The Online Books Page

Stainless steel -- Electric properties

See also what's at your library, or elsewhere.

• Stainless steel
• Stainless steel -- Properties
• Electric properties

• The EPR method for the detection of sensitization in stainless steels (The Commission :, 1981), by W. L. Clarke, General Electric Company. Nuclear Engineering Division, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Electrical resistivity of electrolytic iron, SRM 797, and austenitic stainless steel, SRM 798, from 5 to 280 K (U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1974), by J. G. Hust (page images at HathiTrust)
• Thermal conductivity and electrical resistivity standard reference materials : austenitic stainless steel, SRM's 735 and 798, from 4 to 1200 K (U.S. Dept. of Commerce, National Bureau of Standards : for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1975), by J. G. Hust and P. J. Giarratano (page images at HathiTrust; US access only)
• Thermal conductivity of austenitic stainless steel, SRM 735, from 5 to 280 K (U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1972), by J. G. Hust and Larry L. Sparks (page images at HathiTrust; US access only)

Items below (if any) are from related and broader terms.

• Stainless steel handbook. (Pittsburgh, 1951), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Stainless steels : an elementary text for consumers. (American Society for Metals, 1949), by Carl Andrew Zapffe (page images at HathiTrust)
• Welding stainless steels. (Allegheny Ludlum Steel Corporation, 1943), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Machining of stainless steels. (New York, 1951), by Metal Cutting Tool Institute (page images at HathiTrust)
• Report on the elevated-temperature properties of stainless steels (American Society for Testing Materials, 1952), by Ward F. Simmons and Howard Clinton Cross (page images at HathiTrust)
• Long-term embrittlement of cast duplex stainless steels in LWR systems : annual report October 1984-September 1985 (The Commission, 1986), by O. K. Chopra, H. Chung, Argonne National Laboratory. Materials Science and Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Benchmark experiments to test plutonium and stainless steel cross sections (The Commission, 1978), by U. P. Jenquin, S. R. Bierman, and Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards (page images at HathiTrust)
• Tendon suture technic with stainless steel wire. (Ethicon, 1963), by Inc. Ethicon (page images at HathiTrust)
• The stainless steel file for root filling : a dissertation submitted in partial fulfillment ... in endodontics and radiology ... (1960), by Gerald C. Dietz and University of Michigan. School of Dentistry (page images at HathiTrust)
• Corrosion phenomenon of endodontic files : a colorimetric analysis : a thesis submitted in partial fulfillment ... endodontics (1973), by Richard Alan Rubinstein and University of Michigan. School of Dentistry (page images at HathiTrust)
• Chromium, nickel, and other alloying elements in U.S.-produced stainless and heat-resisting steel (U.S. Dept. of the Interior, Bureau of Mines, 1991), by John F. Papp (page images at HathiTrust)
• A study of irradiation effects in type "A" nickel and type 347 staineless steel tensile specimens (Argonne National Laboratory, 1960), by S. H. Paine, D. W. Hackett, W. F. Murphy, and U.S. Atomic Energy Comission (page images at HathiTrust)
• Iron-base alloys strengthened by laves phases as substitutes for stainless steels (U.S. Dept. of the Interior, Bureau of Mines, 1980), by J. S. Dunning, W. L. O'Brien, and M. L. Glenn (page images at HathiTrust)
• Electrolytic manganese in open-hearth and Bessemer steel tests at Jones & Laughlin Steel Corp., Pittsburgh, Pa. (U.S. Dept. of the Interior, Bureau of Mines, 1948), by Frederick Sillers (page images at HathiTrust)
• Reduced-chromium stainless steel substitutes containing silicon and aluminum (U.S. Dept. of the Interior, Bureau of Mines, 1984), by M. L. Glenn and D. E. Larson (page images at HathiTrust)
• An iron-aluminum-molybdenum-alloy as a chromium-free stainless steel substitute (U.S. Dept. of the Interior, Bureau of Mines, 1982), by J. S. Dunning (page images at HathiTrust)
• Structural stability and oxidation resistance of substitute alloys with various Cr and Mn levels (U.S. Dept. of the Interior, Bureau of Mines, 1989), by Je M. Oh and M. L. Glenn (page images at HathiTrust)
• Stainless steel-gadolinium alloys (U.S. Dept. of the Interior, Bureau of Mines, 1965), by H. Kato, C. Armantrout, W. Barstow, Mark I. Copeland, U.S. Atomic Energy Commission, and United States Bureau of Mines (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Korea : determination of the Commission in investigation no. 731-TA-563 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe from Malaysia : determination of the Commission in investigation no. 731-TA-644 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel flanges from India and Taiwan : determinations of the Commission in investigations no. 731-TA-639 and 640 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from Brazil, France, and India : determinations of the Commission in investigations nos. 731-TA-636-638 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Taiwan : determination of the Commission in investigation no. 731-TA-564 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from India : [investigation no.731-TA-638 (final)] (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel flanges from India and Taiwan (U.S. International Trade Commission, 1994), by United States International Trade Commission (page images at HathiTrust)
• Class 150 stainless steel threaded pipe fittings from Taiwan : [investigation no. 731-TA-658 (preliminary)] (U.S. International Trade Commission, 1993), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe from Malaysia : [investigation no. 731-TA-644 (final)] (U.S. International Trade Commission, 1994), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire rod from Brazil and France : [investigations nos. 731-TA-636 and 637 (final)] (U.S. International Trade Commission, 1994), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel angle from Japan (U.S. International Trade Commission, 1995), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel angles from Japan : [investigation no. 731-TA-699 (preliminary)] (U.S. International Trade Commission, 1994), by United States International Trade Commission (page images at HathiTrust)
• The Sulfex process : terminal development report (U.S. Atomic Energy Commission, 1960), by F. D. Fisher, Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)
• A flux-free method for joining aluminum to stainless steel (U.S. Atomic Energy Commission, 1961), by L. C. Lemon, Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Darex pilot plant studies (U.S. Atomic Energy Commission, 1960), by J. J. Shefcik, Hanford Works, and Hanford Atomic Products Operation. Chemical Research and Development Operation (page images at HathiTrust)
• Dissimilar metal welds of certain superalloys and stainless steels (Hanford Atomic Products Operation, 1963), by R. L. Knecht, U.S. Atomic Energy Commission, Hanford Atomic Products Operation, and Pacific Northwest Laboratory (page images at HathiTrust)
• Some observations of the intergranular corrosion of irradiated type 304 stainless steel (Oak Ridge National Laboratory, 1964), by E. L. Long, C. Michelson, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The corrosion resistance of various stainless steels in aqueous solutions in the pressure of dowex #50 resin (Oak Ridge National Laboratory, 1950), by Arnold R. Olsen, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Technology Division (page images at HathiTrust)
• Decontamination of stainless steel (Oak Ridge National Laboratory, 1955), by David Owen Campbell, U.S. Atomic Energy Commission, and Chemical Development Section Oak Ridge National Laboratory. Chemical Technology Division (page images at HathiTrust)
• Enthalpies and heat capacities of stainless steel (316), zirconium, and lithium at elevated temperatures (Oak Ridge National Laboratory, 1952), by R. F. Redmond, J. Lones, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Experimental Engineering Division (page images at HathiTrust)
• Thorex pilot plant corrosion studies. I, Corrosion of types 304L and 309SCb stainless steel during production and development periods (Oak Ridge National Laboratory, 1959), by J. L. English and U.S. Atomic Energy Commission (page images at HathiTrust)
• Sulfex process : depassivation of stainless steel (Oak Ridge National Laboratory, 1959), by T. A. Gens, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section B. (page images at HathiTrust)
• Carburization and chemical treatments for recovery of uranium from stainless steel fuel elements (Oak Ridge National Laboratory, 1964), by R. E. Adams, E. S. Bomar, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Development of the Sulfex process for decladding stainless-steel-clad power reactor fuel elements with sulfuric acid (Oak Ridge National Laboratory, 1959), by A. H. Kibbey, J. H. Goode, W. E. Clark, J. R. Flanary, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section B. (page images at HathiTrust)
• The effect of irradiation on the corrosion on type 347 stainless steel by uranyl sulfate solutions (Oak Ridge National Laboratory, 1957), by F. H. Sweeton, H. O. Day, M. D. Silverman, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemistry Division (page images at HathiTrust)
• Remote welding of stainless steel containers (Oak Ridge National Laboratory, 1957), by E. E. Pierce, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Operations Division (page images at HathiTrust)
• Summary report : an evaluation of the substitution of zircaloy for stainless steel in N.S. Savannah fuel-element containers (Oak Ridge National Laboratory, 1963), by C. L. Whitmash, L. R. Shobe, L. D. Schaffer, H. C. McCurdy, E. E. Gross, T. D. Anderson, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Nuclear analyses of the N.S. Savannah reactor with Zircaloy or stainless steel as fuel-element containers (Oak Ridge National Laboratory, 1962), by E. E. Gross, B. W. Colston, M. L. Winton, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Evaluation of the boron content in fuel plates fabricated for the first core loading of the Army SM-1 Reactor, formerly APPR-1 (Oak Ridge National Laboratory, 1962), by Julian H. Cherubini, R. J. Beaver, C. F. Leitten, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• Sulfex-thorex and darex-thorex processes for the dissolution of consolidated edison power reactor fuel : laboratory development (Oak Ridge National Laboratory, 1960), by L. M. Ferris, A. H. Kibbey, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Chemical Technology Division. Chemical Development Section B. (page images at HathiTrust)
• Effect of environment on the creep properties of type 304 stainless steel at elevated temperatures (Oak Ridge National Laboratory, 1962), by H. E. McCoy, D. A. Douglas, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• American Stainless Steel Company, plaintiff, vs. Ludlum Steel Company, defendant. Brief for defendant at final hearing. (The Evening Post Job Printing Office, Inc., 1921), by American Stainless Steel Company and Ludlum Steel Company (page images at HathiTrust)
• Stainless steel handbook. (Pittsburgh, 1956), by Allegheny Ludlum Steel Corporation (page images at HathiTrust)
• Design and testing of a teflon lined plug valve : period of work: April 29, 1948 - August 9, 1948 (U.S. Atomic Energy Commission. Technical Information Division, 1950), by C. D. Watson, G. A. West, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fuel rod experience during the Spert I destructive test series with a stainless steel clad, rod-type core (Idaho Operations Office, U.S. Atomic Energy Commission, 1965), by J. Dugone, D. D. Wieland, Phillips Petroleum Company. Atomic Energy Division, U.S. Atomic Energy Commission. Idaho Operations Office, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Effects of gas corrosion and aging on ML-1 turbine alloys (U.S. Dept. of Commerce, Office of Technical Services, 1962), by B. E. Farwell, J. S. Brunhouse, and Aerojet-General Corporation. Aerojet-General Nucleonics (page images at HathiTrust)
• Effect of dissolved stainless steel components on vapor-liquid equilibria in aqua-regia (Idaho Operations Office, U.S. Atomic Energy Commission, 1959), by Bernice E. Paige, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)
• Removal of alloy metals from waste solutions by mercury cathode electrolysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1960), by Milton E. McLain, D. W. Rhodes, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Co-removal of fission products in the electrolytic separation of iron, chromium, and nickel at a dropping mercury electrode (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by Kenneth T. Faler, D. Richard Anderson, Phillips Petroleum Company. Atomic Energy Division, Idaho National Reactor Testing Station, and Idaho Chemical Processing Plant. Chemical Development Branch (page images at HathiTrust)
• Laboratory studies of the rate of removal of stainless steel ions by mercury cathode electrolysis (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), by D. Richard Anderson, D. W. Rhodes, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Thermal decomposition of hydrated iron, chromium, and nickel nitrates and their mixtures (U.S. Atomic Energy Commission, Idaho Operations Office, 1962), by E. M. Vander Wall, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Experimental results of potentially destructive reactivity additions to an oxide core (U.S. Atomic Energy Commission, Idaho Operations Office, 1964), by J. E. Barry, J. E. Grund, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Experimental and analytical reactivity studies of clean critical stainless steel cores (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by A. H. Spano, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Damage to stainless steel fuel in Special Power Excursion Reactor Test reactors (U.S. Atomic Energy Commission, Idaho Operations Office, 1961), by R. E. Heffner, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• Thermal expansion of alloys of the "stainless iron" type (U.S. Dept. of Commerce, Bureau of Standards :, 1928), by Peter Hidnert, W. T. Sweeney, and United States. National Bureau of Standards (page images at HathiTrust)
• Thermal expansion of nickel, monel metal, stellite, stainless steel, and aluminum ([U.S. Dept. of Commerce, Bureau of Standards] :, 1921), by Wilmer Henry Souder, Peter Hidnert, and United States. National Bureau of Standards (page images at HathiTrust)
• Fabrication of U. S. S. stainless and heat resisting steels. (The Corporation, 1957), by United States Steel Corporation (page images at HathiTrust)
• Stainless steel sheet and strip from Spain : determination of the Commission in investigation no. 731-TA-164 (final) under the Tariff Act of 1930, together with the information obtained in the investigation (U.S. International Trade Commission, 1984), by United States International Trade Commission and Bruce Cates (page images at HathiTrust)
• Welded stainless steel pipes and tubes from Sweden : views on remand in investigation no. 731-TA-354 (Final). (U.S. International Trade Commission, 1990), by United States International Trade Commission (page images at HathiTrust; US access only)
• Homogeneity characterization of NBS spectrometric standards III: white cast iron and stainless steel powder compact (For sale by the Superintendent of Documents, U.S. Govt. Print. Off., 1966), by Harvey Yakowitz, R. E. Michaelis, and D. L. Vieth (page images at HathiTrust)
• Stainless steel sheet and strip from Spain : determination of the Commission in investigation no. 731-TA-164 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1984), by United States International Trade Commission (page images at HathiTrust)
• Welded stainless steel pipe and tube from Japan : determination of no injury in investigation no. AA1921-180 under the Antidumping Act, 1921, as amended, together with the information obtained in the investigation. (U.S. International Trade Commission, 1978), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-203-5 under section 203 of the Trade act of 1974 (U.S. International Trade Commission, 1979), by Daniel Francis Leahy, Nicholas Tolerico, and United States International Trade Commission (page images at HathiTrust)
• Stainless steel wire cloth from Japan : determination of the Commission in investigation no. 731-TA-190 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1984), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, first calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (U.S. International Trade Commission, 1979), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, fourth calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (U.S. International Trade Commission, 1980), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Stainless steel and alloy tool steel : U.S. production, shipments, employment, man-hours, and prices, second calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Tariff Act of 1930. (U.S. International Trade Commission, 1979), by United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Japan : determination of the commission in investigation no. 731-TA-376 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1988), by United States International Trade Commission (page images at HathiTrust)
• Certain seamless steel pipes and tubes from Japan : determination of the Commission in investigation no. 731-TA-87 (final) under the Tariff act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1983), by United States International Trade Commission, Clark Workman, James J. Lukes, and Abigail Eltzroth (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-201-48 under section 201 of the Trade act of 1974. (U.S. International Trade Commission, 1983), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel plate from Sweden : determination of inquiry in investigation no. AA1921-114 under the Antidumping Act, 1921, as amended. (U.S. Tariff Commission, 1973), by United States Tariff Commission (page images at HathiTrust; US access only)
• Stainless steel and alloy tool steel, U.S. production, shipments, employment, man-hours, and prices third calendar quarter 1979 : report to the president on investigation no. 332-94 under section 332 of the Trade Act of 1930. (U.S. International Trade Commission, 1979), by United States International Trade Commission. Office of Industries and United States International Trade Commission. Minerals and Metals Division (page images at HathiTrust)
• Stainless steel and alloy tool steel : report to the President on investigation no. TA-203-3 under section 203(i)(2) of the Trade act of 1974 (U.S. International Trade Commission, 1977), by Nicholas C. Tolerico and United States International Trade Commission (page images at HathiTrust; US access only)
• Top-of-the-stove stainless steel cooking ware from Korea and Taiwan : determinations of the Commission in investigations nos. 701-TA-267-268 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations : determinations of the Commission in investigations nos. 731-TA-304-305 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1986), by United States International Trade Commission (page images at HathiTrust)
• Top-of-the-stove stainless steel cooking ware from Korea and Taiwan determinations of the commission in investigations nos. 701-TA-267-268 (final) under the Tariff Act of 1930, together with the information obtained in the investigations, determinations of the commission in investigations nos. 731-TA-304-305 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)
• Welded carbon steel pipes and tubes from Brazil, France, Italy, the Republic of Korea, and West Germany : determinations of the Commission in investigations nos. 701-TA-165 through 169 (preliminary) under the Tariff act of 1930, together with the information obtained in the investigations. (U.S. International Trade Commission, 1982), by United States International Trade Commission, Gerald R. Benedick, Richard Weible, and Abigail Eltzroth (page images at HathiTrust)
• Stainless steel sheet and strip and stainless steel plate from the United Kingdom : determinations of the Commission in investigations nos. 701-TA-195 and 196 (preliminary) under section 703(a) of the Tariff act of 1930, together with the information obtained in the investigations. (Washington, D.C. : U.S. International Trade Commission, 1982), by United States International Trade Commission, Wilhelm Zeitler, Daniel Klett, and Patrick Magrath (page images at HathiTrust)
• Stainless steel pipes and tubes from Sweden : determination of the Commission in investigation no. 701-TA-281 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1986), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel pipes and tubes from Sweden : determination of the Commission in investigation no. 701-TA-281 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)
• Stainless steel and alloy tool steel report to the President on investigation no. TA-203-16 under section 203 of the Trade Act of 1974. (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)
• Certain stainless steel butt-weld pipe fittings from Japan : determination of the Commission in investigation no. 731-TA-376 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. (U.S. International Trade Commission, 1987), by United States International Trade Commission (page images at HathiTrust)
• A study of sensitization in types 301 and 304L stainless steels using mossbauer spectroscopy (National Aeronautics and Space Administration, 1968), by O. W. Albritton (page images at HathiTrust; US access only)
• Stabilization of carbon and nitrogen in stainless steel and its effect on mass transfer in a stainless steel - Cb-1Zr - potassium system / R. W. Harrison. (National Aeronautics and Space Administration, 1967), by R. W. Harrison (page images at HathiTrust; US access only)
• Evaluation of tantalum/316 stainless steel bimetallic tubing (National Aeronautics and Space Administration ;, 1970), by J. N. Kass, D. R. Stoner, Lewis Research Center, and Westinghouse Electric Corporation. Astronuclear Laboratory (page images at HathiTrust)
• NASA TN D-2300 (National Aeronautics and Space Administration ; [For sale by the Office of Technical Services, Department of Commerce, Washington D.C. 20230], 1964), by Wayne S. Slemp, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Friction behavior of 304 stainless steel of varying hardness lubricated with benzene and some benzyl structures (National Aeronautics and Space Administration ;, 1974), by Donald H. Buckley and Lewis Research Center (page images at HathiTrust)
• NASA TN D-5777 (National Aeronautics and Space Administration :, 1970), by R. A. Outlaw, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-5917 (National Aeronautics and Space Administration :, 1970), by Kenneth H. Holko, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• NASA TN D-6564 (National Aeronautics and Space Administration ; [For sale for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1971), by John H. Lynch, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Lead, indium, and tin as potential lubricants in liquid hydrogen (National Aeronautics and Space Administration ;, 1971), by Donald W. Wisander and Lewis Research Center (page images at HathiTrust)
• NASA TN D-6309 (National Aeronautics and Space Administration ;, 1971), by Gary R. Halford, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• The tensile strength of brazed stainless steel joints (U.S. Atomic Energy Commission, Technical Information Service, 1955), by H. A. Saller, H. L. Klebanow, J. T. Stacy, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion of xenon through aluminum and stainless steel (Brookhaven National Laboratory, 1960), by A. W. Castleman, A. M. Eshaya, F. E. Hoffmann, U.S. Atomic Energy Commission, Brookhaven National Laboratory, and Inc Associated Universities (page images at HathiTrust)
• Chemical decladding of stainless steel fuel elements in a stainless steel dissolver : progress report no. 1 (Brookhaven National Laboratory, 1962), by Herbert M. Katz, U.S. Atomic Energy Commission, and Brookhaven National Laboratory (page images at HathiTrust)
• Fluidized bed reprocessing of stainless steel clad UO₂ power reactor fuels (Brookhaven National Laboratory, 1965), by C. B. Bartlett, Brookhaven National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Reactor Chemistry Division. (Oak Ridge National Laboratory, 1968), by W. D. Yuille, R. E. Adams, Oak Ridge National Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stainless steel university reactor (Oak Ridge National Laboratory, 1954), by W. E. Kinney, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Vapor deposition of molybdenum and niobium coatings on stainless steel tubes (Battelle Memorial Institute, 1957), by Ivor E. Campbell, Robert B. Palmer, Danny M. Rosenbaum, Carroll F. Powell, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Joining zircaloy-stainless steel and SAP alloys by friction, rolling and explosive techniques (Battelle Memorial Institute ;, 1962), by Ronald J. Carlson, Stanley W. Porembka, Stan J. Paprocki, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Electroplating of tapered silver deposits on stainless steel and inconel tubes for a high-capacity mercury-column rheostat (Los Alamos Scientific Laboratory of the University of California, 1958), by L. J. Quintana, R. Seegmiller, J. K. Gore, J. M. Taub, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Protective coatings for high-temperature metal alloys (Battelle Memorial Institute, 1952), by Cameron G. Harman, Loran S. O'Bannon, E. F. Fowler, Battelle Memorial Institute, and U.S. Atomic Energy Commission (page images at HathiTrust; US access only)
• Electron metallography of an irradiated stainless steel nozzle (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1961), by Carl L. Angerman, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Relaxation of torsional stresses in stainless steel during irradiation (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1962), by Richard E. Schreiber, U.S. Atomic Energy Commission, and Savannah River Laboratory (page images at HathiTrust)
• Evaluation of tandem-extruded joints between zircaloy and stainless steel (E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, 1962), by J. Walter Joseph, F. C. Apple, U.S. Atomic Energy Commission, and Savannah River Laboratory (page images at HathiTrust)
• Fabrication studies of clad copper matrix boride dispersion control materials (United States Atomic Energy Commission, Office of Technical Information, 1960), by K. C. Antony, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Examination of 304 stainless steel cladding from cold-swaged and rolled fuel rods (U.S. Atomic Energy Commission, Division of Technical Information, 1962), by W. V. Cummings, R. E. Blood, D. R. Lewis, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Erosion flow testing of purposely defected stainless steel clad compacted UO₂ powder fuel (U.S. Atomic Energy Commission, Division of Technical Information, 1962), by J. W. Lingafelter, R. J. Seely, E. A. Lees, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Evaluation of 300 series stainless steel tubing for fuel cladding (U.S. Atomic Energy Commission, Division of Technical Information, 1962), by R. F. Kirby, General Electric Company. Atomic Power Equipment Department, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Evaluation of aluminum-coated wires as reinforcement for articulated concrete mattresses : report 1 : basic program (Waterways Experiment Station, 1962), by United States. Army. Corps of Engineers. Lower Mississippi Valley Division. Materials and Concrete Laboratory and United States. Mississippi River Commission (page images at HathiTrust)
• The stability and properties of alloy steels at elevated temperatures : a literature survey (U.S. Atomic Energy Commission, Division of Technical Information, 1960), by M. T. Simnad, U.S. Atomic Energy Commission, and General Dynamics Corporation (page images at HathiTrust)
• Resistance to attack by sodium (Knolls Atomic Power Laboratory, 1954), by E. G. Brush, R. F. Koenig, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion studies : I. the permeability of type 347 stainless steel to hydrogen and tritium (Knolls Atomic Power Laboratory, 1953), by D. Randall, O. N. Salmon, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Electrical contact resistance between sodium and stainless steel (Knolls Atomic Power Laboratory, General Electric Company, 1956), by L. B. Vandenberg, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Structural analysis of a reflux pool-boiler solar receiver (Sandia National Laboratories, 1991), by Edward L. Hoffman, Charles M. Stone, Sandia National Laboratories, and Sandia Laboratories (page images at HathiTrust)
• Evaluation of ferritic substitutes for the austenitic stainless steels : resistance to attack by sodium (Knolls Atomic Power Laboratory, 1954), by E. G. Brush, R. F. Koenig, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Rate of alloying of uranium alloys with stainless steel. Part I, 1800 to 2300°F (Atomics International, 1960), by R. S. Neymark, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Preliminary report on the metal powder slip casting process. Part 1 (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1957., 1957), by Henry H. Hausner, Frank W. Heck, Edmund B. Wilson, Donald P. Ferriss, U.S. Atomic Energy Commission. New York Operations Office, and Penn-Texas Corporation (page images at HathiTrust)
• Cyclotron irradiation damage of thorium, stainless steel, and zirconium (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by F. E. Bowman, C. J. Meechan, F.L. Fillmore, R.R. Eggleston, A. Andrew, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• Determination of uranium dioxide in stainless steels by the x-ray fluorescence method (Atomics International, 1957), by Louis Silverman, Lavada A. Moudy, William W. Houk, U.S. Atomic Energy Commission. Technical Information Center, and North American Aviation. Atomics International Division (page images at HathiTrust)
• An investigation of the slip-casting mechanism as applied to stainless steel powder (Washington, D.C. : Office of Technical Services, Department of Commerce, 1956., 1956), by W. G. Lidman, R. V. Rubino, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stainless steel : construction and engineering memorandum, no. 24 (Oak Ridge, Tennessee : U.S. Atomic Energy Commission, Division of Construction and Supply, 1956., 1956), by Gardiner Luce and U.S. Atomic Energy Commission (page images at HathiTrust)
• West coast markets for stainless steel industrial development. ([Olympia?, 1962), by Washington (State). Dept. of Commerce and Economic Development. Business and Economic Research Division (page images at HathiTrust; US access only)
• Rolling 18-8 stainless steel powder in strip (Oak Ridge, Tennessee : United States Atomic Energy Commission, Technical Information Service, 1954., 1954), by S. Storchheim, B. Sprissler, J. Nylin, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Solubility of hydrogen isotopes in nickel and type 347 stainless steel (Schenectady, New York : Knolls Atomic Power Laboratory, 1953., 1953), by Norval J. Hawkins, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Heat transfer measurements at sodium - stainless steel interface (Schenectady, New York : Knolls Atomic Power Laboratory, 1951., 1951), by James W. Moyer, W. A. Riemen, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Facts and figures about the stainless steel skyscraper; the Socony Mobil building. ([New York, 1955), by American Iron and Steel Institute. Committee of Stainless Steel Producers and Socony Mobil Oil Company (page images at HathiTrust; US access only)
• The stress-rupture strength of type 347 stainless steel under cyclic temperature (Knolls Atomic Power Laboratory, 1954), by E. E. Baldwin, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Diffusion studies. [Part] I, The permeability of type 347 stainless steel to hydrogen and tritium (Knolls Atomic Power Laboratory, 1953), by D. Randall, O. N. Salmon, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The self-regulation by moderator boiling in stainless steel-UO₂-H₂O reactors (White Plains, New York : Nuclear Development Corporation of America, 1955., 1955), by Louise Gartner, Robert Daane, U.S. Atomic Energy Commission, and Nuclear Development Corporation of America (page images at HathiTrust)
• Firth-Sterling S-less stainless steel... ([s.n., 1923), by McKeesport Firth-Sterling Steel Company (page images at HathiTrust)
• The architectural and domestic uses of stainless steel. (The Company, 1937), by Union Carbide Corporation. Electro Metallurgical Company (page images at HathiTrust; US access only)
• Fatigue data on precipitation-hardenable stainless steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by R. J. Favor, W. P. Achbach, H. J. Grover, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• The physical metallurgy of precipitation-hardenable stainless steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by D. C. Ludwigson, A. M. Hall, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Physical and mechanical properties of nine commercial precipitation-hardenable stainless steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1959., 1959), by D. A. Roberts, A. M. Hall, D. B. Roach, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• High-strength-steel forgings (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by H.-J. Henning, F. W. Boulger, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Design information on PH 15-7 Mo stainless steel for aircraft and missiles (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1960., 1960), by R. J. Favor, W. P. Achbach, O. L. Deel, Defense Metals Information Center (U.S.), and United States. Office of the Director of Defense Research and Engineering (page images at HathiTrust)
• A review of bending methods for stainless steel tubing (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by C. T. Olofson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Semiaustenitic precipitation-hardenable stainless steels (Columbus, Ohio : Defense Metals Information Center, Battelle Memorial Institute, 1961., 1961), by D. C. Ludwigson and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Stainless steel and titanium sandwich structures (Columbus, Ohio : Titanium Metallurgical Laboratory, Battelle Memorial Institute, 1957., 1957), by W. J. Lewis, P. J. Rieppel, G. E. Faulkner, and Defense Metals Information Center (U.S.) (page images at HathiTrust)
• The current status and 1970 potential of selected defense metals (Columbus, Ohio : Battelle Memorial Institute, Defense Metals Information Center, 1963., 1963), by Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Ludlum Steel Company, plaintiff, vs. Daniel F. Terry, defendant. (Evening Post Job Printing Office, 1928), by Ludlum Steel Company and Daniel F. Terry (page images at HathiTrust)
• Heat transfer, flow instability and critical heat flux for water in a small tube at 200 psia (Argonne National Laboratory, Reactor Engineering Division, 1963), by R. J. Weatherhead and Argonne National Laboratory (page images at HathiTrust)
• Experimental program on water-moderated arrays of uranium and stainless steel (United States Atomic Energy Commission, Division of Technical Information ;, 1962), by L. Welshans, Martin Company. Nuclear Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Analysis of failure of type 304 stainless steel clad swaged powder fuel assembly (U.S. Atomic Energy Commission, Division of Technical Information, 1963), by E. A. Lees, Vallecitos Atomic Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Recoil activity from stainless-steel cladding : a major contribution to coolant-stream radioactivity in GCR-2 (Massachusetts Institute of Technology, Engineering Practice School, 1959), by W. L. Brassert, F. H. Morse, G. K. Gardiner, U.S. Atomic Energy Commission, and Massachusetts Institute of Technology. Engineering Practice School (page images at HathiTrust)
• Integral data evaluation of stainless steel, ²³⁹Pu, ²⁴⁰Pu, and H₂O for homogeneous plutonium systems (Washington, D. C. : Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Safeguards, Fuel Cycle, and Environmental Research, 1979., 1979), by Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards, D. A. Kottwitz, T. J. Trapp, J. K. Thompson, U. P. Jenquin, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, and Pacific Northwest Laboratory (page images at HathiTrust)
• Long-term embrittlement of cast duplex stainless steels in LWR systems (Washington, D.C. : Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, [1984], 1984), by O. K. Chopra, G. Ayrault, Argonne National Laboratory. Materials Science and Technology Division, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology (page images at HathiTrust)
• Supplementary special materials bulletin no. 5-A : Metal-surfaced plywood (Schenectady, New York : Knolls Atomic Power Laboratory, 1950., 1950), by B. H. Webb, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Void formation in proton-irradiated stainless steel (Canoga Park, California : Atomics International, North American Rockwell, 1970., 1970), by D. W. Keefer, D. Kramer, A. G. Pard, J. C. Robinson, H. H. Neely, Rockwell International. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Reduction of the outgassing of thick stainless-steel sheets in ultrahigh vacuum by high-temperature vacuum treatment (Princeton, N.J. : Princeton University Plasma Physics Laboratory, 1968., 1968), by Gerhard Lewin, U.S. Atomic Energy Commission, and Princeton University. Plasma Physics Laboratory (page images at HathiTrust)
• Mechanical behavior of type 304 stainless steel in copper-contaminated sodium in the range 950 to 1300[degrees]F ([Canoga Park, California]. : Atomics International, A Division of North American Rockwell Corporation, 1969., 1969), by D. F. Atkins, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• Deposition of manganese in a sodium-stainless steel system (Canoga Park, California. : Atomics International, North American Rockwell, 1971., 1971), by J. Guon, U.S. Atomic Energy Commission, and Rockwell International. Atomics International Division (page images at HathiTrust)
• Corrosive environment tester for filter media (Oak Ridge, Tennessee : Oak Ridge Gaseous Diffusion Plant, Union Carbide Corporation, 1977., 1977), by G. S. Petit, R. D. Rivers, C. A. Keinberger, C. W. Weber, Oak Ridge Gaseous Diffusion Plant, Union Carbide Corporation, and United States. Energy Research and Development Administration (page images at HathiTrust)
• Effect of prior creep on short-time mechanical properties of 17-7PH stainless steel : (RH 950 condition compared to TH 1050 condition) (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, United States Air Force, 1959., 1959), by Jeremy V. Gluck, J. W. Freeman, Wright Air Development Center, United States. Air Force. Air Research and Development Command, and University of Michigan. Research Institute (page images at HathiTrust)
• Stainless steels : an elementary discussion. (Pittsburgh, Pa. : Allegheny Ludlum Steel Corporation, [between 1940 and 1949?], 1940), by Allegheny Ludlum Steel Corporation (page images at HathiTrust; US access only)
• Standard types of stainless steels, June, 1955 (New York, N.Y. : American Iron and Steel Institute, Committee of Stainless Steel Producers, 1955., 1955), by American Iron and Steel Institute. Committee of Stainless Steel Producers (page images at HathiTrust; US access only)

More items available under broader and related terms at left.