The Online Books Page

Mining machinery -- Electric equipment -- Safety measures

See also what's at your library, or elsewhere.

• Mining machinery -- Electric equipment
• Mining machinery -- Safety measures

• Mining machinery -- Electric equipment -- United States -- Safety measures

• The Bureau of Mines ground-fault protection research program : a summary (U.S. Dept. of the Interior, Bureau of Mines, 1990), by M. R. Yenchek and A. J. Hudson (page images at HathiTrust)
• A statistical determination of spark ignition safety factors in methane, propane, and ethylene mixtures in air (U.S. Dept. of the Interior, Bureau of Mines, 1986), by James C. Cawley (page images at HathiTrust)
• Probability of spark ignition in intrinsically safe circuits (Bureau of Mines Research Center, 1988), by James C. Cawley (page images at HathiTrust)
• Probability of resistive spark ignition caused by very low currents (U.S. Dept. of the Interior, Bureau of Mines, 1987), by James C. Cawley (page images at HathiTrust)
• The Bureau of Mines ground-fault protection research program : a summary (U.S. Dept. of the Interior, Bureau of Mines, 1990), by M. R. Yenchek, A. J. Hudson, and United States Bureau of Mines (page images at HathiTrust)
• Stacker operator, with 2 years of mining experience, was fatally injured when he became entangled in the unguarded pinch point of a conveyor tail pulley he was cleaning (U.S. Dept. of Labor, Mine Safety and Health Administration, Metal and Nonmetal Mine Safety and Health, 1998), by United States. Metal and Nonmetal Mine Safety and Health (page images at HathiTrust)

• Stacker operator, with 2 years of mining experience, was fatally injured when he became entangled in the unguarded pinch point of a conveyor tail pulley he was cleaning (U.S. Dept. of Labor, Mine Safety and Health Administration, Metal and Nonmetal Mine Safety and Health, 1998), by United States. Metal and Nonmetal Mine Safety and Health (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Mine power systems research (in four parts) : 4. transients and enclosures (U.S. Dept. of the Interior, Bureau of Mines :, 1979), by United States Bureau of Mines (page images at HathiTrust)
• AC impedance measurements used to locate faults in mining power cables (Dept. of the Interior, Bureau of Mines, 1977), by Richard Hammer and George J. Conroy (page images at HathiTrust)
• Electric-shovel trailing cables (U.S. Dept. of the Interior, Bureau of Mines, 1936), by F. S. Crawford and United States Bureau of Mines (page images at HathiTrust)
• Load modeling of continuous miner induction motors (Dept. of Electrical Engineering, 1978), by Lloyd A. Morley, Randy C. Jamison, Frederick C. Trutt, Pennsylvania State University. Dept. of Electrical Engineering, and United States Bureau of Mines (page images at HathiTrust)
• A general design and implementation procedure for sensor-based electrical diagnostic systems for mining machinery (Washington, D.C. : U.S. Department of Interior, Bureau of Mines, 1993., 1993), by Jeffrey L. Kohler, J. Sottile, and United States Bureau of Mines (page images at HathiTrust)

• Permissible electric face equipment and other mine equipment approved from January 1969 through December 1974 : a supplement to Bureau of Mines Bulletin 543, and Bureau of Mines Information Circulars 8220, 8299, 8372, and 8463 (Dept. of the Interior, Mining Enforcement and Safety Administration, 1977), by F. R. Lee and United States. Mining Enforcement and Safety Administration (page images at HathiTrust)

• Permissibility, electric face equipment. (U.S. Dept. of Labor, Mine Safety and Health Administration, 2002), by United States. Mine Safety and Health Administration (page images at HathiTrust)
• Permissibility, electric face equipment. (U.S. Dept. of Labor, Mine Safety and Health Administration, 1991), by United States. Mine Safety and Health Administration (page images at HathiTrust)

• Inspection and testing of mine-type electrical equipment for permissibility : revision of Information circular 7185 (U.S. Dept. of the Interior, Bureau of Mines, 1954), by L. C. Isley, H. B. Brunot, E. J. Gleim, and United States Bureau of Mines (page images at HathiTrust)
• Inspection and testing of mine-type electrical equipment for permissibility (U.S. Dept. of the Interior, Bureau of Mines, 1941), by L. C. ILsley, H. B. Brunot, E. J. Gleim, and United States Bureau of Mines (page images at HathiTrust)

• Impact of current load on mine trailing cable thermal life (U.S. Dept. of the Interior, Bureau of Mines, 1991), by M. R. Yenchek and Peter G. Kovalchik (page images at HathiTrust)

• Thermal characteristics of energized coal mine trailing cables (U.S. Dept. of the Interior, Bureau of Mines, 1988), by M. R. Yenchek and Peter G. Kovalchik (page images at HathiTrust)
• Permissible electrically operated pumps (U.S. Dept. of the Interior, Bureau of Mines, 1940), by L. C. Ilsley, H. B. Brunot, E. J. Gleim, and United States Bureau of Mines (page images at HathiTrust)
• Suggested safety rules for installing and using electrical equipment in coal mines (U.S. Dept. of Commerce, Bureau of Mines, 1930), by L. C. Ilsley (page images at HathiTrust)

• Thermal modeling of portable power cables (U.S. Dept. of the Interior, Bureau of Mines, 1993), by M. R. Yenchek, John C. Edwards, Gregory P. Cole, and United States Bureau of Mines (page images at HathiTrust)

• A testing procedure for the certification of underground protective cabs and canopies ([Washington] : U. S. Dept. of the Interior, Mining Enforcement and Safety Administration, [1974], 1974), by Stephen Gerard Sawyer, Darryl K. Brogan, and United States. Mining Enforcement and Safety Administration (page images at HathiTrust)
• Cabs and canopies for underground coal mining equipment : proceedings (U.S. Dept. of the Interior, Bureau of Mines, 1985), by W. Va.) Bureau of Mines Technology Transfer Seminar (1983 : Charleston and William W. Aljoe (page images at HathiTrust)
• Overspeed protection for mine diesels : a literature review (U.S. Dept. of the Interior, Bureau of Mines, 1984), by Lito C. Mejia and Robert W. Waytulonis (page images at HathiTrust)
• Improved backup alarm technology for mobile mining equipment (U.S. Dept. of the Interior, Bureau of Mines, 1986), by Guy A. Johnson, Linneas W. Laage, and Russell E. Griffin (page images at HathiTrust)
• Hose safety during high-pressure water-jet cutting (U.S. Dept. of the Interior, Bureau of Mines, 1987), by E.D. Thimons, H.J. Handewith, J.L. Thompson, and Charles D. Taylor (page images at HathiTrust)
• Cutting parameters affecting the ignition potential of conical bits (U.S. Dept. of the Interior, Bureau of Mines, 1983), by Bruce D. Hanson (page images at HathiTrust)
• Failure analysis of diesel exhaust-gas water scrubbers (U.S. Dept. of the Interior, Bureau of Mines, 1982), by Robert W. Waytulonis, Lito C. Mejia, and Sean D. Smith (page images at HathiTrust)
• Use of diesel engines in tunnels (U.S. Dept. of the Interior, Bureau of Mines, 1942), by S. H. Ash and L. L. Naus (page images at HathiTrust)
• Safety with mobile diesel-powered equipment underground (U.S. Dept. of the Interior, Bureau of Mines, 1960), by John C. Holtz (page images at HathiTrust)
• Observations on the use of a diesel freight locomotive through a railway tunnel (U.S. Dept. of the Interior, Bureau of Mines, 1946), by L. B. Berger and L. H. McGuire (page images at HathiTrust)
• Elastic plane frame analysis of semisymmetric cabs and canopies used on underground electric face equipment (U.S. Dept. of Interior, Bureau of Mines, 1973), by Stephen Gerard Sawyer, Darryl K. Brogan, Pittsburgh Technical Support Center, and United States Bureau of Mines (page images at HathiTrust)
• Some haulage safety devices for use on grades, slopes, and inclined shafts (U.S. G.P.O., 1942), by G. W. Grove, E. J. Ristedt, S. H. Ash, and United States Bureau of Mines (page images at HathiTrust)
• Gasoline engines in mines (U.S.Bureau of Mines, 1917), by R. H. Kudlich, Edwin Higgins, and United States Bureau of Mines (page images at HathiTrust)
• Job safety guide trailing cable splicing (U. S. Dept. of the Interior, Mining Enforcement and Safety Administration, 1974), by United States. Mining Enforcement and Safety Administration (page images at HathiTrust; US access only)
• Review of technology available to the underground mining industry for control of diesel emissions (U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Pittsburgh Research Laboratory, 2002), by George H. Schnakenberg, Aleksandar D. Bugarski, and Pittsburgh Research Laboratory (National Institute for Occupational Safety and Health) (page images at HathiTrust)
• Underground loading devices in metal mines (U.S. Dept. of the Interior, Bureau of Mines, 1921), by C. Lorimer Colburn and United States Bureau of Mines (page images at HathiTrust)
• Hose safety during high-pressure water-jet cutting (U.S. Dept. of the Interior, Bureau of Mines, 1987), by Charles D. Taylor (page images at HathiTrust)
• Overspeed protection for mine diesels : a literature review (U.S. Dept. of the Interior, Bureau of Mines, 1984), by Lito C. Mejia and Robert W. Waytulonis (page images at HathiTrust)
• Improved backup alarm technology for mobile mining equipment (U.S. Dept. of the Interior, Bureau of Mines, 1986), by Guy A. Johnson, Linneas W. Laage, and Russell E. Griffin (page images at HathiTrust)
• Plant operator with 9 months of mining experience was fatally injured when he was caught in a conveyor tail pulley (U.S. Dept. of Labor, Mine Safety and Health Administration, Metal and Nonmetal Mine Safety and Health ;, 1998), by United States. Metal and Nonmetal Mine Safety and Health (page images at HathiTrust)

• Cabs and canopies for underground coal mining equipment : proceedings (U.S. Dept. of the Interior, Bureau of Mines, 1985), by W. Va.) Bureau of Mines Technology Transfer Seminar (1983 : Charleston and William W. Aljoe (page images at HathiTrust)
• Cabs and canopies for underground coal mining equipment : proceedings (U.S. Dept. of the Interior, Bureau of Mines, 1985), by W. Va.) Bureau of Mines Technology Transfer Seminar (1983 : Charleston and William W. Aljoe (page images at HathiTrust)

• Evaluation of a combined face ventilation system used with a remotely operated mining machine (U.S. Dept. of the Interior, Bureau of Mines, 1982), by Edward F. Divers, J. Custer, and Natesa I. Jayaraman (page images at HathiTrust)
• Preliminary evaluation of bit impact ignitions of methane using a drum-type cutting head (U.S. Dept. of the Interior, Bureau of Mines, 1982), by Wallance W. Roepke, Carl F. Wingquist, V. William Dellorfano, and David A. Larson (page images at HathiTrust)
• Effect of shearer web depth on dust generation and methane liberation (U.S. Dept. of the Interior, Bureau of Mines, 1988), by John A. Organiscak, A. B. Cecala, and D. M. Doyle-Coombs (page images at HathiTrust)
• Mining roof bolting machine safety : a study of the drill boom vertical velocity (U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Pittsburgh Research Laboratory ;, 2005), by Dean H. Ambrose (page images at HathiTrust)
• Permissible electrically operated pumps (U.S. Dept. of the Interior, Bureau of Mines, 1940), by L. C. Ilsley, H. B. Brunot, E. J. Gleim, and United States Bureau of Mines (page images at HathiTrust)
• Evaluation of a combined face ventilation system used with a remotely operated mining machine (U.S. Dept. of the Interior, Bureau of Mines, 1982), by Edward F. Divers, J. Custer, and Natesa I. Jayaraman (page images at HathiTrust)
• Requirements for roll-over protective structures and falling object protective structures for surface coal mines and surface areas of underground coal mines (Dept. of the Interior, Mining Enforcement and Safety Administration, 1977), by Edward E. Hollop and United States. Mining Enforcement and Safety Administration (page images at HathiTrust)

More items available under broader and related terms at left.