The Online Books Page

Plates, Iron and steel

See also what's at your library, or elsewhere.

• Iron, Structural
• Plates (Engineering)
• Steel, Structural
• Plates

• Steel plate industry

• Plates, Iron and steel -- Catalogs
• Plates, Iron and steel -- Compression testing
• Plates, Iron and steel -- Fracture
• Plates, Iron and steel -- Specifications
• Plates, Iron and steel -- Taxation
• Plates, Iron and steel -- Testing
• Plate girders

• Base-plates
• Iron and steel plates
• Steel and iron plates

• Lancaster hand book; general data useful in connection with the design and fabrication of steel plate construction: pressure vessels, smokestacks, storage tanks, bins, towers, dredge pipe, hulls, barges, etc. (Lancaster Iron Works, 1950), by inc Posey Iron Works (page images at HathiTrust; US access only)
• Lukens Steel Company (world's largest plate mill) [handbook. (Lukens Steel Company, 1924), by Lukens Steel Company (page images at HathiTrust)
• Berechnung ebener, rechteckiger Platten mittels trigonometrischer Reihen. (R. Oldenbourg, 1911), by Karl Hager (page images at HathiTrust; US access only)
• Clad steel plate from Japan : [investigation no. 731-TA-739 (preliminary)] (U.S. International Trade Commission, 1995), by United States International Trade Commission (page images at HathiTrust)
• Clad steel plate from Japan (U.S. International Trade Commission, 1996), by United States International Trade Commission (page images at HathiTrust)
• Expériences de force et de traction sur des tôles suédoises produites par des proceédés divers : faites aux frais du Comptoir des Forges (Jernkontoret). (Imprimerie K.-L. Beckman, 1878), by Sweden. Järnkontoret (page images at HathiTrust)
• Optimum distribution of material in sandwich plates loaded in their plane. Including plates with varying modulus of elasticity. (Cornell Aeronautical Laboratory, Inc., 1950), by P. P. Bijlaard (page images at HathiTrust)
• Buckling of uniformly compressed steel plates in the strain-hardening range. (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by Geerhard Haaijer (page images at HathiTrust)
• Fatigue tests of plate joints and bolted lugs. ARO project. Final report, September 30, 1954. (Cornell University [Dept. of Engineering Mechanics and Materials, 1954), by J. O. Jeffrey and Cornell University. School of Mechanical Engineering (page images at HathiTrust)
• Compressive strength of column web plates and wide web columns (U.S. Dept. of Commerce, Bureau of Standards :, 1926), by Robert Smith Johnston and United States. National Bureau of Standards (page images at HathiTrust)
• Analysis of clamped square plates containing openings with stiffened edges (University of Illinois, 1961) (page images at HathiTrust)
• Cold-rolled carbon steel plates and sheets from Argentina : determination of the Commission in investigation no. 731-TA-175 (final) under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1985), by United States International Trade Commission (page images at HathiTrust)
• Comparison of computed centerline dose rates from different areas of a source plate (General Electric, Aircraft Nuclear Propulsion Dept., Atomic Products Division, 1958), by A. W. Casper, J. G. Carver, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust; US access only)
• Rolling tests of plates (University of Illinois, 1929), by Wilbur M. Wilson (page images at HathiTrust; US access only)
• Fatigue tests of riveted joints : a report of an investigation conducted by the Engineering Experiment Station, University of Illinois, in coöperation with the Department of Public Works, State of California (University of Illinois, 1938), by Wilbur M. Wilson, Frank Peter Thomas, and California. Department of Public Works (page images at HathiTrust; US access only)
• On the stability of stiffened plates (U.S. Experimental Model Basin, Navy Yard, 1935), by Stephen Timoshenko, Dwight F. Windenburg, M.C. Roemer, and U.S. Experimental Model Basin (page images at HathiTrust)
• Compressive properties; perforated cover plates for steel columns. Progress report no. 1- (Committee on Technical Research, American Institute of Steel Construction, 1941), by United States. Bureau of Standards (page images at HathiTrust; US access only)
• A study of base and bearing plates for columns and beams (The University, 1909), by N. Clifford Ricker (page images at HathiTrust)
• Behavior of metal plate connection in wood trusses ([Dept. of Civil Engineering], University of California, 1985), by Vong D. Toan, Raul M. Romstad, Davis. Civil Engineering University of California, and Structural Engineers Association of Central California (page images at HathiTrust)
• Cleavage fractures of ship plates : a report of an investigation (University of Illinois, College of Engineering, 1951), by Wilbur M. Wilson, Walter Herbert Bruckner, and Robert Aaron Hechtman (page images at HathiTrust; US access only)
• Puncture of shielded radioactive material shipping containers (Washington, D. C. : Division of Safeguards, Fuel Cycle, and Environmental Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1980., 1980), by R. Larder, D. Arthur, Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards, Lawrence Livermore Laboratory, United States. National Technical Information Service, and United States Government Printing Office (page images at HathiTrust)

• Glasgow Iron Company : manufacturers of iron and steel plates, muck bars and flanged and pressed work. ([The Company], 1920), by Glasgow Iron Company (page images at HathiTrust)
• Glasgow Iron Company, : manufacturers of iron and steel plates, muck bars and flanged and pressed work. ([The Company], 1909), by Glasgow Iron Company (page images at HathiTrust)
• Glasgow Iron Company : manufacturers of iron and steel plates, muck bars and flanged and pressed work. ([The Company], 1912), by Glasgow Iron Company (page images at HathiTrust)
• "A.W." rolled steel floor plates (The Co., 1920), by Alan Wood Steel Company (page images at HathiTrust)

• On the stability of stiffened plates (U.S. Experimental Model Basin, Navy Yard, 1935), by Stephen Timoshenko, Dwight F. Windenburg, M.C. Roemer, and U.S. Experimental Model Basin (page images at HathiTrust)

• Analysis of brittle behavior in ship plates (National Research Council, Division of Engineering and Industrial Research, 1955), by Morgan L. Williams, American Society for Testing Materials, National Research Council (U.S.). Committee on Ship Steel, United States. Ship Structure Committee, United States. National Bureau of Standards, and Symposium on Effect of Temperature on the Brittle Behavior of Metals with Particular Reference to Low Temperatures (1953) (page images at HathiTrust; US access only)

• Specifications for making and laying 54" wrought iron pipe, asphaltum coating for pipes, & for the manufacture of flange boiler iron. (1902), by Spring Valley Water Company (page images at HathiTrust; US access only)

• Carbon steel plate from Japan : determination of injury in investigation no. AA1921-179 under the Antidumping act, 1921, as amended, together with the information obtained in the investigation. (International Trade Commission, 1978), by United States International Trade Commission and William J. Hable (page images at HathiTrust)

• Plain base plates for columns (1907), by Carl Rankin Dick (page images at HathiTrust; US access only)
• Variability of fracture toughness in A514/517 plate : executive summary (Department of Transportation, Federal Highway Administration, Offices of Research and Development ;, 1975), by Carl E. Hartbower, Roger D. Sunbury, California. Department of Transportation. Office of Research and Development. Division of Structures, United States. Federal Highway Administration. Office of Research, and United States. Federal Highway Administration. Office of Development (page images at HathiTrust)

• Notes on plate-girder design (Wiley, 1911), by Clarence W. Hudson (page images at HathiTrust)
• Plate-girder railway bridges (E. & F. Spon ;, 1895), by Maurice Fitzmaurice (page images at HathiTrust)
• The design of plate-girders : with appendices on columns and struts, economic columns and web stresses in plate girders (Chapman & Hall, 1908), by W. E. Lilly (page images at HathiTrust; US access only)
• Plate-girder construction (D. Van Nostrand company, 1914), by Isamu Hiroi (page images at HathiTrust)
• Compressive strength of ship hull girders (Ship Structure Committee ;, 1977), by H. Becker, A. Coloa, Sanders Associates, and United States. Naval Sea Systems Command (page images at HathiTrust)
• Design of a plate-girder railroad bridge (1913), by Nixon Lawrence Bunn (page images at HathiTrust; US access only)
• Plate girder stiffeners (1910), by Arthur Carl Griewank (page images at HathiTrust; US access only)
• Investigation of a through plate girder railroad bridge (1909), by Frederick Bowman Nicodemus (page images at HathiTrust; US access only)

• Design of a through plate girder (1907), by Charles Herman Tornquist (page images at HathiTrust; US access only)
• Design of a center-bearing deck plate-girder draw-span (1907), by Harry Spencer Peck (page images at HathiTrust; US access only)

• Methods to reduce built-in residual stresses in steel bridge diaphragms (Phase I) (Illinois Dept. of Transportation, Bureau of Materials and Physical Research ;, 2000), by Jeffrey M. South, Christopher Hahin, and Illinois. Dept. of Transportation. Bureau of Materials and Physical Research (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Cold-rolled carbon steel plates and sheets from Argentina : determination of the Commission in investigation no. 731-TA-175 (final) under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1985), by United States International Trade Commission (page images at HathiTrust)
• Cold-rolled carbon steel plates and sheets from Argentina : views on remand in investigation no. 731-TA-175 (final) (second remand). (U.S. International Trade Commission, 1988), by United States International Trade Commission (page images at HathiTrust)

• Certain carbon steel products from Brazil : determinations of the Commission in investigations nos. 701-TA-205-207 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1984), by United States International Trade Commission (page images at HathiTrust)

• Clad steel plate from Japan : [investigation no. 731-TA-739 (preliminary)] (U.S. International Trade Commission, 1995), by United States International Trade Commission (page images at HathiTrust)
• Clad steel plate from Japan (U.S. International Trade Commission, 1996), by United States International Trade Commission (page images at HathiTrust)

• Stainless steel plate from Sweden : determination of inquiry in investigation no. AA1921-114 under the Antidumping Act, 1921, as amended. (U.S. Tariff Commission, 1973), by United States Tariff Commission (page images at HathiTrust; US access only)

• Clad steel plate from Japan : [investigation no. 731-TA-739 (preliminary)] (U.S. International Trade Commission, 1995), by United States International Trade Commission (page images at HathiTrust)
• Clad steel plate from Japan (U.S. International Trade Commission, 1996), by United States International Trade Commission (page images at HathiTrust)
• Cold-rolled carbon steel plates and sheets from Argentina : determination of the Commission in investigation no. 731-TA-175 (final) under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1985), by United States International Trade Commission (page images at HathiTrust)
• Cold-rolled carbon steel plates and sheets from Argentina : views on remand in investigation no. 731-TA-175 (final) (second remand). (U.S. International Trade Commission, 1988), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel plate from Sweden : determination of inquiry in investigation no. AA1921-114 under the Antidumping Act, 1921, as amended. (U.S. Tariff Commission, 1973), by United States Tariff Commission (page images at HathiTrust; US access only)
• Certain carbon steel products from Brazil : determinations of the Commission in investigations nos. 701-TA-205-207 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1984), by United States International Trade Commission (page images at HathiTrust)

More items available under broader and related terms at left.