The Online Books Page

Polymers

See also what's at Wikipedia, your library, or elsewhere.

Broader term:

Macromolecules

Narrower terms:

Used for:

Polymere
Polymeride
Polymers and polymerization

Filed under: Polymers

Monomeric Acrylic Esters (New York: Reinhold Pub. Corp., 1954), by Edward Hollister Riddle (page images at HathiTrust)
Relaxations in complex systems (U.S. G.P.O ;, 1985), by G. B. Wright, K. L. Ngai, United States. Office of Naval Research, and Naval Research Laboratory (U.S.) (page images at HathiTrust)
An introduction to the organic chemistry of high polymers. (Wiley, 1959), by Carl Shipp Marvel (page images at HathiTrust)
Fundamentals of synthetic polymer technology in its chemical and physical aspects. (Elsevier Pub. Co., 1949), by R. Houwink (page images at HathiTrust)
Polymer processing (John Wiley, 1962), by James M. McKelvey (page images at HathiTrust)
Preparative methods of polymer chemistry (Interscience Publishers, 1961), by Wayne Richard Sorensen and Tod W. Campbell (page images at HathiTrust)
Organic peroxides: their chemistry, decomposition, and role in polymerization (Interscience Publishers, 1954), by Arthur Victor Tobolsky and Robert B. Mesrobian (page images at HathiTrust)
Polymerization and its applications in the fields of rubber, synthetic resins, and petroleum, by Robert E. Burk, Howard E. Thompson, Archie J. Weith, and Ira Williams. (Reinhold publishing corporation, 1937), by R. E. Burk, Buddy Williams, Archie J Weith, and Howard E. Thompson (page images at HathiTrust)
Mechanical properties of polymers. (Van Nostrand Reinhold, 1962), by Lawrence E. Nielsen (page images at HathiTrust)
Polymers and resins: their chemistry and chemical engineering. (Van Nostrand, 1959), by Brage Golding (page images at HathiTrust)
Principles of high-polymer theory and practice; fibers, plastics, rubbers, coatings, adhesives (McGraw-Hill Book Co., 1948), by Alois X. Schmidt and Charles Angell Marlies (page images at HathiTrust)
Adhesive restorative dental materials, a literature survey of inorganic polymers. (U.S. Naval Research Laboratory, 1965), by D. L. Venezky (page images at HathiTrust)
Mechanism of polymer reactions. (Interscience Publishers, 1954), by George Murray Burnett and H. F. Mark (page images at HathiTrust)
The effects of ionizing radiation on natural and synthetic high polymers (Interscience Publishers, 1958), by Frank A. Bovey (page images at HathiTrust)
Infrared spectra of high polymers. (Harrison M. Randall Laboratory of Physics, University of Michigan, 1960), by Samuel Krimm (page images at HathiTrust)
Fundamentals of high polymers. (Reinhold Pub. Corp., 1958), by O. A. Battista (page images at HathiTrust)
Friction of polymeric brake materials. Final report. (1974), by K. C. Ludema (page images at HathiTrust)
Piezoelectric polymer transducer for impact pressure measurement. Final report. (1975), by Aime S. DeReggi (page images at HathiTrust)
A study of rigid polyurethane foam. Volume I - summary report. Final report. (1977), by V. A. Grasso (page images at HathiTrust)
A study of rigid polyurethane foam. Volume II - final report. (1977), by V. A. Grasso (page images at HathiTrust)
Piezoelectric polymer transducers for dynamic pressure measurements. Final report. (1977), by Aime S. DeReggi, Scymour Edelman, and Steven C. Roth (page images at HathiTrust)
Development and evaluation of azobis-blown foam for molding Part 572 dummy flesh components. Final report. (1977), by S. W. Alderson and S. J. Goldner (page images at HathiTrust)
Substitute foaming agent for the manufacture of Part 572 dummy flesh components. Final report. (1978), by William Paul Whelan and Martin I. Jacobs (page images at HathiTrust)
Side impact padding integration study. Final report. (1981), by Michael W. Monk and Lisa K. Sullivan (page images at HathiTrust)
Durable pavement marking materials: summary report of 1981 workshops. (1981), by M. A. McGrath (page images at HathiTrust)
Evaluation of experimental railroad-highway grade crossings in Louisiana. Interim report no. 6. (1983), by Steve G. Bokun and A. F. Moore (page images at HathiTrust)
Powder coating for highway safety appurtenances. Final report. (1986), by N. E. Knight (page images at HathiTrust)
Crash padding research. Volume I: material mechanical properties. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
Crash padding research. Volume II: constitutive equation models. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
Composite rib development. Final report. (1993), by L. Ore and R. Saul (page images at HathiTrust)
Full-scale fire testing of seat component materials. (1993), by Patricia Cahill (page images at HathiTrust)
Cost-effective marking and delineation materials for highways. Final report. (1994), by Bill J. Chapman (page images at HathiTrust)
Evaluation of urethane snow plow blades as an alternative to rubber blades. Final report. (1995), by Daniel S. Roosevelt (page images at HathiTrust)
Investigations of plastic composite materials for highway safety structures. (1998), by P. K. Dutta (page images at HathiTrust)
Chemical additives for improvement of oil spill control : final report (Dept. of Transportation, U.S. Coast Guard, Office of Research and Development ;, 1974), by W. H. Bauer and Rensselaer Polytechnic Institute (page images at HathiTrust)
Fabrication and evaluation of new ultrathin reverse osmosis membranes (U.S. Dept. of the Interior; for sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Peter S. Francis, United States. Office of Saline Water. Biosciences Division, and Minn.) North Star Research and Development Institute (Minneapolis (page images at HathiTrust)
Research and development of new polymer systems for reverse osmosis membranes (U.S. Dept. of Interior, Office of Saline Water, 1966), by C. W. Saltonstall, R. E. Kesting, W. S. Higley, United States. Office of Saline Water, Aerojet-General Corporation, and United States. Office of Saline Water. Biosciences Division (page images at HathiTrust)
Research and development of new polymer systems for reverse osmosis membranes (U.S. Dept. of the Interior, Office of Saline Water, 1966), by C. W. Saltonstall, W. M. King, W. S. Higley, United States. Office of Saline Water, and Aerojet-General Corporation (page images at HathiTrust)
Polymer structure and ionic transport of polystyrenesulfonate model membranes (U.S. Govt. Print. Off., 1967), by Richard A. Wallace, University of California, and United States. Office of Saline Water (page images at HathiTrust)
Second report on fabrication and evaluation of new ultrathin reverse osmosis membranes (U.S. Dept. of the Interior, 1967), by Peter S. Francis, J. E. Cadotte, Minn.) North Star Research and Development Institute (Minneapolis, and United States. Office of Saline Water (page images at HathiTrust)
Expanded glassy polymers and polyelectrolyte complexes as reverse osmosis and ion-selective membranes (U.S. Dept. of the Interior, [Office of Saline Water], 1967), by Allan S. Hoffman, Allan S. Douglas, W. R. Vieth, Raymond F. Baddour, Massachusetts Institute of Technology, and United States. Office of Saline Water (page images at HathiTrust)
Research and development of new polymer systems for reverse osmosis membranes (U.S. Dept. of the Interior, Office of Saline Water, 1968), by C. W. Saltonstall, W. S. Higley, Aerojet-General Corporation. Environmental Systems Division, and United States. Office of Saline Water (page images at HathiTrust)
Development of ultrathin skin membranes - hema polymers (U.S. Dept. of the Interior, Office of Saline Water, 1968), by Allan S. Hoffman, M. Modell, United States. Office of Saline Water, and Massachusetts Institute of Technology (page images at HathiTrust)
Study of poly(methacrylates) and poly(urethanes) as reverse osmosis membranes : effect of water clustering on transport properties (U.S. Dept. of the Interior, Office of Saline Water, 1968), by W. R. Vieth, René Bloch, Allan S. Douglas, United States. Office of Saline Water, and Massachusetts Institutes of Technology (page images at HathiTrust)
Synthesis and evaluation of new membrane candidates for application in reverse osmosis (U.S. Dept. of the Interior, Office of Saline Water, 1969), by Thomas W. Brooks, Carl L. Daffin, Inc Peninsular Chem-Research, and United States. Office of Saline Water (page images at HathiTrust)
Effect of pH and ionic strength on the crystallization and morphology of polymer membranes (U.S. Dept. of the Interior, 1971), by Leo Mandelkern and United States. Office of Saline Water (page images at HathiTrust)
Influence of an organic polymer in ball-mill grinding of quartz, dolomite, and copper ore (U.S. Dept. of the Interior, Bureau of Mines, 1985), by A. R. Rule, C. B. Daellenbach, and A. J. Fergus (page images at HathiTrust)
Scale inhibitors and slow-release polymers for mine water treatment systems (U.S. Dept. of the Interior, Bureau of Mines, 1984), by R. L. P. Kleinmann, T. J. Fox, G. R. Watzlaf, and Terry E. Ackman (page images at HathiTrust)
Preliminary survey of polymer-impregnated rock (U.S. Dept. of Interior, Bureau of Mines, 1971), by Peter Columbo, Meyer Steinberg, D. J. Kelsh, Lester J. Crow, and United States Bureau of Mines (page images at HathiTrust)
Polymerized trifluorochloroethylene (Atomic Energy Commission, 1947), by Plax Corporation and U.S. Atomic Energy Commission (page images at HathiTrust)
The preparation of low polymers of trifluorochloroethylene and their utilization for the production of chlorofluorocarbon (Atomic Energy Commission, 1946), by W. T. Miller and U.S. Atomic Energy Commission Technical Information Division (page images at HathiTrust)
Production of coronene from coal (U.S. Dept. of the Interior, Bureau of Mines, 1964), by Robert W. Fridy, R. W. Hiteshue, W. Kawa, and Sandia Corporation (page images at HathiTrust)
Fundamentals of synthetic polymer technology in its chemical and physical aspects. (Elsevier Pub. Co., 1949), by R. Houwink (page images at HathiTrust)
Gas flood efficiency improvement by polymer injection (U.S. Dept. of the Interior, Bureau of Mines ;, 1970), by Edward L. Burwell, Arlen E. Hunt, United States Bureau of Mines, and United States. Bureau of Mines. Petroleum Research Program (page images at HathiTrust)
Polymer degradation mechanisms; proceedings of the NBS semicentennial symposium on polymer degradation mechanisms held at the NBS on September 24-26, 1951. (Washington, D. C. : U. S. Government Printing Office, 1953., 1953), by United States. National Bureau of Standards (page images at HathiTrust)
The preparation of polyperfluorovinylchloride (Atomic Energy Commission, 1946), by E. A. Belmore, R. L. Murray, W. M. Ewalt, and U.S. Atomic Energy Commission (page images at HathiTrust)
Kolloid-Beihefte. (Steinkopff., 1910) (page images at HathiTrust)
Friction reduction by algal and bacterial polymers (Naval Undersea Research and Development Center, 1971), by Paul R Kenis, J. W Hoyt, and Naval Undersea Research and Development Center (page images at HathiTrust)
Synthesis and degradation of poly alkyl alpha cyanoacrylates (U. S. Army Medical Biomechanical Research Laboratory, 1965), by Fred Leonard, Joshua Nelson, George Brandes, and R. K. Kulkarni (page images at HathiTrust)
Synthesis and evaluation of new polymers prepared by sterospecific catalysis. Materials Central, Contract no. AF33(616)-6866, Project no. 7340. (Aeronautical Systems Division, Air Force Systems Command, U.S. Air Force, 1961), by Charles G. Overberger and Polytechnic Institute of Brooklyn (page images at HathiTrust)
Rheology of polymers (Reinhold Pub. Corp., 1962), by Edward T Severs (page images at HathiTrust)
Materials : a compilation. (Technology Utilization, National Aeronautics and Space Administration, 1974), by United States. National Aeronautics and Space Administration. Technology Utilization Office (page images at HathiTrust)
Evaluation of polymer films for electrical insulation (Oak Ridge National Laboratory ;, 1985), by H. E. McCoy, Oak Ridge National Laboratory. Metals and Ceramics Division, and United States. Dept. of Energy. Office of Conservation and Renewable Energy. Electric Energy Systems Program (page images at HathiTrust)
Low-energy positron flux generator for microstructural characterization of thin films (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by Jag J. Singh, Terry L. St. Clair, Abe Eftekhari, and Langley Research Center (page images at HathiTrust)
Lubrication and wear mechanisms of polymide-bonded graphite fluoride films subjected to low contact stress (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), by Robert L. Fusaro and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Adhesion between polymers and evaporated gold and nickel films (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Yoshinori Yamada, Donald H. Buckley, Donald R. Wheeler, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Homogeneous reactions of hydrocarbons, silane, and chlorosilanes in radiofrequency plasmas at low pressures (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Reuven Avni and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Polytetrafluoroethylene transfer film studied with X-ray photoelectron spectroscopy (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1980), by Donald R. Wheeler, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Polymeric membrane systems of potential use for battery separators (National Aeronautics and Space Administration ;, 1977), by Warren H. Philipp and United States National Aeronautics and Space Administration (page images at HathiTrust)
Friction and wear of polyethylene oxide polymer having a range of molecular weights (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Donald H. Buckley and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
Tribological properties at 25⁰ C of seven polyimide films bonded to 440C high-temperature stainless steel (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1982), by Robert L. Fusaro and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
Fundamental analysis of the failure of polymer-based fiber reinforced composites (U.S. National Aeronautics and Space Administration ;, 1976), by M. F. Kanninen, Battelle Memorial Institute, and Ames Research Center (page images at HathiTrust)
NASA TR R-276 (National Aeronautics and Space Administration ;, 1967), by John A. Parker, Ernest L. Winkler, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
NASA TN D-4463 (National Aeronautics and Space Administration ;, 1968), by Donald W. Wisander, Robert L. Johnson, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Friction and wear life properties of polyimide thin films (National Aeronautics and Space Administration ;, 1972), by Robert L. Fusaro and Lewis Research Center (page images at HathiTrust)
NASA TN D-5839 (National Aeronautics and Space Administration, 1970), by Harold Shapiro, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Adhesion of polymers to tungsten as studied by field ion microscopy (National Aeronautics and Space Administration ;, 1971), by William A. Brainard, Donald H. Buckley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
Scanning electron microscope study of polytetrafluoroethylene sliding on aluminum single crystals (National Aeronautics and Space Administration ;, 1973), by William A. Brainard, Donald H. Buckley, and Lewis Research Center (page images at HathiTrust)
NASA TN D-6353 (National Aeronautics and Space Administration ;, 1971), by William R. Jones, Robert L. Johnson, William F. Hady, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
Concrete-polymer materials : first topical report (Brookhaven National Laboratory ;, 1968), by Meyer Steinberg, United States. Office of Saline Water, U.S. Atomic Energy Commission. Division of Isotopes Development, United States. Bureau of Reclamation. Denver Office. Division of Research, and Brookhaven National Laboratory. Department of Nuclear Engineering (page images at HathiTrust)
Polymer injection for drag reduction (Naval Ship Research and Development Center, 1972), by J. Paul Tullis, Lance F. Lindeman, and Naval Ship Research and Development Center (page images at HathiTrust)
Kolloid-Zeitschrift und Zeitschrift für Polymere. Supplementa (D. Steinkopff., 1909), by Kolloid-Gesellschaft (page images at HathiTrust; US access only)
Investigation of colorless and water-based concrete curing compounds (Vicksburg, Miss., 1969), by C. F. Derrington (page images at HathiTrust)
Laboratory and field evaluation of polymeric cavitation erosion-resistant materials on concrete (U.S. Waterways Experiment Station, 1976), by Tony B. Husbands, Leonard Pepper, and United States Army Corps of Engineers (page images at HathiTrust)
Incremental cost, weight and leadtime impacts of adding improved padding to motor vehicle interiors. Final report. (1994), by K. W. Rutland, B. C. Spinney, J. S. Clements, and C. Westphal (page images at HathiTrust)
Modification of textile fiber properties by radiation-induced graft polymerization (Washington, D.C. : Department of Commerce, Office of Technical Services, 1962., 1962), by Arthur A. Armstrong, William K. Walsh, U.S. Atomic Energy Commission. Office of Isotopes Development, and North Carolina State College (page images at HathiTrust)
Radiation-induced reactions in swollen polymers (Washington, D.C. : Office of Technical Services, Department of Commerce, 1962., 1963), by Zoila Reyes, U.S. Atomic Energy Commission. Division of Isotopes Development, and Stanford Research Institute (page images at HathiTrust)
Radiation-induced reactions in swollen polymers (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service Extension, 1962., 1962), by M. A. Golub, R. L. Walrath, and U.S. Atomic Energy Commission. Division of Isotopes Development (page images at HathiTrust)
PBI reverse osmosis membrane for chromuim plating rinse water (Environmental Protection Agency, Office of Research and Development, Industrial Environmental Research Laboratory ;, 1978), by Howard J. Davis, Joseph R Leal, Frank S Model, and Ohio) Industrial Environmental Research Laboratory (Cincinnati (page images at HathiTrust)
Design of continuously reinforced concrete pavements using glass fiber reinforced polymer rebars (Turner-Fairbank Highway Research Center ;, 2005), by Jeong-Hoon Choi, Roger H. L. Chen, Turner-Fairbank Highway Research Center, and West Virginia University. Department of Civil and Environmental Engineering (page images at HathiTrust)
Radiation polymerization of acetylene derivatives : final report (Monsanto Research Corp., Dayton Laboratory, 1962), by Mark Elias Gutzke, W. M. Yanko, and Monsanto Research Corporation (page images at HathiTrust; US access only)
Contact angles between water and some polymeric materials (U. S. Army Snow Ice and Permafrost Research Establishment, Corps of Engineers, 1957), by H. H. G. Jellinek (page images at HathiTrust)
Evaluation of the Storms Pool Improved Waterflood Project ; topical report (United States Department of Energy, Bartlesville Project Office ;, 1986), by Douglass K. Norton, Dwight L. Dauben, United States. Department of Energy. Bartlesville Project Office, and Inc Keplinger Technology Consultants (page images at HathiTrust)
Commercial scale demonstration [of] enhanced oil recovery by micellar-polymer flood : annual report for the period October, 1981-September, 1982 (Bartlesville Energy Technology Center] ;, 1983), by J. C. Howell and Bartlesville Energy Technology Center (page images at HathiTrust)
Life's little ironies; a set of tales with some colloquial sketches, entitled, A few crusted characters (Harper & Bros., 1912), by Thomas Hardy (page images at HathiTrust)
Anion exchange of 58 elements in hydrobromic acid and in hydriodic acid (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1978., 1978), by S. F. Marsh, J. E. Alarid, J. E. Rein, M. J. McLeod, C. F. Hammond, F. R. Roensch, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
The Effect of radiation on the mechanical properties of polymers : unclassified literature 1955 to October, 1963 (Albequerque, New Mexico : Sandia Corporation, Sandia Laboratories, 1964., 1964), by R. K. Traeger, U.S. Atomic Energy Commission, and Sandia Laboratory (page images at HathiTrust)
Research on boron polymers : literature survey (Wright-Patterson Air Force Base, Ohio : Materials Laboratory, Wright Air Development Center, Air Research and Development Command, United States Air Force, 1955., 1955), by William L. Ruigh, Charles E. Erickson, Wright Air Development Center, and United States. Air Force. Air Research and Development Command (page images at HathiTrust)
Research on boron polymers : Part II, Polymer studies (Wright-Patterson Air Force Base, Ohio : Materials Laboratory, Wright Air Development Center, Air Research and Development Command, United States Air Force, 1955., 1955), by William L. Ruigh, Michael Sedlak, Frank Gunderloy, Charles E. Erickson, Wright Air Development Center, and United States. Air Force. Air Research and Development Command (page images at HathiTrust)
Materials analytical research (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Research and Technology Division, AIr Force Systems Command, United States Air Force, 1963., 1963), by Michael Hoch, Air Force Materials Laboratory (U.S.), United States. Air Force. Systems Command. Aeronautical Systems Division, and University of Cincinnati (page images at HathiTrust)
Rapid methods to estimate the molecular weight distributions of polymers (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, xxxx., 1962), by Richard G. Griskey, Siu-Yuen Fok, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and University of Cincinnati (page images at HathiTrust)
Control of sewer overflows by polymer injection (Cincinnati, Ohio : Municipal Environmental Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1977., 1977), by R. W. Chandler, W. R. Lewis, United States. Environmental Protection Agency. Office of Research and Development, and Municipal Environmental Research Laboratory. Storm and Combined Sewer Section (page images at HathiTrust)

More items available under narrower terms.

Help with reading books -- Report a bad link -- Suggest a new listing

Home -- Search -- New Listings -- Authors -- Titles -- Subjects -- Serials

Books -- News -- Features -- Archives -- The Inside Story

Edited by John Mark Ockerbloom (onlinebooks@pobox.upenn.edu)
OBP copyrights and licenses.