The Online Books Page

Plastic analysis (Engineering)

See also what's at your library, or elsewhere.

Broader term:

Structural analysis (Engineering)

Narrower terms:

Used for:

Analysis, Plastic
Limit analysis (Engineering)
Plastic analysis (Theory of structures)
Ultimate strength analysis

Filed under: Plastic analysis (Engineering)

Reliability basis of load and resistance factors for reinforced concrete design (U.S. Dept. of Commerce, National Bureau of Standards :, 1978), by Bruce R. Ellingwood, Center for Building Technology, and United States. National Bureau of Standards (page images at HathiTrust)
Procedures for experimental measurement and theoretical analysis of large plastic deformations (National Aeronautics and Space Administration ;, 1974), by Richard E. Morris and Lewis Research Center (page images at HathiTrust)
Comparison of results of liquid limit tests by standard and one-point methods. (Waterways Experiment Station, 1962), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
Example calculations illustrating methods for analyzing ductile flaw stability in nuclear prssure vessels (Division of Safety Technology, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1983), by J. G. Merkle, R. Johnson, and U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Safety Technology (page images at HathiTrust)
The plastic behavior of structural members and frames : a summary report of demonstration tests conducted during the Summer course: Plastic design in structural steel, sponsored by Lehigh University and the American Institute of Steel Construction (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by George C. Driscoll and Lynn S. Beedle (page images at HathiTrust; US access only)
Masonry research for limit-states design (U.S. Army Engineer Waterways Experiment Station, 1994), by Michael I Hammons, Structures Laboratory (U.S.), Construction Productivity Advancement Research Program (U.S.), U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)
Rectangular plates : a new approach (Washington, D.C. : United States Air Force, Office of Scientific Research, 1958, 1958), by Patrick M. Quinlan, United States. Air Force. Office of Scientific Research, and National University of Ireland (page images at HathiTrust)

Filed under: Plastic analysis (Engineering) -- Bibliography

Plastic design in high strength steel: the experimental bases for plastic design; a survey of the literature (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1963), by M. G. Lay, Fritz Engineering Laboratory, United States. Navy Dept, and Welding Research Council (U.S.) (page images at HathiTrust; US access only)

Filed under: Yield-line analysis

Effects of thermomechanical processing on strength and toughness of iron - 12-percent-nickel - reactive metal alloys at -196C̊ (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Joseph R. Stephens, Walter R. Witzke, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
Stress and strain distributions in a thick-walled cylinder of strain-hardening material, elastic-plastically strained by internal pressure (NASA ;, 1965), by C. K. Liu (page images at HathiTrust)
Example calculations illustrating methods for analyzing ductile flaw stability in nuclear prssure vessels (Division of Safety Technology, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1983), by J. G. Merkle, R. Johnson, and U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Safety Technology (page images at HathiTrust)

Items below (if any) are from related and broader terms.

Filed under: Structural analysis (Engineering)

The Analysis of Structures, Based on the Minimal Principles and the Principle of Virtual Displacements (New York: J. Wiley and Sons; London: Chapman and Hall Ltd., c1956), by Nicholas J. Hoff (page images at HathiTrust)
Elastic Energy Theory (second edition; New York: J. Wiley and Sons; London: Chapman and Hall, c1942), by John Abraham Van den Broek (page images at HathiTrust)
Skew Plates and Structures (New York: Macmillan, 1963), by L. S. D. Morley (page images at HathiTrust)
Plastic Analysis of Structures (New York: McGraw-Hill, 1959), by Philip Gibson Hodge (page images at HathiTrust)
Introduction to Structural Stability Theory (New York et al.: McGraw-Hill Book Co., 1962), by George Gerard (page images at HathiTrust)
Proceedings of the Seminar on the theory of structures ... ([s.l.], 1930), by University of Michigan. College of Engineering (page images at HathiTrust; US access only)
Computer analysis of structures. ([Ann Arbor, Mich.], 1963), by Glen V. Berg (page images at HathiTrust)
The A. I. S. C. textbook of structural shop drafting. (New York, 1950), by American Institute of Steel Construction (page images at HathiTrust)
Principles of structural integrity technology (Office of Naval Research ;, 1977), by William S. Pellini (page images at HathiTrust)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design, with examples and problems (J. Wiley & Sons; [etc., etc.], 1905), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
Reinforced brick masonry and lateral force design (Structural Clay Products Institute, 1953), by Harry Custer Plummer and John A. Blume (page images at HathiTrust)
Die statik des eisenbaues (R. Oldenbourg, 1917), by W. L. Andrée (page images at HathiTrust; US access only)
Problems in structural design, by Carlton Thomas Bishop. (J. Wiley & Sons;, 1927), by Carlton Thomas Bishop (page images at HathiTrust; US access only)
Structural design in metals (Ronald Press Co., 1949), by Clifford David Williams and Ernest C. Harris (page images at HathiTrust)
Die Knickfestigkeit. (J. Springer, 1921), by Rudolf Mayer (page images at HathiTrust; US access only)
Structural design in theory and practice. (Constable & company ltd., 1923), by Henry Adams (page images at HathiTrust)
Elastic behavior of structural members : the frame constant method. (Opla Co., 1956), by Odd Per Leif Albert (page images at HathiTrust)
Statically indeterminate structures : approximate analysis by deflected structures and lateral load analysis. (McGraw-Hill, 1959), by Jack R. Benjamin (page images at HathiTrust)
Theory of structures and strength of materials. (J. Wiley & Sons, 1893), by Henry Taylor Bovey (page images at HathiTrust)
The strains in framed structures, with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings. (J. Wiley & sons, 1883), by A. Jay Du Bois (page images at HathiTrust)
The stresses in framed structures. Including the strength of materials and theory of flexure. (J. Wiley & Sons, 1896), by A. Jay Du Bois (page images at HathiTrust)
Theory of statically indeterminate structures (McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
Die statik des ebenen tragwerkes (J. Springer, 1925), by Martin Grn̈uning (page images at HathiTrust; US access only)
Elements of structural engineering. (Ronald P., 1954), by Ernest C. Harris (page images at HathiTrust)
Statically indeterminate frameworks. (University of North Carolina Press, 1937), by Thomas Felix Hickerson (page images at HathiTrust)
The elements of structures. (McGraw-Hill, 1912), by George A. Hool (page images at HathiTrust; US access only)
Steel and timber structures. (McGraw-Hill book company, inc., 1924), by George Albert Hool and W. S. Kinne (page images at HathiTrust)
Steel and timber structures (McGraw-Hill, 1942), by George Albert Hool, Dalzell Melvin Griffith, R. R. Zipprodt, and W. S. Kinne (page images at HathiTrust; US access only)
Structural members and connections (McGraw-Hill Book Company, inc., 1943), by George A. Hool, Ferdinand Northrup Menefee, Roy Richard Zipprodt, and W. S. Kinne (page images at HathiTrust; US access only)
Fundamentals of structural analysis (Van Nostrand, 1953), by A. A. Jakkula and Henson K. Stephenson (page images at HathiTrust)
The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice. (J. Wiley & sons; [etc., etc.], 1911), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice (J. Wiley & sons ;, 1951), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
Structural engineering (McGraw-Hill, 1933), by John Edward Kirkham (page images at HathiTrust)
Practical structural design; a text and reference work for engineers, architects, builders, draftsmen and technical schools (U. P. C. book company, inc., 1921), by Ernest McCullough (page images at HathiTrust)
Theory of structural analysis and design. (Ronald Press Co., 1958), by James P. Michalos (page images at HathiTrust)
Kinetic theory of engineering structures dealing with stresses, deformations and work for the use of students and practitioners in civil engineering (McGraw-Hill book company, 1911), by David A. Molitor (page images at HathiTrust)
Theory of structures (Longmans, Green and co., 1918), by Arthur Morley (page images at HathiTrust; US access only)
Structural frameworks (Wiley, 1943), by Clyde T. Morris and Samuel T. Carpenter (page images at HathiTrust)
Stabilité des constructions usuelles; calculs algébriques et graphiques des efforts dans l'ossature principale ... (Dunod, 1926), by Louis Rousselet and Aimé Petitet (page images at HathiTrust; US access only)
Theory of simple structures (J. wiley & Sons, 1931), by Thomas Clark Shedd and Jamison Vawter (page images at HathiTrust)
Manual of moment design (H. M. Ives & sons, 1941), by Jack Singleton and American Institute of Steel Construction (page images at HathiTrust)
The theory of structures (McGraw-Hill book company, inc., 1928), by Charles M. Spofford (page images at HathiTrust)
The theory of structures (McGraw-Hill Book Company, 1939), by Charles M. Spofford (page images at HathiTrust)
Structural engineering (McGraw-Hill Co., 1924), by George Fillmore Swain (page images at HathiTrust)
Elementary theory and design of flexural members (Wiley, 1950), by Jamison Vawter and James G. Clark (page images at HathiTrust)
Engineering construction in steel and timber (Longmans, Green, and co., 1910), by William Henry Warren (page images at HathiTrust)
Engineering construction ... (Longmans, Green and Co., 1921), by William Henry Warren (page images at HathiTrust)
Elementary structural problems in steel and timber (J. Wiley & Sons, inc.;, 1929), by C. R. Young (page images at HathiTrust)
Elementary structural problems in steel and timber (J. Wiley, 1949), by C. R. Young and Carson F. Morrison (page images at HathiTrust)
Concepts of structure. (Reinhold, 1963), by William Zuk (page images at HathiTrust)
Analysis of rigid frames (an application of slope deflection) (U.S. Govt. Print. Off., 1942), by Arsham Amirikian (page images at HathiTrust)
Stress analysis and design of elementary structures. (J. Wiley, 1948), by James H. Cissel (page images at HathiTrust)
Cours de stabilité des constructions (A. Uystpruyst; [etc., etc.], 1920), by A. Vierendeel (page images at HathiTrust; US access only)
A text-book on roofs and bridges ... (J. Wiley & sons; [etc., etc.], 1888), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
A text-book on roofs and bridges (Wiley, 1896), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
Structural deflections; a literature and state-of-the-art survey (U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1973), by T. V. Galambos (page images at HathiTrust)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design, with examples and problems (J. Wiley & sons; [etc., etc.], 1907), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
Theory and practice in designing (Constable & company ltd., 1911), by Henry Adams (page images at HathiTrust)
The theory and design of structures : a text-book for the use of students, draughtsmen, and engineers engaged in constructional work. (Chapman & Hall, 1913), by Ewart S. Andrews (page images at HathiTrust; US access only)
Materials and construction; a theoretical and practical treatise on the strains, designing, and erection of works of construction (C. Lockwood and son, 1881), by Francis Campin (page images at HathiTrust)
Théorie de l'équilibre des systèms élastiques et ses applications (A. F. Negro, 1879), by Alberto Catigliano (page images at HathiTrust)
Rigid frames (Edwards brothers, Inc., 1938), by Leonard Thomas Evans (page images at HathiTrust)
The theory and practice of modern framed structures : Designed for the use of schools, and for engineers in professional practice (J. Wiley & sons; [etc., etc.], 1905), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
Structural engineering (McGraw-Hill book co., inc., 1914), by John Edward Kirkham (page images at HathiTrust)
Practical design of structural members. (Philly Litho Co.;, 1957), by Thomas A Lucy (page images at HathiTrust)
Framed structures and girders, theory and practice. Volume I. Stresses, part I. (McGraw-Hill book company, 1911), by Edgar Marburg (page images at HathiTrust; US access only)
Calcul des constructions hyperstatiques; application d'une méthode très simple, cadres et portiques en ciment armé (Dunod, 1927), by Josef Rieger and P. Carot (page images at HathiTrust; US access only)
The theory of continuous structures and arches (McGraw-Hill book company, inc., 1937), by Charles M. Spofford (page images at HathiTrust; US access only)
The theory of structures (McGraw-Hill Book Company, 1915), by Charles M. Spofford (page images at HathiTrust)
Structural design ... (D. Van Nostrand company, 1913), by Horace Richmond Thayer (page images at HathiTrust)
Simplified problems in strength of materials and structural design. (Arco, 1956), by Ephraim Viertels (page images at HathiTrust)
The theory of structures (E. Arnold, 1909), by Richard John Woods (page images at HathiTrust; US access only)
Strength and elasticity of structural members (E. Arnold, 1903), by Richard John Woods (page images at HathiTrust; US access only)
Strength and elasticity of structural members (E. Arnold, 1906), by Richard John Woods (page images at HathiTrust; US access only)
Statische untersuchung von bogen- und wölb-tragwerken in stein, eisen, beton oder eisenbeton nach den grundsätzen der elastizitätstheorie unter anwendung des verfahrens mit konstanten bogen-grössen ... (Wilhelm Ernst & Sohn, 1908), by Robert Schönhöfer (page images at HathiTrust; US access only)
Architectural mechanics; statics and strength of materials. Notes for Arch. 49 and 50, College of Architecture and Design, University of Michigan. ([Lithoprinted by Edwards Brothers], 1954), by Walter Van Cleve Marshall (page images at HathiTrust)
Structural engineering (Longmans, Green, and co., 1911), by Joseph Husband and William Harby (page images at HathiTrust; US access only)
Rayleigh's principle and its applications to engineering; the theory and practice of the energy method for the approximate determination of critical loads and speeds (Dover Publications, 1956), by G. Temple and William Gee Bickley (page images at HathiTrust)
Coefficients for analysis of two and three span continuous beams of constant moment of inertia. (Muscatine, Iowa, 1961), by Stanley Engineering Company (page images at HathiTrust)
Architectural mechanics: statics; notes for Arch. 29, College of Architecture and Design, University of Michigan. ([Edwards Brothers], 1950), by Walter Van Cleve Marshall and University of Michigan. College of Architecture and Design (page images at HathiTrust)
Snubber sensitivity study (The Commission :, 1981), by A. T. Onesto, U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering, and Energy Technology Engineering Center (U.S.) (page images at HathiTrust)
Piping benchmark problems (Division of Systems Safety, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission :, 1980), by P. Bezler, Brookhaven National Laboratory. Structural Analysis Division, Brookhaven National Laboratory, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, and U.S. Nuclear Regulatory Commission. Division of Systems Safety (page images at HathiTrust)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design, with examples and problems (J. Wiley & sons; [etc., etc.], 1907), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
Reclamation, managing water in the West (U.S. Dept. of the Interior, Bureau of Reclamation ;, 2006), by United States Bureau of Reclamation (page images at HathiTrust)
Basic research into crashworthiness of vehicle structures. Technical report. (1968) (page images at HathiTrust)
Basic research in crashworthiness II - pre-collapse dynamic analysis of plane, ideal elasto-plastic frame structures including the case of collision into a narrow rigid pole obstacle. Interim technical report. (1972) (page images at HathiTrust)
The effect of vehicle structure characteristics on occupant restraint parameters. A parametric study. Technical report. (1973), by R. A. Krauss and C. Strother (page images at HathiTrust)
Structure verification of bus passenger seats. Final report. (1973), by E. L. Sittler (page images at HathiTrust)
Basic research in crashworthiness II - experimental validation study of the analytical predictive techniques for the large deflection dynamic analysis of plane elasto-plastic frame structures. Interim technical report. (1973), by R. C. Shieh (page images at HathiTrust)
Basic research in crashworthiness II - dynamic analysis of elasto-plastic space frame structures. Interim technical report. (1973), by C. Y. Sheu (page images at HathiTrust; US access only)
Basic research in crashworthiness II - large deflection computerized analysis of rate sensitive elasto-plastic frame structures. Interim technical report. (1973), by R. C. Shieh (page images at HathiTrust; US access only)
Analytical finite element simulation model for structural crashworthiness prediction. Interim report. (1974), by John N. Rossettos, Herbert Weinstock, and S. Pasternack (page images at HathiTrust)
Modular approach to structural simulation for vehicle crashworthiness prediction. Final report. (1975), by Pin Tong and John N. Rossettos (page images at HathiTrust)
Feasibility study of plastic automotive structure. Summary report. (1975), by Herbert A. Jahnle (page images at HathiTrust)
Occupant survivability in lateral collisions. Summary report. Final technical report. (1976), by James E. Greene (page images at HathiTrust)
Finite element analysis of automotive structures under crash loadings. Volume I. Summary. Final report. (1976), by R. E. Welch, R. W. Bruce, and Ted Belytschko (page images at HathiTrust)
An assessment of the crashworthiness of existing urban rail vehicles. Volume II: analyses and assessments of vehicles. Chapters 8 through 12 and appendixes and references. Final report. (1975), by R. J. Cassidy and D. J. Romeo (page images at HathiTrust)
Finite element analysis of automotive structures under crash loadings. Volume II. Technical report. Final report. (1976), by R. E. Welch, R. W. Bruce, and Ted Belytschko (page images at HathiTrust)
An assessment of the crashworthiness of existing urban rail vehicles. Volume I: analyses and assessments of vehicles. Chapters 1 through 7. Final report. (1975), by R. J. Cassidy and D. J. Romeo (page images at HathiTrust)
An assessment of the crashworthiness of existing urban rail vehicles. Volume III: train-collision model users manual. Final report. (1975), by David J. Segal (page images at HathiTrust)
Dynamic three-dimensional finite element analysis of steel transportation structures. Technical report. (1976), by J. N. Paulson, Marshall L. Silver, and Ted Belytschko (page images at HathiTrust)
Development of a unitized school bus. Volume I - summary report. Final report. (1976), by L. Adams, Anil V. Khadilkar, L. Pauls, and W. Rup (page images at HathiTrust)
Development of a unitized school bus. Volume II - technical report. Final report. (1976), by Khadilkar Adams, L. Pauls, and W. Rup (page images at HathiTrust)
Development of a unitized school bus. Volume III - appendices. Final report. (1976), by L. Adams, Anil V. Khadilkar, L. Pauls, and W. Rup (page images at HathiTrust)
Establishment of interim guidelines for bridge rails required to contain heavy vehicles. Volume 1. Statement of criteria. Final report. (1974), by J. A. Bloom, T. J. Rudd, and John J. Labra (page images at HathiTrust)
Establishment of interim guidelines for bridge rails required to contain heavy vehicles. Volume 2. Technical approach. Final report. (1974), by J. A. Bloom, T. J. Rudd, and John J. Labra (page images at HathiTrust)
Refinement of finite element analysis of automobile structures under crash loading. Volume I. Summary final report. (1977), by K. S. Yeung and R. E. Welch (page images at HathiTrust)
Refinement of finite element analysis of automobile structures under crash loading. Volume II. Final technical report. (1977), by K. S. Yeung and R. E. Welch (page images at HathiTrust)
Criteria for implementation of optimum integration algorithm into the WRECKER program. Volume 1, summary final report. (1978), by J. R. Tucker and Michael Chi (page images at HathiTrust)
Criteria for implementation of optimum integration algorithm into the WRECKER program. Technical final report. Volume II. (1978), by J. R. Tucker and Michael Chi (page images at HathiTrust)
Improved tank testing methods. (1980) (page images at HathiTrust; US access only)
Standard structural arrangements - a report of research conducted under MARAD Task S-11 of the Ship Producibility Research Program to determine the value of standard structural arrangements. (1978) (page images at HathiTrust; US access only)
Pavement performance model development: volume I - executive summary. Final report. (1985), by W. Ronald Hudson and John P. Zaniewski (page images at HathiTrust)
Pavement performance model development: volume II - final model development. Final report. (1985), by John P. Zaniewski, W. Ronald Hudson, Stephen B. Seeds, and L. Moser (page images at HathiTrust)
Static and dynamic behavior of monotube span-type sign structures. Volume I - final report. (1984), by M. R. Ehsani, S. K. Chakrabarti, and Reidar Bjorhovde (page images at HathiTrust)
Static and dynamic behavior of monotube span-type sign structures. Volume II - appendices. Final report. (1984), by M. R. Ehsani, S. K. Chakrabarti, and Reidar Bjorhovde (page images at HathiTrust)
Bridge safety: structural soundness of the Zilwaukee Bridge. (1988) (page images at HathiTrust)
Rigid pavement analysis and design. Final report-Phase I. (1989), by K. W. Heinrichs, M. J. Liu, Michael I. Darter, Samuel H. Carpenter, and Anastasios M. Ioannides (page images at HathiTrust)
Essentials in the theory of framed structures (McGraw-Hill Book Company, inc., 1922), by Charles Alton Ellis (page images at HathiTrust)
Elementary structural analysis (McGraw-Hill Book Co., 1948), by John Benson Wilbur and Charles Head Norris (page images at HathiTrust)
Structural mechanics : comprising the strength and resistance of materials and elements of structural design, with examples and problems (John Wiley & sons ;, 1905), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust; US access only)
Examples in applied mechanics and elementary theory of structures. (University Press, 1911), by Charles Edward Inglis (page images at HathiTrust)
The principles of structural mechanics : treated without the use of higher mathematics. (Batsford, 1912), by Percy J. Waldram (page images at HathiTrust)
Columns and struts : theory and practical design with examples worked out (E.& F.N. Spon, 1912), by William Alexander (page images at HathiTrust; US access only)
Die neueren Methoden der Festigkeitslehre und der Statik der Baukonstruktionen, ausgehend vom dem Gesetze der virtuellen Verschiebungen und den Lehrsätzen über die Formänderungsarbeit (Baumgärtner, 1893), by Heinrich F. B. Müller-Breslau (page images at HathiTrust)
Elasticity, structure and strength of materials used in engineering construction; developed by the geometry of strain and the energy function thru thermodynamic and chemical equations in such wise that strength may be figured from chemical composition of rolled metals and the modification of this resistance by mechanical work. (Minneapolis, Minn., 1934), by Claude Allen Porter Turner (page images at HathiTrust)
Structural mechanics : a handbook for engineers, architects, and students (G. Bell & Sons, 1890), by R. M. Parkinson (page images at HathiTrust)
Engineering review; structural steel and reinforced concrete (Cord publishers, 1940), by Charles Kandall (page images at HathiTrust)
Substructure analysis and design. (Irwin-Farnham Pub. Co., 1948), by Paul Andersen (page images at HathiTrust)
The design of structures: a practical treatise on the building of bridges, roofs, &c. (C. Griffin and company, limited, 1891), by S. Anglin (page images at HathiTrust)
Theory of structures and strength of materials (J. Wiley & Sons; [etc., etc.], 1905), by Henry Taylor Bovey (page images at HathiTrust)
Elastic stresses in structures. (Scott, Greenwood, 1919), by Alberto Castigliano and Ewart S. Andrews (page images at HathiTrust; US access only)
Structural planning and design; solutions to problems in examinations for professional engineers given by the New York State board of examiners of professional engineers and land surveyors, the University of the State of New York. (Printed by Detroy press, inc.], 1941), by William Glendinning and New York (State). State Board of Examiners of Professional Engineers and Land Surveyors (page images at HathiTrust)
Structural frameworks; a new method of analysis, with tables (The University of North Carolina Press, 1934), by Thomas Felix Hickerson (page images at HathiTrust)
A text-book on roofs and bridges (J. Wiley & Sons, 1891), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
Elements of structural engineering (International Textbook Company, 1938), by Edward Slater Sheiry (page images at HathiTrust)
The theory of structures (McGraw-Hill book company, 1911), by Charles M. Spofford (page images at HathiTrust)
Structural engineering; stresses, graphical statics and masonry (McGraw-Hill Book Co., 1927), by George Fillmore Swain (page images at HathiTrust)
Structural design (Constable & Co., 1912), by Horace R. Thayer (page images at HathiTrust; US access only)
Theory of structures (Longmans, Green, 1912), by Arthur Morley (page images at HathiTrust; US access only)
A text-book on roofs and bridges (J. Wiley & Sons, 1897), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
A text-book on roofs and bridges (J. Wiley & Sons, 1903), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
A text-book on roofs and bridges. (J. Wiley, 1912), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust; US access only)
Statically indeterminate structures (Edwards Brothers, inc., 1939), by Fred L. Plummer (page images at HathiTrust)
Fundamentals of indeterminate structures (Pitman Pub. Corp., 1944), by Fred L. Plummer (page images at HathiTrust)
Elementary structural engineering (McGraw-Hill book company, inc., 1941), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust; US access only)
Analysis of statically indeterminate structures (International textbook co., 1943), by Clifford David Williams (page images at HathiTrust)
Analysis of statically indeterminate structures. (International Textbook Co., 1951), by Clifford David Williams (page images at HathiTrust)
Structural analysis laboratory research. ([Cambridge, Mass.], 1938), by Massachusetts Institute of Technology. Department of Civil Engineering (page images at HathiTrust; US access only)
The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice (Wiley, 1914), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
Stresses in framed structures (McGraw-Hill Book Company, inc., 1923), by George Albert Hool and W. S. Kinne (page images at HathiTrust)
The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice. (J. Wiley & sons, 1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
Modern framed structures (Wiley & Sons ;, 1903), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
Modern framed structures (Wiley & Sons ;, 1926), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
The theory and practice of modern framed structures ; designed for the use of schools and for engineers in professional practice (J. Wiley, 1929), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
Stresses in framed structures (McGraw-Hill Book Company, inc., 1942), by George Albert Hool, George Campbell Ernst, Roy Richard Zipprodt, and W. S. Kinne (page images at HathiTrust; US access only)
Mechanics ; Soils ; Masonry ; Retaining walls ; Arches (International Textbook Co., 1904), by International Correspondence Schools (page images at HathiTrust)
Theory of prestressed concrete (Prentice-Hall, 1963), by Michael Chi and Frank A. Biberstein (page images at HathiTrust)
Structural analysis and design. ([s.n.], 1950), by Joseph Sterling Kinney (page images at HathiTrust)
Stress analysis applied to underground mining problems (U.S. Dept. of the Interior, Bureau of Mines, 1948), by Wilbur I. Duvall (page images at HathiTrust)
Distribution of lateral forces in small buildings (Briggs Pub. Co., 1955), by Lawrence A. Briggs (page images at HathiTrust)
Elementary structural mechanics. (Prentice-Hall, 1963), by Tung Au (page images at HathiTrust)
Fundamentals of statically indeterminate structures. (Ronald Press Co., 1957), by Carl Louis Shermer (page images at HathiTrust)
Kurs statiki sooruzheniĭ. Chastʹ I (Kubuch, 1926), by Stephen Timoshenko (page images at HathiTrust; US access only)
Practical design of structural members. (J. S. Swift Co; distributed by Technical Book Co., 1954), by Thomas A 1885- Lucy (page images at HathiTrust)
Stress analysis applied to underground mining problems. part II, stress analysis applied to multiple openings and pillars (U.S. Dept. of the Interior, Bureau of Mines, 1948), by Wilbur I. Duvall (page images at HathiTrust)
Statik der Hochbaukonstruktionen (C. Scholtze, W. Junghans, 1910), by Walther Knapp (page images at HathiTrust; US access only)
Die statik der bauwerke ... (W. Ernst, 1921), by Rudolf Kirchhoff (page images at HathiTrust; US access only)
Moment distribution; a rapid method of analysis for rigid-jointed structures. (Wiley, 1961), by Edgar Lightfoot (page images at HathiTrust)
Cálculo de estructuras. (Tejada y Martin, 1915), by Juan Manuel de Zafra (page images at HathiTrust; US access only)
Die statisch unbestimmten Systeme des Eisen- und Eisenbetonbaues, berechnet aus der Formänderungsarbeit und aus den Formänderungen selbst. (W. Ernst & Sohn, 1913), by Friedrich Hartmann (page images at HathiTrust; US access only)
Structural members and connections (McGraw-Hill Book, 1943), by George A. Hool and W. S. Kinne (page images at HathiTrust; US access only)
The calculations for steel-frame structures : designed to comply with the requirements of the London County Council (General Powers) Act, 1909 ... / by Walter Cyril Cocking. (Scott, Greenwood, 1925), by Walter Cyril Cocking (page images at HathiTrust; US access only)
Theorie der elastigen Bogenträger. (T. Ackermann, 1879), by Jakob Johann Weyrauch (page images at HathiTrust)
Theory of structures and strength of materials (J. Wiley & sons, 1900), by Henry Taylor Bovey (page images at HathiTrust)
Theory and practice in designing (D. Van Nostrand company, 1911), by Henry Adams (page images at HathiTrust; US access only)
Festigkeitslehre für baugewerkschulen und verwandte gewerbliche lehranstalten soure zum gebrauch in der bautechnischen praxis (Seemann & Co., 1903), by Heinrich Seipp (page images at HathiTrust; US access only)
Structural problems, part II (Engineering Society of the University of Toronto, 1921), by Clarence Richard Young (page images at HathiTrust)
Calcul des constructions hyperstatiques, application d'une methode trés simple ... (Dunod, 1927), by J. Rieger and P. Carot (page images at HathiTrust; US access only)
Standard specifications for structural steel, timber, concrete and reinforced concrete. (McGraw-Hill, 1910), by John C. Ostrup (page images at HathiTrust)
Practical structural design in timber, steel and concrete; a text and reference work for engineers, architects, builders, draftsmen and technical schools; especially adapted to the needs of self-tutored men (Scientific Book Corporation, 1926), by Ernest McCullough (page images at HathiTrust)
Structural engineering (The Myron C. Clark publishing co.; [etc., etc.], 1914), by John Edward Kirkham (page images at HathiTrust)
Structural design (D. Van Nostrand Company, 1912), by Horace R. Thayer (page images at HathiTrust)
The principles of structural design (W. & J. Mackay & Co. [for] the Royal Engineers Institute, 1897), by G. K. Scott-Moncrieff (page images at HathiTrust)
Contribution à l'étude des méthodes nouvelles de la statique des constructions... (Gauthier-Villars, 1913), by Ernest Flamard (page images at HathiTrust; US access only)
Structural mechanics (McGraw-Hill, 1932), by Harrison W. Hayward, Ralph G. Adams, Addison Francis Holmes, and Lowell Institute School for Industrial Foremen (page images at HathiTrust)
Structural engineering (Longmans, Green, 1924), by Joseph Husband and William Harby (page images at HathiTrust; US access only)
Framed structures and girders, theory and practice ... (McGraw-Hill Book Company, 1911), by Edgar Marburg (page images at HathiTrust; US access only)
Analysis of framed structures (McGraw-Hill Book Company, 1935), by John Horace Matthews and Phillip Ervin Soneson (page images at HathiTrust; US access only)
Theory of structures; a textbook covering the syllabuses of the B. Sc. (Eng.) A. M. Inst. C. E. and A. M. I. Mech. E. and A. M. I. Struct. E. examinations in this subject (Pitman, 1925), by Harold Wilberforce Coultas (page images at HathiTrust; US access only)
Théorie des charpentes, donnant des règles pratiques pour la construction des fermes et autres appareils en bois ou en fonte. (Imprimé par E. Thunot, 1851), by Victor Hippolyte Fabré (page images at HathiTrust)
Filosofía de las estructuras; filiación racional de las formas resistentes empleadas en la ingeniería y en la arquitectura histórica y moderna, síntesis de sus procedimientos verificativos, origen, planteo y generalización de los principios estructurales, reflexiones conducentes à la obtención de mievas estructuras. (A. Bosch, 1910), by Félix Cardellach (page images at HathiTrust; US access only)
Quantification of building seismic performance factors (U.S. Dept. of Homeland Security, FEMA, 2009), by United States Federal Emergency Management Agency and Applied Technology Council (page images at HathiTrust)
Practical structural design; a text and reference work for engineers, architects, builders, draftsmen and technical schools; especially adapted to the needs of self-tutored men (U. P. C. Book Co., 1917), by Ernest McCullough (page images at HathiTrust)
Theory of structures and strength of materials (Wiley, 1896), by Henry T. Bovey (page images at HathiTrust)
Analysis of simply supported grids of perpendicular beams (Oak Ridge National Laboratory, 1964), by F. J. Witt, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
Prestressing a two-layer pressure vessel by controlled yielding of the inner layer (Oak Ridge National Laboratory, 1964), by R. W. Schneider, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Inspection Engineering Department (page images at HathiTrust)
Prestressing a two-layer pressure vessel by controlled yielding of the inner layer (Oak Ridge National Laboratory, 1964), by R. W. Schneider, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Inspection Engineering Department (page images at HathiTrust)
A textbook on roofs and bridges ... (J. Wiley & sons; [etc., etc.], 1890), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust; US access only)
A text-book on roofs and bridges ... (John Wiley & Sons;, 1901), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust; US access only)
A text-book on roofs and bridges (Wiley, 1902), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
A text-book on roofs and bridges (John Wiley ;, 1920), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust; US access only)
Texas Tower oceanographic observational program : spring and summer 1956 (U.S. Navy Hydrographic Office, 1956), by Quick H Carlson and United States. Hydrographic Office (page images at HathiTrust)
Théorie de l'équilibre des systèmes élastiques et ses applications (A.F. Negro, 1879), by Alberto Castigliano (page images at HathiTrust)
Introduction aux cours de construction...1854-55. (1800), by Madeleine Cavalier (page images at HathiTrust; US access only)
Lectures on the elements of applied mechanics, comprising I. Stability of structures; II. Strength of materials. Printed for the use of the Royal Military Academy. (Hodgson, 1877), by Morgan William Crofton (page images at HathiTrust)
Improved equivalent linearization implementations using nonlinear stiffness evaluation (National Aeronautics and Space Administration, Langley Research Center, 2001), by Stephen A. Rizzi, Alexander A. Muravyov, and Langley Research Center (page images at HathiTrust)
Moments sur les appuis des poutres continues, dont le moment d'inertie est constant et dont les travées intermédiaires ont la même portée : lignes d'influence des déformations élastiques des poutres à réactions verticales subdivisées en mailles d'égales longueur. (Unione typografico-editrice torinese, 1911), by J. Röthlisberger (page images at HathiTrust; US access only)
Die berechnung der rahmenträger, mit besonderer rücksicht auf die anwendung (W. Ernst & sohn, 1919), by Fr. Engesser (page images at HathiTrust; US access only)
The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1895), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1894), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
Der rahmen; ein faches verfahren zur berechnung von rahmen aus eisen und eisenbeton mit ausgeführten beispielen (W. Ernst & sohn, 1919), by W. Gehler (page images at HathiTrust; US access only)
A text-book on roofs and bridges (J. Wiley, 1888), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
A study of matrix analysis methods for inelastic structures. Project no. 1467, Task no. 146701, prepared under Contract no. AF 33 (657)-8717 by Massachusetts Institute of Technology, Aeroelastic and Structures Research Laboratory. (AF Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, 1963), by John H. Percy, D. K. Navaratna, William A. Loden, and Massachusetts Institute of Technology. Aeroelastic and Structures Research Laboratory (page images at HathiTrust)
Behavior of a bi-material cylinder, including the effects of fracture (University of New Mexico, Bureau of Engineering Research], 1969), by Roy L. Johnson (page images at HathiTrust; US access only)
Distribution of lateral forces in small buildings (Briggs Pub. Co., 1952), by Lawrence A. Briggs (page images at HathiTrust; US access only)
Theory of statically indeterminate structures (McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
Architectural mechanics; strength of materials. (Ann Arbor, 1949), by Walter Van Cleve Marshall (page images at HathiTrust; US access only)
Structural theory (J. Wiley & Sons, Inc;, 1935), by Hale Sutherland and Harry Lake Bowman (page images at HathiTrust; US access only)
NASTRAN user's manual. (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1970), by United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust; US access only)
Earthquake-simulation tests of a ten-story reinforced concrete frame with a discontinued first-level beam (University of Illinois, 1978), by Jack P Moehle and Mete Avni Sozen (page images at HathiTrust)
Strength and elasticity of structural members (E. Arnold, 1908), by Richard John Woods (page images at HathiTrust; US access only)
The NASTRAN theoretical manual. (Scientific and Technical Information Office, National Aeronautics and Space Administration ;, 1970), by United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust; US access only)
The elastic pole. (Lockheed Aircraft Corporation, 1952), by Alf Fridtjof Ensrud (page images at HathiTrust)
Buckling of a continuous beam-column on elastic supports. (Pennsylvania State College, 1951), by Edward C. Holt and Column Research Council (U.S.) (page images at HathiTrust)
Residual stress and the yield strength of steel beams (Lehigh University, Department of Civil Engineering and Mechanics. Fritz Engineering Laboratory, 1951), by Ching Huan Yang and Welding Research Council (U.S.) (page images at HathiTrust)
Structural analysis. (International Textbook Co., 1960), by Jack C. McCormac (page images at HathiTrust)
Moment distribution. (Van Nostrand, 1963), by James M. Gere (page images at HathiTrust; US access only)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design (J. Wiley & sons; [etc., etc.], 1905), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
A study of the parameters associated with employing laser speckle correlation fringes to measure in-plane strain (Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1972), by Frank D. Adams and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
Space station structures and dynamics test program (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1987), by Carleton J. Moore, Edward W. Ivey, John S. Townsend, and George C. Marshall Space Flight Center. Structures and Dynamics Laboratory (page images at HathiTrust)
Derivation of a tapered p-version beam finite element (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Howard E. Hinnant and Langley Research Center. Aerostructures Directorate (page images at HathiTrust)
Thermal-distortion analysis of an antenna strongback for geostationary high-frequency microwave applications (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Jeffery T. Farmer, Robert L. Wright, Deborah M. Wahls, and Langley Research Center (page images at HathiTrust)
Thermal-distortion analysis of a spacecraft box truss in geostationary orbit (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Patrick A. Cosgrove, Lawrence F. Rowell, Jeffery T. Farmer, and Langley Research Center (page images at HathiTrust)
A Three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program ;, 1991), by Karen F. Bartos and Lewis Research Center (page images at HathiTrust)
Buckling and vibration analysis of a simply supported column with a piecewise constant cross section (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by Mark S. Lake, Martin M. Mikulas, and Langley Research Center (page images at HathiTrust)
On-orbit structural dynamic performance of a 15-meter microwave radiometer antenna (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by Deborah M. Wahls, David W. Sleight, Jeffery T. Farmer, and Langley Research Center (page images at HathiTrust)
Finite-element-analysis model and preliminary ground testing of Controls-Structures Interaction Evolutionary Model reflector (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Mercedes C. Reaves, James P. Bailey, W. Keith Belvin, and Langley Research Center (page images at HathiTrust)
Structural characterization of a first-generation articulated-truss joint for space crane application (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Thomas R. Sutter and Langley Research Center (page images at HathiTrust)
Structural analysis of three space crane articulated-truss joint concepts (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by K. Chauncey Wu, Thomas R. Sutter, and Langley Research Center (page images at HathiTrust)
Development of a simplified procedure for cyclic structural analysis (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Albert Kaufman and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Modal analysis of a nonuniform string with end mass and variable tension (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by M. Rheinfurth, Zachary J. Galaboff, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Simplified method for nonlinear structural analysis (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1983), by Albert Kaufman and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by K. N. Shivakumar, J. C. Newman, and Langley Research Center (page images at HathiTrust)
Improved accuracy for finite element structural analysis via a new integrated force method (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Surya N. Patnaik and Lewis Research Center (page images at HathiTrust)
Computational aspects of sensitivity calculations in linear transient structural analysis (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by William H. Greene and Langley Research Center (page images at HathiTrust)
Analytical and photogrammetric characterization of a planar tetrahedral truss (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by K. Chauncey Wu, Marvin D. Rhodes, Richard R. Adams, and Langley Research Center (page images at HathiTrust)
Axisymmetric shell analysis of the space shuttle solid rocket booster field joint (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by Michael P. Nemeth, Melvin S. Anderson, and Langley Research Center (page images at HathiTrust)
Stiffness and strength tailoring in uniform space-filling truss structures (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by Mark S. Lake and Langley Research Center (page images at HathiTrust)
Structural behavior of composite materials (National Aeronautics and Space Administration :, 1964), by Stephen W. Tsai and United States National Aeronautics and Space Administration (page images at HathiTrust)
Control of the meteoroid hazard to space vehicles (National Aeronautics and Space Administration, 1964), by Philip J. D'Anna, James J. Piechocki, Roger M. Heitz, Northrop Space Laboratories, and United States National Aeronautics and Space Administration (page images at HathiTrust)
A triangular thin shell finite element : linear analysis (National Aeronautics and Space Administration ;, 1975), by G. R. Thomas, Richard H. Gallagher, Langley Research Center, and Cornell University (page images at HathiTrust)
A triangular thin shell finite element : nonlinear analysis (National Aeronautics and Space Administration ;, 1975), by G. R. Thomas, Richard H. Gallagher, Langley Research Center, and Cornell University (page images at HathiTrust)
Some inconsistencies of the finite element method as applied to inelastic response (National Aeronautics and Space Administration ;, 1977), by Manobar P. Kamat, Douglas E. Killian, and United States National Aeronautics and Space Administration (page images at HathiTrust)
A digital computer study of the buckling of shallow spherical caps and truncated hemispheres (National Aeronautics and Space Administration ;, 1972), by William C. Stilwell, Robert E. Ball, Langley Research Center, and Naval Postgraduate School (U.S.) (page images at HathiTrust)
Scatter factor and reliability of aircraft structures (National Aeronautics and Space Administration ;, 1972), by Gerhart I. Schuëller, Alfred Martin Freudenthal, Langley Research Center, and George Washington University (page images at HathiTrust)
Feasibility study of shell buckling analysis using the modified structure method (National Aeronautics and Space Administration ;, 1972), by Gerald A. Cohen, Raphael T. Haftka, Langley Research Center, and Structures Research Associates (page images at HathiTrust)
A method of limit point calculation in finite element structural analysis (National Aeronautics and Space Administration ;, 1972), by Richard H. Gallagher, S. T. Mau, Langley Research Center, and Cornell University (page images at HathiTrust)
A new matrix theorem and its application for establishing independent coordinates for complex dynamical systems with constraints (National Aeronautics and Space Administration, 1969), by William C. Walton, Earl C. Steeves, and Langley Research Center (page images at HathiTrust; US access only)
Nonlinear modeling of joint dominated structures (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by J. C. Chapman, Langley Research Center, and Boeing Aerospace Company. Engineering Technology (page images at HathiTrust)
NASA TN D-3466 (National Aeronautics and Space Administration ;, 1966), by W. B. Fichter, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
Fracture analysis of surface and through cracks in cylindrical pressure vessels (National Aeronautics and Space Administration :, 1976), by J. C. Newman and United States National Aeronautics and Space Administration (page images at HathiTrust)
NASA TN D-5771 (National Aeronautics and Space Administration :, 1970), by Larry L. Erickson, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-6146 (National Aeronautics and Space Administration ;, 1971), by C. C. Chamis, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-1872 (National Aeronautics and Space Administration, 1963), by Richard H. Lyon, Beranek Bolt, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-1690 (National Aeronautics and Space Administration, 1962), by H. U. Schuerch, G. M. Schindler, Astro Research Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
The use of higher-order difference methods in beam vibration analysis (National Aeronautics and Space Administration, 1961), by Donald T. Greenwood, United States National Aeronautics and Space Administration, and University of Michigan. Dept. of Aeronautical and Astronautical Engineering (page images at HathiTrust)
Analysis of the three-point-bend test for materials with unequal tension and compression properties (National Aeronautics and Space Administration ;, 1974), by C. C. Chamis and Lewis Research Center (page images at HathiTrust)
New triangular and quadrilateral plate-bending finite elements (National Aeronautics and Space Administration ;, 1974), by R. Narayanaswami and Langley Research Center (page images at HathiTrust)
NASA TN D-6326 (National Aeronautics and Space Administration ;, 1971), by Roy Leon Courtney, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-6588 (National Aeronautics and Space Administration :, 1972), by C. C. Chamis, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Further problems in the theory and design of structures ... (Chapman & Hall, 1913), by Ewart S. Andrews (page images at HathiTrust; US access only)
The principles of structural mechanics treated without the use of higher mathematics (B. T. Bastford, 1912), by Percy J. Waldram (page images at HathiTrust; US access only)
The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice (J. Wiley & sons, 1901), by J. B. Johnson, F. E. Turneaure, and Chales Walter Bryan (page images at HathiTrust)
A text-book on roofs and bridges. (J. Wiley, 1913), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust; US access only)
Structural engineering (Cassell and Company, ltd., 1913), by Arthur William Brightmore (page images at HathiTrust)
The mechanics of building construction (Longmans, Green, and co., 1912), by Henry Adams (page images at HathiTrust)
The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings (J. Wiley, 1888), by Jay Du Bois (page images at HathiTrust)
The theory and design of structures; a textbook for the use of students, draughtsmen, and engineers engaged in constructural work. (Chapman & Hall, 1910), by Ewart S. Andrews (page images at HathiTrust; US access only)
A text-book on roofs and bridges : pt. 1- (J. Wiley & Sons, 1905), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
The Design of structues : a practical treatise on the building of bridges, roofs, &c. (Griffin, 1905), by S. Anglin (page images at HathiTrust; US access only)
The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (J. Wiley & sons, 1893), by A. Jay Du Bois (page images at HathiTrust)
The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (Wiley, 1891), by A. Jay Du Bois (page images at HathiTrust)
Structural problems ... (Engineering Society of the University of Toronto, 1922), by C. R. Young (page images at HathiTrust)
A structural-efficiency evaluation of titanium at normal and elevated temperatures (National Advisory Committee for Aeronautics, 1951), by George J. Heimerl, Paul F. Barrett, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
A text-book on roofs and bridges (J. Wiley, 1891), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
The strains in framed structures with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings (Wiley, 1892), by A. Jay Du Bois (page images at HathiTrust)
The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley & Sons, 1897), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
Structural problems. Part I (Engineering Society of the University of Toronto, 1920), by C. R. Young (page images at HathiTrust; US access only)
A text-book of roofs and bridges (Wiley, 1894), by Mansfield Merriman, Henry Sylvester Jacoby, and Henry Sylvester Jacoby (page images at HathiTrust)
Experimental and predicted lateral-directional dynamic-response characteristics of a large flexible 35 degree swept-wing airplane at an altitude of 35,000 feet (National Advisory Committee for Aeronautics, 1956), by Stuart C. Brown, Euclid C. Holleman, and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
Thermal stress analysis of finite sections (General Electric, Aircraft Nuclear Propulsion Dept., Atomic Products Division, 1959), by Arthur L. Ross and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
The strains in framed structures, with numerous applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and drawn spans, continuous girders, etc. Also, determination of dimensions and designing of details. (J. Wiley, 1890), by A. Jay Du Bois (page images at HathiTrust)
The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice (J. Wiley, 1899), by J. B. Johnson, C. W. Bryan, and F. E. Turneaure (page images at HathiTrust)
Expansion of structures by heat. (Crosby Lockwood, 1887), by John Keily (page images at HathiTrust)
Die Baumechanik. (C. Scholtze, 1876), by W. Jeep (page images at HathiTrust)
Nonlinear, incremental structural analysis of Olmsted Locks and Dams. volume I, Main text (U.S. Army Engineer Waterways Experiment Station ;, 1992), by Sharon Garner, C. Dean Norman, Anthony A. Bombich, U.S. Army Engineer Waterways Experiment Station, and United States. Army. Corps of Engineers. Louisville District (page images at HathiTrust)
Nonlinear, incremental structural analysis of Olmsted Locks and Dams. volume II, Appendixes A through I (U.S. Army Engineer Waterways Experiment Station ;, 1992), by Sharon Garner, C. Dean Norman, Anthony A. Bombich, U.S. Army Engineer Waterways Experiment Station, and United States. Army. Corps of Engineers. Louisville District (page images at HathiTrust)
Die Baumechanik : ein Lehr- und Handbuch für Bauschulen ... (Baumgärtners, 1884), by Julius Wenck (page images at HathiTrust)
Determination of end reactions for helicoidal girders and slabs fixed at the supports (1957), by Yee Fong Young (page images at HathiTrust; US access only)
Statically indeterminate structures and the principle of least work. (Offices of "Engineering", 1895), by Harold Medway Martin (page images at HathiTrust)
The theory and design of structures; atext-book for the use of students, draughts-men, and engineers engaged in constructional work, with numerous illustrations and worked examples. (Chapman & Hall, 1913), by Ewart S. Andrews (page images at HathiTrust; US access only)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design, with examples and problems (J. Wiley & Sons; [etc.,etc.], 1897), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
Good buildings and bad : basics of earthquake vulnerability. (Illinois Emergency Management Agency, [1992], 1992), by Illinois. Emergency Management Agency (page images at HathiTrust)
American standard letter symbols for structural analysis (The American Society of Mechanical Engineers, 1949), by Z10 American Standards Association. Sectional Committee on Letter Symbols and Abbreviations for Science and Engineering and American Society of Mechanical Engineers (page images at HathiTrust; US access only)
The analysis of the Lansing State Savings Bank building (1918), by Morris A. Harkavy and Russell Vivian Perry (page images at HathiTrust; US access only)
Computer program with interactive graphics for analysis of plane frame structures (CFRAME) (Waterways Experiment Station ;, 1979), by Joseph P. Hartman, John J. Jobst, United States. Army. Corps of Engineers. St. Louis District, and United States Army Corps of Engineers (page images at HathiTrust)
An evaluation of time-dependent, materials information for purposes of pressure vessel design and analysis : final report-phase I, task II (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1960., 1960), by L. U. Rastrelli, U.S. Atomic Energy Commission. New York Operations Office, and Southwest Research Institute (page images at HathiTrust)
Stress analysis of circular semimonocoque cylinders with cutouts by a perturbation load technique (National Advisory Committee for Aeronautics, 1954), by Harvey G. McComb and United States National Advisory Committee for Aeronautics (page images at HathiTrust)
A numerical solution for plate bending problems (Available from the Office of Technical Services, Dept. of Commerce, 1963), by D. S. Griffin, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
Inelastic deflection and buckling of fuel plates due to fluid velocity and compressive edge loads (Washington, D.C. : Office of Technical Services, Department of Commerce, 1962., 1962), by D. S. Griffin, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
Seal-shell-2 : a computer program for the stress analysis of a thick shell of revolution with axisymmetric pressures, temperatures, and distributed loads (Washington, D.C. : Office of Technical Services, Department of Commerce, 1963., 1963), by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
Structure design notes : calculation of stresses, forces, and deflections in linear-elastic skeleton structures with temperature, pressures, applied loads and redundant loads (Washington, D.C. : Office of Technical Services, Department of Commerce, 1964., 1964), by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
Structures, models, and architects : a seminar in structural model analysis for architectural students (Princeton University, School of Architecture, 1963), by David P. Billington, Robert Mark, and Jack R. Janney (page images at HathiTrust; US access only)
Proceedings. (University of Florida., 1950), by Structural Engineering Conference (University of Florida) (page images at HathiTrust; US access only)
Vibration tests of the Encino dam intake tower (Pasadena, 1961), by Willard Otis Keightley, Donald E. Hudson, and G. W. Housner (page images at HathiTrust; US access only)
Certification methodology for stiffener terminations (Federal Aviation Administration, Office of Aviation Research ;, 1996), by C. H. Shah, M. Mahler, H. P. Kan, Northrop Corporation. Military Aircraft Division, Langley Research Center, and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
Deflections of a simply-supported L-shaped plate under a uniform normal load (Washington D. C. : Mathematics Division, Office of Scientific Research, U.S. Air Force, 1954., 1954), by D. L. Holl, H. J. Weiss, Iowa State College, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
Vibration and stability problems of beams treated by matrices (Washington D. C. : Mathematics Division, Office of Scientific Research, U.S. Air Force, 1954., 1954), by K. Marguerre, Mo.) Washington University (Saint Louis, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
Structural mechanics; comprising the strength and resistance of materials and elements of structural design (J. Wiley & sons; [etc., etc.], 1905), by Charles E. Greene and Albert Emerson Greene (page images at HathiTrust)
Preliminary design of wings. Volume III, Minimum weight design of stiffened plate (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by Harold Switzky, Air Force Flight Dynamics Laboratory (U.S.), and Fairchild Republic Company (page images at HathiTrust)
Approximate multiple configuration analysis and allocation for least weight structural design (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Research and Technology Division, Air Force Systems Command, United States Air Force, 1967., 1967), by Robert J. Melosh, R. Luik, and Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
Finite element thermal-structural analysis of cable-stiffened space structures (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1984., 1984), by Earl A. Thornton, Ajay K. Pandey, Pramote Dechaumphai, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, and Old Dominion University. Department of Mechanical Engineering and Mechanics (page images at HathiTrust)
Preliminary design of wings. Volume IV, Minimum weight design of composite structure (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by Harold Switzky, Air Force Flight Dynamics Laboratory (U.S.), and Fairchild Republic Company (page images at HathiTrust)
Preliminary design of wings. Volume I, Design philosophy (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by Harold Switzky, Air Force Flight Dynamics Laboratory (U.S.), and Fairchild Republic Company (page images at HathiTrust)
Handbook of force management methods (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1981., 1981), by A. P. Berens, D. J. White, C. E. Larson, R. L. Johnson, J. C. Davis, K. E. Brown, D. S. Morcock, Air Force Flight Dynamics Laboratory (U.S.), Air Force Wright Aeronautical Laboratories, Vought Corporation, Lockheed-Georgia Company, and University of Dayton. Research Institute (page images at HathiTrust)
Developments in structural analysis and synthesis by function minimization (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1971., 1971), by Lucien A. Schmit, Air Force Flight Dynamics Laboratory (U.S.), and Case Western Reserve University (page images at HathiTrust)
Preliminary design of wings. Volume II, Preliminary fatigue design (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, 1974., 1974), by Harold Switzky, Air Force Flight Dynamics Laboratory (U.S.), and Fairchild Republic Company (page images at HathiTrust)
An assessment of current capability for computer analysis of shell structures (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1971., 1971), by Richard F. Hartung, Air Force Flight Dynamics Laboratory (U.S.), and Lockheed Palo Alto Research Laboratory (page images at HathiTrust)
Collapse analysis for shells of general shape. Volume 1, Analysis (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1972., 1972), by Bo O. Almroth, M. B. Marlowe, F. A. Brogan, Air Force Flight Dynamics Laboratory (U.S.), and Lockheed Palo Alto Research Laboratory (page images at HathiTrust)
Collapse analysis for shells of general shape. Volume 2. User's manual for the STAG-A computer code (Wright-Patterson Air Force Base, Ohio : Air Force Flight Dynamics Laboratory, Air Force Systems Command, United States Air Force, 1973., 1973), by Bo O. Almroth, H. T. Petersen, F. Zele, E. Meller, F. A. Brogan, Air Force Flight Dynamics Laboratory (U.S.), and Lockheed Palo Alto Research Laboratory (page images at HathiTrust)
Automated structural optimization system (ASTROS). Volume III, Applications manual (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, United States Air Force, 1988., 1988), by E. H. Johnson, D. J. Neill, Air Force Wright Aeronautical Laboratories, Air Force Flight Dynamics Laboratory (U.S.), and Northrop Corporation. Aircraft Division (page images at HathiTrust)
Der rahmen; ein hilfsbuch zur berechnung von rahmen aus eisen und eisenbeton mit ausgeführten beispielen (W. Ernst & Sohn, 1925), by W. Gehler (page images at HathiTrust; US access only)
Reinforced brick masonry project. ([Los Angeles], 1956), by Los Angeles. College of Engineering University of California (page images at HathiTrust; US access only)
The design of simple structures. (Champaign, Illinois : Stipes Publishing Co., [1955], 1955), by Edmund F. Toth (page images at HathiTrust; US access only)

More items available under broader and related terms at left.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.