The Online Books Page

Plastics

See also what's at Wikipedia, your library, or elsewhere.

Broader terms:

Related terms:

Narrower terms:

Used for:

Plastic materials
Plastic products

Filed under: Plastics

Plastics: projects and procedures with polyesters. (Bruce Pub. Co., 1962), by Alexander Frederick Bick (page images at HathiTrust)
Chemicals for industry. (Rohm & Haas, 1959), by Rohm and Haas Company (page images at HathiTrust)
An analysis of accident data from plastic pipe natural gas distribution systems (The Board, 1980), by United States. National Transportation Safety Board (page images at HathiTrust)
Chemicals for industry. (Rohm & Haas company, 1945), by Rohm and Haas Company (page images at HathiTrust)
Plastische massen; die erzeugung (S. Hirzel, 1924), by Hans Blücher (page images at HathiTrust)
High-temperature plastics (Reinhold, 1962), by Walter Brenner (page images at HathiTrust)
Plastics in engineering (Penton publishing company, 1940), by John Delmonte (page images at HathiTrust)
Plastics, a simplified presentation of the important plastics materials and products with tables of their properties and the basic design information required by engineers and designers (American Technical Society, 1945), by J. Harry DuBois and American Technical Society (page images at HathiTrust)
Making things of plastic. (C. A. Bennett, 1954), by Lauton Edwards (page images at HathiTrust)
Structural plastics (McGraw-Hill, 1950), by Harry Charles Engel (page images at HathiTrust)
Plastics, scientific and technological (Chemical publishing co., inc., 1945), by Harry Ronald Fleck and Carl F. Massopust (page images at HathiTrust)
Plastics; problems and processes (International Textbook Company, 1938), by Dale E. Mansperger and Carson W. Pepper (page images at HathiTrust)
Metallizing of plastics. (Reinhold Pub. Corp., 1960), by Harold Narcus (page images at HathiTrust)
Handbook of plastics (D. Van Nostrand Co., 1949), by Herbert R. Simonds, M. H. Bigelow, and Archie J. Weith (page images at HathiTrust)
Source book of the new plastics. (Reinhold Pub. Corp., 1959), by Herbert R. Simonds (page images at HathiTrust)
Report of the United States Tariff commission to the President of the United States under the provisions of section 316 of title III of the Tariff act of 1922. (U. S. Govt. print. off., 1928), by United States Tariff Commission (page images at HathiTrust)
Synthetic resins and their raw materials. A survey of the types and uses of synthetic resins, the organization of the industry, and the trade in resins and raw materials, with particular reference to factors essential to tariff consideration. (U. S. Govt. print. off., 1938), by United States Tariff Commission (page images at HathiTrust)
Plastics; theory and practice; the technology of high polymers (McGraw-Hill, 1947), by Charles Calvert Winding and Rudolph Leonard Hasche (page images at HathiTrust)
Plastic molding, a comprehensive study (Chemical publishing co., inc., 1941), by Denis A. Dearle (page images at HathiTrust)
Molding, Plastic (McGraw-Hill Book Company, Inc., 1933), by Louis F. Rahm (page images at HathiTrust)
Plastics mold, design, construction, use ([Huebner publications], 1946), by Gordon B. Thayer (page images at HathiTrust)
Fibres, plastics, and rubbers; a handbook of common polymers. (Academic Press, 1956), by W. J. Roff (page images at HathiTrust)
Manufacturing processes. (American Technical Society, 1949), by S. E. Rusinoff (page images at HathiTrust)
Plastics a simplified presentation of the manufacture and use of the important plastics materials and products with tables of their properties and the basic design information required by engineers and designers (American technical society, 1943), by J. Harry DuBois (page images at HathiTrust)
Quality control for plastics engineers. (Reinhold Pub. Corp., 1957), by Lawrence Melvin Debing (page images at HathiTrust)
Plastics for industrial use : an engineering handbook of materials and methods (McGraw-Hill, 1942), by John Sasso (page images at HathiTrust)
Plastics in practice, a handbook of product applications (McGraw-Hill book company, inc., 1945), by John Sasso and Michael A. Brown (page images at HathiTrust)
A concise guide to plastics (Reinhold Pub. Corp., 1963), by Herbert R. Simonds and James Marion Church (page images at HathiTrust)
The chemistry of commercial plastics (Reinhold, 1947), by Reginald Leslie Wakeman (page images at HathiTrust)
Plastic horizons (Jaques Cattell, 1944), by B. H. Weil and Victor John Anhorn (page images at HathiTrust)
Plastic molding and plant management (Chemical publishing co., inc., 1944), by Denis A. Dearle (page images at HathiTrust)
Plastics for corrosion-resistant applications (Reinhold, 1955), by Raymond B. Seymour and Robert H. Steiner (page images at HathiTrust)
The making & moulding of plastics: with ten tables and fifty-one illustrations. (Chemical publishing co. inc., 1938), by L. M. T. Bell (page images at HathiTrust)
The technology of plastics and resins (D. Van Nostrand Company, inc., 1945), by John Philip Mason and Joseph Francis Manning (page images at HathiTrust)
Plastics; theory, properties, application, technique ... (Plastics industries technical institute, 1941), by Plastics Industries Technical Institute (page images at HathiTrust)
Industrial plastics (Pitman publishing corporation, 1943), by Herbert R. Simonds and Alexander Klemin (page images at HathiTrust)
Manual of extruded plastics for sales engineers. ([R.D. Werner company, inc., 1943), by inc. Werner (R.D.) company (page images at HathiTrust)
State of the art: methods of bonding fluorocarbon plastics to structural materials. (Plastics Technical Evaluation Center, 1961), by Marjorie C St. Cyr and Plastics Technical Evaluation Center (U.S.) (page images at HathiTrust)
Modern plastic surgical prosthetics ... (Grune & Stratton, 1947), by Adolph Martin Brown (page images at HathiTrust)
Acrylic inlays, crowns and bridges. (Lea & Febiger, 1950), by Irwin Robert Levy (page images at HathiTrust)
Plastics in nuclear engineering (Reinhold Pub. Corp., 1961), by James Oliver Turner (page images at HathiTrust)
New uses of celluloid and similar material in taxidermy (Chicago, 1925), by Leon L. Walters and Wilfred Hudson Osgood (page images at HathiTrust)
Plastics for aircraft. (U. S. Govt. print. off., 1943), by United States. Army-Navy-Civil Committee on Aircraft Design Criteria (page images at HathiTrust)
"Plastics" in the school and home workshop (Governor publishing corporation, 1937), by Andrew Jules Lockrey (page images at HathiTrust)
Gummifreie isolierstoffe, technisches und wirtschaftliches (Druck der Spamerschen buchdruckerei], 1927), by Arthur Sommerfeld and e. v Zentralverband der deutschen elektrotechnischen industrie (page images at HathiTrust; US access only)
Plastics for aircraft; ANC-17 bulletin. (Dept. of the Air Force, Air Research and Development Command, 1955), by Forest Products Laboratory (U.S.) and United States. ANC-17 Panel on Plastics for Aircraft (page images at HathiTrust)
Fabricated materials and parts. (Reinhold, 1953), by Theodore C. Du Mond (page images at HathiTrust)
Plastics in the world of tomorrow (E.P. Dutton & co., inc., 1944), by Burr W. Leyson (page images at HathiTrust)
Technical data on plastics. (Washington, 1957), by Manufacturing Chemists' Association (U.S.) (page images at HathiTrust)
Plastics; theory, properties, application, technique. Index, suppl'm'nt and Trends. ([New York, 1943), by Plastics Industries Technical Institute (page images at HathiTrust)
Feasibility study of plastic automotive structure. Summary report. (1975), by Herbert A. Jahnle (page images at HathiTrust)
Conference on basic research directions for advanced automotive technology. Proceedings. February 13-14, 1979, Volume I. (1979), by 13-14 Feb 1979 Basic Research Directions for Advanced Automotive Technology (page images at HathiTrust)
Conference on basic research directions for advanced automotive technology. Proceedings. February 13-14, 1979, Volume II. (1979), by 13-14 Feb 1979 Basic Research Directions for Advanced Automotive Technology (page images at HathiTrust)
Automotive applications of composite materials. Final report. (1978), by Robert Kaiser (page images at HathiTrust)
Automotive manufacturers' cost/revenue, financial and risk analysis: projected impact of automobile manufacturing on the plastics industry. Final report. (1979), by Robert Kaiser (page images at HathiTrust)
Material applications in future automotive structure. Volume I: summary report. Final report. (1979), by Herbert A. Jahnle (page images at HathiTrust)
Policy conflict--energy, environmental, and materials: automotive fuel-economy standards' implications for materials. Report to the Congress. (1980) (page images at HathiTrust)
Weight reduction potential of automobiles and light trucks, 1979 summary source document. Final report. (1980), by Hsi-sheng Hsia and James A. Kidd (page images at HathiTrust)
Technology assessment of automotive applications of metal-plastic laminates. Volume I. Final report. (1980), by Robert Kaiser (page images at HathiTrust)
Technology assessment of automotive applications of metal-plastic laminates. Volume II. Final report. (1980), by Robert Kaiser (page images at HathiTrust)
Automotive manufacturing processes. Volume IV - metal stamping and plastic forming process. Final report. (1981) (page images at HathiTrust)
Automotive manufacturing processes. Volume V - manufacturing processes and equipment for the mass production and assembly of motor vehicles. Final report. (1981) (page images at HathiTrust)
Consumer orientations toward fuel efficient vehicles. Executive summary. Final report. (1981), by Robert Kernish (page images at HathiTrust)
Consumer orientations toward fuel efficient vehicles. Final report. (1981), by Robert Kernish (page images at HathiTrust)
Skid resistance of pavement marking materials. Volume I. Final report. (1981), by John J. Henry, D. A. Anderson, and G. F. Hayhoe (page images at HathiTrust)
Profiles of major suppliers to the automotive industry. Volume 1: overview. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
Profiles of major suppliers to the automotive industry. Volume 3: plastics, glass and fiberglass suppliers to the automotive industry. Final report. (1982), by J. A. Mateyka, W. R. Magro, A. S. Karlin, and D. J. Yee (page images at HathiTrust)
Fiberglass reinforced piping for shipboard systems. (1976), by G. A. Uberti (page images at HathiTrust; US access only)
Plastics in shipbuilding. (1977) (page images at HathiTrust; US access only)
Field evaluation of a generic thermoplastic pavement marking material. Final report. (1984), by C. W. Niessner (page images at HathiTrust)
Glass-plastic glazing for side window ejection reduction. Final report. (1989), by B. S. Peterson, P. L. Sursi, and Patrick M. Glance (page images at HathiTrust)
Evaluation of deflection and bending strength characteristics of fiber-reinforced plastic lighting standards. (1995), by M. O'Keeffe (page images at HathiTrust)
Recycled plastics for highway appurtenances. (1999), by M. A. Saadeghvaziri and K. M. MacBain (page images at HathiTrust)
Summary and recommendations of recycled materials in roadside safety devices. (2001), by Roger P. Bligh, Dean Alberson, and Barbara G. Butler (page images at HathiTrust)
Laboratory testing of recycled materials in roadside safety devices. (2001), by Roger P. Bligh, Dean Alberson, A. O. Atahan, and A. R. Bowen (page images at HathiTrust)
Plastics and molded electrical insulation (The Chemical Catalog Company, 1923), by Emile Hemming (page images at HathiTrust)
Plastics; a simplified presentation of the manufacture and use of the important plastics materials and products, with tables of their properties and the basic design information required by engineers and designers. (American Technical Society, 1942), by J. Harry DuBois and American Technical Society (page images at HathiTrust)
Polyamide resins. (Reinhold Pub. Corp., 1958), by Don Edgar Floyd (page images at HathiTrust)
A concise guide to plastics. (Reinhold Pub. Corp., 1957), by Herbert R. Simonds (page images at HathiTrust)
The ceramic arts (The Macmillan company, 1942), by William H. Johnson and Louis V. Newkirk (page images at HathiTrust)
Polymerized trifluorochloroethylene (Atomic Energy Commission, 1947), by Plax Corporation and U.S. Atomic Energy Commission (page images at HathiTrust)
Metals and plastics; production and processing. (Irwin-Farnham publishing company, 1947), by Thomas P. Hughes (page images at HathiTrust)
Plastics in engineering (Penton publishing company, 1942), by John Delmonte (page images at HathiTrust)
General plastics. (Grosset, 1942), by Raymond Cherry (page images at HathiTrust)
Plastics, problems and processes (International textbook company, 1942), by Dale E. Mansperger, William H. Varnum, and Carson W. Pepper (page images at HathiTrust)
Recovering plastics from urban refuse by electrodynamic techniques (U.S. Dept. of the Interior, Bureau of Mines ;, 1972), by Michael R. Grubbs, Kenneth H. Ivey, United States Bureau of Mines, United States. Bureau of Mines. Solid Waste Research Program, and College Park Metallurgy Research Center (page images at HathiTrust)
An introduction to engineering plastics (Technical Division, 1947), by Derek Warburton Brown and Wilbur T. Harris (page images at HathiTrust)
A study of the decomposition of various plastic materials by marine microorganisms (Scripps Institution of Oceanography, University of California, 1961), by Galen Everts Jones (page images at HathiTrust)
In the matter of certain plastic encapsulated integrated circuits : investigation no. 337-TA-315 (U.S. International Trade Commission, 1992), by United States International Trade Commission (page images at HathiTrust)
Synthetic resins and their plastics. (The Chemical Catalog Co., 1923), by Carleton Ellis (page images at HathiTrust)
Organic plastics (U.S. Dept. of Commerce, National Bureau of Standards, 1936), by Gordon M. Kline and United States. National Bureau of Standards (page images at HathiTrust)
Plastics research and technology at the National Bureau of Standards : a review and bibliography (U.S. Dept. of Commerce, National Bureau of Standards, 1950), by Gordon Mabey Kline and United States. National Bureau of Standards (page images at HathiTrust)
Waste-wood-derived fillers for plastics (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1996), by Brent English and Forest Products Laboratory (U.S.) (page images at HathiTrust)
Physical properties of irradiated plastics (Oak Ridge National Laboratory, 1951), by O. Sisman, C. D. Bopp, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
Radiation stability of plastics and elastomers (Oak Ridge National Laboratory, 1953), by C. D. Bopp, O. Sisman, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Solid State Division (page images at HathiTrust)
Fluidized-bed coating with plastics; technology and potential for military applications (Dover, 1964), by Plastics Technical Evaluation Center (U.S.) and Arthur H. Landrock (page images at HathiTrust; US access only)
Plastics for aerospace vehicles. (Dept. of Defense :, 1971), by Goodyear Aerospace Corporation, United States Federal Aviation Administration, Plastics Technical Evaluation Center (U.S.), and United States. Dept. of Defense (page images at HathiTrust; US access only)
The making & moulding of plastics; with ten tables and fifty-one illustrations. (Chemical publishing co. inc., 1938), by L. M. T. Bell (page images at HathiTrust)
Plastics, a simplified presentation of the manufacture and use of the important plastics materials and products with, tables of their properties and the basic design information required by engineers and designers. (American Technical Society, 1943), by J. Harry DuBois and American Technical Society (page images at HathiTrust)
Adventures with plastics (D. C. Heath, 1947), by Louis V. Newkirk, Coleman Hewitt, and La Vada Zutter (page images at HathiTrust)
SPI handbook. (New York, 1947), by Society of the Plastics Industry (page images at HathiTrust)
Plastics and adhesives : a guide to their physical properties and uses (Propellants and Explosives Dept., U.S. Naval Ordnance Test Station, 1956), by Calif.)Propellants and Explosives Dept Naval Ordnance Test Station (Inyokern, William E. Donaldson, and Lawrence R. Dallett (page images at HathiTrust)
New plastic materials through Government research ([Washington], 1958), by United States Dept. of Commerce. Office of Technical Services and James Kanegis (page images at HathiTrust)
Radiation damage to elastomers, plastics, and organic liquids (Technical Publications, GE-ANPD, 1956), by General Electric Company. Aircraft Nuclear Propulsion Department, Vincent Paul Calkins, and Carl G. Collins (page images at HathiTrust)
Preservation of agricultural specimens in plastics (U.S. Dept. of Agriculture, 1949), by George Russell Fessenden and United States Department of Agriculture (page images at HathiTrust)
Cellulose plastics in war & industry; manual of specifications, properties and applications of sheets, rods, tubes, films, and foils, molding materials, plasticizers, cements, dopes, glazing materials. (Celanese celluloid corporation, 1942), by Celanese celluloid corporation (page images at HathiTrust)
Plastic Center. (San Francisco, 1946), by San Francisco Plastic Center Company (page images at HathiTrust)
Elastic constants for superplastically formed/diffusion bonded corrugated sandwich core (National Aeronautics and Space Administration, 1980), by William L. Ko, E. S. Harrison, Hugh L. Dryden Flight Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Gaseous emissions and toxic hazards associated with plastics in fire situations : a literature review (National Aeronautics and Space Administration ;, 1976), by Thomas L. Junod, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
NASA TN D-6711 (National Aeronautics and Space Administration :, 1972), by Allen G. McLain, Warren C. Kelliher, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Hot laboratory technical report. [Part] II, A sealer and cutter for plastic tubing (Brookhaven National Laboratory, 1949), by Gerald J. Selvin, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Hot laboratory technical report. [Part] IV, Development of a porous plastic disk and auxiliaries (Brookhaven National Laboratory, 1949), by Markite Company, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
Engineering tests T13 plastic airplane landing mat (Waterways Experiment Station, 1965), by Robert Turner, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
Engineering tests of T14 plastic airplane landing mat (Waterways Experiment Station, 1967), by Hugh L. Green, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
Engineering tests of modified T12 plastic airplane landing mat (Waterways Experiment Station, 1968), by Hugh L. Green, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
Engineering tests of T12 plastic airplane landing mat. (U.S. Army Engineer Waterways Experiment Station, 1961), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
Bakelite molding plastics. Thermosetting phenolics and ureas. Thermoplastic acetates and polystyrenes. (Bakelite Corporation, 1940), by Bakelite Corporation (page images at HathiTrust)
Ice skating on plastic. (Detroit, 1954), by Detroit (Mich.). Dept. of Parks and Recreation (page images at HathiTrust; US access only)
Commercialization studies on wood-plastic combinations process. (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1965., 1965), by James C. Evans, Jacky Knopp, Carol H. Collins, Philip R. McDonald, Douglas M. Egan, U.S. Atomic Energy Commission. New York Operations Office, Western New York Nuclear Research Center, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
Plastics made practical. (Bruce Pub. Co., 1948), by Chris Harold Groneman (page images at HathiTrust)
Preparation of wood-plastic combinations using gamma radiation to induce polymerization : effects of gamma radiation on wood (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1963., 1963), by James Albert Kent, William R. Boyle, Anthony Winston, West Virginia University. Engineering Experiment Station, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
Preparation of wood-plastic combinations using gamma radiation to induce polymerization (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1965., 1965), by James A. 1922- Kent, Joseph E. Ayres, Wesley Loos, William R. Boyle, Anthony Winston, West Virginia University. Engineering Experiment Station, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
Preparation of wood-plastic combinations using gamma radiation to induce polymerization (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1963., 1963), by James Albert Kent, West Virginia University. Engineering Experiment Station, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
Building with plastic structural sandwich panels (Monsanto Chemical Co., Plastics Division, 1958), by Bernard P. Spring, Lawrence B. Anderson, and Massachusetts Institute of Technology. Dept. of Agriculture (page images at HathiTrust)
General plastics : projects and procedures. (McKnight & McKnight, 1952), by Raymond Cherry (page images at HathiTrust; US access only)
Plastics (American technical society, 1943), by John Harry Du Bois and American Technical Society (page images at HathiTrust; US access only)
Manufacturing processes ; materials and production. (American Technical Society, 1962), by S. E. Rusinoff (page images at HathiTrust; US access only)
Plastics. (Iowa State College of Agriculture and Mechanic Arts, 1953), by Lionel Kenneth Arnold (page images at HathiTrust; US access only)
The engineering application of the absolute rate theory to plastics: I. Laminates (Salt Lake City, 1951), by Mervin B. Hogan (page images at HathiTrust; US access only)
Fabrics and fibers for passenger cars : automobile manufacturers' views, 1955 compared with 1950 (U.S. Dept. of Agriculture, Agricultural Marketing Service, Marketing Research Division, 1957), by Milton Jacobs (page images at HathiTrust)
Fire hazards of the plastics industry. (New York, 1955), by National Board of Fire Underwriters. Committee on Fire Prevention and Engineering Standards (page images at HathiTrust)
Employment outlook in the plastics products industry (Govt. print. off., 1948), by Sol Swerdloff and Calman R. Winegarden (page images at HathiTrust)
Use and processing of plastics as particle detectors (Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1975), by Fukui Katsura, Klaus-Peter Bartholom©·a, Rudolf Beaujean, Wolfgang Enge, and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
Celanese in the post-war world in the form of plastics and textiles. (Celanese Corporation of America, 1943), by Celanese Corporation of America (page images at HathiTrust; US access only)
Madison Fire Department, Madison, Wisconsin (U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health ;, 2001), by National Institute for Occupational Safety and Health (page images at HathiTrust)
Architectural evolution and engineering analysis of a plastics house of the future ([Massachusetts Institute of Technology, Dept. of Architecture], 1957), by Richard W. Hamilton and Monsanto Chemical Company. Plastics Division (page images at HathiTrust)
Effects of multiaxial stretching on crazing and other properties of transparant plastics (National Advisory Committee for Aeronautics, 1954), by Irvin Wolock, Desmond Ivan George, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
Die Fabrikation künstlicher plastischer Massen sowie der künstlichen Steine, Kunststeine, Stein- und Cement güsse : eine ausführliche Anleitung zur Herstellung aller Arten künstlicher plastischer Massen aus Papier, Papier- und Holzstoff, Cellulose, Holzabfällen, Gips, Kreide, Leim, Schwefel, Chlorzink, und vielen anderen, bis nun wenig verwendeten Stoffen ... (A. Hartleben, 1887), by Johannes Höfer (page images at HathiTrust)
Plastics as building construction materials (Structural Plastics Associates, 1960), by Joseph W. Burris and Harvard University. Graduate School of Business Administration (page images at HathiTrust; US access only)
Annual report on research for use in ANC-17 bulletin "Plastics For Aircraft" (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1956., 1956), by Donald G. Coleman, United States. Air Force. Air Research and Development Command, Wright Air Development Center, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
Experimental study of fatigue crack propagation and retardation using polymethylmethacrylate (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Air Force Systems Command, 1972., 1972), by Francis J. Pitoniak and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
Plastics stock molds (Breskin publishing corporation, 1940), by Modern plastics (page images at HathiTrust; US access only)
Beetle.: It's all color and in all colors. (American Cyanamid Co., 1937), by American Cyanamid Company (page images at HathiTrust; US access only)
Synthetic resins and their raw materials: A survey of the types and uses of synthetic resins, the organization of the industry, and the trade in resins and raw materials, with particular references to factors essential to tariff consideration. Under the general provisions of section 332, title III, part II, Tariff act of 1930., by United States Tariff Commission (Gutenberg ebook)

More items available under narrower terms.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.