The Online Books Page

Shear (Mechanics)

See also what's at Wikipedia, your library, or elsewhere.

• Deformations (Mechanics)
• Elasticity
• Strains and stresses

• Shear flow
• Shear strength of soils
• Wind shear

• Shear lag
• Shearing (physics)

• Final report on the investigation of the shear strength of concrete frame members without web reinforcement, by I. M. Viest and JoDean Morrow. Conducted under the auspices of the Engineering Foundation through the Reinforced Concrete Research Council. (Urbana, Dept. of Theoretical and Applied Mechanics, Engineering Experiment Station, University of Illinois, 1955), by Ivan M. Viest (page images at HathiTrust)
• Moments and shears in a force fitted rectangular plate, general model. Douglas report SM-42391. Prepared by G. Stoffmacher, Space Strength Section. Prepared under the sponsorship of the Douglas Aircraft Company, Independent Research and Development Program, Account no. 81295-354. ([Santa Monica, Calif.] Space Systems Engineering, Missile & Space Systems Division, Douglas Aircraft Co., Inc., 1962), by Inc. Missile and Space Systems Division Douglas Aircraft Company (page images at HathiTrust)
• Borehole shear tester : equipment and technique / ([Washington, D.C.] : United States Dept. of the Interior, Bureau of Mines, [1982]), by Khamis Y. Haramy (page images at HathiTrust)
• Stressed-skin panel deflections and stresses / (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1975), by Edward W. Kuenzi, John J. Zahn, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Bed shear stress coefficient within the surf zone / (Monterey, Calif. : Naval Postgraduate School, 1977), by Carlos Severino Veitia Garcia (page images at HathiTrust)
• Racking performance of light-frame walls sheathed on two sides / (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1984]), by Marcia Patton-Mallory, Lawrence A. Soltis, Richard M. Gutkowski, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Simplified method for calculating shear deflections of beams / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, [1970]), by Ivan Orosz, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Engineering and design : design of structures to resist the effects of atomic weapons : shear wall structures. (Washington : U.S. Govt. Print. Off., 1958), by United States Army Corps of Engineers (page images at HathiTrust)
• "Shear dispersion" in time-varying flows / (Boulder, Colo. : Environmental Research Laboratories, Atlantic Oceanographic and Meteorological Laboratories, 1977), by W. C. Thacker and Atlantic Oceanographic and Meteorological Laboratories (page images at HathiTrust)
• Analysis of bonded joints / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by S. Srinivas and Langley Research Center (page images at HathiTrust)
• Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991), by William L. Ko, Raymond H. Jackson, and Dryden Flight Research Facility (page images at HathiTrust)
• Comparison of polyester, film-yarn composite, balloon materials subjected to shear and biaxial loading / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by R. J. Niccum, Langley Research Center, and G.T. Schjeldahl Company (page images at HathiTrust)
• New generalized rheological model for lubrication of a ball spinning in a nonconforming groove / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Charles W. Allen, Erwin V. Zaretsky, Dennis P. Townsend, and Lewis Research Center (page images at HathiTrust)
• Shear-stress intensity factors for elastic sheets with cover plates / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by W. B. Fichter and Langley Research Center (page images at HathiTrust)
• Mixed formulation for frictionless contact problems / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Ahmed Khairy Noor and Kyun O. Kim (page images at HathiTrust)
• Supersonic flutter of panels loaded with inplane shear / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by James Wayne Sawyer and Langely Research Center (page images at HathiTrust)
• Effect of adsorbed chlorine and oxygen on shear strength of iron and copper junctions / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Donald R. Wheeler and Lewis Research Center (page images at HathiTrust)
• A novel method of testing the shear strength of thick honeycomb composites / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, VA : For sale by the National Technical Information Service, 1991), by A. J. Hodge, A. T. Nettles, and George C. Marshall Space Flight Center (page images at HathiTrust)
• Theoretical study of corrugated plates : shearing of a corrugated plate with curvilinear corrugations / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by Lung-Hsiang Wu, Charles Libove, Langley Research Center, and Syracuse University (page images at HathiTrust)
• Pressure-viscosity measurements for several lubricants to 5.5 x 10⁸ newtons per square meter (8 x 10⁴ psi) and 149 ̊C (300 ̊F) / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by William R. Jones and Lewis Research Center (page images at HathiTrust)
• Shear-flexible finite-element models of laminated composite plates and shells / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Ahmed Khairy Noor, Michael D. Mathers, and Langley Research Center (page images at HathiTrust)
• Strength of concrete in shear and compression / (1906), by Julius Ernest Schoeller and Norman Edward Seavert (page images at HathiTrust; US access only)
• Shearing strength of concrete / (1907), by Ivan Guy Harmon (page images at HathiTrust; US access only)
• Adiabatic shear bands in simple and dipolar plastic materials / (Aberdeen Proving Ground, Md. : US Army Ballistic Research Laboratory, [1987]), by Thomas W Wright and R. C Batra (page images at HathiTrust)
• Effect of unbonded joints in an aluminum honeycomb-core material for sandwich constructions / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1952]), by C. B. Norris, University of Wisconsin, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Stability of a few curved panels subjected to shear / (Madison, Wis. : United States Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1947]), by Edward W. Kuenzi, Forest Products Laboratory (U.S.), and University of Wisconsin (page images at HathiTrust)
• The distribution of boundary shear stresses in curved trapezoidal channels / (Cambridge : The Laboratory, 1960), by Massachusetts Institute of Technology. Hydrodynamics Laboratory and Arthur T. Ippen (page images at HathiTrust)
• Shear design of wood beams : state of the art / (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1988), by Lawrence A. Soltis, Terry D. Gerhardt, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Shear deflection in timber beams and a method for the determination of shear moduli / (Lafayette, Ind. : Purdue University Agricultural Experiment Station, 1953), by Byron M. Radcliffe (page images at HathiTrust; US access only)
• Investigation of punchability tests for electrical steels. [Final report on development of a punchability rating method for electrical steels, for the Research Fund of American Society of Tool and Manufacturing Engineers, (Detroit, ASTME Research Fund, 1961), by John E. Biegel (page images at HathiTrust)
• Strength and stiffness of uniaxially tensioned reinforced concrete panels subjected to membrane shear/ (1981), by Said Ibrahim Hilmy (page images at HathiTrust; US access only)
• Linearized theory of stagnation region skin friction and mass transfer at hypersonic speeds / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by Kenneth K. Yoshikawa, Ames Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Extension of Preston's shear measurement technique to rough boundaries / (1962), by L. Hwang (page images at HathiTrust; US access only)
• A contribution to the theory of folding deformations in expandable structures with a particular application to toroidal shells / (Washington, D.C. : National Aeronautics and Space Administration, 1962), by H. U. Schuerch, G. M. Schindler, Astro Research Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Shear-pin joints with 2x4, 2x6, and 2x8 lumber for axial loading / (Lafayette, Ind. : Purdue University Agricultural Experiment Station, 1958), by Robert Henry Perkins and Stanley K. Suddarth (page images at HathiTrust; US access only)
• Linear instability of curved free shear layers / (Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1993), by William W. Liou and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Correlation of ideal and actual shear strengths of metals with their friction properties / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by Kazuhisa Miyoshi, Donald H. Buckley, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Advanced beaded and tubular structural panels / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]), by Max D. Musgrove, Bruce E. Greene, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
• Dynamic response of high-frequency pressure transducers to large amplitude sinusoidal pressure oscillations / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by Richard E. Robinson, Lewis Research Center, and Battelle Memorial Institute (page images at HathiTrust)
• Approximate relations for laminar heat-transfer and shear-stress functions in equilibrium dissociated air / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by Ernest V. Zoby, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Weak locally homogeneous turbulence and heat transfer with combined two-dimensional shear and normal strain / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1967]), by Robert G. Deissler, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Combined compressive and shear buckling analysis of hypersonic aircraft structural sandwich panels / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1991), by William L. Ko, Raymond H. Jackson, and Dryden Flight Research Facility (page images at HathiTrust)
• Postbuckling response of long thick isotropic plates loaded in compression including higher order transverse shearing effects / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Manuel Stein, P. Daniel Sydow, Liviu Librescu, and Langley Research Center (page images at HathiTrust)
• Theoretical study of corrugated plates : shearing of a trapezoidally corrugated plate with through lines permitted to curve / (Washington, D.C. : National Aeronautics and Space Administration, 1971), by Chuan-jui Lin, Charles Libove, United States. National Aeronautical and Space Administration, Syracuse University, and Langley Research Center (page images at HathiTrust)
• Mathematical modeling of damage in unidirectional composites / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by J. G. Goree, Walter F. Jones, Lokeswarappa R. Dharani, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Shear-lag analysis of a hybrid, unidirectional composite with fiber damage / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by J. G. Goree, Lokeswarappa R. Dharani, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Analysis of graphite/polyimide rail shear specimens subjected to mechnaical and thermal loading / ([Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1979), by Terry A. Weisshaar, Ramon Garcia, Virginia Polytechnic Institute and State University, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Deformation measurements of composite multi-span beam shear specimens by moire interferometry / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1984), by Daniel Post, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Minimum-mass design of filamentary composite panels under combined loads : design procedure based on simplified buckling equations / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by W. Jefferson Stroud, Nancy Agranoff, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Generalized ring stiffness matrix for ring-stiffened shells of revolution / (Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1970), by George E. Weeks, Joseph E. Waltz, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Mechanical resonance dispersion and stress-strain behavior of several ionic single crystals / (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1965]), by Edward R. Gotsky, Carl A. Stearns, and Lewis Research Center (page images at HathiTrust)
• Possible relation of friction of copper-aluminum alloys with decreasing stacking-fault energy / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1967), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• Tables for the computation of the shear modulus : and Young's modulus of elasticity from the resonant frequencies of rectangular prisms / (Niagara Falls : The Carborundum Company, Research and Development Division, Applied Research Branch, 1961), by N.Y.) Carborundum Company (Niagara Falls and D.P.H. Hasselman (page images at HathiTrust; US access only)
• Shear and rotary inertia effects on beam vibrations / (Washington, D.C. : David Taylor Model Basin, 1964), by Ralph C. Leibowitz, E. H. Kennard, and David W. Taylor Model Basin. Acoustics and Vibration Laboratory (page images at HathiTrust)
• Tearing instability analysis handbook : formulas and curves / (Washington : The Commission, 1980), by Hiroshi Tada, P. C. Paris, Mo.). Center for Fracture Mechanics Washington University (Saint Louis, and U.S. Nuclear Regulatory Commission. Division of Operating Reactors (page images at HathiTrust)
• Analysis of shear transfer in reinforced concrete with application to containment wall specimens / (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service [distributor], 1979), by P. Leombruni, J. J. Connor, O. Buyukozturk, Massachusetts Institute of Technology, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Some elementary principles of shell stress analysis with notes on the use of the shear center / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Paul Kuhn and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strength and stiffness of tensioned reinforced concrete panels subjected to membrane shear, two-way reinforcing / (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1980), by P. C. Perdikaris, Peter Gergely, Richard N. White, Cornell University. Department of Structural Engineering, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Shear tests of graphite / (Upton, N. Y., Brookhaven National Laboratory, 1950), by J. O. Jeffrey, D. F. Gunder, J. R. Moynihan, U.S. Atomic Energy Commission, and Brookhaven National Laboratory (page images at HathiTrust)
• Growth of disturbances in a flame-generated shear region / (Washington, D.C. : National Advisory Committee for Aeronautics, [1956]), by Perry L. Blackshear and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of high shear rate on erosion of common bearing metals / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by Charles D. Strang, Thomas P. Clark, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Further results on the subject of tearing instability / (Washington, D.C. : Division of Operating Reactors, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission.: Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service [distributor], 1980), by P. C. Paris, Hiroshi Tada, U.S. Nuclear Regulatory Commission. Division of Operating Reactors, and Mo.). Center for Fracture Mechanics Washington University (Saint Louis (page images at HathiTrust)
• Borehole shear tester : equipment and technique / (Washington D.C. : United States Department of the Interior, Bureau of Mines, 1981), by Khamis Y. Haramy and United States Bureau of Mines (page images at HathiTrust)
• Numerical exploration of shear-fracture-related rock bursts using a strain-softening constitutive law / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, [1991]), by J. K. Whyatt and M. P. Board (page images at HathiTrust)
• Influence of alloying upon grain-boundary creep / (Washington, D.C. : National Advisory Committee for Aeronautics, [1956]), by F. N. Rhines, M. A. Kissel, W. E. Bond, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Contributions of a wall shear stress to the Magnus effect on nose shapes /, by Ira D. Jacobson, U.S. Army Ballistic Research Laboratory, and University of Virginia (page images at HathiTrust)
• On the stability of stiffened plates / (Washington, D.C. : U.S. Experimental Model Basin, Navy Yard, 1935), by Stephen Timoshenko, Dwight F. Windenburg, M.C. Roemer, and U.S. Experimental Model Basin (page images at HathiTrust)
• In situ tests for the determination of rock mass shear strength, (Vicksburg, Miss., U.S. Army Engineer Waterways Experiment Station, Soils and Pavements Laboratory, 1972), by T. W. Zeigler and Waterways Experiment Station (U.S.). Soils and Pavements Laboratory (page images at HathiTrust)
• Strength tests on paper cylinders in compression, bending, and shear / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1931), by Richard V. Rhode, Eugene E. Lundquist, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Shear-lag tests of a box beam with a highly cambered cover in tension / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by James P. Peterson, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of shear stress on dynamic bulk modulus of sand / (Vicksburg, Miss. : The Station, [1978]), by John H. Schmertmann, University of Florida. Department of Civil Engineering, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• The effect of rate of shearing deformation on the shearing resistance of a cohesionless soil / (Albuquerque, New Mexico : Sandia Laboratories, [1967]), by H. G. Larew, Kenan Atakol, U.S. Atomic Energy Commission, University of Virginia. Research Laboratories for the Engineering Sciences, and Sandia Corporation (page images at HathiTrust; US access only)
• On the determination of twin indices /, by E. J. Rapperport, W. L. Lees, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Shear deformation of upper mantle mineral analogues : tests to 55 kb at 27 degrees C /, by Robert E. Riecker and K. E. Seifert (page images at HathiTrust)
• Elastic-plastic deformation of a single grooved flat plate under longitudinal shear /, by Michael F. Koskinen, issuing agency United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processesd States. sponsor, and Massachusetts Institute of Technology. |b Department of Mechanical Engineering. sponsor (page images at HathiTrust)
• On design of off-axis specimens /, by Raghbir Singh Sandhu, George Peter Sendeckyj, sponsor Air Force Flight Dynamics Laboratory (U.S.), sponsor Air Force Wright Aeronautical Laboratories, and Inc. Analytical Methods (page images at HathiTrust)
• Horizontal shear testing of woven fiberglass/epoxy composites /, by Robert T. Achard, issuing body Air Force Wright Aeronautical Laboratories, and sponsor Air Force Flight Dynamics Laboratory (U.S.) (page images at HathiTrust)
• Shear layer breakdown in compressible flow /, by J. D. A. Walker, Lehigh University. Department of Mechanical Engineering and Mechanics. sponsor, and United States. Air Force. Office of Scientific Research. issuing body (page images at HathiTrust)

More items available under narrower terms.