The Online Books Page

Structural frames -- Testing

See also what's at your library, or elsewhere.

• Structural frames
• Structural design -- Testing
• Testing

• Airframes -- Testing
• Bars (Engineering) -- Testing
• Girders -- Testing
• Structural frames -- Dynamic testing
• Trusses -- Testing
• Structural frames -- Materials -- Testing
• Structural frames -- Models -- Testing

• Design of a large force biaxial test frame (Concrete & Structural Branch, Division of Research, Engineering and Research Center :, 1980), by L. R. Carpenter, Michael R. O'Shea, and Engineering and Research Center (U.S.). Concrete and Structural Branch (page images at HathiTrust)
• State-of-the-art of structural test methods for walls, floors, roofs, and complete buildings (U.S. Dept. of Commerce, National Bureau of Standards :, 1974), by C. W. C. Yancey, L. E. Cattaneo, Center for Building Technology, United States. National Bureau of Standards, and United States Department of Housing and Urban Development Office of Policy Development and Research (page images at HathiTrust)
• Strength and behavior of reinforced concrete beams and frames (University of Illinois, 1958), by R. Diaz de Cossio, Chester Paul Siess, United States. Army. Corps of Engineers. Ohio River Division, and University of Illinois (Urbana-Champaign campus). Dept. of Civil Engineering (page images at HathiTrust)
• Earthquake-simulation tests of a ten-story reinforced concrete frame with a discontinued first-level beam (University of Illinois, 1978), by Jack P Moehle and Mete Avni Sozen (page images at HathiTrust)
• The theory and practice of modern framed structures, designed for the use of schools, and for engineers in professional practice. (J. Wiley & Sons, etc., etc., 1909), by J. B. Johnson, F. E. Turneaure, and C. W. Bryan (page images at HathiTrust)
• The plastic behavior of structural members and frames : a summary report of demonstration tests conducted during the Summer course: Plastic design in structural steel, sponsored by Lehigh University and the American Institute of Steel Construction (Fritz Engineering Laboratory, Dept. of Civil Engineering, Lehigh University, 1956), by George C. Driscoll and Lynn S. Beedle (page images at HathiTrust; US access only)

• Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Lawrence F. Reardon (page images at HathiTrust)
• Landing approach airframe noise measurement and analysis (National Aeronautics and Space Administration, Scientific and Technical Information Office ;, 1980), by Paul L. Lasagna, Hugh L. Dryden Flight Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office (page images at HathiTrust)
• Full scale crash test evaluation of two load-limiting subfloors for general aviation airframes (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1984), by Huey D. Carden and Langley Research Center (page images at HathiTrust)
• Rapid estimation of frequency response functions by close-range photogrammetry (National Aeronautics and Space Administration, Scientific and Technical Information Branch ;, 1985), by John S. Tripp and Langley Research Center (page images at HathiTrust)
• Analysis of the space shuttle orbiter skin panels under simulated hydrodynamic loads (National Aeronautics and Space Administration, Scientific and Technical Information Division :, 1988), by Huey D. Carden, Lisa E. Jones, and Edwin L. Fasanella (page images at HathiTrust)
• Analytical and experimental investigation of aircraft metal structures reinforced with filamentary composites (National Aeronautics and Space Administration ;, 1971), by S. Oken, Langley Research Center, Boeing Commercial Airplane Company, Boeing Company, and Boeing Company. Commercial Airplane Group (page images at HathiTrust)
• Acceleration of fatigue tests for built-up titanium components (U.S. National Aeronautics and Space Administration ;, 1976), by R. T. Watanabe, United States National Aeronautics and Space Administration, Boeing Company, and Langley Research Center (page images at HathiTrust)
• The effect of various missile characteristics on airframe frequency response (National Advisory Committee for Aeronautics, 1952), by Howard F. Matthews, Walter E. McNeill, United States National Advisory Committee for Aeronautics, and Ames Research Center (page images at HathiTrust)
• Longitudinal acceleration tests of overhead luggage bins and auxiliary fuel tank in a transport airplane airframe (Federal Aviation Administration, Office of Aviation Research ;, 1999), by Robert J. McGuire, Tim Macy, Inc Transportation Research Center, William J. Hughes Technical Center (U.S.), and United States. Federal Aviation Administration. Office of Aviation Research (page images at HathiTrust)
• Video landing parameter survey, John F. Kennedy International Airport (Federal Aviation Administration, Office of Aviation Research ;, 1997), by Thomas DeFiore, Terrence Barnes, Richard Micklos, Federal Aviation Administration Technical Center (U.S.), Naval Air Warfare Center (U.S.), and United States. Office of Aviation Research (page images at HathiTrust)
• An analysis of ground-flight loads measured on the instrumented B-727 N40 (Federal Aviation Administration, Office of Aviation Research ;, 1995), by William M. Cavage, Terence Barnes, Tom DeFiore, Federal Aviation Administration Technical Center (U.S.), Galaxy Scientific Corporation, and United States. Office of Aviation Research (page images at HathiTrust)
• The evaluation of acoustic impact technique for detection of incipients cracks in aircraft components. (Wright-Patterson Air Force Base, Ohio : Air Force Materials Laboratory, Air Force Systems Command, United States Air Force, 1973., 1973), by Boeing Vertol Company and Air Force Materials Laboratory (U.S.) (page images at HathiTrust)
• An Engineering evaluation of methods for the prediction of fatigue life in airframe structures (Wright-Patterson Air Force Base, Ohio : Flight Dynamics Laboratory, Aeronautical Systems Division, AIr Force Systems Command, United States Air Force, 1962., 1962), by W. J. Crichlow, M. A. Melcon, L. Young, A. J. McCulloch, United States. Air Force. Systems Command. Aeronautical Systems Division, Air Force Flight Dynamics Laboratory (U.S.), and Lockheed-California Company (page images at HathiTrust)

• The First Joint DoD/FAA/NASA Conference on Aging Aircraft : 8-10 July 1997, the David Eccles Conference Center, Odgen, Utah : proceedings (U.S. G.P.O., 1998), by Utah) Joint DoD/FAA/NASA Conference on Aging Aircraft (1st : 1997 : Ogden, J. P. Gallagher, U.S. Army Research Laboratory, Naval Air Warfare Center (U.S.), Ohio) Air Force Research Laboratory (Wright-Patterson Air Force Base, United States Federal Aviation Administration, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Scatter factor and reliability of aircraft structures (National Aeronautics and Space Administration ;, 1972), by Gerhart I. Schuëller, Alfred Martin Freudenthal, Langley Research Center, and George Washington University (page images at HathiTrust)
• Axial-load fatigue tests using loading schedules based on maneuver-load statistics. Eugene C. Naumann and Russell L. Schott. (National Aeronautics and Space Administration :, 1962), by Eugene C. Naumann, Russell L. Schott, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Evaluation of energy absorption of new concepts of aircraft composite subfloor intersections (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1989), by Lisa E. Jones, Huey D. Carden, and Langley Research Center (page images at HathiTrust)
• Effect of service usage on tensile, fatigue, and fracture properties of 7075-T6 and 7178-T6 aluminum alloys (National Aeronautics and Space Administration ;, 1975), by Richard A. Everett and Langley Research Center (page images at HathiTrust)
• Influence of salt and elevated-temperature exposure on the maximum compressive strength of titanium-alloy skin-stringer panels (National Aeronautics and Space Administration ;, 1970), by James E. Gardner, Dick M. Royster, and Langley Research Center (page images at HathiTrust)
• Experimenmtal flutter results for corrugation-stiffened and unstiffened panels (National Aeronautics and Space Administration ;, 1966), by Deene J. Weidman and Langley Research Center (page images at HathiTrust)

• A study of the strength of shafts with keyways (1909), by Ollison Craig and James Charles Lund (page images at HathiTrust; US access only)

• A study of girder deflections during bridge deck construction : final report (Virginia Highway Research Council, 1971), by Marvin H. Hilton, United States. Federal Highway Administration, and Virginia Highway Research Council (page images at HathiTrust; US access only)
• An investigation of the load-deformation characteristics of reinforced concrete beams up to the point of failure (Urbana, 1952), by James Raymond Gasten (page images at HathiTrust)
• Spannungskurven in rechteckigen und keilförmigen Trägern; Theorie und Versuch über Spannungsverteilung als Schreibenproblem mit besonderer Berücksichtigung der lokalen Störung. (Berlin, 1928), by Akira Miura (page images at HathiTrust; US access only)
• Analysis of orthotropic beams. (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1979), by Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Reliability formulation for the strength and fire endurance of glued-laminated beams (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985), by D. A. Bender and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Deflection and stresses of tapered wood beams (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1965), by A. Carl Maki, Edward W. Kuenzi, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Axial tension and bending interaction curves for members loaded inelastically (Dept. of Theoretical and Applied Mechanics, University of Illinois, 1952), by Don Orr Brush (page images at HathiTrust)
• Final report on the investigation of the shear strength of concrete frame members without web reinforcement (Dept. of Theoretical and Applied Mechanics, Engineering Experiment Station, University of Illinois, 1955), by Ivan M. Viest and JoDean Morrow (page images at HathiTrust)
• Thermal stresses induced in a composite model bridge structure : prepared for Missouri State Highway Dept. (Civil Engineering Dept., University of Missouri-Rolla, 1977), by Jack H Emanuel, David John Wisch, United States. Federal Highway Administration, University of Missouri--Rolla. Civil Engineering Dept, and Missouri. State Highway Dept (page images at HathiTrust; US access only)
• The fatigue strength of flexural members / Progress report ([University of Illinois, Dept. of Civil Engineering, 1955), by L. R. Hall, James E. Stallmeyer, United States. Bureau of Public Roads, University of Illinois at Urbana-Champaign. Dept. of Civil Engineering, and Welding Research Council (U.S.). Fatigue Committee (page images at HathiTrust; US access only)
• Determination of Strouhal characteristics and power spectrum for elastically restrained H-shape sections (Dept. of Transportation, Federal Highway Administration, Offices of Research and Development ;, 1977), by Michael Chi, G. Dennis Bernard, Eddie Neal, United States. Federal Highway Administration. Office of Development, and United States. Federal Highway Administration. Office of Research (page images at HathiTrust)
• Fatigue of curved steel bridge elements : design recommendations for fatigue of curved plate girder and box girder bridges (Dept. of Transportation, Federal Highway Administration, Office of Research, Structures and Applied Mechanics Division ;, 1980), by J. Hartley Daniels, John W. Fisher, B. T. Yen, and United States. Federal Highway Administration. Structures and Applied Mechanics Division (page images at HathiTrust)
• Torsional effects in stringer beams of skewed bridges : working plan ([Virginia Council of Highway Investigation and Research, 1958), by William Zuk and Virginia Council of Highway Investigation and Research (page images at HathiTrust; US access only)
• Thermal stresses in composite bridge beams : working plan (Virginia Council of Highway Investigation and Research, 1960), by William Zuk and Virginia Council of Highway Investigation and Research (page images at HathiTrust; US access only)
• Calibration of a beam testing machine (1926), by Charles J. Mitchell (page images at HathiTrust; US access only)
• Inelastic design of load carrying members, Part V, Theoretical and experimental creep analyses of beam-columns (Wright-Patterson Air Force Base, Ohio : Aeronautical Systems Division, Air Force Systems Command, United States Air Force, 1962., 1962), by Omar M. Sidebottom, United States. Air Force. Systems Command. Aeronautical Systems Division, and University of Illinois (Urbana-Champaign campus). Department of Theoretical and Applied Mechanics (page images at HathiTrust)
• Welded interior beam-to-column connections (American Institute of Steel Construction, 1959), by J D Graham, R. N. Khabbaz, and A. N. Sherbourne (page images at HathiTrust; US access only)

• Experimental study of frame-wall interaction in reinforced concrete structures subjected to strong earthquake motions (University of Illinois at Urbana-Champaign, 1979), by Daniel Paul Abrams and Mete Avni Sozen (page images at HathiTrust)

• Strength and stiffness of large-gap metal-plate wood connections (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994), by Forest Products Laboratory (U.S.) (page images at HathiTrust; US access only)
• Experimental assessment of wood trusses with square-end webs (U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1996), by Ronald W. Wolfe, Steven M. Cramer, Doug Stahl, and Forest Products Laboratory (U.S.) (page images at HathiTrust)
• Analytical and photogrammetric characterization of a planar tetrahedral truss (National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ;, 1990), by K. Chauncey Wu, Marvin D. Rhodes, Richard R. Adams, and Langley Research Center (page images at HathiTrust)
• Dynamic testing of a two-dimensional box truss beam (National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987), by Charles W. White and Langley Research Center (page images at HathiTrust)

• Evaluation of high-temperature bearing cage materials (National Aeronautics and Space Administration ;, 1967), by Erwin V. Zaretsky, William J. Anderson, and Lewis Research Center (page images at HathiTrust)

• A study of wind pressures on a single-family dwelling in model and full scale (U.S. Dept. of Commerce, National Bureau of Standards ;, 1974), by Richard D. Marshall, United States. National Bureau of Standards, and Institute for Applied Technology (U.S.) (page images at HathiTrust)
• Analysis of structural dynamic data from Skylab (National Aeronautics and Space Administration ;, 1976), by Leonard Demchak, Harry Harcrow, Martin Marietta Corporation, United States National Aeronautics and Space Administration, and George C. Marshall Space Flight Center (page images at HathiTrust)

More items available under narrower terms.