National Aeronautics and Space Administration, 1959), by Harry T. Norton, Charles E. Mercer, Marlowe D. Cassetti, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Eductors in hydraulic systems. ([University Park, Pa.], 1955), by Albrecht W. Hussmann (page images at HathiTrust; US access only)
• The Alperin jet-diffuser ejector (AJDE) development, testing, and performance verification report (China Lake, California : Naval Weapons Center, Systems Development Department, 1976., 1976), by Morton Alperin, Charles A. Smith, Kiunn Jenq Wu, United States. Naval Air Systems Command, and Naval Weapons Center (page images at HathiTrust)
• Steady flow ejector research program; final report for extended contract Nonr-3067(00) [by] J.K. Johnson, Jr., P.K. Shumpert [and] J.F. Sutton. ([Marietta, Ga.?], 1961), by Lockheed-Georgia Company, J. F. Sutton, P. K. Shumpert, and J. K. Johnson (page images at HathiTrust; US access only)

• Practical treatise on injectors as feeders of steam boilers ... (The Author, 1890), by George N. Nissenson (page images at HathiTrust)
• Steam injectors: their theory and use. (D. Van Nostrand company, 1877), by Léon Annet Pierre Pochet (page images at HathiTrust)
• Practice and theory of the injector. (Wiley, 1894), by Strickland Landis Kneass (page images at HathiTrust)
• Practice and theory of the injector. (Wiley, 1910), by Strickland Landis Kneass (page images at HathiTrust)
• Injectors : their theory, construction & working (Technical Pub. Co., 1906), by W. W. F. Pullen (page images at HathiTrust)
• Practice and theory of the injector (Wiley, 1898), by Strickland Landis Kneass (page images at HathiTrust)
• Steam-injection pressing of isocyanate-bonded aspen flakeboards : latitudes and limitations (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985), by Robert L. Geimer and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Liquid rocket engine injectors. (National Aeronautics and Space Administration ;, 1976), by W. H. Nurick and G. S. Gill (page images at HathiTrust)
• Locomotive injectors and boiler attachments; injector department. (William Sellers & Co., 1928), by William & Co Sellers (page images at HathiTrust)
• In the matter of certain apparatus for flow injection analysis and components thereof : investigation no. 337-TA-151. (U.S. International Trade Commission, 1984), by United States International Trade Commission (page images at HathiTrust)
• Combustion of hydrogen in a two-dimensional duct with step fuel injectors (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by James M. Eggers, Paul B. Gooderum, Patricia G. Reagon, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Interaction between step fuel injectors on opposite walls in a supersonic combustor model (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Charles R. McClinton, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Reverse-flow combustor for small gas turbines with pressure-atomizing fuel injectors (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Carl T. Norgren, Stephen M. Riddlebaugh, Edward J. Mularz, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Effect of steam addition on cycle performance of simple and recuperated gas turbines (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1979), by Robert J. Boyle, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Blowoff of propane and hydrogen diffusion flames at high Mach number, ramjet conditions (National Aeronautics and Space Administration, 1959), by Robert J. Bacigalupi, Erwin A. Lezberg, and Lewis Research Center (page images at HathiTrust)
• NASA TN D-5324 (National Aeronautics and Space Administration ;, 1969), by Jerry M. Winter, Albert J. Pavli, Donald A. Peterson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Investigation of injectors for a low-chamber-pressure hydrogen-fluorine rocket engine (National Aeronautics and Space Administration, 1962), by Harold G. Price, Arthur M. Shinn, Robert J. Lubick, and Lewis Research Center (page images at HathiTrust)
• A high-performance 250-pound-thrust rocket engine utilizing coaxial-flow injection of JP-4 fuel and liquid oxygen (National Aeronautics and Space Administration, 1959), by Samuel Stein and Langley Research Center (page images at HathiTrust)
• Injectors: their theory, construction and working (Technical Pub. Co., 1893), by W. W. F. Pullen (page images at HathiTrust)
• Notice théorique et pratique sur l'injecteur automoteur : breveté, propre a l'alimentation des chaudières a vapeur et a l'élévation de l'eau (H. Flaud ; Mallet-Bachelier, 1861), by Henri Giffard (page images at HathiTrust)
• Tests of a locomotive injector (1903), by George Hamm Dickerson (page images at HathiTrust; US access only)
• The Improved injector the best boiler feeder known : simple in operation and absolutely certain of working under proper circumstances .. (s.n., 1800), by T. McAvity & Sons (page images at HathiTrust)
• The Best injector for stationary, portable, locomotive & marine boilers manufactured by Robt. Mitchell & Co., Montreal Brass Works, St. Peter & Craig streets, Montreal. (s.n., 1800), by Robt. Mitchell & Co (page images at HathiTrust)
• Steam injectors : their theory and their use (D. Van Nostrand company, 1890), by Léon Annet Pierre Pochet (page images at HathiTrust)
• Effect of high air velocities on the distribution and penetration of a fuel spray (National Advisory Committee for Aeronautics ;, 1931), by A. M. Rothrock and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Injector tests (1904), by Malbert W. Taber and Jesse Philip Knickerbocker (page images at HathiTrust; US access only)
• Hand injector for liquid soil insecticides (U.S. Dept. of Agriculture, Agricultural Research Administration, Bureau of Entomology and Plant Quarantine, 1954), by W. C. Fest and United States. Bureau of Entomology and Plant Quarantine (page images at HathiTrust)
• Investigation of ramp injectors for supersonic mixing enhancement (National Aeronautics and Space Administration, Langley Research Center, 1994), by Y. Haimovitch, A. S. Roberts, E. Gartenberg, and Langley Research Center (page images at HathiTrust)

More items available under narrower terms.