The Online Books Page

Submersible pumps -- Testing

See also what's at your library, or elsewhere.

• Submersible pumps
• Pumping machinery -- Testing
• Testing

• Controlled tests of eductors and submersible pumps (U.S. Army Engineer Waterways Experiment Station, 1994), by James E. Clausner, Dredging Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)

Items below (if any) are from related and broader terms.

• Phase II demonstration : seawater hydraulic transfer pump (Naval Facilities Engineering Service Center, 1996), by Greg Jokela, John Kunsemiller, and Calif.) Naval Facilities Engineering Service Center (Port Hueneme (page images at HathiTrust)

• Maximum volume-to-stress ratio for a two-radii-contour diaphragm pump (Oak Ridge National Laboratory, 1960), by R. D. Cheverton, U.S. Atomic Energy Commission, Union Carbide Corporation, and Oak Ridge National Laboratory. Reactor Experimental Engineering Division (page images at HathiTrust)
• NASA TN D-5225 (National Aeronautics and Space Administration ;, 1969), by Lawrence P. Ludwig, Robert L. Johnson, Thomas N. Strom, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• NASA TN D-6543 (National Aeronautics and Space Administration :, 1971), by William Stevans, Robert J. Blade, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Molten Plutonium Pump Experiment (Los Alamos Scientific Laboratory of the University of California, 1962), by John E. Deverall, G. L. Caldwell, Los Alamos Scientific Laboratory. K- Division, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Dut trial of a 40,000,000-gallon duplex triple expansion Worthington pumping engine (1909), by Eugene Campbell McMillan (page images at HathiTrust; US access only)
• Loss of head in pump valves (1907), by William Emery Brewer (page images at HathiTrust; US access only)
• Loss of head in pump valves (1908), by Theron Robinson Howser (page images at HathiTrust; US access only)
• Relation of speed of centrifugal pumps to height of lift (1906), by Edward J. Mehren (page images at HathiTrust; US access only)
• A study of water rates of prime movers (1913), by Lewis Brown Ermeling (page images at HathiTrust; US access only)
• Test of a De Laval turbo-pump (1906), by Alfred Rittscher Bench and Louis Paul Robert (page images at HathiTrust; US access only)
• Tests of the pumps and wells of the University of Illinois (1914), by John Edwin Lewis and Raymond Thomas Reilly (page images at HathiTrust; US access only)
• The use of compressed air for pumping water (1900), by George Russell Smith (page images at HathiTrust; US access only)
• Selected methods for pumping test analysis (Illinois State Water Survey, 1955), by Jack Bruin, H. E. Hudson, and Illinois State Water Survey (page images at HathiTrust; US access only)
• Selected methods for pumping test analysis (Illinois State Water Survey, 1961), by Jack Bruin, H. E. Hudson, and Illinois State Water Survey (page images at HathiTrust; US access only)

• Factors affecting capacity of air lifts (Idaho Operations Office, U.S. Atomic Energy Commission, 1957), by H. V. Chamberlain, Phillips Petroleum Company. Atomic Energy Division, and U.S. Atomic Energy Commission. Idaho Operations Office (page images at HathiTrust)

• Tests of centrifugal pumps (New Mexico College of Agriculture and Mechanic Arts, 1911), by B. P. Fleming and J. B. Stoneking (page images at HathiTrust)
• Testing of pumps for use in nitric acid-alumina slurry service (U.S. Atomic Energy Commission, Idaho Operations Office, 1963), by E. J. Bailey, Idaho Chemical Processing Plant, Idaho National Reactor Testing Station, and Phillips Petroleum Company. Atomic Energy Division (page images at HathiTrust)
• Development of a mercury electromagnetic centrifugal pump for the SNAP-8 refractory boiler development program (National Aeronautics and Space Administration ;, 1974), by R. A. Fuller, A. W. Schnacke, Lewis Research Center, and General Electric Company (page images at HathiTrust)
• Design, manufacture, and test of coolant pump-motor assembly for Brayton power conversion system (National Aeronautics and Space Administration ;, 1973), by Louis E. Gebacz, Lewis Research Center, and Pesco Products Company (page images at HathiTrust)
• Centrifugal and rotary pumps (1903), by Albert Myron Johnson (page images at HathiTrust; US access only)
• Relation of speed of centrifugal pumps to height of lift (1906), by Edward J. Mehren (page images at HathiTrust; US access only)

• Three-step labyrinth seal for high-performance turbomachines (National Aeronautics and Space Administration, Scientific and Technical Information Office, 1987), by Robert C. Hendricks (page images at HathiTrust)
• Spin test of turbine rotor (National Aeronautics and Space Administration ;, 1972), by Michael H. Vavra, Lawrence E. Bell, James E. Hammer, United States National Aeronautics and Space Administration, and Naval Postgraduate School (U.S.) (page images at HathiTrust)
• NASA TN D-4393 (National Aeronautics and Space Administration ;, 1968), by Roy G. Stabe, John F. Kline, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Experimental findings from zero-tank net positive suction head operation of the J-2 hydrogen pump (National Aeronautics and Space Administration ;, 1972), by Henry P. Stinson, Raymond J. Strickland, and George C. Marshall Space Flight Center (page images at HathiTrust)
• An experimental investigation of two-phase liquid oxygen pumping (National Aeronautics and Space Administration ;, 1973), by Loren A. Gross and George C. Marshall Space Flight Center. Astronautics Laboratory (page images at HathiTrust)
• Analytical and experimental study of dynamic characteristics of turbopumps (National Aeronautics and Space Administration ;, 1968), by H. Ohashi and George C. Marshall Space Flight Center (page images at HathiTrust)

• Duty trial of a producer-gas-engine-driven 26-inch centrifugal pump (1908), by William Bertram Greene (page images at HathiTrust; US access only)

• Centaur space vehicle pressurized propellant feed system tests. (National Aeronautics and Space Administration ;, 1972), by Lewis Research Center (page images at HathiTrust)
• Exploratory tests of two strut fuel injectors for supersonic combustion (National Aeronautics and Space Administration ;, 1974), by Griffin Y. Anderson, Paul B. Gooderum, and Langley Research Center (page images at HathiTrust)

• NASA TN D-4040 (National Aeronautics and Space Administration ;, 1967), by Charles E. Feiler, Marcus F. Heidmann, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Noncavitating and cavitating performance of several low area ratio water jet pumps having throat lengths of 3.54 diameters (National Aeronautics and Space Administration ;, 1969), by Nelson L. Sanger, United States National Aeronautics and Space Administration, and Lewis Research Center (page images at HathiTrust)
• Steam jet pump analysis and experiments (Washington, D.C. : Office of Technical Services, Department of Commerce, 1960., 1960), by Ronald P. Rose, Westinghouse Electric Corporation, U.S. Atomic Energy Commission, and Bettis Atomic Power Laboratory (page images at HathiTrust)
• Controlled tests of eductors and submersible pumps (U.S. Army Engineer Waterways Experiment Station, 1994), by James E. Clausner, Dredging Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)

• Analysis and testing of two-dimensional vented Coanda ejectors with asymmetric variable area mixing sections (National Aeronautics and Space Administration ;, 1976), by Dynatech Corporation, Lewis A. Maroti, United States National Aeronautics and Space Administration, and Ames Research Center (page images at HathiTrust)
• Performance and noise generation studies of supersonic air ejectors (National Aeronautics and Space Administration ;, 1972), by P. S. Barna, Langley Research Center, and Old Dominion University (page images at HathiTrust)
• Analysis and testing of two-dimensional slot nozzle ejectors with variable area mixing sections (National Aeronautics and Space Administration ;, 1973), by Gerald B. Gilbert, Philip G. Hill, Ames Research Center, and Dynatech R/D Company (page images at HathiTrust)
• Experimental study of zero-flow ejectors using gaseous nitrogen (National Aeronautics and Space Administration, 1960), by William Leroy Hill Jones, Carl F. Lorenzo, Harold G. Price, and Lewis Research Center (page images at HathiTrust)
• Performance of a variable divergent-shroud ejector nozzle designed for flight mach numbers up to 3.0 (National Aeronautics and Space Administration, 1961), by Andrew J. Stofan, James R. Mihaloew, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)
• Controlled tests of eductors and submersible pumps (U.S. Army Engineer Waterways Experiment Station, 1994), by James E. Clausner, Dredging Research Program, U.S. Army Engineer Waterways Experiment Station, and United States Army Corps of Engineers (page images at HathiTrust)

• NASA TN D-4392 (National Aeronautics and Space Administration ;, 1968), by Roy G. Stabe, John F. Kline, Lewis Research Center, and United States National Aeronautics and Space Administration (page images at HathiTrust)

• Centrifugal and rotary pumps (1903), by Albert Myron Johnson (page images at HathiTrust; US access only)

• A technique for cryopumping hydrogen (National Aeronautics and Space Administration, 1961), by Jack Grobman and Lewis Research Center (page images at HathiTrust)

• Tests of the University pumps and wells (1906), by Norval Enger (page images at HathiTrust; US access only)

• Your Money's Worth: A Study in the Waste of the Consumer's Dollar (New York: Macmillan, 1927), by Stuart Chase and F. J. Schlink (HTML and page images at LOC)
• Circular - University of Illinois, Engineering Experiment Station. (The Station., 1905), by University of Illinois (Urbana-Champaign campus). Engineering Experiment Station (page images at HathiTrust)
• Circular series (The University, 1939), by University of Illinois (Urbana-Champaign campus). Engineering Experiment Station (page images at HathiTrust)
• Circular. ([Urbana], 1955), by University of Illinois (Urbana-Champaign campus). Engineering Experiment Station (page images at HathiTrust)
• Confidence interval lengths for small numbers of replicates. (Available from the author, 1963), by Raymond H. Pierson (page images at HathiTrust)
• Testing characteristics of consumer products. Hearing, Ninety-first Congress, second session, on S. 3286 ... March 5, 1970. (U.S. Govt. Print. Off., 1971), by United States. Congress. Senate. Committee on Commerce. Consumer Subcommittee (page images at HathiTrust)
• Die werkstoffe für den bau chemischer apparate (O. Spamer, 1928), by Arthur Fürth (page images at HathiTrust; US access only)
• Indentation hardness testing. (Reinhold Pub. Corp., 1949), by Vincent E. Lysaght (page images at HathiTrust)
• Materials testing; theory, practice and significance of physical tests on engineering materials (McGraw-Hill Book Company, 1941), by Herbert James Gilkey, Elmer Otto Bergman, and Glenn Murphy (page images at HathiTrust; US access only)
• Materialprüfung mit Röntgenstrahlen, unter besonderer berücksichtigung der Röntgenmetallographie (J. Springer, 1927), by Richard Glocker (page images at HathiTrust; US access only)
• An outline for work in experimental engineering in the Engineering department of the University of Virginia (University of Virginia, 1919), by Jared Stout Lapham (page images at HathiTrust)
• A manual in the testing of materials (International textbook company, 1937), by Harry Tucker (page images at HathiTrust)
• Méthodes modernes d'essais à l'usine et d'essais relatifs à l'art de tailler les métaux (Delagrave, 1923), by E. Pitois (page images at HathiTrust; US access only)
• Your money's worth; a study in the waste of the consumer's dollar (The Macmillan company, 1936), by Stuart Chase and F. J. Schlink (page images at HathiTrust)
• Lumineszenz-analyse im filtrierten ultravioletten licht; ein hilfsbuch beim arbeiten mit den analysen-lampen (Akademische verlagsgesellschaft m. b. h., 1928), by P. W. Danckwortt (page images at HathiTrust; US access only)
• Lumineszenz-Analyse im filtrierten ultravioletten Licht ; ein Hilfsbuch beim Arbeiten mit den Analysen-Lampen (Akademische Verlagsgesellschaft m.b.H., 1929), by P. W. Danckwortt (page images at HathiTrust; US access only)
• The X-ray examination of materials in industry ... ([Philadelphia, Pa., 1927), by George L. Clark (page images at HathiTrust)
• Engineering inspection practice; a complete guide to the methods, gauges and instruments used in engineering production workshops (Chemical publishing company, inc., 1944), by A. T. King (page images at HathiTrust)
• Experiments with materials and products of industry. (McKnight & McKnight Pub. Co., 1960), by Arthur W. Earl (page images at HathiTrust)
• Sampling procedures and tables for life and reliability testing based on the Weibull distribution (Hazard rate criterion). (Publisher: Office of the Assistant Secretary of Defense (Installations and Logistics); for sale by the Supt. of Docs., U.S. Govt. Print. Off., 1962), by Henry Philip Goode, John H. K. Kao, and United States. Office of the Assistant Secretary of Defense (Installations and Logistics) (page images at HathiTrust)
• Instrumental color measurement of retroreflective highway sign materials. Final report. (1971), by I. Nimeroff (page images at HathiTrust)
• Automotive tape recorder. Volume 2. Development test report. Final report. (1973) (page images at HathiTrust)
• Performance evaluation of the General Motors Hybrid II anthropomorphic test dummy. Final report. (1973), by J. S. Miller (page images at HathiTrust)
• Automotive disc recorder environmental tests. Final report. (1973), by T. D. Dunham and D. C. Scheidt (page images at HathiTrust)
• Measuring pavement roughness spectra using the modified BPR Roughometer with additional refinements. Final report. (1972), by B. E. Quinn and L. M. Smeyak (page images at HathiTrust)
• Laser measurement of pavement surface textures. Final report. (1974), by S. Gee and W. L. King (page images at HathiTrust)
• Road roughness technology, state of the art. Final report. (1973), by Glenn G. Balmer (page images at HathiTrust)
• Binocular and monocular field of view performance test. Final report. (1974), by A. S. Kuroda and D. S. Boyer (page images at HathiTrust)
• Performance characteristics of anthropomorphic dummy joints. Final technical report. (1974), by Mark P. Haffner and C. H. Melton (page images at HathiTrust)
• Influence of windshield tint on the temperature in automobile passenger compartments. Final report. (1974), by W. S. Hurst and M. G. Scroger (page images at HathiTrust)
• Results of the first semi-annual qualification testing of devices to measure breath alcohol. Interim report. (1975), by Arthur L. Flores (page images at HathiTrust)
• Thermodynamics of bridges, roadways and runways. Final report. (1974), by K. M. Pell, J. E. Nydahl, and V. A. Cundy (page images at HathiTrust)
• Investigation of electromagnetic interference effects on motor vehicle electronic control and safety devices. Final report. (1975), by R. H. Espeland, L. R. Teters, l. A. Jacobsen, and E. L. Morrison (page images at HathiTrust)
• The signficance of pavement texture. Final report. (1975), by Glenn G. Balmer (page images at HathiTrust)
• Laboratory evaluation of pavement surface texture characteristics in relation to skid resistance. Final report. (1972), by S. H. Dahir and H. J. Lentz (page images at HathiTrust)
• Hydraulic characteristics of two bicycle-safe grate inlet designs. Final report. (1974), by Ta-chên Woo and J. Sterling Jones (page images at HathiTrust)
• Use of hemispherical beads as pavement marking retroreflectors. Final report. (1975), by K. Vedam and L. Shuler (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Laboratory evaluation. Final report. (1975), by A. G. Klipple and King M. Roberts (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Overview of their adequacy. Final report. (1975), by John V. Fechter, V. J. Pezoldt, J. J. Persensky, and J. R. Lepkowski (page images at HathiTrust)
• Study of the national standards for directional and other official signs. Synthesis report. Final report. (1975), by T. M. Mast (page images at HathiTrust)
• Inductive loop detectors: theory and practice. Final report. (1976), by C. Pinnell (page images at HathiTrust)
• Pavement friction test tire correlation. Final report. (1975), by R. R. Hegmon, S. Weiner, and L. J. Runt (page images at HathiTrust)
• Texturing of concrete pavements. Interim report no. 1. (1975), by Joseph E. Ross and Sheldon M. Law (page images at HathiTrust)
• Road test research of skid resistant bituminous surfaces. Final report. (1975), by J. R. O'Leary and R. Gerard Ward (page images at HathiTrust)
• Performance evaluation of the NHTSA advanced "S" series 50th percentile anthropomorphic dummy. Volume I - technical report. Final report. (1976), by D. E. Massing and P. E. Yates (page images at HathiTrust)
• Performance evaluation of the NHTSA advanced "S" series 50th percentile anthropomorphic dummy. Volume II - accelerator sled test data. Final report. (1976), by D. E. Massing and P. E. Yates (page images at HathiTrust)
• Pavement surface dynamics friction measurement and analysis in Kansas. Final report. (1976), by H. E. Worley, T. M. Metheny, and F. W. Stratton (page images at HathiTrust)
• Effects of pavement grooving on friction, braking, and vehicle control. Final report. (1976), by J. E. Martinez, R. D. Young, and Wayne C. Faatz (page images at HathiTrust)
• Improved skid resistant pavements. Demonstration project no. 10. Final report. (1976), by R. F. Pelletier (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume I - summary report. Final report. (1977), by V. A. Grasso (page images at HathiTrust)
• A study of rigid polyurethane foam. Volume II - final report. (1977), by V. A. Grasso (page images at HathiTrust)
• Laboratory measurement of vehicle characteristics for predicting highway behavior. Final report. (1976), by B. E. Quinn and D. E. Gevers (page images at HathiTrust)
• Measurement of hydroplaning potential. Final report. (1977), by Satish Kumar Agrawal, W. E. Meyer, and John J. Henry (page images at HathiTrust)
• Tire-pavement interface variability. Volume II - technical report. Final report. (1977), by Gordon G. Hayes (page images at HathiTrust)
• Tire-pavement interface variability. Volume I - summary report. Final report. (1977), by Gordon G. Hayes (page images at HathiTrust)
• Battery explosion tests and labeling. Final report. (1978) (page images at HathiTrust)
• Dynamic testing of luminaire supports with an improved pendulum impact facility. Final report. (1978), by D. B. Chisholm and L. C. Meczkowski (page images at HathiTrust)
• Regulatory signs for lane occupancy and parking. Final report. (1978), by Donald A. Gordon (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume I - summary report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume II - technical report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Identification of superior energy-absorbing materials for school bus interiors: Volume III - appendices report. Final report. (1980), by L. S. Pauls (page images at HathiTrust)
• Laboratory evaluation of existing breakaway structures. Volume I: executive summary. Final report. (1980), by J. A. Bloom and John A. Hinch (page images at HathiTrust)
• Laboratory evaluation of existing breakaway structures. Volume II: technical results. Final report. (1980), by J. A. Bloom and John A. Hinch (page images at HathiTrust)
• Field strength measurements of speed measuring radar units. Interim report. (1981), by Ramon C. Baird, R. L. Lewis, D. P. Kremer, and Stanley B. Kilgore (page images at HathiTrust)
• Skid resistance of pavement marking materials. Volume I. Final report. (1981), by John J. Henry, D. A. Anderson, and G. F. Hayhoe (page images at HathiTrust)
• Implementation of an automated rating procedure for pavement surface roughness. Final report. (1982), by James C. Wambold, W. H. Park, and G. F. Hayhoe (page images at HathiTrust)
• International conference on wheel/rail load and displacement measurement techniques. Proceedings. (Government Printing Office, Washington, D.C., 1981), by Pin Tong, R. Greif, and 19-20 Jan 1981 International Conference on Wheel/Rail Load and Displacement Measurement Techniques (page images at HathiTrust)
• Acceptance standards for nondestructive test not required by classification (phase I). (1983), by D. Ku and D. Cantore (page images at HathiTrust; US access only)
• Pavement friction measurements on nontangent sections of roadways. Volume II: comprehensive report. Final report. (1983), by Richard A. Zimmer and R. D. Tonda (page images at HathiTrust)
• Calibration services for pavement survey equipment. Final report. (1983), by P. B. Moreland (page images at HathiTrust)
• Calibration services for pavement survey equipment. Executive summary. Final report. (1982), by P. B. Moreland (page images at HathiTrust)
• Pavement friction measurements on nontangent sections of roadways. Volume III. Appendices. Final report. (1983), by Richard A. Zimmer and R. D. Tonda (page images at HathiTrust)
• Limited electromagnetic interference testing of evidential breath testers. (1983) (page images at HathiTrust)
• Full-scale testing of devices to reduce splash and spray from heavy trucks. Final report. (1985), by Walter A. Johnson, A. C. Stein, and Jeffrey R. Hogue (page images at HathiTrust)
• Evaluation of long-life pavement markings. First interim report. (1984), by James E. Bryden and Gary F. Gurney (page images at HathiTrust)
• Acceptance standards for nondestructive test not required by classification (phase II) (1985) (page images at HathiTrust; US access only)
• Abrasive testing cabinets - a state of the art study. (1985), by W. H. Radut (page images at HathiTrust; US access only)
• Cable guiderail tension. Interim report. (1985), by Wayne D. Kenyon (page images at HathiTrust)
• Bridge deck designs for railing impacts. Final report. (1985), by Althea Arnold and T. J. Hirsch (page images at HathiTrust)
• Pavement surface texture: significance and measurement. Volume I - summary report. (1984), by James C. Wambold and John J. Henry (page images at HathiTrust)
• Pavement surface texture: significance and measurement. Volume II - comprehensive report. Final report. (1984), by James C. Wambold, John J. Henry, and R. R. Blackburn (page images at HathiTrust)
• A comprehensive study of roadmeter roughness number with riding comfort for Indiana pavements. Executive summary. (1985), by Mark D. Harness, S. Gulen, Virgil L. Anderson, and K. J. Kercher (page images at HathiTrust)
• A comprehensive study of roadmeter roughness number with riding comfort for Indiana pavements. Final report. (1985), by Mark D. Harness, S. Gulen, Virgil L. Anderson, and K. J. Kercher (page images at HathiTrust)
• Crash padding research. Volume I: material mechanical properties. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
• Crash padding research. Volume II: constitutive equation models. Final report. (1986), by Oscar Orringer, Kevin T. Knadle, and J. F. Mandell (page images at HathiTrust)
• Development and implementation of a rear vision device test protocol. Volume I - physical characteristics measurements. Final report. (1987), by William J. Burger and D. Ziedman (page images at HathiTrust)
• Development and implementation of a rear vision device test protocol. Volume II - simulated-use testing. Final report. (1987), by William J. Burger and D. Ziedman (page images at HathiTrust)
• A summary of experimental concrete pavements in New York. Final report. (1988), by J. M. Vyce (page images at HathiTrust)
• Door latch integrity. Final report. (1988), by Donald T. Willke, Michael W. Monk, Lisa K. Sullivan, and D. S. Cohen (page images at HathiTrust)
• Procedures for controlling the effect of increased tire pressure on asphalt concrete pavement damage. Final report. (1988), by Ok-Kee Kim, Chris A. Bell, and James E. Wilson (page images at HathiTrust)
• Examination of blistering of fiberglass reinforced laminates. Final report. (1987), by D. Wirth, G. R. Hattery, D. Ensminger, J. Stets, and R. Dick (page images at HathiTrust; US access only)
• Corrosion protection by calcite-type coatings. (1989) (page images at HathiTrust; US access only)
• Evaluation of bituminous pavements for high pressure truck tires. Final report. (1990), by Prithvi S. Kandhal, Stephen A. Cross, and E. R. Brown (page images at HathiTrust)
• Evaluation of bituminous pavements for high pressure truck tires. Executive summary and implementation plan. Final report. (1990), by Prithvi S. Kandhal, Stephen A. Cross, and E. R. Brown (page images at HathiTrust)
• Aggregates and skid resistance (1990), by Kathleen T. Diringer (page images at HathiTrust)
• Signs on breakaway barricades - wind and crash tests. Final report. (1990), by Thomas D. Davis (page images at HathiTrust)
• The development of a strategy for the implementation of full-scale accelerated pavement testing for the Texas Highway Department. Final report. (1990), by Frederick Hugo, B. Frank McCullough, and B. van der Walt (page images at HathiTrust)
• Evaluation and implementation of the roughness measuring subsystem of the ARAN unit. (1991), by J. Lu, C. B. Bertrand, and W. Ronald Hudson (page images at HathiTrust)
• Evaporation test variability study. Final report. (1993), by C. Anthony and L. Mackowiak (page images at HathiTrust)
• Innovative inspection techniques (Groton, Conn. : U.S. Coast Guard Research and Development Center ; Springfield, Va. : Available through the National Technical Information Service, [1993], 1993), by Michael J. Goodwin, Edward F. McClave, MAR Incorporated, U.S. Coast Guard Research & Development Center, and Logistics United States. Coast Guard. Office of Engineering (page images at HathiTrust)
• Field evaluation of the Radar Control Systems (RCS) radar anti-collision warning system. (1990), by A. C. Stein, R. A. Solomon, and D. A. Ziedman (page images at HathiTrust)
• Crashworthiness analysis of commuter aircraft seats. (1993), by D. H. Laananen (page images at HathiTrust)
• Estimating damage effects of dual vs. wide base tires with multidepth deflectometers. (1992), by Tayyeb Akram and Thomas Scullion (page images at HathiTrust)
• Door latch integrity study: evaluation of door latch failure modes. Final report. (1994), by J. Gavin Howe, M. Leigh, and Donald T. Willke (page images at HathiTrust)
• Detectable warnings: testing and performance evaluation at transit stations. Final report. (1994), by H. N. Ketola and David Chia (page images at HathiTrust)
• Pavement primary response to dynamic loading. (1997), by William Kenis, David George, and Jamel Hammouda (page images at HathiTrust)
• LTPP data analysis. Phase 1: validation of guidelines for k-value selection and concrete pavement performance prediction. (1997), by Kathleen T. Hall, Michael I. Darter, Todd E. Hoerner, and Lev Khazanovich (page images at HathiTrust)
• OECD DIVINE element 1: accelerated dynamic pavement testing. (1998), by William Kenis and W. Wang (page images at HathiTrust)
• Road simulator study of heavy-vehicle wheel forces. (1998), by D. A. Streit, Bohdan T. Kulakowski, P. E. Sebaaly, and R. J. Wollyung (page images at HathiTrust)
• Investigation of development of pavement roughness. (1998), by Rohan W. Perera, C. Byrum, and Starr D. Kohn (page images at HathiTrust)
• Development of a methodology for posting load limits on load-zoned pavements: interim report. (1997), by S. W. Park and E. G. Fernando (page images at HathiTrust)
• Data collection and modeling requirements for assessing transportation impacts of micro-scale design. (2000) (page images at HathiTrust)
• Recommendations for establishing the Texas Roadway Research Implementation Center. (1998), by J. J. Allan, A. Smit, and P. Warren (page images at HathiTrust)
• Testing and evaluation of the solar panel sign support system. (2001), by D. Lance Bullard, R. P. Blight, Wanda L. Menges, and S. K. Schoeneman (page images at HathiTrust)
• Flammability of automotive child restraint seats for use in aircraft. (2001), by Richard Johnson and Lindsey Wuethrich (page images at HathiTrust)
• Development of test scenarios for off-roadway crash countermeasures based on crash statistics. (2002), by Wassim Najm, J. A. Koopmann, Linda Ng Boyle, and D. Smith (page images at HathiTrust)
• Development of a tire/pavement contact-stress model based on artificial neural networks. (2001), by Moustafa El-Gindy and Heidi Lewis (page images at HathiTrust)
• [Analysis of Texas Department of Transportation thickness measurement procedures for thermoplastic pavement markings] (2002), by Timothy J. Gates and H. Gene Hawkins (page images at HathiTrust)
• An evaluation of existing tire pressure monitoring systems. (2001), by Paul Arthur Grygier, W. R. Garrott, Elizabeth N. Mazzae, J. D. MacIsaac, Richard L. Hoover, Devin Elsasser, and Thomas A. Ranney (page images at HathiTrust)
• Pavement smoothness index relationships: final report. (2002), by Kelly L. Smith, Leslie Titus-Glover, and Lynn D. Evans (page images at HathiTrust)
• Integrating deflection and ground penetrating radar data for pavement evaluation (Texas Transportation Institute, Texas A&M University System ;, 2006), by Wenting Liu, Thomas Scullion, Texas Transportation Institute, and Texas. Department of Transportation. Research and Technology Implementation Office (page images at HathiTrust)
• The application of X-ray crystal analysis to industrial problems. (H.M.S.O. [printed by Harrison], 1931), by Great Britain. Dept. of Scientific and Industrial Research. Committee on Application of X-ray Methods to Industrial Research and William Henry Bragg (page images at HathiTrust)
• Noncommissioned Officer Education System (NCOES) : considerations for testing-out and awarding equivalent credit (U.S. Army Research Institute for the Behavioral and Social Sciences, 2008), by Richard L. Wampler, Paul N. Blankenbeckler, and U.S. Army Research Institute for the Behavioral and Social Sciences (page images at HathiTrust)
• Engineering inspection, measurement and testing (Philosophical Library, 1956), by H. C. Town and Reginald Colebourne (page images at HathiTrust)
• Testing by the National Bureau of Standards : policy, general information, fee schedule (U.S. Dept. of Commerce, National Bureau of Standards, 1949), by United States. National Bureau of Standards (page images at HathiTrust)
• A manual on industrial radiography with radium (New York, 1942), by New York Canadian Radium & Uranium Corporation (page images at HathiTrust; US access only)
• Circular (The University, 1905), by University of Illinois (Urbana-Champaign campus). Engineering Experiment Station (page images at HathiTrust)
• Performance of cotton varieties in Texas, 1948-50 (College Station, Texas : Texas Agricultural Experiment Station : Texas Agricultural Extension Service, 1951., 1951), by D. T. Killough, F. C. Elliott, T. R. Richmond, E. F. McFarland, United States Department of Agriculture, Texas Agricultural Extension Service, and Texas Agricultural Experiment Station (page images at HathiTrust)
• Index to the reports of the tests of metals and other materials made with the United States testing machine at Watertown Arsenal, Mass., and to the reports of the United States board for the tests of metals, from 1881 to 1912, both inclusive. (Govt. print. off., 1913), by United States Army Ordnance Department (page images at HathiTrust)
• Das Materialprüfungswesen (F. Enke, 1912), by F. W. Hinrichsen and Adolf Martens (page images at HathiTrust; US access only)
• Mitteilungen. (Springer., 1883), by Technische Hochschule Berlin. Materialprüfungsamt, Technische Hochschule Berlin. Mechanisch-Technische Versuchs-Anstalt, and Berlin. Chemischtechnische Versuchs-Anstalt (page images at HathiTrust)
• Calibration and related measurement services of the National Bureau of Standards (Office of Measurement Services, National Bureau of Standards :, 1982), by L. J. Kieffer (page images at HathiTrust)
• Calibration and test services of the National Bureau of Standards. (For sale by the Supt. of Docs., U.S. G.P.O., 1970), by United States. National Bureau of Standards (page images at HathiTrust; US access only)
• Memoirs of deceased American investigators who have contributed in a marked degree to the advance of the testing of materials. ([Philadelphia? Pa., 1906), by Gaetano Lanza (page images at HathiTrust)
• American genealogies which have been printed in book form. (H. T. Coates & company, 1897), by Thomas Allen Glenn (page images at HathiTrust)
• Report of the tests of metals and other materials for industrial purposes, made with the United States testing machine at Watertown arsenal, Massachusetts. (Govt. Print. Off., 1887), by United States Army Ordnance Department and Watertown Arsenal (Mass.) (page images at HathiTrust)
• University of Illinois Engineering Experiment Station circular <no. 71-> (The Station, 1955), by University of Illinois (Urbana-Champaign campus). Engineering Experiment Station (page images at HathiTrust; US access only)
• Analytical techniques : a compilation. (Technology Utilization, National Aeronautics and Space Administration, 1975), by United States National Aeronautics and Space Administration (page images at HathiTrust)
• Measurement, testing, and safety technology : a compilation. (Technology Utilization, National Aeronautics and Space Administration ;, 1974), by United States. National Aeronautics and Space Administration. Office of Technology Utilization (page images at HathiTrust)
• Ground water development for pump irrigation (College Station, Texas : Agricultural Extension Service, Texas A. & M. College System, [1953], 1953), by Robert V. Thurmond, Texas Agricultural and Mechanical College System. Agricultural Extension Service, and United States Department of Agriculture (page images at HathiTrust; US access only)
• Calibration and related measurement services of the National Bureau of Standards (Office of Measurement Services, National Bureau of Standards :, 1981), by Lee Joseph Kieffer (page images at HathiTrust)
• Calibration and test services of the National Bureau of Standards. (For sale by the Supt. of Docs., U.S. G.P.O., 1965), by United States. National Bureau of Standards (page images at HathiTrust; US access only)
• Waste of the consumer's dollar. (The Macmillan company, 1940), by Stuart Chase and F. J. Schlink (page images at HathiTrust; US access only)
• Your money's worth; a study in the waste of the consumer's dollar. (The Macmillan Co., 1934), by Stuart Chase and F. J. Schlink (page images at HathiTrust; US access only)
• Techniques for the evaluation of amines as uranium extractants and properties of some satisfactory amines : topical report WIN-61 (Winchester, Massachusetts : National Lead Company, Inc., Raw Materials Development Laboratory, 1957., 1957), by Henry G. Petrow, Charles F. Lubinger, Robert W. Lindstrom, J. Apidianakis, Oscar A. Nietzel, National Lead Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Pilot plant studies of atmospheric and pressure leaching of uranium ores in alkaline solutions : topical report WIN-73 (Winchester, Massachusetts : National Lead Company, Inc., Raw Materials Development Laboratory, 1957., 1957), by R. G. Beverly, W. A. Millsap, G. Winslow, National Lead Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Oxidants in carbonate leaching of uraniferous ores : topical report WIN-86 (Winchester, Massachusetts : National Lead Company, Inc., Raw Materials Development Laboratory, 1957., 1957), by P. Magno, M. A. DeSesa, National Lead Company, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Multiple HEPA filter test methods : January--December 1976 (Los Alamos, New Mexico : Los Alamos National Laboratory, 1977., 1977), by Burton Schuster, Thomas Kyle, Dan Osetek, United States. Energy Research and Development Administration, Los Alamos Scientific Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Space nuclear safety and fuels program : January 1981 (Los Alamos, New Mexico : Los Alamos National Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Milliwatt Generator Project : October 1980-March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by W. J. Maraman, W. A. Jr Stark, G. H. Rinehart, T. H. Feiertag, C. C. Land, C. E. Frantz, R. A. Kent, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Space nuclear safety and fuels program : March 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Space nuclear safety and fuels program : April 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by S. E. Bronisz, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• Milliwatt generator project : April-September 1981 (Los Alamos, New Mexico : Los Alamos Scientific Laboratory, 1981., 1981), by W. J. Maraman, W. A. Jr Stark, G. H. Rinehart, T. H. Feiertag, C. C. Land, C. E. Frantz, R. A. Kent, Los Alamos Scientific Laboratory, and United States. Department of Energy (page images at HathiTrust)
• SNAP-27 radioisotopic heat source summary report (Miamisburg, Ohio : Mound Laboratory, 1969., 1969), by D. L. Prosser, Monsanto Chemical Company, Mound Laboratory, and U.S. Atomic Energy Commission (page images at HathiTrust)
• Fueled viking generator SN 106 acceptance vibration test report. (Miamisburg, Ohio : Mound Laboratory, 1976., 1976), by Charles G. Anderson, Stanley G. Abrahamson, Charles O. Brewer, Monsanto Chemical Company, Mound Laboratory, and United States. Energy Research and Development Administration (page images at HathiTrust)
• Design, testing, and fabrication of heat sources for underwater application (Miamisburg, Ohio : Mound Laboratory, 1975., 1975), by D. F. Luthy, C. G. Anderson, United States. Energy Research and Development Administration, Monsanto Chemical Company, and Mound Laboratory (page images at HathiTrust)
• Development of pass schedule for rolling narrow uranium strip (Cincinnati, Ohio : National Lead Company of Ohio, 1958., 1958), by John F. Schiltz, John W. Magoun, U.S. Atomic Energy Commission, and National Lead Company of Ohio. Feed Materials Production Center (page images at HathiTrust)
• A 4-year provenance test of jack pine (Michigan State University, Agricultural Experiment Station, 1973), by David S. Canavera and J. W. Wright (page images at HathiTrust; US access only)
• Error profile for multiple-frame surveys (U.S. Dept. of Agriculture, Economics, Statistics, and Cooperatives Service, 1979), by Norman D. Beller and Statistics United States. Department of Agriculture. Economics (page images at HathiTrust)
• Om materialprøvningens udvikling i norden og om Statsprøveanstaltens virksomhed. On the development of testing of materials in the north and on the work of the Danish States testing laboratory in Copenhagen (English translation) (Trykt hos J. Jørgensen & Co. (M.A. Hannover), 1909), by Copenhagen (Denmark). Statspøveanstalten and International Association for Testing Materials 1909 : Copenhagen) (page images at HathiTrust; US access only)

More items available under broader and related terms at left.