The Online Books Page

Strains and stresses

See also what's at your library, or elsewhere.

• Architecture
• Elastic solids
• Flexure
• Mechanics
• Statics
• Structural analysis (Engineering)

• Deformations (Mechanics)
• Elasticity
• Engineering design
• Graphic statics
• Strength of materials
• Stress waves
• Structural design

• Axial loads
• Bending moment
• Bending stresses
• Buckling (Mechanics)
• Disks, Rotating
• Eccentric loads
• Girders, Continuous
• Influence lines
• Lateral loads
• Loads (Mechanics)
• Notch effect
• Residual stresses
• Safety factor in engineering
• Shear (Mechanics)
• Shock (Mechanics)
• Sound pressure
• Strain hardening
• Stress concentration
• Stress corrosion
• Stress relaxation (Physics)
• Stress relaxation tests
• Stress-strain curves
• Structural dynamics
• Thermal stresses
• Torsion

• Engineering, Architectural
• Architectural engineering
• Stresses and strains

• A Translation of The Stability of Elastic Equilibrium (uncredited translator; technical report AFFDL-TR-70-25; 1970), by W. T. Koiter (PDF at dtic.mil)
• Mechanical Behavior of Engineering Materials (Englewood Cliffs, NJ: Prentice-Hall, 1962), by Joseph Marin (page images at HathiTrust)
• A.C.S.R. Graphic Method for Sag-Tension Calculations (Pittsburgh: Aluminum Company of America, 1927), by Theodore Varney (page images at HathiTrust)
• Stresses in Aircraft and Shell Structures (New York et al.: McGraw-Hill, 1956), by Paul Kuhn (page images at HathiTrust)
• A Theory for the Effect of Mean Stress on Fatigue of Metals Under Combined Torsion and Axial Load or Bending (1958), by William N. Findley (page images at HathiTrust)
• Torsion Analysis of Rolled Steel Sections (New York: Bethlehem Steel Corp., 1963), by Conrad P. Heins and P. A. Seaburg (page images at HathiTrust)
• Wall panels : analysis and design criteria / (Washington : U.S. Office of Policy Development and Research, Dept. of Housing and Urban Development, 1976), by K. M. Kripanarayanan, Mark Fintel, and United States. Dept. of Housing and Urban Development. Office of Policy Development and Research (page images at HathiTrust; US access only)
• Philosophy of structural response to normal and abnormal loads. (Washington : U.S. Office of Policy Development and Research, Dept. of Housing and Urban Development, 1976), by United States. Dept. of Housing and Urban Development. Office of Policy Development and Research (page images at HathiTrust; US access only)
• Compressive properties; perforated cover plates for steel columns. Progress report no. 1- ([New York, N.Y.] Committee on Technical Research, American Institute of Steel Construction, 1941-), by United States. Bureau of Standards (page images at HathiTrust; US access only)
• Drang und Zwang; eine höhere Festigkeitslehre für Ingenieure, (München; Berlin, R. Oldenbourg, 1920-), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust; US access only)
• Analysis of stresses, proportioning the material, details of construction, details, bills, and estimates, streets and highways, paving. (Scranton : International Textbook Co., ©1903) (page images at HathiTrust)
• Airplane design; a textbook and handbook on airplane and helicopter layout and preliminary design calculations, (Boulder, Colo., The author;, c1954), by Karl Dawson Wood (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies; being lectures on mathematical physics. (New York, Hafner, 1949), by Arthur Gordon Webster (page images at HathiTrust)
• Das Gesetz des Kraftverlaufes beim Stoss; Untersuchungen über die gesetzmässigen Beziehungen beim Stoss elastischer Körper, (Braunschweig, F. Vieweg und Sohn Akt.-Ges., 1924), by Franz Berger (page images at HathiTrust; US access only)
• Wood structural design data. ([Washington], 1941-), by National Lumber Manufacturers Association (page images at HathiTrust)
• Introduzione nel calcolo dei sistemi iperstatici: il portale. (Milano, Hoepli, 1925), by Eugenio Kálmán (page images at HathiTrust; US access only)
• Report of the Committee on the mechanical testing of timber ... (London, H. M. Stationery off. [printed by Harrison and sons, ltd.], 1934), by Great Britain. Dept. of scientific and industrial research. Committee on mechanical testing of timber and J. A. Ewing (page images at HathiTrust)
• Douglas fir use book. (Seattle, Wash. : West Coast Lumbermen's Association, 1930-), by West Coast Lumbermen's Association (page images at HathiTrust; US access only)
• Rayleigh's principle and its applications to engineering; the theory and practice of the energy method for the approximate determination of critical loads and speeds, ([New York] Dover Publications, [1956]), by G. Temple and William Gee Bickley (page images at HathiTrust)
• Introduction to the theoretical and experimental analysis of stress and strain, (New York, McGraw-Hill, 1958), by Augusto J. Durelli (page images at HathiTrust)
• Modern timber engineering. (New Orleans, Southern Pine Assn., [1949]), by Walter Fleming Scofield, Howard James. Course in modern timber engineering Hansen, William Howard O'Brien, and Southern Pine Association (page images at HathiTrust)
• Modern timber engineering, (New Orleans, Southern Pine Association, [c1954]), by Walter Fleming Scofield, Thomas E. Brussell, and William Howard O'Brien (page images at HathiTrust)
• Collapse load of a spherical cap / (Chicago, Ill. : Armour Research Foundation, Illinois Institute of Technology, 1959), by Philip Gibson Hodge, U.S. Atomic Energy Commission, and Armour Research Foundation (U.S.) (page images at HathiTrust; US access only)
• Paper for first symposium on naval structural mechanics plasticity. (Providence, Division of Applied Mathematics, Brown University, 1958), by Daniel C. Drucker (page images at HathiTrust)
• Théorie de l'équilibre des systèms élastiques et ses applications, (Turin, A. F. Negro, 1879), by Alberto Catigliano (page images at HathiTrust)
• A semi-graphical method for analyzing strains measured on three or four gage lines intersecting at 45 degrees / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by H. N. Hill and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of the stresses in a discontinuity region of a pressure vessel / (Oak Ridge, Tenn., Oak Ridge National Laboratory, 1958), by William LaVon Greenstreet and U.S. Atomic Energy Commission (page images at HathiTrust)
• Notes on the strength of materials and the stability of structures. : Printed for the civil engineering classes in Union College. (Schenectady, N.Y. : Wiseman, Russell, printers & stereotypers, 1870), by W. M. Gillespie (page images at HathiTrust)
• Strength of beams under transverse loads / By Prof. W. Allan ... (New York : D. Van Nostrand, 1875), by William Allan (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations / By Herman Haupt ... (New York : D. Appleton and company, 1856), by Herman Haupt (page images at HathiTrust)
• Ob odnoĭ zadachi͡e stroitelʹnoĭ mekhaniki. (S.-Peterburg, Tip. I͡U.N. Ėrlik, 1904), by A. van der Vliet (page images at HathiTrust; US access only)
• Graficheskīĭ razschet t͡silindricheskikh svodov na osnovanīi teoriīi uprugosti. (S.-Peterburg, Tip. i lit. V.A. Tikhanova, 1898), by N. Zhitkevich (page images at HathiTrust; US access only)
• Moments and shears in a force fitted rectangular plate, general model. Douglas report SM-42391. Prepared by G. Stoffmacher, Space Strength Section. Prepared under the sponsorship of the Douglas Aircraft Company, Independent Research and Development Program, Account no. 81295-354. ([Santa Monica, Calif.] Space Systems Engineering, Missile & Space Systems Division, Douglas Aircraft Co., Inc., 1962), by Inc. Missile and Space Systems Division Douglas Aircraft Company (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley & Sons, 1897), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• A treatise on roofs and bridges [electronic resource] : with numerous exercises / (New York : D. Van Nostrand, 1898), by Edward A. Bowser (page images at HathiTrust)
• The design of flexible surfaces / ([Ann Arbor, Mich., 1937]), by William Stuart Housel (page images at HathiTrust)
• A manual for the design of piping for flexibility by the use of graphs ([Detroit] The Detroit Edison company, c1934), by Edwin A. Wert, Edge Taylor Cope, and Samuel Smith (page images at HathiTrust)
• The stresses in framed structures. Including the strength of materials and theory of flexure. (New York, J. Wiley & Sons; [etc., etc.], 1896), by A. Jay Du Bois (page images at HathiTrust)
• An analysis of the stresses in the Washington Avenue concrete arch bridge over the Grand River at the city of Lansing, Michigan / (1913), by Joseph A. Macdonald and Earle Horton Meyer (page images at HathiTrust; US access only)
• The Roorkee manual of applied mechanics; direct and transverse strain, principally by analytical methods. (Roorkee, Thomason Civil Eng. Coll. Press, 1896-1900), by Allan Cunningham and J. H. C. Harrison (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, (New York, J. Wiley & Sons, 1883), by William H. Burr (page images at HathiTrust)
• Maximum stresses in framed bridges / (New York : D. Van Nostrand, 1878), by Wm. Cain (page images at HathiTrust)
• Theory of steel-concrete arches and of vaulted structures (New York, Van Nostrand, 1909), by Wm. Cain (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings. Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... (New York, J. Wiley & sons, 1882 [c1877]), by R. G. Hatfield (page images at HathiTrust)
• Principles of economy in the design of metallic bridges; (New York, J. Wiley & sons, 1885), by Charles B. Bender (page images at HathiTrust)
• Theory and practice in designing, (New York, D. Van Nostrand company, 1911), by Henry Adams (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice. (New York, J. Wiley & sons; [etc., etc.], 1911-16), by J. B. Johnson, W. S. Kinne, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• A treatise on the strength of bridges and roofs, with practical applications and examples for the use of engineers and students, (New York, D. Van Nostrand, 1873), by Samuel Henry Shreve (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs. (New York, J. Wiley & Sons, 1876), by De Volson Wood (page images at HathiTrust)
• Apparatus for measuring strain and applying stress [with an account of some experiments on the behaviour of iron and steel under stress] (Montreal, 1902), by E. G. Coker (page images at HathiTrust)
• Die Berechnung statisch unbestimmter Tragwerke nach der Methode des Viermomentensatzes. (Berlin : J. Springer, 1918), by Friedrich Bleich (page images at HathiTrust; US access only)
• On the stresses developed in beams loaded transversely. ([Montreal, 1902]), by Henry T. Bovey (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley, 1895, c1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley, 1894), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• A new extensometer. ([Montreal, 1902]), by Henry T. Bovey (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department Civil Engineering at the Rensselaer Polytechnic Institute. (New York, J. Wiley, 1891), by William H. Burr (page images at HathiTrust)
• A text-book of the strength of materials and of stresses in structures : for use in scientific high schools and schools of technology / (New Haven, Conn. ; Boardman School Press, 1897), by Thomas William Mather (page images at HathiTrust)
• Structural frameworks; a new method of analysis, with tables, (Chapel Hill, The University of North Carolina Press, 1934), by Thomas Felix Hickerson (page images at HathiTrust)
• A treatise on bracing with its application to bridges / (Edinburgh : A. & C. Black [etc., etc.], 1851), by Robert H. Bow (page images at HathiTrust)
• The dynamics of particles and of rigid elastic, and fluid bodies; being lectures on mathematical physics.. (New York, G.E. Stechert, [1942]), by Arthur Gordon Webster (page images at HathiTrust)
• Airplane stress analysis; an introductory treatise, (New York, Ronald Press, [c1929]), by Alexander Klemin and George F. Titterton (page images at HathiTrust)
• Applications of stress analysis (Ann Arbor, University of Michigan, 1959), by Charles Lipson and D. H. Thiel (page images at HathiTrust)
• Theory of limit design. (New York, J. Wiley, [1948]), by J. A. Van den Broek (page images at HathiTrust)
• Method of converting heavy motor vehicle loads into equivalent design loads on the basis of maximum floor beam reactions, (College Station, Texas A. & M. College System, Texas Engineering Experiment Station, 1954), by Henson K. Stephenson and Kriss Clonninger (page images at HathiTrust)
• A tentative guide for fatigue testing and the statistical anaylsis of fatigue data. (Philadelphia, American Society for Testing Materials, 1958), by American Society for Testing Materials. Committee E-9 on Fatigue (page images at HathiTrust)
• Investigation of the buckling of columns by the photoelastic method of stress analysis, (University Park, N.M., 1961), by Samuel H Smith and Don A. Linger (page images at HathiTrust)
• Elements of structural engineering. (New york : Ronald P., 1954), by Ernest C. Harris (page images at HathiTrust)
• Traverse method for analyzing continuous structures / (Los Angeles : Stewart, 1948), by Ralph William Stewart (page images at HathiTrust)
• Research summary; a summary of studies conducted prior to July 1952 and related to the field of ship structures. ([Washington], 1953), by United States. Ship Structure Committee (page images at HathiTrust)
• An introduction to experimental stress analysis. (New York : Wiley, 1950), by George Hamor Lee (page images at HathiTrust)
• Application of double Fourier series to the calculation of stresses caused by pure bending in a circular monocoque cylinder with a cut-out, ([New York] The Polish Institute of Arts and Sciences in America, 1946), by Zbigniew Krzywoblocki and Polish Institute of Arts and Sciences in America (page images at HathiTrust)
• Translation key to Kleinlogel's Mehrstielige Rahmen (multi-column frames) volumes 1 and 2. (New York, F. Ungar, [1948]), by Fred Blum and Adolf Kleinlogel (page images at HathiTrust; US access only)
• Structural bending moments simplified; rapid solutions for continuous beams, frames and arched frames, quadrangular structures, ([New York, Printed by Polygraphic company of America, c1938]), by Ulrik Tornoe Berg (page images at HathiTrust)
• Fatigue of metals; (New York, N.Y., The Nitralloy corporation, [1942]), by David Landau and New York Nitralloy corporation (page images at HathiTrust)
• Wind-tunnel investigation of the aerodynamic and structural-deflection characteristics of an inflatable airplane / (Washington, D.C. : GPO, 1962), by H. Clyde McLemore, United States National Aeronautics and Space Administration, and George C. Marshall Space Flight Center (page images at HathiTrust)
• Fundamentals of stress analysis, (Glendale, Calif., Aero publishers, [c1942-), by Albert Deyarmond and Albert Arslan (page images at HathiTrust)
• An electrically-controlled single-lever testing-machine and some torsion tests / (Westminster, S. W. : Institution of Mechanical Engineers, 1907), by Charles E. Larard and Institution of Mechanical Engineers (Grest Britain) (page images at HathiTrust; US access only)
• Stresses in tall buildings : an investigation of the stresses in tall steel buildings of the cage construction type with portal bracing. (Columbus, Ohio : The University, 1912), by Cyrus Alan Melick (page images at HathiTrust)
• In situ stresses in rock, Rainier Mesa, Nevada test site /, by Leonard Obert, Lawrence Radiation Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Strength and elasticity of structural members / (London : E. Arnold, 1908), by Richard John Woods (page images at HathiTrust; US access only)
• Evolution of allowable stresses in shear for lumber / ([Madison, Wis.] : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1979), by Robert L. Ethington and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• An investigation of the load-deformation characteristics of reinforced concrete beams up to the point of failure, (Urbana, 1952), by James Raymond Gasten (page images at HathiTrust; US access only)
• Investigations of pressures and deflections for flexible pavements. (Vicksburg, Miss. : Waterways Experiment Station, 1951), by Waterways Experiment Station (U.S.) and United States Army Corps of Engineers (page images at HathiTrust)
• Investigation of ship mooring forces; final report (Sierra Madre, Calif., 1953), by McGraw and Shapiro Carr (page images at HathiTrust)
• Simplified methods for computing stresses in rigid frame buildings, ([Philadelphia, Pa., Lefax (inc.), 1938]), by Sheldon A. Keast (page images at HathiTrust)
• Design of rigid frames : Parts 1-2 / (Scranton, Pa. : International Textbook Co., c1942), by Meyer Hirschthal (page images at HathiTrust; US access only)
• Wood structural design data. ([Washington], 1948-), by National Lumber Manufacturers Association (page images at HathiTrust; US access only)
• Bed shear stress coefficient within the surf zone / (Monterey, Calif. : Naval Postgraduate School, 1977), by Carlos Severino Veitia Garcia (page images at HathiTrust)
• The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (New York, J. Wiley & sons, 1893), by A. Jay Du Bois (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of civil engineering at the Rensselaer polytechnic institute. (New York, J. Wiley & sons, 1880), by William H. Burr (page images at HathiTrust)
• Bending of a circular sandwich plate by load applied through an insert / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1973), by Henry M. Montrey (page images at HathiTrust)
• Effect of deformed shanks, prebored lead holes, and grain orientation on the elastic bearing constant for laterally loaded nail joints / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Thomas Lee Wilkinson and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Bending properties of four-layer nail-laminated posts / (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1994]), by G. D. Williams, R. C. Moody, David R. Bohnhoff, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Fiber stress values for design of glulam timber utility structures / (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1995]), by Roland Hernandez, Robert H. Falk, R. C. Moody, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Machine stress rating : practical concerns for lumber producers / (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1977), by W. L. Galligan, Gerald W Crow, Delos V Snodgrass, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Stresses in rock outcrops near Atlanta, Ga. / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Verne E. Hooker, Wilbur I. Duvall, and United States Bureau of Mines (page images at HathiTrust)
• Evaluation of residual stress. (New York : McGraw-Hill Book Co., 1948), by Kalman Heindhofer (page images at HathiTrust)
• Modern timber engineering, (New Orleans : Southern Pine Association, [c1963]), by Walter Fleming Scofield, William A. Oliver, and William Howard O'Brien (page images at HathiTrust)
• Theory of flow and fracture of solids (New York, McGraw-Hill, 1950-[63]), by Arpád Nádai (page images at HathiTrust)
• Advanced mechanics of materials, (New York, London, McGraw-Hill Book Company, inc., 1946), by Glenn Murphy (page images at HathiTrust)
• Elastic and plastic properties of soils and their influence on the continuous support of rigid pavements, (Mariemont, Ohio, Ohio River Division Laboratories, 1954), by Spencer J. Buchanan, Fuad I. Khuri, and United States Army Corps of Engineers (page images at HathiTrust)
• Mechanics of materials / (New York : McGraw-Hill, c1963), by K. Pete Arges and Aubrey E. Palmer (page images at HathiTrust)
• Piping stress calculations simplified. (Lake Success, N.Y., c1951), by Siegfried Werner Spielvogel (page images at HathiTrust)
• Moments and shears in a force fitted rectangular plate, general model. ([Santa Monica, Calif.], 1962), by Douglas Aircraft Company. Missile and Space Systems Division and G. Stoffmacher (page images at HathiTrust)
• Mechanical behavior of engineering materials. (Englewood Cliffs, N.J. : Prentice-Hall, 1962), by Joseph Marin (page images at HathiTrust)
• Deflection and stresses of tapered wood beams, (Madison, Wis., U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1965), by A. Carl Maki, Edward W. Kuenzi, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Statics and strength of materials : an intergrated presentation. (New York : Wiley, 1954), by Roland Henry Trathen (page images at HathiTrust)
• Fundamentals of stress analysis / (Los Angeles : Aero PUblishers, 1960), by Albert Deyarmond and Albert Arslan (page images at HathiTrust)
• Principles of experimental stress analysis. (New York, Prentice-Hall, 1954), by Mark B. Moore (page images at HathiTrust)
• Bending stresses due to torsion in cantilever box beams / (Washington, D.C. : National Advisory Committee for Aeronautics, 1935), by Paul Kuhn and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Some elementary principles of shell stress analysis with notes on the use of the shear center / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Paul Kuhn and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Steel structures, stresses in simple structures. (New York : McGraw-Hill, 1926), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust)
• Elastic response to blast loading of strain-rate dependent cantilevers /, by W. E. Baker, B. J. Lindenberger, John W. Hanna, U.S. Atomic Energy Commission, and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• Gravitational stresses in a disk supported at the ends of the horizontal diameter /, by G. Horvay, Hillel Poritsky, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stresses and deflections of framework under action of forces and moments /, by G. Horvay, R. T. Gray, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Deformations and stresses in circular cylindrical shells caused by pipe attachment., by M. T. Roche, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Derivation of equations for the stresses and strains in a cylindrical viscoelastic case-bonded grain /, by A. S. Elder, U.S. Army Ballistic Research Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Tables of self-equilibrating functions and some applications /, by G. Horvay, J. S. Born, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Solution of beam problems by biharmonic polynomials which separate the effects of boundary shears and boundary normal stresses /, by G. Horvay, J. S. Born, R. T. Gray, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Stresses in a semi-infinite thin-walled cylinder caused by an exponential temperature distribution /, by W. E. Cooper, J. L. Noble, M. T. Roche, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• The end problem of rectangular strips /, by G. Horvay, Knolls Atomic Power Laboratory, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Timber engineers' handbook. (New York, J. Wiley, [c1948]), by Howard James Hansen (page images at HathiTrust)
• Stresses around rectangular cut-outs in skin-stringer panels under axial loads - II / (Langley Field, VA : Langley Memorial Aeronautical Laboratory, 1943), by Paul Kuhn, Simon H. Diskin, John E. Duberg, United States. National Advisory Committee for Aeronautics, and Langley Aeronautical Laboratory (page images at HathiTrust)
• Determination of the stress concentration factor of a stepped shaft stressed in torsion by means of precision strain gages / (Washington, D.C. : NACA, 1947), by A. Weigand and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stress lines in beams of unsymmetrical cross section. (Media, Pa., 1918), by C. M. Broomall (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures : and their strength, consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. / (New York : D. Van Nostrand, 1869), by William Humber (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures, and their strength : consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. etc. / (London : Crosby Lockwood and Co., 1880), by William Humber (page images at HathiTrust)
• Load concentrations on steel floor joists of wood floor highway bridges, (Ames, Ia., Iowa State College of Agriculture and Mechanic Arts, [1919]), by T. R. Agg and Charles Sabin Nichols (page images at HathiTrust)
• Preliminary impact studies--Skunk River bridge on the Lincoln highway near Ames, Iowa / (Ames : Iowa State College of Agriculture and Mechanic Arts, [1922]), by Almon Homer Fuller (page images at HathiTrust)
• The strains in framed structures, with numerous practical applications to cranes--bridge, roof and suspension trusses--braced arches--pivot and draw spans--continuous girders, etc. Also, determination of dimensions and designing of details--specifications and contracts--complete designs and working drawings. (New York, Wiley, 1891), by A. Jay Du Bois (page images at HathiTrust)
• Ice cap strains and some effects on engineering structures / (Hanover, N.H. : U.S. Army Materiel Command, Cold Regions Research & Engineering Laboratory, 1967), by Malcolm Mellor and Sherwood C. Reed (page images at HathiTrust)
• Methods for determining in situ deformation of rock masses / (Denver, Colo. : Geotechnical Branch, Division of Research and Laboratory Services, Engineering and Research Center, U.S. Dept. of the Interior, Bureau of Reclamation ; Springfield, Va. : Available from N.T.I.S., [1988]), by Ronald W. Luehring and Engineering and Research Center (U.S.). Geotechnical Branch (page images at HathiTrust)
• Die schwingungen eines trägers mit bewegter last. (Berlin : [s.n.], 1896), by Heinrich Zimmermann (page images at HathiTrust; US access only)
• The strains on structures of ironwork; with practical remarks on iron construction. (London, J. Weale, 1867), by F. W. Sheilds (page images at HathiTrust)
• Evolution of tensile design stresses for lumber / (Madison, Wis. : Forest Products Laboratory, 1979), by W. L. Galligan, Robert L. Ethington, C. C. Gerhards, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Soil pressure cell investigation : interim report. (Vicksburg, Miss. : Waterways Experiment Station, 1944), by Waterways Experiment Station (U.S.) and United States Army Corps of Engineers (page images at HathiTrust)
• Theory of notch stresses: principles for exact calculation of strength with reference to structural form and material. (Oak Ridge, Tenn., USAEC Office of Technical Information, 1961]), by Heinz Neuber (page images at HathiTrust)
• The dynamics of particles and of rigid elastic, (New York, Dover Publications, [1959]), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• The experimental verification of theory for suspension bridge analysis (Salem, Oregon State highway commission, 1942), by Conde B. McCullough, Richard Rosecrans, and Glenn Stewart Paxson (page images at HathiTrust; US access only)
• TECO design manual for TECO timber connector construction. (Washington, D.C. : Timber Engineering Company, c1962), by Timber Engineering Company (page images at HathiTrust; US access only)
• Liste des membres de la commission d'organisation, membres du comité de patronage, dignitaires, donateurs et adhérents. Procès-verbaux in extenso des séances du Congrès, (Paris : Vve C. Dunod, 1901), by Congrès international des méthodes d'essai des matériaux de construction (1900 : Paris), Louis Lucien Baclé, Paul Debray, and France) Exposition universelle internationale de 1900 (Paris (page images at HathiTrust; US access only)
• The strains in framed structures with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings / (New York : Wiley, 1892, c1890), by A. Jay Du Bois (page images at HathiTrust)
• Progress report. ([S.l.], 1918), by Special Committee on Stresses in Railroad Track (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts / (New York : John Wiley & Sons ; London : Chapman & Hall, 1904, c1895), by Mansfield Merriman (page images at HathiTrust; US access only)
• Manual on experimental stress analysis techniques. (Cambridge, Mass. : [s.n.], c1957), by Society for Experimental Stress Analysis (page images at HathiTrust; US access only)
• The graphic method by influence lines for bridge and roof computations / (New York, J. Wiley, 1905), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• Proceedings, of the Society for Experimental Stress Analysis. (Cambridge, Mass.), by Society for Experimental Stress Analysis, Eastern Photoelasticity Conference. Proceedings, and Society for Experimental Stress Analysis. Experimental stress analysis; proceedings of the Society for Experimental Stress Analysis (page images at HathiTrust)
• Application de la résistance des matériaux au calcul des avions, (Paris : Gauthier-Villars et cie., 1921), by L. Boilève (page images at HathiTrust; US access only)
• Application of multivariable search techniques to structural design optimization / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Robert T. Jones, D. S. Hague, Langley Research Center, and Aerophysics Research Corporation (page images at HathiTrust)
• Analysis of frame-reinforced cylindrical shells, (Washington, National Aeronautics and Space Administration, 1960), by Richard H. MacNeal and John A. Bailie (page images at HathiTrust)
• Weld stresses beyond elastic limit : materials discontinuity / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by V. Verderaime and George C. Marshall Space Flight Center (page images at HathiTrust)
• An improved method for optimum design of mechanically and thermally loaded structures / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Howard M. Adelman, R. Narayanaswami, Joanne L. Walsh, and Langley Research Center (page images at HathiTrust)
• Analysis of bonded joints / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by S. Srinivas and Langley Research Center (page images at HathiTrust)
• Ring-baffle pressure distribution and slosh damping in large cylindrical tanks / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Harland F. Scholl, Phillip K. Davis, David G. Stephens, and Langley Research Center (page images at HathiTrust)
• Application of the energy test to the collapse of a long thin pipe under external pressure ... ([Cambridge, 1889]), by George Hartley Bryan (page images at HathiTrust)
• Kontinuierliche Balken mit konstantem Trägheitsmoment / (Zürich : Schulthess & Co., 1916), by Gustav Griot (page images at HathiTrust; US access only)
• Structural behavior analysis, Canyon Ferry Dam, 1951-1964 / (Denver, Colo. : U.S. Dept. of the Interior, Bureau of Reclamation, Division of Design, 1966), by Keith Jones, Louis H. Roehm, Missouri River Basin Project (U.S.), and Engineering and Research Center (U.S.). Division of Design (page images at HathiTrust)
• Stress and strain distributions in a thick-walled cylinder of strain-hardening material, elastic-plastically strained by internal pressure / (Washington, D.C. : NASA ; Springfield, Va. : Sold by Clearinghouse for Federal Scientific and Technical Information, 1965), by C. K. Liu (page images at HathiTrust)
• Shear-stress intensity factors for elastic sheets with cover plates / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by W. B. Fichter and Langley Research Center (page images at HathiTrust)
• Mixed formulation for frictionless contact problems / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Ahmed Khairy Noor and Kyun O. Kim (page images at HathiTrust)
• Stresses at the tip of a longitudinal crack in a plate strip / (Washington : National Aeronautics and Space Administration, 1967), by W. B. Fichter (page images at HathiTrust)
• Supersonic flutter of panels loaded with inplane shear / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by James Wayne Sawyer and Langely Research Center (page images at HathiTrust)
• Application of boundary integral method to elastoplastic analysis of V-notched beams / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Walter Rzasnicki and Lewis Research Center (page images at HathiTrust)
• Analysis of the three-point-bend test for materials with unequal tension and compression properties / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by C. C. Chamis and Lewis Research Center (page images at HathiTrust)
• Free vibrations of thin-walled semicircular graphite-epoxy composite frames / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Ahmed Khairy Noor, Jeanne M. Peters, Huey D. Carden, and Langley Research Center (page images at HathiTrust)
• Prestressed monolithic and segmented brittle structures / ([Washington] : National Aeronautics and Space Administration, [1964]), by Robert L. Barrnett, James Costello, Paul Hermann, IIT Research Institute, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Thermal-structural combined loads design criteria study / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by V. Deriugin, Langley Research Center, and Boeing Company (page images at HathiTrust)
• [A] handy book for the calculation of strains in girders & similar structures & their strength : consisting of formulæ & corresponding diagrams ... (London, 1885), by William Humber (page images at HathiTrust)
• Effect of residual stresses induced by prestressing on rolling-element fatigue life / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Richard J. Parker, Erwin V. Zaretsky, and Lewis Research Center (page images at HathiTrust)
• High-temperature strength of refractory-metal wires and consideration for composite applications / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Donald W. Petrasek and Lewis Research Center (page images at HathiTrust)
• Buckling and vibration analysis of a simply supported column with a piecewise constant cross section / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1991), by Mark S. Lake, Martin M. Mikulas, and Langley Research Center (page images at HathiTrust)
• Plate and butt-weld stresses beyond elastic limit, material and structural modeling / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1991), by V. Verderaime and George C. Marshall Space Flight Center (page images at HathiTrust)
• Elastic stability of laminated, flat and curved, long rectangular plates subjected to combined inplane loads / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by A. V. Viswanathan, L. L. Baker, M. Tamekuni, Langley Research Center, and Boeing Commercial Airplane Company (page images at HathiTrust)
• Application of boundary integral method to elastic analysis of V-notched beams / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Walter Rzasnicki, Lynn U. Albers, Alexander Mendelson, and Lewis Research Center (page images at HathiTrust)
• Stress-intensity factors for single-edge-notch specimens in bending or combined bending and tension by boundary collocation of a stress function / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Office of Technical Services, Dept. of Commerce], 1965), by Bernard Gross, John E. Srawley, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Effects of eccentricities and lateral pressure on the design of stiffened compression panels (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by Gary L. Giles, Melvin S. Anderson, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Method for measuring static Young's modulus of tungsten to 1900 K / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972), by William T. Harrigill, Alois Krsek, and Lewis Research Center (page images at HathiTrust)
• Effects of sigma-phase formation on some mechanical properties of a wrought nickel-base superalloy (IN-100) / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Robert L. Dreshfield, Richard L. Ashbrook, and Lewis Research Center (page images at HathiTrust)
• A method for determining local elastoplastic stress and strain in metallurgically bonded notched laminates subjected to a loading cycle / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by J. A. Sova, John H. Crews, and Langley Research Center (page images at HathiTrust)
• An elastoplastic analysis of a uniaxially loaded sheet with an interference-fit bolt / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by John H. Crews and Langley Research Center (page images at HathiTrust)
• Stress-rupture strength and microstructural stability of tungsten-hafnium-carbon-wire-reinforced superalloy composites / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Donald W. Petrasek, Robert A. Sigorelli, and Lewis Research Center (page images at HathiTrust)
• Cyclic debonding of unidirectional composite bonded to aluminum sheet for constant-amplitiude loading / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1976), by George L. Roderick, John H. Crews, Richard A. Everett, and Langley Research Center (page images at HathiTrust)
• A finite-difference program for stresses in anisotropic, layered plates in bending / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Nicholas J. Salamon and George C. Marshall Space Flight Center. Structures and Propulsion Laboratory (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley, 1899), by J. B. Johnson, C. W. Bryan, and F. E. Turneaure (page images at HathiTrust)
• Les grandes vitesses des chemins de fer : Les oscillations du matériel et la voie. (Paris, 1906), by Georges Marié (page images at HathiTrust; US access only)
• Updating of fillet weld strength parameters for commercial shipbuilding. ([Washington, D.C.] : Ship Structure Committee ; [Springfield, Va. : National Technical Information Service, distributor], 1984), by Newport News Shipbuilding and Dry Dock Company and United States. Ship Structure Committee (page images at HathiTrust)
• Stresses in structures and the accompanying deformations. (New York: John Wiley & Sons;, 1908), by A. H. Heller (page images at HathiTrust)
• The use of soap films in solving torsion problems / (London : Institution, [1917]), by Alan Arnold Griffith and Geoffrey Ingram Taylor (page images at HathiTrust; US access only)
• Pressures in Silos ; methods of computing pressures in silos / (Berlin : William Ernst & Son ;, 1920), by E Lufft (page images at HathiTrust; US access only)
• Bond stress in reinforced concrete beams / (1915), by Robert Edgar Turley (page images at HathiTrust; US access only)
• Determination of the distribution of stresses and reactions in wide reinforced concrete beams / (1913), by Otto Coffeen Fitz Randolph (page images at HathiTrust; US access only)
• An investigation of the stresses in cantilever flat slabs / (1914), by George Alfred Maney (page images at HathiTrust; US access only)
• Metallic compression members / (1912), by Raymond J. Roark (page images at HathiTrust; US access only)
• Secondary stresses / (1913), by Joseph Earl Huber (page images at HathiTrust; US access only)
• Statically indeterminate stresses / (1908), by Lewis McDonald (page images at HathiTrust; US access only)
• Statically indeterminate stresses in stiff framed structures / (1915), by Frank E. Richart (page images at HathiTrust; US access only)
• Strength of concrete in shear and compression / (1906), by Julius Ernest Schoeller and Norman Edward Seavert (page images at HathiTrust; US access only)
• Stresses in railway structures on curves / (1916), by Kaimin Kay Feng (page images at HathiTrust; US access only)
• Stresses in structural steel angles : with special tables / ([New York : John Wiley & Sons, 1918]), by L. A. Waterbury (page images at HathiTrust)
• Stresses in wire ropes bent over sheaves / (1910), by William Francis Coleman and Daniel Maltby Rugg (page images at HathiTrust; US access only)
• The use of the strain gage to determine stresses in steel structures / (1914), by George Paul Boomsliter (page images at HathiTrust; US access only)
• Wind stresses in the steel frames of office buildings / (1917), by Camillo Weiss (page images at HathiTrust; US access only)
• An investigation of web stresses in reinforced concrete beams / (1911), by William Iverson Hargis (page images at HathiTrust; US access only)
• Stress-strain relations in snow under triaxial compression / (Wilmette, Ill. : Snow, Ice and Permafrost Research Establishment, Corps of Engineers, U.S. Army, 1955), by J. K. Landauer (page images at HathiTrust)
• The behavior of fillet welds when subjected to bending stresses ... ([New York, 1935]), by Norman G. Schreiner and American Welding Society. Structural Steel Welding Research Committee (page images at HathiTrust; US access only)
• The torsional effect of transverse bending loads on channel beams, (Urbana, Ill. : University of Illinois, [1930]), by Fred B. Seely, William Louis Schwalbe, and William James Putnam (page images at HathiTrust; US access only)
• Trusses and arches analyzed and discussed by graphical methods / (New York : J. Wiley, 1891-1899), by Charles E. Greene (page images at HathiTrust)
• Strength and deformability of rocks at low temperatures / (Hanover, N.H. : Corps of Engineers, U.S. Army, Cold Regions Research and Engineering Laboratory, 1971), by Malcolm Mellor and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Torus analysis / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, [1954]), by R. L. Mathews, G. Horvay, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Preliminary investigation of the structural influence of entry-entry intersections and inhomogeneous intial stress fields on repository disposal rooms / (Springfield, Va. : National Technical Information Service, 1983), by Marc C. Loken, RE/SPEC Inc, and Battelle Memorial Institute. Office of Nuclear Waste Isolation (page images at HathiTrust)
• Structural behavior measurements of tunnel liners, Spring Creek power conduit / (Denver, Colo. : United States Department of the Interior, Bureau of Reclamation, 1968), by George C. Rouse and United States. Bureau of Reclamation. Dams Branch (page images at HathiTrust)
• The mechanics of engineering. (New York, J. Wiley & sons; [etc., etc.], 1902-), by A. Jay Du Bois (page images at HathiTrust; US access only)
• Recommended building code requirements for working stresses in building materials. Report of Building code committee. June 1, 1926 ... Bureau of standards. (Washington, Govt. print. off., 1926), by United States. Dept. of Commerce. Building Code Committee, Ira H. Woolson, and United States. Dept. of Commerce. Elimination of waste series (page images at HathiTrust)
• Thermal stress in the ISHR pressure vessel / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Extension, [1955]), by Irving Spiewak, U.S. Atomic Energy Commission, and Oak Ridge National Laboratory (page images at HathiTrust)
• Stresses in rings. ([Washington, D.C.?] : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1958]), by J. Walter Joseph, Savannah River Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Influence of alloying upon grain-boundary creep / (Washington, D.C. : National Advisory Committee for Aeronautics, [1956]), by F. N. Rhines, M. A. Kissel, W. E. Bond, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Preliminary investigation of the failure of pressurized stiffened cylinders / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Norris F. Dow, Roger W. Peters, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The torque and wear charactersitics of water-lubricated ball bearings / (Columbus, OH : Battelle Memorial Institute, [1957]), by William H. Goldthwaite, C. Malcolm Allen, David W. Knoll, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• A numerical method for the stress analysis of stiffened-shell structures under nonuniform temperature distributions / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Richard R. Heldenfels and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Charts and approximate formulas for the estimation of aeroelastic effects on the loading of swept and unswept wings / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Franklin W. Diederich, Kenneth A. Foss, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Creep in metals / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by A. D. Schwope, L. R. Jackson, F. R. Shober, United States. National Advisory Committee for Aeronautics, and Battelle Memorial Institute (page images at HathiTrust)
• A special investigation to develop a general method for thee-dimensional photoelastic stress analysis / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Max Mark Frocht, R. Guernsey, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The effect of lateral inertia on the propagation of plastic strain in a cylindrical rod / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1964), by G. P. DeVault, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Investigation of the improved Carlson stress meter : report 2 : supplementary tests / (Vicksburg, Miss. : Waterways Experiment Station, 1966), by Ernest E. McCoy, Waterways Experiment Station (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• An effective stress model for ground motion calculations : final report / (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; Springfield, Va. : Available from National Technical Information Service, 1979), by George Y. Baladi, United States. Defense Nuclear Agency, and Waterways Experiment Station (U.S.). Structures Laboratory (page images at HathiTrust)
• Concrete quality assurance using accelerated strength testing / (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; [Springfield, Va. : available from NTIS, 1984]), by Steven A. Ragan, Structures Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. (Vicksburg, Miss. : Waterways Experiment Station, 1969), by Gayle E. Albritton, K. M. Cole, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials / (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station, [1978]), by George Y. Baladi, Geotechnical Laboratory (U.S.), and United States. Assistant Secretary of the Army (R & D) (page images at HathiTrust)
• Loading rate effects on compressibility of sand : final report / (Vicksburg, Miss. : U.S. Army Engineer Waterways Experiment Station ; Springfield, Va. : Available from National Technical Information Service, 1979), by John Guy Jackson, Behzad Rohani, John Q. Ehrgott, United States. Defense Nuclear Agency, and Waterways Experiment Station (U.S.). Structures Laboratory (page images at HathiTrust)
• Equipment and test procedure for determining multiaxial tensile and combined tensile-compressive strength of concrete / (Vicksburg, Mississippi : U.S. Waterways Experiment Station Experiment Station, 1974), by K. L. Saucier (page images at HathiTrust)
• Results of high-temperature strain-fatigue tests on reactor-grade aluminum-base materials / (Canoga Park, California : Atomics International, [1961]), by W. F. Anderson, W. Wahl, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stress analysis of HNPF loading-face shield / (Canoga Park, California : Atomics International, [1960]), by R. D. Chipman, R. M. Peterson, M. D. Lynch, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Torsional vibrations of hollow thin-walled cylindrical beams / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Edwin T. Kruszewski, Eldon E. Kordes, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strain measurements and strength tests of 25-inch diagonal-tension beams with single uprights / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by James P. Peterson, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A preliminary investigation of the tensile properties of beryllium couplings /, by J. Greenspan, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Stresses in rings / ([Aiken, South Carolina] : E.I. du Pont de Nemours & Company, Savannah River Laboratory, 1957), by John W. Walker, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Tapped holes in beryllium / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation., 1961), by A.D. Feith, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Pressure loads produced on a flat-plate wing by rocket jets exhausting in a spanwise direction below the wing and perpendicular to a free-stream flow of Mach number 2.0 / (Washington, D.C. : National Advisory Committee for Aeronautics, 1958), by Ralph A. Falanga, Joseph J. Janos, Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
• The Lateral stability of equal-flanged aluminum-alloy I-beams subjected to pure bending / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1940), by C. Dumont, H. N. Hill, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The tensile properties of uranium in the inelastic range of stress / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service ; [Washington, D.C. : U.S. Government Printing Office, 1956]), by Robert Wells Lewis, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Vibration and pressure-cell tests, flood-control intake gates, Fort Randall Dam, Missouri River, South Dakota / (Vicksburg, Miss. : Waterways Experiment Station, 1956), by Waterways Experiment Station (U.S.), United States Army Corps of Engineers, and United States. Army. Corps of Engineers. Omaha District (page images at HathiTrust)
• Investigation of the improved Carlson stress meter. (Vicksburg, Miss. : Waterways Experiment Station, 1957), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. (Vicksburg, Miss. : Waterways Experiment Station, 1969), by Gayle E. Albritton, K. M. Cole, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 7 : static tests of deep slabs having various span-to-thickness ratios / (Vicksburg, Miss. : Waterways Experiment Station, 1971), by James E. Beavers, Gayle E. Albritton, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Correlation of experimental data with theory for perforated plates with a triangular hole array / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1958), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Analysis and assessment of major uncertainties associated with ship hull ultimate failure. ([Washington, D.C.] : Ship Structure Committee ; [Springfield, VA : National Technical Information Service, distributor], 1984 [i.e. 1985]), by United States. Ship Structure Committee, United States Coast Guard, and Inc Hydromechanics (page images at HathiTrust)
• Analysis of stresses at the bore of a drilled ball operating in a high-speed bearing / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by Harold H. Coe, John E. Lynch, and Lewis Research Center (page images at HathiTrust)
• Minimum live loads allowable for use in design of buildings. (Washington, Govt. print. off., 1925), by United States. Dept. of commerce. Building code committee, Ira H. Woolson, United States. Dept. of Commerce. Elimination of waste series, and United States. National Bureau of Standards (page images at HathiTrust)
• Preliminary results of stability calculations for the bending of box beams with longitudinally stiffened covers connected by posts / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Roger A. Anderson, Aldie E. Johnson, Wilder Thomas W., Langley Aeronautical Laboratory, and United States. National Adviosry Committee for Aeronautics. NACA research memorandum (page images at HathiTrust)
• Numerical solution of reactor stress problems / (Columbus, OH : Battelle Memorial Institute ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce, [1961]), by Robert F. Redmond, Richard W. Clark, Lewis E. Hulbert, U.S. Atomic Energy Commission, and Battelle Memorial Institute (page images at HathiTrust)
• Investigation of influence of chemical composition on forged modified low-carbon N-155 alloys in solution-treated and aged condition as related to rupture properties at 1200©� F / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by E. E. Reynolds, A. E. White, J. W. Freeman, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Effect of combined stress on yield and fracture behavior of zircaloy-2 / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1959), by R. L. Mehan, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Calculation of mechanical behavior of materials through true stress-true strain relationships / (Canoga Park, California : Atomics International, [1962]), by W. J. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Beryllium-clad uranium elements, fabrication development by multi-temperature extrusion, and dimensional stability on thermal cycling /, by J. Greenspan, Inc Nuclear Metals, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Shear-lag tests of a box beam with a highly cambered cover in tension / (Washington, D.C. : National Advisory Committee for Aeronautics, [1945]), by James P. Peterson, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Subsurface accelerations and strains from an underground detonation. ([Sandia Base, Alburquerque, New Mexico], [Armed Forces Special Weapons Project, U.S. Headquarters Field Command], [1959]), by F. A. Pieper, R. H. Sievers, A. C. Tiemann, United States. Army. Engineer Research and Development Laboratories, U.S. Army Ballistic Research Laboratory, and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Improving the distribution and reducing the magnitude of pavement damage / (Washington, D.C. : The Administration ; Springfield, Va. : National Technical Information Service [distributor], 1980), by United States. Federal Highway Administration. Structures and Applied Mechanics Division (page images at HathiTrust)
• Analysis of stress and strain distributions in triaxial tests using the method of finite elements / (Vicksburg, Miss. : Waterways Experiment Station, 1973), by Narayanaswamy Radhakrishnan (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 9 : summary report / (Vicksburg, Miss. : Waterways Experiment Station, 1973), by Gayle E. Albritton, Roger D. Crowson, Waterways Experiment Station (U.S.). Weapons Effects Laboratory, and United States. Defense Nuclear Agency (page images at HathiTrust)
• Measurements of stress and strain during one-dimensional compression of large compacted soil and rockfill specimens / (Vicksburg, Miss. : Waterways Experiment Station, 1971), by M. W. C. Emerson, A. J. Hendron, and University of Illinois (Urbana-Champaign campus). Department of Civil Engineering (page images at HathiTrust)
• Thermal-stress ratchet mechanism in pressure vessels / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1959), by D.R. Miller, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Cyclic strain fatigue of Inconel at 75 to 600°F / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1960), by A. E. Dinerman, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Inelastic stress in a long cylindrical shell under a band of pressure / (Canoga Park, California : Atomics International, [1962]), by T. C. Yen, W. F. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Yielding and flow of sapphire ([alpha]-A1b2sOb3s) crystals / (Canoga Park, California : Atomics International, [1961]), by H. Conrad, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Tests of 10 inch 24S-T aluminum-alloy shear panels with 1-1/2 inch holes. 2 - Panels having holes with notched edges / (Washington, D.C. : National Advisory Committee for Aeronautics, [1944]), by Paul Kuhn, L. Ross Levin, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The extremum principles of the mathematical theory of elasticity and their use in stress analysis. (Seattle : University of Washington Press, [1951]), by William Prager (page images at HathiTrust; US access only)
• Stress-life relation of the rolling-contact fatigue spin rig / (Washington : National Advisory Committee for Aeronautics, [1957]), by Robert H. Butler, Thomas L. Carter, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Thermal stress analysis of a cylinder of semi-plastic material / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1956), by Donald Hunter, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Experimental stress analysis of a circular bubble chamber window with a beveled mounting / (Madison, Wis. : Midwestern Universities Research Association ; Washington, D.C. : Available from the Office of Technical Services, U.S. Dept. of Commerce, [1961]), by Andres Peekna, John W Mark, U.S. Atomic Energy Commission, and Midwestern Universities Research Association (page images at HathiTrust)
• Bearing strength of wood at angle to the grain / (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1956), by Forest Products Laboratory (U.S.), University of Wisconsin, and United States Forest Service (page images at HathiTrust)
• Photoelastic studies of crack propagation and crack arrest /, by George Rankin Irwin, U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research, and College Park. Department of Mechanical Engineering University of Maryland (page images at HathiTrust)
• The analysis of continuous frames by the method of restraining stiffnesses, (San Francisco, W. H. Ellison, Earle Russell, consulting structural engineers, 1932), by Earle Brewster Russell (page images at HathiTrust)
• Dynamic response of materials to intense impulsive loading. ([Wright Patterson Air Force Base, Ohio, Air Force Materials Laboratory, 1973]), by Pei Chi Chou and Alan K. Hopkins (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1905), by William H. Burr and Myron Samuel Falk (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges / (New York : Wiley, 1888), by William H. Burr (page images at HathiTrust)
• Airplane design; (Lafayette, Ind., The author, c1943), by K. D. Wood (page images at HathiTrust; US access only)
• The dynamics of particles and of rigid, elastic, and fluid bodies. : Being lectures on mathematical physics / (Leipzig : B. G. Teubner; New York : G. E. Stechert; [etc., etc.], 1912), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• Some observations of the distribution of stress in the vicinity of a crack in the center of a plate /, by L. R. Jackson and issuing body Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Continued observations on the distribution of stress in the vicinity of a crack in the center of a plate : supplement to DMIC memorandum 178 /, by L. R. Jackson and issuing body Defense Metals Information Center (U.S.) (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs ... (New York, J. Wiley & son, 1873), by De Volson Wood (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice. (New York, J. Wiley & sons, 1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials / (London : Longmans, Green, 1873), by Bindon B. Stoney (page images at HathiTrust)
• Theory of transverse strains and its application in the construction of buildings. : Including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... / (New York : J. Wiley & sons, 1877), by R. G. Hatfield (page images at HathiTrust)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... (New York, J. Wiley & sons, 1877), by Jakob J. Weyrauch, Robert Henry Thurston, and A. Jay Du Bois (page images at HathiTrust)
• The Winslow tables. Diagrams for calculating the strength of wood, steel, and cast-iron beams and columns, (New York, The Engineering news publishing company, 1900), by Benjamin E. Winslow (page images at HathiTrust)
• The statics ratio for analysis of frames that deflect, (Austin, The University, 1950), by Phil Moss Ferguson and Ardis H. White (page images at HathiTrust; US access only)
• Resistance of structural clay masonry to dynamic forces; a design manual for blast resistance. (Geneva, Ill., Structural Clay Products Research Foundation, 1958), by Clarence B. Monk (page images at HathiTrust; US access only)
• Translation key to Kleinlogel's Mehrstieligs Raluneo (Multi-column frames) v. 1 and 2. (New York, F. Ungar Pub. Co., [c1948]), by Fred Blum and Adolf Kleinlogel (page images at HathiTrust)
• Druckverhältnisse in Silozellen, ein Beitrag zur Berechnung von Silos. (Berlin, Ernst, 1920), by E. Lufft (page images at HathiTrust; US access only)
• Gripped-end effect in tension proof testing of dimension lumber / (Madison, WI : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1991]), by Angela M. Terry and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Abaques; des efforts tranchants, et des moments de flexion développés dans les poutres à une travée par les surcharges du règlement du 29 août 1891 sur les ponts métalliques. (Paris, G. Carré & C. Naud, 1899), by Marcelin Duplaix (page images at HathiTrust; US access only)
• Recherches analytiques sur la flexion et la résistance des pièces courbes : accompagnées de tables numériques pour calculer la poussée des arcs chargés de poids d'une manière quelconque, et leur pression maximum sous une charge uniformément rèpartie / (Paris : Mallet-Bachelier, imprimeur-libraire ; Carilian-Goeury et Vr Dalmont, libraires, 1854), by Jacques Antoine Charles Bresse (page images at HathiTrust)
• Pressure and thermal stresses at a pipe attachment to a sphere / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, [1959]), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Bending of circular plates under a variable symmetrical load / (Argonne, Ill. : Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Bending of circular plates under a uniform load on a concentric circle / (Argonne, Ill. : Argonne National Laboratory, Particle Accelerator Division, 1964), by J. C. Heap and Argonne National Laboratory (page images at HathiTrust)
• Analysis of stresses in bellows / (Canoga Park, California : Atomics International, [1964-1965]), by W. F. Anderson, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Compression of rectangular blocks, ([New York, 1931]), by J. N. Goodier (page images at HathiTrust; US access only)
• Concrete cradles for large pipe conduits / (Ames : Iowa State College, 1926), by W. J. Schlick and James Whitmore Johnson (page images at HathiTrust; US access only)
• The dynamics of particles and of rigid, elastic and fluid bodies. Being lectures on mathematical physics, (New York, Stechert, 1922), by Arthur Gordon Webster (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, (New York, J. Wiley & sons; [etc., etc.], 1908), by William H. Burr and Myron S. Falk (page images at HathiTrust; US access only)
• Statische Berechnung von Tunnelmauerwerk, Grundlagen und Anwendung auf die wichtigsten Belastungsfälle ... (Berlin, W. Ernst, 1912), by Otto Kommerell (page images at HathiTrust; US access only)
• Beton-und Stahlbetonbau. (Berlin : W.Ernst, 1901-), by Germany) Deutscher Beton-Verein (Wiesbaden (page images at HathiTrust; US access only)
• Increments of finite strain. (East Pittsburg, Pa. : Westinghouse Research Laboratories, [1951]), by Evan A. Davis (page images at HathiTrust; US access only)
• Stresses in thick slabs subjected to thermal loadings / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1965), by Robert I. Brasier, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Photoelastic analysis of three-dimensional stress systems using scattered light, (Washington, 1939), by Royal Weller and J. K. Bussey (page images at HathiTrust; US access only)
• Mechanical behavior of sea ice / ([Hanover, N.H.] : US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, [1983]), by Malcolm Mellor and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• Correlation of creep-buckling tests with theory / (Washington, D.C. : National Advisory Committee for Aeronautics, 1956), by Sharad A. Patel and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Effects of multiaxial stretching on crazing and other properties of transparant plastics / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Irvin Wolock, Desmond Ivan George, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Plane-strain distribution of stress in elastic media, (Ames, Ia. : Iowa State College of Agriculture and Mechanic Arts, [1941]), by Dio Lewis Holl (page images at HathiTrust; US access only)
• Critical review and interpretation of the literature on plastic (inelastic) behavior of engineering metallic materials, (Urbana : Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Montgomerie Christie Steele (page images at HathiTrust; US access only)
• Die Ermittlung der Nebenspannungen eiserner Fachwerkbrücken : und das praktische Rechnungsverfahren nach Mohr / (Berlin : W. Ernst, 1910), by W. Gehler and Julius Karig (page images at HathiTrust; US access only)
• The theory of strains. A compendium for the calculation and construction of bridges, roofs and cranes, with the application of trigonometrical notes. (Baltimore, Schmidt & Trowe, 1871), by John H. Diedrichs (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (New York : J. Wiley & sons; [etc., etc.], 1892), by Mansfield Merriman (page images at HathiTrust)
• The theory of strains. A compendium for the calculation and construction of bridges, roofs and cranes, with the application of trigonometrical notes. (Baltimore, Schmidt & Trowe, 1871), by John H. Diedrichs (page images at HathiTrust)
• Investigation on buckling of rigid joint structures. (Ithaca, N. Y., 1949), by Cornell University. Dept. of Structural Engineering and P. P. Bijlaard (page images at HathiTrust)
• Column strength of tubes elastically restrained against rotation at the ends, ([Washington, U.S. Govt. print. off.], 1938), by William R. Osgood (page images at HathiTrust; US access only)
• Formulas and tables for architects and engineers in calculating the strains and capacity of structures in iron and wood, (Washington City, W. Choate & Co., 1873), by Franz Schumann (page images at HathiTrust)
• Tables for finding the strains in railway bridge trusses under the action of a concentrated load system. (New York, Wiley, 1885), by A. Jay Du Bois (page images at HathiTrust)
• Der Torsionsindikator / (Berlin : M. Krayn, 1912-), by Paul Nettmann (page images at HathiTrust; US access only)
• A treatise on the strength of bridges and roofs, with practical applications and examples for the use of engineers and students, (New York, D. Van Nostrand, 1873), by Samuel Henry Shreve (page images at HathiTrust)
• The failure of metals under internal and prolonged stress, a general discussion. (London, Faraday Society, 1921), ed. by F. S Spiers (page images at HathiTrust; US access only)
• Strength of beams under transverse loads. (New York, D. Van Nostrand company, 1893), by William Allan (page images at HathiTrust)
• Secondary stresses in bridge trusses. (New York, Wiley, 1908), by C. R. Grimm (page images at HathiTrust)
• Stress distributions in engineering materials. (London, [1921]), by British Association for the Advancement of Science (page images at HathiTrust; US access only)
• Project Pre-GONDOLA I : cratering site calibration series : close-in ground motion, earth stress, and pore pressure measurements /, by J. Donald Day, Walter Charles Sherman, Donald W. Murrell, U.S. Army Engineer Nuclear Cratering Group, U.S. Atomic Energy Commission, and Project Plowshare (U.S.) (page images at HathiTrust)
• Photoelastic studies of crack propagation and crack arrest in polymers and 4340 steel / (Washington, D. C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Virginia. : National Technical Information Service, 1980), by George Rankin Irwin, J. W Dally, J Metcalf, W. L Fourney, T Kobayashi, University of Maryland at College Park. Department of Mechanical Engineering, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : final report, July, 1978-June 1980 / (Washington, D.C. : The Commission : Available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1981), by C. S. Hartley, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Accident Evaluation, and University of Florida. Dept. of Materials Science and Engineering (page images at HathiTrust)
• Properties of reactor materials at constant true strain rates : progress report, July 1, 1977 - June 30, 1978 / ([Washington, D.C.] : U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Reactor Safety Research ; Springfield, Va. : for sale by the National Technical Information Service, [1978]), by C. S. Hartley, University of Florida. Dept. of Materials Science and Engineering, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Analytical and experimental studies of a beam with a geometric nonlinearity / (Washington, D.C. : Division of Reactor Safety Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission ; available from GPO Sales Program, Division of Technical Information and Document Control, U.S. Nuclear Regulatory Commission ; Springfield, Va. : National Technical Information Service, 1980), by Y. A. Mariamy, J. C. Anderson, S. F. Masri, and University of Southern California. Department of Civil Engineering (page images at HathiTrust)
• Puncture of shielded radioactive material shipping containers /, by R Larder, D Arthur, Fuel Cycle U.S. Nuclear Regulatory Commission. Division of Safeguards, Lawrence Livermore Laboratory, United States. National Technical Information Service, and United States Government Printing Office (page images at HathiTrust)
• Local stress-strain approach to cumulative fatigue damage analysis : final report / (Urbana, Ill. : Dept. of Theoretical and Applied Mechanics, University of Illinois, 1974), by JoDean Morrow, N. E. Dowling, J. F. Martin, and University of Illinois at Urbana-Champaign. Department of Theoretical and Applied Mechanics (page images at HathiTrust; US access only)
• The effects of temperature on metals under stress ... ([n. p., 1923]), by William Francis Marande (page images at HathiTrust; US access only)
• Stresses in framed structures, (New York [etc.] McGraw-Hill Book Company, inc., 1923), by George Albert Hool and W. S. Kinne (page images at HathiTrust)
• Graphical analysis of stresses involved in designing frame structures : intended primarily for students of engineering / (Hancock, Mich. : [s.n.], 1923), by George Peter Schubert (page images at HathiTrust)
• [Interim report on ] stress distribution in engineering materials / ([S.l. : s.n.], [1916?]-), by British Association for the Advancement of Science, J.E. Patavel, E.G. Coker, and J. Perry (page images at HathiTrust; US access only)
• Mechanical failures of metals in service / ([Washington, U.S. Govt. Print. Off.], 1954), by John A. Bennett and G. Willard Quick (page images at HathiTrust)
• Studies in mechanics of nonlinear solids / (Livermore, Ca. : Lawrence Radiation Laboratory, 1964), by Richard Dong, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Plane stress problems in the mathematical theory of elasticity / (Livermore, CA : University of California Lawrence Radiation Laboratory, 1965), by Maurice Zaslawsky, Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Livermore Laboratory (page images at HathiTrust)
• Stress distribution around resin-grouted bolts / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1980), by Daryl E. Radcliffe and Raymond E. Stateham (page images at HathiTrust)
• Stress analysis applied to underground mining problems / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1948), by Wilbur I. Duvall (page images at HathiTrust)
• A new method of analysis to obtain exact solutions for stresses and strains in circular inclusions / ([Washington, D.C.] : U.S. Bureau of Mines, [1974]), by Clarence O. Babcock (page images at HathiTrust)
• Stress analysis applied to underground mining problems. ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1948-]), by Wilbur I. Duvall (page images at HathiTrust)
• Generation and propagation of strain waves in rock : part I / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1950), by Leonard Obert and Wilbur I. Duvall (page images at HathiTrust)
• Stress analysis of reinforced circular and rectangular flat plates / (Argonne, Ill. : Argonne National Laboratory, 1965), by James L. S. Chen, Donald A. Moen, Chia-shing Lai, U.S. Atomic Energy Commission. ANL., and Argonne National Laboratory. ANL. (page images at HathiTrust)
• Modulus of elasticity of a rock determined by four different methods / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Francis X. Cannaday (page images at HathiTrust)
• Structural design data for concrete drift linings in block caving stopes / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, [1973]), by J. D. Dixon, Denver Mining Research Center (U.S.). Rock Mass Behavior Group, and United States Bureau of Mines (page images at HathiTrust)
• Photoelastic study of an internally stressed circular opening in a biaxial stress field / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1966), by Martin S. Oudenhoven, George T. Krempasky, and United States Bureau of Mines (page images at HathiTrust)
• Determination of stresses around an underground opening, Climax Molybdenum Mine, Colorado / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by Stephen Utter (page images at HathiTrust)
• Biaxial device for determining the modulus of elasticity of stress-relief cores / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by John Fitzpatrick (page images at HathiTrust)
• Stresses and displacements induced in rock by tunnel boring machine props / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1968]), by Wilbur I. Duvall, Wilson Blake, and United States Bureau of Mines (page images at HathiTrust)
• A geometric method for the prediction of stresses in inclusions, orebodies, and mining systems / ([Washington, D.C.] : U.S. Bureau of Mines, [1974]), by Clarence O. Babcock, Denver Mining Research Center (U.S.), and United States Bureau of Mines (page images at HathiTrust)
• An apparatus for obtaining the tensile properties of irradiated materials at elevated temperatures / (Richland, Wash. : Hanford Atomic Products Operation, 1955), by R. E. Hueschen, D. C. Kaulitz, General Electric Company, U.S. Atomic Energy Commission, and Hanford Atomic Products Operation (page images at HathiTrust)
• Thermal ratcheting / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1951), by J. E. Burke, Anna M. Turkalo, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Elastic constants and sound velocities. (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1949), by Henry L. Laquer, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Elastic constants and sound velocities. (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Division, 1949), by Henry L. Laquer and U.S. Atomic Energy Commission (page images at HathiTrust)
• Temperature and stress formulae for cylinders with heat generated in the material / (Oak Ridge, Tenn. : U.S. Atomic Energy Commission, Technical Information Service, 1953), by C. F. Leyse, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• The rolling pressures of uranium sheet and plate / (Los Alamos, N.M. : Los Alamos Scientific Laboratory of the University of California, 1959), by John E. Hockett, R. K. Bates, J. E. Hoehne, U.S. Atomic Energy Commission, and Los Alamos Scientific Laboratory (page images at HathiTrust)
• Tests of large bridge columns / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1918), by John Howell Griffith, J. Glenn Bragg, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Effect of repeated reversals of stress on double-reinforced concrete beams / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1921), by Willis Appleford Slater, Harold Paul Mueller, George Albert Smith, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Load strain-gage test of 150-ton floating crane for the Bureau of Yards and Docks U.S. Navy Department / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 151), by Louis John Larson, Richard Lawrence Templin, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Stresses caused by cold-rolling / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1920), by Henry Marion Howe, Edward Center Groesbeck, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Release of internal stress in brass tubing / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1925), by Robert John Anderson, Everett Gustaf Fahlman, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Development of a method for measurement of internal stress in brass tubing / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1924), by Robert John Anderson, Everett Gustaf Fahlman, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Flow in a low-carbon steel at various temperatures / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1925), by Herbert J. French, William Armistead Tucker, and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Shear tests of reinforced concrete beams / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926), by Willis Appleford Slater and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• A fabric tension meter for use on aircraft / (Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926), by Louis Bryant Tuckerman and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Statical hysteresis in the flexure of bars / ([Washington, D.C. : U.S. Dept. of Commerce, Bureau of Standards : U.S. Govt. Print. Off., 1926]), by Garbis H. Keulegan and United States. National Bureau of Standards. Technologic Papers (page images at HathiTrust)
• Damage to stainless steel fuel in SPERT reactors / ([Idaho Falls, Idaho] : U.S. Atomic Energy Commission, Idaho Operations Office, [1961]), by R. E. Heffner, Phillips Petroleum Company. Atomic Energy Division, and Idaho National Reactor Testing Station (page images at HathiTrust)
• On the strains in curved masonry dams. ([San Francisco, 1889]), by Hubert Vischer and Luther Wagoner (page images at HathiTrust)
• The influence of tensile stress on gaseous permeation in glassy state and complex ceramics / (Berkeley, Ca. : Lawrence Radiation Laboratory, 1963), by Orlin M. Stansfield, Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Radiation Laboratory (page images at HathiTrust)
• Analysis of stress and strain in spherical shells of pyrolytic carbon / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by J. W. Prados, J. L. Scott, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metals and Ceramics Division (page images at HathiTrust)
• Relaxation characteristics of Inconel at elevated temperatures / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1960), by C. R. Kennedy, D. A. Douglas, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Metallurgy Division (page images at HathiTrust)
• Analysis of simply supported grids of perpendicular beams / (Oak Ridge, Tenn. : Oak Ridge National Laboratory, 1964), by F. J. Witt, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Division (page images at HathiTrust)
• Tension and compression tests of pure bismuth / (Oak Ridge, Tenn. : Atomic Energy Commission, 1946), by A. U. Seybolt, U.S. Atomic Energy Commission, and Los Alamos National Laboratory (page images at HathiTrust)
• A general method of analysis of primary creep data : (including analysis of uranium creep data) / (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by K. R. Merckx, U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• The dependence of thermal stresses in cylindrical reactor fuel elements upon the method of cooling / (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by K. R. Merckx, U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• The effects of low neutron exposures at low temperatures on the hardness and tensile properties of natural uranium / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by A. L. Bement, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Neutron irradiation effects on the tensile properties of Zircaloy-2 / (Richland, Wash. : U.S. Atomic Energy Commission, 1957), by R. S. Kemper, D. L. Zimmerman, U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Mechanical property and formability studies on unalloyed plutonium / (Richland, Wash. : U.S. Atomic Energy Commission, 1959), by H. R. Gardner, I. B. Mann, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, and Hanford Atomic Products Operation. Reactor and Fuels Research and Development Operation (page images at HathiTrust)
• Stresses produced in remote studs by impact and slowly applied tightening torque / (Richland, Wash. : U.S. Atomic Energy Commission, 1958), by K. L. Pell, N. H. Shoup, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., U.S. Atomic Energy Commission. AEC research and development report, United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Hanford Works, Hanford Atomic Products Operation, and Washington State University. Washington State Institute of Technology. Division of Industrial Research (page images at HathiTrust)
• Some mechanical properties of uranium-10 wt% molybdenum alloy under dynamic tension loads / (Livermore, Ca. : Lawrence Radiation Laboratory, 1965), by K. G. Hoge, United States. National Bureau of Standards. UC., United States. Department of Energy. Office of Fusion Energy. UC., United States. National Bureau of Standards. Fracture and Deformation Division. UC., United States. Energy Research and Development Administration. TID., U.S. Atomic Energy Commission. TID., Berkeley. Lawrence Radiation Laboratory University of California, and Lawrence Radiation Laboratory (page images at HathiTrust)
• The dynamics of particles and of rigid elastic, and fluid bodies : being lectures on mathematical physics. (New York : G. E. Stechert, 1922), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• Experimental investigation of creep bending and buckling of thin circular cylindrical shells / (Washington, D.C. : National Advisory Committee for Aeronautics, 1957), by Burton Erickson and United States. National Advisory Committee for Aeronautics (page images at HathiTrust; US access only)
• Trusses and arches analyzed and discussed by graphical methods / (New York : J. Wiley, 1898-), by Charles E. Greene (page images at HathiTrust; US access only)
• Distribution of stress in the Westvaco Trona Mine, Westvaco, Wyo. / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1965]), by Thomas A. Morgan, William J. Sturgis, and William G. Fischer (page images at HathiTrust)
• A method for the prediction of stresses in an isotropic inclusion or orebody of irregular shape / ([Washington, D.C.] : U.S. Dept. of Interior, Bureau of Mines, 1972), by Martin S. Oudenhoven, Wilson Blake, Clarence O. Babcock, and United States Bureau of Mines (page images at HathiTrust)
• Stresses induced around mine development workings by undercutting and caving, climax molybdenum mine, Colorado (in two parts). ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by Robert L. Bolmer and United States Bureau of Mines (page images at HathiTrust)
• Stresses induced around mine development workings by undercutting and caving, Climax Molybdenum Mine, Colorado (in two parts). ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1965), by Stephen Utter, Willard John Tesch, and United States Bureau of Mines (page images at HathiTrust)
• Triaxial method for determining the elastic constants of stress relief cores / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Leonard Adams Obert (page images at HathiTrust)
• Investigation of in situ rock stresses, Ruth Mining District, Nevada with emphasis on slope design problems in open-pit mines / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by S. Jackson Hubbard, Donald O. Rausch, Robert H. Merrill, and David W. Wisecraver (page images at HathiTrust)
• Development of a rock stress monitoring station based on the flat slot method of measuring existing rock stress / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Louis Anthony Panek and John A. Stock (page images at HathiTrust)
• A method of determining dynamic tensile strength of rock at minimum loading / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by L. O. Bacon, Michigan College of Mining and Technology. Institute of Mineral Research, and United States Bureau of Mines (page images at HathiTrust)
• Effects of stress relief and other changes in stress on the physical properties of rock / (Washington, D.C. : U.S. Dept. of the Interior, Bureau of Mines, 1962), by Leonard Obert (page images at HathiTrust)
• Determination of principal stress directions through an analysis of rock joint and fracture orientations, Star Mine, Burke, Idaho / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1964), by Elbridge W. Gresseth (page images at HathiTrust)
• Nonuniform radial loads applied to the boundary of a circular hole in an infinite plate / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, 1967), by Wilbur I. Duvall and Wilson Blake (page images at HathiTrust)
• Stresses and displacements surrounding an open pit in a gravity-loaded rock / ([Washington, D.C.] : U.S. Dept. of the Interior, Bureau of Mines, [1967]), by Wilson Blake and United States Bureau of Mines (page images at HathiTrust)
• Structural design in theory and practice. (London [etc.] Constable & company ltd., 1923), by Henry Adams (page images at HathiTrust)
• Analysis of nonhomogeneous polar-orthotropic circular disks of varying thickness. (Columbus, Engineering Experiment Station, College of Engineering, Ohio State University, 1962), by Charles Wesley Bert (page images at HathiTrust; US access only)
• Fundamentals of aircraft structures. (New York, Prentice-Hall, 1948), by Millard V. Barton (page images at HathiTrust)
• Analysis of continuous skewed slab bridge structures; first annual progress report. Project EES-170. (Columbus, Ohio, Engineering Experiment Station, Ohio State University, 1961), by Asim Yeginobali and Richard W. Bletzacker (page images at HathiTrust; US access only)
• Elementary aircraft structures, ([Ann Arbor, Mich., Lithoprinted by Edwards brothers, inc.], 1943), by Millard V. Barton (page images at HathiTrust)
• The engineering application of the absolute rate theory to plastics: I. Laminates, (Salt Lake City, 1951), by Mervin B. Hogan (page images at HathiTrust; US access only)
• Manual of moment design, (Topeka, Kan., H. M. Ives & sons, 1941), by Jack Singleton and American Institute of Steel Construction (page images at HathiTrust)
• The fracture of metals / (New York : American Welding Society, c1947), by Maxwell Gensamer and United States. Navy Dept. Bureau of Ships (page images at HathiTrust)
• Rahmenformeln; gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus eisen- oder eisenbetonkonstruktion nebst anhang mit sonderfällen teilweise und ganz eingespannter sowie durchlaufender träger, (Berlin, W. Ernst & sohn, 1923), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• Zweigelenkrahmen aus Eisenbeton mit Berücksichtigung des veränderlichen Trägheitsmoments. (Berlin : Ernst, 1920), by Hans Kuball (page images at HathiTrust; US access only)
• Kinetic effects of crowds, ([New York, 1913]), by Charles Joseph Tilden (page images at HathiTrust)
• Loads on pipe in wide ditches, (Ames, Ia., Iowa State College, 1932), by W. J. Schlick (page images at HathiTrust; US access only)
• A text-book on roofs and bridges / (New York : J. Wiley, 1891-1907), by Mansfield Merriman and Henry Sylvester Jacoby (page images at HathiTrust)
• Time-dependent behavior of noncomposite and composite post-tensioned concrete girder bridges / (Urbana : University of Illinois at Urbana-Champaign, 1976), by A. I Fadl, W. L. Gamble, and Illinois. Department of Transportation (page images at HathiTrust; US access only)
• The theory of strains in girders and similar stuctures with observations on the application of theory to practice and tables of the strength and other properties of materials. (London, Longmans, Green, and co., 1869), by Bindon B. Stoney (page images at HathiTrust)
• Die berechnung der rahmenträger, mit besonderer rücksicht auf die anwendung, (Berlin, W. Ernst & sohn, 1919), by Fr. Engesser (page images at HathiTrust; US access only)
• Über spannungslinien, mit anwendung auf den eisenbetonbau ... (Stuttgart, Wittwer, 1917), by Alfred Jackson (page images at HathiTrust; US access only)
• Die Methode der Festpunkte zur Berechnung der statisch unbestimmten Konstruktionen mit zahlreichen Beispielen aus der Praxis insbesondere ausgefürten Eisenbetontragwerken / (Berlin : J. Springer, 1923), by Ernst Suter (page images at HathiTrust; US access only)
• ... Stresses in structures and the accompanying deformations, (New York, J. Wiley & sons, inc.; London, Chapman & Hall, limited, 1914), by A. H. Heller (page images at HathiTrust; US access only)
• Stress analysis of pipe penetrations in spherical shells. ([Ithaca, N. Y.], 1959), by David Hugh Fleming-Brown (page images at HathiTrust)
• Introduction to the mathematical theory of the stress and strain of elastic solids / (London : Longmans, Green, 1894), by Benjamin Williamson (page images at HathiTrust)
• Vorlesungen über Statik der Baukonstruktionen und Festigkeitslehre. (Leipzig : Engelmann, 1903-1905), by Georg Mehrtens (page images at HathiTrust; US access only)
• Effect of axial load on mode shapes and frequencies of beams / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Francis J. Shaker and Lewis Research Center (page images at HathiTrust)
• Dynamics of particles, of rigid, elastic, and fluid bodies; being lectures on mathematical physics. (Leipzig, Tuebner, 1904), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• Neure Bauweisen und Bauwerke aus Beton & Eisen. (Berlin : W. Ernst & Sohn, 1902-1904) (page images at HathiTrust)
• Safe building construction : a treatise giving in simplest forms possible practical and theoretical rules and formulae used in construction of buildings and general instruction / (New York : Macmillan Company, 1908), by Louis de Coppet Bergh (page images at HathiTrust)
• Methodology for design and construction of drilled shafts in cohesive soils / (Washington, D.C. : The Office ; [Springfield, Va. : Available from National Technical Information Service, 1984]), by Lawrence D. Johnson and United States Army Corps of Engineers (page images at HathiTrust)
• Stress analysis for ORSORT students / ([Oak Ridge, Tenn. : USAEC Technical Information Service Extension, 1956]), by C. O. Smith and U.S. Atomic Energy Commission (page images at HathiTrust)
• Some observations on loss of static strength due to fatigue cracks / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Walter Illg, Herbert F. Hardrath, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A study of the response of panels to random acoustic excitation / (Washington, D.C. : National Advisory Committee for Aeronautics, 1955), by Robert W. Hess, Harvey H. Hubbard, Leslie W. Lassiter, Langley Aeronautical Laboratory, United States. National Adviosry Committee for Aeronautics. NACA research memorandum, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Some investigations of the general instability of stiffened metal cylinders. 9 - Criterions for the design of stiffened metal cylinders subject to general instability failures / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1947), by Louis G. Dunn and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by A. W. Dana, G. Sachs, E. L. Aul, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Tension properties of aluminum alloys in the presence of stress-raisers. (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by E. L. Aul, G. Sachs, A. W. Dana, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Elevated-temperature compressive stress-strain data for 24S-T3 aluminum-alloy sheet and comparisons with extruded 75S-T6 aluminum alloy / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by William M. Roberts and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Mechanisms of failure of high nickel-alloy turbojet combustion liners / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by John W. Weeton and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Direct method of design and stress analysis of rotating disks with temperature gradient / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by S. S. Manson and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stresses in and general instability of monocoque cylinders with cutouts. 7- Experimental investigation of cylinders having either long bottom cutouts or series of side cutouts / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by Nicholas J. Hoff, Joseph J. Mele, Bruno A. Boley, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Critical stress of ring-stiffened cylinders in torsion / (Washington, D.C. : National Advisory Committee for Aeronautics, 1949), by Manuel Stein, Harold Crate, J. Lyell Sanders, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Compressive strength of flanges / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Elbridge Z. Stowell and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Buckling of thin-walled cylinder under axial compression and internal pressure / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Hsu Lo, Edward B. Schwartz, Harold Crate, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A recurrence matrix solution for the dynamic response of aircraft in gusts / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by John C. Houbolt and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Analysis of plane-stress problems with axial symmetry in strain-hardening range / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by M. H. Lee Wu and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The effect of nonuniform temperature distributions on the stresses and distortions of stiffened-shell structures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1950), by Richard R. Heldenfels and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A structural-efficiency evaluation of titanium at normal and elevated temperatures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by George J. Heimerl, Paul F. Barrett, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Lateral elastic instability of hat-section stringers under compressive load / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by Stanley Goodman and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• A method of calculating stresses in torsion-box covers with cutouts / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by Richard Rosecrans and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Creep of lead at various temperatures / (Washington, D.C. : National Advisory Committee for Aeronautics, 1951), by Peter W. Neurath, J. S. Koehler, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Deflection and stress analysis of thin solid wings of arbitrary plan form with particular reference to delta wings / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Manuel Stein, John M. Hedgepath, J. Edward Anderson, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Theory and procedure for determining loads and motions in chine-immersed hydrodynamic impacts of prismatic bodies / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Emanuel Schnitzer, N. Grossman, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Calibration of strain-gage installations in aircraft structures for the measurement of flight loads / (Washington, D.C. : National Advisory Committee for Aeronautics, 1953), by T. H. Skopinski, Wilber B. Huston, William S. Aiken, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Stress distributions caused by three types of loading on a circular semimonocoque cylinder with flexible wings / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Harvey G. McComb and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• The stress-strain characteristics of uranium / (Oak Ridge, Tenn. : United States Atomic Energy Commission, Technical Information Service, 1955), by David A. McCutchan, Glenn Murphy, Ames Laboratory, and U.S. Atomic Energy Commission. Technical Information Service (page images at HathiTrust)
• Introduction to electrical-circuit analogies for beam analysis / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Stanley U. Benscoter, Richard H. MacNeal, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Experimental and theoretical determination of thermal stresses in a flat plate / (Washington, D.C. : National Advisory Committee for Aeronautics, 1952), by Richard R. Heldenfels, William M. Roberts, Langley Aeronautical Laboratory, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Residual stresses in natural uranium fuel / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1961]), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Heavy water components test reactor : Savannah River Plant : stress analysis of the reactor vessel / (Aiken, S. C. : E.I. du Pont de Nemours & Co., Savannah River Laboratory, [1961]), by H. W. Bellas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Repair of heat exchangers damaged by stress corrosion : Savannah River Plant / (Aiken, S. C. : E.I. du Pont de Nemours & Co., Savannah River Laboratory, 1962), by H. W. Bellas, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Stress relaxation in stainless steel during irradiation / (Aiken, S.C. : E.I. du Pont de Nemours & Co., Explosives Dept., Atomic Energy Division, Technical Division, Savannah River Laboratory, [1959]), by J. Walter Joseph, U.S. Atomic Energy Commission, Savannah River Laboratory, and E.I. du Pont de Nemours & Company (page images at HathiTrust)
• Vertical and drag ground-reaction forces developed in landing impacts of a large airplane / (Washington, D.C. : National Advisory Committee for Aeronautics, [1955]), by Richard H. Sawyer, James M. McKay, Albert W. Hall, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• An experimental study of arching in sand / (Vicksburg, Miss. : Waterways Experiment Station, 1965), by James W. McNulty, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of horizontally oriented buried cylinders to static and dynamic loading / (Vicksburg, Miss. : Waterways Experiment Station, 1965), by Albert F. Dorris (page images at HathiTrust)
• Development of a microcracking technique for measuring in situ stress and strain : report 1 : laboratory tests / (Vicksburg, Miss. : Waterways Experiment Station, 1967), by Richard L. Stowe, U.S. Army Engineer Waterways Experiment Station, and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Development of a microcracking technique for measuring in situ stress and strain : report 2 : field tests / (Vicksburg, Miss. : Waterways Experiment Station, 1967), by Richard L. Stowe, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Old River low-sill control structure : (Vicksburg, Miss. : Waterways Experiment Station, 1956), by Waterways Experiment Station (U.S.) (page images at HathiTrust)
• Prototype hawser-force measurements, Jackson Lock, Tombigbee River, Alabama / (Vicksburg, Miss. : Waterways Experiment Station, 1965), by J. V. Dawsey, W. C. Blanton, C. J. Huval, Waterways Experiment Station (U.S.), and United States. Army. Corps of Engineers. Mobile District (page images at HathiTrust)
• Measuring soil properties in vehicle mobility research : report 2 : an evaluation of the rectangular hyperbola for describing the load-deformation response of soils / (Vicksburg, Miss. : Waterways Experiment Station, 1965), by N. R. Murphy, Waterways Experiment Station (U.S.), and United States. Army Materiel Command (page images at HathiTrust)
• Evaluation of sample disturbance on soils using the concept of "reference strain" / (Vicksburg, Mississippi : U.S. Army Engineer Waterways Experiment Station, Geotechnical Laboratory, 1979), by Vincent P. Drnevich, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Foundation investigations, NASA Mississippi Test Facility : report 2 : static load testing of foundation piles at test stand S-II, AI / (Vicksburg, Miss. : Waterways Experiment Station, 1970), by John B. Stevens, Robert G. Guernsey, and Jack Fowler (page images at HathiTrust)
• Stresses in rings deformed out of their planes / (Cincinnati, Ohio : Atomic Products Division, 1958), by Bernard W. Shaffer, Eric E. Ungar, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• Some simplified solutions for relatively stiff beams on elastic foundations / (Cincinnati, Ohio : Atomic Products Division, 1958), by Bernard W. Shaffer, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• Stress resultants and out-of-plane deformations in stiff rings attached to elastic cylinders and subject to concentrated loads / (Cincinnati, Ohio : Atomic Products Division, 1958), by Bernard W. Shaffer, Eric E. Ungar, General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Structural analysis of the ANP concentric ring fuel element / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation, 1961), by D. R. Riley, General Electric Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Join computer program / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation., 1961), by John Wallach, U.S. Atomic Energy Commission, and General Electric Company. Aircraft Nuclear Propulsion Department. Atomic Products Division (page images at HathiTrust)
• The elastic-plastic stresses within a tube generating internal heat uniformly / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation., 1961), by Bernard W. Shaffer, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Stresses in hexagonal tubes / (Cincinnati, Ohio : General Electric, Nuclear Materials and Propulsion Operation., 1961), by H. J. Kurtz, F. E. Wells, U.S. Atomic Energy Commission, and General Electric Company (page images at HathiTrust)
• Internal pressure stress-rupture tests of small-diameter tubing / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1956), by E. E. Baldwin, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Calculation of stress and strain from triaxial test data on undrained soil specimens / (Vicksburg, Miss. : Waterways Experiment Station, 1971), by J. Q. Ehrgott, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Effect of loading rate on the stress-strain characteristics of a clay shale in unconsolidated-undrained triaxial compression / (Vicksburg, Miss. : Waterways Experiment Station, 1973), by Randy A. Knott, Waterways Experiment Station (U.S.). Soils and Pavements Laboratory, and United States. Defense Nuclear Agency (page images at HathiTrust)
• Effects of axial restraint on length change of expanding mortar bars / (Vicksburg, Miss. : Waterways Experiment Station, 1969), by Billy J. Houston (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 4 : Mine Shaft Series, Mine Under Event, Program 3, structural response, deep-slab tests / (Vicksburg, Miss. : Waterways Experiment Station, 1969), by Gayle E. Albritton, David M. Bayer, Jimmy Piroshaw Balsara, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading. (Vicksburg, Miss. : Waterways Experiment Station, 1970), by James E. Beavers, Gayle E. Albritton, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 6 : Mine Shaft Series, Mineral Rock Event, Program 3, structural response studies, deep-slab tests, Phase 2 / (Vicksburg, Miss. : Waterways Experiment Station, 1970), by James M. Watt, Gayle E. Albritton, Jimmy Piroshaw Balsara, Waterways Experiment Station (U.S.), and United States. Defense Atomic Support Agency (page images at HathiTrust)
• Subscale static tests, closure analysis and test program : report 1 : data report for first-phase tests / (Vicksburg, Miss. : Waterways Experiment Station, 1970), by James M. Watt (page images at HathiTrust)
• Subscale static tests, closure analysis and test program : report 2 : data report for second-phase tests / (Vicksburg, Miss. : Waterways Experiment Station, 1970), by James M. Watt (page images at HathiTrust)
• Investigation of K₀ testing in cohesionless soils : final report / (Vicksburg, Miss. : Waterways Experiment Station, 1975), by Mosaid M. Al-Hussaini and Frank C. Townsend (page images at HathiTrust)
• Effect of shear stress on dynamic bulk modulus of sand / (Vicksburg, Miss. : The Station, [1978]), by John H. Schmertmann, University of Florida. Department of Civil Engineering, Geotechnical Laboratory (U.S.), and United States Army Corps of Engineers (page images at HathiTrust)
• Analysis of framed structures, (New York and London, McGraw-Hill Book Company, 1935), by John Horace Matthews and Phillip Ervin Soneson (page images at HathiTrust; US access only)
• Stresses in simple structures, (New York, London, McGraw-Hill Book Company, inc., 1932), by Leonard Church Urquhart and Charles Edward O'Rourke (page images at HathiTrust; US access only)
• Prediction of dimensional changes in uranium fuel elements during irradiation : the elastic solution : interim report /, by Peter R. Morris, Richard N. Thudium, U.S. Atomic Energy Commission, and National Lead Company of Ohio. Feed Materials Production Center (page images at HathiTrust)
• Stress analysis of a pressure-vessel head with square holes / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1962), by Lorenzo Deagle, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• Effect of hydrogen on the strain fatigue properties of zircaloy-2 weld metal / (Schenectady, N.Y. : Knolls Atomic Power Laboratory, General Electric Company, 1962), by S. Beitscher, U.S. Atomic Energy Commission, General Electric Company, and Knolls Atomic Power Laboratory (page images at HathiTrust)
• A computer program for lock culvert frame analysis / (Vicksburg, Miss. : Waterways Experiment Station, 1973), by Paul K. Senter, Fred T. Tracy, Waterways Experiment Station (U.S.). Automatic Data Processing Center, and United States. Army. Corps of Engineers. Lower Mississippi Valley Division (page images at HathiTrust)
• Model test for stresses and deflections in the N.S. Savannah reactor vessel model and attachments /, by R. E. Vining, U.S. Atomic Energy Commission. New York Operations Office, and Pa.). Laboratories for Research and Development Franklin Institute (Philadelphia (page images at HathiTrust)
• Stress-strain-temperature-time relationships for refractory materials / (Canoga Park, California : Atomics International, [1958]), by R. D. Chipman, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• High-temperature-strain fatigue testing with a modified direct-stress fatigue machine / (Canoga Park, California : Atomics International, [1959]), by W. F. Anderson, C. R. Waldron, North American Aviation. Atomics International Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Strain-gage study of internally cooled exhaust valves having various throat designs / (Washington D.C. : National Advisory Committee for Aeronautics ;, 1946), by Arthur G. Holms, Richard D. Faldetta, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Flexural characteristics of radially loaded cylindrical shells with stiffening rings / ([Albuquerque, N.M.] : Sandia Corporation ; Washington, D.C. : Available from the Office of Technical Services, Department of Commerce, [1961]), by D. R. Fisher and Sandia Corporation (page images at HathiTrust)
• Stress analysis of circular semimonocoque cylinders with cutouts by a perturbation load technique / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Harvey G. McComb and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• An investigation of the creep lifetime of 75S-T6 aluminum-alloy columns / (Washington, D.C. : National Advisory Committee for Aeronautics, 1954), by Eldon E. Mathauser, William A. Brooks, and United States. National Advisory Committee for Aeronautics (page images at HathiTrust)
• Strain rate effect on the strength of frozen silt / (Hanover, N.H. : U.S. Dept. of Defense, Dept. of the Army, Corps of Engineers, Cold Regions Research and Engineering Laboratory, 1975), by F. Donald Haynes, J. Kalafut, J. A. Karalius, United States. Army. Corps of Engineers. Office of Research and Development, and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• A stress analysis of silo construction / (1915), by Raymond F. Giffels and Bertram Giffels (page images at HathiTrust; US access only)
• The analysis of the Lansing State Savings Bank building / (1918), by Morris A. Harkavy and Russell Vivian Perry (page images at HathiTrust; US access only)
• Investigation of stresses in East Lansing water tower / (1915), by Carl H. Peterson (page images at HathiTrust; US access only)
• An improved transverse shear deformation theory for laminated anisotropic plates / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by M. V. V. Murthy, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials. (New York, D. Van Nostrand, 1873), by Bindon B. Stoney (page images at HathiTrust)
• Über die berechnung statisch ungestimmter auslegerbrücken. (Berlin : Ernst & Sohn, 1898), by Heinrich F. B. Müller-Breslau (page images at HathiTrust; US access only)
• Pilot study for definition of track component load environments / (Washington, D.C. : UMTA ; Springfield, Va. : Available through the National Technical Information Service, 1981), by Thomas R. Stagliano, United States. Urban Mass Transportation Administration. Office of Rail and Construction Technology, and Kaman AviDyne (page images at HathiTrust)
• Stress-intensity factors along three-dimensional elliptical crack fronts / (Washington, D.C.: Federal Aviation Administration, Office of Aviation Research ; Springfield, Va. : Available through the National Technical Information Service, [1998]), by M. Gosz, B. Moran, Ill.). Center for Quality Engineering and Failure Prevention Northwestern University (Evanston, Ill.). Department of Civil Engineering Northwestern University (Evanston, University of New Hampshire. Dept. of Mechanical Engineering, and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
• Design of piping systems; expansion stresses and reactions in piping systems. (Jersey City, N.J., New York, N.Y., The M.W. Kellog Company, [c1941]), by M.W. Kellogg Company (page images at HathiTrust; US access only)
• Formulas and tables for architects and engineers in calculating the strains and capacity of structures in iron and wood, (Washington City, W. Choate & Co., 1873), by Franz Schumann (page images at HathiTrust)
• Stresses about mine openings in a homogeneous rock body. (New York, 1951), by Louis Anthony Panek (page images at HathiTrust; US access only)
• Tensile elastic properties of 18:8 chromium-nickel steel as affected by plastic deformation / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by Dunlap J. McAdam, R. W. Mebs, and United States. National Bureau of Standards (page images at HathiTrust)
• Effect of service stresses on impact resistance, X-ray diffraction patterns, and microstructures of 25S aluminum alloy / (Washington, D.C. : National Advisory Committee for Aeronautics, 1939), by J. A. Kies, G. Willard Quick, and United States. National Bureau of Standards (page images at HathiTrust)
• Analysis of deformations of viscoelastic bodies due to gravitational forces. (Lafayette, Ind., School of Aeronautical Engineering, Purdue University, [1960]), by George Lianis (page images at HathiTrust)
• Tests of eccentrically loaded columns. (Los Angeles, Dept. of Engineering, University of California, 1954), by R. D. Chipman (page images at HathiTrust)
• Buckling of uniformly compressed steel plates in the strain-hardening range. (Bethlehem, Pa., Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by Geerhard Haaijer (page images at HathiTrust)
• Energy versus stress theories for combined stress; a fatigue experiment using a rotating disc, ([Providence] Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1958), by William N. Findley (page images at HathiTrust)
• Fundamental study of creep-rupture under combined stress /, by G. H. Rowe, J. R. Stewart, U.S. Atomic Energy Commission, and United Aircraft Corporation. Pratt & Whitney Aircraft Division (page images at HathiTrust)
• Partially plastic thick-walled cylinders. A portion of a research project entitled plastic behavior of engineering materials. (Urbana, Dept. of Theoretical and Applied Mechanics, University of Illinois., 1952), by Montogomerie Christie Steele (page images at HathiTrust)
• On the stability of elastic equilibrium (Washington, National Aeronautics and Space Administration, 1967), by W. T. Koiter and W. T. Koiter (page images at HathiTrust)
• Piping stress calculations simplified. (Lake Success, N.Y. : S.W. Spielvogel, 1961), by Siegfried Werner Spielvogel (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design. (Lafayette, Ind., The author; distributed by the Cornell Co-op Society, Ithaca, N. Y., 1939), by Karl Dawson Wood (page images at HathiTrust)
• Analysis of underground openings in rock by finite element methods : final report / ([Syracuse, N.Y.] : Dept. of Civil Engineering, Syracuse University : distributed by National Technical Information Service, U. S. Dept. of Commerce, 1973), by Fred H. Kulhawy, United States Bureau of Mines, and United States. Advanced Research Projects Agency (page images at HathiTrust)
• A theory of the non-linear influence of normal stress on fatigue under combined stresses, ([Providence] Engineering Materials Research Laboratory, Division of Engineering, Brown University, 1956), by J. J. Coleman and William Nichols Findley (page images at HathiTrust)
• Theory of statically indeterminate structures / (New York : McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
• Working stresses for structural design. ([Washington, Govt. Print. Off.], 1958), by United States Army Corps of Engineers (page images at HathiTrust)
• Modified theories of fatigue failure under combined stress, (Urbana, 1954]), by William N. Findley and P. N. Mathur (page images at HathiTrust)
• Discontinuity stresses in metallic pressure vessels. (Washington] National Aeronautics and Space Administration; [for sale by the National Technical Information Service, Springfield, Va.], 1971), by F. L. Rish, L. Kovalevsky, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Axial tension and bending interaction curves for members loaded inelastically, (Urbana, Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Don Orr Brush (page images at HathiTrust)
• Propagations of waves in solid media. (Ithaca, N.Y., [1951-53]), by Cornell University. School of Mechanical Engineering. Dept. of Engineering Mechanics and Materials (page images at HathiTrust)
• The experimental stress analysis of the Firestone type R-5⁰, 20 x 75 truck rim. (Ithaca, N. Y., Machine Design Laboratory, Sibley School of Mechanical Engineering, Cornell University, 1952-55), by Richard M. Phelan (page images at HathiTrust)
• Influence coefficients for toroidal shells. Uniform internal pressure acting on the convex surface. ([Emeryville, Calif., Shell Development Co., 1958]), by G. D. Galletly (page images at HathiTrust)
• Finite elastic analysis of an infinite plate with an elliptic hole. (Lafayette, Ind., School of Aeronautical and Engineering Sciences, Purdue University, [1961-), by George Lianis (page images at HathiTrust)
• The experimental analysis of dams / (Denver, Colo. : U.S. Dept. of the Interior, Bureau of Reclamation, 1934), by J. L. Savage and United States. Bureau of Reclamation (page images at HathiTrust)
• The strength of shell bodies - theory and practice / (Washington, D.C. : National Advisory Commitee for Aeronautics, [1937]), by H. Ebner and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• Rectangular shell plating under uniformly distributed hydrostatic pressure / (Washington, D.C. : National Advisory Commitee for Aeronautics, [1940]), by M. Neubert, A. Sommer, and United States. National Advisory Commitee for Aeronautics (page images at HathiTrust)
• A rapid technique for predicting the general instability of ship grillages with elastically constrained edges / (Bethesda, Md : Naval Ship Research and Development Center, Naval Sea Systems Command, 1975), by John C. Adamchak, United States. Naval Sea Systems Command, and Naval Ship Research and Development Center (page images at HathiTrust)
• On the stability of stiffened plates / (Washington, D.C. : U.S. Experimental Model Basin, Navy Yard, 1935), by Stephen Timoshenko, Dwight F. Windenburg, M.C. Roemer, and U.S. Experimental Model Basin (page images at HathiTrust)
• Airplane design; a textbook of airplane layout and stress analysis calculations with examples and problems. (Ithaca, N. Y., College of engineering, Cornell university, 1935), by Karl Dawson Wood (page images at HathiTrust)
• Report on the exploratory series of tests on longitudinal distribution of stresses in reinforcing bars. A cooperative project between the American Iron and Steel Institute and Cornell University. (Ithaca, N.Y., 1948), by Cornell University. School of Civil Engineering and American Iron and Steel Institute (page images at HathiTrust)
• Combined effects of axial load, thermal stress, and creep in flat plates (Wright-Patterson Air Force Base, Ohio, Wright Air Development Center, Air Research and Development Command, U. S. Air Force, 1958), by P. C. Huang and C. J. Van Der Maas (page images at HathiTrust)
• Stresses in simple framed structures : a text book to accompany exercises in the computation of the axial stresses in the members of load-bearing frames / (Lafayette, Ind. : Printed by the Burt-Haywood company, 1911), by Albert Smith (page images at HathiTrust; US access only)
• Statically indeterminate frameworks. (Chapel Hill [N.C.] University of North Carolina Press, 1937), by Thomas Felix Hickerson (page images at HathiTrust)
• Analysis of continous frames by graphical distribution of moments, ([Oakland, Calif., Tooley-Towne corporation], c1943), by Anatol Alexander Eremin (page images at HathiTrust)
• Statische untersuchung der aus ebenen tragflächen zusammengesetzten räumlichen tragwerke. (Zürich, Druck von gebr. Leemann & co., 1920), by Hermann Schwyzer (page images at HathiTrust; US access only)
• Development of procedures for rapid computation of dynamic structural response / (Urbana, Ill. : University of Illinois, [1958]), by John William Melin and Samuel Sutcliffe (page images at HathiTrust)
• The failure of plain and spirally reinforced concrete in compression / (Urbana, Ill. : Engineering Experiment Station, University of Illinois, [1929]), by Frank E. Richart, Rex Lenoi Brown, and Anton Brandtzæg (page images at HathiTrust)
• Solutions for certain rectangular slabs continuous over flexible supports : a report of an investigation conducted by the Engineering Experiment Station, University of Illinois in cooperation with the United States Bureau of Public Roads and the Illinois Division of Highways / (Urbana, Ill. : University of Illinois, Engineering Experiment Station, [1938]), by Vernon Peter Jensen, Illinois. Division of Highways, United States. Bureau of Public Roads, and University of Illinois. Engineering Experiment Station (page images at HathiTrust)
• Field investigation of prestressed reinforced concrete highway bridges : instrumentation for long-term field investigations / (Urbana, Ill. : University of Illinois, [1967]), by Robert James Reynolds, W. L. Gamble, and University of Illinois at Urbana-Champaign. Dept. of Civil Engineering (page images at HathiTrust)
• The strength of structural elements; a textbook for students, engineers and architects, (London, Scott, Greenwood, 1917), by Ernest H. Sprague (page images at HathiTrust)
• Statische tabellen, belastungsangaben und formeln zur aufstellung von berechnungen für baukonstruktionen, gesammelt und berechnet (Berlin, W. Ernst & Sohn, 1912), by Franz Boerner (page images at HathiTrust; US access only)
• Stresses in masonry, (London, C. Griffin & company, limited, 1909), by Herbert Chatley (page images at HathiTrust; US access only)
• A practical treatise on the strength of materials: including their elasticity and resistance to impact. (London, New York, E. & F.N. Spon, 1902), by Thomas Box (page images at HathiTrust; US access only)
• Bestemmelse of spændinger i plader ved anvendelse af differensligninger, (København, I kommission hos G.E.C. Gad, 1920), by Niels Jørgen Nielsen (page images at HathiTrust; US access only)
• Working stresses. (New Brunswick [N.J.] Rutgers University Press, 1940), by Joseph Marin (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges, (New York, D. Van Nostrand Co., 1915), by Isamu Hiroi (page images at HathiTrust)
• Die Berechnung von Steifrahmen nebst anderen statisch unbestimmten Systemen. (Berlin, Julius Springer, 1909), by Ejnar Björnstad (page images at HathiTrust; US access only)
• Practical wind bracing; a book containing easy and rapid methods of figuring wind stresses in high buildings, (Buffalo, N.Y., 1930), by Harry Ellsworth Schneider (page images at HathiTrust)
• Structural problems, part II, ([Toronto] Engineering Society of the University of Toronto, 1921), by Clarence Richard Young (page images at HathiTrust)
• A text-book on the mechanics of materials : and of beams, columns, and shafts / (New York : Wiley, 1894 [c1890]), by Mansfield Merriman (page images at HathiTrust)
• Arch dam investigation. v. 1-3. ([New York, 1928-34]), by Engineering Foundation (U.S.) Committee on Arch Dam Investigation and American Society of Civil Engineers (page images at HathiTrust)
• Strength of materials; a first course, (New York, Ronald Press, [c1938]), by Norman C. Riggs and Max Mark Frocht (page images at HathiTrust)
• Résistance des matériaux, (Paris, L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• Structural mechanics, (New York, McGraw-Hill, 1932), by Harrison W. Hayward, Ralph G. Adams, Addison Francis Holmes, and Lowell Institute School for Industrial Foremen (page images at HathiTrust)
• Framed structures and girders, theory and practice ... (New York, London, McGraw-Hill Book Company, 1911-), by Edgar Marburg (page images at HathiTrust; US access only)
• Graphics and structural design, (New York, John Wiley & sons, inc.; [etc., etc.], 1915), by Howard Drysdale Hess (page images at HathiTrust; US access only)
• Elastic stresses in structures. (London, Scott, Greenwood, 1919), by Alberto Castigliano and Ewart S. Andrews (page images at HathiTrust; US access only)
• Theory of transverse strains and its application in the construction of buildings : including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... / (New York : J. Wiley & sons, 1889), by R. G. Hatfield (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute, (New York, Wiley, 1890), by William H. Burr (page images at HathiTrust)
• Dynamic behavior of cylindrical shells under initial stress, (New York, Columbia University, Dept. of Civil Engineering and Engineering Mechanics, Institute of Flight Structures, 1960), by George Herrmann and A. E. Armenakas (page images at HathiTrust)
• Airplane stress analysis. (San Diego, Calif., Ryan aeronautical institute, 1942), by San Diego Ryan Aeronautical Institute (page images at HathiTrust; US access only)
• Piping stress calculations simplified / (New York ; London : McGraw-Hill, 1943), by Siegfried Werner Spielvogel (page images at HathiTrust; US access only)
• Fatigue failure under combinations of stresses / (Urbana, Ill. : Dept. of Theoretical and Applied Mechanics, University of Illinois, 1954), by William N. Findley, D. E. Martin, Prem Narain Mathur, and University of Illinois at Urbana-Champaign. Dept. of Theoretical and Applied Mechanics (page images at HathiTrust; US access only)
• A course in modern timber engineering, (New Orleans, Southern pine association, [1942]), by Howard James Hansen and Southern Pine Association (page images at HathiTrust)
• The traverse method in stress analysis. ([Los Angeles, c1948]), by Ralph William Stewart (page images at HathiTrust)
• Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgewise bending and compression / (1956), by William R. Kimel (page images at HathiTrust; US access only)
• A method of determining dynamic tensile strenth of rock at minimum loading / ([Washington] : U.S. Dept. of Interior, Bureau of Mines, [1962]), by L. O. Bacon, Michigan College of Mining and Technology. Institute of Minerals Research, and United States Bureau of Mines (page images at HathiTrust; US access only)
• Distribution of wheel loads on timber bridges, ([Washington, U.S. Dept. of Commerce, National Bureau of Standards, Institute for Applied Technology; Distributed by: Clearinghouse for Federal Scientific and Technical Information, 1968]), by E. C. O. Erickson and K.M. Romstad (page images at HathiTrust; US access only)
• Finite element techniques for orthotropic plane stress and orthotropic plate analysis (Madison, Wis., U.S. Dept. of Agriculture, Forest Products Laboratory, 1968), by A. Carl Maki (page images at HathiTrust; US access only)
• Progress report on slip of structural steel double-lap joints assembled with high-strength bolts. 1st- (Seattle, 1951-), by University of Washington. Engineering Experiment Station and Research Council on Riveted and Bolted Structural Joints (page images at HathiTrust)
• Local plastic stresses in sheet aluminum-alloy specimens with stress-concentration factor of 2 under constant-amplitude loading / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va. 22151], 1965), by John H. Crews, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Tensile testing of soils; a literature review, (Vicksburg, Miss., U.S. Army Engineer Waterways Experiment Station, 1973), by Mosaid M. Al-Hussaini and Frank C. Townsend (page images at HathiTrust; US access only)
• An experimental study of the interaction of strain fields between coldworked fastener holes / (1980), by Mark T. Tipton (page images at HathiTrust; US access only)
• Crack propagation : selected references. (Oklahoma City : Federal Aviation Agency, Aeronautical Center, 1965), by United States. Federal Aviation Agency. Administrative Services Division. Library Branch (page images at HathiTrust)
• Structural analysis. (Scranton, International Textbook Co., [1960]), by Jack C. McCormac (page images at HathiTrust)
• Structural deflections; a literature and state-of-the-art survey (Washington] U.S. National Bureau of Standards; [for sale by the Supt. of Docs., U.S. Govt. Print. Off.], 1973), by T. V. Galambos (page images at HathiTrust)
• Continuity in concrete building frames. (Chicago : Portland Cement Association, [1951]), by Chicago Portland Cement Association (page images at HathiTrust; US access only)
• Introduction to plasticity. (New York, Ronald Press Co., [1956]), by A. Phillips (page images at HathiTrust)
• The influence of temperature and rate of strain on the properties of metals in torsion / (Urbana : University of Illinois, 1953), by Clyde E. Work and Thomas J. Dolan (page images at HathiTrust; US access only)
• Strength and stiffness of large-gap metal-plate wood connections / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, [1994]), by Forest Products Laboratory (U.S.) (page images at HathiTrust; US access only)
• Predicting performance of hardboard in I-beams / (Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1972), by Terry J. Ramaker and Michael D. Davister (page images at HathiTrust; US access only)
• Propagation of an arbitrarily oriented rectilinear crack during extension of a plate / (Washington : National Aeronautics and Space Administration : For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, VA, 1965), by V. V. Panasi︠u︡k, S. Ye Kovchik, and L. T. Berezhnitskiy (page images at HathiTrust; US access only)
• Stress concentration about curvilinear holes in physically nonlinear elastic plates / (Washington : National Aeronautics and Space Administration : For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, VA, 1966), by Aleksandr Nikolaevich Guzʹ, I. A. Tsurpal, and Guriĭ Nikolaevich Savin (page images at HathiTrust; US access only)
• Lamination residual stresses in multilayered fiber composites / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by C. C. Chamis, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Beggs deformeter stress analysis of single barrel conduits, (Washington] U.S. Dept. of the Interior, Bureau of Reclamation; [for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1968]), by H. Boyd Phillips and Ira E. Allen (page images at HathiTrust; US access only)
• Photoelastic and experimental analog procedures / (Denver, Colo. : Technical Information Branch, Denver Federal Center, [1962]), by W. T. Moody, H. Boyd Phillips, and United States. Bureau of Reclamation (page images at HathiTrust; US access only)
• Manual on experimental stress analysis. (Cambridge, Mass., ©1959), by Society for Experimental Stress Analysis and Society for Experimental Stress Analysis. Educational Committee (page images at HathiTrust; US access only)
• Residual stress and the yield strength of steel beams, (Bethlehem, Pa., Lehigh University, Department of Civil Engineering and Mechanics. Fritz Engineering Laboratory, 1951), by Ching Huan Yang and Welding Research Council (U.S.) (page images at HathiTrust)
• SO131 : an IBM-650 code to solve pressure and thermal stress problems in core subassembly plates /, by Carl M. Friedrich, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Stress-strain characteristics and slip band formation in metal crystals /, by Fred D. Rosi, Inc Sylvania Electric Products, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Effects of boundary friction on transmission of static stress through sand in cylindrical tanks /, by Phillip A. Abbott, Air Force Weapons Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Instability phenomena in thin-walled cylinders /, by W. R. Russ, Frederick Forscher, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Crack problems in the mathematical theory of elasticity / (Raleigh, N. C. : North Carolina State College, Departments of Mathematics and Engineering Research, 1961), by Ian Naismith Sneddon (page images at HathiTrust; US access only)
• SN5001 : an IBM-650 code for steady-state thermal evaluation of an instrumented multi-fuel-plate subassembly /, by E. Arbtin, R. B. Westphal, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Stress and strength of manufactured parts, (New York, McGraw-Hill, 1950), by Charles Lipson (page images at HathiTrust)
• Seal-shell-2 : a computer program for the stress analysis of a thick shell of revolution with axisymmetric pressures, temperatures, and distributed loads /, by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Structure design notes : calculation of stresses, forces, and deflections in linear-elastic skeleton structures with temperature, pressures, applied loads and redundant loads /, by C. M. Friedrich, Bettis Atomic Power Laboratory, Westinghouse Electric Corporation, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Mechanics of materials; a treatise on the elasticity and strength of beams, columns, arches, etc., for students of engineering. (New York, J. Wiley & sons, 1887), by Irving P. Church (page images at HathiTrust)
• Wood structural design data. (Washington, D. C. :, 1956-), by National Lumber Manufacturers Association (page images at HathiTrust)
• Résistance des matériauz appliquée aux constructions. Methodes pratiques par le calcul et la statique graphique ... (Paris, Vve C. Dunod, 1904-1908 [1907]), by Ernest Aragon (page images at HathiTrust; US access only)
• Design, construction and testing of a plywood hyperbolic paraboloid lattice structure, (Lawrence, Kan., University of Kansas, 1958), by Willard Strode, ed. by Donald Lee Dean (page images at HathiTrust)
• Review of previous work on short-time tests for predicting fatigue properties of materials. (Wright-Patterson Air Force Base, Ohio : Wright Air Development Center, Air Research and Development Command, U.S. Air Force, 1953), by Franz H. Vitovec (page images at HathiTrust; US access only)
• Compressive strength of ship hull girders / (Washington : Ship Structure Committee ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by H. Becker, A. Coloa, Sanders Associates, and United States. Naval Sea Systems Command (page images at HathiTrust)
• Gross panel strength under combined loading / (Washington : Ship Structure Committee ; [Springfield, Va. : For sale by the National Technical Information Service], 1977), by A. E. Mansour, United States. Ship Structure Committee, NAVSEC (Organization : U.S.), and inc Mansour Engineering (page images at HathiTrust)
• Examination of service and stress data of three ships for development of hull girder load criteria / (Washington, D.C. : U.S. Coast Guard Headquarters, 1979), by J. F. Dalzell, M. W. Hsu, N. M. Maniar, United States. Ship Structure Committee, NAVSEC (Organization : U.S.), M. Rosenblatt & Son, Stevens Institute of Technology, and United States Coast Guard (page images at HathiTrust)
• Determination of strain rates in ship hull structures : a feasibility study / (Washington, D.C. : Ship Structure Committee, 1984), by Julio G. Giannotti and Karl Stambaugh (page images at HathiTrust)
• Fracture control for fixed offshore structures. ([Washington, D.C.] : Ship Structure Committee ; [Springfield, Va. : National Technical Information Service, distributor], 1985), by Failure Analysis Associates and United States. Ship Structure Committee (page images at HathiTrust)
• Stress-strain-time behavior of soil in one dimensional compression. ([Cambridge?], 1963), by Robert V. Whitman (page images at HathiTrust; US access only)
• Théorie de la résistance de la torsion et de la flexion plane des solides... (Paris, Mallet-Bachelier [etc.], 1862), by Jean-Baptiste-Charles-Joseph Bélanger (page images at HathiTrust)
• Structural frameworks / (New York : Wiley, c1943), by Clyde T. Morris and Samuel T. Carpenter (page images at HathiTrust)
• Framed structures and girders, theory and practice. Volume I. Stresses, part I. (New York, London [etc.] McGraw-Hill book company, 1911), by Edgar Marburg (page images at HathiTrust; US access only)
• The use of polarized light in stress analysis / (1924), by Louis A. Morrison (page images at HathiTrust; US access only)
• Airplane design; a textbook on airplane layout and preliminary design calculations, (Boulder, Colo., c1949), by Karl Dawson Wood (page images at HathiTrust)
• The fatigue of metals. (London : Scott, Greenwood & son, 1924), by H. J. Gough (page images at HathiTrust; US access only)
• Architectural mechanics; statics and strength of materials. Notes for Arch. 49 and 50, College of Architecture and Design, University of Michigan. (Ann Arbor, Mich. [Lithoprinted by Edwards Brothers], 1954), by Walter Van Cleve Marshall (page images at HathiTrust)
• Strains in ironwork. A course of eight elementary lectures delivered before the Society of engineers, in their hall, session 1882-3. (London, New York, E. & F. N. Spon, 1884), by Henry Adams (page images at HathiTrust)
• Theory and practice in designing, (London, Constable & company ltd., 1911), by Henry Adams (page images at HathiTrust)
• Drang und zwang. (München und Berlin : R. Oldenbourg, [©1920]), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust; US access only)
• The strains in framed structures, with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings. (New York, J. Wiley & sons, 1883), by A. Jay Du Bois (page images at HathiTrust)
• Theory of statically indeterminate structures / (New York : McGraw-Hill, 1937), by Walter Maxwell Fife and John Benson Wilbur (page images at HathiTrust)
• Mechanics of materials. (Chicago, Irwin-Farnham Pub. Co., 1948), by Glenn Murphy (page images at HathiTrust)
• Mechanical properties of materials and design. (New York McGraw-Hill, 1942), by Joseph Marin (page images at HathiTrust)
• Presenting Flex-anal charts; a new and modern treatise for design of piping for flexibility (Pittsburgh, Pa., Blaw-Knox company--Power piping division, c1940), by Edwin A. Wert and Samuel Smith (page images at HathiTrust)
• A handy book for the calculation of strains in girders and similar structures, and their strength; consisting of formulæ and corresponding diagrams, with numerous details for practical application, etc. etc. (London, C. Lockwood & son, 1891), by William Humber (page images at HathiTrust)
• Airplane design; a textbook on airplane layout and preliminary design calculations, with emphasis on the economics of design. (Boulder, Colo., c1947), by Karl Dawson Wood (page images at HathiTrust)
• A treatise on the strength of bridges and roofs, (New York, D. Van Nostrand, 1877), by Samuel Henry Shreve (page images at HathiTrust)
• The theory and practice of modern framed structures : Designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley & sons; [etc., etc.], 1905 [c1904]), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (New York, D. Appleton and company, 1883), by Herman Haupt (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts / (New York : J. Wiley, 1903), by Mansfield Merriman (page images at HathiTrust)
• A treatise on roofs and bridges, with numerous exercises; (New York, D. Van Nostrand company, 1898), by Edward A. Bowser (page images at HathiTrust)
• The strains in trusses computed by means of diagrams: with twenty examples drawn to scale. (New York, Appleton, 1872), by Francis A. Ranken (page images at HathiTrust)
• Dynamics, construction of machinery, equilibrium of structures and the strength of materials / (London : Robert Baldwin, 1851), by George Finden Warr (page images at HathiTrust)
• Leçons de mécanique pratique ... (Paris, L. Hachette et cie, 1857), by M. Morin (page images at HathiTrust)
• General theory of bridge construction: containing demonstrations of the principles of the art and their application to practice. (New York, Philadelphia, Appleton, 1851), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (New York, D. Appleton and Company, 1865), by Herman Haupt (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice; furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations. (New York, D. Appleton and Co., 1862), by Herman Haupt (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools, and for engineers in professional practice / (New York : Wiley & Sons ; London : Chapman & Hall, 1903, c1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
• Resistance of materials, for beginners in engineering, (Boston, New York [etc.] Ginn and company, [c1914]), by S. E. Slocum (page images at HathiTrust)
• Wood structural design data. ([Washington], 1943-), by National Lumber Manufacturers Association (page images at HathiTrust; US access only)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice. (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1905), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust; US access only)
• Strains in ironwork, a course of eight elementary lectures delivered before the society of engineers, in their hall, session 1882-3, (London, E. & F.N. Spon, New York, Spon & Chamberlain, 1898), by Henry Adams (page images at HathiTrust)
• A photoelastic investigation of shear and bending stresses in centrally loaded simple beams, (Pittsburgh, Pa., 1937), by Max Mark Frocht, Carnegie Institute of Technology, and Pennsylvania United States. Works Progress Administration (page images at HathiTrust; US access only)
• Moving loads on railway underbridges, including: diagrams of bending moments and shearing forces and tables of equivalent uniform live loads, (London New York, Whittaker & co., 1907), by Harry Bamford (page images at HathiTrust; US access only)
• Strength and determination of the dimensions of structures of iron and steel with reference to the latest investigations ... (New-York, J. Wiley & Sons, 1891), by Jakob Johann Weyrauch, Robert Henry Thurston, and A. Jay Du Bois (page images at HathiTrust)
• Simple practical methods of calculating strains on girders, arches, and trusses; with a supplementary essay on economy in suspension bridges. (London, Macmillan and Co., 1873), by E. W. Young (page images at HathiTrust)
• Effect of type of load on stress analysis of thin-walled ducts / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by J. B. Min, P. K. Aggarwal, and George C. Marshall Space Flight Center (page images at HathiTrust)
• Light airplane crash tests at three pitch angles / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : National Technical Information Service], 1979), by Victor L. Vaughan, Emilio Alfaro-Bou, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Materials constitutive modes for nonlinear analysis of thermally cycled structures / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Albert Kaufman, Larry E. Hunt, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Randall C. Davis, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• Pressures, forces and moments, and shock shapes for a geometrically matched sphere-cone and hyperboloid at Mach 20.3 in helium / (Washington, D.C. : National Aeronatics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by Robert L. Calloway and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Stress waves through projectile joints and interfaces / (Aberdeen Proving Ground, Md. : U.S. Army Laboratory Command, Ballistic Research Laboratory, [1989]), by James M. Bender and U.S. Army Ballistic Research Laboratory (page images at HathiTrust)
• Gear tooth stress measurements on the UH-60A helicopter transmission / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1987), by Fred B. Oswald and Lewis Research Center (page images at HathiTrust)
• Stress intensity and crack displacement for small edge cracks / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1988), by Thomas W. Orange and Lewis Research Center (page images at HathiTrust)
• Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP) : a proposal / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1988), by James F. Saltsman, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Mixed finite element models for free vibrations of thin-walled beams / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; [Springfield, Va. : For sale by the National Technical Information Service], 1989), by Ahmed Khairy Noor, Byung-Jin Min, Jeanne M. Peters, and United States. National Aeronautics and Space Administration. Office of Management (page images at HathiTrust)
• Analyses of surface cracks in finite plates under tension or bending loads / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by J. C. Newman, I. S. Raju, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Analytical procedure for evaluating speckle-effect instrumentation / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Arthur J. Decker, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• An update of the total-strain version of SRP / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by James F. Saltsman, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Hertzian contact in two and three dimensions / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by John H. Tripp and Lewis Research Center (page images at HathiTrust)
• Joint design for improved fatigue life of diffusion-bonded box-stiffened panels / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Randall C. Davis, Russell S. Kanenko, Paul L. Moses, and Langley Research Center (page images at HathiTrust)
• Nonlinear equations for dynamics of pretwisted beams undergoing small strains and large rotations / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Dewey H. Hodges and Aeromechanics Laboratory (page images at HathiTrust)
• Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by K. N. Shivakumar, J. C. Newman, and Langley Research Center (page images at HathiTrust)
• Procedures for characterizing an alloy and predicting cyclic life with the total strain version of strainrange partitioning / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by James F. Saltsman and Gary R. Halford (page images at HathiTrust)
• Tensile stress-strain behavior of boron/aluminum laminates / ([Washington] : National Aeronoautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978), by J. A. Sova, C. C. Poe, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• A nonlinear high temperature fracture mechanics basis for Strainrange Partitioning / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1989), by Takayuki Kitamura, Gary R. Halford, and Lewis Research Center (page images at HathiTrust)
• Analysis and testing of axial compression in imperfect slender truss struts / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990), by Mark S. Lake, Nicholas Georgiadis, and Langley Research Center (page images at HathiTrust)
• Open-mode delamination stress concentrations in horseshoe and elliptic composite curved bars subjected to end forces / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, VA : For sale by the National Technical Information Service, 1990), by William L. Ko, Raymond H. Jackson, and Dryden Flight Research Facility (page images at HathiTrust)
• Elastic-plastic finite-element analysis of thermally cycled double-edge wedge specimens / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by Albert Kaufman, Larry E. Hunt, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Effects of static tensile load on the thermal expansion of Gr/PI composite material / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by Gary L. Farley, Army Research and Technology Laboratories (U.S.). Structures Laboratory, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Computer analysis of multicircuit shells of revolution by the field method / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]), by Gerald A. Cohen, Langley Research Center, and Structures Research Associates (page images at HathiTrust)
• Experimental evaluation of stresses in spherically hollow balls / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Experimental evaluation of stresses in cylindrically hollow (drilled) balls / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• DESAP 1 : a structural design program with stress and displacement constraints / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by G. B. Reddy and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Spin test of turbine rotor / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1972]), by Michael H. Vavra, Lawrence E. Bell, James E. Hammer, United States National Aeronautics and Space Administration, and Naval Postgraduate School (U.S.) (page images at HathiTrust)
• Dynamic response of high-frequency pressure transducers to large amplitude sinusoidal pressure oscillations / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service [distributor], 1972), by Richard E. Robinson, Lewis Research Center, and Battelle Memorial Institute (page images at HathiTrust)
• Tensile stress-strain behavior of graphite/epoxy laminates / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1982), by D. P. Garber, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Kentron Technical Center, and Langley Research Center (page images at HathiTrust)
• An improved exceedance theory for combined random stresses / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974), by Harold C. Lester and Langley Research Center (page images at HathiTrust)
• Fatigue damage under varying stress amplitudes / (Washington : National Aeronautics and Space Administration, [1960]), by H. W. Liu, H. T. Corten, and University of Illinois (Urbana-Champaign campus) (page images at HathiTrust)
• Effect of a load-alleviating structure on the landing behavior of a reentry-capsule model / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1961]), by Edward L. Hoffman, John R. McGehee, Sandy M. Stubbs, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Determination of the creep deflection and lifetime of aluminum-alloy multiweb box beams subjected to varied loads at constant temperature / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, 1962]), by Avraham Berkovits and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress-strain behavior of tungsten-fiber-reinforced copper composites / (Washington, D.C. : National Aeronautics and Space Administration, [1963]), by David L. McDanels, John W. Weeton, Robert W. Jech, and Lewis Research Center (page images at HathiTrust)
• Investigation of the response of multiweb beams to static and dynamic loading. Wilbur B. Fichter and Eldon E. Kordes. (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by W. B. Fichter, Eldon E. Kordes, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Thermal and structural tests of René 41 honeycomb integral-tank concept for future space transportation systems / (Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992), by John L. Shideler and Dryden Flight Research Facility (page images at HathiTrust)
• Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1985), by Albert Kaufman, Shoi Y. Hwang, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Predicted and measured strain responses of isotropic panels to base excitation / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by Karen H. Lyle, Edward F. Daniels, Jack D. Leatherwood, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Delamination stresses in semicircular laminated composite bars / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988), by William L. Ko and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division (page images at HathiTrust)
• Vibration characteristics of walls and a plate glass window representative of those of a wood-frame house / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Huey D. Carden, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Elevated-temperature application of the IITRI compression test fixture for graphite/polyimide filmentary composites / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by B. Basava Raju, Paul A. Cooper, Charles J. Camarda, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• Light airplane crash tests at three roll angles / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Claude B. Castle, Emilio Alfaro-Bou, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• A critical examination of stresses in an elastic single lap joint / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979), by Paul A. Cooper, James Wayne Sawyer, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Langley Research Center (page images at HathiTrust)
• An assessment of the accuracy of orthotropic photoelasticity / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1984), by M. W. Hyer, D. H. Liu, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• On the determination of micromorphic material constants from properties of the constituents / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information [distributor], 1969), by Richard F. Maye, General Technology Corporation, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Finite element computer program to analyze cracked orthotropic sheets / (Washington : U.S. National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by C. S. Chu, United States National Aeronautics and Space Administration, and Lockheed-Georgia Company (page images at HathiTrust)
• Stresses in a webbed ball / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975), by Lester J. Nypan, Lewis Research Center, and Northridge California State University (page images at HathiTrust)
• Some inconsistencies of the finite element method as applied to inelastic response / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by Manobar P. Kamat, Douglas E. Killian, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Mathematical modeling of damage in unidirectional composites / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch; [Springfield, Va. : For sale by the National Technical Information Service], 1981), by J. G. Goree, Walter F. Jones, Lokeswarappa R. Dharani, Langley Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch (page images at HathiTrust)
• A Study of the stress wave factor technique for the characterization of composite materials / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by Edmund G. Henneke, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, and Lewis Research Center (page images at HathiTrust)
• Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints : summary / (Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1983), by J. B. Cushman, S. H. Ward, S. F. McCleskey, Langley Research Center, and Boeing Aerospace Company (page images at HathiTrust)
• Behavior of a flat stretched membrane wrinkled by the rotation of an attached hub / (Washington, D.C. : National Aeronautics and Space Administration, 1964), by Martin Milton Mikulas, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• The influence of fixture stress concentrations on ring accelerometers / (Washington, D. C. : National Aeronautics and Space Administration ; Springfield, Va. : for sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by James A. Nagy, Charles E. Henley, Goddard Space Flight Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stresses caused by an in-plane line load used to rotate a thin-walled spherial satellite / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by W. Jefferson Stroud, Nancy P. Sykes, United States National Aeronautics and Space Administration, and Langley Research Center (page images at HathiTrust)
• Rim-spoke composite flywheels : stress and vibration analysis / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by C. C. Chamis, Louis J. Kiraly, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Minimum-mass design of filamentary composite panels under combined loads : design procedure based on simplified buckling equations / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1976), by W. Jefferson Stroud, Nancy Agranoff, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Finite-element computer program for axisymmetric loading situations where components may have a relative interference fit / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Christopher M. Taylor, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Stress concentrations in filament-stiffened sheets of finite length / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1970), by W. B. Fichter, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Three-deminsional finite-element analysis of finite-thickness fracture specimens / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by I. S. Raju, J. C. Newman, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Estimation of stiffening effect of shaft and housing material outside projected area of a rolling element bearing / (Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977), by Christopher M. Taylor, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A numerical procedure for calculating stress and deformation near a slit in a three-dimensional elastic-plastic solid / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1968), by David J. Ayres, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Three-dimensional elastic stress and displacement analysis of tensile fracture specimens containing cracks / (Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973), by John P. Gyekenyesi, Jon Kring, Alexander Mendelson, U.S. Army Air Mobility Research and Development Laboratory, and Lewis Research Center (page images at HathiTrust)
• Non-Hookean, premacroyield stress-strain behavior of several ionic single crystals / (Washington, D.C. : National Aeronautics and Space Administration : For sale by the Office of Technical Services, Dept. of Commerce, [1964]), by Carl A. Stearns, Edward R. Gotsky, and Lewis Research Center (page images at HathiTrust)
• Effects of creep stress on particulate aluminum-copper alloys / (Washington : National Aeronautics and Space Administration, [1959]), by Ervin E. Underwood, G. K. Manning, and Battelle Memorial Institute (page images at HathiTrust)
• A tabulation of wind-tunnel pressure data and section aerodynamic characteristics at Mach numbers of 1.61 and 2.01 for a reflex cambered wing and a cambered and twisted wing having the same swept planform / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by Emma Jean Landrum and United States National Aeronautics and Space Administration (page images at HathiTrust)
• A preliminary experimental investigation of an energy-absorption process employing frangible metal tubing / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce], [1962]), by John R. McGehee and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Investigations of grain-boundary stress concentrations in silver chloride / (Washington : National Aeronautics and Space Administration, [1961]), by Lawrence E. Goodman and University of Minnesota (page images at HathiTrust)
• An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical, Springfield, Virginia 22151], 1971), by J. C. Newman, Langley Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Moments and stresses in slabs, ([Washington, D. C. : National research council, 1921]), by Harold Malcolm Westergaard and Willis Appleford Slater (page images at HathiTrust)
• Shelter design and strengthening-consolidating circular ... (London, H.M. Stationery Off., 1942), by Great Britain Ministry of Home Security (page images at HathiTrust)
• Static and dynamic J-R curve testing of A533B steel using the key curve analysis technique / (Washington, D.C. : The Commission, 1981), by J. A. Joyce, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, and United States Naval Academy (page images at HathiTrust)
• The determination of the safe working stress for railway bridges of wrought iron and steel ... ([Calcutta?, 1899?]), by E Herbert Stone (page images at HathiTrust; US access only)
• Elementary theory and design of flexural members / (New York : Wiley, 1950), by Jamison Vawter and James G. Clark (page images at HathiTrust)
• Elementary stress analysis. (New York : Pitman Pub. Corp., 1949), by Philip Ervin Soneson (page images at HathiTrust)
• Strength and elasticity of structural members / (London : E. Arnold, [1906]), by Richard John Woods (page images at HathiTrust; US access only)
• Continuity in concrete building frames. (Chicago, Ill., Portland cement association, [1937]), by Portland Cement Association (page images at HathiTrust)
• The theory of structures / (London : E. Arnold, 1909), by Richard John Woods (page images at HathiTrust; US access only)
• Die Festigkeitslehre. Elementares Lehrbuch. (Stuttgart, Bergsträsser, 1902), by R. Lauenstein (page images at HathiTrust; US access only)
• Referance book for statical calculations. (Rapid statics.) Force-diagrams for frameworks, tables, instructions for statical calculations etc. for all classes of building and engineering. Published for the practical use of boards of works, architects and engineers, (London, E. & F.N. Spon, ltd; New York, Spon & Chamberlain, 1905-), by Francis Ruff (page images at HathiTrust; US access only)
• A course in modern timber engineering; the use of lumber as an engineering material, (New Orleans, La., Southern pine association, 1946), by Howard James Hansen and Southern Pine Association, ed. by Walter Fleming Scofield (page images at HathiTrust)
• Trusses and arches analyzed and discussed by graphical methods / (New York : John Wiley and Sons, c1890), by Charles E. Greene (page images at HathiTrust)
• Allowable bending stresses of wood for use in portable wood ladders / (Madison, Wis. : Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1975), by Fred Werren, United States Forest Service, and Forest Products Laboratory (U.S.) (page images at HathiTrust; US access only)
• A semi-infinite plate on an elastic foundation / (Hanover, N.H. : Cold Regions Research and Engineering Laboratory, 1965), by D. E. Nevel and Cold Regions Research and Engineering Laboratory (U.S.) (page images at HathiTrust)
• A photoelastic study of the influence of non-singular stresses in fracture test specimens /, by R. J. Sanford, G. R Irwin, R. Chona, W. L. Fourney, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, Oak Ridge National Laboratory, and College Park. Photomechanics Laboratory University of Maryland (page images at HathiTrust)
• Boussinesq's problem for a heated punch : I. Solution for a cylindrical punch, II. Solution for a conical punch /, by Dick Leon George, Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• STRESsOUT--a data reduction program for inferring stress state of rock having isotropic material properties : a user's manual /, by Mark K. Larson and United States Bureau of Mines (page images at HathiTrust)
• Some isoperimetric inequalities in the torsion problem for multiply-connected regions /, by L. E. Payne, College Park. Institute for Fluid Dynamics and Applied Mathematics University of Maryland, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
• A Reciprocal theorem for linear electrostriction with some applications /, by R. J. Knops, College Park. Institute for Fluid Dynamics and Applied Mathematics University of Maryland, and United States. Air Force. Office of Scientific Research (page images at HathiTrust)
• Boussinesq's problem for a heated punch : I. General Theory /, by Dick Leon George, Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• A Class of solutions of the equations of thermoelastic equilibrium /, by Ian Naismith Sneddon, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• Stress in the vicinity of a crack in a thick elastic plate /, by Morton Lowengrub, United States. Air Force. Office of Scientific Research, and Duke University (page images at HathiTrust)
• The statically-indeterminate stresses in frames commonly used for bridges, (New York : D. Van Nostrand company, 1905), by Isamu Hiroi (page images at HathiTrust)
• Die statik im flugzeugbau, (Berlin, R. C. Schmidt & co., 1917), by Johannes Schwengler (page images at HathiTrust; US access only)
• Plate-girder construction... (New York, D. Van Nostrand co., 1893), by Isami Hiroi (page images at HathiTrust)
• New formulas for the loads and deflections of solid beams and girders. (London, New York, E. & F.N. Spon, 1872), by William Donaldson (page images at HathiTrust)
• Experiments on the flexure of beams, discovery of new laws, (New York, D. Van Nostrand Co., 1903), by Albert E. Guy (page images at HathiTrust)
• Congrès international des méthodes d'essai des matériaux de construction, tenu à Paris du 9 au 16 juillet 1900...Procès-verbaux, (Paris, C. Dunod, 1901), by Congrès international des méthodes d'essai des matériaux de construction. Paris, France. Ministère du commerce, and France) Direction générale de l'exploitation Exposition universelle internationale de 1900 (Paris (page images at HathiTrust; US access only)
• Economics of construction in relation to framed structures, (London, New York, E. & F. N. Spon; [etc., etc.], 1873), by Robert H. Bow (page images at HathiTrust)
• Principles of economy in the design of metallic bridges; (New York, Wiley, 1891 [c1884]), by Charles B. Bender (page images at HathiTrust)
• The graphic method by influence lines for bridge and roof computations, (New York, J. Wiley & Sons; [etc., etc.], 1912), by William H. Burr and Myron S. Falk (page images at HathiTrust)
• Die Festigkeitslehre. Elementares Lehrbuch für den Schul- und Selbstunterricht sowie zum Gebrauch in der Praxis, nebst einem Anhang enthaltend Tabellen der Potenzen, Wurzeln, Kreisumfänge und Kreisinhalte. (Stuttgart, A. Bergsträsser, 1901), by R. Lauenstein (page images at HathiTrust; US access only)
• Moment distribution; a rapid method of analysis for rigid-jointed structures. (New York, Wiley, 1961), by Edgar Lightfoot (page images at HathiTrust)
• Curves for calculating beams, channels and reactions; a manual for engineers, architects, designers, draughtsmen, builders and contractors, (New York, McGraw publishing company, 1908), by Sidney Diamant (page images at HathiTrust; US access only)
• Rahmenformeln. Gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus aisen- oder eisenbetonkonstruktion, nebst anhang mit sonder fällen teilweise und ganz eingespannter träger... (Berlin, Wilhelm Ernst W. Sohn, 1914), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• True stress vs. elongation recorder / (Watertown, Mass. : Watertown Arsenal [distributed by U.S. Dept. of Commerce, Office of Technical Services], 1955), by D. E. Driscoll, T. S. DeSisto, and Watertown Arsenal (Mass.) (page images at HathiTrust; US access only)
• Maximum stresses in framed bridges. (New York, D. Van Nostrand, 1914), by Wm. Cain (page images at HathiTrust)
• Continuity in concrete building frames; practical analysis for vertical load and wind pressure. (Chicago, Ill., Portland cement association, [1942]), by Portland Cement Association (page images at HathiTrust)
• Eccentric loads on concrete. (Ann Arbor, Mich., Edwards bros., inc., 1943), by Leonard Thomas Evans (page images at HathiTrust)
• Stresses in structures and the accompanying deformations. (Columbus, Ohio [Hann & Adair, printers], 1907), by Albert Henry Heller (page images at HathiTrust)
• Der Spannungszustand in rechteckigen Platten. (München : R. Oldenbourg, 1913), by Heinrich Hencky (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (New York, J. Wiley & sons; [etc., etc.], 1896), by Mansfield Merriman (page images at HathiTrust)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (New York, J. Wiley & sons; [etc., etc.], 1899), by Mansfield Merriman (page images at HathiTrust)
• Design of beams and columns / (Scranton, Pa. : International Textbook Co., c1930), by International Correspondence Schools (page images at HathiTrust)
• Translation key to Kleinlogel's Rahmenformeln (New York, Frederick Ungar Publishing Co., [1945]), by Adolf Kleinlogel and F. S. Morgenroth (page images at HathiTrust)
• Secondary stresses in bridge trusses, (New York, J. Wiley & Sons; [etc.], 1908), by C. R. Grimm (page images at HathiTrust)
• Drang und zwang : eine höhere festigkeitslehre für ingenieure / (München, Berlin, R. Oldenbourg, 1924-), by Aug. Föppl and Ludwig Föppl (page images at HathiTrust; US access only)
• Handbook of rigid frame analysis, (Ann Arbor, Mich., Printed by Edwards brothers, c1934), by Leonard Thomas Evans (page images at HathiTrust)
• The theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice, (New York, Wiley, 1914-17), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• Near surface stress measurements in a candidate rock mass for superconductive magnetic energy storage / (1982), by Dennis J. Fischer (page images at HathiTrust)
• Stau bei Flussbrücken : begründung einer neuen Stauformel / (Stuttagart : Konrad Wittwer, 1913), by A. Hofmann (page images at HathiTrust; US access only)
• Statically indeterminate frameworks. (Chapel Hill, University of North Carolina Press, 1949), by Thomas Felix Hickerson (page images at HathiTrust)
• Mechanics of the girder: a treatise on bridges and roofs, in which the necessary and sufficient weight of the structure is calculated, not assumed ... (New York, J. Wiley and Sons, 1886), by John Davenport Crehore (page images at HathiTrust)
• Biegung, schub und scherung in stäben von zusammengesetzten und mehrteiligen querschnittsformen mit gleichen und wechselnden trägheitsmomenten auf grund der zerlegung in ihre einzelteile mit rechnerischen untersuchungen an beispielen und zeichnerischen darstellungen. (Berlin, W. Ernst & sohn, 1909), by Richard Sonntag (page images at HathiTrust; US access only)
• Theory of notch stresses; principles for exact stress calculation. (Ann Arbor, Mich., J.W. Edwards, 1946), by Heinz Neuber and Fritjof Andersen Raven, ed. by J. S. Brock (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials, and of beams, columns, and shafts. (New York, J. Wiley & sons; London, Chapman & Hall, limited, 1895), by Mansfield Merriman (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses : arched ribs and suspension bridges, prepared for the Department of Civil Engineering at the Rensselaer Polytechnic Institute / (New York : J. Wiley & Sons, 1889), by William H. Burr (page images at HathiTrust)
• Plastic deformation of metals : survey of literature, 1940-1946 / (New York : American Iron and Steel Institute, c1948), by American Iron and Steel Institute, E. C. Smith, W. O. Everling, Anson Hayes, and American Iron and Steel Institute. Subcommittee on Plastic Flow (page images at HathiTrust)
• Materials and constructions, a text-book of elementary structural design, (Philadelphia, P. Blakiston's Son & Co., 1912), by James Alfred Pratt (page images at HathiTrust)
• Berechnung ebener, rechteckiger Platten mittels trigonometrischer Reihen. (München : R. Oldenbourg, 1911), by Karl Hager (page images at HathiTrust; US access only)
• Allowable loads on eccentrically loaded concrete columns / (Atlanta : Morris, 1947), by I. E. Morris (page images at HathiTrust)
• Maximum stresses under concentrated loads, treated graphically. (New York, D. Van Nostrand Company, 1890), by Henry T. Eddy (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice, furnishing the means of calculating the strains upon the chords, ties, braces, counter-braces, and other parts of a bridge or frame of any description. With practical illustrations / (New York : D. Appleton, 1869), by Herman Haupt (page images at HathiTrust)
• Stresses in structures and the accompanying deformations / (Columbus, Ohio : Hann & Adair, 1905), by A. H. Heller (page images at HathiTrust)
• Stresses in structures, (New York, John Wiley & sons, inc.; [etc., etc.], 1916), by Albert Henry Heller and Clyde T. Morris (page images at HathiTrust; US access only)
• Analytische ermittelung und anwendung von einflusslinien : einiger im eisenbetonbau häufig vorkommender statisch unbestimmter träger / (Berlin : Ernst & Sohn, [1908]), by Arthur Lederer and Rud Wolle (page images at HathiTrust; US access only)
• Analysis of continuous frames by the method of restraining stiffnesses, (San Francisco, Ellison and Russell, [c1934]), by Earle Brewster Russell (page images at HathiTrust)
• Die Äussern und innern Kräfte an statisch bestimmten Brücken- und Dachstuhlconstructionen. (Zürich, 1875), by L. Tetmajer (page images at HathiTrust)
• A course on the stresses in bridge and roof trusses; arched ribs and suspension bridges, (New York, Wiley, [c1886]), by William H. Burr (page images at HathiTrust)
• New departure engineering data : analysis of stresses and deflections. (Bristol, Conn. : New departure, division General motors corp., c1946), by General motors sales corporation. New departure division and A. Burton Jones (page images at HathiTrust)
• On the state of stress near curvilinear holes in shells / (Washington : National Aeronautics and Space Administration : For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, VA, 1966), by Guriĭ Nikolaevich Savin and Guz,́ A. N. (page images at HathiTrust; US access only)
• Stress-intensity factors for a single-edge-notch tension specimen by boundary collocation of a stress function / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1964), by Bernard Gross, William F. Brown, John E. Srawley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Experimental determination of the dependence of crack extension force on crack length for a single-edge-notch tension specimen / (Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1964), by John E. Srawley, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Stress analysis and design of elementary structures. (New York, J. Wiley, [1948]), by James H. Cissel (page images at HathiTrust)
• An analysis of the stress distributions in and near stress gages embedded in elastic solids. ([Denver, U. S. Bureau of Reclamation, 1950]), by G. E. Monfore (page images at HathiTrust)
• The structural behavior of Hungry Horse Dam. (Denver : Technical Information Branch, Denver Federal Center, [1959]), by Joe T. Richardson (page images at HathiTrust)
• Experimental determination of eccentricity of floor loads applied to a bearing wall / (Washington : U.S. National Bureau of Standards; for sale by the Supt. of Docs., U.S. Govt. Print. Off, 1968), by D. Watstein and Paul Victor Johnson (page images at HathiTrust)
• Photoelastic stress analysis of bridge piers, (Denver, Technical Information Office, [1952]), by H. Boyd Phillips and Carl N. Zangar (page images at HathiTrust)
• Engineering and design : working stresses for structural design. (Washington, D.C. : Dept. of the Army, Office of the Chief of Engineers, 1963), by United States Army Corps of Engineers (page images at HathiTrust)
• The narrow infinite wedge on an elastic foundation / (Wilmette, Ill. : U.S. Army Snow Ice and Permafrost Research Establishment, Corps of Engineers, 1958), by D. E. Nevel (page images at HathiTrust)
• Theoretical analysis of scabbing in materials : interim technical report / (University Park], 1955-1958), by Pennsylvania State University. Dept. of Engineering mechanics, Norman Davids, Pennsylvania State University. Dept. of Engineering mechanics. Scabbing and fracture of materials by stress waves, and United States. Office of Ordnance Research (page images at HathiTrust; US access only)
• On the duality between the problems of stretching and of bending of plates / (Washington, D.C. : National Aeronautics and Space Administration, 1967), by Z. M. Elias (page images at HathiTrust; US access only)
• Applied mechanics. (Roorkee, Printed and published at the Thomason college press, 1877), by Allan Joseph Champneys Cunningham (page images at HathiTrust)
• General theory of bridge construction : containing demonstrations of the principles of the art and their application to practice ... (New York : D. Appleton, 1851), by Herman Haupt (page images at HathiTrust; US access only)
• Résistance des matériaux, (Paris, L. Hachette et Cie., 1862), by M. Morin (page images at HathiTrust)
• The place of photoelasticity in engineering instruction, / (Pittsburgh, Pa., 1937), by Max Mark Frocht, Carnegie Institute. Institute of technology, and United States. Works Progress Administration of Pennsylvania (page images at HathiTrust)
• Cyclic creep-rupture behavior of three high-temperature alloys / (Washington, D.C. : National Aeronautics and Space Administration ; Springfield, VA : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1971), by Gary R. Halford, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust; US access only)
• Deflections and statically indeterminate stresses, (New York, J. Wiley & sons; [etc., etc.], 1911), by Clarence W. Hudson (page images at HathiTrust)
• Strength and elasticity of structural members, (London, E. Arnold, 1903), by Richard John Woods (page images at HathiTrust; US access only)
• Beton und Eisen. (Berlin, W. Ernst & Sohn.) (page images at HathiTrust; US access only)
• A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges, (New York, J. Wiley & Sons [etc. etc.], 1902), by William H. Burr (page images at HathiTrust)
• The design of steel mill buildings and the calculation of stresses in framed structures. (New York, The Engineering News Pub. Co., 1904), by Milo Smith Ketchum (page images at HathiTrust)
• Die neueren Methoden der Festigkeitslehre und der Statik der Baukonstruktionen. (Leipzig, A. Kröner, 1913), by Heinrich Mueller-Breslau (page images at HathiTrust; US access only)
• Engineering construction ... (London, Longmans, Green, and Co., 1910-21), by William Henry Warren (page images at HathiTrust)
• The mechanics of engineering, (New York, Wiley, 1902), by A. Jay Du Bois (page images at HathiTrust)
• Simplified formulas and tables for floors, joists and beams; roofs, rafters and purlins, (New York, Wiley, 1913), by N. Clifford Ricker (page images at HathiTrust)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. : also, determination of dimensions and designing of details, specifications and contracts, complete designs and working drawings / (New York : J. Wiley, 1888, c1883), by Jay Du Bois (page images at HathiTrust)
• Stresses in structural steel angles, with special tables, (New York, John Wiley & sons, inc.; [etc., etc.], 1917), by L. A. Waterbury (page images at HathiTrust)
• Leçons de mécanique pratique : à l'usage des auditeurs des cours du conservatoire des arts et métiers, et des sous-officiers et ouvriers d'artillerie / (Paris : Libraire Scientifique - Industrielle de L. Mathias (Augustin), 1846-1953), by M. Morin (page images at HathiTrust)
• The design of structures: a practical treatise on the building of bridges, roofs, &c., (London, C. Griffin & Co., Ltd., 1919), by S. Anglin (page images at HathiTrust; US access only)
• Airplane design; a textbook on airplane layout and stress analysis calculations, with particular emphasis on economics of design. (Lafayette, Ind., The author; Distrib. by Cornell Co-op Society, Ithaca, N.Y., 1941), by Karl Dawson Wood (page images at HathiTrust)
• The dynamics of particles and of rigid, elastic, and fluid bodies. Being lectures on mathematical physics, (Leipzig, B.G. Teubner, 1904), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• A practical guide for puddling iron and steel / (Philadelphia : H. C. Baird, 1868), by Éd Urbin and A. Brüll, trans. by A. A. Fesquet (page images at HathiTrust)
• Introduction to the mathematical theory of the stress and strain of elastic solids / (London : Longmans, Green, 1894), by Benjamin Williamson (page images at HathiTrust)
• Piping : flexibility and stresses / (New York : Cornell Maritime Press, 1941), by Spiros Dionisios Vinieratos and Dominick Raoul Zeno (page images at HathiTrust)
• The application of quaternions to the analysis of internal stress ... (Denver, J. B. Stott, printer, 1901), by Charles Worthington Comstock (page images at HathiTrust)
• Graphics and structural design, (New York, John Wiley & sons, inc.; [etc., etc.], 1913), by Howard Drysdale Hess (page images at HathiTrust)
• Studies of slab and beam highway bridges (Urbana, Ill. : Engineering Experiment Station, University of Illinois, 1946-), by N. M. Newmark, Illinois. Division of Highways, United States. Bureau of Public Roads, and University of Illinois at Urbana-Champaign. Engineering Experiment Station (page images at HathiTrust)
• Live-load stresses in railway bridges, with formulas and tables, (New York, John Wiley & Sons, Inc.; [etc., etc.], 1916), by George E. Beggs (page images at HathiTrust)
• Mechanics of internal work (or work of deformation) in elastic bodies and systems in equilibrium, including the method of least work, (New York, J. Wiley & sons; [etc., etc.], 1910), by Irving P. Church (page images at HathiTrust)
• Über die festigkeit veränderlich elastischer konstruktionen, insbesondere von eisenbetonbauten. Ein beitrag zur erforschung der inneren kräfte und deformationen sowie zum gebrauch bei der berechnung und ausführung armierter betonbalken, -stützen und - gewölbe. (Leipzig, Baumgärtner's buchhandlung, 1904), by Rudolf Saliger (page images at HathiTrust; US access only)
• Tables for stress calculation & problems in deflections / (1914), by John R. Lambert (page images at HathiTrust; US access only)
• An analysis of the stresses in the Michigan avenue two ringed arch bridge over the Grand River at Lansing, Michigan / (1912), by Duane A. Blair and Channing Wilson Parsons (page images at HathiTrust; US access only)
• Pressure of granular substances in long tubes / (1898), by Frank V. Warren (page images at HathiTrust; US access only)
• Rahmenformeln; gebrauchsfertige Formeln für einhüftige, zweistielige, dreieckförmige und geschlossene Rahmen aus Eisen- oder Eisenbeton konstruktion nebst Anhang mit Sonderfällen teilweise und ganz eingespannter Träger. (Berlin, W. Ernst, 1921), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• Strength and calculation of dimensions of iron and steel constructions, with reference to the latest experiments. (New York, D. Van Nostrand, 1877), by Jacob J. Weyrauch (page images at HathiTrust)
• Effects of stress relief and other changes in stress on the physical properties of rock / ([Washington] : U.S. Dept. of Interior, Bureau of Mines, [1962]), by Leonard Obert and United States Bureau of Mines (page images at HathiTrust; US access only)
• Manual on experimental stress analysis techniques. (Cambridge, Mass., c1959), by Society for Experimental Stress Analysis (page images at HathiTrust; US access only)
• Catalog of equipment used in experimental stress analysis. (Cambridge, Mass., 1958), by Society for Experimental Stress Analysis (page images at HathiTrust; US access only)
• Stresses in framed structures, (New York, London, McGraw-Hill Book Company, inc., 1942), by George Albert Hool, George Campbell Ernst, Roy Richard Zipprodt, and W. S. Kinne (page images at HathiTrust; US access only)
• Discontinuity stresses in shells general model / (Santa Monica : Missile & Space Systems Division, Douglas Aircraft Co., 1962), by R. R. Meyer and Douglas Aircraft Company (page images at HathiTrust; US access only)
• The calculations for steel-frame structures, designed to comply with the requirements of the London County council (General powers) act, 1909, with notes on the application of theory to practical design, (London, Scott, Greenwood and son;, 1925), by Walter Cyril Cocking (page images at HathiTrust; US access only)
• Rahmenformeln; gebrauchsfertige formeln für einhüftige, zweistielige, dreieckförmige und geschlossene rahmen aus eisen- oder eisenbetonkonstruktion nebst anhang mit sonderfällen teilweise und ganz eingespannter sowie durchlaufender träger, (Berlin, W. Ernst & sohn, 1925), by Adolf Kleinlogel (page images at HathiTrust; US access only)
• Statique graphique élémentaire et notions préliminaires de résistance des matériaux, à l'usage des élèves architectes, ingénieurs, etc., suivies des tables des poutres & poutrelles en bois et en fer, classées par ordre numérique de modules de section I/v, (Paris, Girardot & cie, 1925), by M. Darras (page images at HathiTrust; US access only)
• The dynamics of particles and of rigid, elastic, and fluid bodies ; being lectures on mathematical physics / (Leipzig : B. G. Teubner, 1925), by Arthur Gordon Webster (page images at HathiTrust; US access only)
• The strength of materials; a treatise on the theory of stress calculations for engineers, (New York, Longmans, Green & co.; London, E. Arnold & co., 1925), by John Case (page images at HathiTrust; US access only)
• Schwindspannungen in trägern aus eisenbeton; ein beitrag zu ihrer theorie samt ableitung von gebrauchsformeln auf grund neuerer versuche, (Leipzig, A. Kröner, 1925), by Leopold Herzka (page images at HathiTrust; US access only)
• Die elastischen Platten : die Grundlagen und Verfahren zur Berechnung ihrer Formänderungen und Spannungen, sowie die Anwendungen der Theorie der ebenen zweidimensionalen elastischen Systeme auf praktische Aufgaben / (Berlin : Springer, 1925), by Arpád Nádai (page images at HathiTrust; US access only)
• The calculations for steel-frame structures : designed to comply with the requirements of the London County Council (General Powers) Act, 1909 ... / by Walter Cyril Cocking. (London : Scott, Greenwood, 1925), by Walter Cyril Cocking (page images at HathiTrust; US access only)
• Applied elasticity, (East Pittsburgh, Pa., Westinghouse technical night school press, 1925), by Stephen Timoshenko and John Moyes Lessells (page images at HathiTrust)
• Investigation of shearing stresses in reinforced concrete beams / (1916), by Wilhelm Neilson (page images at HathiTrust; US access only)
• A text-book on the mechanics of materials and of beams, columns, and shafts. (New York : J. Wiley & sons, 1885), by Mansfield Merriman (page images at HathiTrust)
• Structural mechanics. A handbook for engineers, architects, and students. (London, G. Bell & sons [etc.], 1890), by Richard Marion Parkinson (page images at HathiTrust)
• Graphic and analytic statics in their practical application to the treatment of stresses in roofs, solid girders, lattice, bowstring and suspension bridges, braced iron arches and piers, and other frameworks. (London, Crosby Lockwood and co., 1887), by Robert H. Graham (page images at HathiTrust)
• Theorie der Maximalmomente einfacher Träger bei concentrirter Verkehrslast / (Mainz : V. von Zabern, 1883), by J. B. Goebel (page images at HathiTrust)
• The theory of stresses in girders and similar structures, with practical observations on the strength and other properties of materials. (London, Longmans, Green, and co., 1886), by Bindon Blood Stoney (page images at HathiTrust)
• A practical treatise on the strength of material: including their elasticity and resistance to impact. (London, New York, E. & F.N. Spon, 1893), by Thomas Box (page images at HathiTrust)
• Stresses in girder and roof trusses, for both dead and live loads by simple multiplication : with stress constants for 100 cases. (London : Spon, 1894), by F. R. Johnson (page images at HathiTrust)
• Schwächung des arbeitsvermögens der materialien durch spannungswechsel, (Zürich, Albert Müller, 1894), by Friedrich Autenheimer (page images at HathiTrust)
• Versuche über die Widerstandsfähigkeit ebener Platten. (Berlin, Julius Springer, 1891), by Carl Bach (page images at HathiTrust)
• The strains in framed structures : with numerous practical applications to cranes, bridge, roof and suspension trusses, braced arches, pivot and draw spans, continuous girders, etc. Also, determination of dimensions and designing of details ... / (New York : J. Wiley & sons, 1884), by A. Jay Du Bois (page images at HathiTrust)
• Calcul simplifié des poutres droites à plusieurs travées ... (Paris, 1887), by Édouard Linglin (page images at HathiTrust)
• The theory and practice of modern framed structures : designed for the use of schools and for engineers in professional practice / (New York : J. Wiley & Sons, 1902, c1893), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• A practical treatise on the strength of material: including their elasticity and resistance to impact. (London, New York, E. & F.N. Spon, 1883), by Thomas Box (page images at HathiTrust)
• Memoria; punti di rottura e calo totale degli archi gravati di pesi continui, o discontinui. Coefficienti di elasticità delle pietre ... ([Napoli, Trani, 1887]), by Alessandro Bajo (page images at HathiTrust)
• Die zusatzkräfte und nebenspannungen eiserner fachwerkbrücken : eine systematische darsteillung der verschiedenen arten ... (Berlin : [s.n.], 1892-1893), by Friedrich Engesser (page images at HathiTrust)
• The theory and practice of modern framed structures. Designed for the use of schools, and for engineers in professional practice / (New York : J. Wiley & sons, 1901 [c1893]), by J. B. Johnson, F. E. Turneaure, and Chales Walter Bryan (page images at HathiTrust)
• Tables for finding the strains in railway bridge trusses under the action of a concentrated load system : Reprinted from Strains in famed structures. (New York : J. Wiley & sons, 1885), by Augustus Jay DuBois (page images at HathiTrust)
• Applications de la statique graphique. (Paris : [s.n.], 1889), by Maurice Koechlin (page images at HathiTrust)
• Stresses and thrusts : a text-book for students / (London : B.T. Batsford, 1895), by G. A. T. Middleton and G. A. T. Middleton (page images at HathiTrust)
• Treatise on the theory of the construction of bridges and roofs. Illustrated with numerous wood engravings. (New York, J. Wiley & sons, 1883), by De Volson Wood (page images at HathiTrust)
• Stress diagrams in open or lattice girder work, in steel and iron, continuous girders, suspension bridges and rigid arches. (London, Gale & Polden, ltd., [1894]), by W. H. Bidder (page images at HathiTrust)
• Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910: Expansion of Pipes, Paper No. 1167, by Ralph C. Taggart (Gutenberg ebook)

More items available under narrower terms.