The Online Books Page

Spectrophotometer -- Standards

See also what's at your library, or elsewhere.

• Spectrophotometer
• Standards

• Metal-on-quartz filters as a standard reference material for spectrophotometry--SRM 2031 (U.S. Dept. of Commerce, National Bureau of Standards :, 1980), by Radu Mavrodineanu and John Raymond Baldwin (page images at HathiTrust)
• Glass filters as a standard reference material for spectrophotometry : selection, preparation, certification, use SRM 930 (U.S. Dept. of Commerce, National Bureau of Standards :, 1975), by Radu Mavrodineanu and John Raymond Baldwin (page images at HathiTrust)
• Didymium glass filters for calibrating the wavelength scale of spectrophotometers--SRM 2009, 2010, 2013, and 2014 (U.S. Dept. of Commerce, National Bureau of Standards :, 1979), by William H. Venable and Kenneth L. Eckerle (page images at HathiTrust)
• Spectral reflectance (U.S. Dept. of Commerce, National Bureau of Standards, 1987), by Victor R. Weidner, J. J. Hsia, and United States. National Bureau of Standards (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Standard quartz cuvettes for high accuracy spectrophotometry (National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1973), by Radu Mavrodineanu and J. W. Lazar (page images at HathiTrust)
• Absorption spectrophotometry. (Macmillan, 1958), by G. F. Lothian (page images at HathiTrust)
• The quantitation of mixtures of hemoglobin derivatives by photoelectric spectrophotometry. (Thomas, 1951), by Francis Tennery Hunter (page images at HathiTrust; US access only)
• Monitoring mercury vapor near pollution sites ([U.S. Environmental Protection Agency]; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1972), by inc Environmental Measurements, Lee Langan, Anders F Jepsen, and United States. Environmental Protection Agency. Office of Research and Monitoring (page images at HathiTrust)
• Modification of a commercial atomic absorption spectrophotometer for cold-vapor determination of mercury (U.S. Dept. of the Interior, Bureau of Mines, 1981), by Joseph A. Perry, A. J. Mackie, and Raymond F. Farrell (page images at HathiTrust)
• Manual of standardized procedures for spectrophotometric chemistry. (New York : Standard Scientific Supply Corporation, [1950]-, 1950), by Harold John Fister (page images at HathiTrust; US access only)
• Development of an NBS reference spectrophotometer for diffuse transmittance and reflectance (U.S. Dept. of Commerce, National Bureau of Standards, 1976), by William H. Venable, Victor R. Weidner, J. J. Hsia, United States. National Bureau of Standards, and Institute for Basic Standards (U.S.). Optical Physics Division (page images at HathiTrust)
• Design, construction, and testing of a new high accuracy spectrophotometer (U.S. National Bureau of Standards :, 1972), by K. D. Mielenz and Kenneth L. Eckerle (page images at HathiTrust)
• Spektrofotometriska undersökningar över diffusa ämnens absorption. (Uppsala, 1912), by Ernst Lundholm (page images at HathiTrust; US access only)
• A pocket spectrophotometer (U.S. Dept. of Commerce and Labor, Bureau of Standards :, 1906), by P. G. Nutting and United States. National Bureau of Standards (page images at HathiTrust)
• A photometric attachment for spectroscopes (U.S. Dept. of Commerce and Labor, Bureau of Standards :, 1911), by P. G. Nutting and United States. National Bureau of Standards (page images at HathiTrust)
• Spectrophotometer-integrating-sphere system for computing solar absorptance (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1991), by William G. Witte, John E. Perry, Wayne S. Slemp, and Langley Research Center (page images at HathiTrust)
• Total ozone measurement : intercomparison of prototype New Zealand filter instrument and Dobson spectrophotometer (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1978), by Reid E. Basher and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Error analysis of Dobson spectrophotometer measurements of the total atmospheric ozone content (National Aeronautics and Space Administration, 1975), by Alfred C. Holland and Robert W. L. Thomas (page images at HathiTrust)
• Rocket spectrophotometer airglow measurements in the far ultraviolet (National Aeronautics and Space Administration, 1964), by W. G. Fastie, D. F. Heath, H. M. Crosswhite, Johns Hopkins University, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• A study of a sector spectrophotometer and auroral 0+(²P-²D) emissions (National Aeronautics and Space Administration ;, 1976), by Gary R. Swenson (page images at HathiTrust)
• A battery charger and control circuit for the Beckman spectrophotometer (United States Atomic Energy Commission, Technical Information Service, 1950), by Robert Wellnitz, Anthony R. Ronzio, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Ein neues spectralphotometer. ([s.n., 1894), by Arthur König (page images at HathiTrust)
• Whole-body nuclear magnetic resonance spectrometer (Los Alamos Scientific Laboratory of the University of California, 1968), by Jasper A. Jackson, Wright H. Langham, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Spectrophotometric study of the gaseous equilibrium of cadmium and cadmium (II) chloride (Ames Laboratory, Iowa State University of Science and Technology, 1963), by Buddy Leroy Bruner, J. D. Corbett, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Contract 14-19-008-9354 (U.S. Dept. of Interior, Fish and Wildlife Service ;, 1961), by Robert W. Holmes, Robert J. Linn, United States. National Marine Fisheries Service, U.S. Fish and Wildlife Service, Scripps Institution of Oceanography, and United States. Bureau of Commercial Fisheries (page images at HathiTrust)
• Standards for checking the calibration of spectrophotometers (200 to 1000 mu). (U.S. Dept. of Commerce, National Bureau of Standards, 1948), by United States. National Bureau of Standards (page images at HathiTrust)
• Modification of the Beckman Model DU Spectrophotometer for use as a semi-automatic paper chromatographic strip scanning and recording instrument (Washington, D.C. : Office of Technical Services, Department of Commerce, 1962., 1962), by Frank Ganis, William Kremer, Patrick D. Giunta, Thomas D. Brown, Joe Howland, Franklin Brayer, University of Rochester. Atomic Energy Project, and U.S. Atomic Energy Commission (page images at HathiTrust)
• A universal spectrophotometer for the measurement of the relative spectral distribution of the carbon arc source (Rochester, New York : University of Rochester, Atomic Energy Project, 1954., 1954), by Leo J. Krolak, Thomas P. Davis, and University of Rochester. Atomic Energy Project (page images at HathiTrust)
• Satellite measurements of solar UV during 1974 (Air Force Cambridge Research Laboratories, Air Force Systems Command, United States Air Force, 1976), by James E. Manson and Air Force Cambridge Research Laboratories (U.S.) (page images at HathiTrust)
• Absorption data analysis for EUVS experiment on the satellites AE-C, D, and E (Hanscom AFB, Massachusetts : Air Force Geophysics Laboratory, Air Force Systems Command, United States Air Force, 1979., 1979), by Les M. Chaikin, Katsura Fukui, and U.S. Air Force Geophysics Laboratory (page images at HathiTrust)
• Two approaches to a portable color-measuring system (U.S. Army, Corps of Engineers, Engineer Geodesy, Intelligence and Mapping Research and Development Agency, 1966), by Kenneth D. Robertson and Intelligence United States. Army. Geodesy (page images at HathiTrust)
• Evaluation of the LASL automated spectrophotometer for uranium determination at submilligram levels (Los Alamos, New Mexico : Los Alamos Scientific Laboratory of the University of California, 1977., 1977), by R. M. Hollen, J. E. Rein, D. D. Jackson, United States. Energy Research and Development Administration, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Infrared data processor (Wright-Patterson Air Force Base, Ohio : Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1963., 1963), by Neil T. McDevitt, International Telephone and Telegraph Corporation, United States. Air Force. Systems Command. Aeronautical Systems Division, United States. Air Force. Systems Command. Aeronautical Systems Division. Directorate of Materials and Processes, and Aeronautical Systems Division (U.S.) (page images at HathiTrust)
• Transmittance of the visible spectrum through the components of the bovine ocular media (Wright-Patterson Air Force Base, Ohio : Wright Air Development Division, Air Research and Development Command, United States Air Force, 1961., 1961), by Donald G. Pitts, Human Factors and Ergonomics Collection, United States. Air Force. Air Research and Development Command, and United States. Wright Air Development Division (page images at HathiTrust)

• Bibliography of photoelectric spectrophotometric methods of analysis for inorganic ions, covering the Analytical edition of Industrial and engineering chemistry, vol. 1 through Analytical chemistry, vol. 23, no. 10 (1951) and the Analyst, vol. 62 through vol. 76, no. 906 (1951) (American Society for Testing Materials, 1952), by Jesse Wilbur Stillman, D. D. Bly, M. G. Mellon, and Edward C. Dunlop (page images at HathiTrust)
• Bibliography of photoelectric spectrophotometric methods of analysis for inorganic ions. Supplement. 1959- (American Society for Testing Materials, 1959), by Jesse Wilbur Stillman, D. D. Bly, M. G. Mellon, and Edward C. Dunlop (page images at HathiTrust)

• Regular spectral transmittance (U.S. Dept. of Commerce, National Bureau of Standards, 1987), by Kenneth L. Eckerle and United States. National Bureau of Standards (page images at HathiTrust)

• Desk and power supply for the Beckman spectrophotometer (Oak Ridge, Tennessee : U.S. Atomic Energy Commission,Technical Information Service, 1951., 1951), by Anton B. Carlson, Charles V. Banks, A. S. Ayers, Iowa State College, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)

• Modification of an NBS reference spectrophotometer (U.S. Dept. of Commerce, National Bureau of Standards, Institute for Basic Standards :, 1976), by Kenneth L. Eckerle and Institute for Basic Standards (U.S.) (page images at HathiTrust)

• A null balance x-ray absorption instrument for chemical process monitoring (U.S. Atomic Energy Commission, 1959), by B. E. Dozer, United States. National Bureau of Standards, United States. Department of Energy. Office of Fusion Energy, United States. National Bureau of Standards. Fracture and Deformation Division, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)

• A slotted-cylinder velocity selector for neutron research (Lawrence Radiation Laboratory, 1961), by Myron Ruderman, William C. Dickinson, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Time-of-flight studies of electrons in vacuum (Oak Ridge National Laboratory, 1964), by D. A. LaBar, R. D. Birkhoff, J. A. Harter, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Health Physics Division (page images at HathiTrust)
• A computer method for determining by least squares gamma ray relative intensities using a bent-crystal monochromator (Ames Laboratory, 1964), by Joseph Emerson Brown, E. N. Hatch, U.S. Atomic Energy Commission, and Ames Laboratory (page images at HathiTrust)
• Monochromator wavelength modulator (Princeton University Plasma Physics Laboratory, 1963), by Arthur F. Kuckes, U.S. Atomic Energy Commission, and Princeton University. Plasma Physics Laboratory (page images at HathiTrust; US access only)

• National Highway Safety Program Management and Reporting System. Volume I (1969) (page images at HathiTrust)
• National Highway Safety Program Management and Reporting System. Volume II (1969) (page images at HathiTrust)
• National Highway Safety Program Management and Reporting System. Volume III (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. II - cost estimates. Final report. (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. III - appendices. Final report. (1969) (page images at HathiTrust)
• Motor vehicle standards cost estimating system. Vol. IV - MVSPS cost estimator's guide. Final report. (1969) (page images at HathiTrust)
• The organization and program structure of the National Highway Safety Bureau. (1967), by Robert Brenner and 1st annual meeting Federal Highway Administration (page images at HathiTrust)
• Determination of the tradeoffs between safety, weight, and cost of possible improvements to vehicles structure and restraints. Final report. (1974), by G. H. Alexander, R. E. Conrad, and M. R. Neale (page images at HathiTrust)
• Analytical methods and design implications of deterministic ride quality criteria. Final report. (1975), by J. K. Hedrick, R. C. White, and H. Firouztash (page images at HathiTrust)
• Model police traffic services procedures (1975) (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
• Evaluation of benefits to the federal highway program provided by regulation of vehicle noise emissions. (1976), by N. P. Miller, P. C. Fano, T. J. Rosalanko, and H. B. Darcy (page images at HathiTrust)
• A manual of police traffic services, rules (1976) (page images at HathiTrust)
• The contributions of automotive regulation. Preliminary report. (1978) (page images at HathiTrust)
• Automobile fuel economy contractors' coordination meeting - summary report. (1978), by Contractors' Coordination Meeting Automotive Fuel Economy Research and Analysis Program (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Volume II: appendices. Final report. (1978), by R. F. McLean, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Vehicle anti-theft security system design. Volume II: technical report. Final report. (1978), by John S. Howland (page images at HathiTrust)
• Vehicle anti-theft security system design. Volume I: summary report. Final report. (1978), by John S. Howland (page images at HathiTrust)
• Final assessment of the bumper standard. (1979) (page images at HathiTrust)
• Final assessment of the bumper standard. Executive summary. (1979) (page images at HathiTrust)
• Development of standards and tests for acceptance of traffic signal lenses. Final report. (1979), by David F. King (page images at HathiTrust)
• An evaluation of standard 214. Technical report. (1979), by Charles Jesse Kahane (page images at HathiTrust)
• Evaluation plan for Federal Motor Vehicle Safety Standard 208 occupant crash protection. (1979) (page images at HathiTrust)
• Cost evaluation for four federal motor vehicle safety standards. Task VI additional bumpers, FMVSS 215 - exterior protection. Final report. (1978), by M. R. Harvey, C. B. Eckel, and David Cowan (page images at HathiTrust)
• Study of the effects of applying federal motor vehicle safety standard 201 to light trucks and vans. Modification No. 2. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
• Study of the effects of applying federal motor vehicle safety standards 203 & 204 to light trucks and vans. Modification No. 3. Final report. (1979), by R. F. Mc Lean (page images at HathiTrust)
• Passenger car/pedestrian impact protection system evaluation. Final report. (1979), by R. McLean, L. A. C. Barbarek, and O. J. Viergutz (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards: Task VIII - FMVSS 301, fuel system integrity - determination of the model year when manufacturers made changes to meet Standard's 1976 requirements. Final report. (1979), by R. F. McLean and G. Lisiecki (page images at HathiTrust)
• Calculations and supporting material for the preliminary analysis of the bumper standard. (1979) (page images at HathiTrust)
• Comments of Houdaille industries on the bumper standard. (1979) (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards - Vol. V. - FMVSS 213. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume I: FMVSS 105. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume II: FMVSS 108. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume III: FMVSS 122. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume IV: FMVSS 202 and 207. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume VI: FMVSS 220, 221 and 222. Final report. (1979), by M. R. Harvey, J. A. Lesczhik, and R. F. McLean (page images at HathiTrust)
• Cost evaluation for nine Federal Motor Vehicle Safety Standards - Task IX: FMVSS 214, side door strength, identification and cost evaluation of design and manufacturing changes. Final report. (1979), by M. R. Harvey and C. B. Eckel (page images at HathiTrust)
• Review of procedures for determining corporate average fuel economy - Volume I: executive summary. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
• Review of procedures for determining corporate average fuel economy - Volume II: technical report. Final report. (1979), by F. T. Rabe (page images at HathiTrust)
• Cost and economic impact of tire reserve load requirements. Final report. (1980), by O. J. Viergutz, S. Marek, C. Kelley, and H. Wakeley (page images at HathiTrust)
• Cost evaluation for three Federal Motor Vehicle Safety Standards - FMVSS 203, 204, and 212. Final report. (1980), by R. F. McLean, C. B. Eckel, and J. A. Lesczhik (page images at HathiTrust)
• Side impact conference. (Government Printing Office, Washington, D.C., 1980), by 31 Jan 1980-1 Feb 1980 Side Impact Conference (page images at HathiTrust)
• An evaluation of Federal Motor Vehicle Safety Standards for passenger car steering assemblies. Standard 203 - impact protection for the driver. Standard 204 - rearward column displacement. (1981), by Charles Jesse Kahane (page images at HathiTrust)
• Emergency medical services communications design manual. Final report. (1980), by C. Davis, Sandra Callahan, and F. Pethel (page images at HathiTrust)
• Implementation analysis for daytime headlamp use. Final report. (1980), by D. M. Teague, L. E. Rohter, Leonard P. Gau, H. G. Wakeley, and O. J. Viergutz (page images at HathiTrust)
• FMVSS no. 208 extension to light trucks, vans, and MPV's - cost/leadtime study. Final report. (1981), by R. Schwarz (page images at HathiTrust)
• Multipiece rims for trucks, buses, and trailers - economic effects caused by further regulation of rims in Standard No. 120. Final report. (1981), by R. W. Gaines (page images at HathiTrust)
• Review and evaluation of automotive fuel conservation technologies. Final summary report. (1981), by S. Marek, L. Rohter, and O. J. Viergutz (page images at HathiTrust)
• Model police traffic services directives (policy, procedures, rules) for police executives. Final report. (1981), by R. H. Sosktowski, W. J. Nash, and R. C. Mayer (page images at HathiTrust)
• Final regulatory analysis of the model year 1982 light truck fuel economy standards. (1980) (page images at HathiTrust)
• An evaluation of head restraints - Federal Motor Vehicle Safety Standard 202. (1982), by Charles Jesse Kahane (page images at HathiTrust)
• Review and evaluation of automotive fuel conservation technologies. Final report. (1981), by H. M. Siegel, R. Schwarz, J. Andon, G. Kollars, T. Gerstenberger, R. Gaines, Ronald Falk, and Stan Renick (page images at HathiTrust)
• Comprehensibility standards for technical manuals. (1978) (page images at HathiTrust)
• Cost evaluation for two Federal Motor Vehicle Safety Standards; FMVSS 113 Hood Latch - Passenger Cars; FMVSS 219 Windshield Zone Intrusion - Passenger Cars. Final report. (1982), by T. N. McVetty, A. J. Cross, and L. W. Parr (page images at HathiTrust)
• Evaluation of Federal Motor Vehicle Safety Standard 301-75, Fuel System Integrity: Passenger Cars. (1983), by G. G. Parsons (page images at HathiTrust)
• An evaluation of side structure improvements in response to Federal Motor Vehicle Safety Standard 214. (1982), by Charles Jesse Kahane (page images at HathiTrust)
• A preliminary evaluation of two braking improvements for passenger cars - dual master cylinders and front disc brakes. (1983), by Charles Jesse Kahane (page images at HathiTrust)
• Consumer cost evaluation of Federal Motor Vehicle Safety Standards - FMVSS 103 and 104. Final report. (1982), by John L. Gilmour (page images at HathiTrust)
• An evaluation of side marker lamps for cars, trucks and buses. (1983), by Charles Jesse Kahane (page images at HathiTrust)
• Feasibility of shipbuilding standards. Executive summary. (1976), by Kevin P. Gildart and James A. Burbank (page images at HathiTrust; US access only)
• Report of Castine Conference: feasibility of shipbuilding standards (1976), by 7-9 June 1976 Feasibility of Shipbuilding Standards Conference (page images at HathiTrust; US access only)
• Final report on a compendium of shipbuilding standards (U.S. Department of Commerce Maritime Administration, 1979), by Corporate-Tech Planning, Bath Iron Works, United States Maritime Administration, and National Shipbuilding Research Program. Task S-20 (page images at HathiTrust)
• Propulsion plant standards feasibility study. Executive summary. (1975) (page images at HathiTrust; US access only)
• Propulsion plant standards feasibility study. Final report. (1975) (page images at HathiTrust; US access only)
• Recommended U.S. shipbuilding standards program long-range plan : final report. (National Shipbuilding Research Program, 1982), by Ishikawajima Jūkōgyō Kabushiki Kaisha, Inc IHI Marine Technology, and National Shipbuilding Research Program (page images at HathiTrust; US access only)
• Consensus QA/QC acceptance standards, Task S-31 of the Ship Producibility Research Program. (1982) (page images at HathiTrust; US access only)
• Standard structural arrangements - a report of research conducted under MARAD Task S-11 of the Ship Producibility Research Program to determine the value of standard structural arrangements. (1978) (page images at HathiTrust; US access only)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume I. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Pre-standard vehicles cost evaluation of the 1982 Part 581 Bumper Standard. Volume II. Final report. (1983), by Norman F. Ludtke and Henry L. Kaminski (page images at HathiTrust)
• Scheduling standards pilot project. Summary report. (1982) (page images at HathiTrust; US access only)
• A manual on planning and production control for shipyard use. (1978) (page images at HathiTrust; US access only)
• Industrial engineering applications in the U.S. shipbuilding industry : May 25, 1982, New Orleans, Louisiana ([Bath Iron Works Corporation?], 1982), by Bath Iron Works, 25 May 1982 Industrial Engineering Application in the U.S. Shipbuilding Industry Symposium, and 25 May 1982 American Institute of Industrial Engineers' Industrial Engineering Conference (page images at HathiTrust; US access only)
• Shipbuilding industry/production engineering workshop. Proceedings. (1978), by 21-24 Feb 1978 Shipbuilding Industrial/Production Engineering Workshop (page images at HathiTrust; US access only)
• Improved planning and production control. (1977) (page images at HathiTrust; US access only)
• Shipyard marking methods. (1980) (page images at HathiTrust; US access only)
• Prefailure evaluation techniques for marine coatings. (1974) (page images at HathiTrust; US access only)
• Surface preparation: a comparative analysis of existing standards - a proposed marine standard. (1983), by L. Jackel (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Executive summary. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Volume 1: report. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Standards. Volume 2: appendices. Final report. (1981) (page images at HathiTrust; US access only)
• Technology Transfer Program (TTP). Quality assurance system. Executive summary. Final report. (1980) (page images at HathiTrust; US access only)
• Japanese technology that could improve U.S. shipbuilding productivity. (1980) (page images at HathiTrust; US access only)
• Mineral slag abrasive survey and specification. (1984) (page images at HathiTrust; US access only)
• Draft U.S. merchant ship bridge design standards - report II. Final report. (1982), by K. L. Marino and R. B. Cooper (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-I (foundation, etc.). (1980) (page images at HathiTrust; US access only)
• Work management manual - steel/aluminum small assembly-II (bulkhead/webs, etc.). (1980) (page images at HathiTrust; US access only)
• Shipbuilding design/production integration workshop. Volume I. Proceedings. (1981), by 18-21 Jan 1981 Shipbuilding Design/Production Integration Workshop (page images at HathiTrust; US access only)
• Determination of volume solids of paints and coatings by accurate dry film thickness measurements. (1981) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume I. (1982) (page images at HathiTrust; US access only)
• Work management manual - main assembly. Volume II. (1982) (page images at HathiTrust; US access only)
• Work management manual - steel shell assembly. (1980) (page images at HathiTrust; US access only)
• Work management manual - electrical installation. Volume II. (1982) (page images at HathiTrust; US access only)
• Work management manual - in-shop blast and paint. (1983) (page images at HathiTrust; US access only)
• Work management manual - material handling for shipyards. (1983) (page images at HathiTrust; US access only)
• Work management manual - hull erection. (1981), by D. Koelling, W. Inman, D. Phillips, and J. Schauske (page images at HathiTrust; US access only)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume I: executive summary. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume III: 1982 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume II: 1982 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume IV: 1983 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume V: 1983 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VI: 1984 domestic models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• Cost estimates of post-standard bumpers for cost evaluation of the 1982 part 581 bumper standard, and cost estimates of post-standard (1984 model year) bumpers for cost evaluation of the 1982 bumper standard. Volume VII: 1984 imported models. Final report. (1984), by Norman F. Ludtke and Gene O. Cowie (page images at HathiTrust)
• A compendium of shipbuilding standards. Interim report on subtask I: regulatory body and classification body shipbuilding standards. (1979) (page images at HathiTrust; US access only)
• A compendium of shipbuilding standards. Interim report on subtask II: industrial standards in shipbuilding use. (1979) (page images at HathiTrust; US access only)
• A compendium of shipbuilding standards. Interim report on subtask III: foreign shipbuilding standards. (1979) (page images at HathiTrust; US access only)
• FY-82 Labor Standards Program - pipe fabricating and blast and paint shops. (1983) (page images at HathiTrust; US access only)
• Work management manual - pipe fabricating shop. (1981), by D. Fulwiler, D. Kressig, and J. Tong (page images at HathiTrust; US access only)
• Back-up data for temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
• Work management manual - general: temporary staging for ground assembly and aboard ship. (1982) (page images at HathiTrust; US access only)
• Temporary staging for shipyards. Final report. (1983) (page images at HathiTrust; US access only)
• An evaluation of windshield glazing and installation methods for passenger cars. (1985), by Charles Jesse Kahane (page images at HathiTrust)
• Estimation of weight and consumer price relating to the implementation of FMVSS 105, 108, 202, 205, and 216 in passenger cars and 201, 203 and 205 in light trucks. Final report. (1982), by R. Gladstone, M. R. Harvey, J. Leschik, and R. McLean (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standards 111, 112, 118 and 124. Appendix B - photographs. Final report. (1983), by G. J. Adams, Lloyd E. Carlson, A. G. Hoffman, and S. Shideh (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume I. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume II. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard 210 - passenger cars and evaluation of cost and weight trends for Standards 201, 203 and 204 - passenger cars. Volume III. Final report. (1985), by W. R. Osen and Norman F. Ludtke (page images at HathiTrust)
• Computerized application of standards. Final report on task ES-8-22. (1985) (page images at HathiTrust; US access only)
• Labor standards application program: electrical trade area. Final report. (1985) (page images at HathiTrust; US access only)
• Product oriented safety and health management. (1986) (page images at HathiTrust; US access only)
• Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 108 and 207. Final report. (1986), by Lloyd E. Carlson and P. Leonard (page images at HathiTrust)
• An evaluation of the bumper standard - as modified in 1982. Technical report. (1987), by Warren G. La Heist and F. G. Ephraim (page images at HathiTrust)
• Cost evaluation of Federal Motor Vehicle Safety Standard (FMVSS) 105-83. Final report. (1985), by G. J. Adams, Lloyd E. Carlson, and B. W. Firth (page images at HathiTrust)
• Engineered labor standards in the manufacture of sheetmetal case good items. Final report. (Bath Iron Works Corp., 1984), by United States Navy, United States. Maritime Administration. Office of Advanced Ship Development, National Shipbuilding Research Program, and Bath Iron Works (page images at HathiTrust; US access only)
• Data development of detail standards for outside machinery operations. (1985) (page images at HathiTrust; US access only)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume I. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume II. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume III. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Cost estimates of automatic crash protection in 1987 model year passenger cars. Volume IV. Final report. (1988), by Anil V. Khadilkar, Gary Fladmark, and B. W. Firth (page images at HathiTrust)
• Manual on uniform traffic control devices for streets and highways. (Government Printing Office, Washington, D.C., 1988) (page images at HathiTrust)
• Motor vehicle regulations. Regulatory cost estimates could be improved. (1992) (page images at HathiTrust)
• Study designs for passing sight distance requirements. Final report. (1992), by Warren Edward Hughes, Sarath C. Joshua, and Hugh W. McGee (page images at HathiTrust)
• Motor vehicle fires in traffic crashes and the effects of the fuel system integrity standard. (1990), by G. G. Parsons (page images at HathiTrust)
• Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume I. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
• Cost estimates of manual and automatic crash protection systems (CP's) in selected 1988-1992 model year passenger cars [brake systems]. Volume II. Final report. (1992), by Gary Fladmark and Anil V. Khadilkar (page images at HathiTrust)
• Cost and leadtime estimates for improved pillar padding, automatic slack adjusters, visual brake adjustment indicators and tractor/trailer ABS connections. Final report. (1994) (page images at HathiTrust)
• [Cost per life saved by the FMVSS] (2004), by Charles Jesse Kahane (page images at HathiTrust)
• Development and current status of the standard nuclear instrument module (NIM) system. (sale by the Supt. of Docs., U.S. Govt. Print. Off., 1970), by Louis Costrell (page images at HathiTrust)
• Standardization of Work Measurement. Volume 2, Clerical and Sales Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 3, Service Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 4, Farming, Fishery, Forestry, and Related Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 5, Processing Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 6, Machine Trades Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 7, Bench Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 8, Structural Work Occupations. (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement, Volume 9, Miscellaneous Occupations (Transportation, Packaging, Materials Handling...). (Defense Technical Information Center, 1977), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Standardization of Work Measurement. Volume 10, Universal, (Common to Two or More Occupations). (Defense Technical Information Center, 1975), by DEPARTMENT OF DEFENSE WASHINGTON DC. (page images at HathiTrust; US access only)
• Computer program for analysis of imperfection sensitivity of ring stiffened shells of revolution (National Aeronautics and Space Administration ;, 1971), by Gerald A. Cohen, Langley Research Center, and Philco-Ford Corporation (page images at HathiTrust)
• La Convention du mètre et le Bureau international des poids et mesures (Gauthier-Villars, 1902), by Ch.-Ed. Guillaume (page images at HathiTrust; US access only)
• Incremental cost, weight and leadtime impacts of adding improved padding to motor vehicle interiors. Final report. (1994), by K. W. Rutland, B. C. Spinney, J. S. Clements, and C. Westphal (page images at HathiTrust)
• On the interior regularity of weak solutions of the navier-stokes equations ([Washington, D.C.] : Mathematics Division, Air Force Office of Scientific Research, 1961., 1961), by J. Serrin, United States. Air Force. Office of Scientific Research, and University of Minnesota. Institute of Technology (page images at HathiTrust)

More items available under broader and related terms at left.