Laboratory testsSee also what's at your library, or elsewhere.
|
Filed under: Laboratory tests Impact characteristics of glass fiber-reinforced composite materials for use in roadside safety barriers. Final report. (1994), by Alrik L. Svenson (page images at HathiTrust) Development of vehicle rollover maneuver. Volume II. Executive summary report. (1978), by R. S. Rice, David J. Segal, and Ian Shore Jones (page images at HathiTrust) Motorists' requirements for active grade crossing warning devices. Final report. (1977), by R. J. Ruden, C. F. Wasser, Slade Hulbert, and Albert Burg (page images at HathiTrust) Design prediction of pavement skid resistance from laboratory tests. Final report. (1980), by W. H. Parcells, T. M. Metheny, and R. G. Maag (page images at HathiTrust) Performance of two ice-retardant overlays. Final report. (1986), by J. H. Tanski (page images at HathiTrust) Changeable message sign visibility. Final report. (1996), by Philip M. Garvey and Douglas J. Mace (page images at HathiTrust) Testing of state roadside safety systems. Volume III: appendix B: crash testing and evaluation of a guardrail system for low-fill culvert. (1996), by K. K. Mak, Roger P. Bligh, and Wanda L. Menges (page images at HathiTrust) Sand ripple growth in an oscillatory-flow water tunnel /, by Karl E. B. Lofquist and Coastal Engineering Research Center (U.S.) (page images at HathiTrust) Alcohol experiments on driving-related behaviour: a review of the 1972-1973 literature - alcohol countermeasures literature review. Final report. (1974), by M. W. Perrine (page images at HathiTrust) Field evaluation of miles-per-gallon meters. Final report. (1977), by Roger A. Banowetz and L. J. Bintz (page images at HathiTrust) The effects of alcohol on the driver's decision-making behavior. Volume I: executive summary and technical report. Final report. (1978), by R. Wade Allen, Shalom H. Schwartz, J. R. Hogge, and A. C. Stein (page images at HathiTrust) The effects of alcohol on the driver's decision-making behavior. Volume II: appendices. Final report. (1978), by R. Wade Allen, Shalom H. Schwartz, J. R. Hogge, and A. C. Stein (page images at HathiTrust) Development of vehicle rollover maneuver. Volume I. Final report. (1978), by R. S. Rice, David J. Segal, and Ian Shore Jones (page images at HathiTrust) An overview of roadway delineation research. Phase III. Final report. (1978), by Donald G. Capelle (page images at HathiTrust) Determination of the tire quality from non destructive inspection. Final report. (1979), by S. N. Bobo (page images at HathiTrust) Correlation between ultrasonic nondestructive inspection and wheel test of 34 retreaded tires. Interim report. (1979), by S. N. Bobo (page images at HathiTrust) Skid resistance of pavement marking materials. Volume I. Final report. (1981), by John J. Henry, D. A. Anderson, and G. F. Hayhoe (page images at HathiTrust) Improved conspicuity to the sides and rear of motorcycles and mopeds. Final report. (1982), by M. Freedman and P. S. Davit (page images at HathiTrust) Assessment of truck splash and spray suppression devices. Final report. (1983), by Walter A. Johnson and S. Shapiro (page images at HathiTrust) Marine coatings performance for different ship areas. Volume I. (1979) (page images at HathiTrust; US access only) Drunk Driving Warning System (DDWS). Volume I: system concept and description. Final report. (1983), by R. Wade Allen, A. C. Stein, Leland G. Summers, and M. L. Cook (page images at HathiTrust) Optical engineering research on new and used automotive glazing. Final report. (1983), by H. Wakeley, L. Wolf, and S. Godin (page images at HathiTrust) Laboratory testing of two prototype in-vehicle breath test devices. Technical report. (1985), by James F. Frank (page images at HathiTrust) Retroreflective requirements for traffic signs - a STOP case study. Final report. (1987), by J. M. Morales (page images at HathiTrust) Response of asphalt concrete pavements to dynamic truck loads. Final report. (1987), by J. B. Sousa, J. Lysmer, and Carl L. Monismith (page images at HathiTrust) Further laboratory testing of in-vehicle alcohol test devices. Technical report. (1988), by James F. Frank (page images at HathiTrust) Truck escape ramp design methodology. Volume 1. Executive summary. (1988), by James C. Wambold (page images at HathiTrust) Truck escape ramp design methodology. Volume 2. Final report. (1988), by James C. Wambold, L. A. Rivera-Ortiz, and M. C. Wang (page images at HathiTrust) Laboratory evaluation of two passive alcohol sensor devices. Technical report. (1988), by A. J. Farina (page images at HathiTrust) Skid resistance study - final report. Aggregates and skid resistance. (1990), by Kathleen T. Diringer (page images at HathiTrust) Ergonomic research on school bus cross view mirror systems. Final report. (1990), by W. R. Garrott, Thomas Hugh Rockwell, and Steven M. Kiger (page images at HathiTrust) Effect of truck tire contact pressure. Final report. (1991), by R. P. Elliott, R. P. Selvam, and L. K. Mun (page images at HathiTrust) Ramp signing for trucks. Final report. (1993), by Richard L. Knoblauch and Marsha Nitzburg (page images at HathiTrust) A preliminary laboratory investigation of passive railroad crossing signs. Final report. (1993), by Nancy Bridwell, Elizabeth Alicandri, D. Fischer, and E. Kloeppel (page images at HathiTrust) Daytime running lights and turn signal masking. Final report. (1994), by John Palmer and Barry H. Kantowitz (page images at HathiTrust) Driver perception of just-noticeable differences of automotive signal lamp intensities. Final report. (1994), by Richard W. Huey, Debra K. Dekker, and L. Ronald (page images at HathiTrust) Intersection design decision/reaction time for older drivers. Final report. (1995), by J. R. Graham, L. Ellis King, D. Naylor, and S. Blakley (page images at HathiTrust) Drivers' activities and information needs in an automated highway systems. (1996), by Lee Levitan and John R. Bloomfield (page images at HathiTrust) Effects of sleep schedules on commercial motor vehicle driver performance. (2000), by T. Balkin, D. Thome, H. Sing, M. Thomas, D. Redmond, N. Wesensten, J. Williams, S. Hall, and Gregory Belenky (page images at HathiTrust) Testing of state roadside safety systems. Volume I: technical report. (1996), by K. K. Mak, Roger P. Bligh, and Wanda L. Menges (page images at HathiTrust) Testing of state roadside safety systems. Volume II: appendix A: crash testing and evaluation of a Michigan thrie-beam transition design. (1996), by K. K. Mak, Roger P. Bligh, and Wanda L. Menges (page images at HathiTrust) Testing of state roadside safety systems. Volume IV: appendix C: crash test and evaluation of a Pennsylvania transition design. (1996), by K. K. Mak, Roger P. Bligh, and Wanda L. Menges (page images at HathiTrust) Testing of state roadside safety systems. Volume XI: appendix J: crash testing and evaluation of existing guardrail systems. (1998), by K. K. Mak, Roger P. Bligh, and Wanda L. Menges (page images at HathiTrust) Summary and recommendations of recycled materials in roadside safety devices. (2001), by Roger P. Bligh, Dean Alberson, and Barbara G. Butler (page images at HathiTrust) Laboratory testing of recycled materials in roadside safety devices. (2001), by Roger P. Bligh, Dean Alberson, A. O. Atahan, and A. R. Bowen (page images at HathiTrust) U.S. Department of Transportation National Highway Traffic Safety Administration : laboratory test procedure for FMVSS 103 : windshield defrosting and defogging systems. (Washington, DC : U.S. Dept. of Transportation, Office of Vehicle Safety Compliance, [1996]), by United States. National Highway Traffic Safety Administration. Office of Vehicle Safety Compliance (page images at HathiTrust) Evaluation of glare from the center-high-mounted stop light. Final report. (1990), by M. S. Sanders, B. Shaw, B. L. Nicholson, and J. Merritt (page images at HathiTrust)
Items below (if any) are from related and broader terms. |