The Online Books Page

Metals -- Oxygen content

See also what's at your library, or elsewhere.

• Metals
• Gases in metals
• Oxygen
• Oxygen content

• Liquid metals -- Oxygen content
• Metals -- Deoxidizing

• The determination of the oxygen content of metals by the carbon monoxide method (Atomic Energy Commission, 1944), by D. Lipkin, M. L. Perlman, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Gases in metals. [Part] II., The determination of oxygen and hydrogen in metals by fusion in vacuum (U.S. Dept. of Commerce, Bureau of Standards :, 1925), by Louis Jordan, James R. Eckman, and United States. National Bureau of Standards (page images at HathiTrust)
• NASA TN D-5875 (National Aeronautics and Space Administration :, 1970), by Stephan Stecura, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Development of an instrument and technique utilizing carbon-14 for measuring very low concentrations of oxygen in high purity metals : final report (Cambridge, Massachusetts : Alloyd Corporation ; Washington, D.C. : Available from the Office of Technical Services, Dept. of Commerce, 1961., 1961), by Roger A. Covert, U.S. Atomic Energy Commission. New York Operations Office, Alloyd Corporation, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)

• Evaluation of the results of a round robin analysis for oxygen in potassium and sodium (National Aeronautics and Space Administration ;, 1968), by Glenn R. Zellars, Charles A. Barrett, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)

• Low-rank coals and waste materials for reduction roasting and metallization of iron oxides (U.S. Dept. of the Interior, Bureau of Mines, 1983), by R. E. Peterson and W. M. Mahan (page images at HathiTrust)
• Deoxidation of steel using waste aluminizing dross : a feasibility study (U.S. Dept. of the Interior, Bureau of Mines ;, 1972), by H. V. Makar, P. J. Gallagher, United States Bureau of Mines, United States. Bureau of Mines. Solid Waste and Recycling Program, and College Park Metallurgy Research Center (page images at HathiTrust)
• Determination of melting points of deoxidation slags (1920), by Sidney Leroy Peterson (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• Selected Values of Thermodynamic Properties of Metals and Alloys (New York: J. Wiley and Sons, c1963), by Ralph Hultgren, Raymond L. Orr, Philip D. Anderson, and K. K. Kelley (page images at HathiTrust)
• Engineering Materials and Processes (third edition; Scranton: International Textbook Co., 1959), by Donald S. Clark, contrib. by William Howard Clapp (page images at HathiTrust)
• Metals and Their Chief Industrial Applications: Being, with Some Considerable Applications, the Substance of a Course of Lectures Delivered at the Royal Institute of Great Britain in 1877 (London: Macmillan and Co., 1878), by C. R. Alder Wright (page images at HathiTrust)
• Americium : its behavior in soil and plant systems (U.S. Environmental Protection Agency, Office of Research and Development, Environmental Monitoring and Support Laboratory, Monitoring Systems Research and Development Division ;, 1976), by K. W. Brown, Nev.) Environmental Monitoring and Support Laboratory (Las Vegas, and United States. Environmental Protection Agency. Office of Research and Development (page images at HathiTrust)
• Diatribe physica de virunculis metallicis, quam D. O. M. A. in illustrisalana praeside ... (Literis Krebsianis, 1662), by Caspar Posner and Michael Dachselt (page images at HathiTrust)
• Liquid-metals handbook. (U.S. Govt. Print. Off.], 1950), by U.S. Atomic Energy Commission and United States. Office of Naval Research. Committee on the Basic Properties of Liquid Metals (page images at HathiTrust)
• Metals and metallic compounds (E. Arnold, 1923), by Ulick Richardson Evans (page images at HathiTrust; US access only)
• Analysis detection and commercial value of the rare metals. (The Mining reporter publishing company, 1907), by Julius Ohly (page images at HathiTrust)
• Geschichte der Metalle : vom Verein zur beförderung des gewerbfleisses mit edm ersten Tornow-preise gekrönte preisschrift (L. LImion, 1901), by Adelbert Rössing (page images at HathiTrust; US access only)
• The total and free energies of formation of the oxides of thirty-two metals (The Electrochemical society, inc., 1942), by Maurice de Kay Thompson and Electrochemical Society (page images at HathiTrust)
• The properties of electrically conducting systems, including electrolytes and metals (The Chemical catalog company, inc., 1922), by Charles A. Kraus (page images at HathiTrust)
• Metals; their properties and treatment (Longmans, Green, and co., 1888), by Charles Loudon Bloxam and Alfred Kirby Huntington (page images at HathiTrust)
• Aircraft metals. (U.S. Govt. Print. Off., 1945), by United States Bureau of Naval Personnel and United States. Naval Air Technical Training Command (page images at HathiTrust)
• Canada's metals (Macmillan and company, limited, 1898), by W. C. Roberts-Austen (page images at HathiTrust)
• Metals, their properties and treatment (D. Appleton and Co., 1872), by Charles L. Bloxam (page images at HathiTrust)
• Metallography, an introduction to the study of the structure of metals (Macmillan and co., limited;, 1902), by Arthur Horseman Hiorns (page images at HathiTrust; US access only)
• Scrap metals (The Penton publishing co., 1918), by George Henry Manlove and Charles Vickers (page images at HathiTrust)
• Modern welding practice (Goodheart--Willcox Co., 1951), by Andrew D. Althouse (page images at HathiTrust)
• Patternmaking and founding (McKnight & McKnight Pub. Co., 1954), by Robert Ernest Smith (page images at HathiTrust)
• Intermetallic compounds (Longmans, Green and co., 1914), by Cecil H. Desch (page images at HathiTrust; US access only)
• Analytical methods for certain metals including cerium, thorium, molybdenum, tungsten, radium, uranium, vanadium, titanium and zirconium (Govt. print. off., 1923), by Richard Bishop Moore, Samuel Colville Lind, J. E. Conley, Charles Wesley Davis, John Paul Bonardi, and John Wesley Marden (page images at HathiTrust)
• The physical chemistry of the metals (J. Wiley & sons, inc.; [etc., etc.], 1919), by Friedrich Rudolf Schenck and Reginald S. Dean (page images at HathiTrust)
• Rarer metals (Chemical Pub., 1946), by Jack De Ment, Reginald Brodrick Gordon, and Henry Carl Drake (page images at HathiTrust)
• The physics of metals (McGraw-Hill, 1943), by Frederick Seitz (page images at HathiTrust)
• A text book of metallography; chemistry and physics of the metals and their alloys (The Chemical catalog Co., 1925), by Gustav Tammann, Leslie Gerald Swenson, and Reginald S. Dean (page images at HathiTrust)
• Adhesive bonding of metals. (Book Division, Reinhold, 1954), by George Epstein (page images at HathiTrust)
• The protection of metals from oxidation at high temperatures (Printed for Calorizing corporation of America, 1918), by William Ernst Ruder and Calorizing corporation of America (page images at HathiTrust)
• Die Metalle bei den Naturvölkern, mit Berücksichtigung prähistorischer Verhältnisse (Verlag von Veit & comp., 1884), by Richard Andree (page images at HathiTrust)
• The action of salicylic acid upon the metallic acids ... (J. C. Winston co., 1910), by John Hughes Müller (page images at HathiTrust)
• The synthetic use of metals in organic chemistry. (J. & A. Churchill, 1914), by Arthur James Hale (page images at HathiTrust; US access only)
• A dual theory of conduction in metals. (The Murray printing company, 1938), by Edwin Herbert Hall (page images at HathiTrust)
• Total radiation from metals ... (Press of the New era printing company, 1915), by Vernon Andrew Suydam (page images at HathiTrust)
• Engineering non-ferrons metals and alloys (H. Frowde and Hodder & Stoughton, 1923), by Leslie Aitchison and William Robb Barclay (page images at HathiTrust; US access only)
• Mechanical properties of metals and alloys (Washington, U.S. Govt. Print. Off., 1943., 1943), by John L. Everhart, Frieda B. Siegel, Pearl Goldman Weissler, James Kanegis, William Earl Lindlief, and United States. Bureau of Standards (page images at HathiTrust)
• Review of oxidation and scaling of heated solid metals ... (H. M. Stationery off., 1935), by Great Britain. Department of Scientific and Industrial Research (page images at HathiTrust)
• The science of metals (McGraw-Hill, 1924), by Zay Jeffries and R. S. Archer (page images at HathiTrust)
• A brief history of the science of metals. (American Institute of Mining and Metallurgical Engineers, 1948), by R. F. Mehl and American Institute of Mining and Metallurgical Engineers (page images at HathiTrust)
• Acid-resisting metals (E. Benn ltd., 1925), by Sydney J. Tungay (page images at HathiTrust; US access only)
• Materials engineering of metal products. (Reinhold, 1949), by Norman Emme Woldman (page images at HathiTrust)
• Evaluation of residual stress. (McGraw-Hill Book Co., 1948), by Kalman Heindhofer (page images at HathiTrust)
• Plasticity and creep of metals (Wiley, 1961), by Jack Douglas Lubahn and Robert P. Felgar (page images at HathiTrust)
• Symposium on high-strength constructional metals, Pittsburgh regional meeting, American society for testing materials, March 4, 1936. (American society for testing materials, 1936), by American Society for Testing Materials (page images at HathiTrust)
• Die Metalle; Geschichte, Vorkommen und Gewinnung, nebst ausführlicher Produktions- und Preis-Statistik. Vom "Verein zur Beförderung des Gewerbefleisses" preisgekrönte Arbeit (W. Knapp, 1904), by Bernhard Neumann (page images at HathiTrust; US access only)
• El arte de los metales (metallurgy) (John Wiley & sons, inc.; [etc., etc.], 1923), by Alvaro Alonso Barba, Edward Payson Mathewson, and Ross E. Douglass (page images at HathiTrust)
• Minerals and metals: their natural history, and uses in the arts; with incidental accounts of mines and mining. (J.W. Parker and son, 1852), by Society for Promoting Christian Knowledge (Great Britain). General Literature Committee (page images at HathiTrust)
• Metals and their chief industrial applications. Being, with some considerable additions, the substance of a course of lectures delivered at the Royal institution of Great Britain in 1877. (Macmillan and co., 1878), by C. R. Alder Wright and Royal Institution of Great Britain (page images at HathiTrust)
• The playbook of metals: including personal narratives of visits to coal, lead, copper, and tin mines; with a large number of interesting experiments relating to alchemy and the chemistry of fifty metallic elements. (G. Routledge and sons, 1869), by John Henry Pepper (page images at HathiTrust)
• A treatise on metalliferous minerals and mining (C. Lockwood and co., 1881), by D. C. Davies (page images at HathiTrust)
• Theoretical metallurgy (J. Wiley & sons, inc.; [etc., etc.], 1924), by Reginald S. Dean (page images at HathiTrust)
• Iodide metals and metal iodides. (Wiley, 1961), by R. Fred Rolsten (page images at HathiTrust)
• Introduction to plasticity. (Ronald Press Co., 1956), by A. Phillips (page images at HathiTrust)
• Architectural metal handbook. ([Washington], 1947), by National Association of Architectural Metal Manufacturers, Harold S. Langland, and Earl P. Baker (page images at HathiTrust)
• Materials of machines (J. Wiley & sons, 1914), by Albert W. Smith (page images at HathiTrust)
• Electrical and magnetic properties of metals (American Society for Metals, 1963), by James K. Stanley (page images at HathiTrust)
• The electrolytic corrosion of some metals. ([Ithaca, N. Y., 1911), by Gorrell Robert White (page images at HathiTrust)
• Fabrication of control rods for nuclear reactors. (Rowman and Littlefield, 1963), by William E Ray (page images at HathiTrust)
• Rn̲tgenographie der Metalle und ihrer Legierungen (F. Enke, 1929), by M. C. Neuburger (page images at HathiTrust; US access only)
• Italy's foreign trade in iron, steel and nonferrous metals in 1923 (Govt. Print. Off., 1924), by Algernon Ashburner Osborne and United States Bureau of Foreign and Domestic Commerce (page images at HathiTrust)
• Manufactures of the non-ferrous metals in Canada. (F. A. Acland, Printer, 1924), by Canada Dominion Bureau of Statistics (page images at HathiTrust)
• Organic reagents for metals and other reagent monographs. (Chemical Pub. Co., 1955), by Hopkin & Williams and W. C. Johnson (page images at HathiTrust)
• Minerals of California (California State Printing Office, 1914), by Arthur S. Eakle (page images at HathiTrust)
• The mineralogy of the rarer metals. A handbook for prospectors. (C. Griffin & company, limited, 1912), by Edward Cahen and William Ord Wootton (page images at HathiTrust; US access only)
• The mineralogy of the rarer metals. A handbook for prospectors. (C. Griffin & company, limited, 1920), by Edward Cahen and William Ord Wootton (page images at HathiTrust; US access only)
• A practical treatise on the metals used in marine engineering. (J. Munro & co., limited, 1922), by W. H. Colpitts (page images at HathiTrust; US access only)
• The metals used in construction: iron,-steel,-Bessemer metal, etc., etc. (W.P. Nimmo, 1868), by Francis Herbert Joynson (page images at HathiTrust)
• Mechanical engineering materials: their properties and treatment in construction. (The technical publishing company limited; [etc., etc.], 1893), by Edward C. R. Marks (page images at HathiTrust)
• Impurities in metals : their influence on structure and properties. (J. Wiley, 1928), by Colin J. Smithells (page images at HathiTrust)
• Engineering materials and processes; text supplement and laboratory manual. ([Lithoprinted by Edwards Brothers] Distributed by Ulrich's Bookstore, 1951), by Frank Sowa and W. C. Truckenmiller (page images at HathiTrust)
• Pioneering in science : with which is presented the symposium entitled "The effect of temperature upon the properties of metals." June, 1925. (Crane Co., 1925), by Crane (Firm), American Society for Testing Materials, and American Society of Mechanical Engineers (page images at HathiTrust)
• Water quality standards criteria digest : a compilation of Federal/State criteria on mercury and heavy metals. (Environmental Protection Agency, 1972), by United States Environmental Protection Agency (page images at HathiTrust)
• Ship metallic material comparison and use guide. ([U.S. Govt. Print. Off.], 1971), by United States. Naval Ship Systems Command (page images at HathiTrust; US access only)
• Bioaccumulation of heavy metals by littoral and pelagic marine organisms (Environmental Protection Agency, Office of Research and Development, Environmental Research Laboratory ;, 1979), by John Holland Martin, R.I.) Environmental Research Laboratory (Narragansett, and Moss Landing Marine Laboratories (page images at HathiTrust)
• Air quality data for non-criteria pollutants, 1971 through 1975 (Environmental Protection Agency, Office of Research and Development, Environmental Monitoring and Support Laboratory, Statistical and Technical Analysis Branch ;, 1978), by United States. Environmental Protection Agency. Monitoring and Data Analysis Division (page images at HathiTrust)
• Metallurgical materials and processes. (Prentice-Hall, 1948), by John Elberfeld (page images at HathiTrust)
• Analysis, detection and commercial value of the rare metals. A treatise on the occurrence and distribution of the rare metals and earths, the methods of determination and their commercial value in the arts and industries with a historical and statistical review of each (Industrial Printing & Pub. Co., 1903), by Julius Ohly (page images at HathiTrust)
• Record book of business statistics. A background of facts from earlier years for comparison with data published monthly in the Survey of Current Business. (U.S. Govt. Print. Off., 1927), by United States Bureau of the Census, Lewis Seth Schnitman, and Mortimer Bliss Lane (page images at HathiTrust)
• Scrap metals, study of iron and steel old material, its preparation and markets (The Penton publishing co., 1925), by George Henry Manlove and Charles Vickers (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume I - summary report. Final report. (1977), by V. A. Grasso (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume II - final report. (1977), by V. A. Grasso (page images at HathiTrust)
• Automobile scrappage and recycling industry study - overview report. Final report. (1977), by Robert Kaiser, R. P. Wasson, and A. C. W. Daniels (page images at HathiTrust)
• Conference on basic research directions for advanced automotive technology. Proceedings. February 13-14, 1979, Volume I. (1979), by 13-14 Feb 1979 Basic Research Directions for Advanced Automotive Technology (page images at HathiTrust)
• Conference on basic research directions for advanced automotive technology. Proceedings. February 13-14, 1979, Volume II. (1979), by 13-14 Feb 1979 Basic Research Directions for Advanced Automotive Technology (page images at HathiTrust)
• Material applications in future automotive structure. Volume I: summary report. Final report. (1979), by Herbert A. Jahnle (page images at HathiTrust)
• Policy conflict--energy, environmental, and materials: automotive fuel-economy standards' implications for materials. Report to the Congress. (1980) (page images at HathiTrust)
• Weight reduction potential of automobiles and light trucks, 1979 summary source document. Final report. (1980), by Hsi-sheng Hsia and James A. Kidd (page images at HathiTrust)
• Technology assessment of automotive applications of metal-plastic laminates. Volume I. Final report. (1980), by Robert Kaiser (page images at HathiTrust)
• Technology assessment of automotive applications of metal-plastic laminates. Volume II. Final report. (1980), by Robert Kaiser (page images at HathiTrust)
• Automotive manufacturing processes. Volume IV - metal stamping and plastic forming process. Final report. (1981) (page images at HathiTrust)
• Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
• Development of a metal tube crash cushion for narrow hazard highway sites. Final report. (1986), by John F. Carney (page images at HathiTrust)
• Copper-nickel sheathing cost study : Phase III (U.S. Department of Transportation, Maritime Administration, 1987), by Eugene W. Thiele, R. S. Powell, and United States. Maritime Administration. Office of Advanced Ship Operations (page images at HathiTrust; US access only)
• Corrosion protection by calcite-type coatings. (1989) (page images at HathiTrust; US access only)
• Thermal conductivity of metals at high temperatures (Madison, Wis. ;, 1911), by Martin Fuller Angell (page images at HathiTrust)
• An introduction to the study of physical metallurgy (Constable & Co., 1914), by Walter Rosenhain (page images at HathiTrust; US access only)
• Alloys and their industrial applications (Charles Griffin and Co., 1914), by Edward F. Law (page images at HathiTrust; US access only)
• Metals and their alloys; a modern practical work dealing with metals from their origin to their useful application - both individually and as part of alloys - used where strength, ductility, toughness, lightness, color, hardness, cheapness, conductivity, or bearing properties are demanded. (H.C.Baird, 1923), by Charles Vickers (page images at HathiTrust)
• Distribution des déformations dans les métaux soumis à des efforts (Berger-Levrault & cie, libraires-éditeurs, 1896), by Louis Hartmann (page images at HathiTrust)
• Physical constants of pure metals. (H.M. Stationery off., 1936), by National Physical Laboratory (Great Britain) (page images at HathiTrust)
• Spectrochemical analysis of high-purity metals: a review and bibliography of recent literature (Bureau of Mines, 1961), by Maurice Jarvis Peterson (page images at HathiTrust)
• Modern welding practice (Goodheart-Willcox, 1958), by Andrew Daniel Althouse and Carl Harold Turnquist (page images at HathiTrust)
• Recovery of phosphates and metals from waste phosphate sludge by reduction-sinter processes (U.S. Dept. of Interior, Bureau of Mines, 1971), by R. F. Waters, A. A. Cochran, H. E. Powell, and United States Bureau of Mines (page images at HathiTrust)
• Incinerated municipal sewage sludge as a potential secondary resource for metals and phosphorus ([Washington, D.C.] : Dept. of the Interior, Bureau of Mines, 1979), by Robert C. Gabler (page images at HathiTrust)
• Architectural metal handbook (Washington], 1952), by National Association of Architectural Metal Manufacturers, Harold S. Langford, and Earl P. 1882- Baker (page images at HathiTrust)
• Damping capacity : its measurement and significance (U.S. Dept. of the Interior, Bureau of Mines, 1959), by J. W. Jensen (page images at HathiTrust)
• Recovery of phosphates and metals from phosphate sludge by solvent extraction (U.S. Dept. of Interior, Bureau of Mines, 1972), by H. E. Powell, A. A. Cochran, L. L. Smith, and United States Bureau of Mines (page images at HathiTrust)
• Removal of leachable metals and recovery of alumina from utility coal ash (U.S. Dept. of the Interior, Bureau of Mines, 1983), by Robert C. Gabler and Robert L. Stoll (page images at HathiTrust)
• Mineralogische schriften, übersetzt und mit erläuternden anmerkungen begleitet von Ernst Lehmann ... v.3:2-4. (Craz und Gerlach, 1800), by Georg Agricola and Ernst Johann Traugott Lehmann (page images at HathiTrust)
• The mechanism of the precipitation of metals by hydrogen sulfide. A study of certain suflur complexes of mercury (Eschenbach Printing Co., 1924), by Waldo Lounsbury Semon (page images at HathiTrust)
• Arte de los metales. Seguido de notas y suplementos al libro por un antiguo minero; juicios y comentarios. (Editorial "Potosí"], 1967), by Alvaro Alonso Barba (page images at HathiTrust; US access only)
• Metallhysik, vn prof. dr.-ing M. von Schwartz. Mit 154 abbildungen. (J. A. Barth, 1925), by Maximilian Schwarz (page images at HathiTrust; US access only)
• The fatigue of metals under repeated strains. With various tables of results of experiments. (D. Van Nostrand, 1876), by Ludwig Spangenburg (page images at HathiTrust)
• Les gisements métallifères de Linares et Huelva (Sucesores de Rivadeneyra (s.a.), 1926), by Juan Hereza, Alfonso de Alvarado, and Spain) International Geological Congress (14th : 1926 : Madrid (page images at HathiTrust; US access only)
• The synthetic use of metals in organic chemistry. (P. Blakiston's son & co., 1914), by Arthur J. Hale (page images at HathiTrust; US access only)
• Métaux : chimie organique (Hachette, 1917), by A. Joly and R. Lespieau (page images at HathiTrust; US access only)
• The effect of current on the photo-electric sensitivity of metals ... (University of Toronto press, 1923), by Allen Goodrich Shenstone (page images at HathiTrust; US access only)
• Chemical combinations among metals (P. Blakiston's son & co., 1918), by Michele Giua, Gilbert Wooding Robinson, and Clara Giua-Lollini (page images at HathiTrust)
• Report of the United States Board appointed to test iron, steel and other metals. In two volumes. (Gov't print. off., 1881), by steel and other metals United States. Board for testing iron (page images at HathiTrust)
• Lehrbuch der Metallkunde des Eisens und der Nichteisenmetalle (J. Springer, 1929), by Franz Sauerwald (page images at HathiTrust; US access only)
• Einige Prinzipien der theoretischen mechanischen Technologie der Metalle (Der Verfasser, 1927), by Sándor Rejtö (page images at HathiTrust; US access only)
• Die Verfestigung der Metalle durch mechanische Beanspruchung : die bestehenden Hypothesen und ihre Diskussion (J. Springer, 1920), by H. W. Fraenkel (page images at HathiTrust; US access only)
• Chemical combination among metals (Churchill, 1918), by Michele Giua and Clara Lollini Gina (page images at HathiTrust; US access only)
• Les métaux spéciaux, manganèse--chrome--silicum--tungstène--molybdène--vanadium, et leurs composés métallurgiques industriels (H. Dunod et E. Pinat, 1909), by Jean Georges Escard (page images at HathiTrust; US access only)
• Supplement to circular of the National Bureau of Standards C101 (ed. 2) (U.S. G.P.O., 1937), by United States. National Bureau of Standards (page images at HathiTrust)
• Physical properties of materials: I. Strengths and related properties of metals and certain other engineering materials (Govt. Print. Off., 1921), by United States. National Bureau of Standards, Herbert L. Whittemore, and Harvey Arthur Anderson (page images at HathiTrust)
• Physical properties of materials. Part I. Strengths and related properties of metals and wood (Govt. Print. Off., 1924), by United States. National Bureau of Standards and United States. Bureau of Standards (page images at HathiTrust)
• Survey of electrical resistivity measurements on 8 additional pure metals in the temperature range 0 to 273 K (U.S. Dept. of Commerce, National Bureau of Standards, 1970), by L. A. Hall, Frank E. E. Germann, Institute for Basic Standards (U.S.). Cryogenics Division, and United States. National Bureau of Standards (page images at HathiTrust)
• Survey of electrical resistivity measurements on 16 pure metals in the temperature range 0 to 273⁰ K (U.S. Dept. of Commerce, National Bureau of Standards, 1968), by L. A. Hall, Institute for Materials Research (U.S.). Cryogenics Division, and United States. National Bureau of Standards (page images at HathiTrust)
• Lorenz ratios of technically important metals and alloys (U.S. National Bureau of Standards, 1973), by J. G. Hust and L. L. Sparks (page images at HathiTrust)
• A survey of the hazards involved in processing liquid metal bonded fuels (Oak Ridge National Laboratory, 1961), by J. B. Adams, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• Mixtures of metals with molten salts (Oak Ridge National Laboratory, 1963), by M. A. Bredig, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemistry Division (page images at HathiTrust)
• Investigation of the wettability of various pure metals and alloys on beryllium (Oak Ridge National Laboratory, 1963), by Ralph Gerald Gilliland, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• The failure of structural metals subjected to strain-cycling conditions (Oak Ridge National Laboratory, 1958), by R. W. Swindeman, D. A. Douglas, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Color production from energetic ions impinging on metals (Lawrence Radiation Laboratory, 1961), by Kenneth W. Ehlers and Lawrence Radiation Laboratory (page images at HathiTrust)
• Micro determination of carbon in metals (Lawrence Radiation Laboratory, 1960), by Jack W. Frazer, Richard T. Holzmann, and Lawrence Radiation Laboratory (page images at HathiTrust)
• The diffusion of nonvolatile metallic elements in graphite (University of California Lawrence Radiation Laboratory, 1964), by J. R. Wolf, R. J. Borg, D. R. McKenzie, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• An investigation of interstitial sites in the BCC lattice (University of California Lawrence Radiation Laboratory, 1963), by Daniel N. Beshers, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Some physical, mechanical, and thermodynamic properties of transition metal refractory carbides : a bibliography (University of California Lawrence Radiation Laboratory, 1963), by Jean E. Senkin, M. Temple Milliken, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• The diffusion of cobalt in pure delta iron (University of California Lawrence Radiation Laboratory, 1962), by Richard J. Borg, Oscar H. Krikorian, David Y. F. Lai, Lawrence Radiation Laboratory, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Standards and specifications for metals and metal products. Nationally recognized standards and specifications for ores, metals, and manufactures except machinery, vehicles, and electrical supplies. (U.S. Govt. Print. Off., 1933), by George Addison Wardlaw (page images at HathiTrust)
• The removal of metals and viruses in advanced wastewater treatment sequences (Cincinnati, Ohio : Municipal Environmental Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1980., 1980), by Steven E. Esmond, D. Craig Andrews, Harold W. Wolf, Albert C. Petrasek, Municipal Environmental Research Laboratory, and Texas A & M University (page images at HathiTrust)
• Métallurgie générale : procédés métallurgiques et étude des métaux (Gauthier-Villars, 1905), by U. Le Verrier (page images at HathiTrust; US access only)
• Metalle (Anorganische Chemie 2. Teil) (G.J. Göschen, 1904), by Oskar Schmidt (page images at HathiTrust; US access only)
• Metals; their properties and treatment (Longmans, Green, and Co., 1894), by Charles Loudon Bloxam and Alfred Kirby Huntington (page images at HathiTrust)
• Physical damage in plutonium (Hanford Atomic Products Operation, 1964), by R. D. Nelson, F. E. Bowman, T. K. Bierlein, U.S. Atomic Energy Commission, and United States. Energy Research and Development Administration (page images at HathiTrust)
• Effects of hydrogen on the high-temperature flow and fracture characteristics of metals (Oak Ridge National Laboratory, 1964), by H. E. Jr McCoy and U.S. Atomic Energy Commission (page images at HathiTrust)
• Equilibrium distribution of metal-ion complexes (Oak Ridge National Laboratory, 1964), by Gerald Goldstein and U.S. Atomic Energy Commission (page images at HathiTrust)
• Deformation twinning in the columbium-vanadium alloy system (Oak Ridge National Laboratory, 1964), by David O'Brien Hobson and U.S. Atomic Energy Commission (page images at HathiTrust)
• Phase equilibrium studies in the system UC₂-ThC₂ (Oak Ridge National Laboratory, 1964), by N. A. Hill, O. B. Cavin, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Contamination of refractory metals by residual gases in vacuums below 10⁻⁶ TORR (Oak Ridge National Laboratory, 1964), by H. Inouye and U.S. Atomic Energy Commission (page images at HathiTrust)
• Eddy-current measurement of metal thickness and cladding thickness / R.A. Nance and J.W. Allen. (Oak Ridge National Laboratory, 1959), by R. A. Nance, J. W. Allen, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Beryllium thermal-cycling experiment (Oak Ridge National Laboratory, 1959), by W. H. Kelley, J. R. Tallackson, D. L. Platus, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Size effects and interstitial impurities in Nb₃Zr superconductors : superconducting solenoids with metal insulation (Oak Ridge National Laboratory, 1962), by J. O. Scarbrough, D. S. Easton, G. D. Jr Kneip, J. O. Betterton, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• The effect of high alpha radiation on the corrosion of metals exposed to chloride solutions (Oak Ridge National Laboratory, 1962), by R. D. Baybarz, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section A. (page images at HathiTrust)
• Physical chemistry of glass-metal interfaces (Lawrence Radiation Laboratory, 1965), by Joseph A. Pask, Marcus P. Borom, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, United States. Energy Research and Development Administration, U.S. Atomic Energy Commission, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Notes on the selection and use of metals in ordnance design : November 18, 1924 (Govt. Print. Off, 1924), by United States Army Ordnance Department and United States. Army. Ordnance Department. Metallurgical Board (page images at HathiTrust)
• Analysis, detection and commercial value of the rare metals. (Mining Science Pub. Co., 1910), by Julius Ohly (page images at HathiTrust; US access only)
• Metals in aircraft construction (Standard Air Press, 1920), by Wilfred Hanby (page images at HathiTrust; US access only)
• Treatment or art of the ores (Santiago, Chile, 1915), by Alvaro Alonso Barba and Charles E. M. Michels (page images at HathiTrust; US access only)
• Über die wärme-leitungsfähigkeit der metalle (Adademische verlagsgessellschaft m. b. h., 1927), by Gustav Heinrich Wiedemann, Arthur Wehnelt, and Rudolf Franz (page images at HathiTrust; US access only)
• The playbook of metals; including personal narratives of visits to coal, lead, copper, and tin mines; with a large number of interesting experiments relating to alchemy and the chemistry of the fifty metallic elements. (Routledge, Warne, and Routledge, 1861), by John Henry Pepper (page images at HathiTrust)
• Notes on the metal : being a second series of chemical notes for the lecture-room (Longmans, Green, 1868), by Thomas Wood (page images at HathiTrust)
• The playbook of metals: including personal narratives of visits to coal, lead, copper, and tin mines; with a large number of interesting experiments relating to alchemy and the chemistry of fifty metallic elements (Routledge, 1866), by John Henry Pepper (page images at HathiTrust)
• Étude sur les métaux industriels, leurs propriétés mécaniques, leurs traitements thermiques, leur utilisation (H. Morin, 1919), by Felix Turpin (page images at HathiTrust; US access only)
• Die legierungen. Handbuch für pratikur. Enthaltend die darstellung sämtlicher legierunge, amalgame und lote für die zwecke aller metallarbeiter ... (Hartleben, 1922), by Alfred Krupp (page images at HathiTrust; US access only)
• Handbuch der Materialienkunde für den Maschinenbau. (J. Springer, 1912), by Adolf Martens and E. Heyn (page images at HathiTrust; US access only)
• An absolute determination of the thermal conductivity of metals ... (Montreal, 1900), by G. Rupert Duncan (page images at HathiTrust)
• Leçons sur les métaux (Dunod, 1891), by Alfred. Ditte (page images at HathiTrust)
• die elektronentheorie der metalle, mit besonderer berücksichtigung der theorie von Bohr und der galvanomagnetischen und thermomagetischen erscheinungen (P. Haupt, 1920), by Paul Suter (page images at HathiTrust; US access only)
• Combustion of metals. (Cornell Aeronautical Laboratory, Inc., 1962), by George H. Markstein and Project Squid (page images at HathiTrust)
• Metallurgy (International Textbook Co., 1934), by Orin William McMullan and Albert M. Talbot (page images at HathiTrust)
• Electronic conduction in metals ([London, 1923), by Arthur Bramley (page images at HathiTrust; US access only)
• Metals, their properties and treatment. (Longmans, Green, and co., 1897), by Alfred Kirby Huntington, Charles Loudon Bloxam, and Walter George McMillan (page images at HathiTrust)
• The possibility of "freezing-in" radiation damage effects in simple metals (U.S. Atomic Energy Commission. Technical Information Service, 1950), by E. P. Copper, M. M. Mills, North American Aviation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The reflecting power of various metals (U.S. Dept. of Commerce and Labor, Bureau of Standards :, 1911), by William W. Coblentz and United States. National Bureau of Standards (page images at HathiTrust)
• Note on electrical conduction in metals at low temperatures (U.S. Dept. of Commerce, Bureau of Standards :, 1918), by Francis Briggs Silsbee and United States. National Bureau of Standards (page images at HathiTrust)
• A two liquid phase distribution method for the separation of metallic elements ([Lawrence] Radiation Laboratory, 1949), by M. Calvin and Berkeley. Radiation Laboratory. Department of Chemistry University of California (page images at HathiTrust)
• Arte de los metales, en que se enseña el verdadero beneficio de los de oro y plata por azogue: el modo de fundirlos todos, y como se han de refinar y apartar unos de otros. Nuevamente ahora añadido con el tratado de las antiguas minas de España, que escribió don Alonso Carrillo y Laso. Reimpreso por el Real Tribunal de Minería de esta capital de órden del Excmo. Sr. Virey. (Impr. de los Huérfanos, 1817), by Alvaro Alonso Barba and Alonso Carrillo Laso de la Vega (page images at HathiTrust)
• Metals, their properties and treatment (Longmans, Green, 1901), by Alfred Kirby Huntington, Charles Loudon Bloxam, and Walter George McMillan (page images at HathiTrust; US access only)
• Rare metal extraction by chemical engineering techniques. (Macmillan, 1963), by W. D. Jamrack (page images at HathiTrust)
• Die chemische analyse seltener technischer metalle : die bestimmungsmethoden des thorium, cer, molybdän, wolfram, vanadin, uran, titan und zirkon (Akademische Verlagsgesellschaft, 1927), by Richard Bishop Moore and Horst Eckstein (page images at HathiTrust; US access only)
• De omni rerum fosilium genere, gemmis, lapidibus, metallis, et huiusmodi, libri aliquot plerique nunc primum editi (Excudebat Iacobus Gesnerus, 1565), by Hans Jakob Gessner, Andreas Gessner, Francisco Rueo, Severin Goebel, Conrad Gessner, Georg Fabricius, Johannes Kentmann, Saint Epiphanius, Valerius Cordus, and Georg Agricola (page images at HathiTrust)
• Arte de los metales, en que se enseña el verdadero beneficio de los de oro, y plata por azogue. El modo de fundirlos todos, y como se han de refinar, y apartar vnos de otros. (En la imprenta de Bernardo Peralta. A Costa de Francisco Assensio, mercader de libros de esta corte. Hallaràse en su tienda, en las gradas de San Phelipe el Real., 1729), by Alvaro Alonso Barba and Alonso Carrillo y Laso (page images at HathiTrust)
• The failure of metals under internal and prolonged stress. A general discussion held jointly by the Faraday society, the Institution of mechanical engineers, the Iron and steel institute, the Institute of metals, North-east coast institution of engineers and shipbuilders, West Scotland iron and steel institute, and the Institution of engineers and shipbuilders in Scotland. On Wednesday, April 6, 1921, in the hall of the Institution of mechanical engineers. (The Faraday society, 1921), by F. S. Spiers (page images at HathiTrust; US access only)
• Metal worker's handy-book of receipts and processes, being a collection of chemical formulas and practical manipulations for the working of all the metal and alloys; including the decoration and beautifying of articles manufactured therefrom, as well as their preservation (H.C. Baird & co., inc., 1919), by William T. Brannt (page images at HathiTrust)
• Report of a study conducted by Analytical Reference Service (U.S. Dept. of Health, Education, and Welfare, Public Health Service, Consumer Protection and Environmental Health Service, Environmental Control Administration, 1969), by Raymond J. Lishka and J. H. Parker (page images at HathiTrust)
• Standardization of Work Measurement. Volume 7, Bench Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Microgravity science and applications program tasks (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1991), by United States. Office of Space Science and Applications and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Microgravity science and applications bibliography : 1991 revision (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by United States. Office of Space Science and Applications and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program (page images at HathiTrust)
• Chemical mechanisms and reaction rates for the initiation of hot corrosion of IN-738 (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by George C. Fryburg, Carl A. Stearns, Fred J. Kohl, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Microgravity science and applications bibliography : 1989 revision (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990), by United States. Office of Space Science and Applications and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Relationship between the ideal tensile strength and the friction properties of metals in contact with nonmetals and themselves (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Kazuhisa Miyoshi, Donald H. Buckley, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Correlation of ideal and actual shear strengths of metals with their friction properties (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1981), by Kazuhisa Miyoshi, Donald H. Buckley, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application (National Aeronautics and Space Administration ;, 1974), by J. H. Laakso, J. W. Straayer, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
• NASA TN D-2464 (National Aeronautics and Space Administration :, 1964), by Alan Arias, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust; US access only)
• NASA TN D-5353 (National Aeronautics and Space Administration ;, 1969), by Ernie W. Spisz, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-6613 (National Aeronautics and Space Administration :, 1971), by Donald W. Wisander, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6716 (National Aeronautics and Space Administration :, 1972), by Stephen V. Pepper, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Adhesion and transfer of polytetrafluoroethylene to metals studied by Auger emission spectroscopy (National Aeronautics and Space Administration ;, 1972), by Stephen V. Pepper, Donald H. Buckley, and Lewis Research Center (page images at HathiTrust)
• Adhesion of various metals to a clean iron (011) surface studied with LEED and Auger emission spectroscopy (National Aeronautics and Space Administration ;, 1971), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• NASA TN D-5724 (National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by William E. Miller, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Friction behavior of glass and metals in contact with glass in various environments (National Aeronautics and Space Administration ;, 1973), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• The miner's guide and metallurgist's directory ... (A. S. Barnes & Co. ;, 1849), by J. W. Orton (page images at HathiTrust)
• Ion-exchange separation of the akali metals (U.S. Atomic Energy Commission, Technical Information Service, 1948), by Waldo E. Cohn, Harold W. Kohn, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A two-liquid phase distribution method for the spearation of metallic elements (U.S. Atomic Energy Commission, Technical Information Division, 1950), by Melvin Calvin, University of California Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A general literature survey of diffusion in metals. (Technical Information Division, AEC, 1949), by R. O. Hutchinson (page images at HathiTrust)
• Structures and properties of intermetallic compounds. (State Univeristy of Iowa, 1952), by N. C. Baenziger, E. J. Duwell, J. W. Nielsen, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Zur geschichte der alten metalle. (Wien, 1869), by August Pfizmaier (page images at HathiTrust)
• Lagermetalle und ihre technologische Bewertung, ein Hand- und Hilfsbuch für den Betriebs-, Konstruktions- und Materialprüfungsingenieur (J. Springer, 1920), by J. Czochralski (page images at HathiTrust; US access only)
• Metals and alloys. Tables containing the percentage composition and other particulars of over 500 metals and alloys. ("The Metal Industry", 1920), by London The Metal Industry (page images at HathiTrust; US access only)
• Métaux; Chimie organique. (Hachette, 1920), by R. Lespieau (page images at HathiTrust; US access only)
• A treatise on metalliferous minerals and mining (C. Lockwood and co., 1880), by D. C. Davies (page images at HathiTrust)
• Om preseodym några af dess föreningar. ([s.n.], 1900), by Carl Götrik Adolf von Schéle (page images at HathiTrust; US access only)
• The optical properties of molten metals ([Lancaster, Pa., and Ithaca, N. Y., 1922), by Alvin Klintworth Aster (page images at HathiTrust)
• A treatise on metalliferous minerals and mining (C. Lockwood and son, 1901), by D. C. Davies and E. Henry Davies (page images at HathiTrust; US access only)
• Physical metallurgy (D. Van Nostrand Co., 1914), by Walter Rosenhain (page images at HathiTrust)
• The playbook of metals : including personal narratives of visits to coal, lead, copper, and tin mines; with a large number of interesting experiments relating to alchemy and the chemistry of fifty metallic elements (Routledge, Warne, and Routledge, 1862), by John Henry Pepper (page images at HathiTrust)
• Das Färben der Metalle. Eine Anleitung zum Färben aller wichtigen Metalle auf chemischen, elektrochemischen und mechanischen Wege. (A. Hartleben, 1912), by Friedrich Hartmann (page images at HathiTrust; US access only)
• Sidelights on aluminum and nonferrous metals (United Smelting & Aluminum Co., 1919), by Lawrence M. Brile, C. J. Wolfe, and Henry Hecht (page images at HathiTrust)
• The constructive materials of engineering (Palo Alto press, 1892), by Albert William Smith (page images at HathiTrust)
• Metals : Their properties and treatment. ([s.n.], 1901), by Alfred Kirby Huntington and Walter G. McMillan (page images at HathiTrust)
• Metallography, an introduction to the study of the structure of metals (Macmillan and co., limited;, 1902), by Arthur H. Hiorns (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1936 (Division of Mines and Geology, 1938), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1939 (Division of Mines and Geology, 1941), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1941 (Division of Mines and Geology, 1942), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1942 (Division of Mines and Geology, 1943), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1943 (Division of Mines and Geology, 1944), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1945 (Division of Mines and Geology, 1946), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1937 (Division of Mines and Geology, 1938), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1938 (Division of Mines and Geology, 1940), by Henry H. Symons (page images at HathiTrust)
• California mineral production and directory of mineral producers for 1940 (Division of Mines and Geology, 1941), by Henry H. Symons (page images at HathiTrust)
• California mineral production for 1946 (Division of Mines and Geology, 1948), by Charles Volney Averill (page images at HathiTrust)
• On the velocities of certain reactions between metals and dissolved halogens (s.n., 1910), by Ralph Gibbs Van Name and Graham Edgar (page images at HathiTrust; US access only)
• Shi ya : [3 juan] (Nong shang bu di zhi diao cha suo, 1917), by Hongzhao Zhang (page images at HathiTrust; US access only)
• Electrodecontamination of metals (Idaho Operations Office, U.S. Atomic Energy Commission, 1955), by John B. Huff, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Theoretical study of the diffusion constant for self-diffusion in metals (National Advisory Committee for Aeronautics, 1949), by M. Leichter and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Investigation of bonding between metals and ceramics. [Part] 1, Nickel, cobalt, iron or chromium with boron carbide (National Advisory Committee for Aeronautics, 1949), by H. J. Hamjian, W. G. Lidman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Further study of metal transfer between sliding surfaces (National Advisory Committee for Aeronautics, 1951), by J. T. Burwell, C. D. Strang, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
• Kritische untersuchung einiger erscheinungen : welche als wirkung der galvanischen action erklärt worden sind im allgemeinen, und über metallreduction auf nassem wege ins besondere ... ([Berlin, 1818), by Nikolaus Wolfgang Fischer (page images at HathiTrust)
• Om fremstilling af porøse metaller (s.n., 1910), by H. I. Hannover and Danmarks tekniske højskole (page images at HathiTrust; US access only)
• Recherches expérimentales sur l'élasticité des métaux, faites à l'Observatoire physique central de Russie (Imprimerie d'Alexandre Iacobson, 1860), by A. T. Kupffer (page images at HathiTrust)
• The metals in Canada a manual for explorers containing practical instructions in searching for and testing the value of metallic ores, with special reference to Canada (B. Dawson, 1861), by James L. Willson and Charles Robb (page images at HathiTrust)
• Les métaux dans les inscriptions égyptiennes (F. Vieweg, 1877), by Richard Lepsius and William B. Berend (page images at HathiTrust)
• Metallgewinnung im alterthum. [Progr. (Stockerau, 1898), by Rudolf Walz (page images at HathiTrust)
• The oxidation of metals and alloys (National Advisory Commitee for Aeronautics ;, 1952), by Erich Scheil and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• Velocity of action of oxygen, hydrogen sulfide, and halogens on metals (National Advisory Commitee for Aeronautics ;, 1952), by G. Tammann, W. K©·oster, and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• Bois et métaux (Dunod et Vicq, 1896), by E. Aucamus (page images at HathiTrust)
• The metals of the chemist : an elementary text-book for schools and colleges (Snow & Farnham, 1899), by John Howard Appleton (page images at HathiTrust)
• Métallurgie générale : procédés de chauffage : combustibles solides, description des combustibles, combustibles artificiels, emploi des combustibles, chauffage par l'électricité, matériaux réfractaires, organisation d'une usine métallurgique, données numériques (Gauthier-Villars, 1902), by U. Le Verrier (page images at HathiTrust; US access only)
• The metals of the chemist; an elementary text book for schools and colleges (Snow & Farnham, printers, 1901), by John Howard Appleton (page images at HathiTrust)
• A treatise on chemistry. (Macmillan & Co., 1890), by Henry E. Roscoe and Carl Schorlemmer (page images at HathiTrust)
• Reseña industrial e histórica de la minería i metalurjia de Chile (Imprenta nacional, 1894), by Francisco J. San Román (page images at HathiTrust)
• Screened impurity potentials in metals (U.S. Atomic Energy Commission, Division of Technical Information ;, 1959), by E.C. McIrvine, General Dynamics Corporation. General Atomic Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Theory and application of sliding contact of metals in sodium (United States Atomic Energy Commission, Technical Information Service ;, 1955), by L. F. Coffin, Knolls Atomic Power Laboratory, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Tratado de ensayes tanto por la vi a seca como por la vi a hu meda de toda clase de minerales y pastas de cobre, plomo, plata, oro, mercurio, etc., con descripcio n de los cara cteres de los principales minerales y productos de las artes en Ame rica (Libreri a de C. Bouret, 1889), by Ignacio Domeyko (page images at HathiTrust)
• Mineral production for 1913 (Division of Mines and Geology, 1914), by Edwin Snow Boalich (page images at HathiTrust)
• X-ray measurements of order in the cobalt-platinum system : technical report number 29 (Dept. of Metallurgy - Massachusetts Institute of Technology, 1955), by Peter Strom Rudman, B. L. Averbach, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Metallurgy; an introduction to the study of physical metallurgy (D. Van Nostrand company, 1915), by Walter Rosenhain (page images at HathiTrust)
• The metals; their alloys, amalgams and compounds (D. Appleton, 1932), by A. Frederick Collins (page images at HathiTrust; US access only)
• Chemistry of the metals : laboratory experiments (Oxford Book Co., Inc., 1923), by Herbert Raymond Moody (page images at HathiTrust)
• A study of the transformation point of metals (1921), by Charles E. Watson (page images at HathiTrust; US access only)
• Sources of information on the properties of metals and alloys (books) (U.S. Dept. of Commerce, National Bureau of Standards, 1938), by United States. National Bureau of Standards (page images at HathiTrust)
• Sources of information on the properties of metals and alloys. (U.S. Dept. of Commerce, National Bureau of Standards, 1943), by United States. Bureau of Standards (page images at HathiTrust)
• Study of metal-ceramic interactions at elevated temperatures : technical progress report (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1952., 1952), by F. H. Norton, W. D. Kingery, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• The solubility of salts in metals (Atomics International, 1959), by S. J. Yosim, E. B. Luchsinger, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Ultrasonic tube drawing: niobium, zircaloy-2, and copper (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1961., 1961), by William B. Tarpley, Richard Pheasant, U.S. Atomic Energy Commission. New York Operations Office, and Aeroprojects Incorporated (page images at HathiTrust)
• Preliminary note on the minor-metal content of Florida phosphate rock ([Washington D.C.] ; United States Department of the Interior, Geological Survey, 1951., 1951), by V. E. McKelvey, H. W. Worthing, James Bachelder Cathcart, U.S. Atomic Energy Commission. Raw Materials Operations, and Geological Survey (U.S.) (page images at HathiTrust)
• Effect of magnetic field upon thermal conductivity of iron, copper, silver and gold (1927), by Hugh Monroe Brown (page images at HathiTrust)
• Liquid-metals handbook : sodium-NaK supplement. (Washington, D.C. : [publisher not identified], 1955., 1955), by Carey B. Jackson, United States Navy Department Bureau of Ships, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Strength of metal aircraft elements; ANC-5 bulletin. (Dept. of the Air Force, Air Research and Development Command, 1955), by United States. ANC-5 Panel on Strength of Metal Aircraft Elements (page images at HathiTrust)
• The metalliferous resources of Washington, except iron (Hicks, 1902), by Henry Landes (page images at HathiTrust)
• The effect of surface-active agents on the mechanical properties of metals. (Wright Air Development Division, Air Research and Development Command, U. S. Air Force, 1961), by Martin Company and Irvin R. Kramer (page images at HathiTrust)
• How to weld 29 metals. (Westinghouse electric & manufacturing company, 1940), by Charles H. Jennings (page images at HathiTrust; US access only)
• Mineral production for 1914, with mining law appendix (Division of Mines and Geology, 1915), by California. Division of Mines and Geology and California State Mining Bureau (page images at HathiTrust)
• Study of metal-ceramic interactions at elevated temperatures (Cambridge, Massachusetts : Massachusetts Institute of Technology, 1951., 1951), by F. H. Norton, W. D. Kingery, and Oak Ridge U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Study of metal-ceramic interactions at elevated temperatures : progress report (Cambridge, Massachusetts : Massachusetts Institute of Technology, 1952., 1952), by F. H. Norton, W. D. Kingery, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Study of metal-ceramic interactions at elevated temperatures (Cambridge, Massachusetts : Massachusetts Institute of Technology, 1952., 1952), by F. H. Norton, W. D. Kingery, Massachusetts Institute of Technology, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Study of metal-ceramic interactions at elevated temperatures. [Part] I, Furnace and method for use of the sessile drop method-surface tension of silicon, iron, and nickel : surface tension at elevated temperatures (Cambridge, Massachusetts : Massachusetts Institute of Technology, 1953., 1953), by W. D. Kingery, M. Jr Humenik, Massachusetts Institute of Technology, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Electrical and electronic properties of materials: information retrieval program. (Directorate of Materials and Processes, Aeronautical Systems' Division, Air Force Systems Command, 1962), by Hughes Aircraft Company and H. Thayne Johnson (page images at HathiTrust; US access only)
• Literature survey on the preparation of metals from organometallic compounds (Air Force Cambridge Research Laboratories, Office of Aerospace Research, U.S. Air Force, 1963), by Minoru Tsutsui and Donald Lorenz (page images at HathiTrust; US access only)
• Solid state diffusion in metals and alloys (U. S. Atomic Energy Commission, Division of Technical Information, 1964), by S. D. Gert︠s︡riken and I. I︠A︡. Dekhti︠a︡r (page images at HathiTrust; US access only)
• Metals and alloys (Chemical, 1950) (page images at HathiTrust; US access only)
• Diffusion of metals; exchange reactions. (U.S. Atomic Energy Commission, Division of Technical Information Extension, 1962), by Wolfgang Seith and Theodor Heumann (page images at HathiTrust)
• A study of isochromatic lines in transparent models under finite plastic deformation (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Technical Information Service, 1953., 1953), by S. I. Gubkin, S. I. Dobrovolsky, U.S. Atomic Energy Commission, and National Science Foundation (U.S.) (page images at HathiTrust)
• Progress report on study of metal-ceramic interactions at elevated temperatures (Massachusetts Institute of Technology, 1953), by F. H. Norton, W. D. Kingery, and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Beiträge zur kenntniss von komplexen ammoniakhydroxyden des kupfers, nickels, cadmiums, zinks & silbers ... (Helsingfors, 1904), by W. Bonsdorff (page images at HathiTrust; US access only)
• Interactions of metals and simple oxyanions in water (North Dakota Water Resources Research Institute, North Dakota State University, 1975), by John Knoeck and North Dakota Water Resources Research Institute (page images at HathiTrust; US access only)
• Determination of background concentrations of inorganics in soils and sediments at hazardous waste sites (U.S. Environmental Protection Agency;, 1995), by R. P. Breckenridge, A. B. Crockett, and Idaho National Engineering Laboratory (page images at HathiTrust)
• Diffusion rates and solubilities of interstitials in refractory metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by W. D. Klopp, V. D. Barth, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Introduction to metals for elevated-temperature use (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by James E. Campbell, B. C. Allen, R. W. Douglass, H. J. Wagner, H. B. Goodwin, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• The application of ultrasonic energy in the deformation of metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1963., 1963), by Alan R. Rosenfield and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Metal deformation processing. Volume I, A survey conducted as part of the metalworking process and equipment program (mpep) (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1964., 1964), by F. W. Boulger, D. E. Strohecker, Alvin M. Sabroff, Alan R. Rosenfield, C. N. Reid, H. R. Ogden, M. J. Klein, J. A. Houck, Allan H. Clauer, W. M Baldwin, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• High-purity metals (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by George W. P. Rengstorff, Defense Metals Information Center (U.S.), Air Force Materials Laboratory (U.S.), and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• Ignition of metals in oxygen (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1966., 1966), by E. L. White, J. J. Ward, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Current problems in prevention of fatigue (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1968., 1968), by H. J. Grover, A. A. Mittenbergs, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Plane-strain fracture-toughness data for selected metals and alloys (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1969., 1969), by James E. Campbell and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Survey of the extent of testing facilities for the determination of mechanical and physical properties of metals at various temperatures (Columbus, Ohio : Titanium Metalllurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by W. P. Achbach and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Metals: their properties and treatment. (Longmans, 1870), by Charles Loudon Bloxam (page images at HathiTrust)
• The metal cleaning handbook; equipment, methods, and materials with practical suggestions for their use (Magnus chemical company, 1935), by Robert Watkeys Mitchell and Garwood Magnus chemical company (page images at HathiTrust; US access only)
• The metal worker's handy-book of receipts and processes : being a collection of chemical formulas and practical manipulations for the working of all the metals and alloys including the decoration and beautifying of articles manufactured therefrom, as well as their preservation (H. Carey Baird & Co. ;, 1890), by William T. Brannt (page images at HathiTrust)
• Methods for the determination of metals in environmental samples (Chemistry Research Division, Environmental Monitoring Systems Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1991), by Nev.). Chemistry Research Division Environmental Monitoring Systems Laboratory (Las Vegas and United States. Environmental Protection Agency. Office of Research and Development (page images at HathiTrust)
• The history and achievements of the Institute of Metals (British). (Buffalo, New York The Institute, 1912), by G. Shaw Scott, American Institute of Metals, and Institute of Metals (page images at HathiTrust)
• Aircraft metals (U.S. G.P.O., 1944), by United States Bureau of Naval Personnel and United States. Naval Air Technical Training Command (page images at HathiTrust; US access only)
• Metals, their properties and treatment. (Longmans, Green, and co., 1914), by A. K. Huntington and Walter McMillan (page images at HathiTrust; US access only)
• A re-determination of the heats of oxidation of certain metals ([Easton, Pa., 1924), by Joe Eugene Moose and Samuel Wilson Parr (page images at HathiTrust)
• Thermal conductivities of some metals in the solid and liquid states (The Ohio state university, 1923), by William Byron Brown (page images at HathiTrust; US access only)
• Manner of locating and holding mineral claims in California (with forms). (Division of Mines and Geology, 1946), by California. Division of Mines and Geology (page images at HathiTrust; US access only)
• The use of metals, a story shorn of bewildering technicalities, throwing light upon some of the things, which, heretofore, might not have been fully recongized as elements contributing to accepted Hupmobile quality. (Hupp Motor Car Corporation, 1922), by Hupp Motor Car Corporation (page images at HathiTrust)
• Les métaux et leurs conditions d'emploi dans l'industrie moderne. ([Macon, Protat frères imprimeurs], 1918), by Jean Oertlé (page images at HathiTrust; US access only)
• An Equation of state for shocked polyurethane foam (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California / by Charles L. Mader and William J. Carter., 1969), by Charles L. Mader, W. J. Carter, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Progress report no. 26 covering period from February 1, 1961 to March 31, 1961. (West Chester, Pennsylvania : Aeroprojects Incorporated, 1961., 1961), by Aeroprojects Incorporated and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Progress report no. 27 covering period from April 1, 1961 to May 31, 1961. (West Chester, Pennsylvania : Aeroprojects Incorporated, 1961., 1961), by Aeroprojects Incorporated and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Progress report no. 28 covering period from June 1, 1961 to July 31, 1961. (West Chester, Pennsylvania : Aeroprojects Incorporated, 1961., 1961), by Aeroprojects Incorporated and U.S. Atomic Energy Commission. New York Operations Office (page images at HathiTrust)
• Chemical equilibria in hot air with moisture, salt, and vaporized metal contaminants (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1975., 1975), by John Zinn, C. Dexter Sutherland, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Evaluation of the LASL automated spectrophotometer for uranium determination at submilligram levels (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1977., 1977), by R. M. Hollen, J. E. Rein, D. D. Jackson, United States. Energy Research and Development Administration, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A Procedure for the analysis of americium in complex matrices (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1978., 1978), by Daryl Knab, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Kriging analysis of uranium concentrations in Test Area C-74L, Eglin Air Force Base, Florida (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by Gary C. White, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Friction and wear screening tests of materials in sodium (Canoga Park, California : Atomics International, Liquid Metal Engineering Center, 1970., 1970), by Nathan J. Hoffman, J. J. Droher, D. E. Goggin, U.S. Atomic Energy Commission, North American Rockwell Corporation. Atomics International Division, and Liquid Metal Engineering Center (U.S.) (page images at HathiTrust)
• Space nuclear safety and fuels program : March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Spectrophotometric determination of plutonium with chlorophosphonazo III in n-pentanol (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1982., 1982), by N. M. Saponara, S. F. Marsh, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Quarterly technical progress report : AEC unclassified programs : October-December 1968 ([Canoga Park, California] : Atomics International, A Division of North American Rockwell Corporation, [1969]., 1969), by Rockwell International. Atomics International Division and U.S. Atomic Energy Commission (page images at HathiTrust)
• Memoire concernant les mines de France (Chez P. Witte :, 1733), by Alvaro Alonso Barba and Charles Hautin de Villars (page images at HathiTrust)
• The electrolytic corrosion of some metals ... ([Ithaca, N.Y., 1911), by Gorrell Robert White (page images at HathiTrust)
• Effect of sulphuric acid on the deposition of metals when using a mercury cathode and rotating anode. (American Philosophical Society, 1906), by Lily Gavit Kollock and Edgar F. Smith (page images at HathiTrust)
• Prediction of Thermal Conductivity of Metallic Elements and Their Dilute Alloys at Cryogenic Temperatures (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by A. Cezairliyan, United States. Air Force. Systems Command. Aeronautical Systems Division, Purdue University, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Wright-Patterson Air Force Base (Ohio) (page images at HathiTrust)
• Experimental study of fatigue crack propagation and retardation using polymethylmethacrylate (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Air Force Systems Command, 1972., 1972), by Francis J. Pitoniak and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• Electron optical studies of heteroepitaxial growth of beta Silicon carbide layers through molten metal intermediates (L.G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1970., 1970), by Joseph J. Comer, Irvin Berman, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Backdirected electron yields from metals bombarded by 0.4-MeV to 1.4-MeV electrons (L.G. Hansom Field, Bedford, Massachusetts : Air Force Cambridge Research Laboratories, Office of Aerospace Research, United States Air Force, 1969., 1969), by A. R. Frederickson and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Absolute yields of x-ray induced photoemission from metals (L.G. Hanscom Field, Massachusetts : Air Force Cambridge Research Laboratories, Air Force System Command, United States Air Force, 1972., 1972), by John N. Bradford and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• The diffusion of hydrogen through hot metals (Lincoln, Neb. : [University of Nebraska press], 1923., 1923), by Bernard Clifford Hendricks (page images at HathiTrust)
• Aerospace structural metals handbook. (Air Force Materials Laboratory, Air Force Systems Command, 1970), by Inc. Mechanical Properties Data Center Belfour Stulen and Syracuse University. Research Institute (page images at HathiTrust)
• The surface tension of metals with reference to soldering conditions ([Easton, Pa., 1927), by Alden Williams Coffman and Samuel Wilson Parr (page images at HathiTrust)
• Arte de los metales. English (London : Printed for S. Mearne ..., 1674), by Alvaro Alonso Barba and Edward Montagu Sandwich (HTML at EEBO TCP)
• Paracelsvs of the [brace] chymical transmutation, genealogy and generation [brace] of metals & minerals.: Also, of the urim and thummim of the Jews. With an appendix, of the vertues and use of an excellent water made by Dr. Trigge. The second part of the mumial treatise. Whereunto is added, philosophical and chymical experiments of that famous philosopher Raymvnd Lvlly; containing, the right and due composition of both elixirs. The admirable and perfect way of making the great stone of the philosophers, as it was truely taught in Paris, and sometimes practised in England, by the said Raymund Lully, in the time of King Edw. 3. / Translated into English by R. Turner philomathēs. (London : Printed for Rich: Moon at the seven Stars, and Hen: Fletcher at the three gilt Cups in Paul's Church-yard, 1657), by Paracelsus and Robert Turner (HTML at EEBO TCP)

More items available under broader and related terms at left.