The Online Books Page

Plywood -- Testing

See also what's at your library, or elsewhere.

• Plywood
• Laminated wood -- Testing
• Veneers and veneering -- Testing
• Testing

• Plywood -- United States -- Testing

• Experiments with a single layer plywood monkey saddle shell (School of Engineering and Architecture, University of Kansas, 1961), by Willard Strode and Donald Lee Dean (page images at HathiTrust)
• Predicting bending strength of fire retardant treated plywood from screw-withdrawal tests (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1998), by Jerrold E. Winandy, William Nelson, Patricia K. Lebow, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of panel thickness and noncombustible inserts on surface flammability of plywood (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1967), by Erwin L. Schaffer and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Performance of nail-glued joints of plywood to solid wood (Forest Products Laboratory, 1964), by Donald V. Doyle and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Study of the local resistance of conventional plywood subflooring to concentrated load (U.S. Dept. of Commerce, National Bureau of Standards :, 1974), by Felix Y. Yokel, United States. National Bureau of Standards, Center for Building Technology, and United States. Department of Housing and Urban Development. Office of Research and Technology (page images at HathiTrust)
• Summary of formulas for flat plates of plywood under uniform or concentrated loads (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1959), by Herman W. March, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Methods of calculating the strength and modulus of elasticity of plywood in compression (United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1946), by J. A. Liska, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Methods of computing the strength and stiffness of plywood strips in bending (United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1946), by Alan D'Yarmett Freas, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Summary of formulas for flat plates of plywood under uniform or concentrated loads (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1941), by Herman W. March, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Stability of a few curved panels subjected to shear (United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1947), by Edward W. Kuenzi, Forest Products Laboratory (U.S.), and University of Wisconsin (page images at HathiTrust)

• Roof temperatures in simulated attics (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1995), by Jerrold E. Winandy, Rhett Beaumont, and Forest Products Laboratory (U.S.) (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• Fabrication and design of glued laminated wood structural members (U. S. Govt. Print. Off., 1954), by Alan D'Yarmett Freas and Magnus Leonard Selbo (page images at HathiTrust)
• Veneer and plywood ([Washington, 1945), by Association of American Railroads. Railroad Committee for the Study of Transportation and Jesse Charles Nellis (page images at HathiTrust)
• The manufacture and use of plywood & glue (Sir I. Pitman & sons, ltd., 1920), by B. C. Boulton (page images at HathiTrust; US access only)
• Resin adhesives for plywood: tego, amberlite, uformite. (The Resinous products & chemical company, 1944), by Philadelphia Resinous products and chemical company (page images at HathiTrust)
• Resin adhesives for plywood: tego, amberlite, uformite. (The Resinous products & chemical company, 1942), by Philadelphia Resinous products and chemical company (page images at HathiTrust)
• Design of wood aircraft structures (Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria, Munitions Board, Aircraft Committee, 1951), by Forest Products Laboratory (U.S.) and United States. Munitions Board. Aircraft Committee. Subcommittee on Air Force-Navy-Civil Aircraft Design Criteria (page images at HathiTrust)
• Technical data on Douglas fir plywood for engineers and architects. (Tacoma, Wash., 1942), by Douglas Fir Plywood Association (page images at HathiTrust)
• Rapid laminating of lumber without high-frequency heat. (State College of Washington, Division of Industrial Research, 1956), by George G. Marra (page images at HathiTrust)
• Design, construction and testing of a plywood hyperbolic paraboloid lattice structure (University of Kansas, 1958), by Willard Strode and Donald Lee Dean (page images at HathiTrust)
• Potential for producing ponderosa pine plywood in the Black Hills (Rocky Mountain Forest and Range Experiment Station, Forest Service, U.S. Dept. of Agriculture, 1981), by Dennis M. Donnelly, Harold E. Worth, and Colo.) Rocky Mountain Forest and Range Experiment Station (Fort Collins (page images at HathiTrust)
• Handicraft in plywood (Sir I. Pitman & sons, 1928), by William Buller Little (page images at HathiTrust; US access only)
• Manufacture of veneer and plywood from United States hardwoods with special reference to the South (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1975), by J. F. Lutz, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of accelerated aging on the bending strength and stiffness of COM-PLY truss lumber produced in a pilot plant (U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station, 1985), by Robert H. McAlister and N.C.) Southeastern Forest Experiment Station (Asheville (page images at HathiTrust)
• Construction-grade plywood from grade 3 Appalachian oak (Northeastern Forest Experiment Station, Forest Service, U.S. Dept. of Agriculture, 1970), by E. Paul Craft and United States Forest Service (page images at HathiTrust)
• Factors that affect choice of shelving materials in single-family homes (U.S. Dept. of Agriculture, Forest Service, Intermountain Forest & Range Experiment Station, 1968), by Robert Earl Benson, John R. Host, and Intermountain Forest and Range Experiment Station (Ogden, Utah) (page images at HathiTrust)
• Veneer recovery from Douglas-fir logs (U.S. Dept. of Agriculture, Forest Service, Pacific Northwest Forest and Range Experiment Station, 1957), by Edward H. Clarke, A. C. Knauss, and Or.) Pacific Northwest Forest and Range Experiment Station (Portland (page images at HathiTrust)
• How nine inorganic salts affected smoke yield from Douglas-fir plywood (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1975), by John J. Brenden, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Veneer-reinforced structural composition board (Dept. of Agriculture, Forest Service, Southern Forest Experiment Station ;, 1979), by Otto Suchsland, Sidon Keinert, George E. Woodson, United States Forest Service, and La.) Southern Forest Experiment Station (New Orleans (page images at HathiTrust)
• Effect of veneer grade on bending and compression of COM-PLY truss lumber (U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station ;, 1983), by Robert H. McAlister, N.C.) Southeastern Forest Experiment Station (Asheville, and United States. Dept. of Housing and Urban Development (page images at HathiTrust)
• Preliminary evaluation of small-diameter Black Hills ponderosa pine for veneer and plywood (Rocky Mountain Forest and Range Experiment Station, Forest Service, U.S. Dept. of Agriculture, 1968), by Lincoln A. Mueller, J. F. Lutz, Donald C. Markstrom, and Colo.) Rocky Mountain Forest and Range Experiment Station (Fort Collins (page images at HathiTrust)
• A look at yellow-poplar for studs (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1977), by Hiram Hallock, Erwin H. Bulgrin, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Linear expansion design theory for COM-PLY panels (U.S. Dept. of Agriculture, Forest Service, Southern Forest Experiment Station, 1981), by John W. Talbott, N.C.) Southeastern Forest Experiment Station (Asheville, Washington State University. Wood Technology Section, and Building Technology United States. Division of Energy (page images at HathiTrust)
• Wood finishing : finishing exterior plywood (The Laboratory, 1966), by Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Location of laminae by elastic modulus may permit manufacture of very strong beams from rotary-cut southern pine veneer (Southern Forest Experiment Station, Forest Service, U.S. Dept. of Agriculture, 1967), by Peter Koch and La.) Southern Forest Experiment Station (New Orleans (page images at HathiTrust)
• How fourteen coating systems affected smoke yield from Douglas-fir plywood (Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by John J. Brenden and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• The hardwood plywood manual (Hardwood Plywood Institute, 1962), by T. R. Truax (page images at HathiTrust; US access only)
• Effect of fire-retardant treatment and redrying on the mechanical properties of douglas-fir and aspen plywood (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1988), by Jerrold E. Winandy and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Plywood: properties, design and construction (Douglas Fir Plywood Association, 1962), by Nelson Secor Perkins and Douglas Fir Plywood Association (page images at HathiTrust)
• Notes on the manufacture of plywood. Rev. September, 1922. ([Madison, Wis., 1922), by Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Structural and heat-transfer properties of "Multiple box-girder plywood panels" for walls, floors, and roofs sponsored by Loren H. Wittner (U.S. Dept. of Commerce, National Bureau of Standards :, 1943), by Robert L. Whittemore, R. F. Luxford, Loren H. Wittner, Richard S. Dill, Vincent B. Phelan, and United States. National Bureau of Standards (page images at HathiTrust)
• Structural properties of prefabricated plywood lightweight constructions for walls, partitions, floors, and roofs sponsored by the Douglas Fir Plywood Association (U.S. Dept. of Commerce, National Bureau of Standards :, 1945), by Arnold Wexler, R. F. Luxford, Vincent B. Phelan, Sanford B. Newman, United States. National Bureau of Standards, and Douglas Fir Plywood Association (page images at HathiTrust)
• Estimating veneer requirements in plywood manufacture (Maine Agricultural Experiment Station, 1969), by Allen M. Brackley and James E. Shottafer (page images at HathiTrust; US access only)
• Veneer and plywood yields from eastern spruce (Maine Agricultural Experiment Station, 1969), by Allen M. Brackley and James E. Shottafer (page images at HathiTrust; US access only)
• Plywood with tongue and groove joints (Technical Dept., Douglas Fir Plywood Association, 1961), by Daniel H. Brown, Ronald H. Drawsky, and Douglas Fir Plywood Association (page images at HathiTrust; US access only)
• A lighter packing case (Atlas plywood corporation, 1921), by Atlas plywood corporation (page images at HathiTrust)
• American Douglas fir plywood and its uses (U.S. G.P.O., 1937), by United States Bureau of Foreign and Domestic Commerce (page images at HathiTrust)
• American hardwood plywood (U.S. G.P.O., 1940), by Joseph Leo Muller (page images at HathiTrust)
• Birch three-ply door skins from Japan : determination of the Commission in investigation no. 751-TA-6 under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1982), by United States International Trade Commission, Jeffrey Wood, Norman Elrod, and David Coombs (page images at HathiTrust)
• Metal-surfaced plywood (U.S. Atomic Energy Commission, Technical Information Branch, 1949), by B. H. Webb, Knolls Atomic Power Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Suggested arrangements of Weldwood paneling for interior walls : architectural sketches showing designs and selected details ([New York, 1950), by United States Plywood Corporation (page images at HathiTrust; US access only)
• Weldwood plywood for commercial interiors : stores, offices, banks, hotels, institutions, bars & restaurants. ([New York, 1946), by United States Plywood Corporation (page images at HathiTrust; US access only)
• Weldwood plywood for interiors : installation booklet. ([New York, 1946), by United States Plywood Corporation (page images at HathiTrust; US access only)
• Second homes for leisure living. ([Tacoma, Wash., 1960), by American Plywood Association (page images at HathiTrust; US access only)
• Standard costing principles and practices for the Plywood industry. (Plywood Manufacturers Association, 1922), by Plywood Manufacturers Association (page images at HathiTrust)
• United States plywood imports, 1956-59. (Washington, D.C. : U.S. Department of Commerce, Business and Defense Services Administration, 1960., 1960), by United States. Business and Defense Services Administration (page images at HathiTrust)
• United States plywood imports, 1960-64. (1965), by United States. Business and Defense Services Administration (page images at HathiTrust)
• Plywood as a structural covering for frame walls and wall units (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1934), by George W. Trayer, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Reduction of waste in the veneer and plywood industry (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1947), by Herbert O. Fleischer and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Bag-molding of plywood (Forest Products Laboratory, 1943), by Bruce G. Heebink and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Effect of boiling for various periods of time on the strength of joints in birch plywood bonded with urea glue fortified with varying amounts of melamine and resorcinol (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1946), by Sylvia M. Lecher, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Resin-treated, laminated, compressed wood (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1941), by Alfred J. Stamm, R. M. Seborg, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Fabricated wall panels with plywood coverings (United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1936), by R. F. Luxford, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Notes on the manufacture of flat plywood. (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1943), by University of Wisconsin, Forest Products Laboratory (U.S.), and United States Forest Service (page images at HathiTrust)
• How to build with plywood. (Fawcett, 1956), by Robert Edward Hertzberg (page images at HathiTrust; US access only)
• Supplementary special materials bulletin no. 5-A : Metal-surfaced plywood (Schenectady, New York : Knolls Atomic Power Laboratory, 1950., 1950), by B. H. Webb, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Weldwood sales manual. ([New York, 1952), by United States Plywood Corporation (page images at HathiTrust; US access only)
• List of publications on structural sandwich, plastic laminates, and wood-base components. (Madison, 1964), by Forest Products Laboratory (U.S.) (page images at HathiTrust)

More items available under broader and related terms at left.