The Online Books Page

Structural frames -- Tables

See also what's at your library, or elsewhere.

• Structural frames
• Structural engineering -- Tables
• Tables

• Girders -- Tables

• Handbook of Frame Constants: Beam Factors and Moment Coefficients for Members of Variable Section (c1947), by Portland Cement Association (page images at HathiTrust)

• Transient response of beams to correlated random excitation at the boundaries (The Division, 1979), by A. Aryafar, F. E. Udwadia, S. F. Masri, University of Southern California, and U.S. Nuclear Regulatory Commission. Division of Reactor Safety Research (page images at HathiTrust)
• Abaques; des efforts tranchants, et des moments de flexion développés dans les poutres à une travée par les surcharges du règlement du 29 août 1891 sur les ponts métalliques. (G. Carré & C. Naud, 1899), by Marcelin Duplaix (page images at HathiTrust)
• Flexibilities. ([Stillwater], 1963), by Oklahoma State University. School of Civil Engineering and Oklahoma State University. Office of Engineering Research and Engineering Experiment Station (page images at HathiTrust)

• Handbook of steel erection (McGraw-Hill book company, inc., 1923), by M. C. Bland (page images at HathiTrust)
• Short cuts in concrete & steel design. ([Detroit?], 1951), by Fred C. Whitney (page images at HathiTrust; US access only)
• Batter tables, for 192 batters from 1/16-in, 1/18-in, 3/16-in, to 12 inches per foot, giving altitude and hypothenuse in feet and decimals of feet for any base measured in feet, inches and sixteenths (Engineering news publishing company, 1906), by Clarence George Wrentmore (page images at HathiTrust)
• Steel construction; a text and reference book of the design of steel framework for buildings (America technical Society, 1939), by Henry Jackson Burt and C. H. Sandberg (page images at HathiTrust)
• Osborn's tables of moments of inertia and squares of radii of gyration, to which have been added tables of the working strengths of steel columns, the working strengths of timber beams and columns, standard loads and unit stresses, and constants for determining stresses in swing bridges. (The Osborn engineering co., 1905), by Frank Chittenden Osborn (page images at HathiTrust)
• Steel construction; a text and reference book covering the design of steel framework for buildings (American technical society, 1914), by Henry Jackson Burt (page images at HathiTrust)
• Steel construction; a manual for architects, engineers and fabricators of buildings and other steel structures. (American Institute of Steel Construction, 1937), by American Institute of Steel Construction (page images at HathiTrust)
• Steel construction : a manual for architects, engineers and fabricators of buildings and other steel structures. (The Institute, 1941), by American Institute of Steel Construction (page images at HathiTrust)
• Tables of moments of inertia and squares of radii of gyration : supplemented by others on the ultimate and safe strength of wrought iron columns, safe strength of timber beams, and constants ... (Engineering News Pub. Co., 1894), by Frank Chittenden Osborn (page images at HathiTrust)
• Tables of moments of inertia and squares of radii of gyration; supplemented by others on the ultimate and safe strength of wrought iron columns (Engineering News Publishing Co., 1892), by Frank Chittenden Osborn (page images at HathiTrust)
• Steel construction; a text and reference book covering the design of steel framework for buildings (American Technical Society, 1924), by Henry Jackson Burt (page images at HathiTrust)
• Structural steel : properties of structural shapes and structural members with tables giving allowable load ... for columns, footings, beams and angles. (American Bridge Company, 1924), by American Bridge Company (page images at HathiTrust)
• Pocket companion for engineers, architects and builders : containing useful information and tables appertaining to the use of steel manufactured by Carnegie Steel Company, Pittsburgh, Pa. (Carnegie Steel Co., 1915), by Carnegie Steel Company (page images at HathiTrust)
• Open hearth structural steel and high grade iron. Beams, channels, angles, tees, Z bars, plates and merchant bars ... (The De Vinne Press, 1901), by Passaic Rolling Mill Company, (page images at HathiTrust)
• Steel construction, a manual for architects, engineers and fabricators of buildings and other steel structures. (American Institute of Steel Construction, 1947), by American Institute of Steel Construction (page images at HathiTrust)
• Tables and diagrams for obtaining the resisting moments of eccentric rivited connections (The Engineering News Publishing Company, 1909), by Edgar Adelbert Rexford (page images at HathiTrust)
• Useful information for engineers, architects, and constructors, and tables of rolled beams, channels, angles, etc. (Cooper, Hewitt & co., 1893), by New Jersey Steel and Iron Co (page images at HathiTrust)
• Batter tables, for 192 batters from 1/16-in, 1/18-in, 3/16-in, to 12 inches per foot, giving altitude and hypothenuse in feet and decimals of feet for any base measured in feet, inches and sixteenths (Engineering news publishing company, 1906), by C Wrentmore (page images at HathiTrust)
• Extracts from Carnegie pocket companion for engineers, architects and builders : condensed information and tables pertaining to structural steel manufactured by Carnegie Steel Company, Pittsburgh, Pa. (Amer. Bridge Co., 1923), by Carnegie Steel Company and American Bridge Company (page images at HathiTrust)
• Wrought iron and steel in construction : convenient rules, formulae, and tables for the strength of wrought iron and steel shapes used as beam, struts, shafts, etc. (The Company?], 1890), by Pencoyd Iron Works (page images at HathiTrust)
• Pocket companion containing useful information & tables pertaining to the use of steel manufactured by Dorman, Long & Co. limited, Middlesbrough, England. (W. Appleyard and Sons, Ltd., Printers], 1910), by Dorman Long (Firm) (page images at HathiTrust)
• Book of weights (Issued by the Peerless Drawn Steel Co., 1918), by Peerless Drawn Steel Co (page images at HathiTrust)
• Anleitung zur statischen Berechnung von Eisenkonstruktionen im Hochbau (J. Springer, 1893), by H. Schloesser (page images at HathiTrust)
• Useful information for architects, engineers and workers in wrought iron (Phoenix Iron Company, in the 1870s), by Phoenix Iron Company (page images at HathiTrust)
• Useful information for architects, engineers, and workers in wrought iron (Printed by J.B. Lippincott Co., 1886), by Phoenix Iron Company (page images at HathiTrust)
• Pocket companion for engineers, architects and builders, containing useful information and tables appertaining to the use of steel. (Carnegie steel co., 1921), by Carnegie Steel Company (page images at HathiTrust)
• Steel construction, a manual for architects, engineers and fabricators of buildings and other steel structures. (New York, 1959), by American Institute of Steel Construction (page images at HathiTrust; US access only)
• Bethlehem structural shapes. (Bethlehem Steel Co., 1926), by Bethlehem Steel Company (page images at HathiTrust)
• Tables of moments of inertia and squares of radii of gyration; supplemented by others on the ultimate and safe strength of wrought iron columns. (Engineering news publishing co., 1889), by Frank Chittenden Osborn (page images at HathiTrust)
• Steel construction; a manual for architects, engineers and fabricators of buildings and other steel structures. (American Institute of Steel Construction, 1943), by American Institute of Steel Construction (page images at HathiTrust)

• Manual of structural design (T.M. Ives & sons, 1946), by Jack Singleton (page images at HathiTrust)
• Manual of structural design. (H.M. Ives, 1947), by Jack Singleton (page images at HathiTrust)
• Structural steel; properties of structural shapes and structural members, with tables giving allowable loads in kips (1000 pounds) for columns, footings, beams and angles. (American bridge company, 1924), by American Bridge Company (page images at HathiTrust)
• Lancaster hand book; general data useful in connection with the design and fabrication of steel plate construction: pressure vessels, smokestacks, storage tanks, bins, towers, dredge pipe, hulls, barges, etc. (Lancaster Iron Works, 1950), by inc Posey Iron Works (page images at HathiTrust; US access only)
• Design manual for high-strength steels (Research and Technology, United States Steel Corp., 1957), by H. Malcolm Priest (page images at HathiTrust)
• Manual of structural design. (H.M. Ives, 1949), by Jack Singleton (page images at HathiTrust)
• Lukens steel company ... [Handbook] (Coatesville, Pa., between 1000 and 1999), by Lukens Steel Company (page images at HathiTrust)
• Manual of structural design (H.M. Ives & Sons, 1938), by Jack Singleton (page images at HathiTrust)
• Manual of structural design (H.M. Ives & Sons, 1933), by Jack Singleton (page images at HathiTrust)
• British standard sections. (Clowes, 1903), by British Standards Institution (page images at HathiTrust)
• Structural steel : properties of structural shapes and structural members with tables giving allowable load ... for columns, footings, beams and angles. (American Bridge Company, 1924), by American Bridge Company (page images at HathiTrust)
• Pocket companion for engineers, architects and builders : containing useful information and tables appertaining to the use of steel. (Manufactured by Carnegie Steel Company, 1923), by Carnegie Steel Company (page images at HathiTrust)
• Properties of steel sections; a reference book for structural engineers and architects, including tables of moments of inertia and radii of gyration of built sections, examples of sections selected from monumental structures, unit stresses, safe loads for columns, plate girder design, design in timber, etc., with only sufficient text to explain their application (McGraw publishing company, 1905), by John Calvart Sample (page images at HathiTrust)
• Pocket companion for engineers, architects and builders : containing useful information and tables appertaining to the use of steel manufactured by Carnegie Steel Company, Pittsburgh, Pa. (Carnegie Steel Co., 1915), by Carnegie Steel Company (page images at HathiTrust)
• Pocket companion for engineers, architects and builders : containing useful information and tables appertaining to the use of steel. (Carnegie Steel Company, 1919), by Carnegie Steel Company (page images at HathiTrust)
• Hand book of useful information, tables, rules, data, and formulae appertaining to the use of steel as manufactured by the Phoenix Iron Co. For the use of engineers, architects and builders. (Press of J. B. Lippincott Company], 1906), by Phoenix Iron Co (page images at HathiTrust)
• Handbook of welded steel pipe. (Welded Pipe Department, Armco Drainage & Metal Products, Inc., Calco Division, 1950), by Inc. Calco Division Armco Drainage and Metal Products (page images at HathiTrust)
• The Brier Hill reference book . (The Brier Hill steel co., 1919), by Youngstown Brier Hill steel company (page images at HathiTrust)
• Hand book of information, tables and data relating to the use of structural steel as manufactured by the Phoenix Iron Co. For the use of engineers, architects and builders. (Philadelphia, 1915), by Phoenix Iron Company (page images at HathiTrust)
• Elliott's weights of steel for engineers, architects, contractors, builders, steel manufacturers and all users of rolled steel (The Penton publishing co., 1916), by Thomas John Elliott (page images at HathiTrust; US access only)
• Pocket companion for engineers, architects & builders containing useful information and tables appertaining to the use of steel. (Carnegie steel co., 1920), by Carnegie Steel Company (page images at HathiTrust)
• Properties of British standard sections : British standard sections (Crosby, Lockwood, 1904), by British Standards Institution (page images at HathiTrust)
• Standard list and diagrams of shapes. (Rogers & Smith Co., 1901), by Jones & Laughlins (page images at HathiTrust)
• Pocket companion for engineers, architects and builders, containing useful information and tables appertaining to the use of steel. (Carnegie steel co., 1921), by Carnegie Steel Company (page images at HathiTrust)
• Structural shapes (The Company, 1921), by Bethlehem Steel Company (page images at HathiTrust)
• Bethlehem rolled steel slabs for column bases, manufactured by Bethlehem Steel Company. ([Bethlehem Steel Company], 1926), by Bethlehem Steel Company (page images at HathiTrust)
• Carnegie beam sections : profiles, properties and safe loads for new series of structural steel beams and column sections manufactured by Carnegie Steel Company, subsidiary of United States Steel Corporation. ([Carnegie Steel Co., 1929), by Carnegie Steel Company (page images at HathiTrust; US access only)
• Bethlehem structural shapes. (Bethlehem Steel Co., 1926), by Bethlehem Steel Company (page images at HathiTrust)
• Bethlehem structural shapes. (Bethlehem Steel Co., 1928), by Bethlehem Steel Company (page images at HathiTrust)
• Bethlehem Steel structural shapes (Bethlehem, Pa. : The Corporation, [1962], 1962), by Bethlehem Steel Company (page images at HathiTrust)

More items available under narrower terms.